In the multilayer film-substrate system,thermal stress concentration and stress mutations cause film buckling,delamination and cracking,leading to device failure.In this paper,we investigated a multilayer film system ...In the multilayer film-substrate system,thermal stress concentration and stress mutations cause film buckling,delamination and cracking,leading to device failure.In this paper,we investigated a multilayer film system composed of a substrate and three film layers.The thermal stress distribution inside the structure was calculated by the finite element method,revealing significant thermal stress differences between the layers.This is mainly due to the mismatch of the coefficient of thermal expansion between materials.Different materials respond differently to changes in external temperature,leading to compression between layers.There are obvious thermal stress concentration points at the corners of the base layer and the transition layer,which is due to the sudden change of the shape at the geometric section of the structure,resulting in a sudden increase in local stress.To address this issue,we chamfered the substrate and added an intermediate layer between the substrate and the transition layer to assess whether these modifications could reduce or eliminate the thermal stress concentration points and extend the service life of the multilayer structure.The results indicate that chamfering and adding the intermediate layer effectively reduce stress discontinuities and mitigate thermal stress concentration points,thereby improving interlayer bonding strength.展开更多
In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative ro...In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative rotary shear system(RSS)to address these deficiencies through controlled mandrel rotation and cooling rates.We successfully prepared self-reinforced HDPE pipes with a three-layer structure combining spherical and shish-kebab crystals.Rotational processing aligned the molecular chains in the ring direction and formed shish-kebab crystals.As a result,the annular tensile strength of the rotationally processed three-layer shish-kebab structure(TSK)pipe increased from 26.7 MPa to 76.3 MPa,an enhancement of 185.8%.Notably,while maintaining excellent tensile strength(73.4 MPa),the elongation at break of the spherulite shishkebab spherulite(SKS)tubes was improved to 50.1%,as compared to 33.8%in the case of shish-kebab spherulite shish-kebab(KSK)tubes.This improvement can be attributed to the changes in the micro-morphology and polymer structure within the SKS tubes,specifically due to the formation of small-sized shish-kebab crystals and the low degrees of interlocking.In addition,2D-SAXS analysis revealed that KSK tubes have higher tensile strength due to smaller crystal sizes and larger shish dimensions,forming dense interlocking structures.In contrast,the SKS and TSK tubes had thicker amorphous regions and smaller shish sizes,resulting in reduced interlocking and mechanical performance.展开更多
Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In orde...Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.展开更多
The ultrastructure of the blepharoplast and the multilayered structure (MLS) in the fern Osmunda cinnamomea var. asiatica Fernald have been studied by electron microscopy with respect to spermatogenesis. The blepharop...The ultrastructure of the blepharoplast and the multilayered structure (MLS) in the fern Osmunda cinnamomea var. asiatica Fernald have been studied by electron microscopy with respect to spermatogenesis. The blepharoplast appears in the young spermatid. The differentiating blepharoplast is approximately a spherical body, which is composed of densely stained granular material in the center and some cylinders outside of it. The differentiated blepharoplast is also a sphere, but without the densely stained material in the center, consisting of scattered or radially arranged cylinders. The MLS seen in the spermatid lies between the basal bodies and the giant mitochondrion. In the early developmental stage, the MLS only consists of lamellar layers, each of which runs parallel to one another and forms a strip. In the mid stage, the MLS is composed of the microtubular ribbon (MTr), the lamellar layers and a layer of plaque. In the late stage, the MLS forms accessory band, osmiophilic crest and a layer of osmiophilic material. The MTr grows out from the MLS and extends along the surface of the nucleus to unite with the nuclear envelope in a complex. The basal body coming from the cylinder produces the axoneme of the flagella in the distal end and the wedge-shaped structure in the proximal end, respectively. In the present study, the ultrastructural features of blepharoplast and the MLS of the protoleptosporangiopsida fern, O. cinnamomea var. asiatica, have been described and compared with those of other kinds of pteridophytes in detail. The lamellar layers appearing before the formation of the MTr was found and reported for the first time.展开更多
In this paper,a compact defected ground structure loaded ultra high frequency dual-band bandpass flter is designed and implemented based on multilayer liquid crystal polymer technology.This novel filter is simply comp...In this paper,a compact defected ground structure loaded ultra high frequency dual-band bandpass flter is designed and implemented based on multilayer liquid crystal polymer technology.This novel filter is simply composed with several lumped and semi-lumped elements,to create a dual-passband response.In order to enhance the out-of-band rejection,a feedback capacitor C_(z) at the in/out ports of the filter is introduced,and four transmission zeros(TZs)are obtained outside the pass band.Furthermore,the position of TZs can be determined by adjusting the value of C_(z).The schematic and design process of the filter are given in this paper.The center frequencies of dual-band bandpass filter are 0.9 GHz and 2.45 GHz,and the 3-dB bandwidths are 13.7%and 14.3%,respectively.The circuit size is 11 mm×9.5 mm×0.193 mm.The proposed filter has been fabricated and tested,and the measured result is in good agreement with the simulation result.展开更多
