Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into...Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.展开更多
Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively invest...Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.展开更多
Pulsed dynamic electrolysis(PDE),driven by renewable energy,has emerged as an innovative electrocatalytic conversion method,demonstrating significant potential in addressing global energy challenges and promoting sust...Pulsed dynamic electrolysis(PDE),driven by renewable energy,has emerged as an innovative electrocatalytic conversion method,demonstrating significant potential in addressing global energy challenges and promoting sustainable development.Despite significant progress in various electrochemical systems,the regulatory mechanisms of PDE in energy and mass transfer and the lifespan extension of electrolysis systems,particularly in water electrolysis(WE)for hydrogen production,remain insufficiently explored.Therefore,there is an urgent need for a deeper understanding of the unique contributions of PDE in mass transfer enhancement,microenvironment regulation,and hydrogen production optimization,aiming to achieve low-energy consumption,high catalytic activity,and long-term stability in the generation of target products.Here,this review critically examines the microenvironmental effects of PDE on energy and mass transfer,the electrode degradation mechanisms in the lifespan extension of electrolysis systems,and the key factors in enhancing WE for hydrogen production,providing a comprehensive summary of current research progress.The review focuses on the complex regulatory mechanisms of frequency,duty cycle,amplitude,and other factors in hydrogen evolution reaction(HER)performance within PDE strategies,revealing the interrelationships among them.Finally,the potential future directions and challenges for transitioning from laboratory studies to industrial applications are proposed.展开更多
Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining...Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.展开更多
Non-metallic inclusions in steel are a significant challenge,affecting material properties and leading to issues such as stress concentration,cracking,and accelerated corrosion.Current methods for removing inclusions,...Non-metallic inclusions in steel are a significant challenge,affecting material properties and leading to issues such as stress concentration,cracking,and accelerated corrosion.Current methods for removing inclusions,including bubble,electromagnetic stirring,filtration separation,fluid flow,and sedimentation,often struggle with the removal of fine inclusions.Apart from these known methods,pulsed electric current(PEC),as an emerging technology,has demonstrated immense potential and environmental advantages.PEC offers adjustable current parameters and simple equipment,making it an attractive alternative to traditional methods.Its green energy-saving features and excellent results in regulating inclusion morphology and migration,as well as inhibiting submerged entry nozzle(SEN)clogging,make it a promising technology.In comparison to continuous current technology,PEC has shown significant advantages in regulating inclusions,not only improving purification efficiency but also demonstrating outstanding performance in flow stability and energy consumption.The ability of PEC to efficiently reduce inclusion numbers enhances the purity and quality of molten steel,improving its mechanical properties.Currently,the theoretical basis for controlling the movement of inclusions by current is mainly composed of three major theories:the double electric layer theory,electromagnetic force reverse separation theory,and electric free energy drive theory.These theories together form an important framework for researchers to understand and optimize the behavior of impurity movement controlled by electric current.Looking ahead,PEC is expected to pave the way for new solutions in directional regulation of inclusion migration,efficient inclusion removal,SEN clogging prevention,and the purification of molten steel.展开更多
In a pulsed plasma thruster,the voltage distribution between the electrodes is a key factor that influences the ionization process.However,few researchers have conducted in-depth studies of this phenomenon in the past...In a pulsed plasma thruster,the voltage distribution between the electrodes is a key factor that influences the ionization process.However,few researchers have conducted in-depth studies of this phenomenon in the past.Reported here are measurements of the voltage distribution between the plates of a parallel-plate pulsed plasma thruster under different discharge voltages,based on which the variations in the total circuit inductance and resistance as well as those between the plates are calculated.The results show that the time-averaged voltage across the plates accounts for 28.7%-50.4%of the capacitor voltage.As the capacitor initial voltage increases from 1250 V to 2000 V,the voltage across the plates rises,but its proportion relative to the capacitor voltage decreases.For every 250 V increase in the capacitor initial voltage,the average voltage proportion across the plates decreases by approximately 2%-3%.Additionally,the voltage proportion decreases gradually from the end near the propellant outward.The voltage distribution ratio between the plates is correlated with the proportions of the resistance and inductance between the plates relative to the total circuit.展开更多
