In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, w...In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, which considers the influence of viscous flow, Knudsen diffusion, surface diffusion, and adsorption layer thickness. A dis- crete-fracture model is used to simplify the fracture mod- cling, and a finite element method is applied to solve the model. The numerical simulation results indicate that with a decrease in the intrinsic matrix permeability, Knudsen diffusion and surface diffusion contributions to production become large and cannot be ignored. The existence of an adsorption layer on the nanopore surfaces reduces the effective pore radius and the effective porosity, resulting in low production from fractured horizontal wells. With a decrease in the pore radius, considering the adsorption layer, the production reduction rate increases. When the pore radius is less than 10 nm, because of the combined impacts of Knudsen diffusion, surface diffusion, and adsorption layers, the production of multi-stage fractured horizontal wells increases with a decrease in the pore pressure. When the pore pressure is lower than 30 MPa, the rate of production increase becomes larger with a decrease in pore pressure.展开更多
Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current ev...Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current evidence on diagnostic protocols and management strategies,highlighting optimal approaches and emerging trends.Initial care emphasizes soft tissue assessment,often guided by the Tscherne classification,and fracture classification systems.External fixation may be required in open injuries,while early open reduction and internal fixation within six days is linked to improved outcomes.Minimally invasive techniques for the lateral malleolus,including intramedullary nailing and locking plates,are effective,while medial malleolus fractures are commonly managed with screw fixation or tension-band wiring.Posterior malleolus fragments involving more than 25%of the articular surface usually warrant fixation.Alternatives to syndesmotic screws,such as cortical buttons or high-strength sutures,reduce the need for secondary procedures.Arthroscopic-assisted open reduction and internal fixation benefits younger,active patients by enabling concurrent management of intra-articular and ligamentous injuries.Postoperative care prioritizes early weight-bearing and validated functional scores.Despite advances,complications remain common,and further research is needed to refine surgical strategies and improve outcomes.展开更多
Surface polaritons,as surface electromagnetic waves propagating along the surface of a medium,have played a crucial role in enhancing photonic spin Hall effect(PSHE)and developing highly sensitive refractive index(RI)...Surface polaritons,as surface electromagnetic waves propagating along the surface of a medium,have played a crucial role in enhancing photonic spin Hall effect(PSHE)and developing highly sensitive refractive index(RI)sensors.Among them,the traditional surface plasmon polariton(SPP)based on noble metals limits its application beyond the near-infrared(IR)regime due to the large negative permittivity and optical losses.In this contribution,we theoretically proposed a highly sensitive PSHE sensor with the structure of Ge prism-SiC-Si:InAs-sensing medium,by taking advantage of the hybrid surface plasmon phonon polariton(SPPhP)in mid-IR regime.Here,heavily Si-doped InAs(Si:InAs)and SiC excite the SPP and surface phonon polariton(SPhP),and the hybrid SPPhP is realized in this system.More importantly,the designed PSHE sensor based on this SPPhP mechanism achieves the multi-stage RI measurements from 1.00025-1.00225 to 1.70025-1.70225,and the maximal intensity sensitivity and angle sensitivity can be up to 9.4×10^(4)μm/RIU and245°/RIU,respectively.These findings provide a new pathway for the enhancement of PSHE in mid-IR regime,and offer new opportunities to develop highly sensitive RI sensors in multi-scenario applications,such as harmful gas monitoring and biosensing.展开更多
