In this study,artificial neural networks(ANNs)were implemented to determine design parameters for an impressed current cathodic protection(ICCP)prototype.An ASTM A36 steel plate was tested in 3.5%NaCl solution,seawate...In this study,artificial neural networks(ANNs)were implemented to determine design parameters for an impressed current cathodic protection(ICCP)prototype.An ASTM A36 steel plate was tested in 3.5%NaCl solution,seawater,and NS4 using electrochemical impedance spectroscopy(EIS)to monitor the evolution of the substrate surface,which affects the current required to reach the protection potential(Eprot).Experimental data were collected as training datasets and analyzed using statistical methods,including box plots and correlation matrices.Subsequently,ANNs were applied to predict the current demand at different exposure times,enabling the estimation of electrochemical parameters(limiting voltage values)that can be used to optimize a self-regulating ICCP system.The obtained electrochemical parameters were then used,through Particle Swarm Optimization(PSO),to fine-tune an ANN-based proportional-integral-derivative(PID)controller for the ICCP system.展开更多
Core power is a key parameter of nuclear reactor.Traditionally,the proportional-integralderivative(PID)controllers are used to control the core power.Fractional-order PID(FOPID)controller represents the cutting edge i...Core power is a key parameter of nuclear reactor.Traditionally,the proportional-integralderivative(PID)controllers are used to control the core power.Fractional-order PID(FOPID)controller represents the cutting edge in core power control research.In comparing with the integer-order models,fractional-order models describe the variation of core power more accurately,thus provide a comprehensive and realistic depiction for the power and state changes of reactor core.However,current fractional-order controllers cannot adjust their parameters dynamically to response the environmental changes or demands.In this paper,we aim at the stable control and dynamic responsiveness of core power.Based on the strong selflearning ability of artificial neural network(ANN),we propose a composite controller combining the ANN and FOPID controller.The FOPID controller is firstly designed and a back propagation neural network(BPNN)is then utilized to optimize the parameters of FOPID.It is shown by simulation that the composite controller enables the real-time parameter tuning via ANN and retains the advantage of FOPID controller.展开更多
By combining the Back-Propagation （BP） neural network with conventional proportional Integral Derivative （PID） controller, a new temperature control strategy of the export steam in supercritical electric power pla...By combining the Back-Propagation （BP） neural network with conventional proportional Integral Derivative （PID） controller, a new temperature control strategy of the export steam in supercritical electric power plant is put forward. This scheme can effectively overcome the large time delay, inertia of the export steam and the influencee of object in varying operational parameters. Thus excellent control quality is obtaitud. The present paper describes the development and application of neural network based controller to control the temperature of the boiler＇s export steam. Through simulation in various situations, it validates that the control quality of this control system is apparently superior to the conventional PID control system.展开更多
Guided by the principle of neural network,an intelligent PID controller based on neural network is devised and applied to control of constant temperature and constant liquidlevel system.The experiment results show tha...Guided by the principle of neural network,an intelligent PID controller based on neural network is devised and applied to control of constant temperature and constant liquidlevel system.The experiment results show that this controller has high accuracy and strong robustness and good characters.展开更多
For a class of complex industrial processes with strong nonlinearity, serious coupling and uncertainty, a nonlinear decoupling proportional-integral-differential （PID） controller is proposed, which consists of a tra...For a class of complex industrial processes with strong nonlinearity, serious coupling and uncertainty, a nonlinear decoupling proportional-integral-differential （PID） controller is proposed, which consists of a traditional PID controller, a decoupling compensator and a feedforward compensator for the unmodeled dynamics. The parameters of such controller is selected based on the generalized minimum variance control law. The unmodeled dynamics is estimated and compensated by neural networks, a switching mechanism is introduced to improve tracking performance, then a nonlinear decoupling PID control algorithm is proposed. All signals in such switching system are globally bounded and the tracking error is convergent. Simulations show effectiveness of the algorithm.展开更多
Over 1.3 million people die annually in traffic accidents,and this tragic fact highlights the urgent need to enhance the intelligence of traffic safety and control systems.In modern industrial and technological applic...Over 1.3 million people die annually in traffic accidents,and this tragic fact highlights the urgent need to enhance the intelligence of traffic safety and control systems.In modern industrial and technological applications and collaborative edge intelligence,control systems are crucial for ensuring efficiency and safety.However,deficiencies in these systems can lead to significant operational risks.This paper uses edge intelligence to address the challenges of achieving target speeds and improving efficiency in vehicle control,particularly the limitations of traditional Proportional-Integral-Derivative(PID)controllers inmanaging nonlinear and time-varying dynamics,such as varying road conditions and vehicle behavior,which