The transition of hydrogen sourcing from carbon-intensive to water-based methodologies is underway,with renewable energy-powered proton exchange membrane water electrolysis(PEMWE)emerging as the preeminent pathway for...The transition of hydrogen sourcing from carbon-intensive to water-based methodologies is underway,with renewable energy-powered proton exchange membrane water electrolysis(PEMWE)emerging as the preeminent pathway for hydrogen production.Despite remarkable advancements in this field,confronting the sluggish electrochemical kinetics and inherent high-energy consumption arising from deteriorated mass transport within PEMWE systems remains a formidable obstacle.This impediment stems primarily from the hindered protons mass transfer and the untimely hydrogen bubbles detachment.To address these challenges,we harness the inherent variability of electrical energy and introduce an innovative pulsed dynamic water electrolysis system.Compared to constant voltage electrolysis(hydrogen production rate:51.6 m L h^(-1),energy consumption:5.37 kWh Nm-^(3)H_(2)),this strategy(hydrogen production rate:66 m L h^(-1),energy consumption:3.83 kWh Nm-^(3)H_(2))increases the hydrogen production rate by approximately 27%and reduces the energy consumption by about 28%.Furthermore,we demonstrate the practicality of this system by integrating it with an off-grid photovoltaic(PV)system designed for outdoor operation,successfully driving a hydrogen production current of up to 500 mA under an average voltage of approximately 2 V.The combined results of in-situ characterization and finite element analysis reveal the performance enhancement mechanism:pulsed dynamic electrolysis(PDE)dramatically accelerates the enrichment of protons at the electrode/solution interface and facilitates the release of bubbles on the electrode surface.As such,PDE-enhanced PEMWE represents a synergistic advancement,concurrently enhancing both the hydrogen generation reaction and associated transport processes.This promising technology not only redefines the landscape of electrolysis-based hydrogen production but also holds immense potential for broadening its application across a diverse spectrum of electrocatalytic endeavors.展开更多
In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not ...In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not only stable single-pulse state, but also special mode-locked pulses with the characteristics of high energy and noisy behaviors at proper pump power and cavity polarization state. In addition, we have deeply investigated the real-time spectral evolutions of the mode-locked pulses through the dispersive Fourier transformation(DFT) technique. It can be found that the pulse regime can actually consist of a lot of small noise pulses with randomly varying intensities. We believe that these results will further enrich the nonlinear dynamical processes in the ultrafast lasers.展开更多
The paper is an introduction to the front-end pulse acquisition and the back-end pulse biomimetic reproduction system.This system is capable of faithfully replicating the complete pulse waveform collected at the front...The paper is an introduction to the front-end pulse acquisition and the back-end pulse biomimetic reproduction system.This system is capable of faithfully replicating the complete pulse waveform collected at the front end.Traditional Chinese Medicine(TCM)practitioners analyze and diagnose the pulse patterns at the replication end.Meanwhile,the obtained pulse waveforms are analyzed and learnt by a neural network based on key diagnostic points in TCM pulse taking,which enables the determination of the corresponding relationships between different pulse waveforms and various pulse patterns in TCM pulse taking.With the support of clinical samples,an auxiliary diagnostic system for TCM pulse patterns ensures the accuracy of pulse pattern replication.展开更多
A mid-infrared femtosecond pulse laser with a single cycle and high intensity is an ideal driving light source for generating isolated attosecond pulses. Due to current experimental limitations, it is difficult to dir...A mid-infrared femtosecond pulse laser with a single cycle and high intensity is an ideal driving light source for generating isolated attosecond pulses. Due to current experimental limitations, it is difficult to directly achieve this type of laser light source in the laboratory. In this paper, we obtain such an ideal light source by adding a Ti sapphire pulse to the combined pulse laser consisting of two mid-infrared pulses. Specifically, by combining the synthesized pulse consisting of 8 fs/1200 nm/1.62 × 10^(14)W cm^(-2)and 12 fs/1800 nm/2.71 × 10^(14)W cm^(-2)with an additional 8 fs/800 nm/1.26 × 10^(14)W cm^(-2)Ti sapphire pulse, the resulting electric field waveform is very close to that of a 1170 nm femtosecond pulse with an intensity of 1.4 × 10^(15)W cm^(-2), a single-cycle pulse width, and a carrier-envelope phase of 0.25π. Numerical simulations show that both cases produce high-order harmonic emission spectra with broadband supercontinuum spectra, however, the bandwidth of the supercontinuum spectra and the harmonic intensities in the synthesized pulses are significantly better than those in the single1170 nm pulse. After inverse Fourier transform, we obtain 66 as a high-intensity isolated attosecond pulse, whose intensity is five orders of magnitude higher than that of a monochromatic field. Here, the phase differences between three combined pulse lasers have little effect on the numerical simulation results when they vary in the range of 0.3π.展开更多
