The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materia...The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materials,which have been utilized in lithium ion batteries with enhanced energy and power density,high energy efficiency,superior rate capability and excellent cycling stability resulting from the doping,surface coating,nanocomposites and nano-architecturing.展开更多
The rapid evolution of laser micro/nano-manufacturing techniques has transformed precision manufacturing,enabling the creation of complex micro/nano-structures.These techniques are crucial for multiple industries,incl...The rapid evolution of laser micro/nano-manufacturing techniques has transformed precision manufacturing,enabling the creation of complex micro/nano-structures.These techniques are crucial for multiple industries,including electronics,photonics,and biomedical engineering,owing to their unmatched precision and versatility.The ability to manipulate materials at such scales has unlocked new possibilities for innovation,thereby facilitating the development of advanced components and devices with enhanced performance and functionalities.展开更多
Developing efficient electrocatalysts for oxygen evolution reaction(OER)is imperative to enhance the overall efficiency of electrolysis systems and rechargeable metal-air batteries operating in aqueous solutions.High-...Developing efficient electrocatalysts for oxygen evolution reaction(OER)is imperative to enhance the overall efficiency of electrolysis systems and rechargeable metal-air batteries operating in aqueous solutions.High-entropy materials,featured with their distinctive multi-component properties,have found extensive application as catalysts in electrochemical energy storage and conversion devices.However,synthesizing nanostructured high-entropy compounds under mild conditions poses a significant challenge due to the difficulty in overcoming the immiscibility of multiple metallic constituents.In this context,the current study focuses on the synthesis of an array of nano-sized high entropy sulfides tailored for OER via a facile precursor pyrolysis method at low temperature.The representative compound,Fe Co Ni Cu Mn Sx,demonstrates remarkable OER performance,achieving a current density of 10 m A/cm^(2) at an overpotential of merely 220 m V and excellent stability with constant electrolysis at 100 m A/cm^(2) for over 400 h.The in-situ formed metal(oxy)hydroxide has been confirmed as the real active sites and its exceptional performance can be primarily attributed to the synergistic effects arising from its multiple components.Furthermore,the synthetic methodology presented here is versatile and can be extended to the preparation of high entropy phosphides,which also present favorable OER performance.This research not only introduces promising non-noble electrocatalysts for OER but also offers a facile approach to expand the family of nano high-entropy materials,contributing significantly to the field of electrochemical energy conversion.展开更多
Micro/nano hierarchical structures could endow materials with various surface functions.However,the multilayer and multiscale characteristics of micro/nano hierarchical structures bring difficulties for their one step...Micro/nano hierarchical structures could endow materials with various surface functions.However,the multilayer and multiscale characteristics of micro/nano hierarchical structures bring difficulties for their one step and controllable fabrication.Accordingly,based on tip-based fabrication techniques,this study proposed a micro-amplitude vibration-assisted scratching method by introducing a periodic backward displacement into the conventional scratching process,which enabled the synchronous creation of the microscale V-groove and nanoscale ripples,i.e.a typical micro/nano hierarchical structure.The experiments and finite element modeling were employed to explore the formation process and mechanism of the micro/nano hierarchical structures.Being different from conventional cutting,this method was mainly based on the plow mechanism,and it could accurately replicate the shape of the indenter on the material surface.The microscale V-groove was formed due to the scratching action,and the nanoscale ripple was formed due to the extrusion action of the indenter on the microscale V-groove’s surface.Furthermore,the relationships between the processing parameters and the dimensions of the micro/nano hierarchical structures were established through experiments,and optimized processing parameters were determined to achieve regular micro/nano hierarchical structures.By this method,complex patterns constructed by various micro/nano hierarchical structures were fabricated on both flat and curved surfaces,achieving diverse surface structural colors.展开更多
In this special issue, we invited a few leading materials researchers to present topics in thin films, coatings, and nano structures. Readers will find most recent developments in topics, including recent advances in ...In this special issue, we invited a few leading materials researchers to present topics in thin films, coatings, and nano structures. Readers will find most recent developments in topics, including recent advances in hard, tough, and low friction nanocomposite coatings; thin films for coating nanomaterials; electroless plating of silver thin films on porous Al2O3 substrate; CrN/Nano Cr interlayer coatings; nano-structured carbide derived carbon （CDC） films and their tribology; predicting interdiffusion in high-temperature coatings; gallium-catalyzed silica nanowire growth; and corrosion protection properties of organofunctional silanes. Authors are from both national laboratories and academia.展开更多
Controllable fabrication of surface micro/nano structures is the key to realizing surface functionalization for various applications.As a versatile approach,ultrafast laser ablation has been widely studied for surface...Controllable fabrication of surface micro/nano structures is the key to realizing surface functionalization for various applications.As a versatile approach,ultrafast laser ablation has been widely studied for surface micro/nano structuring.Increasing research eforts in this feld have been devoted to gaining more control over the fabrication processes to meet the increasing need for creation of complex structures.In this paper,we focus on the in-situ deposition process following the plasma formation under ultrafast laser ablation.From an overview perspective,we frstly summarize the diferent roles that plasma plumes,from pulsed laser ablation of solids,play in diferent laser processing approaches.Then,the distinctive in-situ deposition process within surface micro/nano structuring is highlighted.Our experimental work demonstrated that the in-situ deposition during ultrafast laser surface structuring can be controlled as a localized micro-additive process to pile up secondary ordered structures,through which a unique kind of hierarchical structure with fort-like bodies sitting on top of micro cone arrays were fabricated as a showcase.The revealed laser-matter interaction mechanism can be inspiring for the development of new ultrafast laser fabrication approaches,adding a new dimension and more fexibility in controlling the fabrication of functional surface micro/nano structures.展开更多