often result in substantial discrepancies between desired and actual speeds,as well as inefficiencies due to manual parameter adjustments.The paper uses edge intelligence to propose a novel PID control algorithm that integrates Backpropagation(BP)neural networks to enhance robustness and adaptability.The BP neural network is first trained to capture the nonlinear dynamic characteristics of the vehicle.Thetrained network is then combined with the PID controller to forma hybrid control strategy.The output layer of the neural network directly adjusts the PIDparameters(k_(p),k_(i),k_(d)),optimizing performance for specific driving scenarios through self-learning and weight adjustments.Simulation experiments demonstrate that our BP neural network-based PID design significantly outperforms traditional methods,with the response time for acceleration from 0 to 1 m/s improved from 0.25 s to just 0.065 s.Furthermore,real-world tests on an intelligent vehicle show its ability to make timely adjustments in response to complex road conditions,ensuring consistent speed maintenance and enhancing overall system performance.展开更多
The hydraulic roll bending control system usually has the dynamic characteristics of nonlinearity, slow time variance and strong outside interference in the roiling process, so it is difficult to establish a precise m...The hydraulic roll bending control system usually has the dynamic characteristics of nonlinearity, slow time variance and strong outside interference in the roiling process, so it is difficult to establish a precise mathemati- cal model for control. So, a new method for establishing a hydraulic roll bending control system is put forward by cerebellar model articulation controller （CMAC） neural network and proportional-integral-derivative （PID） coupling control strategy. The non-linear relationship between input and output can be achieved by the concept mapping and the actual mapping of CMAC. The simulation results show that, compared with the conventional PID control algo- rithm, the parallel control algorithm can overcome the influence of parameter change of roll bending system on the control performance, thus improve the anti jamming capability of the system greatly, reduce the dependence of con- trol performance on the accuracy of the analytical model, enhance the tracking performance of hydraulic roll bending loop for the hydraulic and roll bending force and increase system response speed. The results indicate that the CMAC-P1D coupling control strategy for hydraulic roll bending system is effective.展开更多
Conventional open-loop deep brain stimulation(DBS)systems with fixed parameters fail to accommodate interindividual pathological differences in Parkinson's disease(PD)management while potentially inducing adverse ...Conventional open-loop deep brain stimulation(DBS)systems with fixed parameters fail to accommodate interindividual pathological differences in Parkinson's disease(PD)management while potentially inducing adverse effects and causing excessive energy consumption.In this paper,we present an adaptive closed-loop framework integrating a Yogi-optimized proportional–integral–derivative neural network(Yogi-PIDNN)controller.The Yogi-augmented gradient adaptation mechanism accelerates the convergence of general PIDNN controllers in high-dimensional nonlinear control systems while reducing control energy usage.In addition,a system identification method establishes input–output dynamics for pre-training stimulation waveforms,bypassing real-time parameter-tuning constraints and thereby enhancing closed-loop adaptability.Finally,a theoretical analysis based on Lyapunov stability criteria establishes a sufficient condition for closed-loop stability within the identified model.Computational validations demonstrate that our approach restores thalamic relay reliability while reducing energy consumption by(81.0±0.7)%across multi-frequency tests.This study advances adaptive neuromodulation by synergizing data-driven pre-training with stability-guaranteed real-time control,offering a novel framework for energy-efficient and personalized Parkinson's therapy.展开更多
To speedily regulate and precisely control a hydraulic power system in a unmanned walking platform(UWP),based on the brief analysis of digital PID and its shortcomings,dual control parameters in a hydraulic power syst...To speedily regulate and precisely control a hydraulic power system in a unmanned walking platform(UWP),based on the brief analysis of digital PID and its shortcomings,dual control parameters in a hydraulic power system are given for the precision requirement,and a control strategy for dual relative control parameters in the dual loop PID is put forward,a load and throttle rotation-speed response model for variable pump and gasoline engine is provided according to a physical process,a simplified neural network structure PID is introduced,and formed mixed neural network PID(MNN PID)to control rotation speed of engine and pressure of variable pump,calculation using the back propagation(BP)algorithm and a self-adapted learning step is made,including a mathematic principle and a calculation flow scheme,the BP algorithm of neural network PID is trained and the control effect of system is simulated in Matlab environment,real control effects of engine rotation speed and variable pump pressure are verified in the experimental bench.Results show that algorithm effect of MNN PID is stable and MNN PID can meet the adjusting requirement of control parameters.展开更多