Pulsed magnet technology is the only way to generate ultra-strong magnetic fields higher than 45 T so far.However,the inherently fast-changing field strength(typically on the order of 1000 T/s)poses significant challe...Pulsed magnet technology is the only way to generate ultra-strong magnetic fields higher than 45 T so far.However,the inherently fast-changing field strength(typically on the order of 1000 T/s)poses significant challenges for spectroscopic measurements which rely on time integration of signals to improve spectral qualities.In this work,we report high-sensitivity spectroscopic measurements under pulsed high magnetic fields employing the long flat-top pulsed magnetic field technique.By means of a multiple-capacitor power supply,we were able to generate pulsed high magnetic fields with controllable flat-top pulse width and field stabilities.By synchronizing spectroscopic measurements with the waveform of the flattop magnetic field,the integration time of each spectrum can be increased by up to 100 times compared with that of the conventional spectroscopic measurements under pulsed magnetic fields,thus enabling high-sensitivity spectroscopic measurements under ultra-strong pulsed magnetic fields.These findings promise an efficient way to significantly improve the performance and extend the application of optical measurements under pulsed high magnetic fields.展开更多
Doping with Ga effectively enhances the crystal quality and optical detection efficiency of zinc oxide(Zn O)single crystals,which has attracted considerable research interest in radiation detection.The application of ...Doping with Ga effectively enhances the crystal quality and optical detection efficiency of zinc oxide(Zn O)single crystals,which has attracted considerable research interest in radiation detection.The application of Zn O:Ga(GZO)in nuclear energy is particularly significant and fascinating at the fundamental level,enabling neutron/gamma discrimination while preserving the response time properties of the single crystal in sub-nanoseconds,maximizing the effective counting rate of the pulsed radiation field.In this study,the single-particle waveform discrimination characteristics of GZO were evaluated for five charged particles(α,β,H^(+),Li^(+),and O^(8+)and two prevalent uncharged particles(neutrons and gamma rays).Based on the timecorrelation single-photon counting(TCSPC)method,the luminescence decay time constants of the charged particles in the GZO crystal were determined as follows:1.21 ns for H^(+),1.50 ns for Li^(+),1.70 ns for O^(8+),1.56 ns forαparticles,and 1.09 ns forβparticles.Visible differences in the excitation time spectra curves were observed.Using the conventional time-domain or frequency-domain waveform discrimination techniques,waveform discrimination of 14.9 Me V neutrons and secondary gamma rays generated by the CPNG-6 device based on GZO scintillation was successfully implemented.The neutron signal constituted 77.93%of the total,indicating that GZO exhibited superior neutron/gamma discrimination sensitivity compared with that of a commercial stilbene crystal.Using the neutron/gamma screening outcomes,we reconstructed the voltage pulse height,charge height,and neutron multiplication time spectra of the pulsed neutron radiation field.The reconstructed neutron multiplication time spectrum exhibited a deviation of less than 3%relative to the result obtained using a commercial stilbene scintillator.This is the first report in the open literature on the neutron/gamma discrimination and reconstruction of Zn O pulsed radiation-field information.展开更多
As a critical component of pulse solid rocket motors(SRMs),the soft pulse separation device(PSD)is vital in enabling multi-pulse propulsion and has become a breakthrough in SRM engineering applications.To investigate ...As a critical component of pulse solid rocket motors(SRMs),the soft pulse separation device(PSD)is vital in enabling multi-pulse propulsion and has become a breakthrough in SRM engineering applications.To investigate the opening performance of the PSD,an axial PSD incorporating a star-shaped prefabricated defect was designed.The opening process was simulated using peridynamics,yielding the strain field distribution and the corresponding failure mode.A single-opening verification test was conducted.The simulation results showed good agreement with the experimental data,demonstrating the reliability of the peridynamic modeling approach.Furthermore,the effects of the prefabricated defect shape and depth on the opening performance of the PSD were analyzed through simulation.The research results indicate that the established constitutive model and failure criteria based on peridynamics can reasonably predict the failure location and the opening pressure of the soft PSD.Under the impact loading,the weak zone of the soft PSD firstly ruptures,and the damaged area gradually propagates along with the prefabricated defect,eventually leading to complete separation.A smaller prefabricated defect depth or a wider prefabricated defect distribution can cause a reduction in opening pressure.These research results provide valuable guidance for the preliminary design and optimization of PSDs in pulse solid rocket motors.展开更多
This study examines the high-order harmonic radiation behavior of MgO crystals driven by combined pulses based on the numerical solution of the semiconductor Bloch equation.We found that compared with the monochromati...This study examines the high-order harmonic radiation behavior of MgO crystals driven by combined pulses based on the numerical solution of the semiconductor Bloch equation.We found that compared with the monochromatic pulse,the MgO crystal can radiate a continuous harmonic spectrum with two platforms driven by the three-color combined pulse.The reason is that under the three-color combined pulse,the electron ionization and recombination can be effectively controlled within a half-optical cycle of the laser pulse.Using this continuous spectrum,we synthesized an isolated attosecond pulse with a duration of approximately 370 as.This study provides a new perspective on all-solid-state compact optical devices.展开更多
