With the economic and social development of the country,vocational education is playing an increasingly significant role in cultivating highly skilled talents.However,the mechanical drawing courses in vocational colle...With the economic and social development of the country,vocational education is playing an increasingly significant role in cultivating highly skilled talents.However,the mechanical drawing courses in vocational colleges still face numerous challenges in the teaching process,such as outdated textbook content,inadequate practical resources,weak teaching staff,and low student interest.This paper aims to explore these issues and propose corresponding coping strategies.The findings of this study not only provide specific improvement suggestions for vocational colleges but also emphasize the importance of these strategies in enhancing students’comprehensive abilities and promoting the development of vocational education.By addressing these challenges,this paper contributes to the enhancement of teaching quality and the overall advancement of vocational skills education.展开更多
To address issues such as inefficient top-coal drawing,challenges in simultaneously mining and drawing,and the need for intelligent control in extra-thick coal seams,this study examines the principles of top-coal draw...To address issues such as inefficient top-coal drawing,challenges in simultaneously mining and drawing,and the need for intelligent control in extra-thick coal seams,this study examines the principles of top-coal drawing and explores automation and intelligent equipment solutions within the framework of the group coal drawing method.Numerical simulations were performed to investigate the impact of the Number of Drawing Openings(NDO)and rounds on top-coal recovery,coal draw-ing efficiency,and Top Coal Loss(TCL)mechanism.Subsequently,considering the recovery and coal drawing efficiency and by introducing the instantaneous gangue content and cumulative gangue content in simulations,the top-coal recovery,gangue content,and coal loss distribution when considering excessive coal drawing were analyzed.This established a foun-dation for determining the optimal NDO and shutdown timing.Finally,the key technical principle and automated control of a shock vibration and hyperspectral fusion recognition device were detailed,and an intelligent coal drawing control method based on this technology was developed.This technology enabled the precise control of the instantaneous gangue content(35%)during coal drawing.The top-coal recovery at the Tashan Mine 8222 working face increased by 14.78%,and the gangue content was controlled at~9%,consistent with the numerical simulation results.Thus,the reliability of the numerical simulation results was confirmed to a certain extent.Meanwhile,the single-group drawing method significantly enhanced the production capacity of the 8222 working face,achieving an annual output of 15 million tons.展开更多
With the development and popularization of computer application technology,the use of computer graphics and image processing technology has become the main means of modern engineering design and drawing.Learning and m...With the development and popularization of computer application technology,the use of computer graphics and image processing technology has become the main means of modern engineering design and drawing.Learning and mastering 3D modeling technology and mechanical information modeling technology have become an important goal of learning engineering drawing.To meet the teaching requirements of the“New Engineering”program,higher education should cultivate innovative talents with the ability to identify,express,analyze,and solve complex engineering problems;promote the transformation of teaching methods for the course of“Mechanical Drawing and Computer Drawing”from“teaching well”to“learning well.”This change is not only a change in course content,but also a change in training objectives.It introduces modern 3D design concepts into the drawing course,constructs a learning system with 3D modeling technology as the main line,solves the problem of imagination in traditional teaching,makes the learning process more in line with scientific cognitive laws,better meets the needs of modern manufacturing industry for new technologies,and improves students’drawing skills and ability to use modern tools(computer drawing).展开更多
The effects of drawing strain during intermediate annealing on the microstructure and properties of Cu-20 wt%Fe alloy wires while maintaining constant total deformation were investigated.Intermediate annealing effecti...The effects of drawing strain during intermediate annealing on the microstructure and properties of Cu-20 wt%Fe alloy wires while maintaining constant total deformation were investigated.Intermediate annealing effectively removes work hardening in both the Cu matrix and Fe fibers,restoring their plastic deformation capacity and preserving fiber continuity during subsequent redrawing.The process also refines the Fe phase,leading to a more uniform size distribution and straighter,better-aligned Cu/Fe phase interfaces,thereby enhancing the comprehensive properties of the alloy.The magnitude of drawing strain during intermediate annealing plays a critical role in balancing the mechanical strength and electrical conductivity of redrawn wires.A lower initial drawing strain requires greater redrawing strain,leading to excessive hardening of the Fe fibers,which negatively impacts the electrical conductivity and tensile plasticity.Conversely,a higher initial drawing strain can result in insufficient work hardening during the redrawing deformation process,yielding minimal strength improvements.Among the tested alloys,H/3.5 wires show a slight reduction in strength and hardness compared to W and H/4.5 wires but exhibit a significant increase in tensile elongation and electrical conductivity.The tensile strength was 755 MPa,and the electrical conductivity was 47%international-annealed copper standard(IACS).The optimal performance is attributed to the formation of a high-density,ultrafine Fe fiber structure-aligned parallel to the drawing direction,which is achieved through a suitable combination of the drawing process and intermediate annealing.展开更多
The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the micr...The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.展开更多
Accurate vector extraction from design drawings is required first to automatically create 3D models from pixel-level engineering design drawings. However, this task faces the challenges of complicated design shapes as...Accurate vector extraction from design drawings is required first to automatically create 3D models from pixel-level engineering design drawings. However, this task faces the challenges of complicated design shapes as well as cumbersome and cluttered annotations on drawings, which interfere with the vector extraction heavily. In this article, the transmission tower containing the most complex structure is taken as the research object, and a semantic segmentation network is constructed to first segment the shape masks from the pixel-level drawings. Preprocessing and postprocessing are also proposed to ensure the stability and accuracy of the shape mask segmentation. Then, based on the obtained shape masks, a vector extraction network guided by heatmaps is designed to extract structural vectors by fusing the features from node heatmap and skeleton heatmap, respectively. Compared with the state-of-the-art methods, experiment results illustrate that the proposed semantic segmentation method can effectively eliminate the interference of many elements on drawings to segment the shape masks effectively, meanwhile, the model trained by the proposed vector extraction network can accurately extract the vectors such as nodes and line connections, avoiding redundant vector detection. The proposed method lays a solid foundation for automatic 3D model reconstruction and contributes to technological advancements in relevant fields.展开更多
