The negative-sequence voltage is often caused by the asymmetrical fault in the AC system,as well as the harmonics after the symmetrical fault at the AC side of inverter in line commutated converter based high-voltage ...The negative-sequence voltage is often caused by the asymmetrical fault in the AC system,as well as the harmonics after the symmetrical fault at the AC side of inverter in line commutated converter based high-voltage DC(LCC-HVDC).The negative-sequence voltage affects the phase-locked loop(PLL)and the inverter control,thus the inverter is vulnerable to the subsequent commutation failure(SCF).In this paper,the analytical expression of the negative-sequence voltage resulting from the symmetrical fault with the commutation voltage is derived using the switching function and Fourier decomposition.The analytical expressions of the outputs of the PLL and inverter control with respect to time are derived to quantify the contribution of the negative-sequence voltage to the SCF.To deal with the AC component of the input signals in the PLL and the inverter control due to the negative-sequence voltage,the existing proportional-integral controls of the PLL,constant current control,and constant extinction angle control are replaced by the linear active disturbance rejection control against the SCF.Simulation results verify the contributing factors to the SCF.The proposed control reduces the risk of SCF and improves the recovery speed of the system under different fault conditions.展开更多
Power electronic interface of dispersed generation plays a very important role in connecting a dispersed generation with utility grids. A power electronic interface not only adjusts the amount of active and reactive p...Power electronic interface of dispersed generation plays a very important role in connecting a dispersed generation with utility grids. A power electronic interface not only adjusts the amount of active and reactive power injecting into a grid but also implements other importance duties as well. In this study, negative-sequence current injection has been fulfilled in three-phase power electronic interface for two important duties besides injecting reference power into utility grids. The first one is for islanding detection, and the other one is to enhance unbalance-fault ride-through capability of dispersed generation. This paper introduces a mechanism of negative-sequence injection based on controlling two separate coordinates of dq-control and explains the effect of negative-sequence injection in limiting the unbalanced currents generated from a dispersed generation. Using adaptive notch filter as a signal processing unit for the three-phase system, negative-sequence components are observed. The performance of entire control system is evaluated by time domain simulations, PSCAD/EMTDC （power systems computer aided design/electromagnetic transients including DC）.展开更多
In this paper,a dynamic equivalent method applicable to the direct-drive permanent magnet synchronous generator(PMSG)based wind farms under asymmetrical faults is proposed.Firstly,PMSGs are clustered based on their di...In this paper,a dynamic equivalent method applicable to the direct-drive permanent magnet synchronous generator(PMSG)based wind farms under asymmetrical faults is proposed.Firstly,PMSGs are clustered based on their different active power characteristics under asymmetrical faults.Further,single-machine equivalent models(SMEMs)are constructed for different clusters of PMSGs.In particular,an SMEM with multi-segmented slope recovery is introduced for PMSGs with ramp recovery characteristics.Further,a collector network equivalent method for wind farms applicable to both symmetrical and asymmetrical faults is presented.Moreover,an iterative simulation method is used to gain the required clustering indicators before the fault actually occurs.Eventually,the effectiveness of the proposed dynamic equivalent method is verified on a modified IEEE 39-bus system.展开更多
This paper presents a controller model of asymmetric current injection for converter-interfaced generators suitable for root-mean-square(RMS)phasor-domain,fundamentalfrequency,three-phase,and dynamic simulation tools....This paper presents a controller model of asymmetric current injection for converter-interfaced generators suitable for root-mean-square(RMS)phasor-domain,fundamentalfrequency,three-phase,and dynamic simulation tools.The effectiveness of the proposed controller is assessed with simulations in test systems with high percentage of converter-interfaced generation.The simulations focus on the operation of protection relays that use negative-sequence quantities in their directional elements.This paper also presents and compares two strategies to limit reactive negative-sequence currents,and active and reactive positive-sequence currents.A tutorial test system and a regional system part of the actual Brazilian Interconnected Power System are used to assess the correctness of the proposed controller in three-phase fundamental-frequency RMS dynamic simulations.展开更多
To explore the clustered voltage balancing mechanism of the cascaded H-bridge static synchronous compensator(STATCOM),this paper analyzes the causes of unbalanced clustered voltage.The negative-sequence current caused...To explore the clustered voltage balancing mechanism of the cascaded H-bridge static synchronous compensator(STATCOM),this paper analyzes the causes of unbalanced clustered voltage.The negative-sequence current caused by the compensation of unbalanced reactive power or detection and control errors and the zero-sequence voltage caused by voltage drift of the STATCOM neutral point contribute to unbalanced clustered voltage.On this basis,this paper proposes a control strategy to inject negative-sequence current and zero-sequence voltage simultaneously.The injection of negative-sequence current may cause current asymmetry in the grid,and the zerosequence injection has a relatively limited balancing ability in the clustered voltages.The proposed control strategy can not only generate a faster balancing response than the traditional zero-sequence voltage injection method,but also lower the extent of current asymmetry compared with the traditional negative-sequence current injection method.Then,the negative-sequence current and zero-sequence voltage injection are further transformed into the dq frame to establish a unified frame.The effectiveness of the proposed control strategy is verified by the simulation and experimental results.展开更多
基金supported by National Natural Science Foundation of China(No.51877061).