We demonstrated a new type of MAX phase material,chromium titanium aluminum carbide(Cr_(2)TiAlC_(2)) polymer film,to generate a passively Q-switched erbium-doped fiber laser(EDFL).The film thickness was measured to be...We demonstrated a new type of MAX phase material,chromium titanium aluminum carbide(Cr_(2)TiAlC_(2)) polymer film,to generate a passively Q-switched erbium-doped fiber laser(EDFL).The film thickness was measured to be around 45 μm,which was fabricated using the embedding method with polyvinyl alcohol(PVA) polymer as hoster.The saturable absorber(SA) film demonstrates a dual-wavelength passively Q-switched EDFL which operates at 1 531 nm and 1 560.19 nm,respectively.The Q-switching pulse duration could be varied from 2.46 μs to 770 ns,while the repetition rate varied from 92.76 kHz to 106.6 kHz with an increasing input pumping range from 154 mW to 300 mW.The maximum output power and pulse energy of 15.05 mW and 141.18 nJ were obtained at the maximum input power of 300 mW,respectively.展开更多
Attosecond light pulses have revolutionized the study of electron dynamics in materials by enabling the observation of ultrafast processes with unprecedented attosecond temporal resolution.They are primarily generated...Attosecond light pulses have revolutionized the study of electron dynamics in materials by enabling the observation of ultrafast processes with unprecedented attosecond temporal resolution.They are primarily generated through the process of high-order harmonic generation.This paper presents a comprehensive setup for attosecond pulse generation and measurement.Using a 900 nm,7 mJ,and 7 fs femtosecond laser with stabilized carrier-envelope phase,we employ polarization gating to generate a near single-cycle,linearly polarized pulse that interacts with neon gas to produce a broadband extreme-ultraviolet continuum with a cutoff photon energy of∼120 eV.The temporal and spectral characteristics of the generated single attosecond pulses are measured using an attosecond streak camera,and the pulse duration is determined to be 59 as through the frequency-resolved optical gating for complete reconstruction of attosecond bursts retrieval algorithm.As part of the Synergetic Extreme Condition User Facility,this setup will facilitate ultrafast research in transient absorption and photoelectron spectroscopy,providing global users with a powerful tool for studying electron dynamics in various materials.展开更多
We propose an all-optical,single-laser-pulse scheme for generating a dense relativistic strongly magnetized electron-positron pair plasma.The scheme involves the interaction of an extremely intense(I■10^(24) W/cm^(2)...We propose an all-optical,single-laser-pulse scheme for generating a dense relativistic strongly magnetized electron-positron pair plasma.The scheme involves the interaction of an extremely intense(I■10^(24) W/cm^(2))circularly polarized laser pulse with a solid-density target containing a conical cavity.Through full-scale three-dimensional particle-in-cell simulations that account for quantum electrodynamic effects,it is shown that this interaction results in two significant outcomes:first,the generation of quasi-static magnetic fields reaching tens of gigagauss,and,second,the production of large quantities of electron-positron pairs(up to 10^(13))via the Breit-Wheeler process.The e^(-)e^(+)plasma becomes trapped in the magnetic field and remains confined in a small volume for hundreds of femtoseconds,far exceeding the laser timescale.The dependence of pair plasma parameters,as well as the efficiency of plasma production and confinement,is discussed in relation to the properties of the laser pulse and the target.Realizing this scheme experimentally would enable the investigation of physical processes relevant to extreme astrophysical environments.展开更多
High-power laser pulses interacting with targets can generate intense electromagnetic pulses(EMPs),which can disrupt physical experimental diagnostics and even damage diagnostic equipment,posing a threat to the reliab...High-power laser pulses interacting with targets can generate intense electromagnetic pulses(EMPs),which can disrupt physical experimental diagnostics and even damage diagnostic equipment,posing a threat to the reliable operation of experiments.In this study,EMPs resulting from multi-petawatt laser irradiating nitrogen gas jets were systematically analyzed and investigated.The experimental results revealed that the EMP amplitude is positively correlated with the quantity and energy of the electrons captured and accelerated by the plasma channel.These factors are reflected by parameters such as laser energy and nitrogen gas jet pressure.Additionally,we propose several potential sources of EMPs produced by laser-irradiated gas jets and separately analyzed their spatiotemporal distributions.The findings provide insight into the mechanisms of EMP generation and introduce a new approach to achieve controllable EMPs by regulating the laser energy and gas jet pressure.展开更多
基金National Key Research and Development Program of China(2021YFB3700801)。
文摘Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.
文摘Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.
基金financially supported by the Key Research and Development Program of Heilongjiang Province(No.2024ZXJ03C06)National Natural Science Foundation of China(No.52476192,No.52106237)+1 种基金Natural Science Foundation of Heilongjiang Province(No.YQ2022E027)Technology Project of China Datang Technology Innovation Co.,Ltd(No.DTKC-2024-20610).
