期刊文献+
共找到72,143篇文章
< 1 2 250 >
每页显示 20 50 100
Preparation of functionalized upconversion nanoparticles for synergetic oxygen‑enhancing photodynamic/chemodynamic therapy
1
作者 CHU Huiyuan 《无机化学学报》 北大核心 2026年第2期413-427,共15页
An upconversion nanoparticle(NaErF_(4)∶Yb/Tm@NaLuF_(4)∶Yb@NaLuF_(4)∶Nd/Yb@NaLuF_(4),noted as UC)was designed,emitting strong red light by 808 nm laser.The mesoporous silica(mSiO_(2))shell co‑doped with chlorin e6(C... An upconversion nanoparticle(NaErF_(4)∶Yb/Tm@NaLuF_(4)∶Yb@NaLuF_(4)∶Nd/Yb@NaLuF_(4),noted as UC)was designed,emitting strong red light by 808 nm laser.The mesoporous silica(mSiO_(2))shell co‑doped with chlorin e6(Ce6)and triethoxy(1H,1H,2H,2H‑nonafluorohexyl)silane(TFS)was coated on the outer layer of UC,and then a layer of HKUST‑1 shell was coated.The obtained nanocomposite UC@Ce6/TFS@mSiO_(2)@HKUST‑1(noted as UCTSH)was used for the synergistic treatment of chemodynamic therapy(CDT)and photodynamic therapy(PDT).Interestingly,the nanostructures can specifically re lease Cu^(2+)in the acidic tumor microenvironment.Cu^(2+)reacts with excess hydrogen peroxide(H_(2)O_(2))in the tumor microenvironment to form cytotoxic hydroxyl radical.Secondly,Ce6,with the action of oxygen‑carrying TFS,selectively produces a large amount of singlet oxygen by 808 nm laser irradiation.UCTSH can enhance the anti‑tumor effects of PDT and CDT by increasing the production level of reactive oxygen species,without causing damage to normal cells. 展开更多
关键词 upconversion nanoparticles chemodynamic therapy photodynamic therapy synergistic therapy
在线阅读 下载PDF
The sequestration of metal nanoparticles in the liver:A trade-off between density and degradability
2
作者 Junjie Ma Li Zeng +14 位作者 Yaquan Liu Shunhao Wang Min Li Linlin Yao Gang Tang Ziniu Wang Jiexia Cheng Qi Wu Guangxuan Wang Chunzhen Shi Liqun Chen Runzeng Liu Jie Gao Guangbo Qu Guibin Jiang 《Journal of Environmental Sciences》 2026年第2期682-689,共8页
The widespread use and casual disposal of nanoproducts increase human exposure to nanoparticles(NPs),posing potential health risks.When coming into contact with biofluid,NPs passively move in the bloodstream and reach... The widespread use and casual disposal of nanoproducts increase human exposure to nanoparticles(NPs),posing potential health risks.When coming into contact with biofluid,NPs passively move in the bloodstream and reach target organs and cells.The nano-bio interactions,distribution,and fate of NPs are highly dependent on their physicochemical properties after direct exposure into the systemic circulation.In this study,silver nanoparticles(AgNPs)and gold nanoparticles(AuNPs)with the same size,shape,surface chemistry,and particle number but different densities were co-exposed to mice to explore their blood circulation and liver accumulation.The co-exposure avoids the individual