Magnesium alloy,the lightest structural metal substance currently known,has garnered a great deal of interest in recent times.Magnesium alloys not only offer high specific strength,high specific stiffness,and low dens...Magnesium alloy,the lightest structural metal substance currently known,has garnered a great deal of interest in recent times.Magnesium alloys not only offer high specific strength,high specific stiffness,and low density,but they also have outstanding anti-electromagnetic interference properties,shock absorption,are easy to recycle,and are biocompatible.It has a wide range of uses,including automotive,aerospace,military,and biological.Magnesium alloy’s compact hexagonal structure creates few slip systems at room temperature,leading to low plasticity and limited applicability.Deep drawing of magnesium alloys is a major procedure in the aerospace and automotive sectors due to the high strength-to-weight ratio.This paper presents all the aspects of deep drawing of magnesium alloys,covering the innovative methods of deep drawing,factors influencing the performance of deep drawing,simulation and modeling,optimization of deep drawing,and the microstructural changes during deep drawing and its impact on mechanical properties.Finally,the challenges and scope for future research are explored.展开更多
In the present study,two-layered stainless steel-copper composites with a thickness of 50μm were initially subjected to annealing at 800,900 and 1000℃for 5 min,respectively,to achieve diverse microstructural feature...In the present study,two-layered stainless steel-copper composites with a thickness of 50μm were initially subjected to annealing at 800,900 and 1000℃for 5 min,respectively,to achieve diverse microstructural features.Then the influence of annealing temperature on the formability of stainless steel-copper composites and the quality of micro composite cups manufactured by micro deep drawing(MDD)were investigated,and the underlying mechanism was analyzed.Three finite element(FE)models,including basic FE model,Voronoi FE model and surface morphological FE model,were developed to analyze the forming performance of stainless steel-copper composites during MDD.The results show that the stainless steel-copper composites annealed at 900℃possess the best plasticity owing to the homogeneous and refined microstructure in both stainless steel and copper matrixes,and the micro composite cup with specimen annealed at 900℃exhibits a uniform wall thickness as well as high surface quality with the fewest wrinkles.The results obtained from the surface morphological FE model considering material inhomogeneity and surface morphology of the composites are the closest to the experimental results compared to the basic and Voronoi FE model.During MDD process,the drawing forces decrease with increasing annealing temperature as a consequence of the strength reduction.展开更多
In this work,the{10–12}tensile twins are introduced to improve the drawability of the AZ31 Mg alloy sheet.Concretely,the drawing depth is increased by 32%compared with the as-received sheet at 200℃.This is because{1...In this work,the{10–12}tensile twins are introduced to improve the drawability of the AZ31 Mg alloy sheet.Concretely,the drawing depth is increased by 32%compared with the as-received sheet at 200℃.This is because{10–12}tensile twins promote the occurrences of many deformation mechanisms during warm deep drawing,such as slips,detwinning,dynamic recrystallization(DRX)behaviors,etc.Further,based on the different stress states during deep drawing,these mechanisms and their competition relationships,as well as texture evolutions,are systematically studied.Combined with critical resolved shear stress(CRSS)and microstructure evolution,the global Schmid factor(GSF)obtained by quantizing stress states by stress tensor(σ)can accurately predict the activation trend of deformation mechanisms.It is found that the stress states have a reverse influence on the activation trend of the{10–12}twinning and detwinning.The change of stress states affects the competitive relationships between detwinning and DRX,and then affects the process and degree of DRX.The{10–12}tensile twins and large plane strain promote the activation of prismatic slips,and the larger plane strain also deflected the{10–12}twinning lattice.The{10–12}tensile twins and their induced deformation mechanisms can prominently weaken the basal texture and improve the drawability.展开更多
A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micr...A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.展开更多
In this study,a numerical analysis was conducted on the ductile fracture of a 2-mm diameter Mg-1Zn-0.5Mn-0.5Sr-0.1Ca alloy wire during drawing.The hexagonally close-packed crystal structure of Mg alloys causes asymmet...In this study,a numerical analysis was conducted on the ductile fracture of a 2-mm diameter Mg-1Zn-0.5Mn-0.5Sr-0.1Ca alloy wire during drawing.The hexagonally close-packed crystal structure of Mg alloys causes asymmetric fracture behavior,especially in the compression region.The aim of this study is to develop a comprehensive damage model for Mg alloy wire that accurately predicts ductile fracture,with a focus on the compression region.A novel experimental method was introduced to measure the ductile fracture of Mg alloy wires under different stress states.The wire drawing process was simulated using the Generalized Incremental Stress-State dependent damage(GISSMO)Model and the Semi-Analytical Model for Polymers(SAMP)model.The damage model's prediction and the experimental results were found to be in excellent agreement,especially in determining crack initiation.Computational analysis established a safe zone diagram for die angle and reduction ratio,and experimental validation confirmed the feasibility of this approach.The proposed damage model can provide a practical and reliable analysis for optimizing the drawing process of Mg alloy wire.展开更多
The sublevel top coal caving(SLTCC)mining technology is extensively employed in steeply inclined thick coal seams.Because of the typical characteristics of the short coal face in this mining method,a signifi-cant port...The sublevel top coal caving(SLTCC)mining technology is extensively employed in steeply inclined thick coal seams.Because of the typical characteristics of the short coal face in this mining method,a signifi-cant portion of the top coal is lost at the face end.For reducing the coal loss,the partially reverse drawing technique(PRDT)is proposed as a novel top coal drawing technique.Meanwhile,based on the Bergmark-Roos model(B-R model),a theoretical method for calculating the recovery ratio of top coal based on the top coal boundary equation and residual top coal amount is proposed.The mechanism of PRDT to reduce top coal loss at the face end is revealed by comparing with single-round sequential drawing technique(SSDT).Physical experiments and in-site observation data were used to verify the theoretical model.The results show that PRDT can effectively reduce the amount of residual coal near the roof by optimizing the shape characteristics of top coal boundary.Suggestions for improve recovery ratio in Wudong Coal Mine were given based on its face parameters.展开更多
