期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
影响喷雾造粒Al_2O_3/nano-TiO_2复合陶瓷粉体流动特性的流变学因素研究 被引量:11
1
作者 翟长生 王俊 +2 位作者 李飞 陈海 孙宝德 《材料科学与工程学报》 CAS CSCD 北大核心 2004年第3期318-322,共5页
本文研究了分散剂、粘结剂及固相含量等流变学因素对喷雾造粒粉体流动性的影响。结果表明 ,Al2 O3 3wt.%nano TiO2 浆料具有剪切变稀的特性 ,有利于复合陶瓷粉体的喷雾造粒。当固相含量为浆料总质量的6 0 % ,分散剂和粘结剂分别为固相... 本文研究了分散剂、粘结剂及固相含量等流变学因素对喷雾造粒粉体流动性的影响。结果表明 ,Al2 O3 3wt.%nano TiO2 浆料具有剪切变稀的特性 ,有利于复合陶瓷粉体的喷雾造粒。当固相含量为浆料总质量的6 0 % ,分散剂和粘结剂分别为固相质量的 0 3%和 1 0 %时 ,浆料具有合适的粘度和最佳的分散稳定性 ,喷雾造粒所得到的粉体形状为球形或近球形 ,具有较高的松装密度和良好的流动性 ,满足用于热喷涂的需要。 展开更多
关键词 陶瓷粉体 流变学 喷雾造粒 流动性 al2o3 氧化铝 纳米氧化钛 nano-tio2
在线阅读 下载PDF
Support Effects on Thiophene Hydrodesulfurization over Co-Mo-Ni/Al_2O_3 and Co-Mo-Ni/TiO_2-Al_2O_3 Catalysts 被引量:7
2
作者 刘超 周志明 +2 位作者 黄永利 程振民 袁渭康 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第4期383-391,共9页
A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization (in moderate conditions:200 &#176;C, 12 h) of red liquor solids, a by-product of paper-making process. The prepared sulfonate... A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization (in moderate conditions:200 &#176;C, 12 h) of red liquor solids, a by-product of paper-making process. The prepared sulfonated cata-lyst (SC) had aromatic structure, composed of carbon enriched inner core, and oxygen-containing (SO3H, COOH, OH) groups enriched surface. The SO3H, COOH, OH groups amounted to 0.74 mmol·g^-1, 0.78 mmol·g^-1, 2.18 mmol·g^-1, respectively. The fresh SC showed much higher catalytic activity than that of the traditional solid acid catalysts (strong-acid 732 cation exchange resin, hydrogen type zeolite socony mobile-five (HZSM-5), sulfated zir-conia) in esterification of oleic acid. SC was deactivated during the reactions, through the mechanisms of leaching of sulfonated species and formation of sulfonate esters. Two regeneration methods were developed, and the catalytic activity can be mostly regenerated by regeneration Method 1 and be fully regenerated by regeneration Method 2, respectively. 展开更多
关键词 HYDRoDESULFURIZATIoN support hierarchically macro-/mesoporous structure al2o3 Tio2-al2o3
在线阅读 下载PDF
CO_2 methanation over TiO_2–Al_2O_3 binary oxides supported Ru catalysts 被引量:5
3
作者 Jinghua Xu Qingquan Lin +3 位作者 Xiong Su Hongmin Duan Haoran Geng Yanqiang Huang 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2016年第1期140-145,共6页
TiO_2 modified Al_2O_3 binary oxide was prepared by a wet-impregnation method and used as the support for ruthenium catalyst. The catalytic performance of Ru/TiO_2–Al_2O_3catalyst in CO_2 methanation reaction was inv... TiO_2 modified Al_2O_3 binary oxide was prepared by a wet-impregnation method and used as the support for ruthenium catalyst. The catalytic performance of Ru/TiO_2–Al_2O_3catalyst in CO_2 methanation reaction was investigated. Compared with Ru/Al_2O_3 catalyst, the Ru/TiO_2–Al_2O_3catalytic system exhibited a much higher activity in CO_2 methanation reaction. The reaction rate over Ru/TiO_2–Al_2O_3 was 0.59 mol CO_2·(g Ru)1·h-1, 3.1 times higher than that on Ru/Al_2O_3[0.19 mol CO_2·(gRu)-1·h-1]. The effect of TiO_2 content and TiO_2–Al_2O_3calcination temperature on catalytic performance was addressed. The corresponding structures of each catalyst were characterized by means of H_2-TPR, XRD, and TEM. Results indicated that the averaged particle size of the Ru on TiO_2–Al_2O_3support is 2.8 nm, smaller than that on Al_2O_3 support of 4.3 nm. Therefore, we conclude that the improved activity over Ru/TiO_2–Al_2O_3catalyst is originated from the smaller particle size of ruthenium resulting from a strong interaction between Ru and the rutile-TiO_2 support, which hindered the aggregation of Ru nanoparticles. 展开更多
