1 Kristina Smithe was running the California International Marathon in 2019,drinking cups of water when thirsty,when she started to think about how much waste such events produce.On the flight home,she did the math:Th...1 Kristina Smithe was running the California International Marathon in 2019,drinking cups of water when thirsty,when she started to think about how much waste such events produce.On the flight home,she did the math:There were 9,000 runners,17 aid stations and something like 150,000 cups used once and thrown away.展开更多
Microneedles(MNs)have been extensively investigated for transdermal delivery of large-sized drugs,including proteins,nucleic acids,and even extracellular vesicles(EVs).However,for their sufficient skin penetration,con...Microneedles(MNs)have been extensively investigated for transdermal delivery of large-sized drugs,including proteins,nucleic acids,and even extracellular vesicles(EVs).However,for their sufficient skin penetration,conventional MNs employ long needles(≥600μm),leading to pain and skin irritation.Moreover,it is critical to stably apply MNs against complex skin surfaces for uniform nanoscale drug delivery.Herein,a dually amplified transdermal patch(MN@EV/SC)is developed as the stem cell-derived EV delivery platform by hierarchically integrating an octopusinspired suction cup(SC)with short MNs(≤300μm).While leveraging the suction effect to induce nanoscale deformation of the stratum corneum,MN@EV/SC minimizes skin damage and enhances the adhesion of MNs,allowing EV to penetrate deeper into the dermis.When MNs of various lengths are applied to mouse skin,the short MNs can elicit comparable corticosterone release to chemical adhesives,whereas long MNs induce a prompt stress response.MN@EV/SC can achieve a remarkable penetration depth(290μm)for EV,compared to that of MN alone(111μm).Consequently,MN@EV/SC facilitates the revitalization of fibroblasts and enhances collagen synthesis in middle-aged mice.Overall,MN@EV/SC exhibits the potential for skin regeneration by modulating the dermal microenvironment and ensuring patient comfort.展开更多
Sand-fflled splash cups were used to study the erosive power of rainfall and throughfall in the humid subtropics of Southeast China. The splash cup measurements yielded precise and reproducible results under both open...Sand-fflled splash cups were used to study the erosive power of rainfall and throughfall in the humid subtropics of Southeast China. The splash cup measurements yielded precise and reproducible results under both open field conditions and forest vegetation. The splash cups were exposed to specific forest stands of different ages and to selected species （Schima superba, Castanopsis eyrei, Daphniphyllum oldhamii, Lithocarpus glaber） in the Gutianshan （古田山） National Nature Reserve （GNNR）. The results of the measurements under forest vegetation show that the erosive power of throughfall drops to be 2.59 times higher compared to the open field. This accentuates the importance of shrub, herb and litter layers in forest ecosystems to protect the soil against erosion. Coalescing drops from leaves and branches （drips） are responsible for this notable gain in erosive power. Moreover, differences in sandloss between the investigated tree species （deciduous, evergreen） revealed that the erosion potential and the spatial heterogeneity of throughfall are species-specific. This highlights the importance of selecting specific species for afforestation projects considering the prevention of soil erosion.展开更多
Major defects in forming of conical cups are wrinkles and rupture.Hydrodynamic deep drawing assisted by radial pressure（HDDRP） is a sheet hydroforming process for production of shell cups in one step.In this work,pr...Major defects in forming of conical cups are wrinkles and rupture.Hydrodynamic deep drawing assisted by radial pressure（HDDRP） is a sheet hydroforming process for production of shell cups in one step.In this work,process window diagrams（PWDs） for Al1050-O,pure copper and DIN 1623 St14 steel are obtained for HDDRP process.The PWD is determined to provide a quick assessment of part producibility for sheet hydroforming process.Finite element method is used for this purpose considering the process parameters including pressure path,and the blank material and its thickness.Numerical results are validated by experiments.It is shown that the sheets with less initial thickness and higher strength show better formability and uniformity of thickness distribution on final product.The results demonstrate that the obtained PWD can predict appropriate forming area and probability of rupture or wrinkling occurrence under different pressure loading paths.展开更多
