Single and multiple dynamic impacts tests were conducted on ultra-high performance cementitious composite （UHPCC） with various volume fractions of steel fibers （0, 1%, 2%, 3%, 4%） by using the split hopkinson pres...Single and multiple dynamic impacts tests were conducted on ultra-high performance cementitious composite （UHPCC） with various volume fractions of steel fibers （0, 1%, 2%, 3%, 4%） by using the split hopkinson pressure bar （SHPB）. Besides, the ultrasonic velocity method was used to test the damage on specimens caused by dynamic impacts. For single dynamic impact, the data suggest that UHPCC obviously presents dynamic strength enhancement. With increasing of strain rate, the peak stress and peak strain increase rapidly. For multiple dynamic impacts, the results show that addition of steel fibers can obviously enhance the properties of UHPCC to resist the repeated dynamic impacts. Firstly, the number of impacts sharply increases with the increasing of volume fraction of steel fibers. Secondly, the energy absorption ability linearly increases with addition of steel fibers. Thirdly, the steel fibers can prevent the disruption phenomenon and maintain the integrity of specimen.展开更多
Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is cap...Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is captured with high-speed photography.Postmortem samples are characterized with optical imaging,three-dimensional laser scanning,microhardness testing and electron backscatter diffraction.With increasing number of impacts,crater diameter increases slightly,but crater depth and crater volume increase significantly,and strain accumulation leads to microhardness increase overall.Crater parameters all follow power-law relations with the number of impacts.Twin-like deformation bands and macroscopic deformation twins are produced by impact as a result of spontaneous dislocation self-pinning under high strain rate,large shear deformation.Under multiple impacts,shear strain accumulation in the arc-shaped region of the crater induces deformation twinning when it exceeds a critical value(~1.1-1.6).It is highly possible that the deformation twins are related to deformation bands,since they both share one set of the{111}pole with the initial matrix grain.A finite element method model is optimized to reproduce experimental observations and interpret deformation mechanisms.展开更多
As conducting an impact hammer testing during experimental modal analysis,the multiple impact phenomenon must be avoided.It is generally recognized that the multiple impact phenomenon is induced by the tester’s impro...As conducting an impact hammer testing during experimental modal analysis,the multiple impact phenomenon must be avoided.It is generally recognized that the multiple impact phenomenon is induced by the tester’s improper operation and can be avoided through more careful operation.This study theoretically and numerically investigates the whole process of the dynamical interaction between the hammer tip and the impacted structure and discovers the intrinsically physical mechanism of the multiple impact phenomenon.The determination of the interacting process comes down to solve two sets of governing differential equations alternately,and the effectiveness of the theoretical analysis is validated by numerical simulations.Four dimensionless parameters governing the interacting process are recognized in the theoretical framework.The critical stiffness ratio for a given impacted location and the critical impacted location for a given stiffness ratio are analytically determined.These results can guide impact hammer testing to avoid the occurrence of multiple impact by suggesting the hammer tip and impacted locations.展开更多
The ceramics industry,resulting from developments of modern compounds,is a segment of great influence in worldwide sustainability.Artisanal ceramic factories based on wood combustion have significant risks for the cre...The ceramics industry,resulting from developments of modern compounds,is a segment of great influence in worldwide sustainability.Artisanal ceramic factories based on wood combustion have significant risks for the creation and discharge of atmosphere nanoparticles(NPs)and ultra-fine particles(UFPs).At present,there is insufficient recognition on the influence of engineered-NPs on the atmosphere and health.Real improvements are indispensable to diminish contact with NPs.The present study demonstrates the main NPs and UFPS present in an area of intense artisanal wood-combustion ceramic manufacturing.Particulate matter was sampled for morphological,chemical,and geochemical studies by sophisticated electron microbeam microscopy,X-Ray Diffraction,and Raman spectroscopy.From NPs configuration(<10 nm)we identify nucleation.Several amorphous NPs(>10 nm)were produced around the studied artisanal ceramic factories.This study presents an indication of the recent information on population and work-related contact to NPs in the artisanal ceramic factories and their influence on health.展开更多