A graphene nanoribbon （GNR） has two basic configurations when winding on the outer surface of a carbon nanotube （CNT）： helix and scroll. Here the transformation between the two configurations is studied utilizing...A graphene nanoribbon （GNR） has two basic configurations when winding on the outer surface of a carbon nanotube （CNT）： helix and scroll. Here the transformation between the two configurations is studied utilizing molecular dynamics simulations. The energy barrier during the transformation as well as its relationship with the interfacial energy and the radius of CNT are investigated. Our work offers further insights into the formation of desirable helix/scroll of GNR winding on nanotubes or nanowires, and thus can enable novel design of potential graphene-based electronics.展开更多
In order to enhance electrochemical properties of LiFePO4 （LFP） cathode materials, spherical porous nano/micro structured LFP/C cathode materials were synthesized by spray drying, followed by calcination. The result...In order to enhance electrochemical properties of LiFePO4 （LFP） cathode materials, spherical porous nano/micro structured LFP/C cathode materials were synthesized by spray drying, followed by calcination. The results show that the spherical precursors with the sizes of 0.5-5 μm can be completely converted to LFP/C when the calcination temperature is higher than 500 ℃. The LFP/C microspheres obtained at calcination temperature of 700 ℃ are composed of numerous particles with sizes of -20 nm, and have well-developed interconnected pore structure and large specific surface area of 28.77 mE/g. The specific discharge capacities of the LFP/C obtained at 700 ℃ are 162.43, 154.35 and 144.03 mA.h/g at 0.5C, 1C and 2C, respectively. Meanwhile, the capacity retentions can reach up to 100% after 50 cycles. The improved electrochemical properties of the materials are ascribed to a small Li＋ diffusion resistance and special structure of LFP/C microspheres.展开更多
In order to improve the osseointegration and antibacterial activity of titanium alloys,micro/nano-structured ceramic coatings doped with antibacterial element F were prepared by plasma electrolytic oxidation(PEO)proce...In order to improve the osseointegration and antibacterial activity of titanium alloys,micro/nano-structured ceramic coatings doped with antibacterial element F were prepared by plasma electrolytic oxidation(PEO)process on Ti6Al4V alloy in NaF electrolyte.The influence of NaF concentration(0.15-0.50 mol/L)on the PEO process,microstructure,phase composition,corrosion resistance and thickness of the coatings was investigated using scanning/transmission electron microscopy,energy dispersive spectroscopy,atomic force microscopy,X-ray diffractometer,and potentiodynamic polarization.The results demonstrated that Ti6Al4V alloy had low PEO voltage(less than 200 V)in NaF electrolyte,which decreased further as the NaF concentration increased.A micro/nano-structured coating with 10-15μm pits and 200-800 nm pores was formed in NaF electrolyte;the morphology was different from the typical pancake structure obtained with other electrolytes.The coating formed in NaF electrolyte had low surface roughness and was thin(<4μm).The NaF concentration had a small effect on the phase transition from metastable anatase phase to stable rutile phase,but greatly affected the corrosion resistance.In general,as the NaF concentration increased,the surface roughness,phase(anatase and rutile)contents,corrosion resistance,and thickness of the coating first increased and then decreased,reaching the maximum values at 0.25 mol/L NaF.展开更多
PrrOll nanoparticles were obtained by subsequent thermal decomposition of the as-prepared precipitate formed under ambient temperature and pressure using NaOH as precipitant. The calcination process was affected, for ...PrrOll nanoparticles were obtained by subsequent thermal decomposition of the as-prepared precipitate formed under ambient temperature and pressure using NaOH as precipitant. The calcination process was affected, for 1 h in static air atmosphere, at 400-700 ℃ temperature range. The different samples were characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM）, field emission scanning electron microscopy （FE-SEM）, thermogravimetric analysis （TGA）, in situ electrical conductivity, and N2 adsorption/desorption. The obtained results demonstrated that nano-crystalline Pr6O11, with crystallites size of 6-12 nm, started to form at 500 ℃. Such value increased to 20-33 nm for the sample calcined at 700℃. The as-synthesized PrrOll nanoparticles presented high electrical conductivity due to electron hopping between Pr（III）-Pr（IV） pairs.展开更多
Condensation is an important regime of heat transfer which has wide applications in different industries such as power plants,heating,ventilating and air conditioning,and refrigeration.Condensation occurs in two diffe...Condensation is an important regime of heat transfer which has wide applications in different industries such as power plants,heating,ventilating and air conditioning,and refrigeration.Condensation occurs in two different modes including filmwise (FWC) and dropwise (DWC) condensation.DWC occurring on hydrophobic and superhydrophobic surfaces has a much higher heat transfer capacity than FWC.Therefore,wide investigations have been done to produce DWC in recent years.Superhydrophobic surfaces have micro/nano structures with low surface energy.In this study,a two-step electrodeposition process is used to produce micro/nano structures on copper specimens.The surface energy of specimens is reduced by a self-assembled monolayer using ethanol and 1-octadecanethiol solution.The results show that there is an optimum condition for electrodeposition parameters.For example,a surface prepared by 2000 s step time has 5 times greater heat transfer than FWC while a surface with 4000 s step time has nearly the same heat transfer as FWC.The surfaces of the fabricated specimens are examined using XRD and SEM analyses.The SEM analyses of the surfaces show that there are some micro-structures on the surfaces and the surface porosities are reduced by increasing the second step electrodeposition time.展开更多