differences in a single-material exposure model.Post-exposure,Au remained longer in the bloodstream than Ag,while 92.2%of the injected dose(%ID)of Ag accumulated in the liver compared to 78.0%for Au.Over a span of 3 to 72 h,Ag content in bloodstream increased while Au was undetectable.In the liver,the%ID of Ag sharply decreased to 9.4%,while the%ID of Au remained nearly unchanged.We proved the gradual dissociation of AgNPs into Ag ions using a fluorescent probe.Therefore,density-dependent dynamics of NPs in the blood caused greater liver accumulation of low-density Ag.However,the gradual degradation of AgNPs contributes to a high degree of distribution of Ag in the body while the AuNPs remain sequestered in the liver.This study implies that the dynamic transformation of NPs complicates their density-dependent retention,which are plausible to determine the accumulation and biological effects to the organisms. 展开更多
关键词 Metal nanoparticles Stability DENSITY DISSOLUTION CO-EXPOSURE Fluorescent probe
原文传递
Eco-Friendly Combat against Prostate Cancer:Green Chemistry Approach Using Biosynthesized Nanoparticles Functionalized with Propolis for Enhanced Anticancer Activity
3
作者 Awatif Rashed Z.Almotairy Eman Fayad +6 位作者 Fatimah Hadadi Ahmad F.Alhomodi Dalal Nasser Binjawhar Hanadi A.Katouah Bassma H.Elwakil Keshav Raj Paudel Mostafa El-Khatib 《Oncology Research》 2026年第4期577-593,共17页
Objectives:Prostate cancer cells often develop mechanisms to evade conventional therapies.Nanomedicine offers the potential for targeted drug delivery,improved tumor accumulation,and reduced systemic toxicity.This stu... Objectives:Prostate cancer cells often develop mechanisms to evade conventional therapies.Nanomedicine offers the potential for targeted drug delivery,improved tumor accumulation,and reduced systemic toxicity.This study biosynthesizes silver nanoparticles(NPP/AgONPs)functionalized with propolis,evaluates their antibacterial efficacy against uropathogenic strains of Escherichia coli(E.coli),and assesses their cytotoxic effect on cancer cell proliferation using the PC-3,human prostate epithelial cell line.Methods:The synthesized NPP/AgONPs physiochemical parameters were characterized,followed by in vitro assays to evaluate their antibacterial activity against multiple uropathogenic E.coli strains;determining the cytotoxicity against HPrEC and PC-3 cells by measuring cytotoxicity(CC_(50))and inhibition concentration(IC_(50)),respectively;analyzing cell cycle distribution and apoptosis via flow cytometry;and quantifying the reactive oxygen species(ROS),Caspase 3,and Caspase 8 expression in treated cells to elucidate mechanisms of cell death and growth inhibition.Results:NPP/AgONPs exhibited an average particle size of 22 nm,with four major X-ray diffraction(XRD)peaks corresponding to Joint Committee