A back propagation （BP） neural network mathematical model was established to investigate the maneuvering control of an air cushion vehicle （ACV）. The calculation was based on four-freedom-degree model experiments ...A back propagation （BP） neural network mathematical model was established to investigate the maneuvering control of an air cushion vehicle （ACV）. The calculation was based on four-freedom-degree model experiments of hydrodynamics and aerodynamics. It is necessary for the ACV to control the velocity and the yaw rate as well as the velocity angle at the same time. The yaw rate and the velocity angle must be controlled correspondingly because of the whipping, which is a special characteristic for the ACV. The calculation results show that it is an efficient way for the ACV＇s maneuvering control by using a BP neural network to adjust PID parameters online.展开更多
A controller based on a PID neural network （PIDNN） is proposed for an arc welding power source whose output characteristic in responding to a given value is quickly and intelligently controlled in the welding proces...A controller based on a PID neural network （PIDNN） is proposed for an arc welding power source whose output characteristic in responding to a given value is quickly and intelligently controlled in the welding process. The new method syncretizes the PID control strategy and neural network to control the welding process intelligently, so it has the merit of PID control rules and the trait of better information disposal ability of the neural network. The results of simulation show that the controller has the properties of quick response, low overshoot, quick convergence and good stable accuracy, which meet the requirements for control of the welding process.展开更多
The heating technological requirement of the conventional PID control is difficult to guarantee which based on the precise mathematical model,because the heating furnace for heating treatment with the big inertia,the ...The heating technological requirement of the conventional PID control is difficult to guarantee which based on the precise mathematical model,because the heating furnace for heating treatment with the big inertia,the pure time delay and nonlinear time-varying.Proposed one kind optimized variable method of PID controller based on the genetic algorithm with improved BP network that better realized the completely automatic intelligent control of the entire thermal process than the classics critical purporting(Z-N)method.A heating furnace for the object was simulated with MATLAB,simulation results show that the control system has the quicker response characteristic,the better dynamic characteristic and the quite stronger robustness,which has some promotional value for the control of industrial furnace.展开更多
A closed-chain robot has several advantages over an open-chain robot, such as high mechanical rigidity, high payload, high precision. Accurate trajectory control of a robot is essential in practical-use. This paper pr...A closed-chain robot has several advantages over an open-chain robot, such as high mechanical rigidity, high payload, high precision. Accurate trajectory control of a robot is essential in practical-use. This paper presents an adaptive proportional integral differential （PID） control algorithm based on radial basis function （RBF） neural network for trajectory tracking of a two-degree-of-freedom （2-DOF） closed-chain robot. In this scheme, an RBF neural network is used to approximate the unknown nonlinear dynamics of the robot, at the same time, the PID parameters can be adjusted online and the high precision can be obtained. Simulation results show that the control algorithm accurately tracks a 2-DOF closed-chain robot trajectories. The results also indicate that the system robustness and tracking performance are superior to the classic PID method.展开更多
In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a...In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.展开更多
Web service applications are increasing tremendously in support of high-level businesses.There must be a need of better server load balancing mechanism for improving the performance of web services in business.Though ...Web service applications are increasing tremendously in support of high-level businesses.There must be a need of better server load balancing mechanism for improving the performance of web services in business.Though many load balancing methods exist,there is still a need for sophisticated load bal-ancing mechanism for not letting the clients to get frustrated.In this work,the ser-ver with minimum response time and the server having less traffic volume were selected for the aimed server to process the forthcoming requests.The Servers are probed with adaptive control of time with two thresholds L and U to indicate the status of server load in terms of response time difference as low,medium and high load by the load balancing application.Fetching the real time responses of entire servers in the server farm is a key component of this intelligent Load balancing system.Many Load Balancing schemes are based on the graded thresholds,because the exact information about the networkflux is difficult to obtain.Using two thresholds L and U,it is possible to indicate the load on particular server as low,medium or high depending on the Maximum response time difference of the servers present in the server farm which is below L,between L and U or above U respectively.However,the existing works of load balancing in the server farm incorporatefixed time to measure real time response time,which in general are not optimal for all traffic conditions.Therefore,an algorithm based on Propor-tional Integration and Derivative neural network controller was designed with two thresholds for tuning the timing to probe the server for near optimal perfor-mance.The emulation results has shown a significant gain in the performance by tuning the threshold time.In addition to that,tuning algorithm is implemented in conjunction with Load Balancing scheme which does not tune thefixed time slots.展开更多