Theperformanceof a structurally dissipating rock-shed(SDR)depends largely onthecapacityofitsenergy dissipators.At present,mostenergy dissipatorsare made of metals,which dissipateenergy by unrecoverable plastic deforma...Theperformanceof a structurally dissipating rock-shed(SDR)depends largely onthecapacityofitsenergy dissipators.At present,mostenergy dissipatorsare made of metals,which dissipateenergy by unrecoverable plastic deformation.Therefore,they are not able to recover their energy-dissipation capacity after deformation under rockfall impact.However,a rockfall usually disintegrates into pieces when it rolls down from a higher position and results in multiple rockfall impacts.An energy dissipator with self-recovery capability is therefore more suitable for ensuring the safety of SDRs.Replacing metal with polyurethane(a hyperelastic material with remarkable self-recovery capability)can provide self-recovery capability for energy dissipators,making them more suitable for resisting multiple rockfall impacts.In this work,polyurethane was manufactured into twotypes ofenergy dissipators:cylindrical and cubical.Full-scale falling rock impact testsand dynamic numerical simulationswereconducted to study the mechanical response of the energy dissipators.In addition,in order to ensure the accuracy of the simulation,the dynamic mechanical properties of the polyurethanewere tested and its dynamic constitutive model was established.The experimental and simulation tests have clarified the advantages of the polyurethane energy dissipator.We also summarized the practical considerations in the design of energy dissipators.展开更多
The dynamic compressive behavior and constitutive relations of Lanthanum（La） metal was determined by using the first compression in split Hopkinson pressure bar（SHPB） tests at different strain rates and temperatur...The dynamic compressive behavior and constitutive relations of Lanthanum（La） metal was determined by using the first compression in split Hopkinson pressure bar（SHPB） tests at different strain rates and temperatures.The constitutive relation of La metal determined in a certain range of strains was employed and adjusted in numerically simulating large deformations of La metal specimens generated by multi-compression in SHPB tests and recorded by a high-speed camera.The dynamic compressive behavior and constitutive relations of La metal under multiple SHPB tests loading was also revealed.The results of scanning electron microscope（SEM） investigation of the recovered La metal specimens for typical tests showed that there was a variety of deformation microstructures depending on strain rate,temperature and stress state.展开更多
Droplet-based high heat flux dissipation technique under multi-gravitational environments has gained increasing research attention due to the increased requirements of heat dissipation in advanced air-/space-borne ele...Droplet-based high heat flux dissipation technique under multi-gravitational environments has gained increasing research attention due to the increased requirements of heat dissipation in advanced air-/space-borne electronics.In this paper,a threedimensional model was developed to investigate the impact of continuous droplets on liquid film under various Weber numbers and gravity loads.In other words,the effects of Weber number and gravity load on the flow and heat transfer characteristics were investigated.The results demonstrated that the dissipated heat flux was positively correlated with both Weber number and gravity load.A large Weber number indicated larger kinetic energy of a droplet,leading to a greater disturbance on the impacted film area.When the Weber number was doubled,the average wall heat flux could be enhanced by 36.3%.In addition,the heat flux could be boosted by 5.4%when the gravity load ranged from 0 to 1g.Moreover,a weightless condition suppressed the vapor escape rates on the heating wall where the volume fraction of the vapor on the wall could increase by 20%under 0g,leading to deteriorated heat transfer performance.The novelty in this paper lies in the accurate three-dimensional modeling of an aerospaceoriented droplet impacting two-phase heat transfer and fluid dynamics,associating macro-scale thermal performance to microscale thermophysics mechanisms.The findings of this study could guide the development of aerospace-borne spray cooling facilities for advanced aerospace thermal management.展开更多
基金Funded by the National Natural Science Foundation of China(51178106)the Doctoral Program of Higher Education of China(20100092110029)the Key Laboratory of Urban and Architectural Heritage Conservation,Ministry of Education,Southeast University
文摘Single and multiple dynamic impacts tests were conducted on ultra-high performance cementitious composite （UHPCC） with various volume fractions of steel fibers （0, 1%, 2%, 3%, 4%） by using the split hopkinson pressure bar （SHPB）. Besides, the ultrasonic velocity method was used to test the damage on specimens caused by dynamic impacts. For single dynamic impact, the data suggest that UHPCC obviously presents dynamic strength enhancement. With increasing of strain rate, the peak stress and peak strain increase rapidly. For multiple dynamic impacts, the results show that addition of steel fibers can obviously enhance the properties of UHPCC to resist the repeated dynamic impacts. Firstly, the number of impacts sharply increases with the increasing of volume fraction of steel fibers. Secondly, the energy absorption ability linearly increases with addition of steel fibers. Thirdly, the steel fibers can prevent the disruption phenomenon and maintain the integrity of specimen.