Accurately predicting environmental parameters in solar greenhouses is crucial for achieving precise environmental control.In solar greenhouses,temperature,humidity,and light intensity are crucial environmental parame...Accurately predicting environmental parameters in solar greenhouses is crucial for achieving precise environmental control.In solar greenhouses,temperature,humidity,and light intensity are crucial environmental parameters.The monitoring platform collected data on the internal environment of the solar greenhouse for one year,including temperature,humidity,and light intensity.Additionally,meteorological data,comprising outdoor temperature,outdoor humidity,and outdoor light intensity,was gathered during the same time frame.The characteristics and interrelationships among these parameters were investigated by a thorough analysis.The analysis revealed that environmental parameters in solar greenhouses displayed characteristics such as temporal variability,non-linearity,and periodicity.These parameters exhibited complex coupling relationships.Notably,these characteristics and coupling relationships exhibited pronounced seasonal variations.The multi-parameter multi-step prediction model for solar greenhouse(MPMS-SGH)was introduced,aiming to accurately predict three key greenhouse environmental parameters,and the model had certain seasonal adaptability.MPMS-SGH was structured with multiple layers,including an input layer,a preprocessing layer,a feature extraction layer,and a prediction layer.The input layer was used to generate the original sequence matrix,which included indoor temperature,indoor humidity,indoor light intensity,as well as outdoor temperature and outdoor light intensity.Then the preprocessing layer normalized,decomposed,and positionally encoded the original sequence matrix.In the feature extraction layer,the time attention mechanism and frequency attention mechanism were used to extract features from the trend component and the seasonal component,respectively.Finally,the prediction layer used a multi-layer perceptron to perform multi-step prediction of indoor environmental parameters(i.e.temperature,humidity,and light intensity).The parameter selection experiment evaluated the predictive performance of MPMS-SGH on input and output sequences of different lengths.The results indicated that with a constant output sequence length,the prediction accuracy of MPMS-SGH was firstly increased and then decreased with the increase of input sequence length.Specifically,when the input sequence length was 100,MPMS-SGH had the highest prediction accuracy,with RMSE of 0.22℃,0.28%,and 250lx for temperature,humidity,and light intensity,respectively.When the length of the input sequence remained constant,as the length of the output sequence increased,the accuracy of the model in predicting the three environmental parameters was continuously decreased.When the length of the output sequence exceeded 45,the prediction accuracy of MPMS-SGH was significantly decreased.In order to achieve the best balance between model size and performance,the input sequence length of MPMS-SGH was set to be 100,while the output sequence length was set to be 35.To assess MPMS-SGH’s performance,comparative experiments with four prediction models were conducted:SVR,STL-SVR,LSTM,and STL-LSTM.The results demonstrated that MPMS-SGH surpassed all other models,achieving RMSE of 0.15℃for temperature,0.38%for humidity,and 260lx for light intensity.Additionally,sequence decomposition can contribute to enhancing MPMS-SGH’s prediction performance.To further evaluate MPMS-SGH’s capabilities,its prediction accuracy was tested across different seasons for greenhouse environmental parameters.MPMS-SGH had the highest accuracy in predicting indoor temperature and the lowest accuracy in predicting humidity.And the accuracy of MPMS-SGH in predicting environmental parameters of the solar greenhouse fluctuated with seasons.MPMS-SGH had the highest accuracy in predicting the temperature inside the greenhouse on sunny days in spring(R^(2)=0.91),the highest accuracy in predicting the humidity inside the greenhouse on sunny days in winter(R^(2)=0.83),and the highest accuracy in predicting the light intensity inside the greenhouse on cloudy days in autumm(R^(2)=0.89).MPMS-SGH had the lowest accuracy in predicting three environmental parameters in a sunny summer greenhouse.展开更多
This paper first deeply interprets the connotation of the“One Core,Two Lines,Four Dimensions”ideological and political teaching model in courses.Then,it explores the significant meaning of integrating this teaching ...This paper first deeply interprets the connotation of the“One Core,Two Lines,Four Dimensions”ideological and political teaching model in courses.Then,it explores the significant meaning of integrating this teaching model into the Interpretation of Concrete Plane Construction Drawings course.Finally,based on the challenges faced in this work,corresponding educational countermeasures are proposed to help improve the effectiveness and quality of ideological and political construction in the Interpretation of Concrete Plane Construction Drawings course and enhance the level of talent cultivation.展开更多
The advantage distillation(AD)technology has been proven to effectively improve the secret key rate and the communication distance of quantum key distribution(QKD).The mode-pairing quantum key distribution(MP-QKD)prot...The advantage distillation(AD)technology has been proven to effectively improve the secret key rate and the communication distance of quantum key distribution(QKD).The mode-pairing quantum key distribution(MP-QKD)protocol can overcome a fundamental physical limit,known as the Pirandola-Laurenza-Ottaviani-Banchi bound,without requiring global phase-locking.In this work,we propose a method based on multi-step AD to further enhance the performance of MP-QKD.The simulation results show that,compared to one-step AD,multi-step AD achieves better performance in long-distance scenarios and can tolerate a higher quantum bit error rate.Specifically,when the difference between the communication distances from Alice and Bob to Charlie is 25 km,50 km and 75 km,and the corresponding transmission distance exceeds 523 km,512 km and 496 km,respectively,the secret key rate achieved by multi-step AD surpasses that of one-step AD.Our findings indicate that the proposed method can effectively promote the application of MP-QKD in scenarios with high loss and high error rate.展开更多
