In this paper,MCM-41 was synthesized by a soft template technique and MCM-41 supported CuO-CeO2 nano-sized catalysts with different Cu/Ce molar ratios were prepared by a deposition-precipitation method.N2 adsorption,H...In this paper,MCM-41 was synthesized by a soft template technique and MCM-41 supported CuO-CeO2 nano-sized catalysts with different Cu/Ce molar ratios were prepared by a deposition-precipitation method.N2 adsorption,HRTEM-EDS,H2-TPR,XPS characterization,as well as catalytic activity and durability tests for the catalytic combustion of chlorobenzene(CB)were conducted to explore the relationship between the structure and catalytic performance of the catalysts.It is revealed that cuCe(6:1)/MCM-41 has the highest activity and can completely catalyze the degradation of CB at 260℃.The reasons for the high activity of the catalysts are as follows:MCM-41,a type of mesoporous material which has large pore size and large specific surface area,is suitable as a catalyst carrier.The average diameter of nano-sized CuO and CeO2 particles is about 3-5 nm and adding CeO2 improves the dispersion of active component CuO,which are highly and evenly dispersed on the surface of MCM-41.Characterization results also explain why MCM-41 supported CuO-CeO2 with appropriate proportion can highly enhance the catalytic activity.The reason is that CeO2 acting as an oxygen-rich material can improve the mobility of oxygen species through continuous redox between Ce4^+and Ce3^+,and improve the catalytic performance of CuO for CB combustion.Besides,CuCe(6:1)/MCM-41 also displays good durability for CB combustion,both in the humid condition and in the presence of benzene,making it a promising catalytic material for the elimination of chlorinated VOCs.展开更多
The effect of hot-forging process was investigated on microstructural and mechanical properties of AZ31 B alloy and AZ31 B/1.5 vol.%Al2 O3 nanocomposite under static and cycling loading. The as-cast alloy and composit...The effect of hot-forging process was investigated on microstructural and mechanical properties of AZ31 B alloy and AZ31 B/1.5 vol.%Al2 O3 nanocomposite under static and cycling loading. The as-cast alloy and composite were firstly subjected to a homogenization heat treatment at 450 ℃ and then an open-die forging at 450 ℃. The results indicated that the presence of reinforcing particles led to grain refinement and improvement of dynamic recrystallization. The forging process was more effective to eliminate the porosity in the cast alloy workpiece. Microhardness of the forged composite was increased by up to 80% and 16%, in comparison with those of the cast and forged alloy samples, respectively. Ultimate tensile strength and maximum tensile strain of the composite were improved by up to 45% and 23%, compared with those of the forged alloy in similar regions. These enhancements were respectively 50% and 37% in the compression test. The composite exhibited a fatigue life improvement in the region with low applied strain;however, a degradation was observed in the high applied strain region. Unlike AZ31 B samples, tensile, compressive and high cycle fatigue behaviors of the composite showed less sensitivity to the applied strain, which can be attributed to the amount of porosity in the samples before and after the hot-forging.展开更多
Si3N4-Si2N2O composites were fabricated with amorphous nano-sized silicon nitride powders by the liquid phase sintering （ LPS ）. The Si2 N2O phase was generated by an in-situ reaction 2 Si3 N4 （ s ） ＋ 1.5 02 （ g...Si3N4-Si2N2O composites were fabricated with amorphous nano-sized silicon nitride powders by the liquid phase sintering （ LPS ）. The Si2 N2O phase was generated by an in-situ reaction 2 Si3 N4 （ s ） ＋ 1.5 02 （ g ） = 3 Si2 N2O （ s ） ＋ N2 （ g ） . The content of Si2 N2 O phase up to 60% in the volume was obtained at a sintering temperature of 1 650℃ and reduced when the sintering temperature increased or decreased, indicating the reaction is reversible. The mass loss, relative density and average grain size increased with increasing the sintering temperature. The average grain size was less than 500 nm when the sintering temperature was below 1 700 ℃. The sintering procedure contains a complex crystallization and a phase transition ： amorphous silicon nitride→equiaxial α- Si3 N4→ equiaxial β- Si3 N4→ rod- like Si2 N2O→ needle- like β- Si3N4 . Small round-shaped β→ Si3 N4 particles were entrapped in the Si2 N2O grains and a high density of staking faults was situated in the middle of Si2 N2O grains at a sintering temperature of 1 650 ℃. The toughness inereased from 3.5 MPa·m^1/2 at 1 600 ℃ to 7.2 MPa· m^1/2 at 1 800 ℃ . The hardness was as high as 21.5 GPa （Vickers） at 1 600 ℃ .展开更多