基金supported by the Scientific Challenge Project of China(Grant No.TZ2018001)the National Natural Science Foundation of China(Grant Nos.11627901,11802252)the Science and Technology Program of Sichuan Province(Grant No.2020YFG0415)。
文摘Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is captured with high-speed photography.Postmortem samples are characterized with optical imaging,three-dimensional laser scanning,microhardness testing and electron backscatter diffraction.With increasing number of impacts,crater diameter increases slightly,but crater depth and crater volume increase significantly,and strain accumulation leads to microhardness increase overall.Crater parameters all follow power-law relations with the number of impacts.Twin-like deformation bands and macroscopic deformation twins are produced by impact as a result of spontaneous dislocation self-pinning under high strain rate,large shear deformation.Under multiple impacts,shear strain accumulation in the arc-shaped region of the crater induces deformation twinning when it exceeds a critical value(~1.1-1.6).It is highly possible that the deformation twins are related to deformation bands,since they both share one set of the{111}pole with the initial matrix grain.A finite element method model is optimized to reproduce experimental observations and interpret deformation mechanisms.
基金the National Natural Science Foundation of China under Grant Nos.11872328,11532011,and 11621062.
文摘As conducting an impact hammer testing during experimental modal analysis,the multiple impact phenomenon must be avoided.It is generally recognized that the multiple impact phenomenon is induced by the tester’s improper operation and can be avoided through more careful operation.This study theoretically and numerically investigates the whole process of the dynamical interaction between the hammer tip and the impacted structure and discovers the intrinsically physical mechanism of the multiple impact phenomenon.The determination of the interacting process comes down to solve two sets of governing differential equations alternately,and the effectiveness of the theoretical analysis is validated by numerical simulations.Four dimensionless parameters governing the interacting process are recognized in the theoretical framework.The critical stiffness ratio for a given impacted location and the critical impacted location for a given stiffness ratio are analytically determined.These results can guide impact hammer testing to avoid the occurrence of multiple impact by suggesting the hammer tip and impacted locations.
文摘The ceramics industry,resulting from developments of modern compounds,is a segment of great influence in worldwide sustainability.Artisanal ceramic factories based on wood combustion have significant risks for the creation and discharge of atmosphere nanoparticles(NPs)and ultra-fine particles(UFPs).At present,there is insufficient recognition on the influence of engineered-NPs on the atmosphere and health.Real improvements are indispensable to diminish contact with NPs.The present study demonstrates the main NPs and UFPS present in an area of intense artisanal wood-combustion ceramic manufacturing.Particulate matter was sampled for morphological,chemical,and geochemical studies by sophisticated electron microbeam microscopy,X-Ray Diffraction,and Raman spectroscopy.From NPs configuration(<10 nm)we identify nucleation.Several amorphous NPs(>10 nm)were produced around the studied artisanal ceramic factories.This study presents an indication of the recent information on population and work-related contact to NPs in the artisanal ceramic factories and their influence on health.