The deformation of Cu–20 wt.%Fe alloy wires leads to a significant improvement in mechanical properties and a decrease in electrical conductivity.Simultaneous improvements in strength and conductivity were achieved b...The deformation of Cu–20 wt.%Fe alloy wires leads to a significant improvement in mechanical properties and a decrease in electrical conductivity.Simultaneous improvements in strength and conductivity were achieved by intermediate annealing of drawn Cu–20 wt.%Fe wires.As the annealing temperature increased,the strength of Cu–20 wt.%Fe alloy wire decreased monotonically,but the electrical conductivity first increased and then decreased,reaching its peak value after annealing at 500℃.The decrease in strength is related to dislocation recovery and static recrystallization of Cu and Fe phases,and the increase in electrical conductivity mainly results from the aging precipitation of solid solution Fe.After annealing at 500℃,there was no obvious recrystallization of Cu phase,and many of the nano-Fe particles precipitated from Cu matrix.An annealing temperature of 600℃ induced the recrystallization of Cu matrix and an increase in Fe solid solubility,resulting in a decrease in strength and electrical conductivity.Subsequently,the wires annealed at 500℃ were drawn to 2 mm.Compared with those of the continuously drawn Cu–20 wt.%Fe alloy wires,the deformation ability,strength,and electrical conductivity of Cu–20 wt.%Fe alloy wires subjected to intermediate annealing treatment are significantly greater.This is mainly related to the sufficient precipitation of Fe in Cu matrix and the strengthening of refined Fe fibers parallel to the drawing direction.展开更多
In this paper,a composite numerical scheme is proposed to solve the threedimensional Darcy-Forchheimer miscible displacement problem with positive semi-definite assumptions.A mixed finite element is used for the fow e...In this paper,a composite numerical scheme is proposed to solve the threedimensional Darcy-Forchheimer miscible displacement problem with positive semi-definite assumptions.A mixed finite element is used for the fow equation.The velocity and pressure are computed simultaneously.The accuracy of velocity is improved one order.The concentration equation is solved by using mixed finite element,multi-step difference and upwind approximation.A multi-step method is used to approximate time derivative for improving the accuracy.The upwind approximation and an expanded mixed finite element are adopted to solve the convection and diffusion,respectively.The composite method could compute the diffusion flux and its gradient.It possibly becomes an eficient tool for solving convection-dominated diffusion problems.Firstly,the conservation of mass holds.Secondly,the multi-step method has high accuracy.Thirdly,the upwind approximation could avoid numerical dispersion.Using numerical analysis of a priori estimates and special techniques of differential equations,we give an error estimates for a positive definite problem.Numerical experiments illustrate its computational efficiency and feasibility of application.展开更多
304H austenitic stainless steel wire was investigated,emphasizing microstructural deformation,martensite phase transformation,and residual magnetic properties during drawing.Utilizing several microstructural observati...304H austenitic stainless steel wire was investigated,emphasizing microstructural deformation,martensite phase transformation,and residual magnetic properties during drawing.Utilizing several microstructural observation techniques,the volume fraction of martensite,modes of grain deformation in distinct regions,and the phase relationship between austenite and martensite were comprehensively characterized.In addition,a finite element simulation with representative volume elements specific to different zones also offers insights into strain responses during the drawing process.Results from the first-pass drawing reveal that there exists a higher volume fraction of martensite in the central region of 304H austenitic stainless steel wire compared to edge areas.This discrepancy is attributed to a concentrated presence of shear slip system{111}<110>γcrystallographic orientation,primarily accumulating in the central region obeying the Kurdjumov-Sachs path.Subsequent to the second drawing pass,the cumulative shear deformation within distinct regions of the steel wire became more pronounced.This resulted in a progressive augmentation of the volume fraction of martensite in both the central and peripheral regions of the steel wire.Concurrently,this led to a discernible elevation in the overall residual magnetism of the steel wire.展开更多
Using high-speed oil-filled spinning method,high quality micro copper tube with straight grooves（MCTSG） with an outer diameter of 6 mm was obtained.Then,MCTSG with an outer diameter of 3-6 mm was fabricated successf...Using high-speed oil-filled spinning method,high quality micro copper tube with straight grooves（MCTSG） with an outer diameter of 6 mm was obtained.Then,MCTSG with an outer diameter of 3-6 mm was fabricated successfully by multi-pass drawing processing method.The influence of drawing parameters on the forming of micro straight grooves was investigated based on the forming mechanism.The results show that the values of groove depth and width decrease,while the wall thickness increases as the drawing diameter decreases.At the same time,the groove depth and width increase,while the wall thickness decreases as the die angle increases.The drawing force increases as the reduction increases.Excessive copper tube reduction may results in groove folding and segmental teeth.The drawing force decreases firstly and then increases with the increases in die angle.When the die angle α is 16°,the drawing force is the smallest,indicating 16° is the optimal angle.展开更多
The development of microstructure and texture during cold deep drawing of commercially pure titanium（CP-Ti） was investigated.Three parts,stretching region,drawing region and flange region,were sequentially formed in...The development of microstructure and texture during cold deep drawing of commercially pure titanium（CP-Ti） was investigated.Three parts,stretching region,drawing region and flange region,were sequentially formed in the deep drawing process of the hemispheric surface part,with reference to deformation modes and strain regimes.Results show that the plastic strain is accommodated by dislocation slip and deformation twinning in the whole deep drawing process.The texture of the CP-Ti sheet and its drawn part consists of rolling texture component and recrystallization texture component.The intensity and type of the initial texture varied during the drawing process are related to the production of deformation twinning and dislocation slip.Twinning weakens the initial texture by randomizing the orientations of crystals,especially for the recrystallization texture.The recrystallization texture in the drawing region disappears due to the significant forming of twinning.Furthermore,over drawing would result in the predominance of dislocation slip and the texture is strengthened.展开更多
基金support from the Science and Technology Key Project of Beijing Polytechnic(Project Leader:Jinru Ma,No.2024X008-KXZ).
文摘With the economic and social development of the country,vocational education is playing an increasingly significant role in cultivating highly skilled talents.However,the mechanical drawing courses in vocational colleges still face numerous challenges in the teaching process,such as outdated textbook content,inadequate practical resources,weak teaching staff,and low student interest.This paper aims to explore these issues and propose corresponding coping strategies.The findings of this study not only provide specific improvement suggestions for vocational colleges but also emphasize the importance of these strategies in enhancing students’comprehensive abilities and promoting the development of vocational education.By addressing these challenges,this paper contributes to the enhancement of teaching quality and the overall advancement of vocational skills education.
