A novel organized multipulse pattern and its birth dynamics under strong optomechanical effect in microfiber-assisted ultrafast fiber laser are investigated in this work.The background pulses are observed to obviously...A novel organized multipulse pattern and its birth dynamics under strong optomechanical effect in microfiber-assisted ultrafast fiber laser are investigated in this work.The background pulses are observed to obviously exhibit selectively amplifying self-organized process of evolving into quasi-stable equidistant clusters.The radio frequency spectrum of the multipulse pattern displays a harmonic mode-locking-like behavior with a repetition rate of 2.0138 GHz,corresponding to the frequency of torsional-radial(TR_(2m))acoustic mode in microfiber.The results show the evidence of optomechanical effect in dominating the birth dynamics and pattern of multipulse.展开更多
A multipulse Nd：YAG （Neodym-yttrium aluminium garnet） laser Thomson scattering diagnostic system developed was recently applied on HT-7 tokamak to obtain more accurate electron temperatures. A CAMAC-based real-time...A multipulse Nd：YAG （Neodym-yttrium aluminium garnet） laser Thomson scattering diagnostic system developed was recently applied on HT-7 tokamak to obtain more accurate electron temperatures. A CAMAC-based real-time computer system for laser control, data acquisition, analysis and calibration was investigated in detail. Furthermore, the reliability and accuracy of this diagnostic system were demonstrated by comparing the results with those of a soft-X ray diagnostic system.展开更多
We have investigated the role of the ambient gas nature and pressure in the structure and appearance of the laser treated zone. and the influence of the total duration and temporal shape of laser pulse with the laser ...We have investigated the role of the ambient gas nature and pressure in the structure and appearance of the laser treated zone. and the influence of the total duration and temporal shape of laser pulse with the laser tight being λ= 10.6μm wavelength incident upon a metallic surface at intermediate taser intensities of 107-108 W / cm2. A plasma is accompanied by the action of the laser pulse, It acts as an active moderator among laser beam and target thus determining the final status of the contact surface展开更多
The purpose of this work was to explore the influence law of vibration load on rock mass structure and slope stability.Based on the type and transmission way of vibration stress wave,the main stress in the horizontal ...The purpose of this work was to explore the influence law of vibration load on rock mass structure and slope stability.Based on the type and transmission way of vibration stress wave,the main stress in the horizontal and vertical directions was analyzed and the superposition effect of the stress wave was revealed.After the mechanical analysis of the sliding mass,the calculation formulas of the anti-sliding force and the sliding force were derived and the damage mechanism of blasting vibration to the structural plane was defined.In addition,according to the structure and lithologic parameter of the slope as well as the vibration monitoring data,the west slope stability of Xiaolongtan open pit mine was analyzed.The results show that the time-dependent stability factor is proportional to the vibration speed and the peak values appear at the same time.Vibration load promotes the breakage of the structural plane leading to the drop of the west slope stability factor by 0.23%.Under the multipoint simultaneous blasting,the fluctuating laws of the stability factors are consistent.The more the start-up points are,the higher the weakening degree to the slope stability is.Under the multipoint allochronic blasting,the stability factor depends on the synthetic waveform structure of all vibration waves.The greater the blasting time difference is,the lower the weakening degree to the slope stability is.Selecting the reasonable quantity of start-up points and time difference could fully reduce the adverse influence of vibration load to slope stability.展开更多
The study of multipoint blank holder force（BHF） control is carried out for hydroforming a complicated shape motorcycle fuel tank. By finite element method （FEM） simulation, the configuration of multipoint blank ho...The study of multipoint blank holder force（BHF） control is carried out for hydroforming a complicated shape motorcycle fuel tank. By finite element method （FEM） simulation, the configuration of multipoint blank holder cylinders and the setting of local BHF are optimized, and the influences of the multipoint BHF on the hydromechanical deep drawing and conventional hydroforming processes are studied. The desired fluid pressure and whole BHF are predicted for hydromechanical deep drawing process. Finally, simulation results are testified by forming experiment, and they are in agreement very well.展开更多