For the characteristics of wind power generation system is multivariable, nonlinear and random, in this paper the neural network PID adaptive control is adopted. The size of pitch angle is adjusted in time to improve ...For the characteristics of wind power generation system is multivariable, nonlinear and random, in this paper the neural network PID adaptive control is adopted. The size of pitch angle is adjusted in time to improve the perfomance of power control. The PID parameters are corrected by the gradient descent method, and Radial Basis Functiion （RBF） neural network is used as the system identifier in this method. Sinlation results show that by using neural network adaptive PID controller the generator power control can inhibit effectively the speed and affect the output prover of generator. The dynamic performnce and robustness of the controlled system is good, and the peformance of wind power system is improved.展开更多
After a recursive multi-step-ahead predictor for nonlinear systems based on local recurrent neural networks is introduced, an intelligent FID controller is adopted to correct the errors including identified model erro...After a recursive multi-step-ahead predictor for nonlinear systems based on local recurrent neural networks is introduced, an intelligent FID controller is adopted to correct the errors including identified model errors and accumulated errors produced in the recursive process. Characterized by predictive control, this method can achieve a good control accuracy and has good robustness. A simulation study shows that this control algorithm is very effective.展开更多
The present paper studies the use of genetic algorithm to optimize the tuning of the Proportional, Integral and Derivative (PID) controller. Two control criteria were considered, the integral of the time multiplied by...The present paper studies the use of genetic algorithm to optimize the tuning of the Proportional, Integral and Derivative (PID) controller. Two control criteria were considered, the integral of the time multiplied by the absolute error (ITAE), and the integral of the time multiplied by the absolute output (ITAY). The time variant plant tested is a first-order plant with time delay. We aim at a real time implementation inside a digital board, so, the previous continuous approach was discretized and tested;the corresponding control algorithm is presented in this paper. The genetic algorithms and the PID controller are executed using the soft processor NIOS II in the Field Programmable Gate Array (FPGA). The computational results show the robustness and versatility of this technology.展开更多
Considerable research has been conducted on the control of pneumatic systems. However, nonlinearities continue to limit their performance. To compensate, advanced nonlinear and adaptive control strategies can be used....Considerable research has been conducted on the control of pneumatic systems. However, nonlinearities continue to limit their performance. To compensate, advanced nonlinear and adaptive control strategies can be used. But the more successful advanced strategies typically need a mathematical model of the system to be controlled. The advantage of neural networks is that they do not require a model. This paper reports on a study whose objective is to explore the potential of a novel adaptive on-line neural network compensator (ANNC) for the position control of a pneumatic gantry robot. It was found that by combining ANNC with a traditional PID controller, tracking performance could be improved on the order of 45% to 70%. This level of performance was achieved after careful tuning of both the ANNC and PID components. The paper sets out to document the ANNC algorithm, the adopted tuning procedure, and presents experimental results that illustrate the adaptive nature of NN and confirms the performance achievable with ANNC. A major contribution is demonstration that tuning of ANNC requires no more effort than the tuning of PID.展开更多
For complex systems with high nonlinearity and strong coupling,the decoupling control technology based on proportion integration differentiation(PID)neural network(PIDNN)is used to eliminate the coupling between loops...For complex systems with high nonlinearity and strong coupling,the decoupling control technology based on proportion integration differentiation(PID)neural network(PIDNN)is used to eliminate the coupling between loops.The connection weights of the PIDNN are easy to fall into local optimum due to the use of the gradient descent learning method.In order to solve this problem,a hybrid particle swarm optimization(PSO)and differential evolution(DE)algorithm(PSO-DE)is proposed for optimizing the connection weights of the PIDNN.The DE algorithm is employed as an acceleration operation to help the swarm to get out of local optima traps in case that the optimal result has not been improved after several iterations.Two multivariable controlled plants with strong coupling between input and output pairs are employed to demonstrate the effectiveness of the proposed method.Simulation results show t hat the proposed met hod has better decoupling capabilities and control quality than the previous approaches.展开更多
文摘In this study,artificial neural networks(ANNs)were implemented to determine design parameters for an impressed current cathodic protection(ICCP)prototype.An ASTM A36 steel plate was tested in 3.5%NaCl solution,seawater,and NS4 using electrochemical impedance spectroscopy(EIS)to monitor the evolution of the substrate surface,which affects the current required to reach the protection potential(Eprot).Experimental data were collected as training datasets and analyzed using statistical methods,including box plots and correlation matrices.Subsequently,ANNs were applied to predict the current demand at different exposure times,enabling the estimation of electrochemical parameters(limiting voltage values)that can be used to optimize a self-regulating ICCP system.The obtained electrochemical parameters were then used,through Particle Swarm Optimization(PSO),to fine-tune an ANN-based proportional-integral-derivative(PID)controller for the ICCP system.