基金the Fundamental Research Funds for the Central Universities(2023YQTD02)National Key R&D Program of China(2023YFC2907501)。
文摘To address issues such as inefficient top-coal drawing,challenges in simultaneously mining and drawing,and the need for intelligent control in extra-thick coal seams,this study examines the principles of top-coal drawing and explores automation and intelligent equipment solutions within the framework of the group coal drawing method.Numerical simulations were performed to investigate the impact of the Number of Drawing Openings(NDO)and rounds on top-coal recovery,coal draw-ing efficiency,and Top Coal Loss(TCL)mechanism.Subsequently,considering the recovery and coal drawing efficiency and by introducing the instantaneous gangue content and cumulative gangue content in simulations,the top-coal recovery,gangue content,and coal loss distribution when considering excessive coal drawing were analyzed.This established a foun-dation for determining the optimal NDO and shutdown timing.Finally,the key technical principle and automated control of a shock vibration and hyperspectral fusion recognition device were detailed,and an intelligent coal drawing control method based on this technology was developed.This technology enabled the precise control of the instantaneous gangue content(35%)during coal drawing.The top-coal recovery at the Tashan Mine 8222 working face increased by 14.78%,and the gangue content was controlled at~9%,consistent with the numerical simulation results.Thus,the reliability of the numerical simulation results was confirmed to a certain extent.Meanwhile,the single-group drawing method significantly enhanced the production capacity of the 8222 working face,achieving an annual output of 15 million tons.
文摘With the development and popularization of computer application technology,the use of computer graphics and image processing technology has become the main means of modern engineering design and drawing.Learning and mastering 3D modeling technology and mechanical information modeling technology have become an important goal of learning engineering drawing.To meet the teaching requirements of the“New Engineering”program,higher education should cultivate innovative talents with the ability to identify,express,analyze,and solve complex engineering problems;promote the transformation of teaching methods for the course of“Mechanical Drawing and Computer Drawing”from“teaching well”to“learning well.”This change is not only a change in course content,but also a change in training objectives.It introduces modern 3D design concepts into the drawing course,constructs a learning system with 3D modeling technology as the main line,solves the problem of imagination in traditional teaching,makes the learning process more in line with scientific cognitive laws,better meets the needs of modern manufacturing industry for new technologies,and improves students’drawing skills and ability to use modern tools(computer drawing).
基金support provided by the National Natural Science Foundation of China(Nos.52405364,and 52171110)the Jiangsu Funding Program for Excellent Postdoctoral Talent.W.Huo acknowledges the support from the European Union Horizon 2020 Research and Innovation Program(No.857470)+1 种基金from the European Regional Development Fund via the Foundation for Polish Science International Research Agenda PLUS Program(No.MAB PLUS/2018/8)The publication was partly created within the framework of the project of the Minister of Science and Higher Education"Support for the activities of Centers of Excellence established in Poland under Horizon 2020"(No.MEiN/2023/DIR/3795).
文摘The effects of drawing strain during intermediate annealing on the microstructure and properties of Cu-20 wt%Fe alloy wires while maintaining constant total deformation were investigated.Intermediate annealing effectively removes work hardening in both the Cu matrix and Fe fibers,restoring their plastic deformation capacity and preserving fiber continuity during subsequent redrawing.The process also refines the Fe phase,leading to a more uniform size distribution and straighter,better-aligned Cu/Fe phase interfaces,thereby enhancing the comprehensive properties of the alloy.The magnitude of drawing strain during intermediate annealing plays a critical role in balancing the mechanical strength and electrical conductivity of redrawn wires.A lower initial drawing strain requires greater redrawing strain,leading to excessive hardening of the Fe fibers,which negatively impacts the electrical conductivity and tensile plasticity.Conversely,a higher initial drawing strain can result in insufficient work hardening during the redrawing deformation process,yielding minimal strength improvements.Among the tested alloys,H/3.5 wires show a slight reduction in strength and hardness compared to W and H/4.5 wires but exhibit a significant increase in tensile elongation and electrical conductivity.The tensile strength was 755 MPa,and the electrical conductivity was 47%international-annealed copper standard(IACS).The optimal performance is attributed to the formation of a high-density,ultrafine Fe fiber structure-aligned parallel to the drawing direction,which is achieved through a suitable combination of the drawing process and intermediate annealing.
基金Project supported by“Unveiled the List of Commanders”Key Core Common Technology Projects of Ji’an,ChinaProject(LJKMZ20220591)supported by the Basic Scientific Research Project of the Education Department of Liaoning Province,ChinaProject(CSTB2023NSCQ-LZX0116)supported by the Natural Science Foundation Joint Fund for Innovation and Development Projects of Chongqing,China。
文摘The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.
基金funded by the Chinese State Grid Jiangsu Electric Power Co.,Ltd.Science and Technology Project Funding,Grant Number J2023031.
文摘Accurate vector extraction from design drawings is required first to automatically create 3D models from pixel-level engineering design drawings. However, this task faces the challenges of complicated design shapes as well as cumbersome and cluttered annotations on drawings, which interfere with the vector extraction heavily. In this article, the transmission tower containing the most complex structure is taken as the research object, and a semantic segmentation network is constructed to first segment the shape masks from the pixel-level drawings. Preprocessing and postprocessing are also proposed to ensure the stability and accuracy of the shape mask segmentation. Then, based on the obtained shape masks, a vector extraction network guided by heatmaps is designed to extract structural vectors by fusing the features from node heatmap and skeleton heatmap, respectively. Compared with the state-of-the-art methods, experiment results illustrate that the proposed semantic segmentation method can effectively eliminate the interference of many elements on drawings to segment the shape masks effectively, meanwhile, the model trained by the proposed vector extraction network can accurately extract the vectors such as nodes and line connections, avoiding redundant vector detection. The proposed method lays a solid foundation for automatic 3D model reconstruction and contributes to technological advancements in relevant fields.
文摘Magnesium alloy,the lightest structural metal substance currently known,has garnered a great deal of interest in recent times.Magnesium alloys not only offer high specific strength,high specific stiffness,and low density,but they also have outstanding anti-electromagnetic interference properties,shock absorption,are easy to recycle,and are biocompatible.It has a wide range of uses,including automotive,aerospace,military,and biological.Magnesium alloy’s compact hexagonal structure creates few slip systems at room temperature,leading to low plasticity and limited applicability.Deep drawing of magnesium alloys is a major procedure in the aerospace and automotive sectors due to the high strength-to-weight ratio.This paper presents all the aspects of deep drawing of magnesium alloys,covering the innovative methods of deep drawing,factors influencing the performance of deep drawing,simulation and modeling,optimization of deep drawing,and the microstructural changes during deep drawing and its impact on mechanical properties.Finally,the challenges and scope for future research are explored.