Structural strengthening of the nano porous silica films has been reported. The films were prepared with a base/acid two-step catalyzed TEOS-based sol-gel processing and dip-coating, and then baked in the mixed gas of...Structural strengthening of the nano porous silica films has been reported. The films were prepared with a base/acid two-step catalyzed TEOS-based sol-gel processing and dip-coating, and then baked in the mixed gas of ammonia and water vapor. The silica films were characterized with TEM, AFM, FTIR, spectrophotometer, ellipsometer, and abrasion test, respectively. The experimental results have shown that the films have a nanostructure with a low refractive index and can form an excellent scratch-resistant broadband anti-reflectance. The two-step catalysis noticeably strengthens the films, and the mixed gas treatment further improves mechanical strength of the silica network. Finally the strengthening mechanism has been discussed.展开更多
Production of nano/ultrafine grains through deformation-induced martensite formation and its reversion to austenite in an AISI 321 stainless steel was studied. The repetitive cold rolling and subsequent annealing were...Production of nano/ultrafine grains through deformation-induced martensite formation and its reversion to austenite in an AISI 321 stainless steel was studied. The repetitive cold rolling and subsequent annealing were conducted to obtain nanocrystalline structure. Heavy cold rolling （90% reduction） at ＋20 and -20 ℃ was carded out to induce the formation of α′-martensite from metastable austenitic material. The process was followed by annealing treatment at 700-900 ℃ for 0.5-30 min. Effects of process parameters, i.e., ＂reduction percentage,＂ ＂rolling temperature,＂ ＂annealing temperature＂ and ＂annealing time＂, on the microstructural development were considered. Microstructural evolutions were conducted using feritscope, X-ray diffractometer and scanning electron microscope. Hardness of the specimens was measured by Vickers method. Results revealed that the higher thickness reduction and lower rolling temperature provided more martensite volume fraction and further hardness. X-ray diffraction patterns and feritoscopic results indicated that saturated strain （εs） was reduced from 2.3 to 0.9 when temperature declined from ＋20 to -20 ℃. The smallest grain size （about 70 nm） was achieved in the condition of cold rolling at -20℃followed by annealing at 750 ℃for 5 min.展开更多
304 austenitic stainless steel was cold rolled in the range of 20%-80%reductions and then annealed at 700-900°C for 60 sto obtain nano/ultrafine-grained（NG/UFG）structure.Transmission electron microscopy,electro...304 austenitic stainless steel was cold rolled in the range of 20%-80%reductions and then annealed at 700-900°C for 60 sto obtain nano/ultrafine-grained（NG/UFG）structure.Transmission electron microscopy,electron backscatter diffraction and X-ray diffraction were used to characterize the resulting microstructures.The results showed that with the increase of cold reduction,the content of martensite was increased.The steel performed work hardening during cold-working owing to the occurrence of strain induced martensite which nucleated in single shear bands.Further rolling broke up the lath-type martensite into dislocation-cell type martensite because of the formation of slip bands.Samples annealed at 800-960°C for 60 swere of NG/UFG structure with different percentage of nanocrystalline（60-100 nm）and ultrafine（100-500 nm）grains,submicron size（500-1000 nm）grains and micron size（〉1000 nm）grains.The value of the Gibbs free energy exhibited that the reversion mechanism of the reversion process was shear controlled by the annealing temperature.For a certain annealing time during the reversion process,austenite nucleated first on dislocation-cell type martensite and the grains grew up subsequently and eventually to be micrometer/submicrometer grains,while the nucleation of austenite on lath-type martensite occurred later resulting in nanocrystalline/ultrafine grains.The existence of the NG/UFG structure led to a higher strength and toughness during tensile test.展开更多
ZnO micro/nano complex structure films, including reticulate papillary nodes, petal-like and flake-hole, have been self-assembled by a hydrothermal technique at different temperatures without metal catalysts. The wett...ZnO micro/nano complex structure films, including reticulate papillary nodes, petal-like and flake-hole, have been self-assembled by a hydrothermal technique at different temperatures without metal catalysts. The wettability of the above film surfaces was modified with a simple coating of heptadecafluorodecyltrimethoxy-silane in toluene. After modifying, the surface of ZnO film grown at 50℃ was converted from superhydrophilic with a water contact angle lower than 5° to superhydrophobic with a water contact angle of 165° Additionally, the surface of reticulate papillary nodes ZnO film grown at 100 ℃ had excellent superhydrophobicity, with a water contact angle of 173° and a sliding angle lower than 2° Furthermore, the water contact angle on the surface of petal-like and flake-hole ZnO films grown at 150℃ and 200℃ were found to be 140° and 120°, respectively. The wettability for the samples was found to depend strongly on the surface morphology which results from the growth temperature.展开更多
Preparing SnO2 with hierarchical micro/nano structures by hydrothermal, coordination, templating and electrochemical deposition methods and their mechanisms are investigated. The result shows that the echinus-like SnO...Preparing SnO2 with hierarchical micro/nano structures by hydrothermal, coordination, templating and electrochemical deposition methods and their mechanisms are investigated. The result shows that the echinus-like SnO2 prepared by Method 1 is a typical Ostwald mechanism that develops from internally to externally. The cabbage-like SnO2 by Method 2 is produced with oxalic acid as complexing agent to set-up precursor of SnO2, and then precursors are bocked around the body that is around the body being bocked. The nest-like SnO2 by Method 3 is controlled by citric acid as coordinator for the nucleation as well as the grow rate and setup process. Spongy-like SnO2 by Method 4 is produced using PST as template, PST is be infiltered into SnO2 precursor by gravity and capillary and treated thermally to form a multiporous structure. The petal-like SnO2 by Method 5 is formed with crystal deposition emergence due to oxidation-reduction reactions of two electrodes in an electric field. XRD analyses shows that the five results are all pure phase SnO2. It provides basic data for SnOE industrial application.展开更多