Nanosized 1 at% Sm^(3+)doped Y_(2)O_(3)powders were prepared by an ultrasound assisted sol-gel method.Y_(2)O_(3):Sm^(3+)powders crystallize in Y_(2)O_(3)pure cubic phase and XRD analysis shows that the as-used agitati...Nanosized 1 at% Sm^(3+)doped Y_(2)O_(3)powders were prepared by an ultrasound assisted sol-gel method.Y_(2)O_(3):Sm^(3+)powders crystallize in Y_(2)O_(3)pure cubic phase and XRD analysis shows that the as-used agitation protocol affects strongly the crystallite’s shape and mean size.The recorded emission spectra under λ_(em)=600 nm exhibit two absorption bands;the first one is assigned to O^(2-)→Sm^(3+)charge transfer state(CTS) with a maximum absorption at 223 nm,and the second is due to intraconfigurational transition 4f^(5)-4f^(5) of Sm^(3+) with a maximum absorption at 407 nm.The 223 and 407 nm transitions are attributed to characteristics intra-configurational transitions of Sm^(3+).All emission spectra are dominated by reddish/orange luminescence located at 606 nm and assigned to ^(4)G_(5/2)→^(6)H_(7/2) transition.It is found that the photoluminescence intensity of samples obtained under excitation at 407 nm is 60 times smaller than that obtained under 223 nm excitation.Decay time measurements of the ^(4)G_(5/2)→^(6)H_(7/2) luminescence transition indicate that decay time of nano-sized powder is significantly shorter than bulk material one.展开更多
The magnetization behavior of a CuFeO2 single crystal grown by the floating zone technique is investigated with a pulsed high magnetic field. We observe a series of field-induced multi-step-like transitions with hyste...The magnetization behavior of a CuFeO2 single crystal grown by the floating zone technique is investigated with a pulsed high magnetic field. We observe a series of field-induced multi-step-like transitions with hysteresis, of which the critical magnetic fields are temperature-dependent and show anisotropy. By using a pulsed high magnetic field up to 75 T, the magnetization behavior shows that the critical transition magnetic fields of spin- flip/flop shift to lower field regions with an increase in temperature. According to the magnetization curves, a complete magnetic phase diagram is depicted.展开更多
A series of nano-size gold catalysts were prepared by deposition-precipitation method using silica material promoted with different amounts of MgO as the carrier. The influences of MgO addition on the structure and pr...A series of nano-size gold catalysts were prepared by deposition-precipitation method using silica material promoted with different amounts of MgO as the carrier. The influences of MgO addition on the structure and property of the nano-size gold catalysts were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, O2 temperature-programmed desorption （O2-TPD）, and inductively coupled with plasma atomic emission spectroscopy （ICP-AES） techniques. The total oxidation of CO was chosen as the probe reaction. The results suggest that for the gold catalysts supported on the silica material after MgO modification, the size of the gold particles is pronouncedly reduced, the oxygen mobility is enhanced, and the catalytic activity for low-temperature CO oxidation is greatly improved. The gold catalyst modified by 6 wt% MgO （Mg/SiO2 weight ratio） shows higher CO oxidation activity, over which the temperature of CO total oxidation is lower about 150 K than that over the silica directly supported gold catalyst.展开更多
The preparation of nanometer γ-Fe2O3 through an electrochemical process was studied at room temperature, using a metal iron plate as sacrificing anode and a sheet of stainless steel as cathode, in non-aqueous mediate...The preparation of nanometer γ-Fe2O3 through an electrochemical process was studied at room temperature, using a metal iron plate as sacrificing anode and a sheet of stainless steel as cathode, in non-aqueous mediate containing （Bu）4 NBr as support electrolyre and 2% （vol%） water. The powdery particles obtained were then calcined at 300 ℃. The products were characterized by IR, XRD, SEM, TEM and laser particle size analyser, indicating the fine particle is a pure nanometer γ-Fe2O3. The morphology is like coneshaped and their average size is 22.0 nm. Furthermore the VSM spectrum shows that the particle＇s coercivity （3.9 × 10^3 A/m） is rather small, presenting the excellent super-paramagnetism.展开更多