Hydrodynamic deep drawing assisted by radial pressure is an advanced sheet forming technology with great advantages such as higher drawing ratio, good surface quality and higher dimensional accuracy. In this process, ...Hydrodynamic deep drawing assisted by radial pressure is an advanced sheet forming technology with great advantages such as higher drawing ratio, good surface quality and higher dimensional accuracy. In this process, both the bottom surface and the peripheral edge of sheets are under hydrodynamic pressure, so that the forming procedure is more uniform with low failure probability. Multi-layered sheets with complex geometries could be formed more easily with this technique compared with other traditional methods. Rupture is the main irrecoverable failure form in sheet forming processes. Prediction of rupture occurrence is of great importance for determining and optimizing the proper process parameters. In this research, a theoretical model was proposed to calculate the critical rupture pressure in production of double layered conical parts with hydrodynamic deep drawing process assisted by radial pressure. The effects of other process parameters on critical rupture pressure, such as punch tip radius, drawing ratio, coefficient of friction, sheet thickness and material properties were also discussed. The proposed model was compared with finite element simulation and validated by experiments on Al1050/St13 double layered sheets, where a good agreement was found with analytical results.展开更多
Acetabular cups,which are among themost important implants in total hip arthroplasty,are usually made from titanium alloys with high porosity and adequate mechanical properties.The current three-dimensional(3D)printin...Acetabular cups,which are among themost important implants in total hip arthroplasty,are usually made from titanium alloys with high porosity and adequate mechanical properties.The current three-dimensional(3D)printing approaches to fabricate customized acetabular cups have some inherent disadvantages such as high cost and energy consumption,residual thermal stress,and relatively low efficiency.Thus,in this work,a direct ink writing method was developed to print a cup structure at room temperature,followed by multi-step heat treatment to form microscale porous structure within the acetabular cup.Our method is facilitated by the development of a self-supporting titanium-6 aluminum-4 vanadium(Ti64)ink that is composed of Ti64 particles,bentonite yield-stress additive,ultraviolet curable polymer,and photo-initiator.The effects of Ti64 and bentonite concentrations on the rheological properties and printability of inks were systematically investigated.Moreover,the printing conditions,geometrical limitations,and maximum curing depth were explored.Finally,some complex 3D structures,including lattices with different gap distances,honeycomb with a well-defined shape,and an acetabular cup with uniformly distributed micropores,were successfully printed/fabricated to validate the effectiveness of the proposed method.展开更多
Bacterial transfer is a concern when sharing food and drink, so to address this concern, this study examined the bacterial transfer onto and into plastic drinking cups. Two experiments were performed to: 1) test bacte...Bacterial transfer is a concern when sharing food and drink, so to address this concern, this study examined the bacterial transfer onto and into plastic drinking cups. Two experiments were performed to: 1) test bacterial transfer to the rim of a plastic drinking cup, and 2) test residual bacteria in the liquid that was consumed from the cup. Bacteria were enumerated from the cup rim and the water in the cup. The results for both types of transfer showed higher bacterial populations on cups exposed to drinking compared to those where no drinking occurred. However, there was more bacterial transfer to the rim of the plastic cup than the liquid inside the cup.展开更多
Plastic cups commonly used by communities of Uganda lose color with time as they are used. The purpose of this study was to determine the concentrations of copper, lead and chromium in drinks placed in blue and green ...Plastic cups commonly used by communities of Uganda lose color with time as they are used. The purpose of this study was to determine the concentrations of copper, lead and chromium in drinks placed in blue and green plastic cups from two companies (anonymized as A and B) in Uganda. New blue and green polyethylene plastic cups produced from unrecycled material were purchased from company A and company B while control cups of Luminarc white (Saudi Arabia) and porcelain white glazed (China) were purchased from shops in Mbarara city. The ash from the burnt blue and green plastic cups was digested using Aqua Regia. After a holding time of 30 and 60 minutes, milk and tea samples in the four different cups were also digested using Aqua Regia. Sample analysis for the supernatants was done in triplicates using an atomic absorption spectrophotometer. The ash of blue and green cups from company A was found to contain the highest concentration of heavy metals which ranged from 0.73 to 1.86 ppm for lead, 8.05 to 38.32 ppm of copper, and 655.80 to 756.57 ppm for chromium. For company B, the heavy metal concentrations