The hydrophobic films of TixOy-CmHn. deposited from mixture gases of titanium isopropoxide （TTIP） and oxygen by plasma enhanced chemical vapor deposition （PECVD） were investigated. The films were investigated by s...The hydrophobic films of TixOy-CmHn. deposited from mixture gases of titanium isopropoxide （TTIP） and oxygen by plasma enhanced chemical vapor deposition （PECVD） were investigated. The films were investigated by scanning electron microscope （ SEM ）, transmission electron microscope （ TEM ）, Fourier transform infrared spectrometer （ FTIR）, X-Ray diffraction （ XRD ）, element analysis （ EA ）, ultraviolet visible spectrometer （ UV-Vis）, and water contact angle （WCA）. The results reveal that the surface of the films is formed by mierosized papillaes aggregated by inorganic and organic phases of complex nanoparticles with size from 50 nm to 200 nm when the discharge power is increased from 40 W to 150 W. All fdms demonstrate the strong broad of Ti-O-Ti stretching vibration at 400 -800cm-1, -CH bending vibration at 1 388 cm -1, and broadening -OH stretching vibration at 3 000-3500 cm-1 With the increase of the discharge power, the asdeposited film changes from amorphous to crystallization. The WCA of the film can be as high as 160°, indicating the hydrophobicity. The films show a similar ultraviolet absorption property as the bulk TiO2 film. The composition of the composition of film deposited at 150 W can be formulated as Tio.302-C1.5H3. Therefore, the composition formula of this hydrophobic film could be expressed as TiO2-C5H10O4.7. It is believed that the complex micro/nano structures of TiO2 and C5H10O4.7 residues are responsible for the observed hydrophobicity and the ultraviolet absorption property of the film.展开更多
The work describes the properties of soluble organic silicates and their applications to obtain nanocomposite materials. We analyzed the properties of the water-soluble high-modulus silicate systems and their technolo...The work describes the properties of soluble organic silicates and their applications to obtain nanocomposite materials. We analyzed the properties of the water-soluble high-modulus silicate systems and their technology for producing. The aim of this paper is the comparison properties of binders based on liquid glass containing strong organic bases silicates. We have shown how these systems are transformed from lower to higher oligomers through the formation of the silica sol and the implementation of the sol-gel process for these oligomers. We have conducted advanced research of various aspects of the use of these materials as the binder. Advantages of strong organic bases silicates in the preparation of heat resistant, nanocomposite materials are shown. Ways to obtaining quaternary ammonium silicates and their use to produce nanocomposites are proposed. Products obtained in this way can be used as a binder in the preparation of nanostruetured composite materials, water-based paints, coatings, etc. Modifiers have been proposed for making of hybrid nanostructured composite materials by a sol-gel process. There have been shown of structuring phenomena some aspects, synthesis and application of hybrid materials based on silica with grafted polymers. It has been shown, the possibility of modifying compositions using the nanostructuring agents such as tetrafurfuryloxysilane. This paper also describes methods for the synthesis of products for modifying a sol-gel process using organic soluble silicates. We are displaying their use for the production of new nanocomposite materials and coatings for protection against various external factors.展开更多
A global net sum equilibrium in heat exchange is a fact and thus a global climate change doesn’t exist, but climate shifts in climate cells, especially in the northern temperate cell, do. The global climate has been ...A global net sum equilibrium in heat exchange is a fact and thus a global climate change doesn’t exist, but climate shifts in climate cells, especially in the northern temperate cell, do. The global climate has been ever since homeostatic, and has recuperated far huger climate impacts in the past. Current climate models need a drastically revision on the focus of carbon dioxide as main driver. Carbon dioxide and other carbon gasses do influence albedo patterns, but provide globally a homeostatic effect with a commonly accepted increase impact of 0.3 degrees Celsius. Carbon dioxide does not trigger the climate shifts, but is an indicator of exhaust of combustion processes that emit very small particles which drive these climate shifts. They are the fine dust and nano structured particles that cause the shifts of the climate in cells, as demonstrated in this article and results i.e. in more thunder and lightning, extreme weather, distinct droughts and precipitation patterns. The causes underlying these shifts are nano structured particles in the upper troposphere and lower stratosphere, especially largely produced and remain in the temperate climate northern hemisphere cell and get dispersed by jet streams and low and high pressure areas. However, because of electrical charge, caused by friction or due to anthropogenic negatively charged nano structured particle, emissions will travel up to the lower stratosphere and become neutralized at the electro sphere level, and they do also have a tendency to move to the Arctic. The southern hemisphere climate faces limited anthropogenic emissions, because only 10 percent of the world population can contribute with less pollutant providing activities, and hasn’t changed, but that could well be because it is equally influenced and driven, like the northern hemisphere, by the variation of sun activity in diverse cycles. The present problem is that we produce huge amounts of air borne nano structured particles from combustion processes that never exist before. The only nano particles known in nature are those who are limited produced from volcano eruptions and natural forest fires. The natural feedback systems that moderate climate shifts and influence global climate are: convection by cumulonimbus clouds, sea currents and vegetation adaptation. A novel ultra-fine dust electric reduction device (UFDRS-System), created by the author, diminishs to a size of less than 10 nano particles in diameter and thus prevents major electrical drift of nano structured particulates in the upper troposphere and lower stratosphere and contributes largely in purifying the air and thus reduces the effects of climate shifts. Like solving the acid rain problems with sulphuric acid reduction and ozone depletion with CFCs proscription in the past, the present climate shifts can be mitigated via a reduction of the anthropogenic nano structured particulates in the atmosphere. The UFDRS-System together with the given nature’s solutions can re-balance our atmosphere in a period of two years or a little bit longer due to extension of the lifespan of a particle in the stratosphere.展开更多
基金Projects(51134007,21003161,21250110060) supported by the National Natural Science Foundation of ChinaProject(11MX10) supported by Central South University Annual Mittal-Founded Innovation ProjectProject(2011ssxt086) supported by Fundamental Research Funds for the Central Universities,China
文摘The recent advancement in the design,synthesis,and fabrication of micro/nano structured LiNixCoyMnzO2 with one-,two-,and three-dimensional morphologies was reviewed.The major goal is to highlight LiNixCoyMnzO2 materials,which have been utilized in lithium ion batteries with enhanced energy and power density,high energy efficiency,superior rate capability and excellent cycling stability resulting from the doping,surface coating,nanocomposites and nano-architecturing.