on Powder Diffraction Standards(JCPDS)No.01-1164,confirming their crystallinity.Moreover,the UV-vis absorbance at 390 nm yielded an energy gap of 2.45 eV.Antibacterial testing showed potent activity against the tested E.coli strains.In HPrEC and PC-3 cells,the CC_(50) was 262.04µg/mL,while the IC_(50) was 25.34μg/mL,respectively.Flow cytometry revealed increased apoptosis in the NPP/AgONPs-treated group across all stages,including early,late,and dead cells,compared with the controls.ROS,Caspase 3,and Caspase 8 levels were inflected in NPP/AgONPs-treated cells,showing apoptotic and growth-inhibitory effects.Conclusion:The propolis coating improves the nanoparticles’biocompatibility while enabling potent ROS-mediated apoptosis and cell-cycle disruption in PC-3 cells.These findings support the potential of NPP/AgONPs as a synergistic therapeutic platform,though optimization of dosing,detailed mechanism elucidation,and assessment of long-term safety are warranted. 展开更多
关键词 PROPOLIS green chemistry silver nanoparticles multidrug resistance ANTICANCER
暂未订购
Numerical simulation of nanoparticles dispersion and deposition in steel under Brownian motion and turbulent diffusion
4
作者 Xiao-Jia Zhou An-Yuan Deng +1 位作者 Qing-Shan Yang En-Gang Wang 《Journal of Iron and Steel Research International》 2026年第3期60-72,共13页
To investigate the dispersion and deposition behavior of the nanoparticles(NPs)in the molten steel under the combined effects of turbulent flow and Brownian motion,a 3D model utilizing volume of fluid-discrete phase m... To investigate the dispersion and deposition behavior of the nanoparticles(NPs)in the molten steel under the combined effects of turbulent flow and Brownian motion,a 3D model utilizing volume of fluid-discrete phase model was developed based on a small-size ingot casting process.A modified Brownian motion model was implemented into the simulation using user-defined function to more accurately predict the motion behavior and distribution of the NPs in the molten steel.The results show that the NPs tend to deposit at the bottom or disperse toward the wall under the turbulent flow.The introduction of Brownian motion increases the horizontal dispersion rate(DH)to 21.3%and reduces the bottom deposition rate by 12.8%.A reduction in the particle size and density promotes higher particle mobility,characterized by increased velocity and DH,along with diminished deposition.As the particle size decreases to 1×10^(-7)m,Brownian motion becomes a significant factor influencing the particle dynamics.Additionally,increasing the initial velocity of the molten steel results in a lower DH of the particles.However,once the velocity exceeds 0.15 m s^(-1),its influence on the particle velocity becomes negligible. 展开更多
关键词 Metal matrix nanocomposite NANOPARTICLE Brownian motion Horizontal dispersion rate DEPOSITION