Herein,we successfully prepare highly dispersed and uniform small nano-size nickel nanoparticles embedded on core-shell carbon spheres by confined-deposition method.The mesoporous silica layer containing surfactant co...Herein,we successfully prepare highly dispersed and uniform small nano-size nickel nanoparticles embedded on core-shell carbon spheres by confined-deposition method.The mesoporous silica layer containing surfactant coated on the surface of the polymer sphere provides confined space and effectively controls the growth of nickel nanoparticles during pyrolysis.At the same time,the introduction of nickel species has an impact on structure of the obtained carbon spheres,and it can promote the deposition of carbon to realize the adjustment from hollow to core-shell and then to solid spheres.Owing to the uniform distribution of Ni nanoparticles with small size,mesoporous structure,N-doping groups,high specified surface areas,and core-shell structure,the obtained catalyst shows exciting ability for the production of CO by reduction of CO_(2)with a maximum CO Faradaic efficiency of 98%,indicating its promising prospect in electro-reduction of CO_(2).展开更多
Using a liquid-solid phase inversion method, a hybrid matrix poly（vinylidene fluoride）（PVDF） membrane was prepared with alumina（Al2O3） nanoparticle addition. Pd/Fe nanoparticles（NPs） were successfully immobili...Using a liquid-solid phase inversion method, a hybrid matrix poly（vinylidene fluoride）（PVDF） membrane was prepared with alumina（Al2O3） nanoparticle addition. Pd/Fe nanoparticles（NPs） were successfully immobilized on the Al2O3/PVDF membrane, which was characterized by Scanning Electron Microscopy（SEM） and Transmission Electron Microscopy（TEM）. The micrographs showed that the Pd/Fe NPs were dispersed homogeneously. Several important experimental parameters were optimized, including the mechanical properties, contact angle and surface area of Al2O3/PVDF composite membranes with different Al2O3 contents. At the same time, the ferrous ion concentration and the effect of hydrophilization were studied. The results showed that the modified Al2O3/PVDF membrane functioned well as a support. The Al2O3/PVDF membrane with immobilized Pd/Fe NPs exhibited high efficiency in terms of dichloroacetic acid（DCAA） dechlorination. Additionally, a reaction pathway for DCAA dechlorination by Pd/Fe NPs immobilized on the Al2O3/PVDF membrane system was proposed.展开更多
基金Project supported by the National Natural Science Foundation of China(21577094)Zhejiang Public Welfare Technology Research Project(LGG19B070003)the Foundation of Science and Technology of Shaoxing City(2018C10019)。
文摘In this paper,MCM-41 was synthesized by a soft template technique and MCM-41 supported CuO-CeO2 nano-sized catalysts with different Cu/Ce molar ratios were prepared by a deposition-precipitation method.N2 adsorption,HRTEM-EDS,H2-TPR,XPS characterization,as well as catalytic activity and durability tests for the catalytic combustion of chlorobenzene(CB)were conducted to explore the relationship between the structure and catalytic performance of the catalysts.It is revealed that cuCe(6:1)/MCM-41 has the highest activity and can completely catalyze the degradation of CB at 260℃.The reasons for the high activity of the catalysts are as follows:MCM-41,a type of mesoporous material which has large pore size and large specific surface area,is suitable as a catalyst carrier.The average diameter of nano-sized CuO and CeO2 particles is about 3-5 nm and adding CeO2 improves the dispersion of active component CuO,which are highly and evenly dispersed on the surface of MCM-41.Characterization results also explain why MCM-41 supported CuO-CeO2 with appropriate proportion can highly enhance the catalytic activity.The reason is that CeO2 acting as an oxygen-rich material can improve the mobility of oxygen species through continuous redox between Ce4^+and Ce3^+,and improve the catalytic performance of CuO for CB combustion.Besides,CuCe(6:1)/MCM-41 also displays good durability for CB combustion,both in the humid condition and in the presence of benzene,making it a promising catalytic material for the elimination of chlorinated VOCs.