We describe a system for multipoint videoconferencing that offers extremely low end-to-end delay, low cost and complexity, and high scalability, alongside standard features associated with high-end solutions such as r...We describe a system for multipoint videoconferencing that offers extremely low end-to-end delay, low cost and complexity, and high scalability, alongside standard features associated with high-end solutions such as rate matching and per- sonal video layout. The system accommodates heterogeneous receivers and networks based on the Internet Protocol and relies on scalable video coding to provide a coded representation of a source video signal at multiple temporal and spatial resolutions as well as quality levels. These are represented by distinct bitstream components which are created at each end-user encoder. Depending on the specific conferencing environment, some or all of these components are transmitted to a Scalable Video Conferencing Server (SVCS). The SVCS redirects these components to one or more recipients depending on, e.g., the available network con- ditions and user preferences. The scalable aspect of the video coding technique allows the system to adapt to different network conditions, and also accommodates different end-user requirements (e.g., a user may elect to view another user at a high or low spatial resolution). Performance results concerning flexibility, video quality and delay of the system are presented using the Joint Scalable Video Model (JSVM) of the forthcoming SVC (H.264 Annex G) standard, demonstrating that scalable coding outper- forms existing state-of-the-art systems and offers the right platform for building next-generation multipoint videoconferencing systems.展开更多
The neutron flux monitor(NFM)system is an important diagnostic subsystem introduced by large nuclear fusion devices such as international thermonuclear experimental reactor(ITER),Japan torus-60,tokamak fusion test rea...The neutron flux monitor(NFM)system is an important diagnostic subsystem introduced by large nuclear fusion devices such as international thermonuclear experimental reactor(ITER),Japan torus-60,tokamak fusion test reactor,and HL-2 A.Neutron fluxes can provide real-time parameters for nuclear fusion,including neutron source intensity and fusion power.Corresponding to different nuclear reaction periods,neutron fluxes span over seven decades,thereby requiring electronic devices to operate in counting and Campbelling modes simultaneously.Therefore,it is crucial to design a real-time NFM system to encompass such a wide dynamic range.In this study,a high-precision NFM system with a wide measurement range of neutron flux is implemented using realtime multipoint linear calibration.It can automatically switch between counting and Campbelling modes with variations in the neutron flux.We established a testing platform to verify the feasibility of the NFM system,which can output the simulated neutron signal using an arbitrary waveform generator.Meanwhile,the accurate calibration interval of the Campbelling mode is defined well.Based on the above-mentioned design,the system satisfies the requirements,offering a dynamic range of 10~8 cps,temporal resolution of 1 ms,and maximal relative error of 4%measured at the signal-to-noise ratio of 15.8 dB.Additionally,the NFM system is verified in a field experiment involving HL-2 A,and the measured neutron flux is consistent with the results.展开更多
The static modeling and dynamic simulation are essential and critical processes in petroleum exploration and development. In this study, lithofacies models for Wabiskaw Member in Athabasca, Canada are generated by mul...The static modeling and dynamic simulation are essential and critical processes in petroleum exploration and development. In this study, lithofacies models for Wabiskaw Member in Athabasca, Canada are generated by multipoint statistics(MPS) and then compared with the models built by sequential indicator simulation(SIS). Three training images(Tls) are selected from modern depositional environments;the Orinoco River Delta estuary, Cobequid bay-Salmon River estuary, and Danube River delta environment. In order to validate lithofacies models, average and variance of similarity in lithofacies are calculated through random and zonal blind-well tests.In random six-blind-well test, similarity average of MPS models is