文摘Pulsed dynamic electrolysis(PDE),driven by renewable energy,has emerged as an innovative electrocatalytic conversion method,demonstrating significant potential in addressing global energy challenges and promoting sustainable development.Despite significant progress in various electrochemical systems,the regulatory mechanisms of PDE in energy and mass transfer and the lifespan extension of electrolysis systems,particularly in water electrolysis(WE)for hydrogen production,remain insufficiently explored.Therefore,there is an urgent need for a deeper understanding of the unique contributions of PDE in mass transfer enhancement,microenvironment regulation,and hydrogen production optimization,aiming to achieve low-energy consumption,high catalytic activity,and long-term stability in the generation of target products.Here,this review critically examines the microenvironmental effects of PDE on energy and mass transfer,the electrode degradation mechanisms in the lifespan extension of electrolysis systems,and the key factors in enhancing WE for hydrogen production,providing a comprehensive summary of current research progress.The review focuses on the complex regulatory mechanisms of frequency,duty cycle,amplitude,and other factors in hydrogen evolution reaction(HER)performance within PDE strategies,revealing the interrelationships among them.Finally,the potential future directions and challenges for transitioning from laboratory studies to industrial applications are proposed.
基金funded on the one hand by Agence de l'Innovation de Défense(AID)grant reference number 2021650044on the other hand by Ecole Centrale de Nantes。
文摘Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.
基金supported by the Fundamental Research Funds for the Central Universities(No.FRF-BD-23-01).
文摘Non-metallic inclusions in steel are a significant challenge,affecting material properties and leading to issues such as stress concentration,cracking,and accelerated corrosion.Current methods for removing inclusions,including bubble,electromagnetic stirring,filtration separation,fluid flow,and sedimentation,often struggle with the removal of fine inclusions.Apart from these known methods,pulsed electric current(PEC),as an emerging technology,has demonstrated immense potential and environmental advantages.PEC offers adjustable current parameters and simple equipment,making it an attractive alternative to traditional methods.Its green energy-saving features and excellent results in regulating inclusion morphology and migration,as well as inhibiting submerged entry nozzle(SEN)clogging,make it a promising technology.In comparison to continuous current technology,PEC has shown significant advantages in regulating inclusions,not only improving purification efficiency but also demonstrating outstanding performance in flow stability and energy consumption.The ability of PEC to efficiently reduce inclusion numbers enhances the purity and quality of molten steel,improving its mechanical properties.Currently,the theoretical basis for controlling the movement of inclusions by current is mainly composed of three major theories:the double electric layer theory,electromagnetic force reverse separation theory,and electric free energy drive theory.These theories together form an important framework for researchers to understand and optimize the behavior of impurity movement controlled by electric current.Looking ahead,PEC is expected to pave the way for new solutions in directional regulation of inclusion migration,efficient inclusion removal,SEN clogging prevention,and the purification of molten steel.
基金supported by the Beijing Natural Science Foundation(No.QY24166).
文摘In a pulsed plasma thruster,the voltage distribution between the electrodes is a key factor that influences the ionization process.However,few researchers have conducted in-depth studies of this phenomenon in the past.Reported here are measurements of the voltage distribution between the plates of a parallel-plate pulsed plasma thruster under different discharge voltages,based on which the variations in the total circuit inductance and resistance as well as those between the plates are calculated.The results show that the time-averaged voltage across the plates accounts for 28.7%-50.4%of the capacitor voltage.As the capacitor initial voltage increases from 1250 V to 2000 V,the voltage across the plates rises,but its proportion relative to the capacitor voltage decreases.For every 250 V increase in the capacitor initial voltage,the average voltage proportion across the plates decreases by approximately 2%-3%.Additionally,the voltage proportion decreases gradually from the end near the propellant outward.The voltage distribution ratio between the plates is correlated with the proportions of the resistance and inductance between the plates relative to the total circuit.
