Combined with the advanced drilling of the central return air shaft in Kekegai Coal Mine,the distribution law of slag discharge flow field by drilling method and the influencing factors of slag discharge effect are st...Combined with the advanced drilling of the central return air shaft in Kekegai Coal Mine,the distribution law of slag discharge flow field by drilling method and the influencing factors of slag discharge effect are studied.Firstly,the numerical model of gas–liquid–solid coupling slag discharge is established by CFD-DEM(computational fluid dynamics coupled discrete element method).Then,the flow field distribution law of the site slag outlet layout model and the optimization model is compared and analyzed.Finally,the influence of drilling parameters on slag discharge effect is studied.The results show that the best arrangement of slag suction ports is:the number is two,the length-diameter ratio is 0.4,the area ratio is 1,and the total area ratio is 1.94%.The fluid movement at the bottom of the well is mainly tangential flow,while the fluid in the slag discharge pipe is mainly axial flow.The construction parameters of efficient slag discharge are put forward:bit rotation speed is 8.7 r/min,gas injection rate is 4200 m^(3)/h,air duct sinking ratio is 0.84,and mud viscosity is 165 MPa·s.The research results can provide useful theoretical reference for large-scale sinking construction in deep wells.展开更多
This study calculates the combustion characteristics of various gas-generating and micro gas pyrotechnic charges,including aluminium/potassium perchlorate,boron/potassium nitrate,carbon black/potassium nitrate,and sil...This study calculates the combustion characteristics of various gas-generating and micro gas pyrotechnic charges,including aluminium/potassium perchlorate,boron/potassium nitrate,carbon black/potassium nitrate,and silicon-based delay compositions,using thermodynamic software.A multiphase flowthermal-solid coupling model was established,and the combustion process of the pyrotechnic charges within a closed bomb was simulated.The pyrotechnic shock generated by combustion was predicted.The combustion pressures and pyrotechnic shocks were measured.The simulation results demonstrated good agreement with experimental results.Additionally,the mechanism of shock generation by the combustion of pyrotechnic charges in the closed bomb was analyzed.The effects of the combustion characteristics of the pyrotechnic charges on the resulting pyrotechnic shocks were systematically investigated.Notably,the shock response spectrum of the gas-generating pyrotechnic charges is greater than that of the micro gas compositions at most frequencies,particularly in the mid-field pyrotechnic shocks(3-10 kHz).Furthermore,the pyrotechnic shocks increase approximately linearly with the impulse of the gas-generating pyrotechnic charges.展开更多
As is known, high-level radioactive waste （HLW） is commonly heat-emitting. Heat output from HLWwilldissipate through the surrounding rocks and induce complex thermo-hydro-mechanical-chemical（THMC） processes. In hi...As is known, high-level radioactive waste （HLW） is commonly heat-emitting. Heat output from HLWwilldissipate through the surrounding rocks and induce complex thermo-hydro-mechanical-chemical（THMC） processes. In highly consolidated clayey rocks, thermal effects are particularly significantbecause of their very low permeability and water-saturated state. Thermal impact on the integrity of thegeological barriers is of most importance with regard to the long-term safety of repositories. This studyfocuses on numerical analysis of thermal effects on hydro-mechanical properties of clayey rock using acoupled thermo-mechanical multiphase flow （TH2M） model which is implemented in the finite elementprogramme OpenGeoSys （OGS）. The material properties of the numerical model are characterised by atransversal isotropic elastic model based on Hooke＇s law, a non-isothermal multiphase flow model basedon van Genuchten function and Darcy＇s law, and a transversal isotropic heat transport model based onFourier＇s law. In the numerical approaches, special attention has been paid to the thermal expansion ofthree different phases： gas, fluid and solid, which could induce changes in pore pressure and porosity.Furthermore, the strong swelling and shrinkage behaviours of clayey material are also considered in thepresent model. The model has been applied to simulate a laboratory heating experiment on claystone.The numerical model gives a satisfactory representation of the observed material behaviour in thelaboratory experiment. The comparison of the calculated results with the laboratory findings verifies thatthe simulation with the present numerical model could provide a deeper understanding of the observedeffects. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
Most coal reservoirs show high gas content with relatively low desorption efficiency,which restricts the efficiency of coalbed methane(CBM)extraction and single-well productivity.This review highlights the desorption ...Most coal reservoirs show high gas content with relatively low desorption efficiency,which restricts the efficiency of coalbed methane(CBM)extraction and single-well productivity.This review highlights the desorption hysteresis mechanism and its controlling factors as well as methods and models to reveal desorption hysteresis and potential solutions.Methane adsorption and desorption can be recorded by both gravimetric and volumetric experiments.Although different adsorption models are used,desorption is generally considered with the Langmuir model.Desorption hysteresis is influenced by the petrophysical composition,thermal maturity,pore structure distribution of the coal,reservoir temperature,and moisture and water content.Methods for calculating desorption hysteresis include the area index,hysteresis index and introduction of a hysteresis factor and a hysteresis coefficient.Molecular dynamics simulations of methane desorption are mainly based on theories of kinetics,thermodynamics,and potential energy.The interaction forces operating among coal,water,and methane molecules can be calculated from microscopic intermolecular forces(van der Waals forces).The desorption hysteresis mechanism and desorption process still lack quantitative probe methodologies,and future research should focus on coal wettability under the constraints of liquid content,potential energy adjustment mechanism,and quantitative analysis of methane desorption rates.Further research is expected to reveal the desorption kinetics of methane through the use of the solid–liquid–gas three-phase coupling theory associated with the quantitative analysis of methane desorption hysteresis,thereby enhancing the recovery rate and efficiency of CBM wells.展开更多
基金supported by the National Natural Science Foundation of China(52174104 and 51674006)Key R&D projects in Anhui Province(202004a07020034)the Graduate Innovation Fund of Anhui University of Science and Technology(2023cx2053and2023cx1006)。
文摘Combined with the advanced drilling of the central return air shaft in Kekegai Coal Mine,the distribution law of slag discharge flow field by drilling method and the influencing factors of slag discharge effect are studied.Firstly,the numerical model of gas–liquid–solid coupling slag discharge is established by CFD-DEM(computational fluid dynamics coupled discrete element method).Then,the flow field distribution law of the site slag outlet layout model and the optimization model is compared and analyzed.Finally,the influence of drilling parameters on slag discharge effect is studied.The results show that the best arrangement of slag suction ports is:the number is two,the length-diameter ratio is 0.4,the area ratio is 1,and the total area ratio is 1.94%.The fluid movement at the bottom of the well is mainly tangential flow,while the fluid in the slag discharge pipe is mainly axial flow.The construction parameters of efficient slag discharge are put forward:bit rotation speed is 8.7 r/min,gas injection rate is 4200 m^(3)/h,air duct sinking ratio is 0.84,and mud viscosity is 165 MPa·s.The research results can provide useful theoretical reference for large-scale sinking construction in deep wells.