关键词 Co2 methanation supported Ru catalyst Tio2al2o3 binary oxide
在线阅读 下载PDF
Combinative Hemi-pelvic prosthesis made of Ti-alloy and coated with AL_2O_3 Bioceramic
4
作者 Su Yuan Su Jin(Bejing International Aeronautical Materials Corp., Bejing, China) 《Chinese Journal of Biomedical Engineering(English Edition)》 1999年第3期11-11,共1页
关键词 al Ti combinative Hemi-pelvic prosthesis made of Ti-alloy and coated with al2o3 Bioceramic
暂未订购
Ethanol steam reforming over Ni-Cu/Al_2O_3-M_yO_z (M = Si, La, Mg,and Zn) catalysts 被引量:5
5
作者 Lifeng Zhang Jie Liu Wei Li Cuili Guo Jinli Zhang 《Journal of Natural Gas Chemistry》 EI CAS CSCD 2009年第1期55-65,共11页
Ni-based catalysts doped with copper additives were studied on their role in ethanol steam reforming reaction. The effects of Cu content, support species involving Al2O3-SIO2, Al2O3-MgO, Al2O3-ZnO, and Al2O3-La2O3, on... Ni-based catalysts doped with copper additives were studied on their role in ethanol steam reforming reaction. The effects of Cu content, support species involving Al2O3-SIO2, Al2O3-MgO, Al2O3-ZnO, and Al2O3-La2O3, on the catalytic performance were studied. Characterizations by TPR, XRD, NH3-TPD, XPS, and TGA indicated that catalysts 30Ni5Cu/Al2O3-MgO and 30Ni5Cu/Al2O3-ZnO have much higher H2 selectivity than 30Ni5Cu/Al2O3-SiO2, as well as good coke resistance. H2 selectivity for 30Ni5Cu/Al2O3-MgO catalyst was 73.3% at 450 ℃ and increased to 94.0% at 600℃, whereas for 30Ni5Cu/Al2O3-ZnO catalyst, the H2 selectivity was 63.6% at 450 ℃ and 95.2% at 600℃. TheseAl2O3-MgO and Al2O3-ZnO supported Ni-Cu bimetallic catalysts may have important applications in the production of hydrogen by ethanol steam reforming reactions. 展开更多
关键词 ethanol steam reforming nickel-copper-based catalyst al2o3-So2 support al2o3-Mgo support al2o3-Zno support al2o3-La2o3 support
在线阅读 下载PDF
Carbon dioxide reforming of methane on monolithic Ni/Al_2O_3-based catalysts 被引量:3
6
作者 S. O. Soloviev A. Yu. Kapran +1 位作者 S. N. Orlyk E. V. Gubareni 《Journal of Natural Gas Chemistry》 EI CAS CSCD 2011年第2期184-190,共7页
Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the s... Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal (Na, K) oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess. 展开更多
关键词 methane carbon dioxide reforming hydrogen SYNGAS Ni/al2o3 catalysts cordierite monolithic supports honeycomb structure sodium and potassium lanthanum oxide modifying additives
在线阅读 下载PDF
Study on Au/Al_2O_3 catalysts for low-temperature CO oxidation in situ FT-IR
7
作者 Xuhua Zou Shixue Qi +3 位作者 Jinguang Xu Zhanghuai Suo Lidun An Feng Li 《Journal of Natural Gas Chemistry》 EI CAS CSCD 2010年第3期307-312,共6页
Au/Al2O3 catalyst was prepared by a modified anion impregnation method and investigated with respect to its initial activity and stability for low-temperature CO oxidation.The activity changes of the catalyst were exa... Au/Al2O3 catalyst was prepared by a modified anion impregnation method and investigated with respect to its initial activity and stability for low-temperature CO oxidation.The activity changes of the catalyst were examined after separate treatment in CO+O2 or CO2 +O2 .Furthermore,in situ FT-IR studies were performed to investigate the species on the surface when CO or CO+O2 or CO2 +O2 was selected separately as adsorption gas.The results showed that Au/Al2O3 catalyst exhibited very high initial activity,but the catalytic activity was found to decrease gradually during CO oxidation with time on stream.And also,the activity of the catalyst declined after treatment in CO+O2 or CO2 +O2 .The formation and accumulation of carbonate-like species during CO oxidation or treatment in CO+O2 or CO2 +O2 might be mainly responsible for the activity decrease,which was reversible. 展开更多