文摘Core power is a key parameter of nuclear reactor.Traditionally,the proportional-integralderivative(PID)controllers are used to control the core power.Fractional-order PID(FOPID)controller represents the cutting edge in core power control research.In comparing with the integer-order models,fractional-order models describe the variation of core power more accurately,thus provide a comprehensive and realistic depiction for the power and state changes of reactor core.However,current fractional-order controllers cannot adjust their parameters dynamically to response the environmental changes or demands.In this paper,we aim at the stable control and dynamic responsiveness of core power.Based on the strong selflearning ability of artificial neural network(ANN),we propose a composite controller combining the ANN and FOPID controller.The FOPID controller is firstly designed and a back propagation neural network(BPNN)is then utilized to optimize the parameters of FOPID.It is shown by simulation that the composite controller enables the real-time parameter tuning via ANN and retains the advantage of FOPID controller.
基金supported by the project of "SDUST Qunxing Program"(No.qx0902075)
文摘By combining the Back-Propagation （BP） neural network with conventional proportional Integral Derivative （PID） controller, a new temperature control strategy of the export steam in supercritical electric power plant is put forward. This scheme can effectively overcome the large time delay, inertia of the export steam and the influencee of object in varying operational parameters. Thus excellent control quality is obtaitud. The present paper describes the development and application of neural network based controller to control the temperature of the boiler＇s export steam. Through simulation in various situations, it validates that the control quality of this control system is apparently superior to the conventional PID control system.
文摘Guided by the principle of neural network,an intelligent PID controller based on neural network is devised and applied to control of constant temperature and constant liquidlevel system.The experiment results show that this controller has high accuracy and strong robustness and good characters.
基金This paper is supported by the National Foundamental Research Program of China (No. 2002CB312201), the State Key Program of NationalNatural Science of China (No. 60534010), the Funds for Creative Research Groups of China (No. 60521003), and Program for Changjiang Scholarsand Innovative Research Team in University (No. IRT0421).
文摘For a class of complex industrial processes with strong nonlinearity, serious coupling and uncertainty, a nonlinear decoupling proportional-integral-differential （PID） controller is proposed, which consists of a traditional PID controller, a decoupling compensator and a feedforward compensator for the unmodeled dynamics. The parameters of such controller is selected based on the generalized minimum variance control law. The unmodeled dynamics is estimated and compensated by neural networks, a switching mechanism is introduced to improve tracking performance, then a nonlinear decoupling PID control algorithm is proposed. All signals in such switching system are globally bounded and the tracking error is convergent. Simulations show effectiveness of the algorithm.
基金supported by the National Key Research and Development Program of China(No.2023YFF0715103)-financial supportNational Natural Science Foundation of China(Grant Nos.62306237 and 62006191)-financial support+1 种基金Key Research and Development Program of Shaanxi(Nos.2024GX-YBXM-149 and 2021ZDLGY15-04)-financial support,NorthwestUniversity Graduate Innovation Project(No.CX2023194)-financial supportNatural Science Foundation of Shaanxi(No.2023-JC-QN-0750)-financial support.