文摘The effect of hot-forging process was investigated on microstructural and mechanical properties of AZ31 B alloy and AZ31 B/1.5 vol.%Al2 O3 nanocomposite under static and cycling loading. The as-cast alloy and composite were firstly subjected to a homogenization heat treatment at 450 ℃ and then an open-die forging at 450 ℃. The results indicated that the presence of reinforcing particles led to grain refinement and improvement of dynamic recrystallization. The forging process was more effective to eliminate the porosity in the cast alloy workpiece. Microhardness of the forged composite was increased by up to 80% and 16%, in comparison with those of the cast and forged alloy samples, respectively. Ultimate tensile strength and maximum tensile strain of the composite were improved by up to 45% and 23%, compared with those of the forged alloy in similar regions. These enhancements were respectively 50% and 37% in the compression test. The composite exhibited a fatigue life improvement in the region with low applied strain;however, a degradation was observed in the high applied strain region. Unlike AZ31 B samples, tensile, compressive and high cycle fatigue behaviors of the composite showed less sensitivity to the applied strain, which can be attributed to the amount of porosity in the samples before and after the hot-forging.
基金Funded by the National Science Foundation of China ( No.50375037)
文摘Si3N4-Si2N2O composites were fabricated with amorphous nano-sized silicon nitride powders by the liquid phase sintering （ LPS ）. The Si2 N2O phase was generated by an in-situ reaction 2 Si3 N4 （ s ） ＋ 1.5 02 （ g ） = 3 Si2 N2O （ s ） ＋ N2 （ g ） . The content of Si2 N2 O phase up to 60% in the volume was obtained at a sintering temperature of 1 650℃ and reduced when the sintering temperature increased or decreased, indicating the reaction is reversible. The mass loss, relative density and average grain size increased with increasing the sintering temperature. The average grain size was less than 500 nm when the sintering temperature was below 1 700 ℃. The sintering procedure contains a complex crystallization and a phase transition ： amorphous silicon nitride→equiaxial α- Si3 N4→ equiaxial β- Si3 N4→ rod- like Si2 N2O→ needle- like β- Si3N4 . Small round-shaped β→ Si3 N4 particles were entrapped in the Si2 N2O grains and a high density of staking faults was situated in the middle of Si2 N2O grains at a sintering temperature of 1 650 ℃. The toughness inereased from 3.5 MPa·m^1/2 at 1 600 ℃ to 7.2 MPa· m^1/2 at 1 800 ℃ . The hardness was as high as 21.5 GPa （Vickers） at 1 600 ℃ .
基金supported by Nuclear Research Center of Algiers(CRNA),Department of Laser,Luminescence Laboratory。
文摘Nanosized 1 at% Sm^(3+)doped Y_(2)O_(3)powders were prepared by an ultrasound assisted sol-gel method.Y_(2)O_(3):Sm^(3+)powders crystallize in Y_(2)O_(3)pure cubic phase and XRD analysis shows that the as-used agitation protocol affects strongly the crystallite’s shape and mean size.The recorded emission spectra under λ_(em)=600 nm exhibit two absorption bands;the first one is assigned to O^(2-)→Sm^(3+)charge transfer state(CTS) with a maximum absorption at 223 nm,and the second is due to intraconfigurational transition 4f^(5)-4f^(5) of Sm^(3+) with a maximum absorption at 407 nm.The 223 and 407 nm transitions are attributed to characteristics intra-configurational transitions of Sm^(3+).All emission spectra are dominated by reddish/orange luminescence located at 606 nm and assigned to ^(4)G_(5/2)→^(6)H_(7/2) transition.It is found that the photoluminescence intensity of samples obtained under excitation at 407 nm is 60 times smaller than that obtained under 223 nm excitation.Decay time measurements of the ^(4)G_(5/2)→^(6)H_(7/2) luminescence transition indicate that decay time of nano-sized powder is significantly shorter than bulk material one.
基金Supported by the National Natural Science Foundation of China under Grant No 11104091the Guangxi Key Laboratory of Information Materials of Guilin University of Electronic Technology under Grant No 1210908-05-K
文摘The magnetization behavior of a CuFeO2 single crystal grown by the floating zone technique is investigated with a pulsed high magnetic field. We observe a series of field-induced multi-step-like transitions with hysteresis, of which the critical magnetic fields are temperature-dependent and show anisotropy. By using a pulsed high magnetic field up to 75 T, the magnetization behavior shows that the critical transition magnetic fields of spin- flip/flop shift to lower field regions with an increase in temperature. According to the magnetization curves, a complete magnetic phase diagram is depicted.