In this study, electrodeposition and thermal decomposition were alternatively used for the fabrication of a series of novel multilayer-structured SnO_2–Sb–Ce/Ti(SSCT) electrodes, and their physiochemical and electro...In this study, electrodeposition and thermal decomposition were alternatively used for the fabrication of a series of novel multilayer-structured SnO_2–Sb–Ce/Ti(SSCT) electrodes, and their physiochemical and electrochemical properties were investigated for electrochemical oxidation of tetracycline(TC) in aqueous medium.Experimentally, after the SnO_2–Sb–Ce(SSC) composite was electrodeposited for 120 s on the titanium substrate in aqueous solution, the outer thermal coatings composed of SSC were synthesized by a hydrothermal method.Both influences of electrodeposition time(T_(ed)) and thermal decomposition time(Ttd) were investigated to obtain the optimum preparation. It was found that when increasing T_(ed)to a certain extent a longer lifetime of electrode can be achieved, which was attributed to a more solid interlayer structure. A notable SSCTT_(ed),Ttdelectrode,i.e., SSCT3,10, which was prepared through three times of 120 s' electrodeposition(T_(ed)= 3) and ten times of thermal decomposition(Ttd= 10) obtained the highest oxygen evolution potential 3.141 V vs. SCE. In this selected electrode, when 10 mg·L^(-1) initial TC concentration was added to this wastewater, the highest color removal efficiency and mineralization rate of TC were 72.4% and 41.6%, respectively, with an applied electricity density of 20 m A·cm^(-2) and treatment time of 1 h. These results presented here demonstrate that the combined application of electrodeposition and thermal decomposition is effective in realization of enhanced electrocatalytic oxidation activity.展开更多
V/Ag multilayers with different periodic thicknesses were fabricated by magnetron sputtering deposition. The columnar structure and the orientation relationship of the multilayers were investigated by transmission ele...V/Ag multilayers with different periodic thicknesses were fabricated by magnetron sputtering deposition. The columnar structure and the orientation relationship of the multilayers were investigated by transmission electron microscopy, high resolution transmission electron microscopy, selected-area electron diffraction and X-ray diffraction. It was found that the multilayered structure became flatter as increasing individual layer thickness from 2 to 6 nm, and then became waved as the individual layer thickness increases to 8 nm. At the beginning of the growth, the morphology of the multilayers with small periodic thickness was influenced mainly by thermodynamic instabilities, and the morphology of the multilayers with larger periodic thickness was mainly influenced mainly by the columnar growth of V. When the waved interfaces were formed, the continuum growth of the multilayers was also influenced by the shadowing effect and the finite atomic size effect. All of these factors resulted in the columnar structure of the multilayers. Multilayers with small periodic thickness presented strong orientation relationship. Nano-hardness tests indicated that multilayers with flat sublayer morphology and clear interfaces exhibited larger hardness.展开更多
The formalization of multilayer networks allows for new ways to measure sociality in complex social systems,including groups of animals.The same mathematical representation and methods are widely applicable across fie...The formalization of multilayer networks allows for new ways to measure sociality in complex social systems,including groups of animals.The same mathematical representation and methods are widely applicable across fields and study systems,and a network can represent drastically different types of data.As such,in order to apply analyses and interpret the results in a meaningful way the researcher must have a deep understanding of what their network is representing and what parts of it are being measured by a given analysis.Multilayer social networks can represent social structure with more detail than is often present in single layer networks,including multiple"types"of individuals,interactions,or relationships,and the extent to which these types are interdependent.Multilayer networks can also encompass a wider range of social scales,which can help overcome complications that are inherent to measuring sociality.In this paper,I dissect multilayer networks into the parts that correspond to different components of social structures.I then discuss common pitfalls to avoid across different stages of multilayer network analyses-some novel and some that always exist in social network analysis but are magnified in multi-layer representations.This paper serves as a primer for building a customized toolkit of multilayer network analyses,to probe components of social structure in animal social systems.展开更多
The Fe/Pt multilayer films with different structures were deposited by RF magnetron sputtering on glass substrates, and the L10-FePt films were obtained after the asdeposited samples were subjected to vacuum annealing...The Fe/Pt multilayer films with different structures were deposited by RF magnetron sputtering on glass substrates, and the L10-FePt films were obtained after the asdeposited samples were subjected to vacuum annealing at various temperatures. Results show that the Fe/Pt multilayer structure can effectively reduce the ordering temperature of FePt film, and the in-plane coercivity of [Fe （5.2 nm）/Pt （5.2 nm）]7 multilayers can reach 161.2 kA/m after annealed at 350℃ for 30 min. When Fe and Pt layer thickness is equal, the coercivity of the film is the largest. On the other hand, the different Fe-Pt crystalline phases such as Fe3Pt and FePt3 phases are formed after annealing when the thickness ratio of Fe/Pt deviates from 1 after annealing. When Fe and Pt have the same thickness, the thinner single layer gets the lower ordering temperature and the larger coercivity.展开更多