原文传递
Preparation of ZnO Nanoparticles Incorporated into Cross-Linked Poly (Methyl Methacrylate) (PMMA) Polymer and Its Biological Application
5
作者 Nazeeha S.Alkayal 《Journal of Polymer Materials》 2026年第1期357-370,共14页
The development of polymer nanoparticle composites with enhanced thermal and antibacterial properties is essential for next-generation biomedical materials.However,conventional polymers often exhibit limited bioactivi... The development of polymer nanoparticle composites with enhanced thermal and antibacterial properties is essential for next-generation biomedical materials.However,conventional polymers often exhibit limited bioactivity and poor resistance to degradation,restricting their functional applications.The novelty of this study involves the combination of the bio-derived cross-linker 2,5-bis(aminomethyl)furan(BAF)into poly(methylmethacrylate)PMMA to form a cross-linked network incorporated with various ratios of ZnO nanoparticles(ZnO NPs),resulting in improved biological and thermal properties.The surface morphologies,material crystallinity,and thermal degradation properties of the synthesized BAF-PMMA/ZnO were investigated using Scanning Electron microscopy(SEM),Energy-Dispersive X-ray spectroscopy(EDX),X-ray diffraction(XRD),andThermogravimetric characterization technique(TGA),respectively.The prepared BAF-PMMA/ZnO nanocomposites showed an enhancement in the crystallinity after increasing the ratio of ZnO NPs compared to the amorphous cross-linked BAF-PMMA polymer.The thermal stability of nanocomposites was significantly enhanced after the introduction of ZnO NPs into crosslinked BAF-PMMA polymer.The resultant nanocomposites BAF-PMMA/ZnO were examined as antibacterial agents against the Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)bacterial strains.The results showed that most BAF-PMMA/ZnO nanocomposites have antibacterial activity against both bacterial species compared to the pure cross-linked BAF-PMMA polymer.The BAF-PMMA/ZnO 10 wt.%sample shows the highest inhibition zone of(16.3±0.33)against E.coli.These outcomes demonstrate that such nanocomposites offer a viable pathway towardmultipurpose biomaterials with exceptional structural and biological features. 展开更多
关键词 Cross-linked PMMA FURAN ZnO nanoparticle antibacterial E.COLI S.aureus
在线阅读 下载PDF
A Promising Strategy for Solvent-Regulated Selective Hydrogenation of 5-Hydroxymethylfurfural over Porous Carbon-Supported Ni-ZnO Nanoparticles
6
作者 Rulu Huang Chao Liu +4 位作者 Kaili Zhang Jianchun Jiang Ziqi Tian Yongming Chai Kui Wang 《Nano-Micro Letters》 2026年第1期130-143,共14页