基金supported by the Youth Fund Project(2002B25)of Sichuan Department of Educationthe Scientific Research Foundation for Doctor from Yibin College of China(2010B12)
文摘A series of nano-size gold catalysts were prepared by deposition-precipitation method using silica material promoted with different amounts of MgO as the carrier. The influences of MgO addition on the structure and property of the nano-size gold catalysts were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, O2 temperature-programmed desorption （O2-TPD）, and inductively coupled with plasma atomic emission spectroscopy （ICP-AES） techniques. The total oxidation of CO was chosen as the probe reaction. The results suggest that for the gold catalysts supported on the silica material after MgO modification, the size of the gold particles is pronouncedly reduced, the oxygen mobility is enhanced, and the catalytic activity for low-temperature CO oxidation is greatly improved. The gold catalyst modified by 6 wt% MgO （Mg/SiO2 weight ratio） shows higher CO oxidation activity, over which the temperature of CO total oxidation is lower about 150 K than that over the silica directly supported gold catalyst.
文摘The preparation of nanometer γ-Fe2O3 through an electrochemical process was studied at room temperature, using a metal iron plate as sacrificing anode and a sheet of stainless steel as cathode, in non-aqueous mediate containing （Bu）4 NBr as support electrolyre and 2% （vol%） water. The powdery particles obtained were then calcined at 300 ℃. The products were characterized by IR, XRD, SEM, TEM and laser particle size analyser, indicating the fine particle is a pure nanometer γ-Fe2O3. The morphology is like coneshaped and their average size is 22.0 nm. Furthermore the VSM spectrum shows that the particle＇s coercivity （3.9 × 10^3 A/m） is rather small, presenting the excellent super-paramagnetism.
基金financially supported by the Natural Science Foundation of Hebei(Nos.B02020208088,H2020206514 and B2021208074)S&T Program of Hebei(Nos.20544401D,20314401D,206Z4406G,21314402D,22344402D,22373709D,22284601Z and 21344601D)Tianjin Science and Technology Project(No.19YFSLQY00070)。
文摘Herein,we successfully prepare highly dispersed and uniform small nano-size nickel nanoparticles embedded on core-shell carbon spheres by confined-deposition method.The mesoporous silica layer containing surfactant coated on the surface of the polymer sphere provides confined space and effectively controls the growth of nickel nanoparticles during pyrolysis.At the same time,the introduction of nickel species has an impact on structure of the obtained carbon spheres,and it can promote the deposition of carbon to realize the adjustment from hollow to core-shell and then to solid spheres.Owing to the uniform distribution of Ni nanoparticles with small size,mesoporous structure,N-doping groups,high specified surface areas,and core-shell structure,the obtained catalyst shows exciting ability for the production of CO by reduction of CO_(2)with a maximum CO Faradaic efficiency of 98%,indicating its promising prospect in electro-reduction of CO_(2).
基金supported by the Nature Science Foundation of Heilongjiang Province (No. B201410)the Postdoctoral Foundation Project of Heilongjiang Province (No. LBH-Z13128)+3 种基金the Science and Technology Research Program of Education Bureau of Heilongjiang Province (No. 12531206)the Special Scientific Research Projects of Harbin Normal University (12XQXG02)the National Nature Science Foundation of China (No. 41030743)the National Nature Science Foundation of China (No. 42171217)
文摘Using a liquid-solid phase inversion method, a hybrid matrix poly（vinylidene fluoride）（PVDF） membrane was prepared with alumina（Al2O3） nanoparticle addition. Pd/Fe nanoparticles（NPs） were successfully immobilized on the Al2O3/PVDF membrane, which was characterized by Scanning Electron Microscopy（SEM） and Transmission Electron Microscopy（TEM）. The micrographs showed that the Pd/Fe NPs were dispersed homogeneously. Several important experimental parameters were optimized, including the mechanical properties, contact angle and surface area of Al2O3/PVDF composite membranes with different Al2O3 contents. At the same time, the ferrous ion concentration and the effect of hydrophilization were studied. The results showed that the modified Al2O3/PVDF membrane functioned well as a support. The Al2O3/PVDF membrane with immobilized Pd/Fe NPs exhibited high efficiency in terms of dichloroacetic acid（DCAA） dechlorination. Additionally, a reaction pathway for DCAA dechlorination by Pd/Fe NPs immobilized on the Al2O3/PVDF membrane system was proposed.
