Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow...Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow field in slab continuous casting(CC)molds with narrow widths for the production of automobile exposed panels.Reasonable agreement between the calculated results and measured subsurface velocities of liquid steel was obtained under different operating parameters of the CC process.The simulation results reveal that the flow field in the horizontal plane located 50 mm from the meniscus can be used as the characteristic flow field to optimize the flow field of molten steel in the mold.Increases in casting speed can increase the subsurface velocity of molten steel and shift the position of the vortex core downward in the downward circulation zone.The flow field of liquid steel in a 1040 mm-wide slab CC mold can be improved by an Ar gas flow rate of 7 L·min^−1 and casting speed of 1.7 m·min^−1.Under the present experimental conditions,the double-roll flow pattern is generally stable at a submerged entry nozzle immersion depth of 170 mm.展开更多
This paper investigates the absorptive reduction and the width narrowing of electromagnetically induced transparency （EIT） in a thin vapour film of A-type atoms confined between two dielectric walls whose thickness ...This paper investigates the absorptive reduction and the width narrowing of electromagnetically induced transparency （EIT） in a thin vapour film of A-type atoms confined between two dielectric walls whose thickness is comparable with the wavelength of the probe field. The absorptive lines of the weak probe field exhibit strong reductions and very narrow EIT dips, which mainly results from the velocity slow-down effects and transient behaviour of atoms in a confined system. It is also shown that the lines are modified by the strength of the coupling field and the ratio of L/λ, with L the film thickness and λthe wavelength of the probe field. A simple robust recipe for EIT in a thin medium is achievable in experiment.展开更多
Facile and efficient method for constructing carbon dots(CDs)with narrow full width at half maximum(FWHM)is a major challenge in the field,and researches on regulating the FWHM of CDs are also rare and scarce.In this ...Facile and efficient method for constructing carbon dots(CDs)with narrow full width at half maximum(FWHM)is a major challenge in the field,and researches on regulating the FWHM of CDs are also rare and scarce.In this work,we delved into the synthesis of CDs with narrow fluorescence emission FWHM(NFEF-CDs)in the m-phenylenediamine(m-PD)/ethanol system,utilizing solid superacid resin as cata-lyst with solvothermal method.The resulting NFEF-CDs exhibit a photoluminescent(PL)emission peak at 521 nm with a narrow FWHM of 41 nm,an absolute PL quantum yield(QY)of 80%,and display excitation-independent PL behavior.Through comprehensive characterization,we identified the protonation of edge amino on NFEF-CDs as the key factor in achieving the narrow FWHM.Subsequently,we validated the broad applicability of solid superacid resins as catalysts for synthesizing CDs with narrow FWHM in the m-PD/ethanol system.Finally,we utilized a self-leveling method to prepare NFEF-CDs film on the surface of poly(methyl methacrylate)(PMMA)substrate and investigated the solid-state fluorescence properties of NFEF-CDs as well as their performance as luminescence solar concentrator(LSC)for photovoltaic conver-sion.The results revealed that the as-prepared LSC exhibit an internal quantum efficiency(η_(int))of 42.39%and an optical efficiency(η_(opt))of 0.68%.These findings demonstrate the promising prospects of NFEF-CDs in the field of LSCs and provide a theoretical basis for their application in photovoltaic conversion.展开更多
基金This work was financially supported by the Hunan Valin Lianyuan Iron&Steel Co.,Ltd.,China(No.18H00582).The authors are grateful to Hunan Valin Lianyuan Iron&Steel Co.,Ltd.,China for their assistance with the industrial measurement of velocities near the mold surface.
文摘Computational simulations and high-temperature measurements of velocities near the surface of a mold were carried out by using the rod deflection method to study the effects of various operating parameters on the flow field in slab continuous casting(CC)molds with narrow widths for the production of automobile exposed panels.Reasonable agreement between the calculated results and measured subsurface velocities of liquid steel was obtained under different operating parameters of the CC process.The simulation results reveal that the flow field in the horizontal plane located 50 mm from the meniscus can be used as the characteristic flow field to optimize the flow field of molten steel in the mold.Increases in casting speed can increase the subsurface velocity of molten steel and shift the position of the vortex core downward in the downward circulation zone.The flow field of liquid steel in a 1040 mm-wide slab CC mold can be improved by an Ar gas flow rate of 7 L·min^−1 and casting speed of 1.7 m·min^−1.Under the present experimental conditions,the double-roll flow pattern is generally stable at a submerged entry nozzle immersion depth of 170 mm.
文摘This paper investigates the absorptive reduction and the width narrowing of electromagnetically induced transparency （EIT） in a thin vapour film of A-type atoms confined between two dielectric walls whose thickness is comparable with the wavelength of the probe field. The absorptive lines of the weak probe field exhibit strong reductions and very narrow EIT dips, which mainly results from the velocity slow-down effects and transient behaviour of atoms in a confined system. It is also shown that the lines are modified by the strength of the coupling field and the ratio of L/λ, with L the film thickness and λthe wavelength of the probe field. A simple robust recipe for EIT in a thin medium is achievable in experiment.
基金supported by the National Natural Science Foundation of China(No.22308161)the Jiangsu Funding Program for Excellent Postdoctoral Talent(No.2022ZB369),Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Facile and efficient method for constructing carbon dots(CDs)with narrow full width at half maximum(FWHM)is a major challenge in the field,and researches on regulating the FWHM of CDs are also rare and scarce.In this work,we delved into the synthesis of CDs with narrow fluorescence emission FWHM(NFEF-CDs)in the m-phenylenediamine(m-PD)/ethanol system,utilizing solid superacid resin as cata-lyst with solvothermal method.The resulting NFEF-CDs exhibit a photoluminescent(PL)emission peak at 521 nm with a narrow FWHM of 41 nm,an absolute PL quantum yield(QY)of 80%,and display excitation-independent PL behavior.Through comprehensive characterization,we identified the protonation of edge amino on NFEF-CDs as the key factor in achieving the narrow FWHM.Subsequently,we validated the broad applicability of solid superacid resins as catalysts for synthesizing CDs with narrow FWHM in the m-PD/ethanol system.Finally,we utilized a self-leveling method to prepare NFEF-CDs film on the surface of poly(methyl methacrylate)(PMMA)substrate and investigated the solid-state fluorescence properties of NFEF-CDs as well as their performance as luminescence solar concentrator(LSC)for photovoltaic conver-sion.The results revealed that the as-prepared LSC exhibit an internal quantum efficiency(η_(int))of 42.39%and an optical efficiency(η_(opt))of 0.68%.These findings demonstrate the promising prospects of NFEF-CDs in the field of LSCs and provide a theoretical basis for their application in photovoltaic conversion.