Developing biomass platform compounds into high value-added chemicals is a key step in renewable resource utilization.Herein,we report porous carbon-supported Ni-ZnO nanoparticles catalyst(Ni-ZnO/AC)synthesized via lo... Developing biomass platform compounds into high value-added chemicals is a key step in renewable resource utilization.Herein,we report porous carbon-supported Ni-ZnO nanoparticles catalyst(Ni-ZnO/AC)synthesized via low-temperature coprecipitation,exhibiting excellent performance for the selective hydrogenation of 5-hydroxymethylfurfural(HMF).A linear correlation is first observed between solvent polarity(E_(T)(30))and product selectivity within both polar aprotic and protic solvent classes,suggesting that solvent properties play a vital role in directing reaction pathways.Among these,1,4-dioxane(aprotic)favors the formation of 2,5-bis(hydroxymethyl)furan(BHMF)with 97.5%selectivity,while isopropanol(iPrOH,protic)promotes 2,5-dimethylfuran production with up to 99.5%selectivity.Mechanistic investigations further reveal that beyond polarity,proton-donating ability is critical in facilitating hydrodeoxygenation.iPrOH enables a hydrogen shuttle mechanism where protons assist in hydroxyl group removal,lowering the activation barrier.In contrast,1,4-dioxane,lacking hydrogen bond donors,stabilizes BHMF and hinders further conversion.Density functional theory calculations confirm a lower activation energy in iPrOH(0.60 eV)compared to 1,4-dioxane(1.07 eV).This work offers mechanistic insights and a practical strategy for solvent-mediated control of product selectivity in biomass hydrogenation,highlighting the decisive role of solvent-catalyst-substrate interactions. 展开更多
关键词 Porous carbon-supported Ni-ZnO nanoparticles catalyst Selective hydrogenation 5-HYDROXYMETHYLFURFURal SOLVENT Proton-donating ability
在线阅读 下载PDF
Synergistic Amorphous Ni Core-N-Doped Carbon Shell Nanoparticles for Efficient Bifunctional Water Splitting
7
作者 Hao-Ran Cheng Hong Seok Kim 《Energy & Environmental Materials》 2026年第1期212-222,共11页
Amorphous metal-based catalysts are highly promising for water splitting due to their abundance of unsaturated active sites.Herein,we report a one-step,surfactant-free synthesis of amorphous nickel nanoparticles(NPs)e... Amorphous metal-based catalysts are highly promising for water splitting due to their abundance of unsaturated active sites.Herein,we report a one-step,surfactant-free synthesis of amorphous nickel nanoparticles(NPs)encapsulated in nitrogen-doped carbon shells(A-Ni@NC)via pulsed laser ablation in liquid(PLAL).The synergistic integration of the amorphous Ni core and a defect-rich N-doped carbon shell markedly enhanced the catalytic activities for both the hydrogen evolution reaction(HER)and oxygen evolution reaction(OER),with low overpotentials of 182 mV for HER and 288 mV for OER at 10 mA cm^(-2)in 1.0 m KOH.Furthermore,the bifunctional catalyst achieved a current density of 10 mA cm^(-2)at 1.63 V and retained 98.9%of its initial performance after 100 h of