Hot compression was performed on a multilayered Au−20Sn eutectic alloy to investigate the deformation behavior and microstructure evolution.During hot compression,microstructural spheroidization was initiated from pla...Hot compression was performed on a multilayered Au−20Sn eutectic alloy to investigate the deformation behavior and microstructure evolution.During hot compression,microstructural spheroidization was initiated from plastic instability regions,and it was preferentially activated in vertical lamellae with a growth direction parallel to the compressive direction.Continuous dynamic recrystallization associated with lattice dislocations was the mechanism in both AuSn and Au5Sn multilayers.After spheroidization,strain accumulations were weakened in both of the equiaxed phases,and the deformation mechanism was substantially replaced by grain boundary sliding and migration.Based on these findings,hot rolling was conducted on an as-cast Au−20Sn alloy and a foil with a thickness of~50μm was successfully prepared.The present study can promote the development of Au−20Sn foils,and provide insights into the deformation behavior and microstructure evolution of multilayered eutectic alloys.展开更多
Lightweight,scalable,mechanically flexible conductive polymer composite was always desirable for electromagnetic interference(EMI)shielding applications.In this work,we showcased a novel approach to the superior EMI s...Lightweight,scalable,mechanically flexible conductive polymer composite was always desirable for electromagnetic interference(EMI)shielding applications.In this work,we showcased a novel approach to the superior EMI shielding composite materials by orchestrating the multilayered structure and synergistic system.The asymmetric structure with the carbonyl irons(CI)-rich Ti_(3)C_(2)T_(x)/poly(vinylidene fluoride)(PVDF)magneto-electric layer jointly behind the Ti_(3)C_(2)T_(x) nanosheets filled PVDF layer was designed and fabricated with the aid of a facile but efficient magnetic field-induced method and was then hotpressed into a multilayer structured film.Ti_(3)C_(2)T_(x) nanosheets were excluded by CI agglomeration layer in the asymmetric film to form the complete 3D electrical conductive skeletons.Based on this strategy,EMI shielding properties of the asymmetric multilayer structured composite was superior to the homogeneous blend and sandwiched or alternating layered composites.In addition,an increase in CI content in the composite referred to the thickening of CI-rich layers,making it gain the most powerful EMI SE values,i.e.42.8 d B for DCMP20–10 film(20 wt%CI,10 wt%Ti_(3)C_(2)T_(x))at a thickness of 0.4 mm.More importantly,the composite transformed from a reflection type to an absorption dominating EMI shielding material due to the multireflections and magneto-electric synergism in the CI-rich Ti_(3)C_(2)T_(x)/PVDF layers.Meanwhile,the EMI SE of the composites can be adjusted by increase of either theoverall thickness,or the layer numbers of m-DCMP sheets.The thickness specific EMI SE was calculated as 165.25 d B mm^(-1)for 4-sheet composite film,a record high value among the high efficiency polymer-based EMI shielding materials.This method offered an alternative protocol for preferential integration of excellent EMI shielding performance with high mechanical performance in CPC materials.展开更多
In order to improve the red luminescent properties,Sr_(2)MgSi_(2)O_(7):Eu^(2+),Dy^(3+)was selected as a blue persistent luminescent donor phosphor,while light conversion agent was utilized to tune the persistent lumin...In order to improve the red luminescent properties,Sr_(2)MgSi_(2)O_(7):Eu^(2+),Dy^(3+)was selected as a blue persistent luminescent donor phosphor,while light conversion agent was utilized to tune the persistent luminescent spectra from blue to red.Composite red luminescent material Sr_(2)MgSi_(2)O_(7):Eu^(2+),Dy^(3+)/light conversion agent(SMED/LCA)was fabricated with light conversion agent and Sr_(2)MgSi_(2)O_(7):Eu^(2+),Dy^(3+)at a certain mass ratio.SiO_(2)(Al2 O_(3) or MgF2)were coated on the surface of SMED/LCA through heterogeneous deposition method.The structural and optical characteristics of the resulting samples were launched in terms of X-ray diffraction and emission spectrum as well as afterglow brightness.The results demonstrate that the emission spectrum exhibits two emission bands,and the peaks are located at around 470 and 615 nm.SiO_(2),Al_(2)O_(3) and MgF_(2) are coated on the surface of SMED/LCA like a protective shell to maintain its stability and luminescent properties,the afterglow initial brightness is still up to 0.37 cd/m^(2) and the afterglow color purity calculated from CIE color coordinates is basically unchanged.展开更多
A Ti-BN complex cathode is made from Ti and h-BN powders by the powder metallurgy technology, and TiBN coating is obtained by plasma immersion ion implantation and deposition with this Ti-BN composite cathode. The TiB...A Ti-BN complex cathode is made from Ti and h-BN powders by the powder metallurgy technology, and TiBN coating is obtained by plasma immersion ion implantation and deposition with this Ti-BN composite cathode. The TiBN coating shows a self-forming multilayered nanocomposite structure while with relative uniform elemental distributions. High resolution transmission electron microscopy images reveal that the multilayered structure is derived from different grain sizes in the nanocomposite. Due to the existence of h-BN phase, the friction coefficient of the coating is about 0.25.展开更多
Ag/Fe multilayers with well compositional modulation periodicity of 4-60 nm were prepared at room temperature by evaporation deposition using an ultra high vacuum (UHV) chamber. Their microstructure and hardness were ...Ag/Fe multilayers with well compositional modulation periodicity of 4-60 nm were prepared at room temperature by evaporation deposition using an ultra high vacuum (UHV) chamber. Their microstructure and hardness were investigated using XRD, TEM and nanoindentation. The fcc/bcc type multilayers show a textured polycrystalline growth with Ag (111) and Fe (110) in Ag layers and Fe layers, respectively. The hardness increases with decreasing periodicity and approaches the maximum of 6.36 GPa at the periodicity of 4 nm. The peak hardness is 1.51 times mixture value. The experimental results are well explained by the dislocation-image force-based model developed by Lehoczky.展开更多