基金National Natural Science Foundation of China(No.52476192,No.52106237)Natural Science Foundation of Heilongjiang Province(No.YQ2022E027)。
文摘The transition of hydrogen sourcing from carbon-intensive to water-based methodologies is underway,with renewable energy-powered proton exchange membrane water electrolysis(PEMWE)emerging as the preeminent pathway for hydrogen production.Despite remarkable advancements in this field,confronting the sluggish electrochemical kinetics and inherent high-energy consumption arising from deteriorated mass transport within PEMWE systems remains a formidable obstacle.This impediment stems primarily from the hindered protons mass transfer and the untimely hydrogen bubbles detachment.To address these challenges,we harness the inherent variability of electrical energy and introduce an innovative pulsed dynamic water electrolysis system.Compared to constant voltage electrolysis(hydrogen production rate:51.6 m L h^(-1),energy consumption:5.37 kWh Nm-^(3)H_(2)),this strategy(hydrogen production rate:66 m L h^(-1),energy consumption:3.83 kWh Nm-^(3)H_(2))increases the hydrogen production rate by approximately 27%and reduces the energy consumption by about 28%.Furthermore,we demonstrate the practicality of this system by integrating it with an off-grid photovoltaic(PV)system designed for outdoor operation,successfully driving a hydrogen production current of up to 500 mA under an average voltage of approximately 2 V.The combined results of in-situ characterization and finite element analysis reveal the performance enhancement mechanism:pulsed dynamic electrolysis(PDE)dramatically accelerates the enrichment of protons at the electrode/solution interface and facilitates the release of bubbles on the electrode surface.As such,PDE-enhanced PEMWE represents a synergistic advancement,concurrently enhancing both the hydrogen generation reaction and associated transport processes.This promising technology not only redefines the landscape of electrolysis-based hydrogen production but also holds immense potential for broadening its application across a diverse spectrum of electrocatalytic endeavors.
基金supported by the Guangdong Basic and Applied Basic Research Foundation (No.2023A1515010093)the Shenzhen Fundamental Research Program (Stable Support Plan Program)(Nos.JCYJ20220809170611004, 20231121110828001 and 20231121113641002)the National Taipei University of Technology-Shenzhen University Joint Research Program (No.2024001)。
文摘In this paper, we have demonstrated an Er-doped ultrafast laser with a single mode fiber-gradient index multimode fiber-single mode fiber(SMF-GIMF-SMF, SMS) structure as saturable absorber(SA), which can generate not only stable single-pulse state, but also special mode-locked pulses with the characteristics of high energy and noisy behaviors at proper pump power and cavity polarization state. In addition, we have deeply investigated the real-time spectral evolutions of the mode-locked pulses through the dispersive Fourier transformation(DFT) technique. It can be found that the pulse regime can actually consist of a lot of small noise pulses with randomly varying intensities. We believe that these results will further enrich the nonlinear dynamical processes in the ultrafast lasers.
基金Key R&D Plan of Liaoning Province(No.202000357-JH13/103):Construction of Liaoning Traditional Chinese Medicine Industry Technology Innovation Research InstituteNational Key Research and Development Plan Special Project(No.2019JH2/10300040)。
文摘The paper is an introduction to the front-end pulse acquisition and the back-end pulse biomimetic reproduction system.This system is capable of faithfully replicating the complete pulse waveform collected at the front end.Traditional Chinese Medicine(TCM)practitioners analyze and diagnose the pulse patterns at the replication end.Meanwhile,the obtained pulse waveforms are analyzed and learnt by a neural network based on key diagnostic points in TCM pulse taking,which enables the determination of the corresponding relationships between different pulse waveforms and various pulse patterns in TCM pulse taking.With the support of clinical samples,an auxiliary diagnostic system for TCM pulse patterns ensures the accuracy of pulse pattern replication.
基金supported by the Natural Science Foundation of Jilin Province under Grant No. 20220101028JC。
文摘A mid-infrared femtosecond pulse laser with a single cycle and high intensity is an ideal driving light source for generating isolated attosecond pulses. Due to current experimental limitations, it is difficult to directly achieve this type of laser light source in the laboratory. In this paper, we obtain such an ideal light source by adding a Ti sapphire pulse to the combined pulse laser consisting of two mid-infrared pulses. Specifically, by combining the synthesized pulse consisting of 8 fs/1200 nm/1.62 × 10^(14)W cm^(-2)and 12 fs/1800 nm/2.71 × 10^(14)W cm^(-2)with an additional 8 fs/800 nm/1.26 × 10^(14)W cm^(-2)Ti sapphire pulse, the resulting electric field waveform is very close to that of a 1170 nm femtosecond pulse with an intensity of 1.4 × 10^(15)W cm^(-2), a single-cycle pulse width, and a carrier-envelope phase of 0.25π. Numerical simulations show that both cases produce high-order harmonic emission spectra with broadband supercontinuum spectra, however, the bandwidth of the supercontinuum spectra and the harmonic intensities in the synthesized pulses are significantly better than those in the single1170 nm pulse. After inverse Fourier transform, we obtain 66 as a high-intensity isolated attosecond pulse, whose intensity is five orders of magnitude higher than that of a monochromatic field. Here, the phase differences between three combined pulse lasers have little effect on the numerical simulation results when they vary in the range of 0.3π.