ranged from 0.76 to 1.43 ppm, 5.51 to 22.85 ppm, and 756.67 to 815.25 ppm, respectively. The concentration of the leached metals ranged from 0.001 to 5.75 ppm for copper, 0.001 to 0.60 ppm for chromium, and 0.001 to 0.41 ppm for lead for the cup of company A. For the cup from company B, the concentration ranges for the leached metals were from 0.001 to 3.59 ppm, 0.001 to 1.08 ppm, and 0.001 to 0.29 ppm, respectively. Most of the values obtained for the leached concentrations of the metals studied were above the respective drinking water in WHO and USEPA permissible limits of 1 ppm (copper), 0.05 ppm (lead) and 0.1 ppm (chromium). The blue and green plastic cups from both companies had leached concentrations of copper, lead and chromium below the permissible limits at 25°C, pH 6.2 (milk) and a holding time of 30 minutes. The control cups did not leach detectable amounts of copper, chromium and lead under the study conditions, hence it may be safe for holding the hot drinks at the temperatures experimented in this study.展开更多
The biomechanical effects of acetabular revision with jumbo cups are unclear.This study aimed to compare the biomechanical effects of bionic trabecular metal vs.titanium jumbo cups for the revision of acetabular bone ...The biomechanical effects of acetabular revision with jumbo cups are unclear.This study aimed to compare the biomechanical effects of bionic trabecular metal vs.titanium jumbo cups for the revision of acetabular bone defects.We designed and reconstructed American Academy of Orthopaedic Surgeons(AAOS)type I–III acetabular bone defect models using computed tomography scans of a man without acetabular bone defects.The implantation of titanium and trabecular metal jumbo cups was simulated.Stress distribution and relative micromotion between the cup and host bone were assessed using finite element analysis.Contact stress on the screws fixing the cups was also analyzed.The contact stress analysis showed that the peak contact stress between the titanium jumbo cup and the host bone was 21.7,20.1,and 23.8 MPa in the AAOS I–III models,respectively;the corresponding values for bionic tantalum jumbo cups decreased to 4.7,6.7,and 11.1 MPa.Analysis of the relative micromotion showed that the peak relative micromotion between the host bone and the titanium metal cup was 10.2,9.1,and 11.5μm in the AAOS I–III models,respectively;the corresponding values for bionic trabecular metal cups were 17.2,18.2,and 31.3μm.The peak contact stress on the screws was similar for the 2 cup types,and was concentrated on the screw rods.Hence,acetabular reconstruction with jumbo cups is biomechanically feasible.We recommend trabecular metal cups due to their superior stress distribution and higher relative micromotion,which is within the threshold for adequate bone ingrowth.展开更多
The composition of paper cups creates a challenge for the recycling industry,as the paperboard–plastic film composite is hard to separate.Therefore,paper cups are sent to landfills or waste incinerators.This study ex...The composition of paper cups creates a challenge for the recycling industry,as the paperboard–plastic film composite is hard to separate.Therefore,paper cups are sent to landfills or waste incinerators.This study explores the combined use of red worms(Eisenia fetida)and Greater wax moth(Galleria mellonella)in the biodegradation of paper cups.The study investigates the conditions and combinations that promote using Eisenia fetida and Galleria mellonella for degrading paper cups.The study considered the influence of environmental temperature,the presence of food waste,varying the number of Eisenia fetida worms,and the presence of a Galleria mellonella growth-slowing agent on the degradation process.To achieve the study objectives,the study followed a quantitative approach.The study monitored the degradation of paper cup cuts that were placed in jars containing different combinations of Eisenia fetida worms,Galleria mellonella larvae,food waste,bedding material,and Galleria mellonella growth-slowing agents.The study found that the best operating temperature is 30oC.The study found that using food waste improves the performance of Eisenia fetida worms and Galleria mellonella larvae significantly.The study found that adding a Galleria mellonella growth-slowing agent slightly enhances the degradation of the paper cup.Finally,a numerical model was obtained to simulate the paper cup degradation efficiency.展开更多
In June 2026,the FIFA World Cup will be jointly hosted by three countries for the first time,featur ing 48 teams and 104 matches across 16 cities in North Amer ica.For the United States,Canada,and Mexico,this is not o...In June 2026,the FIFA World Cup will be jointly hosted by three countries for the first time,featur ing 48 teams and 104 matches across 16 cities in North Amer ica.For the United States,Canada,and Mexico,this is not only a sporting event but also a well-planned“economic feast.”展开更多