operation.The nitrogen-rich carbon shell not only offered abundant active sites and structural protection but also promoted charge transport.Density functional theory(DFT)calculations revealed that N-doping optimized intermediate adsorption energies,while the amorphous Ni core facilitated efficient electron transfer.This green and scalable synthesis strategy provides a promising platform for developing a wide range of transition metal@N-doped carbon hybrid catalysts for sustainable energy conversion applications. 展开更多
关键词 amorphous nickel nanoparticles core-shell structure ELECTROCATalYSIS N-doped carbon pulsed laser ablation in liquid water splitting
在线阅读 下载PDF
Effect of Addition of Er-TiB_(2)Dual-Phase Nanoparticles on Strength-Ductility of Al-Mn-Mg-Sc-Zr Alloy Prepared by Laser Powder Bed Fusion
8
作者 Li Suli Zhang Yanze +5 位作者 Yang Mengjia Zhang Longbo Xie Qidong Yang Laixia MaoFeng Chen Zhen 《稀有金属材料与工程》 北大核心 2026年第1期9-17,共9页
A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w... A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively. 展开更多
关键词 al-Mn-Mg-Sc-Zr alloy laser powder bed fusion nano-reinforcing phase synergistic enhancement
原文传递
航空航天用SiC_(p)/Al复合材料激光焊接研究进展
9
作者 张建勋 王志英 +2 位作者 白嘉瑜 李振岗 刘森洋 《航空制造技术》 北大核心 2026年第4期36-48,共13页
碳化硅颗粒增强铝基复合材料(SiC_(p)/Al)凭借高比强度、低密度及低热膨胀系数等优势,在轻量化、大型化航空航天装备领域应用前景广阔。然而,其熔化焊接时易生成Al_(4)C_(3)脆性相、气孔及颗粒偏聚等缺陷,严重制约工程应用,高效可靠焊... 碳化硅颗粒增强铝基复合材料(SiC_(p)/Al)凭借高比强度、低密度及低热膨胀系数等优势,在轻量化、大型化航空航天装备领域应用前景广阔。然而,其熔化焊接时易生成Al_(4)C_(3)脆性相、气孔及颗粒偏聚等缺陷,严重制约工程应用,高效可靠焊接需求日趋迫切。从常规激光焊接、能场辅助激光焊接及添加中间层激光焊接3方面系统综述航空航天用SiC_(p)/Al复合材料激光焊接的研究现状。连续/脉冲/摆动激光焊接仅通过工艺调控优化接头性能,无法抑制脆性相生成,且工艺窗口狭窄;外场辅助(电弧、磁场、超声等)激光焊接可有效稳定熔池,减少缺陷,细化晶粒,却难以阻止界面反应发生;中间层调控激光焊接通过引入活性元素重构界面反应路径,将有害相转化为强化相,成为性能跃升的关键。最后对SiC_(p)/Al复合材料激光焊接的未来研究热点进行展望,以期为该材料在航空航天领域的规模化可靠焊接提供参考。 展开更多
关键词 SiC_(p)/al复合材料 激光焊接 外场辅助 界面调控
在线阅读 下载PDF
Al含量对HVOF-NiCrAlY+APS-nYSZ热障涂层热循环行为的影响
10
作者 李超 程玉贤 +2 位作者 黎红英 王璐 陈卫杰 《航空材料学报》 北大核心 2026年第3期87-96,共10页
NiCrAlY是燃气轮机热障涂层经常采用的金属黏结层材料,本工作研究用于制造燃气轮机两种Al含量的NiCrAlY粉末对HVOF-NiCrAlY+APS-纳米结构YSZ(nanostructured YSZ,nYSZ)热障涂层在室温和1150℃之间热循环行为的影响。结果表明,HVOF-Ni25C... NiCrAlY是燃气轮机热障涂层经常采用的金属黏结层材料,本工作研究用于制造燃气轮机两种Al含量的NiCrAlY粉末对HVOF-NiCrAlY+APS-纳米结构YSZ(nanostructured YSZ,nYSZ)热障涂层在室温和1150℃之间热循环行为的影响。结果表明,HVOF-Ni25Cr5Al0.5Y表面Al_(2)O_(3)-TGO的生长速率低于HVOFNi22Cr10Al1Y。与微米结构YSZ(microstructured YSZ,mYSZ)/mYSZ界面相同,nYSZ/mYSZ界面也可成为裂纹源,导致在nYSZ层中形成局部裂纹网络。两种HVOF-NiCrAlY+APS-nYSZ热障涂层的失效方式与传统APS/HVOF-MCrAlY(M=Ni和Co)+APS-mYSZ相同,主要由于靠近HVOF-NiCrAlY/APS-nYSZ界面nYSZ层裂纹扩展与合并,Ni25Cr5Al0.5Y+nYSZ热循环寿命比Ni22Cr10Al1Y+nYSZ略高。同时,提高APS-YSZ层中YSZ/YSZ界面结合力,避免YSZ/YSZ界面和APS-YSZ外表面开裂,可以有效提高HVOF-MCrAlY+APS-YSZ热障涂层热循环寿命。 展开更多
关键词 燃气轮机 热障涂层 HVOF-NiCralY al含量 APS-nYSZ 热循环行为
在线阅读 下载PDF
铝酸盐体系中负向电压对SiC_(p)/Al复合材料微弧氧化膜层的影响
11
作者 杜春燕 杨思睿 +3 位作者 张瑞 孙焕明 黄树涛 刘成炜 《材料保护》 2026年第3期119-126,共8页