It is demonstrated that two kinds of soft X-ray spectroscopy are useful as nondestructive methods to in- vestigate multilayer structures modified by interdiffusion or by chemical reaction of adjoining layers in depth ...It is demonstrated that two kinds of soft X-ray spectroscopy are useful as nondestructive methods to in- vestigate multilayer structures modified by interdiffusion or by chemical reaction of adjoining layers in depth direc- tion. One is the total electron yield (TEY) spectroscopy involving angular dependence measurement. Using this method, it was found that in LiF/Si/LiF trilayers, the Si layers exhibited a characteristic similar to porous Si, and in CaF2/Si/CaF2 trilayers, it was found that CaF2 segregated through the Si layer. Moreover, it has been shown that the thickness of the top layer of a Mo/Si X-ray multilayer can be determined by analyzing TEY signals generated by the standing wave. The other is the soft X-ray emission spectroscopy involving spectral shape analysis. Using this method, it was found that in Mo/Si X-ray multilayers, the interdiffusion or chemical reaction giving rise to deterioration of re- flectance character occurs in as-deposited samples as well as in heated samples. In antiferromagnetic Fe/Si multilay- ers, it was confirmed that there was no existence of pure Si layers, but insulating FeSi2 layers were present. This result suggests that the source of antiferromagnetic coupling is not conduction electrons but quantum wave interference.展开更多
In this work, we have investigated the mechanical properties of Cu/Ta, Ag/Cu and Ag/Nb multilayers with different heterogeneous interfaces. The results suggest that when individual layer thickness （h） is larger than...In this work, we have investigated the mechanical properties of Cu/Ta, Ag/Cu and Ag/Nb multilayers with different heterogeneous interfaces. The results suggest that when individual layer thickness （h） is larger than 5-10 nm, the hardness/strength of three different multilayer systems has the similar length scale effect with decreasing layer thickness, while when h ≤ 5 nm, the three multilayer systems show remarkably different plastic deformation behaviors. The strength curves exhibit the variation trends of unchanging, softening and increasing corresponding to Cu/Ta, Ag/Cu and Ag/Nb multilayers, respectively. The microstructure analysis shows that three kinds of multilayers have totally different interfacial structures, which lead to the different strengthening or softening mechanisms.展开更多
Theoretical description of the wave propagation in an elliptical cylinder multilayer structure under the conditions of H polarization and E polarization is presented. A transfer matrix method has been developed for el...Theoretical description of the wave propagation in an elliptical cylinder multilayer structure under the conditions of H polarization and E polarization is presented. A transfer matrix method has been developed for elliptical cylinder waves. The formulas of reflection and transmission coefficients for an elliptical cylinder multilayer structure are driven. Reflection and transmission coefficients of elliptical cylinder waves by a single elliptical cylinder interface is presented. The obtained formulas can be generalized to the cold plasma filled structures and thus the obtained results in the limit of circular cylinder structures are investigated.展开更多
The polycrystalline Si3N4/TiN ceramic nano-multilayer films have been synthesized on Si substrates by a reactive magnetron Sputtering technique, aiming at investigating the effects of modulation ratio and modulation p...The polycrystalline Si3N4/TiN ceramic nano-multilayer films have been synthesized on Si substrates by a reactive magnetron Sputtering technique, aiming at investigating the effects of modulation ratio and modulation period on the microhardness and to elucidate the hardening mechanisms of the synthesized nanomultilayer films. The results showed that the hardness of Si3N4/TiN nano-multilayers is affected not only by modulation period, but also by modulation ratio. The hardness reaches its maximum value when modulation period equa1s a critical value λ0, which is about 12 nm with a modulation ratio of 3: 1. The maximum hardness value is about 40% higher than the value calculated from the rule of mixtures. The hardness of nano-multilayer thin films was found to decrease rapidly with increasing or decreasing modulation period from the Point of λ0. The microstructures of the nano-multilayer films have been investigated using XRD and TEM. Based on experimental results, the mechanism of the superhardness in this system was proposed.展开更多
We investigate electronic properties of a hierarchical multilayer structure consisting of stacking of barriers and wells. The structure is formed in a sequence of generations, each of which is constructed with the sam...We investigate electronic properties of a hierarchical multilayer structure consisting of stacking of barriers and wells. The structure is formed in a sequence of generations, each of which is constructed with the same pattern but with the previous generation as the basic building blocks. We calculate the transmission spectrum which shows the multifractal behavior for systems with large generation index. From the analysis of the average resistivity and the multifractal structure of the wavefunctions, we show that there exist different types of states exhibiting extended, localized and intermediate characteristics. The degree of localization is sensitive to the variation of the structural parameters.Suggestion of the possible experimental realization is discussed.展开更多