higher than that of SIS model. The Salmon MPS model closely resembles facies pattern of Wabiskaw Member in subsurface. Zonal blind-well tests show that successful lithofacies modeling for transitional depositional setting requires additional or proper zonation information on horizontal variation, vertical proportion, and secondary data.As Wabiskaw Member is frontier oilsands lease, it is impossible to evaluate the economics from production data or dynamic simulation. In this study, a dynamic steam assisted gravity drainage(SAGD)performance indicator(SPIDER) on the basis of reservoir characteristics is calculated to build 3 D reservoir model for the evaluation of the SAGD feasibility in Wabiskaw Member. SPIDER depends on reservoir properties, economic limit of steam-oil ratio, and bitumen price. Reservoir properties like porosity,permeability, and water saturation are measured from 13 cores and calculated from 201 well-logs. Three dimensional volumes of reservoir properties are constructed mostly based on relationships among properties. Finally, net present value(NPV) volume can be built by equation relating NPV and SPIDER. The economic area exceeding criterion of US$ 10,000 is identified, and the ranges of reservoir properties are estimated. NPV-volume-generation workflow from reservoir parameter to static model provides costand time-effective method to evaluate the oilsands SAGD project.展开更多
The detonation wave-aiming warhead can effectively enhance the lethality efficiency. In the past, rules for casing rupture and velocity distribution under asymmetrical initiations were not adequately investigated. In ...The detonation wave-aiming warhead can effectively enhance the lethality efficiency. In the past, rules for casing rupture and velocity distribution under asymmetrical initiations were not adequately investigated. In this study, X-ray photography and numerical modelling are used to examine the casing expansions under centre point, asymmetrical one-point, and asymmetrical two-point(with central angles of 45° and 90°) initiations. The results indicate that early casing ruptures are caused by local high pressures, induced by the initiation, detonation wave interaction, and Mach wave onset. The fragment shapes are controlled by the impact angle of the detonation wave. The fragment velocity distributions differ under different initiation types, and the end rarefaction waves can affect the velocity distribution.This study can serve as a reference for the design and optimization of high-efficiency warheads.展开更多
Measurement-device-independent quantum key distribution(MDI-QKD) offers a practical way to realize a startype quantum network. Previous experiments on MDI-QKD networks can only support the point-to-point communication...Measurement-device-independent quantum key distribution(MDI-QKD) offers a practical way to realize a startype quantum network. Previous experiments on MDI-QKD networks can only support the point-to-point communication. We experimentally demonstrate a plug-and-play MDI-QKD network which can support the pointto-multipoint communication among three users. Benefiting from the plug-and-play MDI-QKD architecture,the whole network is automatically stabilized in spectrum, polarization, arrival time, and phase reference. The users only need the encoding devices, which means that the hardware requirements are greatly reduced. Our experiment shows that it is feasible to establish a point-to-multipoint MDI-QKD network.展开更多
A compact, low cost, multipoint Thomson scattering diagnostic system for HT-7 superconducting tokamak has been in operation since 1999. Its capability of measuring electron temperatures is in the range of 200 eV to 2 ...A compact, low cost, multipoint Thomson scattering diagnostic system for HT-7 superconducting tokamak has been in operation since 1999. Its capability of measuring electron temperatures is in the range of 200 eV to 2 keV at a density of a few times IO12 cm-3, with a spatial resolution of 2.4 cm for 5 spatial points and a temporal resolution of 1 ms-1 s for 8 time points. The main components of the diagnostic system include a 20-25 J Nd: glass laser with 35 ns pulse width (8 pulses per burst), a KDP frequency-doubling unit, spherical mirrors of multipass input optical system, a wide-angle collection objective, a bandpass glass filter for reducing the stray light to zero a f/2.5 polychromator, a fiberglass collimator, a photomultiplier's box with electronic preamplifier, high gain and high signal/noise ratio, CAMAC data acquisition and so on. The multipass optical system has been successful at increasing the quantity of scattered photons by passing the probing laser beam 10 times through the plasma under investigation. The HT7 Thomson scattering diagnostic has provided successfully the information on two-dimensional electron temperature in the plasma of HT-7 tokamak with LHCD and IBW.展开更多