基金Projects(51975398,52105392)supported by the National Natural Science Foundation of ChinaProject(YDZJSX2021A006)supported by the Central Government Guided Local Science and Technology Development Fund Project,China+1 种基金Project(20210035)supported by the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Province,ChinaProject(2020-037)supported by the Fund Program for the Research Project Supported by Shanxi Scholarship Council,China。
文摘In the present study,two-layered stainless steel-copper composites with a thickness of 50μm were initially subjected to annealing at 800,900 and 1000℃for 5 min,respectively,to achieve diverse microstructural features.Then the influence of annealing temperature on the formability of stainless steel-copper composites and the quality of micro composite cups manufactured by micro deep drawing(MDD)were investigated,and the underlying mechanism was analyzed.Three finite element(FE)models,including basic FE model,Voronoi FE model and surface morphological FE model,were developed to analyze the forming performance of stainless steel-copper composites during MDD.The results show that the stainless steel-copper composites annealed at 900℃possess the best plasticity owing to the homogeneous and refined microstructure in both stainless steel and copper matrixes,and the micro composite cup with specimen annealed at 900℃exhibits a uniform wall thickness as well as high surface quality with the fewest wrinkles.The results obtained from the surface morphological FE model considering material inhomogeneity and surface morphology of the composites are the closest to the experimental results compared to the basic and Voronoi FE model.During MDD process,the drawing forces decrease with increasing annealing temperature as a consequence of the strength reduction.
基金supported by the National Natural Science Foundations of China[No.52374395,52474419]Natural Science Foundation of Chongqing[CSTB2024NSCQMSX0267]+6 种基金the Natural Science Foundation of Shanxi province[No.20210302123135,20210302123163]the China Postdoctoral Science Foundation[No.2022M710541]the Research Project Supported by Shanxi Scholarship Council of China[No.2022-038]Scientific and Technological Achievements Transformation Guidance Special Project of Shanxi Province[202104021301022,202204021301009]the Ministry of Science and Higher Education of the Russian Federation for financial support under the Megagrant[no.075-15-2022-1133]he National Research Foundation(NRF)grant funded by the Ministry of Science and ICT[2015R1A2A1A01006795]Korea through the Research Institute of Advanced Materials.
文摘In this work,the{10–12}tensile twins are introduced to improve the drawability of the AZ31 Mg alloy sheet.Concretely,the drawing depth is increased by 32%compared with the as-received sheet at 200℃.This is because{10–12}tensile twins promote the occurrences of many deformation mechanisms during warm deep drawing,such as slips,detwinning,dynamic recrystallization(DRX)behaviors,etc.Further,based on the different stress states during deep drawing,these mechanisms and their competition relationships,as well as texture evolutions,are systematically studied.Combined with critical resolved shear stress(CRSS)and microstructure evolution,the global Schmid factor(GSF)obtained by quantizing stress states by stress tensor(σ)can accurately predict the activation trend of deformation mechanisms.It is found that the stress states have a reverse influence on the activation trend of the{10–12}twinning and detwinning.The change of stress states affects the competitive relationships between detwinning and DRX,and then affects the process and degree of DRX.The{10–12}tensile twins and large plane strain promote the activation of prismatic slips,and the larger plane strain also deflected the{10–12}twinning lattice.The{10–12}tensile twins and their induced deformation mechanisms can prominently weaken the basal texture and improve the drawability.
基金the National Natural Science Foundation of China(Nos.U21A2051,52173297,52071133)the R&D Projects of Henan Academy of Sciences of China(No.220910009)+2 种基金the Key R&D and Promotion Projects of Henan Province of China(No.212102210441)the Joint Fund of Henan Science and Technology R&D Plan of China(No.222103810037)the Zhongyuan Scholar Workstation Funded Project of China(No.214400510028).
文摘A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(Nos.2020R1A2C2010986,2022M3H4A1A04085301)。
文摘In this study,a numerical analysis was conducted on the ductile fracture of a 2-mm diameter Mg-1Zn-0.5Mn-0.5Sr-0.1Ca alloy wire during drawing.The hexagonally close-packed crystal structure of Mg alloys causes asymmetric fracture behavior,especially in the compression region.The aim of this study is to develop a comprehensive damage model for Mg alloy wire that accurately predicts ductile fracture,with a focus on the compression region.A novel experimental method was introduced to measure the ductile fracture of Mg alloy wires under different stress states.The wire drawing process was simulated using the Generalized Incremental Stress-State dependent damage(GISSMO)Model and the Semi-Analytical Model for Polymers(SAMP)model.The damage model's prediction and the experimental results were found to be in excellent agreement,especially in determining crack initiation.Computational analysis established a safe zone diagram for die angle and reduction ratio,and experimental validation confirmed the feasibility of this approach.The proposed damage model can provide a practical and reliable analysis for optimizing the drawing process of Mg alloy wire.
基金supported by the Beijing Natural Science Foundation(No.2232059)the National Natural Science Foundation of China(Nos.52121003,52374148,52204163 and 51934008)+1 种基金the Fundamental Research Funds for the Central Universities(Nos.2023JCCXNY04 and 2023YQTD02)the Open Fund of Key laboratory of Xinjiang Coal Resources Green Mining,Ministry of Education(No.KLXGY-KB2408)。
文摘The sublevel top coal caving(SLTCC)mining technology is extensively employed in steeply inclined thick coal seams.Because of the typical characteristics of the short coal face in this mining method,a signifi-cant portion of the top coal is lost at the face end.For reducing the coal loss,the partially reverse drawing technique(PRDT)is proposed as a novel top coal drawing technique.Meanwhile,based on the Bergmark-Roos model(B-R model),a theoretical method for calculating the recovery ratio of top coal based on the top coal boundary equation and residual top coal amount is proposed.The mechanism of PRDT to reduce top coal loss at the face end is revealed by comparing with single-round sequential drawing technique(SSDT).Physical experiments and in-site observation data were used to verify the theoretical model.The results show that PRDT can effectively reduce the amount of residual coal near the roof by optimizing the shape characteristics of top coal boundary.Suggestions for improve recovery ratio in Wudong Coal Mine were given based on its face parameters.