基金the support of the National Natural Science Foundation of China(Grant Nos.51606158,11604311 and 12074151)the Guangxi Science and Technology Base and Talent Special Project(Grant No.AD21075009)+2 种基金the Sichuan Science and Technology Program(Grant No.2021JDRC0022)the Open Fund of the Key Laboratory for Metallurgical Equipment and Control Technology of Ministry of Education in Wuhan University of Science and Technology,People's Republic of China(Grant Nos.MECOF2022B01 and MECOF2023B04)the Guangxi Key Laboratory of Precision Navigation Technology and Application,Guilin University of Electronic Technology(Grant No.DH202321)。
文摘In the multilayer film-substrate system,thermal stress concentration and stress mutations cause film buckling,delamination and cracking,leading to device failure.In this paper,we investigated a multilayer film system composed of a substrate and three film layers.The thermal stress distribution inside the structure was calculated by the finite element method,revealing significant thermal stress differences between the layers.This is mainly due to the mismatch of the coefficient of thermal expansion between materials.Different materials respond differently to changes in external temperature,leading to compression between layers.There are obvious thermal stress concentration points at the corners of the base layer and the transition layer,which is due to the sudden change of the shape at the geometric section of the structure,resulting in a sudden increase in local stress.To address this issue,we chamfered the substrate and added an intermediate layer between the substrate and the transition layer to assess whether these modifications could reduce or eliminate the thermal stress concentration points and extend the service life of the multilayer structure.The results indicate that chamfering and adding the intermediate layer effectively reduce stress discontinuities and mitigate thermal stress concentration points,thereby improving interlayer bonding strength.
基金supported by the National Natural Science Foundation of China(Nos.52373045 and 52033005).
文摘In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative rotary shear system(RSS)to address these deficiencies through controlled mandrel rotation and cooling rates.We successfully prepared self-reinforced HDPE pipes with a three-layer structure combining spherical and shish-kebab crystals.Rotational processing aligned the molecular chains in the ring direction and formed shish-kebab crystals.As a result,the annular tensile strength of the rotationally processed three-layer shish-kebab structure(TSK)pipe increased from 26.7 MPa to 76.3 MPa,an enhancement of 185.8%.Notably,while maintaining excellent tensile strength(73.4 MPa),the elongation at break of the spherulite shishkebab spherulite(SKS)tubes was improved to 50.1%,as compared to 33.8%in the case of shish-kebab spherulite shish-kebab(KSK)tubes.This improvement can be attributed to the changes in the micro-morphology and polymer structure within the SKS tubes,specifically due to the formation of small-sized shish-kebab crystals and the low degrees of interlocking.In addition,2D-SAXS analysis revealed that KSK tubes have higher tensile strength due to smaller crystal sizes and larger shish dimensions,forming dense interlocking structures.In contrast,the SKS and TSK tubes had thicker amorphous regions and smaller shish sizes,resulting in reduced interlocking and mechanical performance.
基金the Shaanxi Provincial Key Research and Development Program(No.2020GY-040)。
文摘Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.
文摘The ultrastructure of the blepharoplast and the multilayered structure (MLS) in the fern Osmunda cinnamomea var. asiatica Fernald have been studied by electron microscopy with respect to spermatogenesis. The blepharoplast appears in the young spermatid. The differentiating blepharoplast is approximately a spherical body, which is composed of densely stained granular material in the center and some cylinders outside of it. The differentiated blepharoplast is also a sphere, but without the densely stained material in the center, consisting of scattered or radially arranged cylinders. The MLS seen in the spermatid lies between the basal bodies and the giant mitochondrion. In the early developmental stage, the MLS only consists of lamellar layers, each of which runs parallel to one another and forms a strip. In the mid stage, the MLS is composed of the microtubular ribbon (MTr), the lamellar layers and a layer of plaque. In the late stage, the MLS forms accessory band, osmiophilic crest and a layer of osmiophilic material. The MTr grows out from the MLS and extends along the surface of the nucleus to unite with the nuclear envelope in a complex. The basal body coming from the cylinder produces the axoneme of the flagella in the distal end and the wedge-shaped structure in the proximal end, respectively. In the present study, the ultrastructural features of blepharoplast and the MLS of the protoleptosporangiopsida fern, O. cinnamomea var. asiatica, have been described and compared with those of other kinds of pteridophytes in detail. The lamellar layers appearing before the formation of the MTr was found and reported for the first time.
基金the Shaanxi Provincial Innovation Team Project(No.2020TD-019)the Xi'an Sciences Plan Project(No.2021XJZZ0075)。
文摘In this paper,a compact defected ground structure loaded ultra high frequency dual-band bandpass flter is designed and implemented based on multilayer liquid crystal polymer technology.This novel filter is simply composed with several lumped and semi-lumped elements,to create a dual-passband response.In order to enhance the out-of-band rejection,a feedback capacitor C_(z) at the in/out ports of the filter is introduced,and four transmission zeros(TZs)are obtained outside the pass band.Furthermore,the position of TZs can be determined by adjusting the value of C_(z).The schematic and design process of the filter are given in this paper.The center frequencies of dual-band bandpass filter are 0.9 GHz and 2.45 GHz,and the 3-dB bandwidths are 13.7%and 14.3%,respectively.The circuit size is 11 mm×9.5 mm×0.193 mm.The proposed filter has been fabricated and tested,and the measured result is in good agreement with the simulation result.