为研究铝酸盐电解液体系中,负向电压对SiC_(p)/Al复合材料表面微弧氧化膜层组织结构及性能的影响,采用扫描电子显微镜、X射线衍射仪、涂层附着力划痕仪、高阻计及电化学工作站等,对微弧氧化膜层的形貌、孔隙率、厚度、相组成、结合力、... 为研究铝酸盐电解液体系中,负向电压对SiC_(p)/Al复合材料表面微弧氧化膜层组织结构及性能的影响,采用扫描电子显微镜、X射线衍射仪、涂层附着力划痕仪、高阻计及电化学工作站等,对微弧氧化膜层的形貌、孔隙率、厚度、相组成、结合力、电绝缘性及耐蚀性进行了表征与分析。结果表明:负向电压能强化正向电压的作用,从而促进膜层的生长。随着负向电压的升高,微弧氧化膜层厚度逐渐增加,表面孔隙率逐渐减小,但负向电压过高会引起膜层局部烧蚀;负向电压对微弧氧化膜层与基体的结合力的影响较小;当负向电压为20 V时,膜层的绝缘电阻达到最大值,为1.68×10^(10)Ω;膜层的腐蚀电位随负向电压的升高先增大后减小,腐蚀电流密度则先减小后增大,即负向电压过高会导致耐蚀性降低. 展开更多
关键词 SiC_(p)/al复合材料 微弧氧化 负向电压 电绝缘性 耐蚀性
在线阅读 下载PDF
不同铜含量Al-Si-Mg铸造合金的时效析出行为
12
作者 周鹏飞 贲能军 +1 位作者 张小玮 惠为东 《机械工程材料》 北大核心 2026年第1期65-71,共7页
铸造了不同铜质量分数(0,0.6%,1.2%,2.1%)的Al-Si-Mg-Cu合金,并进行双级固溶(500℃×6 h+530℃×4 h,水淬)+时效(175℃保温0~96 h,空冷)的T6热处理,研究了铜含量对合金时效析出行为的影响,分析了硬度“双峰”现象的形成机制。... 铸造了不同铜质量分数(0,0.6%,1.2%,2.1%)的Al-Si-Mg-Cu合金,并进行双级固溶(500℃×6 h+530℃×4 h,水淬)+时效(175℃保温0~96 h,空冷)的T6热处理,研究了铜含量对合金时效析出行为的影响,分析了硬度“双峰”现象的形成机制。结果表明:铜质量分数不超过0.6%时合金硬度随时效时间延长先增大后减小,呈现单峰变化;铜质量分数不低于1.2%时合金出现硬度“双峰”现象,且第二个硬度峰值要略高于第一个。175℃下时效10 h后,低铜含量合金主要析出相为β′′相,时效16 h后主要析出相不变;175℃下时效10 h后,高铜含量合金主要析出相为Q′相,时效16 h后主要析出相为θ′相。高铜含量合金硬度“双峰”现象是由时效过程中析出相演变引起的,主要析出相随时效时间延长由Q′相转变为θ′相。 展开更多
关键词 al-Si-Mg-Cu合金 时效 析出相 硬度
在线阅读 下载PDF
涂层刀具钻削Al-50Si合金的钻削性能分析和钻削质量研究
13
作者 牛秋林 王星华 +2 位作者 戴福朋 向道辉 刘俐鹏 《宇航材料工艺》 北大核心 2026年第1期79-87,共9页
Al-50Si合金微观结构复杂,大量的块状初晶硅分布于铝基体中,使得其在钻削过程中由于两相异性产生刀尖粘屑,加剧刀具磨损。随着切削参数的变化,轴向力和钻削温度会随之改变,进而影响钻孔质量。针对此种难加工材料,本文分别采用TiAlN、TiC... Al-50Si合金微观结构复杂,大量的块状初晶硅分布于铝基体中,使得其在钻削过程中由于两相异性产生刀尖粘屑,加剧刀具磨损。随着切削参数的变化,轴向力和钻削温度会随之改变,进而影响钻孔质量。针对此种难加工材料,本文分别采用TiAlN、TiCN和TiN涂层硬质合金钻头对Al-50Si合金进行钻削实验,通过揭示不同切削参数下涂层钻头钻削轴向力的变化规律、涂层刀具磨损类型、对比孔出入口和孔壁质量的损伤程度,开展涂层刀具的钻削性能以及Al-50Si合金的钻孔质量研究。结果表明:涂层刀具表面发生铝基体粘结、崩刃等现象,磨损机理主要是粘结磨损与磨粒磨损;钻削轴向力Fz受进给量f影响最大;刀具剪切力越大,孔入口质量越好;孔壁质量与刀具的切削性能相关,加工表面会出现凹坑、划痕、切屑粘结以及基体撕裂等缺陷;孔出口质量受钻削轴向力Fz影响最大,钻削轴向力Fz越大,孔出口质量越差。TiAlN涂层刀具在切削速度v为70 m/min,进给量f为0.05 mm/r时,获得的钻削质量较好。 展开更多
关键词 al-50Si合金 涂层刀具 钻削性能 钻孔质量
在线阅读 下载PDF
Ti含量对热镀55wt.%Al-Zn镀层组织的影响
14
作者 张志坚 徐学明 +3 位作者 唐兴昌 惠洋 刘小华 李坤宇 《兰州理工大学学报》 北大核心 2026年第1期8-14,共7页
为研究Ti对热镀55wt.%Al-Zn镀层组织的影响,通过配置不同Ti含量55wt.%Al-Zn热浸镀锌铝液对钢基板进行热浸镀实验,利用光学显微镜(OM)、扫描电镜(SEM)及能谱仪(EDS),对不同Ti含量铝锌镀层的表面、截面及过渡层组织进行分析.结果表明:不... 为研究Ti对热镀55wt.%Al-Zn镀层组织的影响,通过配置不同Ti含量55wt.%Al-Zn热浸镀锌铝液对钢基板进行热浸镀实验,利用光学显微镜(OM)、扫描电镜(SEM)及能谱仪(EDS),对不同Ti含量铝锌镀层的表面、截面及过渡层组织进行分析.结果表明:不同Ti含量表面锌花组织结构基本一致,镀层表面锌花及合金层组织均由富Al相、富Zn相、富Si相及Al-Zn-Fe-Si化合物相构成;当Ti质量分数低于0.035%时,镀层锌花尺寸随Ti含量的增高而显著减小,含Ti镀层组织相对细小且致密;Ti的添加能够在镀液凝固过程中增加形核点,有助于锌花尺寸减小及细化镀层合金晶粒尺寸. 展开更多
关键词 铝锌镀层 TI含量 镀层组织 锌花 晶粒细化
在线阅读 下载PDF
瞬态冲击载荷下Al-Cu-Mg合金的力学性能及纳米析出相演化的动力学行为
15
作者 范才河 武帅 +4 位作者 胡泽艺 蒋文婷 毛垚晶 李济 钱嘉伟 《中国有色金属学报》 北大核心 2026年第1期133-144,共12页
基于瞬态冲击实验和分子动力学模拟,研究了超高应变速率下Al-Cu-Mg合金纳米析出相S′相的演变规律及动力学行为。实验结果表明,当瞬态冲击应变速率为7.0×10^(8)s^(-1)时,S′相发生了断裂,但析出相与基体边界没有变形,冲击后的抗拉... 基于瞬态冲击实验和分子动力学模拟,研究了超高应变速率下Al-Cu-Mg合金纳米析出相S′相的演变规律及动力学行为。实验结果表明,当瞬态冲击应变速率为7.0×10^(8)s^(-1)时,S′相发生了断裂,但析出相与基体边界没有变形,冲击后的抗拉强度为290.96 MPa;当瞬态冲击应变速率为3.35×10^(9)s^(-1)时,S′相发生明显弯曲变形,抗拉强度为356.59 MPa。分子动力学模拟结果表明,高应变速率下,位错快速增殖;而低剪切速率下,位错密度保持相对恒定,主要是由于瞬态冲击载荷下位错具有最大滑移速度(2.5Å/ps),从而决定了在一定的位错密度下的极限应变速率。在相同的应变速率下,当应变从8%增大到11%时,位错密度开始成倍增加,达到初始密度的20倍以上。瞬态冲击过程中大量位错连续剪切S′相,促使S′相中的原子扩散到铝基体,从而导致铝基体形貌发生改变。 展开更多