OBJECTIVE:To update the current best evidence on the effectiveness and safety of cupping therapy in pain management.METHODS:The protocol of this systematic review was registered at PROSPERO(CRD42021261308).An updated ...OBJECTIVE:To update the current best evidence on the effectiveness and safety of cupping therapy in pain management.METHODS:The protocol of this systematic review was registered at PROSPERO(CRD42021261308).An updated literature searching in 7 databases was conducted from January 2014 to January 2023.Two authors extracted data and assessed the risk of bias independently.Statistical analysis was performed using RevMan 5.4.1 software(Cochrane Collaboration,London,UK).Meta-analysis with a random effect model was conducted when there was no serious statistical heterogeneity among trials(I^(2) ≤ 75%).Grading of Recommendations Assessment,Development,and Evaluation was also conducted to assess the quality of evidence.RESULTS:Seventy-two trials with 5720 participants were included.All included trials were assessed as having high risk of bias.The majority of the included trials reported the benefit of cupping plus other therapy or cupping alone on improving cure rate(average risk ratio more than 1.15) and reducing visual analogue scale [average mean difference(MD) reduction 0.16 to 7.0 cm],improving quality of life,quality of sleep or other symptoms related to pain condition.And there was low/very low quality evidence that the incidence of adverse events in the cupping groups were lower than that in the control groups.Although the heterogeneity between studies and the methodological quality of the study itself lead to the low evidence strength of the current conclusions,the results of this study are a valuable supplement to the founding of previous review.CONCLUSION:Cupping therapy alone or combined with other therapy was considered benefit in relieving pain,improving the quality of life,and increasing the cure rate of patients with pain conditions,though supported by the low quality of evidence.According to the limited evidence,cupping therapy seems to have less harm than drugs when treating pain conditions.展开更多
BACKGROUND Clinical studies using Trabecular Titanium™acetabular cups have shown promising short and medium-term results.This material,due to its macro and micro surface roughness,provides a substrate for osseointegra...BACKGROUND Clinical studies using Trabecular Titanium™acetabular cups have shown promising short and medium-term results.This material,due to its macro and micro surface roughness,provides a substrate for osseointegration and enhances implant stability.However,there is a lack of evidence in the literature on the use of this material in patients with femoral neck fracture.AIM To evaluate the short-term clinical-functional and radiographic outcomes in patients with femoral neck fractures undergoing total hip arthroplasty(THA)with Trabecular Titanium™acetabular cup implants.METHODS The study included 104 patients with medial femoral neck fractures who underwent THA between January 2020 and December 2020 with the Delta TT acetabular cup(Lima Corporate,Villanova di San Daniele del Friuli,Italy).The mean age of the patients was 69.57±10.16 years(range:36-85 years).The followup period ranged from a minimum of 3 to a maximum of 4 years.Three questionnaires(Harris Hip Score,Oxford Hip Score,and EQ5D)were administered along with radiographic evaluations.Statistical methods included the Student's t-test and one-way analysis of variance for comparisons(with significance set at 0.05),and the Kaplan-Meier curve for prosthetic implant survival.RESULTS The mean follow-up was 41.5 months.The Harris Hip Score(HHS)showed a mean increase of 2.74 points(mean HHS 88.52 at 6 months postoperatively and mean HHS 91.26 at the last follow-up)with statistical significance.Similarly,the Oxford Hip Score demonstrated a statistically significant difference between follow-up groups.However,the EQ5D did not show statistically significant differences among the three groups(preoperative,6-month follow-up,and last follow-up).Revision surgery was required in 6 patients.According to Moore's criteria,96%of the acetabular components were radiographically stable and well-integrated at the last follow-up.The Kaplan-Meier curve showed a 96%survival rate.CONCLUSION The clinical and radiographic results obtained in the short to medium term confirm the excellent performance of the Delta TT acetabular cup in terms of osseointegration,providing an optimal solution both for young patients with high functional recovery demands and for fragile patients requiring optimal stability of the acetabular component to reduce the risk of implant failure.展开更多
文摘1 Kristina Smithe was running the California International Marathon in 2019,drinking cups of water when thirsty,when she started to think about how much waste such events produce.On the flight home,she did the math:There were 9,000 runners,17 aid stations and something like 150,000 cups used once and thrown away.