文摘Accurately predicting environmental parameters in solar greenhouses is crucial for achieving precise environmental control.In solar greenhouses,temperature,humidity,and light intensity are crucial environmental parameters.The monitoring platform collected data on the internal environment of the solar greenhouse for one year,including temperature,humidity,and light intensity.Additionally,meteorological data,comprising outdoor temperature,outdoor humidity,and outdoor light intensity,was gathered during the same time frame.The characteristics and interrelationships among these parameters were investigated by a thorough analysis.The analysis revealed that environmental parameters in solar greenhouses displayed characteristics such as temporal variability,non-linearity,and periodicity.These parameters exhibited complex coupling relationships.Notably,these characteristics and coupling relationships exhibited pronounced seasonal variations.The multi-parameter multi-step prediction model for solar greenhouse(MPMS-SGH)was introduced,aiming to accurately predict three key greenhouse environmental parameters,and the model had certain seasonal adaptability.MPMS-SGH was structured with multiple layers,including an input layer,a preprocessing layer,a feature extraction layer,and a prediction layer.The input layer was used to generate the original sequence matrix,which included indoor temperature,indoor humidity,indoor light intensity,as well as outdoor temperature and outdoor light intensity.Then the preprocessing layer normalized,decomposed,and positionally encoded the original sequence matrix.In the feature extraction layer,the time attention mechanism and frequency attention mechanism were used to extract features from the trend component and the seasonal component,respectively.Finally,the prediction layer used a multi-layer perceptron to perform multi-step prediction of indoor environmental parameters(i.e.temperature,humidity,and light intensity).The parameter selection experiment evaluated the predictive performance of MPMS-SGH on input and output sequences of different lengths.The results indicated that with a constant output sequence length,the prediction accuracy of MPMS-SGH was firstly increased and then decreased with the increase of input sequence length.Specifically,when the input sequence length was 100,MPMS-SGH had the highest prediction accuracy,with RMSE of 0.22℃,0.28%,and 250lx for temperature,humidity,and light intensity,respectively.When the length of the input sequence remained constant,as the length of the output sequence increased,the accuracy of the model in predicting the three environmental parameters was continuously decreased.When the length of the output sequence exceeded 45,the prediction accuracy of MPMS-SGH was significantly decreased.In order to achieve the best balance between model size and performance,the input sequence length of MPMS-SGH was set to be 100,while the output sequence length was set to be 35.To assess MPMS-SGH’s performance,comparative experiments with four prediction models were conducted:SVR,STL-SVR,LSTM,and STL-LSTM.The results demonstrated that MPMS-SGH surpassed all other models,achieving RMSE of 0.15℃for temperature,0.38%for humidity,and 260lx for light intensity.Additionally,sequence decomposition can contribute to enhancing MPMS-SGH’s prediction performance.To further evaluate MPMS-SGH’s capabilities,its prediction accuracy was tested across different seasons for greenhouse environmental parameters.MPMS-SGH had the highest accuracy in predicting indoor temperature and the lowest accuracy in predicting humidity.And the accuracy of MPMS-SGH in predicting environmental parameters of the solar greenhouse fluctuated with seasons.MPMS-SGH had the highest accuracy in predicting the temperature inside the greenhouse on sunny days in spring(R^(2)=0.91),the highest accuracy in predicting the humidity inside the greenhouse on sunny days in winter(R^(2)=0.83),and the highest accuracy in predicting the light intensity inside the greenhouse on cloudy days in autumm(R^(2)=0.89).MPMS-SGH had the lowest accuracy in predicting three environmental parameters in a sunny summer greenhouse.
基金Exploration and Practice of the Ideological and Political Teaching Mode Based on the“One Core,Two Lines,Four Dimensions”Curriculum:Taking the“Concrete Flat Construction Drawing Interpretation”Course as an Example(Z233315S)。
文摘This paper first deeply interprets the connotation of the“One Core,Two Lines,Four Dimensions”ideological and political teaching model in courses.Then,it explores the significant meaning of integrating this teaching model into the Interpretation of Concrete Plane Construction Drawings course.Finally,based on the challenges faced in this work,corresponding educational countermeasures are proposed to help improve the effectiveness and quality of ideological and political construction in the Interpretation of Concrete Plane Construction Drawings course and enhance the level of talent cultivation.
基金supported by the National Natural Science Foundation of China(Grant Nos.62171144and 62031024)Guangxi Science Foundation(Grant Nos.2025GXNSFAA069137 and GXR-1BGQ2424005)Innovation Project of Guangxi Graduate Education(Grant No.YCBZ2025064)。
文摘The advantage distillation(AD)technology has been proven to effectively improve the secret key rate and the communication distance of quantum key distribution(QKD).The mode-pairing quantum key distribution(MP-QKD)protocol can overcome a fundamental physical limit,known as the Pirandola-Laurenza-Ottaviani-Banchi bound,without requiring global phase-locking.In this work,we propose a method based on multi-step AD to further enhance the performance of MP-QKD.The simulation results show that,compared to one-step AD,multi-step AD achieves better performance in long-distance scenarios and can tolerate a higher quantum bit error rate.Specifically,when the difference between the communication distances from Alice and Bob to Charlie is 25 km,50 km and 75 km,and the corresponding transmission distance exceeds 523 km,512 km and 496 km,respectively,the secret key rate achieved by multi-step AD surpasses that of one-step AD.Our findings indicate that the proposed method can effectively promote the application of MP-QKD in scenarios with high loss and high error rate.
基金support provided by National Natural Science Foundation of China(Nos.52405364 and 52171110)Jiangsu Funding Program for Excellent Postdoctoral Talent+3 种基金JITRI Advanced Materials R&D Co.Ltdsupport by European Union Horizon 2020 Research and Innovation Program(857470)European Regional Development Fund via the Foundation for Polish Science International Research Agenda PLUS program(MAB PLUS/2018/8)The publication was created within the framework of the project of the Minister of Science and Higher Education,Support for the Activities of Centres of Excellence established in Poland under Horizon 2020,under contract No.MEiN/2023/DIR/3795.
