Many sub-products of pulsed discharge,such as ultraviolet light,strong electric fields,shock waves and active species,are effective in treating wastewater.To improve the efficiency of the discharge plasma technology i...Many sub-products of pulsed discharge,such as ultraviolet light,strong electric fields,shock waves and active species,are effective in treating wastewater.To improve the efficiency of the discharge plasma technology in removing pollutants,adding TiO2 photo-catalyst to pulsed discharges could help.A negative-pulsed-discharge system,which has nozzle discharge electrodes with or without TiO2 coating,is used to degrade azo dye Acid OrangeⅡ,and the effects of several key conditions(maximum pulse voltage,pulse repetition frequency,initial mass concentration of Acid OrangeⅡinitial solution pH,treatment duration,the phase of discharge,and the existence of TiO2)on the degradation are experimentally investigated.The degradation of Acid OrangeⅡincreases with maximum pulse voltage,pulse repetition frequency,and treatment duration,and it is larger when putting the discharge electrode on the solution surface than in air or inside the solution,i.e.the discharge in gas phase is more effective than that in gas-liquid phase or liquid phase.The degradation decreases as the initial mass concentration of the solution increases.It also relates to pH and is higher at acidic conditions than at neutral or alkaline conditions.Compared to treatments without TiO2,the ones using the nozzle discharge electrode with TiO2 coated increase the degradation of Acid OrangeⅡby 5%.It is concluded that the proposed system with TiO2 added in can remove Acid OrangeⅡfrom wastewater effectively.展开更多
The plasma characteristics of a gas-liquid phase discharge reactor were investigated by optical and electrical methods.The nozzle-cylinder electrode in the discharge reactor was supplied witha negative nanosecond puls...The plasma characteristics of a gas-liquid phase discharge reactor were investigated by optical and electrical methods.The nozzle-cylinder electrode in the discharge reactor was supplied witha negative nanosecond pulsed generator.The optical emission spectrum diagnosis revealed that OH（A2∑＋ → X2Π,306–309 nm）,N32（CΠ→B3Πg,337 nm）,O（3p5p→3s-5s-0,777.2 nm）and O（3p3p→3s3s0,844.6 nm）were produced in the discharge plasma channels.The electron temperature（Te）was calculated from the emission relative intensity ratio between the atomic O 777.2 nm and 844.6 nm,and it increased with the applied voltage and the pulsed frequency and fell within the range of 0.5–0.8 e V.The gas temperature（Tg）that was measured by Lifbase was in a range from 400 K to 600 K.展开更多
A specially designed fluid damper used as negative shock pulse generator in the shock resistance test system to dissipate the shock input energy in transient time duration is presented. The theoretical modeling based ...A specially designed fluid damper used as negative shock pulse generator in the shock resistance test system to dissipate the shock input energy in transient time duration is presented. The theoretical modeling based on the three-dimensional equation of heat transfer through a fluid element is created to predict the viscous heating in the fluid damper under shock conditions. A comprehensive experimental program that investigates the problem of viscous heating in the fluid damper under different shock conditions is conducted on the shock test machine to validate the analytical expression. Temperature histories for the fluid within the damper at two locations, the annular-oriflce and the-end-of stroke of the damper, are recorded. The experimental results show that the theoretical model can offer a very dependable prediction for the temperature histories in the damper for increasing input velocity. The theoretical model and experimental data both clearly indicate that the viscous heating in the damper is directly related to the maximum shock velocity input and the pressure between the two sides of the piston head.展开更多
A high fidelity dynamic model of a high-energy hydraulically-actuated shock test machine for heavy weight devices is presented to satisfy the newly-built shock resistance standard and simulate the actual underwater ex...A high fidelity dynamic model of a high-energy hydraulically-actuated shock test machine for heavy weight devices is presented to satisfy the newly-built shock resistance standard and simulate the actual underwater explosion environments in laboratory as well as increase the testing capability of shock test machine. In order to produce the required negative shock pulse in the given time duration, four hydraulic actuators are utilized. The model is then used to formulate an advanced feedforward controller for the system to produce the required negative waveform and to address the motion synchronization of the four cylinders. The model provides a safe and easily controllable way to perform a ＂virtual testing＂ before starting potentially destructive tests on specimen and to predict performance of the system. Simulation results have demonstrated the effectiveness of the controller.展开更多
基金Project supported by National Natural Science Foundation of China(51207089)Shang-hai Maritime University(20120097).