The multipoint steam injection string of the horizontal well is a commonly used downhole component for high efficiency steam injection of the thermal recovery horizontal well. A reasonable layout of the valves to ensu...The multipoint steam injection string of the horizontal well is a commonly used downhole component for high efficiency steam injection of the thermal recovery horizontal well. A reasonable layout of the valves to ensure an even steam output of each point is still not well designed. At present, a general design method which is urgently necessary isn＇ t applied by each factory. According to the balance relationship of the momentum, the energy and the mass of the fluid flowing in the string, the pressure distribution equation of the fluid flowing in the multipoint steam injection string is built. On the basis of this equation, the design calculation method of the multipoint steam injection string is come up with. A specific example is given in the paper. Study shows that, with the equation built in this paper, the string can be designed with each axial valve having the same output, so that the technical demand of an even steam injection of the horizontal well section can be met.展开更多
A multipoint excitation experiment system of the 1Cr18Ni9 steel plate-pipe network as the main vibration body was established,which used transient flow produced by the wave exciter to excite the 1Cr18Ni9 steel plate-p...A multipoint excitation experiment system of the 1Cr18Ni9 steel plate-pipe network as the main vibration body was established,which used transient flow produced by the wave exciter to excite the 1Cr18Ni9 steel plate-pipe network to vibrate.The experimental results show that the 1Cr18Ni9 steel plate vibrates in three dimensions.The vibrations of the particles of the steel plate distributing along the pipe＇s axial have phase differences and take place near the cylinder side first.Therefore,it is a multipoint vibration mode.The amplitude of the 1Cr18Ni9 steel plate increases as the system pressure increases and decreases as the wave exciter＇s frequency decreases.The vibration intensity of the particles of the 1Cr18Ni9 steel plate close to the cylinder is the strongest and the amplitude is the highest in Y direction at a given system frequency.The vibration intensity of the particles close to the wave exciter is the strongest and the amplitude is the smallest in Z direction at a given system pressure.展开更多
A collocation method with multipoint weighting is presented in this paper.Itconverges as rapidly as the Galerkin method hut needs less computation effort.By means ofthe technique with Gauss points(superconvergence poi...A collocation method with multipoint weighting is presented in this paper.Itconverges as rapidly as the Galerkin method hut needs less computation effort.By means ofthe technique with Gauss points(superconvergence points)as the collocating points,dipole anddipole array are analyzed,and the numerical results are in good agreement with those given inrelative references.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61525505,11774310,and 62035010)the Postdoctoral Science Foundation of China(Grant No.2019M652076).
文摘A novel organized multipulse pattern and its birth dynamics under strong optomechanical effect in microfiber-assisted ultrafast fiber laser are investigated in this work.The background pulses are observed to obviously exhibit selectively amplifying self-organized process of evolving into quasi-stable equidistant clusters.The radio frequency spectrum of the multipulse pattern displays a harmonic mode-locking-like behavior with a repetition rate of 2.0138 GHz,corresponding to the frequency of torsional-radial(TR_(2m))acoustic mode in microfiber.The results show the evidence of optomechanical effect in dominating the birth dynamics and pattern of multipulse.
基金National Natural Science Foundation of China(Nos.10675126,10375068))
文摘A multipulse Nd：YAG （Neodym-yttrium aluminium garnet） laser Thomson scattering diagnostic system developed was recently applied on HT-7 tokamak to obtain more accurate electron temperatures. A CAMAC-based real-time computer system for laser control, data acquisition, analysis and calibration was investigated in detail. Furthermore, the reliability and accuracy of this diagnostic system were demonstrated by comparing the results with those of a soft-X ray diagnostic system.