文摘Over 1.3 million people die annually in traffic accidents,and this tragic fact highlights the urgent need to enhance the intelligence of traffic safety and control systems.In modern industrial and technological applications and collaborative edge intelligence,control systems are crucial for ensuring efficiency and safety.However,deficiencies in these systems can lead to significant operational risks.This paper uses edge intelligence to address the challenges of achieving target speeds and improving efficiency in vehicle control,particularly the limitations of traditional Proportional-Integral-Derivative(PID)controllers inmanaging nonlinear and time-varying dynamics,such as varying road conditions and vehicle behavior,which often result in substantial discrepancies between desired and actual speeds,as well as inefficiencies due to manual parameter adjustments.The paper uses edge intelligence to propose a novel PID control algorithm that integrates Backpropagation(BP)neural networks to enhance robustness and adaptability.The BP neural network is first trained to capture the nonlinear dynamic characteristics of the vehicle.Thetrained network is then combined with the PID controller to forma hybrid control strategy.The output layer of the neural network directly adjusts the PIDparameters(k_(p),k_(i),k_(d)),optimizing performance for specific driving scenarios through self-learning and weight adjustments.Simulation experiments demonstrate that our BP neural network-based PID design significantly outperforms traditional methods,with the response time for acceleration from 0 to 1 m/s improved from 0.25 s to just 0.065 s.Furthermore,real-world tests on an intelligent vehicle show its ability to make timely adjustments in response to complex road conditions,ensuring consistent speed maintenance and enhancing overall system performance.
基金Item Sponsored by National High-Tech Research and Development Program(863Program)of China(2009AA04Z143)Natural Science Foundation of Hebei Province of China(E2006001038)Hebei Provincial Science and Technology Project of China(10212101D)
文摘The hydraulic roll bending control system usually has the dynamic characteristics of nonlinearity, slow time variance and strong outside interference in the roiling process, so it is difficult to establish a precise mathemati- cal model for control. So, a new method for establishing a hydraulic roll bending control system is put forward by cerebellar model articulation controller （CMAC） neural network and proportional-integral-derivative （PID） coupling control strategy. The non-linear relationship between input and output can be achieved by the concept mapping and the actual mapping of CMAC. The simulation results show that, compared with the conventional PID control algo- rithm, the parallel control algorithm can overcome the influence of parameter change of roll bending system on the control performance, thus improve the anti jamming capability of the system greatly, reduce the dependence of con- trol performance on the accuracy of the analytical model, enhance the tracking performance of hydraulic roll bending loop for the hydraulic and roll bending force and increase system response speed. The results indicate that the CMAC-P1D coupling control strategy for hydraulic roll bending system is effective.
基金supported by the National Natural Science Foundation of China(Grant Nos.12372064 and 12172291)the Youth and Middle-Aged Science and Technology Development Program of Shanghai Institute of Technology(Grant No.ZQ2024-10)。
文摘Conventional open-loop deep brain stimulation(DBS)systems with fixed parameters fail to accommodate interindividual pathological differences in Parkinson's disease(PD)management while potentially inducing adverse effects and causing excessive energy consumption.In this paper,we present an adaptive closed-loop framework integrating a Yogi-optimized proportional–integral–derivative neural network(Yogi-PIDNN)controller.The Yogi-augmented gradient adaptation mechanism accelerates the convergence of general PIDNN controllers in high-dimensional nonlinear control systems while reducing control energy usage.In addition,a system identification method establishes input–output dynamics for pre-training stimulation waveforms,bypassing real-time parameter-tuning constraints and thereby enhancing closed-loop adaptability.Finally,a theoretical analysis based on Lyapunov stability criteria establishes a sufficient condition for closed-loop stability within the identified model.Computational validations demonstrate that our approach restores thalamic relay reliability while reducing energy consumption by(81.0±0.7)%across multi-frequency tests.This study advances adaptive neuromodulation by synergizing data-driven pre-training with stability-guaranteed real-time control,offering a novel framework for energy-efficient and personalized Parkinson's therapy.