基金supported by National Research Foundation of Korea(NRF)grants funded by the Korean government(MSIT)(No.RS-2023-00256265,RS-2024-00352352,RS-2024-00405818)the Korean Fund for Regenerative Medicine(KFRM)grant funded by the Korea government(the Ministry of Science and ICT,the Ministry of Health&Welfare).(No.25A0102L1)support from the Market-led K-sensor technology program(RS-2022-00154781,Development of large-area wafer-level flexible/stretchable hybrid sensor platform technology for form factor-free highly integrated convergence sensor),funded By the Ministry of Trade,Industry&Energy(MOTIE,Korea).
文摘Microneedles(MNs)have been extensively investigated for transdermal delivery of large-sized drugs,including proteins,nucleic acids,and even extracellular vesicles(EVs).However,for their sufficient skin penetration,conventional MNs employ long needles(≥600μm),leading to pain and skin irritation.Moreover,it is critical to stably apply MNs against complex skin surfaces for uniform nanoscale drug delivery.Herein,a dually amplified transdermal patch(MN@EV/SC)is developed as the stem cell-derived EV delivery platform by hierarchically integrating an octopusinspired suction cup(SC)with short MNs(≤300μm).While leveraging the suction effect to induce nanoscale deformation of the stratum corneum,MN@EV/SC minimizes skin damage and enhances the adhesion of MNs,allowing EV to penetrate deeper into the dermis.When MNs of various lengths are applied to mouse skin,the short MNs can elicit comparable corticosterone release to chemical adhesives,whereas long MNs induce a prompt stress response.MN@EV/SC can achieve a remarkable penetration depth(290μm)for EV,compared to that of MN alone(111μm).Consequently,MN@EV/SC facilitates the revitalization of fibroblasts and enhances collagen synthesis in middle-aged mice.Overall,MN@EV/SC exhibits the potential for skin regeneration by modulating the dermal microenvironment and ensuring patient comfort.
基金supported by the Deutsche Forschungsgemein-schaft (German Science Foundation) (No. DFG FOR 891/1)the National Natural Science Foundation of China (Nos. 30710103907, 30930005)
文摘Sand-fflled splash cups were used to study the erosive power of rainfall and throughfall in the humid subtropics of Southeast China. The splash cup measurements yielded precise and reproducible results under both open field conditions and forest vegetation. The splash cups were exposed to specific forest stands of different ages and to selected species （Schima superba, Castanopsis eyrei, Daphniphyllum oldhamii, Lithocarpus glaber） in the Gutianshan （古田山） National Nature Reserve （GNNR）. The results of the measurements under forest vegetation show that the erosive power of throughfall drops to be 2.59 times higher compared to the open field. This accentuates the importance of shrub, herb and litter layers in forest ecosystems to protect the soil against erosion. Coalescing drops from leaves and branches （drips） are responsible for this notable gain in erosive power. Moreover, differences in sandloss between the investigated tree species （deciduous, evergreen） revealed that the erosion potential and the spatial heterogeneity of throughfall are species-specific. This highlights the importance of selecting specific species for afforestation projects considering the prevention of soil erosion.