基金Supported by the National Natural Science Foundation of China(U1510120)the International Academic Cooperation and Exchange Program of Shanghai Science and Technology Committee(14520721900)
文摘In this study, electrodeposition and thermal decomposition were alternatively used for the fabrication of a series of novel multilayer-structured SnO_2–Sb–Ce/Ti(SSCT) electrodes, and their physiochemical and electrochemical properties were investigated for electrochemical oxidation of tetracycline(TC) in aqueous medium.Experimentally, after the SnO_2–Sb–Ce(SSC) composite was electrodeposited for 120 s on the titanium substrate in aqueous solution, the outer thermal coatings composed of SSC were synthesized by a hydrothermal method.Both influences of electrodeposition time(T_(ed)) and thermal decomposition time(Ttd) were investigated to obtain the optimum preparation. It was found that when increasing T_(ed)to a certain extent a longer lifetime of electrode can be achieved, which was attributed to a more solid interlayer structure. A notable SSCTT_(ed),Ttdelectrode,i.e., SSCT3,10, which was prepared through three times of 120 s' electrodeposition(T_(ed)= 3) and ten times of thermal decomposition(Ttd= 10) obtained the highest oxygen evolution potential 3.141 V vs. SCE. In this selected electrode, when 10 mg·L^(-1) initial TC concentration was added to this wastewater, the highest color removal efficiency and mineralization rate of TC were 72.4% and 41.6%, respectively, with an applied electricity density of 20 m A·cm^(-2) and treatment time of 1 h. These results presented here demonstrate that the combined application of electrodeposition and thermal decomposition is effective in realization of enhanced electrocatalytic oxidation activity.
基金the National Natural Science Foundation of China(Nos.91026014 and 11175133)the Foundations from Chinese Ministry of Education(Nos.2011014113004 and NCET-13-0438)the Hubei Provincial Natural Science Foundation(No.2012FFA042) for financial support
文摘V/Ag multilayers with different periodic thicknesses were fabricated by magnetron sputtering deposition. The columnar structure and the orientation relationship of the multilayers were investigated by transmission electron microscopy, high resolution transmission electron microscopy, selected-area electron diffraction and X-ray diffraction. It was found that the multilayered structure became flatter as increasing individual layer thickness from 2 to 6 nm, and then became waved as the individual layer thickness increases to 8 nm. At the beginning of the growth, the morphology of the multilayers with small periodic thickness was influenced mainly by thermodynamic instabilities, and the morphology of the multilayers with larger periodic thickness was mainly influenced mainly by the columnar growth of V. When the waved interfaces were formed, the continuum growth of the multilayers was also influenced by the shadowing effect and the finite atomic size effect. All of these factors resulted in the columnar structure of the multilayers. Multilayers with small periodic thickness presented strong orientation relationship. Nano-hardness tests indicated that multilayers with flat sublayer morphology and clear interfaces exhibited larger hardness.
文摘The formalization of multilayer networks allows for new ways to measure sociality in complex social systems,including groups of animals.The same mathematical representation and methods are widely applicable across fields and study systems,and a network can represent drastically different types of data.As such,in order to apply analyses and interpret the results in a meaningful way the researcher must have a deep understanding of what their network is representing and what parts of it are being measured by a given analysis.Multilayer social networks can represent social structure with more detail than is often present in single layer networks,including multiple"types"of individuals,interactions,or relationships,and the extent to which these types are interdependent.Multilayer networks can also encompass a wider range of social scales,which can help overcome complications that are inherent to measuring sociality.In this paper,I dissect multilayer networks into the parts that correspond to different components of social structures.I then discuss common pitfalls to avoid across different stages of multilayer network analyses-some novel and some that always exist in social network analysis but are magnified in multi-layer representations.This paper serves as a primer for building a customized toolkit of multilayer network analyses,to probe components of social structure in animal social systems.
基金supported by the National Natural Science Foundation of China(No.60571010)Natural Science Foundation of Hubei province.
文摘The Fe/Pt multilayer films with different structures were deposited by RF magnetron sputtering on glass substrates, and the L10-FePt films were obtained after the asdeposited samples were subjected to vacuum annealing at various temperatures. Results show that the Fe/Pt multilayer structure can effectively reduce the ordering temperature of FePt film, and the in-plane coercivity of [Fe （5.2 nm）/Pt （5.2 nm）]7 multilayers can reach 161.2 kA/m after annealed at 350℃ for 30 min. When Fe and Pt layer thickness is equal, the coercivity of the film is the largest. On the other hand, the different Fe-Pt crystalline phases such as Fe3Pt and FePt3 phases are formed after annealing when the thickness ratio of Fe/Pt deviates from 1 after annealing. When Fe and Pt have the same thickness, the thinner single layer gets the lower ordering temperature and the larger coercivity.
