The operating performance of positive discharge blower is markedly influenced by the pulsation of the discharge flow, but difficult to be measured with experimental methods. The internal and discharge flow of positive...The operating performance of positive discharge blower is markedly influenced by the pulsation of the discharge flow, but difficult to be measured with experimental methods. The internal and discharge flow of positive discharge blower with involute type three-lobe are numerically investigated, both in air cooling and countercurrent cooling conditions by means of computational fluid dynamics （CFD）. The unsteady compressible flow equations are solved using RNG x-ε turbulent model. The finite difference method and the second order upwind difference scheme are applied into discrete equations. In the numerical simulation, the dynamic mesh techniques are used to approach the rotating displacement of cell cubage and the alterability of inlet, outlet flow area. The non-uniform mesh is applied to the rotor-stator coupled area. The reliability of the numerical method is verified by simulating the inner flow and comparing with the semi-empirical theory. The flow flux curves and the distributing of velocity vector showed obvious vortex motion in all the discharge process, both in air cooling and countercurrent cooling conditions. These vortexes with different positions, intension and numbers at different rotating angles have remarkable influences on the discharge flux. For air cooling, the vortex produced a second pulsation with big-amplitude in a cycle, and led to the early appearance of maximum of backflow. For countercurrent cooling, the frequency of pulsation increased due to the pre-inflow, but the backflow at the outlet is prevented, also the pulsation strength has greatly decreased.展开更多
The gas-solid two-phase flous of the precalciner were simulated by different multiphase models,such as mixture model,the Enderium model,including mixture and dispersed,and discrete phase model（DPM）,The results of th...The gas-solid two-phase flous of the precalciner were simulated by different multiphase models,such as mixture model,the Enderium model,including mixture and dispersed,and discrete phase model（DPM）,The results of the different multiphase models were analyzed and compared.showing the rationality of the diffusion and mixture of the cenment raic meals and coal poroder some extent Moreover,the results also shose the rationality of the given inlets parameters of actual process of the precalciner.展开更多
Through numerical modeling, a kind of simplified calculating method for standing wave pressure on vertical face breakwater have been put forward. Not only the formulas proposed in this paper are simple in form and ver...Through numerical modeling, a kind of simplified calculating method for standing wave pressure on vertical face breakwater have been put forward. Not only the formulas proposed in this paper are simple in form and very easy in use, but also they possess continuity on the full range of standing wave. And more, the precision requiremennts of calculation can be satisfied to a certain extent in engineering practice.展开更多
Two types of automatic systems.for assembly welding. Santana automobile muffler in mass production are suggested in this paper Such systems were aPPlied to manufacture at the beginning of 1995, and were approved to ha...Two types of automatic systems.for assembly welding. Santana automobile muffler in mass production are suggested in this paper Such systems were aPPlied to manufacture at the beginning of 1995, and were approved to have high productivity and quality but low cost. It is an optimal selection for someone who manufacture automobile muffler or Similar productlons.展开更多
基金supported by National Natural Science Foundation of China (Grant No. 10802058)
文摘The operating performance of positive discharge blower is markedly influenced by the pulsation of the discharge flow, but difficult to be measured with experimental methods. The internal and discharge flow of positive discharge blower with involute type three-lobe are numerically investigated, both in air cooling and countercurrent cooling conditions by means of computational fluid dynamics （CFD）. The unsteady compressible flow equations are solved using RNG x-ε turbulent model. The finite difference method and the second order upwind difference scheme are applied into discrete equations. In the numerical simulation, the dynamic mesh techniques are used to approach the rotating displacement of cell cubage and the alterability of inlet, outlet flow area. The non-uniform mesh is applied to the rotor-stator coupled area. The reliability of the numerical method is verified by simulating the inner flow and comparing with the semi-empirical theory. The flow flux curves and the distributing of velocity vector showed obvious vortex motion in all the discharge process, both in air cooling and countercurrent cooling conditions. These vortexes with different positions, intension and numbers at different rotating angles have remarkable influences on the discharge flux. For air cooling, the vortex produced a second pulsation with big-amplitude in a cycle, and led to the early appearance of maximum of backflow. For countercurrent cooling, the frequency of pulsation increased due to the pre-inflow, but the backflow at the outlet is prevented, also the pulsation strength has greatly decreased.
文摘The gas-solid two-phase flous of the precalciner were simulated by different multiphase models,such as mixture model,the Enderium model,including mixture and dispersed,and discrete phase model（DPM）,The results of the different multiphase models were analyzed and compared.showing the rationality of the diffusion and mixture of the cenment raic meals and coal poroder some extent Moreover,the results also shose the rationality of the given inlets parameters of actual process of the precalciner.
文摘Through numerical modeling, a kind of simplified calculating method for standing wave pressure on vertical face breakwater have been put forward. Not only the formulas proposed in this paper are simple in form and very easy in use, but also they possess continuity on the full range of standing wave. And more, the precision requiremennts of calculation can be satisfied to a certain extent in engineering practice.
文摘Two types of automatic systems.for assembly welding. Santana automobile muffler in mass production are suggested in this paper Such systems were aPPlied to manufacture at the beginning of 1995, and were approved to have high productivity and quality but low cost. It is an optimal selection for someone who manufacture automobile muffler or Similar productlons.