文摘The deformation of Cu–20 wt.%Fe alloy wires leads to a significant improvement in mechanical properties and a decrease in electrical conductivity.Simultaneous improvements in strength and conductivity were achieved by intermediate annealing of drawn Cu–20 wt.%Fe wires.As the annealing temperature increased,the strength of Cu–20 wt.%Fe alloy wire decreased monotonically,but the electrical conductivity first increased and then decreased,reaching its peak value after annealing at 500℃.The decrease in strength is related to dislocation recovery and static recrystallization of Cu and Fe phases,and the increase in electrical conductivity mainly results from the aging precipitation of solid solution Fe.After annealing at 500℃,there was no obvious recrystallization of Cu phase,and many of the nano-Fe particles precipitated from Cu matrix.An annealing temperature of 600℃ induced the recrystallization of Cu matrix and an increase in Fe solid solubility,resulting in a decrease in strength and electrical conductivity.Subsequently,the wires annealed at 500℃ were drawn to 2 mm.Compared with those of the continuously drawn Cu–20 wt.%Fe alloy wires,the deformation ability,strength,and electrical conductivity of Cu–20 wt.%Fe alloy wires subjected to intermediate annealing treatment are significantly greater.This is mainly related to the sufficient precipitation of Fe in Cu matrix and the strengthening of refined Fe fibers parallel to the drawing direction.
基金supported by the Natural Science Foundation of Shandong Province(ZR2021MA019)the National Natural Science Foundation of China(11871312)。
文摘In this paper,a composite numerical scheme is proposed to solve the threedimensional Darcy-Forchheimer miscible displacement problem with positive semi-definite assumptions.A mixed finite element is used for the fow equation.The velocity and pressure are computed simultaneously.The accuracy of velocity is improved one order.The concentration equation is solved by using mixed finite element,multi-step difference and upwind approximation.A multi-step method is used to approximate time derivative for improving the accuracy.The upwind approximation and an expanded mixed finite element are adopted to solve the convection and diffusion,respectively.The composite method could compute the diffusion flux and its gradient.It possibly becomes an eficient tool for solving convection-dominated diffusion problems.Firstly,the conservation of mass holds.Secondly,the multi-step method has high accuracy.Thirdly,the upwind approximation could avoid numerical dispersion.Using numerical analysis of a priori estimates and special techniques of differential equations,we give an error estimates for a positive definite problem.Numerical experiments illustrate its computational efficiency and feasibility of application.
基金funded by National Natural Science Foundation of China(52201084 and 52231003)Major Program(JD)of Hubei Province(2023BAA019)+2 种基金China Scholarship Council(CSC)Postdoctoral Station of metallurgical Engineering of Wuhan University of Science and Technology(WUST)Postdoctoral workstation of Zhejiang Jincheng New Material Co.,Ltd.
文摘304H austenitic stainless steel wire was investigated,emphasizing microstructural deformation,martensite phase transformation,and residual magnetic properties during drawing.Utilizing several microstructural observation techniques,the volume fraction of martensite,modes of grain deformation in distinct regions,and the phase relationship between austenite and martensite were comprehensively characterized.In addition,a finite element simulation with representative volume elements specific to different zones also offers insights into strain responses during the drawing process.Results from the first-pass drawing reveal that there exists a higher volume fraction of martensite in the central region of 304H austenitic stainless steel wire compared to edge areas.This discrepancy is attributed to a concentrated presence of shear slip system{111}<110>γcrystallographic orientation,primarily accumulating in the central region obeying the Kurdjumov-Sachs path.Subsequent to the second drawing pass,the cumulative shear deformation within distinct regions of the steel wire became more pronounced.This resulted in a progressive augmentation of the volume fraction of martensite in both the central and peripheral regions of the steel wire.Concurrently,this led to a discernible elevation in the overall residual magnetism of the steel wire.
基金Project(U0834002)supported by the Joint Funds of NSFC-Guangdong of ChinaProject(2009ZM0121)supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(LYM09024)supported by Training Program for Excellent Young Teachers with Innovation of Guangdong University,China
文摘Using high-speed oil-filled spinning method,high quality micro copper tube with straight grooves（MCTSG） with an outer diameter of 6 mm was obtained.Then,MCTSG with an outer diameter of 3-6 mm was fabricated successfully by multi-pass drawing processing method.The influence of drawing parameters on the forming of micro straight grooves was investigated based on the forming mechanism.The results show that the values of groove depth and width decrease,while the wall thickness increases as the drawing diameter decreases.At the same time,the groove depth and width increase,while the wall thickness decreases as the die angle increases.The drawing force increases as the reduction increases.Excessive copper tube reduction may results in groove folding and segmental teeth.The drawing force decreases firstly and then increases with the increases in die angle.When the die angle α is 16°,the drawing force is the smallest,indicating 16° is the optimal angle.
基金Project(SKLSP200906) supported by the Fund of State Key Laboratory of Solidification Processing in NWPUProject(B08040) supported by Program of Introducing Talents of Discipline in the Project of Advanced Materials and Their Forming Technology
文摘The development of microstructure and texture during cold deep drawing of commercially pure titanium（CP-Ti） was investigated.Three parts,stretching region,drawing region and flange region,were sequentially formed in the deep drawing process of the hemispheric surface part,with reference to deformation modes and strain regimes.Results show that the plastic strain is accommodated by dislocation slip and deformation twinning in the whole deep drawing process.The texture of the CP-Ti sheet and its drawn part consists of rolling texture component and recrystallization texture component.The intensity and type of the initial texture varied during the drawing process are related to the production of deformation twinning and dislocation slip.Twinning weakens the initial texture by randomizing the orientations of crystals,especially for the recrystallization texture.The recrystallization texture in the drawing region disappears due to the significant forming of twinning.Furthermore,over drawing would result in the predominance of dislocation slip and the texture is strengthened.