基金The research reported in this manuscript was funded by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA20030301)the International Partnership Program of the Chinese Academy of Sciences(Grant No.131551KYSB20180042)+1 种基金“Belt&Road”international cooperation team for the“Light of West”program of CAS(Su Lijun),Sichuan Science and Technology Program(Grant No.2021YJ0040)CAS“Light of West China”Program(Grant No.E0R2160).
文摘Theperformanceof a structurally dissipating rock-shed(SDR)depends largely onthecapacityofitsenergy dissipators.At present,mostenergy dissipatorsare made of metals,which dissipateenergy by unrecoverable plastic deformation.Therefore,they are not able to recover their energy-dissipation capacity after deformation under rockfall impact.However,a rockfall usually disintegrates into pieces when it rolls down from a higher position and results in multiple rockfall impacts.An energy dissipator with self-recovery capability is therefore more suitable for ensuring the safety of SDRs.Replacing metal with polyurethane(a hyperelastic material with remarkable self-recovery capability)can provide self-recovery capability for energy dissipators,making them more suitable for resisting multiple rockfall impacts.In this work,polyurethane was manufactured into twotypes ofenergy dissipators:cylindrical and cubical.Full-scale falling rock impact testsand dynamic numerical simulationswereconducted to study the mechanical response of the energy dissipators.In addition,in order to ensure the accuracy of the simulation,the dynamic mechanical properties of the polyurethanewere tested and its dynamic constitutive model was established.The experimental and simulation tests have clarified the advantages of the polyurethane energy dissipator.We also summarized the practical considerations in the design of energy dissipators.
基金supported by National Natural Science Foundation of China (10872100,11072118)Natural Science Foundation of Zhejiang(Y12A020008)
文摘The dynamic compressive behavior and constitutive relations of Lanthanum（La） metal was determined by using the first compression in split Hopkinson pressure bar（SHPB） tests at different strain rates and temperatures.The constitutive relation of La metal determined in a certain range of strains was employed and adjusted in numerically simulating large deformations of La metal specimens generated by multi-compression in SHPB tests and recorded by a high-speed camera.The dynamic compressive behavior and constitutive relations of La metal under multiple SHPB tests loading was also revealed.The results of scanning electron microscope（SEM） investigation of the recovered La metal specimens for typical tests showed that there was a variety of deformation microstructures depending on strain rate,temperature and stress state.
基金supported by the National Natural Science Foundation of China (Grant Nos.52106114,51725602,and 52036006)。
文摘Droplet-based high heat flux dissipation technique under multi-gravitational environments has gained increasing research attention due to the increased requirements of heat dissipation in advanced air-/space-borne electronics.In this paper,a threedimensional model was developed to investigate the impact of continuous droplets on liquid film under various Weber numbers and gravity loads.In other words,the effects of Weber number and gravity load on the flow and heat transfer characteristics were investigated.The results demonstrated that the dissipated heat flux was positively correlated with both Weber number and gravity load.A large Weber number indicated larger kinetic energy of a droplet,leading to a greater disturbance on the impacted film area.When the Weber number was doubled,the average wall heat flux could be enhanced by 36.3%.In addition,the heat flux could be boosted by 5.4%when the gravity load ranged from 0 to 1g.Moreover,a weightless condition suppressed the vapor escape rates on the heating wall where the volume fraction of the vapor on the wall could increase by 20%under 0g,leading to deteriorated heat transfer performance.The novelty in this paper lies in the accurate three-dimensional modeling of an aerospaceoriented droplet impacting two-phase heat transfer and fluid dynamics,associating macro-scale thermal performance to microscale thermophysics mechanisms.The findings of this study could guide the development of aerospace-borne spray cooling facilities for advanced aerospace thermal management.