关键词 al-CU-MG合金 瞬态冲击 析出相 位错 动力学
在线阅读 下载PDF
Cr含量与热处理对Al-Si-Mg-Cu合金组织性能影响研究
16
作者 顾琪 周鹏飞 +2 位作者 贲能军 张小玮 惠为东 《特种铸造及有色合金》 北大核心 2026年第3期449-457,共9页
通过添加不同含量Cr,结合两种固溶处理工艺(SST1和SST2)及时效处理(T6),研究了Cr含量和热处理时Al-Si-Mg-Cu合金组织和性能的影响。结果表明,Cr的加入有效调控了富Fe相的形貌,抑制了β-Al5FeSi相的生成,促进了Al(Cr,Fe)Si弥散相的形成... 通过添加不同含量Cr,结合两种固溶处理工艺(SST1和SST2)及时效处理(T6),研究了Cr含量和热处理时Al-Si-Mg-Cu合金组织和性能的影响。结果表明,Cr的加入有效调控了富Fe相的形貌,抑制了β-Al5FeSi相的生成,促进了Al(Cr,Fe)Si弥散相的形成。随着Cr含量的增加,合金硬度显著提高,尤其在SST2处理条件下,硬度提升最大。同时,Cr的加入在固溶处理后增强了合金的抗拉强度和屈服强度,但也降低了塑性,尤其当Cr含量超过0.15%时,伸长率显著下降。TEM分析显示,Cr元素通过促进弥散相的析出提高了合金的强化效果。然而,合金时效态和固溶态硬度差值下降,说明弥散相的强化作用在时效阶段有所减弱。综合分析表明,Cr对铸造Al-Si-Mg-Cu合金的性能有显著影响,但其强化效果在时效过程中未能完全保持,需进一步优化处理工艺。 展开更多
关键词 al-Si-Mg-Cu铸造合金 CR 热处理 富Fe相 弥散相
原文传递
高阻Si衬底上预铺Al工艺对GaN材料晶体质量和射频损耗影响研究
17
作者 杨乾坤 彭大青 +3 位作者 李传皓 张东国 王克超 李忠辉 《固体电子学研究与进展》 2026年第1期6-10,共5页
采用金属有机化学气相沉积(Metal-organic chemical vapor deposition,MOCVD)技术在高阻Si(111)衬底上生长了氮化物材料,研究衬底的预铺Al工艺对衬底表面形貌、氮化镓结晶质量及射频损耗等的影响。结果表明,采用低温低流量长时间的预铺A... 采用金属有机化学气相沉积(Metal-organic chemical vapor deposition,MOCVD)技术在高阻Si(111)衬底上生长了氮化物材料,研究衬底的预铺Al工艺对衬底表面形貌、氮化镓结晶质量及射频损耗等的影响。结果表明,采用低温低流量长时间的预铺Al工艺,抑制了表面Al聚集物的形成,减少了AlN表面坑,提升了Si衬底上GaN材料的晶体质量。基于优化的预铺Al工艺,GaN(002)/(102)半高宽达到391 arcsec/510 arcsec,5 GHz下射频损耗为0.16 dB/mm,25 GHz下射频损耗为0.37 dB/mm。 展开更多
关键词 硅基氮化镓 预铺铝 射频损耗 晶体质量
原文传递
La微合金化对Al-Si合金热变形行为及其微观组织变化规律的影响
18
作者 凌云 陈宣 项雁玲 《热加工工艺》 北大核心 2026年第6期211-216,223,共7页
通过熔铸法制备不含La以及La含量为0.068%的Al-Si-La合金,将两种Al-Si-(La)合金进行等温热压缩试验,试验热变形温度分别为300℃和400℃,应变速率分别为0.01 s^(-1)和0.1 s^(-1),研究合金的热变形行为。使用金相显微镜(OM)、扫描电镜(SEM... 通过熔铸法制备不含La以及La含量为0.068%的Al-Si-La合金,将两种Al-Si-(La)合金进行等温热压缩试验,试验热变形温度分别为300℃和400℃,应变速率分别为0.01 s^(-1)和0.1 s^(-1),研究合金的热变形行为。使用金相显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)能谱分析和硬度仪等方式,研究不同La含量对Al-Si-La合金热变形微观组织和力学性能的影响。结果表明,两种合金的流变应力均随变形温度的升高和应变速率的减小而降低,添加La的Al-Si合金在300℃、0.1 s^(-1)热变形条件下呈现出稳定流变状态,同时La的加入增大了合金的峰值应力。La的添加会生成AlSiLa金属中间化合物,起到优化共晶Si相形貌和细化尺寸的作用,使热变形Al-Si合金的硬度增大。 展开更多
关键词 La微合金化 al-SI合金 热变形 微观组织
原文传递
电弧增材制造高强度Al-Mg-Sc系合金研究进展冶金缺陷、微观组织和力学性能
19
作者 马成勇 侯旭儒 +4 位作者 赵琳 阚成玲 曹洋 彭云 田志凌 《金属学报》 北大核心 2026年第1期29-46,共18页
电弧增材制造(WAAM)技术因其制造成本低、沉积效率高、成形构件无尺寸限制等特点,成为大型复杂构件一体化制造最具潜力的技术之一,尤其适用于焊接性能优异的Al-Mg-Sc系合金。基于此,本文详细综述了WAAM成形Al-Mg-Sc系合金的研究进展,包... 电弧增材制造(WAAM)技术因其制造成本低、沉积效率高、成形构件无尺寸限制等特点,成为大型复杂构件一体化制造最具潜力的技术之一,尤其适用于焊接性能优异的Al-Mg-Sc系合金。基于此,本文详细综述了WAAM成形Al-Mg-Sc系合金的研究进展,包括冶金缺陷、微观组织和成形性能。在WAAM中,通过优化丝材成分、打印工艺和引入层间搅拌摩擦加工(FSP)均能有效降低气孔率,改善微观组织和提升合金性能。成形合金最低气孔率约为0.026%;由于Sc强烈的微合金化作用,微观组织均为等轴晶,平均晶粒尺寸约为10μm,成形合金表现出优异的性能,直接时效后,合金最高抗拉强度可达470 MPa,且具有优异的塑性。然而,WAAM专用Al-Mg-Sc系合金丝材的研发、冶金缺陷形成的内在机理、粗大微米级Al3(Sc1-x,Zrx)相的调控以及多性能的探究仍需进一步解决。最后,基于机器学习在智能制造中的优势,对未来机器学习在WAAM成形中的应用进行了展望:正向性能预测与逆向成分/工艺求解,从而加速WAAM专用高强度铝合金丝材研发,并降低生产成本、缩短研制周期。 展开更多
关键词 电弧增材制造 高强度al-Mg-Sc合金 冶金缺陷 组织和性能 机器学习
原文传递
上一页 1 2 250 下一页 到第
使用帮助 返回顶部