基金Supported by the National Natural Science Foundation of China(51305457)。
文摘To speedily regulate and precisely control a hydraulic power system in a unmanned walking platform(UWP),based on the brief analysis of digital PID and its shortcomings,dual control parameters in a hydraulic power system are given for the precision requirement,and a control strategy for dual relative control parameters in the dual loop PID is put forward,a load and throttle rotation-speed response model for variable pump and gasoline engine is provided according to a physical process,a simplified neural network structure PID is introduced,and formed mixed neural network PID(MNN PID)to control rotation speed of engine and pressure of variable pump,calculation using the back propagation(BP)algorithm and a self-adapted learning step is made,including a mathematic principle and a calculation flow scheme,the BP algorithm of neural network PID is trained and the control effect of system is simulated in Matlab environment,real control effects of engine rotation speed and variable pump pressure are verified in the experimental bench.Results show that algorithm effect of MNN PID is stable and MNN PID can meet the adjusting requirement of control parameters.
文摘A back propagation （BP） neural network mathematical model was established to investigate the maneuvering control of an air cushion vehicle （ACV）. The calculation was based on four-freedom-degree model experiments of hydrodynamics and aerodynamics. It is necessary for the ACV to control the velocity and the yaw rate as well as the velocity angle at the same time. The yaw rate and the velocity angle must be controlled correspondingly because of the whipping, which is a special characteristic for the ACV. The calculation results show that it is an efficient way for the ACV＇s maneuvering control by using a BP neural network to adjust PID parameters online.
基金National Nature Science Foundation of China (No.50575074)
文摘A controller based on a PID neural network （PIDNN） is proposed for an arc welding power source whose output characteristic in responding to a given value is quickly and intelligently controlled in the welding process. The new method syncretizes the PID control strategy and neural network to control the welding process intelligently, so it has the merit of PID control rules and the trait of better information disposal ability of the neural network. The results of simulation show that the controller has the properties of quick response, low overshoot, quick convergence and good stable accuracy, which meet the requirements for control of the welding process.
基金This work was supported by the youth backbone teachers training program of Henan colleges and universities under Grant No.2016ggjs-287the project of science and technology of Henan province under Grant No.172102210124the Key Scientific Research projects in Colleges and Universities in Henan(Grant No.18B460003).
文摘The heating technological requirement of the conventional PID control is difficult to guarantee which based on the precise mathematical model,because the heating furnace for heating treatment with the big inertia,the pure time delay and nonlinear time-varying.Proposed one kind optimized variable method of PID controller based on the genetic algorithm with improved BP network that better realized the completely automatic intelligent control of the entire thermal process than the classics critical purporting(Z-N)method.A heating furnace for the object was simulated with MATLAB,simulation results show that the control system has the quicker response characteristic,the better dynamic characteristic and the quite stronger robustness,which has some promotional value for the control of industrial furnace.
基金Project supported bY the National Natural Science Foundation of China （Grant No.50375085）, and the Natural Science Foundation of Shandong Province （Grant No.Y2002F13）
文摘A closed-chain robot has several advantages over an open-chain robot, such as high mechanical rigidity, high payload, high precision. Accurate trajectory control of a robot is essential in practical-use. This paper presents an adaptive proportional integral differential （PID） control algorithm based on radial basis function （RBF） neural network for trajectory tracking of a two-degree-of-freedom （2-DOF） closed-chain robot. In this scheme, an RBF neural network is used to approximate the unknown nonlinear dynamics of the robot, at the same time, the PID parameters can be adjusted online and the high precision can be obtained. Simulation results show that the control algorithm accurately tracks a 2-DOF closed-chain robot trajectories. The results also indicate that the system robustness and tracking performance are superior to the classic PID method.
文摘In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.
文摘Web service applications are increasing tremendously in support of high-level businesses.There must be a need of better server load balancing mechanism for improving the performance of web services in business.Though many load balancing methods exist,there is still a need for sophisticated load bal-ancing mechanism for not letting the clients to get frustrated.In this work,the ser-ver with minimum response time and the server having less traffic volume were selected for the aimed server to process the forthcoming requests.The Servers are probed with adaptive control of time with two thresholds L and U to indicate the status of server load in terms of response time difference as low,medium and high load by the load balancing application.Fetching the real time responses of entire servers in the server farm is a key component of this intelligent Load balancing system.Many Load Balancing schemes are based on the graded thresholds,because the exact information about the networkflux is difficult to obtain.Using two thresholds L and U,it is possible to indicate the load on particular server as low,medium or high depending on the Maximum response time difference of the servers present in the server farm which is below L,between L and U or above U respectively.However,the existing works of load balancing in the server farm incorporatefixed time to measure real time response time,which in general are not optimal for all traffic conditions.Therefore,an algorithm based on Propor-tional Integration and Derivative neural network controller was designed with two thresholds for tuning the timing to probe the server for near optimal perfor-mance.The emulation results has shown a significant gain in the performance by tuning the threshold time.In addition to that,tuning algorithm is implemented in conjunction with Load Balancing scheme which does not tune thefixed time slots.