文摘Major defects in forming of conical cups are wrinkles and rupture.Hydrodynamic deep drawing assisted by radial pressure（HDDRP） is a sheet hydroforming process for production of shell cups in one step.In this work,process window diagrams（PWDs） for Al1050-O,pure copper and DIN 1623 St14 steel are obtained for HDDRP process.The PWD is determined to provide a quick assessment of part producibility for sheet hydroforming process.Finite element method is used for this purpose considering the process parameters including pressure path,and the blank material and its thickness.Numerical results are validated by experiments.It is shown that the sheets with less initial thickness and higher strength show better formability and uniformity of thickness distribution on final product.The results demonstrate that the obtained PWD can predict appropriate forming area and probability of rupture or wrinkling occurrence under different pressure loading paths.
文摘Hydrodynamic deep drawing assisted by radial pressure is an advanced sheet forming technology with great advantages such as higher drawing ratio, good surface quality and higher dimensional accuracy. In this process, both the bottom surface and the peripheral edge of sheets are under hydrodynamic pressure, so that the forming procedure is more uniform with low failure probability. Multi-layered sheets with complex geometries could be formed more easily with this technique compared with other traditional methods. Rupture is the main irrecoverable failure form in sheet forming processes. Prediction of rupture occurrence is of great importance for determining and optimizing the proper process parameters. In this research, a theoretical model was proposed to calculate the critical rupture pressure in production of double layered conical parts with hydrodynamic deep drawing process assisted by radial pressure. The effects of other process parameters on critical rupture pressure, such as punch tip radius, drawing ratio, coefficient of friction, sheet thickness and material properties were also discussed. The proposed model was compared with finite element simulation and validated by experiments on Al1050/St13 double layered sheets, where a good agreement was found with analytical results.
基金supported by the Micro Grant (PG20473) at the University of Nevada, Reno, USA
文摘Acetabular cups,which are among themost important implants in total hip arthroplasty,are usually made from titanium alloys with high porosity and adequate mechanical properties.The current three-dimensional(3D)printing approaches to fabricate customized acetabular cups have some inherent disadvantages such as high cost and energy consumption,residual thermal stress,and relatively low efficiency.Thus,in this work,a direct ink writing method was developed to print a cup structure at room temperature,followed by multi-step heat treatment to form microscale porous structure within the acetabular cup.Our method is facilitated by the development of a self-supporting titanium-6 aluminum-4 vanadium(Ti64)ink that is composed of Ti64 particles,bentonite yield-stress additive,ultraviolet curable polymer,and photo-initiator.The effects of Ti64 and bentonite concentrations on the rheological properties and printability of inks were systematically investigated.Moreover,the printing conditions,geometrical limitations,and maximum curing depth were explored.Finally,some complex 3D structures,including lattices with different gap distances,honeycomb with a well-defined shape,and an acetabular cup with uniformly distributed micropores,were successfully printed/fabricated to validate the effectiveness of the proposed method.
文摘Bacterial transfer is a concern when sharing food and drink, so to address this concern, this study examined the bacterial transfer onto and into plastic drinking cups. Two experiments were performed to: 1) test bacterial transfer to the rim of a plastic drinking cup, and 2) test residual bacteria in the liquid that was consumed from the cup. Bacteria were enumerated from the cup rim and the water in the cup. The results for both types of transfer showed higher bacterial populations on cups exposed to drinking compared to those where no drinking occurred. However, there was more bacterial transfer to the rim of the plastic cup than the liquid inside the cup.