文摘We have investigated the role of the ambient gas nature and pressure in the structure and appearance of the laser treated zone. and the influence of the total duration and temporal shape of laser pulse with the laser tight being λ= 10.6μm wavelength incident upon a metallic surface at intermediate taser intensities of 107-108 W / cm2. A plasma is accompanied by the action of the laser pulse, It acts as an active moderator among laser beam and target thus determining the final status of the contact surface
基金Project(2015M580491)supported by the China Postdoctoral Science FoundationProject(51404262)supported by the National Natural Science Foundation of China+1 种基金Project(2014XT01)supported by the Research Funds for the Central Universities,ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The purpose of this work was to explore the influence law of vibration load on rock mass structure and slope stability.Based on the type and transmission way of vibration stress wave,the main stress in the horizontal and vertical directions was analyzed and the superposition effect of the stress wave was revealed.After the mechanical analysis of the sliding mass,the calculation formulas of the anti-sliding force and the sliding force were derived and the damage mechanism of blasting vibration to the structural plane was defined.In addition,according to the structure and lithologic parameter of the slope as well as the vibration monitoring data,the west slope stability of Xiaolongtan open pit mine was analyzed.The results show that the time-dependent stability factor is proportional to the vibration speed and the peak values appear at the same time.Vibration load promotes the breakage of the structural plane leading to the drop of the west slope stability factor by 0.23%.Under the multipoint simultaneous blasting,the fluctuating laws of the stability factors are consistent.The more the start-up points are,the higher the weakening degree to the slope stability is.Under the multipoint allochronic blasting,the stability factor depends on the synthetic waveform structure of all vibration waves.The greater the blasting time difference is,the lower the weakening degree to the slope stability is.Selecting the reasonable quantity of start-up points and time difference could fully reduce the adverse influence of vibration load to slope stability.
基金This project is supported by Doctoral Fundation of China(No.20010487002) and Municipal Key Technology R&D Program of Guangzhou, China(No, 2002Z3-0211).
文摘The study of multipoint blank holder force（BHF） control is carried out for hydroforming a complicated shape motorcycle fuel tank. By finite element method （FEM） simulation, the configuration of multipoint blank holder cylinders and the setting of local BHF are optimized, and the influences of the multipoint BHF on the hydromechanical deep drawing and conventional hydroforming processes are studied. The desired fluid pressure and whole BHF are predicted for hydromechanical deep drawing process. Finally, simulation results are testified by forming experiment, and they are in agreement very well.
文摘We describe a system for multipoint videoconferencing that offers extremely low end-to-end delay, low cost and complexity, and high scalability, alongside standard features associated with high-end solutions such as rate matching and per- sonal video layout. The system accommodates heterogeneous receivers and networks based on the Internet Protocol and relies on scalable video coding to provide a coded representation of a source video signal at multiple temporal and spatial resolutions as well as quality levels. These are represented by distinct bitstream components which are created at each end-user encoder. Depending on the specific conferencing environment, some or all of these components are transmitted to a Scalable Video Conferencing Server (SVCS). The SVCS redirects these components to one or more recipients depending on, e.g., the available network con- ditions and user preferences. The scalable aspect of the video coding technique allows the system to adapt to different network conditions, and also accommodates different end-user requirements (e.g., a user may elect to view another user at a high or low spatial resolution). Performance results concerning flexibility, video quality and delay of the system are presented using the Joint Scalable Video Model (JSVM) of the forthcoming SVC (H.264 Annex G) standard, demonstrating that scalable coding outper- forms existing state-of-the-art systems and offers the right platform for building next-generation multipoint videoconferencing systems.