文摘This study calculates the combustion characteristics of various gas-generating and micro gas pyrotechnic charges,including aluminium/potassium perchlorate,boron/potassium nitrate,carbon black/potassium nitrate,and silicon-based delay compositions,using thermodynamic software.A multiphase flowthermal-solid coupling model was established,and the combustion process of the pyrotechnic charges within a closed bomb was simulated.The pyrotechnic shock generated by combustion was predicted.The combustion pressures and pyrotechnic shocks were measured.The simulation results demonstrated good agreement with experimental results.Additionally,the mechanism of shock generation by the combustion of pyrotechnic charges in the closed bomb was analyzed.The effects of the combustion characteristics of the pyrotechnic charges on the resulting pyrotechnic shocks were systematically investigated.Notably,the shock response spectrum of the gas-generating pyrotechnic charges is greater than that of the micro gas compositions at most frequencies,particularly in the mid-field pyrotechnic shocks(3-10 kHz).Furthermore,the pyrotechnic shocks increase approximately linearly with the impulse of the gas-generating pyrotechnic charges.
基金supported by BMWi (Bundesministerium für Wirtschaft und Energie,Berlin)
文摘As is known, high-level radioactive waste （HLW） is commonly heat-emitting. Heat output from HLWwilldissipate through the surrounding rocks and induce complex thermo-hydro-mechanical-chemical（THMC） processes. In highly consolidated clayey rocks, thermal effects are particularly significantbecause of their very low permeability and water-saturated state. Thermal impact on the integrity of thegeological barriers is of most importance with regard to the long-term safety of repositories. This studyfocuses on numerical analysis of thermal effects on hydro-mechanical properties of clayey rock using acoupled thermo-mechanical multiphase flow （TH2M） model which is implemented in the finite elementprogramme OpenGeoSys （OGS）. The material properties of the numerical model are characterised by atransversal isotropic elastic model based on Hooke＇s law, a non-isothermal multiphase flow model basedon van Genuchten function and Darcy＇s law, and a transversal isotropic heat transport model based onFourier＇s law. In the numerical approaches, special attention has been paid to the thermal expansion ofthree different phases： gas, fluid and solid, which could induce changes in pore pressure and porosity.Furthermore, the strong swelling and shrinkage behaviours of clayey material are also considered in thepresent model. The model has been applied to simulate a laboratory heating experiment on claystone.The numerical model gives a satisfactory representation of the observed material behaviour in thelaboratory experiment. The comparison of the calculated results with the laboratory findings verifies thatthe simulation with the present numerical model could provide a deeper understanding of the observedeffects. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
基金supported by the National Natural Science Foundation of China(Grant Nos.42072194 and U1910205)the Fundamental Research Funds for the Central Universities(Nos.800015Z1190 and 2021YJSDC02)。
文摘Most coal reservoirs show high gas content with relatively low desorption efficiency,which restricts the efficiency of coalbed methane(CBM)extraction and single-well productivity.This review highlights the desorption hysteresis mechanism and its controlling factors as well as methods and models to reveal desorption hysteresis and potential solutions.Methane adsorption and desorption can be recorded by both gravimetric and volumetric experiments.Although different adsorption models are used,desorption is generally considered with the Langmuir model.Desorption hysteresis is influenced by the petrophysical composition,thermal maturity,pore structure distribution of the coal,reservoir temperature,and moisture and water content.Methods for calculating desorption hysteresis include the area index,hysteresis index and introduction of a hysteresis factor and a hysteresis coefficient.Molecular dynamics simulations of methane desorption are mainly based on theories of kinetics,thermodynamics,and potential energy.The interaction forces operating among coal,water,and methane molecules can be calculated from microscopic intermolecular forces(van der Waals forces).The desorption hysteresis mechanism and desorption process still lack quantitative probe methodologies,and future research should focus on coal wettability under the constraints of liquid content,potential energy adjustment mechanism,and quantitative analysis of methane desorption rates.Further research is expected to reveal the desorption kinetics of methane through the use of the solid–liquid–gas three-phase coupling theory associated with the quantitative analysis of methane desorption hysteresis,thereby enhancing the recovery rate and efficiency of CBM wells.