文摘Plastic cups commonly used by communities of Uganda lose color with time as they are used. The purpose of this study was to determine the concentrations of copper, lead and chromium in drinks placed in blue and green plastic cups from two companies (anonymized as A and B) in Uganda. New blue and green polyethylene plastic cups produced from unrecycled material were purchased from company A and company B while control cups of Luminarc white (Saudi Arabia) and porcelain white glazed (China) were purchased from shops in Mbarara city. The ash from the burnt blue and green plastic cups was digested using Aqua Regia. After a holding time of 30 and 60 minutes, milk and tea samples in the four different cups were also digested using Aqua Regia. Sample analysis for the supernatants was done in triplicates using an atomic absorption spectrophotometer. The ash of blue and green cups from company A was found to contain the highest concentration of heavy metals which ranged from 0.73 to 1.86 ppm for lead, 8.05 to 38.32 ppm of copper, and 655.80 to 756.57 ppm for chromium. For company B, the heavy metal concentrations ranged from 0.76 to 1.43 ppm, 5.51 to 22.85 ppm, and 756.67 to 815.25 ppm, respectively. The concentration of the leached metals ranged from 0.001 to 5.75 ppm for copper, 0.001 to 0.60 ppm for chromium, and 0.001 to 0.41 ppm for lead for the cup of company A. For the cup from company B, the concentration ranges for the leached metals were from 0.001 to 3.59 ppm, 0.001 to 1.08 ppm, and 0.001 to 0.29 ppm, respectively. Most of the values obtained for the leached concentrations of the metals studied were above the respective drinking water in WHO and USEPA permissible limits of 1 ppm (copper), 0.05 ppm (lead) and 0.1 ppm (chromium). The blue and green plastic cups from both companies had leached concentrations of copper, lead and chromium below the permissible limits at 25°C, pH 6.2 (milk) and a holding time of 30 minutes. The control cups did not leach detectable amounts of copper, chromium and lead under the study conditions, hence it may be safe for holding the hot drinks at the temperatures experimented in this study.
基金This work was supported by funding from China Postdoctoral Science Foundation(No:2020M670863)Jilin Scientific and Technological Development Program(No:20230203089SF).
文摘The biomechanical effects of acetabular revision with jumbo cups are unclear.This study aimed to compare the biomechanical effects of bionic trabecular metal vs.titanium jumbo cups for the revision of acetabular bone defects.We designed and reconstructed American Academy of Orthopaedic Surgeons(AAOS)type I–III acetabular bone defect models using computed tomography scans of a man without acetabular bone defects.The implantation of titanium and trabecular metal jumbo cups was simulated.Stress distribution and relative micromotion between the cup and host bone were assessed using finite element analysis.Contact stress on the screws fixing the cups was also analyzed.The contact stress analysis showed that the peak contact stress between the titanium jumbo cup and the host bone was 21.7,20.1,and 23.8 MPa in the AAOS I–III models,respectively;the corresponding values for bionic tantalum jumbo cups decreased to 4.7,6.7,and 11.1 MPa.Analysis of the relative micromotion showed that the peak relative micromotion between the host bone and the titanium metal cup was 10.2,9.1,and 11.5μm in the AAOS I–III models,respectively;the corresponding values for bionic trabecular metal cups were 17.2,18.2,and 31.3μm.The peak contact stress on the screws was similar for the 2 cup types,and was concentrated on the screw rods.Hence,acetabular reconstruction with jumbo cups is biomechanically feasible.We recommend trabecular metal cups due to their superior stress distribution and higher relative micromotion,which is within the threshold for adequate bone ingrowth.
基金funded by the Deanship of Scientific Research at the University of Jordan.
文摘The composition of paper cups creates a challenge for the recycling industry,as the paperboard–plastic film composite is hard to separate.Therefore,paper cups are sent to landfills or waste incinerators.This study explores the combined use of red worms(Eisenia fetida)and Greater wax moth(Galleria mellonella)in the biodegradation of paper cups.The study investigates the conditions and combinations that promote using Eisenia fetida and Galleria mellonella for degrading paper cups.The study considered the influence of environmental temperature,the presence of food waste,varying the number of Eisenia fetida worms,and the presence of a Galleria mellonella growth-slowing agent on the degradation process.To achieve the study objectives,the study followed a quantitative approach.The study monitored the degradation of paper cup cuts that were placed in jars containing different combinations of Eisenia fetida worms,Galleria mellonella larvae,food waste,bedding material,and Galleria mellonella growth-slowing agents.The study found that the best operating temperature is 30oC.The study found that using food waste improves the performance of Eisenia fetida worms and Galleria mellonella larvae significantly.The study found that adding a Galleria mellonella growth-slowing agent slightly enhances the degradation of the paper cup.Finally,a numerical model was obtained to simulate the paper cup degradation efficiency.