文摘The rapid evolution of laser micro/nano-manufacturing techniques has transformed precision manufacturing,enabling the creation of complex micro/nano-structures.These techniques are crucial for multiple industries,including electronics,photonics,and biomedical engineering,owing to their unmatched precision and versatility.The ability to manipulate materials at such scales has unlocked new possibilities for innovation,thereby facilitating the development of advanced components and devices with enhanced performance and functionalities.
基金financially supported by the National Natural Science Foundation of China(Nos.22209183,22225902,U22A20436)the Advanced Talents of Jiangsu University,China(No.23JDG027)。
文摘Developing efficient electrocatalysts for oxygen evolution reaction(OER)is imperative to enhance the overall efficiency of electrolysis systems and rechargeable metal-air batteries operating in aqueous solutions.High-entropy materials,featured with their distinctive multi-component properties,have found extensive application as catalysts in electrochemical energy storage and conversion devices.However,synthesizing nanostructured high-entropy compounds under mild conditions poses a significant challenge due to the difficulty in overcoming the immiscibility of multiple metallic constituents.In this context,the current study focuses on the synthesis of an array of nano-sized high entropy sulfides tailored for OER via a facile precursor pyrolysis method at low temperature.The representative compound,Fe Co Ni Cu Mn Sx,demonstrates remarkable OER performance,achieving a current density of 10 m A/cm^(2) at an overpotential of merely 220 m V and excellent stability with constant electrolysis at 100 m A/cm^(2) for over 400 h.The in-situ formed metal(oxy)hydroxide has been confirmed as the real active sites and its exceptional performance can be primarily attributed to the synergistic effects arising from its multiple components.Furthermore,the synthetic methodology presented here is versatile and can be extended to the preparation of high entropy phosphides,which also present favorable OER performance.This research not only introduces promising non-noble electrocatalysts for OER but also offers a facile approach to expand the family of nano high-entropy materials,contributing significantly to the field of electrochemical energy conversion.
基金supported by the Jilin Province Key Research and Development Plan Project(20240302066GX)the National Natural Science Foundation of China(Grant No.52075221)the Fundamental Research Funds for the Central Universities(2023-JCXK-02)。
文摘Micro/nano hierarchical structures could endow materials with various surface functions.However,the multilayer and multiscale characteristics of micro/nano hierarchical structures bring difficulties for their one step and controllable fabrication.Accordingly,based on tip-based fabrication techniques,this study proposed a micro-amplitude vibration-assisted scratching method by introducing a periodic backward displacement into the conventional scratching process,which enabled the synchronous creation of the microscale V-groove and nanoscale ripples,i.e.a typical micro/nano hierarchical structure.The experiments and finite element modeling were employed to explore the formation process and mechanism of the micro/nano hierarchical structures.Being different from conventional cutting,this method was mainly based on the plow mechanism,and it could accurately replicate the shape of the indenter on the material surface.The microscale V-groove was formed due to the scratching action,and the nanoscale ripple was formed due to the extrusion action of the indenter on the microscale V-groove’s surface.Furthermore,the relationships between the processing parameters and the dimensions of the micro/nano hierarchical structures were established through experiments,and optimized processing parameters were determined to achieve regular micro/nano hierarchical structures.By this method,complex patterns constructed by various micro/nano hierarchical structures were fabricated on both flat and curved surfaces,achieving diverse surface structural colors.
文摘In this special issue, we invited a few leading materials researchers to present topics in thin films, coatings, and nano structures. Readers will find most recent developments in topics, including recent advances in hard, tough, and low friction nanocomposite coatings; thin films for coating nanomaterials; electroless plating of silver thin films on porous Al2O3 substrate; CrN/Nano Cr interlayer coatings; nano-structured carbide derived carbon （CDC） films and their tribology; predicting interdiffusion in high-temperature coatings; gallium-catalyzed silica nanowire growth; and corrosion protection properties of organofunctional silanes. Authors are from both national laboratories and academia.
基金support by the National Key Research and Development Program of China(No.2017YFB1104300)the National Natural Science Foundation of China(Nos.51575309 and 51210009)the Tsinghua University Initiative Scientifc Research Program(No.2018Z05JZY009).