基金financial supports from the National Natural Science Foundation of China(Nos.U1502272,51901204)the Precious Metal Materials Genome Engineering in Yunnan Province,China(Nos.2019ZE001,202002AB080001)。
文摘Hot compression was performed on a multilayered Au−20Sn eutectic alloy to investigate the deformation behavior and microstructure evolution.During hot compression,microstructural spheroidization was initiated from plastic instability regions,and it was preferentially activated in vertical lamellae with a growth direction parallel to the compressive direction.Continuous dynamic recrystallization associated with lattice dislocations was the mechanism in both AuSn and Au5Sn multilayers.After spheroidization,strain accumulations were weakened in both of the equiaxed phases,and the deformation mechanism was substantially replaced by grain boundary sliding and migration.Based on these findings,hot rolling was conducted on an as-cast Au−20Sn alloy and a foil with a thickness of~50μm was successfully prepared.The present study can promote the development of Au−20Sn foils,and provide insights into the deformation behavior and microstructure evolution of multilayered eutectic alloys.
基金the financial grant provided by the State Key Program of National Natural Science foundation of China(Grant No.51433008)Shenzhen Science and Technology Innovation Commission(Grant No.JCYJ20160331142330969)。
文摘Lightweight,scalable,mechanically flexible conductive polymer composite was always desirable for electromagnetic interference(EMI)shielding applications.In this work,we showcased a novel approach to the superior EMI shielding composite materials by orchestrating the multilayered structure and synergistic system.The asymmetric structure with the carbonyl irons(CI)-rich Ti_(3)C_(2)T_(x)/poly(vinylidene fluoride)(PVDF)magneto-electric layer jointly behind the Ti_(3)C_(2)T_(x) nanosheets filled PVDF layer was designed and fabricated with the aid of a facile but efficient magnetic field-induced method and was then hotpressed into a multilayer structured film.Ti_(3)C_(2)T_(x) nanosheets were excluded by CI agglomeration layer in the asymmetric film to form the complete 3D electrical conductive skeletons.Based on this strategy,EMI shielding properties of the asymmetric multilayer structured composite was superior to the homogeneous blend and sandwiched or alternating layered composites.In addition,an increase in CI content in the composite referred to the thickening of CI-rich layers,making it gain the most powerful EMI SE values,i.e.42.8 d B for DCMP20–10 film(20 wt%CI,10 wt%Ti_(3)C_(2)T_(x))at a thickness of 0.4 mm.More importantly,the composite transformed from a reflection type to an absorption dominating EMI shielding material due to the multireflections and magneto-electric synergism in the CI-rich Ti_(3)C_(2)T_(x)/PVDF layers.Meanwhile,the EMI SE of the composites can be adjusted by increase of either theoverall thickness,or the layer numbers of m-DCMP sheets.The thickness specific EMI SE was calculated as 165.25 d B mm^(-1)for 4-sheet composite film,a record high value among the high efficiency polymer-based EMI shielding materials.This method offered an alternative protocol for preferential integration of excellent EMI shielding performance with high mechanical performance in CPC materials.
基金Project supported by Natural Science Foundation of Jiangsu Province(BK20171140,BK20180629)National Natural Science Foundation of China(51803076)。
文摘In order to improve the red luminescent properties,Sr_(2)MgSi_(2)O_(7):Eu^(2+),Dy^(3+)was selected as a blue persistent luminescent donor phosphor,while light conversion agent was utilized to tune the persistent luminescent spectra from blue to red.Composite red luminescent material Sr_(2)MgSi_(2)O_(7):Eu^(2+),Dy^(3+)/light conversion agent(SMED/LCA)was fabricated with light conversion agent and Sr_(2)MgSi_(2)O_(7):Eu^(2+),Dy^(3+)at a certain mass ratio.SiO_(2)(Al2 O_(3) or MgF2)were coated on the surface of SMED/LCA through heterogeneous deposition method.The structural and optical characteristics of the resulting samples were launched in terms of X-ray diffraction and emission spectrum as well as afterglow brightness.The results demonstrate that the emission spectrum exhibits two emission bands,and the peaks are located at around 470 and 615 nm.SiO_(2),Al_(2)O_(3) and MgF_(2) are coated on the surface of SMED/LCA like a protective shell to maintain its stability and luminescent properties,the afterglow initial brightness is still up to 0.37 cd/m^(2) and the afterglow color purity calculated from CIE color coordinates is basically unchanged.
基金Supported by the Fund of National Key Laboratory of High Power Microwave Technology under Grant No 2014-763.xy.kthe National Natural Science Foundation of China under Grant No 21573054the Joint Funds Key Project of the National Natural Science Foundation of China under Grant No U1537214
文摘A Ti-BN complex cathode is made from Ti and h-BN powders by the powder metallurgy technology, and TiBN coating is obtained by plasma immersion ion implantation and deposition with this Ti-BN composite cathode. The TiBN coating shows a self-forming multilayered nanocomposite structure while with relative uniform elemental distributions. High resolution transmission electron microscopy images reveal that the multilayered structure is derived from different grain sizes in the nanocomposite. Due to the existence of h-BN phase, the friction coefficient of the coating is about 0.25.