文摘Many sub-products of pulsed discharge,such as ultraviolet light,strong electric fields,shock waves and active species,are effective in treating wastewater.To improve the efficiency of the discharge plasma technology in removing pollutants,adding TiO2 photo-catalyst to pulsed discharges could help.A negative-pulsed-discharge system,which has nozzle discharge electrodes with or without TiO2 coating,is used to degrade azo dye Acid OrangeⅡ,and the effects of several key conditions(maximum pulse voltage,pulse repetition frequency,initial mass concentration of Acid OrangeⅡinitial solution pH,treatment duration,the phase of discharge,and the existence of TiO2)on the degradation are experimentally investigated.The degradation of Acid OrangeⅡincreases with maximum pulse voltage,pulse repetition frequency,and treatment duration,and it is larger when putting the discharge electrode on the solution surface than in air or inside the solution,i.e.the discharge in gas phase is more effective than that in gas-liquid phase or liquid phase.The degradation decreases as the initial mass concentration of the solution increases.It also relates to pH and is higher at acidic conditions than at neutral or alkaline conditions.Compared to treatments without TiO2,the ones using the nozzle discharge electrode with TiO2 coated increase the degradation of Acid OrangeⅡby 5%.It is concluded that the proposed system with TiO2 added in can remove Acid OrangeⅡfrom wastewater effectively.
基金supported by National Natural Science Foundation of China(Grant No.51207089)
文摘The plasma characteristics of a gas-liquid phase discharge reactor were investigated by optical and electrical methods.The nozzle-cylinder electrode in the discharge reactor was supplied witha negative nanosecond pulsed generator.The optical emission spectrum diagnosis revealed that OH（A2∑＋ → X2Π,306–309 nm）,N32（CΠ→B3Πg,337 nm）,O（3p5p→3s-5s-0,777.2 nm）and O（3p3p→3s3s0,844.6 nm）were produced in the discharge plasma channels.The electron temperature（Te）was calculated from the emission relative intensity ratio between the atomic O 777.2 nm and 844.6 nm,and it increased with the applied voltage and the pulsed frequency and fell within the range of 0.5–0.8 e V.The gas temperature（Tg）that was measured by Lifbase was in a range from 400 K to 600 K.
基金Chinese Navy Warship Research Center(No.05131-1046)
文摘A specially designed fluid damper used as negative shock pulse generator in the shock resistance test system to dissipate the shock input energy in transient time duration is presented. The theoretical modeling based on the three-dimensional equation of heat transfer through a fluid element is created to predict the viscous heating in the fluid damper under shock conditions. A comprehensive experimental program that investigates the problem of viscous heating in the fluid damper under different shock conditions is conducted on the shock test machine to validate the analytical expression. Temperature histories for the fluid within the damper at two locations, the annular-oriflce and the-end-of stroke of the damper, are recorded. The experimental results show that the theoretical model can offer a very dependable prediction for the temperature histories in the damper for increasing input velocity. The theoretical model and experimental data both clearly indicate that the viscous heating in the damper is directly related to the maximum shock velocity input and the pressure between the two sides of the piston head.
文摘A high fidelity dynamic model of a high-energy hydraulically-actuated shock test machine for heavy weight devices is presented to satisfy the newly-built shock resistance standard and simulate the actual underwater explosion environments in laboratory as well as increase the testing capability of shock test machine. In order to produce the required negative shock pulse in the given time duration, four hydraulic actuators are utilized. The model is then used to formulate an advanced feedforward controller for the system to produce the required negative waveform and to address the motion synchronization of the four cylinders. The model provides a safe and easily controllable way to perform a ＂virtual testing＂ before starting potentially destructive tests on specimen and to predict performance of the system. Simulation results have demonstrated the effectiveness of the controller.