文摘In June 2026,the FIFA World Cup will be jointly hosted by three countries for the first time,featur ing 48 teams and 104 matches across 16 cities in North Amer ica.For the United States,Canada,and Mexico,this is not only a sporting event but also a well-planned“economic feast.”
基金National Natural Science Foundation of China Project:Research on the Correlation between Traditional Chinese Medicine Constitution,Cupping Marks Color,and Clinical Efficacy Based on Regression Models (No.81804000)。
文摘OBJECTIVE:To update the current best evidence on the effectiveness and safety of cupping therapy in pain management.METHODS:The protocol of this systematic review was registered at PROSPERO(CRD42021261308).An updated literature searching in 7 databases was conducted from January 2014 to January 2023.Two authors extracted data and assessed the risk of bias independently.Statistical analysis was performed using RevMan 5.4.1 software(Cochrane Collaboration,London,UK).Meta-analysis with a random effect model was conducted when there was no serious statistical heterogeneity among trials(I^(2) ≤ 75%).Grading of Recommendations Assessment,Development,and Evaluation was also conducted to assess the quality of evidence.RESULTS:Seventy-two trials with 5720 participants were included.All included trials were assessed as having high risk of bias.The majority of the included trials reported the benefit of cupping plus other therapy or cupping alone on improving cure rate(average risk ratio more than 1.15) and reducing visual analogue scale [average mean difference(MD) reduction 0.16 to 7.0 cm],improving quality of life,quality of sleep or other symptoms related to pain condition.And there was low/very low quality evidence that the incidence of adverse events in the cupping groups were lower than that in the control groups.Although the heterogeneity between studies and the methodological quality of the study itself lead to the low evidence strength of the current conclusions,the results of this study are a valuable supplement to the founding of previous review.CONCLUSION:Cupping therapy alone or combined with other therapy was considered benefit in relieving pain,improving the quality of life,and increasing the cure rate of patients with pain conditions,though supported by the low quality of evidence.According to the limited evidence,cupping therapy seems to have less harm than drugs when treating pain conditions.
文摘BACKGROUND Clinical studies using Trabecular Titanium™acetabular cups have shown promising short and medium-term results.This material,due to its macro and micro surface roughness,provides a substrate for osseointegration and enhances implant stability.However,there is a lack of evidence in the literature on the use of this material in patients with femoral neck fracture.AIM To evaluate the short-term clinical-functional and radiographic outcomes in patients with femoral neck fractures undergoing total hip arthroplasty(THA)with Trabecular Titanium™acetabular cup implants.METHODS The study included 104 patients with medial femoral neck fractures who underwent THA between January 2020 and December 2020 with the Delta TT acetabular cup(Lima Corporate,Villanova di San Daniele del Friuli,Italy).The mean age of the patients was 69.57±10.16 years(range:36-85 years).The followup period ranged from a minimum of 3 to a maximum of 4 years.Three questionnaires(Harris Hip Score,Oxford Hip Score,and EQ5D)were administered along with radiographic evaluations.Statistical methods included the Student's t-test and one-way analysis of variance for comparisons(with significance set at 0.05),and the Kaplan-Meier curve for prosthetic implant survival.RESULTS The mean follow-up was 41.5 months.The Harris Hip Score(HHS)showed a mean increase of 2.74 points(mean HHS 88.52 at 6 months postoperatively and mean HHS 91.26 at the last follow-up)with statistical significance.Similarly,the Oxford Hip Score demonstrated a statistically significant difference between follow-up groups.However,the EQ5D did not show statistically significant differences among the three groups(preoperative,6-month follow-up,and last follow-up).Revision surgery was required in 6 patients.According to Moore's criteria,96%of the acetabular components were radiographically stable and well-integrated at the last follow-up.The Kaplan-Meier curve showed a 96%survival rate.CONCLUSION The clinical and radiographic results obtained in the short to medium term confirm the excellent performance of the Delta TT acetabular cup in terms of osseointegration,providing an optimal solution both for young patients with high functional recovery demands and for fragile patients requiring optimal stability of the acetabular component to reduce the risk of implant failure.