基金Projects(50871060, 50772055) supported by the National Natural Science Foundation of ChinaProject(2007AA03Z426) supported by High-tech Research and Development Program of China
文摘Ag/Fe multilayers with well compositional modulation periodicity of 4-60 nm were prepared at room temperature by evaporation deposition using an ultra high vacuum (UHV) chamber. Their microstructure and hardness were investigated using XRD, TEM and nanoindentation. The fcc/bcc type multilayers show a textured polycrystalline growth with Ag (111) and Fe (110) in Ag layers and Fe layers, respectively. The hardness increases with decreasing periodicity and approaches the maximum of 6.36 GPa at the periodicity of 4 nm. The peak hardness is 1.51 times mixture value. The experimental results are well explained by the dislocation-image force-based model developed by Lehoczky.
文摘It is demonstrated that two kinds of soft X-ray spectroscopy are useful as nondestructive methods to in- vestigate multilayer structures modified by interdiffusion or by chemical reaction of adjoining layers in depth direc- tion. One is the total electron yield (TEY) spectroscopy involving angular dependence measurement. Using this method, it was found that in LiF/Si/LiF trilayers, the Si layers exhibited a characteristic similar to porous Si, and in CaF2/Si/CaF2 trilayers, it was found that CaF2 segregated through the Si layer. Moreover, it has been shown that the thickness of the top layer of a Mo/Si X-ray multilayer can be determined by analyzing TEY signals generated by the standing wave. The other is the soft X-ray emission spectroscopy involving spectral shape analysis. Using this method, it was found that in Mo/Si X-ray multilayers, the interdiffusion or chemical reaction giving rise to deterioration of re- flectance character occurs in as-deposited samples as well as in heated samples. In antiferromagnetic Fe/Si multilay- ers, it was confirmed that there was no existence of pure Si layers, but insulating FeSi2 layers were present. This result suggests that the source of antiferromagnetic coupling is not conduction electrons but quantum wave interference.
基金financially supported by the PAPD(No.50831004)the Fundamental Research Funds for the Central Universities+3 种基金the Innovation Fund of Jiangsu Province(No.BY2013072-06)the Natural Science Foundation of Jiangsu Province(No.20141234)the National Natural Science Foundation of China(Nos.51171078 and 51371096)the State Key Program for Basic Research of China(No.2010CB631004)
文摘In this work, we have investigated the mechanical properties of Cu/Ta, Ag/Cu and Ag/Nb multilayers with different heterogeneous interfaces. The results suggest that when individual layer thickness （h） is larger than 5-10 nm, the hardness/strength of three different multilayer systems has the similar length scale effect with decreasing layer thickness, while when h ≤ 5 nm, the three multilayer systems show remarkably different plastic deformation behaviors. The strength curves exhibit the variation trends of unchanging, softening and increasing corresponding to Cu/Ta, Ag/Cu and Ag/Nb multilayers, respectively. The microstructure analysis shows that three kinds of multilayers have totally different interfacial structures, which lead to the different strengthening or softening mechanisms.
文摘Theoretical description of the wave propagation in an elliptical cylinder multilayer structure under the conditions of H polarization and E polarization is presented. A transfer matrix method has been developed for elliptical cylinder waves. The formulas of reflection and transmission coefficients for an elliptical cylinder multilayer structure are driven. Reflection and transmission coefficients of elliptical cylinder waves by a single elliptical cylinder interface is presented. The obtained formulas can be generalized to the cold plasma filled structures and thus the obtained results in the limit of circular cylinder structures are investigated.
文摘The polycrystalline Si3N4/TiN ceramic nano-multilayer films have been synthesized on Si substrates by a reactive magnetron Sputtering technique, aiming at investigating the effects of modulation ratio and modulation period on the microhardness and to elucidate the hardening mechanisms of the synthesized nanomultilayer films. The results showed that the hardness of Si3N4/TiN nano-multilayers is affected not only by modulation period, but also by modulation ratio. The hardness reaches its maximum value when modulation period equa1s a critical value λ0, which is about 12 nm with a modulation ratio of 3: 1. The maximum hardness value is about 40% higher than the value calculated from the rule of mixtures. The hardness of nano-multilayer thin films was found to decrease rapidly with increasing or decreasing modulation period from the Point of λ0. The microstructures of the nano-multilayer films have been investigated using XRD and TEM. Based on experimental results, the mechanism of the superhardness in this system was proposed.
文摘We investigate electronic properties of a hierarchical multilayer structure consisting of stacking of barriers and wells. The structure is formed in a sequence of generations, each of which is constructed with the same pattern but with the previous generation as the basic building blocks. We calculate the transmission spectrum which shows the multifractal behavior for systems with large generation index. From the analysis of the average resistivity and the multifractal structure of the wavefunctions, we show that there exist different types of states exhibiting extended, localized and intermediate characteristics. The degree of localization is sensitive to the variation of the structural parameters.Suggestion of the possible experimental realization is discussed.