文摘The negative-sequence voltage is often caused by the asymmetrical fault in the AC system,as well as the harmonics after the symmetrical fault at the AC side of inverter in line commutated converter based high-voltage DC(LCC-HVDC).The negative-sequence voltage affects the phase-locked loop(PLL)and the inverter control,thus the inverter is vulnerable to the subsequent commutation failure(SCF).In this paper,the analytical expression of the negative-sequence voltage resulting from the symmetrical fault with the commutation voltage is derived using the switching function and Fourier decomposition.The analytical expressions of the outputs of the PLL and inverter control with respect to time are derived to quantify the contribution of the negative-sequence voltage to the SCF.To deal with the AC component of the input signals in the PLL and the inverter control due to the negative-sequence voltage,the existing proportional-integral controls of the PLL,constant current control,and constant extinction angle control are replaced by the linear active disturbance rejection control against the SCF.Simulation results verify the contributing factors to the SCF.The proposed control reduces the risk of SCF and improves the recovery speed of the system under different fault conditions.
文摘Power electronic interface of dispersed generation plays a very important role in connecting a dispersed generation with utility grids. A power electronic interface not only adjusts the amount of active and reactive power injecting into a grid but also implements other importance duties as well. In this study, negative-sequence current injection has been fulfilled in three-phase power electronic interface for two important duties besides injecting reference power into utility grids. The first one is for islanding detection, and the other one is to enhance unbalance-fault ride-through capability of dispersed generation. This paper introduces a mechanism of negative-sequence injection based on controlling two separate coordinates of dq-control and explains the effect of negative-sequence injection in limiting the unbalanced currents generated from a dispersed generation. Using adaptive notch filter as a signal processing unit for the three-phase system, negative-sequence components are observed. The performance of entire control system is evaluated by time domain simulations, PSCAD/EMTDC （power systems computer aided design/electromagnetic transients including DC）.
基金supported by the National Natural Science Foundation of China(No.U2166601).
文摘In this paper,a dynamic equivalent method applicable to the direct-drive permanent magnet synchronous generator(PMSG)based wind farms under asymmetrical faults is proposed.Firstly,PMSGs are clustered based on their different active power characteristics under asymmetrical faults.Further,single-machine equivalent models(SMEMs)are constructed for different clusters of PMSGs.In particular,an SMEM with multi-segmented slope recovery is introduced for PMSGs with ramp recovery characteristics.Further,a collector network equivalent method for wind farms applicable to both symmetrical and asymmetrical faults is presented.Moreover,an iterative simulation method is used to gain the required clustering indicators before the fault actually occurs.Eventually,the effectiveness of the proposed dynamic equivalent method is verified on a modified IEEE 39-bus system.
基金supported by CNPQ,FAPERJ and Coordenacao de Aperfeicoamento de Pessoal de Nível Superior–Brasil(CAPES)Finance Code 001。
文摘This paper presents a controller model of asymmetric current injection for converter-interfaced generators suitable for root-mean-square(RMS)phasor-domain,fundamentalfrequency,three-phase,and dynamic simulation tools.The effectiveness of the proposed controller is assessed with simulations in test systems with high percentage of converter-interfaced generation.The simulations focus on the operation of protection relays that use negative-sequence quantities in their directional elements.This paper also presents and compares two strategies to limit reactive negative-sequence currents,and active and reactive positive-sequence currents.A tutorial test system and a regional system part of the actual Brazilian Interconnected Power System are used to assess the correctness of the proposed controller in three-phase fundamental-frequency RMS dynamic simulations.
文摘To explore the clustered voltage balancing mechanism of the cascaded H-bridge static synchronous compensator(STATCOM),this paper analyzes the causes of unbalanced clustered voltage.The negative-sequence current caused by the compensation of unbalanced reactive power or detection and control errors and the zero-sequence voltage caused by voltage drift of the STATCOM neutral point contribute to unbalanced clustered voltage.On this basis,this paper proposes a control strategy to inject negative-sequence current and zero-sequence voltage simultaneously.The injection of negative-sequence current may cause current asymmetry in the grid,and the zerosequence injection has a relatively limited balancing ability in the clustered voltages.The proposed control strategy can not only generate a faster balancing response than the traditional zero-sequence voltage injection method,but also lower the extent of current asymmetry compared with the traditional negative-sequence current injection method.Then,the negative-sequence current and zero-sequence voltage injection are further transformed into the dq frame to establish a unified frame.The effectiveness of the proposed control strategy is verified by the simulation and experimental results.