基金financially supported by the National Key Research and Development Program of China(Grant No.2022YFA1602700)the National Natural Science Foundation of China(Grant No.12274159)。
文摘Pulsed magnet technology is the only way to generate ultra-strong magnetic fields higher than 45 T so far.However,the inherently fast-changing field strength(typically on the order of 1000 T/s)poses significant challenges for spectroscopic measurements which rely on time integration of signals to improve spectral qualities.In this work,we report high-sensitivity spectroscopic measurements under pulsed high magnetic fields employing the long flat-top pulsed magnetic field technique.By means of a multiple-capacitor power supply,we were able to generate pulsed high magnetic fields with controllable flat-top pulse width and field stabilities.By synchronizing spectroscopic measurements with the waveform of the flattop magnetic field,the integration time of each spectrum can be increased by up to 100 times compared with that of the conventional spectroscopic measurements under pulsed magnetic fields,thus enabling high-sensitivity spectroscopic measurements under ultra-strong pulsed magnetic fields.These findings promise an efficient way to significantly improve the performance and extend the application of optical measurements under pulsed high magnetic fields.
基金supported by the National Natural Science Foundation of China(Nos.12205370,62204198,12305205,and 12105230)Young Talents Promotion Program of Shaanxi Provincial Science and Technology Association(No.20220514)。
文摘Doping with Ga effectively enhances the crystal quality and optical detection efficiency of zinc oxide(Zn O)single crystals,which has attracted considerable research interest in radiation detection.The application of Zn O:Ga(GZO)in nuclear energy is particularly significant and fascinating at the fundamental level,enabling neutron/gamma discrimination while preserving the response time properties of the single crystal in sub-nanoseconds,maximizing the effective counting rate of the pulsed radiation field.In this study,the single-particle waveform discrimination characteristics of GZO were evaluated for five charged particles(α,β,H^(+),Li^(+),and O^(8+)and two prevalent uncharged particles(neutrons and gamma rays).Based on the timecorrelation single-photon counting(TCSPC)method,the luminescence decay time constants of the charged particles in the GZO crystal were determined as follows:1.21 ns for H^(+),1.50 ns for Li^(+),1.70 ns for O^(8+),1.56 ns forαparticles,and 1.09 ns forβparticles.Visible differences in the excitation time spectra curves were observed.Using the conventional time-domain or frequency-domain waveform discrimination techniques,waveform discrimination of 14.9 Me V neutrons and secondary gamma rays generated by the CPNG-6 device based on GZO scintillation was successfully implemented.The neutron signal constituted 77.93%of the total,indicating that GZO exhibited superior neutron/gamma discrimination sensitivity compared with that of a commercial stilbene crystal.Using the neutron/gamma screening outcomes,we reconstructed the voltage pulse height,charge height,and neutron multiplication time spectra of the pulsed neutron radiation field.The reconstructed neutron multiplication time spectrum exhibited a deviation of less than 3%relative to the result obtained using a commercial stilbene scintillator.This is the first report in the open literature on the neutron/gamma discrimination and reconstruction of Zn O pulsed radiation-field information.
基金supported by the National Natural Science Foundation of China(No.12202011)the Youth Research fund of Shanghai Academy of Spaceflight Technology(KJW-KT-QNKYJJ-2022-25)China Postdoctoral Science Foundation(Nos.2024T170009,2022M710190).
文摘As a critical component of pulse solid rocket motors(SRMs),the soft pulse separation device(PSD)is vital in enabling multi-pulse propulsion and has become a breakthrough in SRM engineering applications.To investigate the opening performance of the PSD,an axial PSD incorporating a star-shaped prefabricated defect was designed.The opening process was simulated using peridynamics,yielding the strain field distribution and the corresponding failure mode.A single-opening verification test was conducted.The simulation results showed good agreement with the experimental data,demonstrating the reliability of the peridynamic modeling approach.Furthermore,the effects of the prefabricated defect shape and depth on the opening performance of the PSD were analyzed through simulation.The research results indicate that the established constitutive model and failure criteria based on peridynamics can reasonably predict the failure location and the opening pressure of the soft PSD.Under the impact loading,the weak zone of the soft PSD firstly ruptures,and the damaged area gradually propagates along with the prefabricated defect,eventually leading to complete separation.A smaller prefabricated defect depth or a wider prefabricated defect distribution can cause a reduction in opening pressure.These research results provide valuable guidance for the preliminary design and optimization of PSDs in pulse solid rocket motors.