基金supported by the National Natural Science Foundation of China(Nos.11475131,11975307,and 11575184)the National Magnetic Confinement Fusion Energy Development Research(No.2013GB104003)。
文摘The neutron flux monitor(NFM)system is an important diagnostic subsystem introduced by large nuclear fusion devices such as international thermonuclear experimental reactor(ITER),Japan torus-60,tokamak fusion test reactor,and HL-2 A.Neutron fluxes can provide real-time parameters for nuclear fusion,including neutron source intensity and fusion power.Corresponding to different nuclear reaction periods,neutron fluxes span over seven decades,thereby requiring electronic devices to operate in counting and Campbelling modes simultaneously.Therefore,it is crucial to design a real-time NFM system to encompass such a wide dynamic range.In this study,a high-precision NFM system with a wide measurement range of neutron flux is implemented using realtime multipoint linear calibration.It can automatically switch between counting and Campbelling modes with variations in the neutron flux.We established a testing platform to verify the feasibility of the NFM system,which can output the simulated neutron signal using an arbitrary waveform generator.Meanwhile,the accurate calibration interval of the Campbelling mode is defined well.Based on the above-mentioned design,the system satisfies the requirements,offering a dynamic range of 10~8 cps,temporal resolution of 1 ms,and maximal relative error of 4%measured at the signal-to-noise ratio of 15.8 dB.Additionally,the NFM system is verified in a field experiment involving HL-2 A,and the measured neutron flux is consistent with the results.
基金supported by the Energy Efficiency and Resources Program of the Korea Institute of Energy Technology Evaluation andPlanning(KETEP,Grant No.20132510100060)the Basic Research Program of Korea Institute of Geoscience and Mineral Resources(KIGAM,GP2017-024)+2 种基金funded by the Ministry of ScienceICTFuture Planning of Korea
文摘The static modeling and dynamic simulation are essential and critical processes in petroleum exploration and development. In this study, lithofacies models for Wabiskaw Member in Athabasca, Canada are generated by multipoint statistics(MPS) and then compared with the models built by sequential indicator simulation(SIS). Three training images(Tls) are selected from modern depositional environments;the Orinoco River Delta estuary, Cobequid bay-Salmon River estuary, and Danube River delta environment. In order to validate lithofacies models, average and variance of similarity in lithofacies are calculated through random and zonal blind-well tests.In random six-blind-well test, similarity average of MPS models is higher than that of SIS model. The Salmon MPS model closely resembles facies pattern of Wabiskaw Member in subsurface. Zonal blind-well tests show that successful lithofacies modeling for transitional depositional setting requires additional or proper zonation information on horizontal variation, vertical proportion, and secondary data.As Wabiskaw Member is frontier oilsands lease, it is impossible to evaluate the economics from production data or dynamic simulation. In this study, a dynamic steam assisted gravity drainage(SAGD)performance indicator(SPIDER) on the basis of reservoir characteristics is calculated to build 3 D reservoir model for the evaluation of the SAGD feasibility in Wabiskaw Member. SPIDER depends on reservoir properties, economic limit of steam-oil ratio, and bitumen price. Reservoir properties like porosity,permeability, and water saturation are measured from 13 cores and calculated from 201 well-logs. Three dimensional volumes of reservoir properties are constructed mostly based on relationships among properties. Finally, net present value(NPV) volume can be built by equation relating NPV and SPIDER. The economic area exceeding criterion of US$ 10,000 is identified, and the ranges of reservoir properties are estimated. NPV-volume-generation workflow from reservoir parameter to static model provides costand time-effective method to evaluate the oilsands SAGD project.
基金funded by the National Natural Science Foundation of China [Grant No. 12002178]opening project of the State Key Laboratory of Explosion Science and Technology (Beijing Institute of Technology) [Grant No. KFJJ22-17M]the Fundamental Research Funds for Central Universities
文摘The detonation wave-aiming warhead can effectively enhance the lethality efficiency. In the past, rules for casing rupture and velocity distribution under asymmetrical initiations were not adequately investigated. In this study, X-ray photography and numerical modelling are used to examine the casing expansions under centre point, asymmetrical one-point, and asymmetrical two-point(with central angles of 45° and 90°) initiations. The results indicate that early casing ruptures are caused by local high pressures, induced by the initiation, detonation wave interaction, and Mach wave onset. The fragment shapes are controlled by the impact angle of the detonation wave. The fragment velocity distributions differ under different initiation types, and the end rarefaction waves can affect the velocity distribution.This study can serve as a reference for the design and optimization of high-efficiency warheads.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11674397 and 61671455
文摘Measurement-device-independent quantum key distribution(MDI-QKD) offers a practical way to realize a startype quantum network. Previous experiments on MDI-QKD networks can only support the point-to-point communication. We experimentally demonstrate a plug-and-play MDI-QKD network which can support the pointto-multipoint communication among three users. Benefiting from the plug-and-play MDI-QKD architecture,the whole network is automatically stabilized in spectrum, polarization, arrival time, and phase reference. The users only need the encoding devices, which means that the hardware requirements are greatly reduced. Our experiment shows that it is feasible to establish a point-to-multipoint MDI-QKD network.