文摘Controllable fabrication of surface micro/nano structures is the key to realizing surface functionalization for various applications.As a versatile approach,ultrafast laser ablation has been widely studied for surface micro/nano structuring.Increasing research eforts in this feld have been devoted to gaining more control over the fabrication processes to meet the increasing need for creation of complex structures.In this paper,we focus on the in-situ deposition process following the plasma formation under ultrafast laser ablation.From an overview perspective,we frstly summarize the diferent roles that plasma plumes,from pulsed laser ablation of solids,play in diferent laser processing approaches.Then,the distinctive in-situ deposition process within surface micro/nano structuring is highlighted.Our experimental work demonstrated that the in-situ deposition during ultrafast laser surface structuring can be controlled as a localized micro-additive process to pile up secondary ordered structures,through which a unique kind of hierarchical structure with fort-like bodies sitting on top of micro cone arrays were fabricated as a showcase.The revealed laser-matter interaction mechanism can be inspiring for the development of new ultrafast laser fabrication approaches,adding a new dimension and more fexibility in controlling the fabrication of functional surface micro/nano structures.
基金supported by the National Natural Science Foundation of China(NSFC)(11272327 and 11023001)mainly supported by the Supercomputing Center of Chinese Academy of Sciences(SCCAS)
文摘A graphene nanoribbon （GNR） has two basic configurations when winding on the outer surface of a carbon nanotube （CNT）： helix and scroll. Here the transformation between the two configurations is studied utilizing molecular dynamics simulations. The energy barrier during the transformation as well as its relationship with the interfacial energy and the radius of CNT are investigated. Our work offers further insights into the formation of desirable helix/scroll of GNR winding on nanotubes or nanowires, and thus can enable novel design of potential graphene-based electronics.
基金Project(2013AA050901)supported by the National High-tech Research and Development Program of China
文摘In order to enhance electrochemical properties of LiFePO4 （LFP） cathode materials, spherical porous nano/micro structured LFP/C cathode materials were synthesized by spray drying, followed by calcination. The results show that the spherical precursors with the sizes of 0.5-5 μm can be completely converted to LFP/C when the calcination temperature is higher than 500 ℃. The LFP/C microspheres obtained at calcination temperature of 700 ℃ are composed of numerous particles with sizes of -20 nm, and have well-developed interconnected pore structure and large specific surface area of 28.77 mE/g. The specific discharge capacities of the LFP/C obtained at 700 ℃ are 162.43, 154.35 and 144.03 mA.h/g at 0.5C, 1C and 2C, respectively. Meanwhile, the capacity retentions can reach up to 100% after 50 cycles. The improved electrochemical properties of the materials are ascribed to a small Li＋ diffusion resistance and special structure of LFP/C microspheres.
文摘In order to improve the osseointegration and antibacterial activity of titanium alloys,micro/nano-structured ceramic coatings doped with antibacterial element F were prepared by plasma electrolytic oxidation(PEO)process on Ti6Al4V alloy in NaF electrolyte.The influence of NaF concentration(0.15-0.50 mol/L)on the PEO process,microstructure,phase composition,corrosion resistance and thickness of the coatings was investigated using scanning/transmission electron microscopy,energy dispersive spectroscopy,atomic force microscopy,X-ray diffractometer,and potentiodynamic polarization.The results demonstrated that Ti6Al4V alloy had low PEO voltage(less than 200 V)in NaF electrolyte,which decreased further as the NaF concentration increased.A micro/nano-structured coating with 10-15μm pits and 200-800 nm pores was formed in NaF electrolyte;the morphology was different from the typical pancake structure obtained with other electrolytes.The coating formed in NaF electrolyte had low surface roughness and was thin(<4μm).The NaF concentration had a small effect on the phase transition from metastable anatase phase to stable rutile phase,but greatly affected the corrosion resistance.In general,as the NaF concentration increased,the surface roughness,phase(anatase and rutile)contents,corrosion resistance,and thickness of the coating first increased and then decreased,reaching the maximum values at 0.25 mol/L NaF.
文摘PrrOll nanoparticles were obtained by subsequent thermal decomposition of the as-prepared precipitate formed under ambient temperature and pressure using NaOH as precipitant. The calcination process was affected, for 1 h in static air atmosphere, at 400-700 ℃ temperature range. The different samples were characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM）, field emission scanning electron microscopy （FE-SEM）, thermogravimetric analysis （TGA）, in situ electrical conductivity, and N2 adsorption/desorption. The obtained results demonstrated that nano-crystalline Pr6O11, with crystallites size of 6-12 nm, started to form at 500 ℃. Such value increased to 20-33 nm for the sample calcined at 700℃. The as-synthesized PrrOll nanoparticles presented high electrical conductivity due to electron hopping between Pr（III）-Pr（IV） pairs.
文摘Condensation is an important regime of heat transfer which has wide applications in different industries such as power plants,heating,ventilating and air conditioning,and refrigeration.Condensation occurs in two different modes including filmwise (FWC) and dropwise (DWC) condensation.DWC occurring on hydrophobic and superhydrophobic surfaces has a much higher heat transfer capacity than FWC.Therefore,wide investigations have been done to produce DWC in recent years.Superhydrophobic surfaces have micro/nano structures with low surface energy.In this study,a two-step electrodeposition process is used to produce micro/nano structures on copper specimens.The surface energy of specimens is reduced by a self-assembled monolayer using ethanol and 1-octadecanethiol solution.The results show that there is an optimum condition for electrodeposition parameters.For example,a surface prepared by 2000 s step time has 5 times greater heat transfer than FWC while a surface with 4000 s step time has nearly the same heat transfer as FWC.The surfaces of the fabricated specimens are examined using XRD and SEM analyses.The SEM analyses of the surfaces show that there are some micro-structures on the surfaces and the surface porosities are reduced by increasing the second step electrodeposition time.