基金supported by the Natural Science Foundation of Zhejiang Province,China(Grant No.Y23A040001)the National Natural Science Foundation of China(Grant Nos.12374029,12074145,and 11975012)+4 种基金the National Key Research and Development Program of China(Grant No.2019YFA0307700)the Research Foundation for Basic Research of Jilin ProvinceChina(Grant No.20220101003JC)the National College Students Innovation and Entrepreneurship Training Program(Grant No.202310350062)the Graduate Innovation Fund of Jilin University(Grant No.2024CX041)。
文摘This study examines the high-order harmonic radiation behavior of MgO crystals driven by combined pulses based on the numerical solution of the semiconductor Bloch equation.We found that compared with the monochromatic pulse,the MgO crystal can radiate a continuous harmonic spectrum with two platforms driven by the three-color combined pulse.The reason is that under the three-color combined pulse,the electron ionization and recombination can be effectively controlled within a half-optical cycle of the laser pulse.Using this continuous spectrum,we synthesized an isolated attosecond pulse with a duration of approximately 370 as.This study provides a new perspective on all-solid-state compact optical devices.
文摘We demonstrated a new type of MAX phase material,chromium titanium aluminum carbide(Cr_(2)TiAlC_(2)) polymer film,to generate a passively Q-switched erbium-doped fiber laser(EDFL).The film thickness was measured to be around 45 μm,which was fabricated using the embedding method with polyvinyl alcohol(PVA) polymer as hoster.The saturable absorber(SA) film demonstrates a dual-wavelength passively Q-switched EDFL which operates at 1 531 nm and 1 560.19 nm,respectively.The Q-switching pulse duration could be varied from 2.46 μs to 770 ns,while the repetition rate varied from 92.76 kHz to 106.6 kHz with an increasing input pumping range from 154 mW to 300 mW.The maximum output power and pulse energy of 15.05 mW and 141.18 nJ were obtained at the maximum input power of 300 mW,respectively.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174435,12034020,and 92250303)the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-091)the National Key R&D Program of China(Grant No.2022YFA1604200).
文摘Attosecond light pulses have revolutionized the study of electron dynamics in materials by enabling the observation of ultrafast processes with unprecedented attosecond temporal resolution.They are primarily generated through the process of high-order harmonic generation.This paper presents a comprehensive setup for attosecond pulse generation and measurement.Using a 900 nm,7 mJ,and 7 fs femtosecond laser with stabilized carrier-envelope phase,we employ polarization gating to generate a near single-cycle,linearly polarized pulse that interacts with neon gas to produce a broadband extreme-ultraviolet continuum with a cutoff photon energy of∼120 eV.The temporal and spectral characteristics of the generated single attosecond pulses are measured using an attosecond streak camera,and the pulse duration is determined to be 59 as through the frequency-resolved optical gating for complete reconstruction of attosecond bursts retrieval algorithm.As part of the Synergetic Extreme Condition User Facility,this setup will facilitate ultrafast research in transient absorption and photoelectron spectroscopy,providing global users with a powerful tool for studying electron dynamics in various materials.
基金supported by BMBF-Project No.05P24PF1DFG Project No.PU 213/6-3.
文摘We propose an all-optical,single-laser-pulse scheme for generating a dense relativistic strongly magnetized electron-positron pair plasma.The scheme involves the interaction of an extremely intense(I■10^(24) W/cm^(2))circularly polarized laser pulse with a solid-density target containing a conical cavity.Through full-scale three-dimensional particle-in-cell simulations that account for quantum electrodynamic effects,it is shown that this interaction results in two significant outcomes:first,the generation of quasi-static magnetic fields reaching tens of gigagauss,and,second,the production of large quantities of electron-positron pairs(up to 10^(13))via the Breit-Wheeler process.The e^(-)e^(+)plasma becomes trapped in the magnetic field and remains confined in a small volume for hundreds of femtoseconds,far exceeding the laser timescale.The dependence of pair plasma parameters,as well as the efficiency of plasma production and confinement,is discussed in relation to the properties of the laser pulse and the target.Realizing this scheme experimentally would enable the investigation of physical processes relevant to extreme astrophysical environments.
基金supported by the National Grand Instrument Project(No.2019YFF01014404)the Natural Science Foundation of China(Nos.12122501,61631001,11921006,U2241281,and 11975037)the Foundation of Science and Technology on Plasma Physics Laboratory(No.6142A04220108)。
文摘High-power laser pulses interacting with targets can generate intense electromagnetic pulses(EMPs),which can disrupt physical experimental diagnostics and even damage diagnostic equipment,posing a threat to the reliable operation of experiments.In this study,EMPs resulting from multi-petawatt laser irradiating nitrogen gas jets were systematically analyzed and investigated.The experimental results revealed that the EMP amplitude is positively correlated with the quantity and energy of the electrons captured and accelerated by the plasma channel.These factors are reflected by parameters such as laser energy and nitrogen gas jet pressure.Additionally,we propose several potential sources of EMPs produced by laser-irradiated gas jets and separately analyzed their spatiotemporal distributions.The findings provide insight into the mechanisms of EMP generation and introduce a new approach to achieve controllable EMPs by regulating the laser energy and gas jet pressure.