文摘A compact, low cost, multipoint Thomson scattering diagnostic system for HT-7 superconducting tokamak has been in operation since 1999. Its capability of measuring electron temperatures is in the range of 200 eV to 2 keV at a density of a few times IO12 cm-3, with a spatial resolution of 2.4 cm for 5 spatial points and a temporal resolution of 1 ms-1 s for 8 time points. The main components of the diagnostic system include a 20-25 J Nd: glass laser with 35 ns pulse width (8 pulses per burst), a KDP frequency-doubling unit, spherical mirrors of multipass input optical system, a wide-angle collection objective, a bandpass glass filter for reducing the stray light to zero a f/2.5 polychromator, a fiberglass collimator, a photomultiplier's box with electronic preamplifier, high gain and high signal/noise ratio, CAMAC data acquisition and so on. The multipass optical system has been successful at increasing the quantity of scattered photons by passing the probing laser beam 10 times through the plasma under investigation. The HT7 Thomson scattering diagnostic has provided successfully the information on two-dimensional electron temperature in the plasma of HT-7 tokamak with LHCD and IBW.
文摘The multipoint steam injection string of the horizontal well is a commonly used downhole component for high efficiency steam injection of the thermal recovery horizontal well. A reasonable layout of the valves to ensure an even steam output of each point is still not well designed. At present, a general design method which is urgently necessary isn＇ t applied by each factory. According to the balance relationship of the momentum, the energy and the mass of the fluid flowing in the string, the pressure distribution equation of the fluid flowing in the multipoint steam injection string is built. On the basis of this equation, the design calculation method of the multipoint steam injection string is come up with. A specific example is given in the paper. Study shows that, with the equation built in this paper, the string can be designed with each axial valve having the same output, so that the technical demand of an even steam injection of the horizontal well section can be met.
基金Funded by the International S&T Cooperation Program of China(No. 2011DFA72120)the Program for Innovation Research Team in University of Shanxi Province(No.2011018022)the University Young and Middle-aged Top-notch Innovative Talent Program of Shanxi Province(No.20091020235)
文摘A multipoint excitation experiment system of the 1Cr18Ni9 steel plate-pipe network as the main vibration body was established,which used transient flow produced by the wave exciter to excite the 1Cr18Ni9 steel plate-pipe network to vibrate.The experimental results show that the 1Cr18Ni9 steel plate vibrates in three dimensions.The vibrations of the particles of the steel plate distributing along the pipe＇s axial have phase differences and take place near the cylinder side first.Therefore,it is a multipoint vibration mode.The amplitude of the 1Cr18Ni9 steel plate increases as the system pressure increases and decreases as the wave exciter＇s frequency decreases.The vibration intensity of the particles of the 1Cr18Ni9 steel plate close to the cylinder is the strongest and the amplitude is the highest in Y direction at a given system frequency.The vibration intensity of the particles close to the wave exciter is the strongest and the amplitude is the smallest in Z direction at a given system pressure.
文摘A collocation method with multipoint weighting is presented in this paper.Itconverges as rapidly as the Galerkin method hut needs less computation effort.By means ofthe technique with Gauss points(superconvergence points)as the collocating points,dipole anddipole array are analyzed,and the numerical results are in good agreement with those given inrelative references.