基金the National Natural Science Foundation of China(No:69978017,20133040)Shanghai Key Subject Programme,Chinese Foundation of High Technology(2002AA842052)Shanghai Natural Science Foundation(02ZE14101)as well as Shanghai Nanotechnology Promotion Center(0159um039).
文摘Structural strengthening of the nano porous silica films has been reported. The films were prepared with a base/acid two-step catalyzed TEOS-based sol-gel processing and dip-coating, and then baked in the mixed gas of ammonia and water vapor. The silica films were characterized with TEM, AFM, FTIR, spectrophotometer, ellipsometer, and abrasion test, respectively. The experimental results have shown that the films have a nanostructure with a low refractive index and can form an excellent scratch-resistant broadband anti-reflectance. The two-step catalysis noticeably strengthens the films, and the mixed gas treatment further improves mechanical strength of the silica network. Finally the strengthening mechanism has been discussed.
文摘Production of nano/ultrafine grains through deformation-induced martensite formation and its reversion to austenite in an AISI 321 stainless steel was studied. The repetitive cold rolling and subsequent annealing were conducted to obtain nanocrystalline structure. Heavy cold rolling （90% reduction） at ＋20 and -20 ℃ was carded out to induce the formation of α′-martensite from metastable austenitic material. The process was followed by annealing treatment at 700-900 ℃ for 0.5-30 min. Effects of process parameters, i.e., ＂reduction percentage,＂ ＂rolling temperature,＂ ＂annealing temperature＂ and ＂annealing time＂, on the microstructural development were considered. Microstructural evolutions were conducted using feritscope, X-ray diffractometer and scanning electron microscope. Hardness of the specimens was measured by Vickers method. Results revealed that the higher thickness reduction and lower rolling temperature provided more martensite volume fraction and further hardness. X-ray diffraction patterns and feritoscopic results indicated that saturated strain （εs） was reduced from 2.3 to 0.9 when temperature declined from ＋20 to -20 ℃. The smallest grain size （about 70 nm） was achieved in the condition of cold rolling at -20℃followed by annealing at 750 ℃for 5 min.
基金supported by the National Natural Science Foundation of China(Grant No.51474031)
文摘304 austenitic stainless steel was cold rolled in the range of 20%-80%reductions and then annealed at 700-900°C for 60 sto obtain nano/ultrafine-grained（NG/UFG）structure.Transmission electron microscopy,electron backscatter diffraction and X-ray diffraction were used to characterize the resulting microstructures.The results showed that with the increase of cold reduction,the content of martensite was increased.The steel performed work hardening during cold-working owing to the occurrence of strain induced martensite which nucleated in single shear bands.Further rolling broke up the lath-type martensite into dislocation-cell type martensite because of the formation of slip bands.Samples annealed at 800-960°C for 60 swere of NG/UFG structure with different percentage of nanocrystalline（60-100 nm）and ultrafine（100-500 nm）grains,submicron size（500-1000 nm）grains and micron size（〉1000 nm）grains.The value of the Gibbs free energy exhibited that the reversion mechanism of the reversion process was shear controlled by the annealing temperature.For a certain annealing time during the reversion process,austenite nucleated first on dislocation-cell type martensite and the grains grew up subsequently and eventually to be micrometer/submicrometer grains,while the nucleation of austenite on lath-type martensite occurred later resulting in nanocrystalline/ultrafine grains.The existence of the NG/UFG structure led to a higher strength and toughness during tensile test.
基金Project supported by the 973 Program of China (Grant No. 2006CB302900)National Natural Science Foundation of China(Grant No. 50872129)
文摘ZnO micro/nano complex structure films, including reticulate papillary nodes, petal-like and flake-hole, have been self-assembled by a hydrothermal technique at different temperatures without metal catalysts. The wettability of the above film surfaces was modified with a simple coating of heptadecafluorodecyltrimethoxy-silane in toluene. After modifying, the surface of ZnO film grown at 50℃ was converted from superhydrophilic with a water contact angle lower than 5° to superhydrophobic with a water contact angle of 165° Additionally, the surface of reticulate papillary nodes ZnO film grown at 100 ℃ had excellent superhydrophobicity, with a water contact angle of 173° and a sliding angle lower than 2° Furthermore, the water contact angle on the surface of petal-like and flake-hole ZnO films grown at 150℃ and 200℃ were found to be 140° and 120°, respectively. The wettability for the samples was found to depend strongly on the surface morphology which results from the growth temperature.
基金Supported by fund of the Excellent Science&Technology Innovate Team Program for Young and Middle-aged Talents in University of Hubei Province(T201225)Hubei Provincial Key Laboratory of Plant Anti-Cancer Active Substance Purification and Application,The Second Excellent Teacher Team of Hubei University of Education(2012K203)
文摘Preparing SnO2 with hierarchical micro/nano structures by hydrothermal, coordination, templating and electrochemical deposition methods and their mechanisms are investigated. The result shows that the echinus-like SnO2 prepared by Method 1 is a typical Ostwald mechanism that develops from internally to externally. The cabbage-like SnO2 by Method 2 is produced with oxalic acid as complexing agent to set-up precursor of SnO2, and then precursors are bocked around the body that is around the body being bocked. The nest-like SnO2 by Method 3 is controlled by citric acid as coordinator for the nucleation as well as the grow rate and setup process. Spongy-like SnO2 by Method 4 is produced using PST as template, PST is be infiltered into SnO2 precursor by gravity and capillary and treated thermally to form a multiporous structure. The petal-like SnO2 by Method 5 is formed with crystal deposition emergence due to oxidation-reduction reactions of two electrodes in an electric field. XRD analyses shows that the five results are all pure phase SnO2. It provides basic data for SnOE industrial application.