关键词 supported gold catalyst Au/al2o3 Co oxidation catalytic activity STABILITY in situ FT-IR
在线阅读 下载PDF
Morphological characterization of Al_2O_3 membrane fabricated by sol-gel dip-coating method
8
作者 徐占锋 张良苗 +3 位作者 陈念贻 陆文聪 张振 吴祖燊 《Journal of Shanghai University(English Edition)》 CAS 2006年第6期553-557,共5页
Alumina membranes without pinholes and cracks were prepared by the sol-gel process using anunordum aluminium sulphate as the starting material. The effects of different preparing conditions on morphology characteristi... Alumina membranes without pinholes and cracks were prepared by the sol-gel process using anunordum aluminium sulphate as the starting material. The effects of different preparing conditions on morphology characteristics of the membrane were investigated by scanning electron microscopy and 3D rotational microscopy. The preparing conditions include the amounts of drying control chemical additives (DCCA), sintering procedure and sol-gel concentration. The results showed that PVA is a good crack-preventing reagent and the morphology of supported membranes was affected by ninny factors, including Al2O3 concentration, PVA/Al2O3 ratio, heating rate, membrane thickness and intrinsic defects of the substrate surface. 展开更多
关键词 supported al2o3 membrane ammonium aluminium sulphate sol-gel method morphology.
在线阅读 下载PDF
Effects of Mo on phase structure and up-conversion emissions of Er:Al_2O_3 nanocrystals 被引量:2
9
作者 LIU Dan CONG Yan 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2012年第8期1417-1421,共5页
A simple and efficient approach was presented to enhance up-conversion emissions significantly for the Er:Al2O3 nanocrystals by Mo support (Er-Mo:Al2O3) with a 976 nm laser diode excitation. Mo support had evident... A simple and efficient approach was presented to enhance up-conversion emissions significantly for the Er:Al2O3 nanocrystals by Mo support (Er-Mo:Al2O3) with a 976 nm laser diode excitation. Mo support had evident effects on the phase structure and up-conversion emissions for the Er:Al2O3 nanocrystals, which promoted the θ-(Al,Er)2O3 transformed to α-(Al,Er,Mo)203 phase, Compared with the Er:Al2O3, the maximal green and red up-conversion emissions intensities increased about 3×10^3 and 1.4×10^2 times for the Er-Mo:Al2O3 nanocrystals, respectively. It suggests that the enhancement of up-conversion emissions is caused by the high excited state energy transfer process from [4115/2, 3T2) state of the Er3+-MoO2- dimer to the 4F7/2 level of E3+. 展开更多
关键词 Er doped al2o3 up-conversion emissions Mo support sol-gel method
原文传递
成型工艺条件对铈锆铝复合载体性能的影响
10
作者 堵俊俊 刘鹏翔 +1 位作者 王靖超 高珠 《工业催化》 CAS 2019年第9期48-53,共6页
采用压缩成型法对铈锆铝复合载体进行了放大制备,考察放大制备过程中造粒粉含水量、成型压力、焙烧温度等成型工艺条件对载体机械强度、吸水量、密度、织构性质及晶相的影响。结果表明,造粒粉含水量是影响颗粒成型的主要因素,含水量过高... 采用压缩成型法对铈锆铝复合载体进行了放大制备,考察放大制备过程中造粒粉含水量、成型压力、焙烧温度等成型工艺条件对载体机械强度、吸水量、密度、织构性质及晶相的影响。结果表明,造粒粉含水量是影响颗粒成型的主要因素,含水量过高,颗粒不能成型或容易层裂;成型压力是影响载体强度、吸水量、密度等机械性能的主要影响因素,适宜的成型压力有助于获得各项机械性能均衡的载体;焙烧温度是影响载体比表面积及晶相结构的关键因素。结合生产要求确定最佳工艺条件为造粒粉含水量为15%,半成品强度(7~9)N·mm-1,焙烧温度(800~900)℃。 展开更多
关键词 催化剂工程 铈锆铝复合载体 压缩成型 含水量 成型压力 焙烧温度
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部