基金supported by the Science and Technology Major Special Projects Gansu(No.0801GKDA058)
文摘For the characteristics of wind power generation system is multivariable, nonlinear and random, in this paper the neural network PID adaptive control is adopted. The size of pitch angle is adjusted in time to improve the perfomance of power control. The PID parameters are corrected by the gradient descent method, and Radial Basis Functiion （RBF） neural network is used as the system identifier in this method. Sinlation results show that by using neural network adaptive PID controller the generator power control can inhibit effectively the speed and affect the output prover of generator. The dynamic performnce and robustness of the controlled system is good, and the peformance of wind power system is improved.
基金This project was supported by the National Natural Science Foundation of China(60174021)Natural Science Foundation Key Project of Tianjin(013800711).
文摘After a recursive multi-step-ahead predictor for nonlinear systems based on local recurrent neural networks is introduced, an intelligent FID controller is adopted to correct the errors including identified model errors and accumulated errors produced in the recursive process. Characterized by predictive control, this method can achieve a good control accuracy and has good robustness. A simulation study shows that this control algorithm is very effective.
文摘The present paper studies the use of genetic algorithm to optimize the tuning of the Proportional, Integral and Derivative (PID) controller. Two control criteria were considered, the integral of the time multiplied by the absolute error (ITAE), and the integral of the time multiplied by the absolute output (ITAY). The time variant plant tested is a first-order plant with time delay. We aim at a real time implementation inside a digital board, so, the previous continuous approach was discretized and tested;the corresponding control algorithm is presented in this paper. The genetic algorithms and the PID controller are executed using the soft processor NIOS II in the Field Programmable Gate Array (FPGA). The computational results show the robustness and versatility of this technology.
文摘Considerable research has been conducted on the control of pneumatic systems. However, nonlinearities continue to limit their performance. To compensate, advanced nonlinear and adaptive control strategies can be used. But the more successful advanced strategies typically need a mathematical model of the system to be controlled. The advantage of neural networks is that they do not require a model. This paper reports on a study whose objective is to explore the potential of a novel adaptive on-line neural network compensator (ANNC) for the position control of a pneumatic gantry robot. It was found that by combining ANNC with a traditional PID controller, tracking performance could be improved on the order of 45% to 70%. This level of performance was achieved after careful tuning of both the ANNC and PID components. The paper sets out to document the ANNC algorithm, the adopted tuning procedure, and presents experimental results that illustrate the adaptive nature of NN and confirms the performance achievable with ANNC. A major contribution is demonstration that tuning of ANNC requires no more effort than the tuning of PID.
基金This work was supported by the Key Project of Chinese Ministry of Education(No.212135)the Guangxi Natural Science Foundation(No.2012GXNSFBA053165)+1 种基金the Projec t of Education Department of Guangxi(No.201203YB131)the Project of Guangxi Key Laboratory(No.14-045-44)。
文摘For complex systems with high nonlinearity and strong coupling,the decoupling control technology based on proportion integration differentiation(PID)neural network(PIDNN)is used to eliminate the coupling between loops.The connection weights of the PIDNN are easy to fall into local optimum due to the use of the gradient descent learning method.In order to solve this problem,a hybrid particle swarm optimization(PSO)and differential evolution(DE)algorithm(PSO-DE)is proposed for optimizing the connection weights of the PIDNN.The DE algorithm is employed as an acceleration operation to help the swarm to get out of local optima traps in case that the optimal result has not been improved after several iterations.Two multivariable controlled plants with strong coupling between input and output pairs are employed to demonstrate the effectiveness of the proposed method.Simulation results show t hat the proposed met hod has better decoupling capabilities and control quality than the previous approaches.