基金Foundation items: National Natural Science Foundations of China (No.10835004,No.10775031)Science and Technology Commission of Shanghai Municipality,China (No. 10XD1400100)
文摘The hydrophobic films of TixOy-CmHn. deposited from mixture gases of titanium isopropoxide （TTIP） and oxygen by plasma enhanced chemical vapor deposition （PECVD） were investigated. The films were investigated by scanning electron microscope （ SEM ）, transmission electron microscope （ TEM ）, Fourier transform infrared spectrometer （ FTIR）, X-Ray diffraction （ XRD ）, element analysis （ EA ）, ultraviolet visible spectrometer （ UV-Vis）, and water contact angle （WCA）. The results reveal that the surface of the films is formed by mierosized papillaes aggregated by inorganic and organic phases of complex nanoparticles with size from 50 nm to 200 nm when the discharge power is increased from 40 W to 150 W. All fdms demonstrate the strong broad of Ti-O-Ti stretching vibration at 400 -800cm-1, -CH bending vibration at 1 388 cm -1, and broadening -OH stretching vibration at 3 000-3500 cm-1 With the increase of the discharge power, the asdeposited film changes from amorphous to crystallization. The WCA of the film can be as high as 160°, indicating the hydrophobicity. The films show a similar ultraviolet absorption property as the bulk TiO2 film. The composition of the composition of film deposited at 150 W can be formulated as Tio.302-C1.5H3. Therefore, the composition formula of this hydrophobic film could be expressed as TiO2-C5H10O4.7. It is believed that the complex micro/nano structures of TiO2 and C5H10O4.7 residues are responsible for the observed hydrophobicity and the ultraviolet absorption property of the film.
文摘The work describes the properties of soluble organic silicates and their applications to obtain nanocomposite materials. We analyzed the properties of the water-soluble high-modulus silicate systems and their technology for producing. The aim of this paper is the comparison properties of binders based on liquid glass containing strong organic bases silicates. We have shown how these systems are transformed from lower to higher oligomers through the formation of the silica sol and the implementation of the sol-gel process for these oligomers. We have conducted advanced research of various aspects of the use of these materials as the binder. Advantages of strong organic bases silicates in the preparation of heat resistant, nanocomposite materials are shown. Ways to obtaining quaternary ammonium silicates and their use to produce nanocomposites are proposed. Products obtained in this way can be used as a binder in the preparation of nanostruetured composite materials, water-based paints, coatings, etc. Modifiers have been proposed for making of hybrid nanostructured composite materials by a sol-gel process. There have been shown of structuring phenomena some aspects, synthesis and application of hybrid materials based on silica with grafted polymers. It has been shown, the possibility of modifying compositions using the nanostructuring agents such as tetrafurfuryloxysilane. This paper also describes methods for the synthesis of products for modifying a sol-gel process using organic soluble silicates. We are displaying their use for the production of new nanocomposite materials and coatings for protection against various external factors.
文摘A global net sum equilibrium in heat exchange is a fact and thus a global climate change doesn’t exist, but climate shifts in climate cells, especially in the northern temperate cell, do. The global climate has been ever since homeostatic, and has recuperated far huger climate impacts in the past. Current climate models need a drastically revision on the focus of carbon dioxide as main driver. Carbon dioxide and other carbon gasses do influence albedo patterns, but provide globally a homeostatic effect with a commonly accepted increase impact of 0.3 degrees Celsius. Carbon dioxide does not trigger the climate shifts, but is an indicator of exhaust of combustion processes that emit very small particles which drive these climate shifts. They are the fine dust and nano structured particles that cause the shifts of the climate in cells, as demonstrated in this article and results i.e. in more thunder and lightning, extreme weather, distinct droughts and precipitation patterns. The causes underlying these shifts are nano structured particles in the upper troposphere and lower stratosphere, especially largely produced and remain in the temperate climate northern hemisphere cell and get dispersed by jet streams and low and high pressure areas. However, because of electrical charge, caused by friction or due to anthropogenic negatively charged nano structured particle, emissions will travel up to the lower stratosphere and become neutralized at the electro sphere level, and they do also have a tendency to move to the Arctic. The southern hemisphere climate faces limited anthropogenic emissions, because only 10 percent of the world population can contribute with less pollutant providing activities, and hasn’t changed, but that could well be because it is equally influenced and driven, like the northern hemisphere, by the variation of sun activity in diverse cycles. The present problem is that we produce huge amounts of air borne nano structured particles from combustion processes that never exist before. The only nano particles known in nature are those who are limited produced from volcano eruptions and natural forest fires. The natural feedback systems that moderate climate shifts and influence global climate are: convection by cumulonimbus clouds, sea currents and vegetation adaptation. A novel ultra-fine dust electric reduction device (UFDRS-System), created by the author, diminishs to a size of less than 10 nano particles in diameter and thus prevents major electrical drift of nano structured particulates in the upper troposphere and lower stratosphere and contributes largely in purifying the air and thus reduces the effects of climate shifts. Like solving the acid rain problems with sulphuric acid reduction and ozone depletion with CFCs proscription in the past, the present climate shifts can be mitigated via a reduction of the anthropogenic nano structured particulates in the atmosphere. The UFDRS-System together with the given nature’s solutions can re-balance our atmosphere in a period of two years or a little bit longer due to extension of the lifespan of a particle in the stratosphere.