The Gabes aquifer system,located in southeastern Tunisia,is a crucial resource for supporting local socio-economic activities.Due to its dual porosity structure,is particularly vulnerable to pollution.This study aims ...The Gabes aquifer system,located in southeastern Tunisia,is a crucial resource for supporting local socio-economic activities.Due to its dual porosity structure,is particularly vulnerable to pollution.This study aims to develop a hybrid model that combines the Fracture Aquifer Index(FAI)with the conventional GOD(Groundwater occurrence,Overall lithology,Depth to water table)method,to assess groundwater vulnerability in fractured aquifer.To develop the hybrid model,the classical GOD method was integrated with FAI to produce a single composite index.Each parameter within both GOD and FAI was scored,and a final index was calculated to delineate vulnerable areas.The results show that the study area can be classified into four vulnerability levels:Very low,low,moderate,and high,indicating that approximately 8%of the area exhibits very low vulnerability,29%has low vulnerability,25%falls into the moderate category,and 38%is considered highly vulnerable.The FAI-GOD model further incorporates fracture network characteristics.This refinement reduces the classification to three vulnerability classes:Low,medium,and high.The outcomes demonstrate that 46%of the area is highly vulnerable due to a dense concentration of fractures,while 17%represents an intermediate zone characterized by either shallow or deeper fractures.In contrast,37%corresponds to areas with lightly fractured rock,where the impact on vulnerability is minimal.Multivariate statistical analysis was employed using Principal Components Analysis(PCA)and Hierarchical Cluster Analysis(HCA)on 24 samples across six variables.The first three components account for over 76%of the total variance,reinforcing the significance of fracture dynamics in classifying vulnerability levels.The FAI-GOD model removes the very-low-vulnerability class and expands the spatial extent of low-and high-vulnerability zones,reflecting the dominant influence of fracture networks on aquifer sensitivity.While both indices use a five-class system,FAI-GOD redistributes vulnerability by eliminating very-low-vulnerability areas and amplifying low/high categories,highlighting the critical role of fractures.A strong correlation(R2=0.94)between the GOD and FAI-GOD indices,demonstrated through second-order polynomial regression,confirms the robustness of the FAI-GOD model in accurately predicting vulnerability to pollution.This model provides a useful framework for assessing the vulnerability of complex aquifers and serves as a decision-making tool for groundwater managers in similar areas.展开更多
BACKGROUND Ankle fractures are well-documented in snow sports,but concomitant Achilles tendon and peroneal tendon ruptures are rare.This case report presents a previously unreported combination of Achilles tendon rupt...BACKGROUND Ankle fractures are well-documented in snow sports,but concomitant Achilles tendon and peroneal tendon ruptures are rare.This case report presents a previously unreported combination of Achilles tendon rupture,peroneal tendon rupture,and fibular fracture in a snowboarder,highlighting the complex nature of diagnosis,management,and rehabilitation.CASE SUMMARY A 50-year-old male snowboarder presented with severe right ankle pain following a high speed tumbling crash.Initial evaluation revealed an Achilles tendon rupture and a non-displaced distal lateral malleolus fracture.Subsequent magnetic resonance imaging confirmed complete tears of the Achilles tendon and both peroneus longus and brevis tendons,along with a Weber A lateral malleolus fracture.Surgical intervention included a 4-suture core Kraków repair of the Achilles tendon with calcaneal docking,open reduction and internal fixation of the distal fibula fracture,and primary repair of both peroneal tendons.Postoperatively,a modified Achilles repair protocol was implemented.At 16 weeks post-surgery,radiographs showed a well-healed fibular fracture,and physical examination confirmed intact Achilles and peroneal tendon repairs.By 6 months,the patient had regained full daily and work activities,including recreational pursuits.CONCLUSION This case underscores the importance of maintaining a high index of suspicion for concomitant injuries in high-energy ankle trauma during snow sports.Timely advanced imaging and a comprehensive surgical approach are crucial for optimal outcomes in such complex cases.展开更多
BACKGROUND Humeral shaft fractures are common and vary by age,with high-energy trauma observed in younger adults and low-impact injuries in older adults.Radial nerve palsy is a frequent complication.Treatment ranges f...BACKGROUND Humeral shaft fractures are common and vary by age,with high-energy trauma observed in younger adults and low-impact injuries in older adults.Radial nerve palsy is a frequent complication.Treatment ranges from nonoperative methods to surgical interventions such as intramedullary K-wires,which promote faster rehabilitation and improved elbow mobility.AIM To evaluate the outcomes of managing humeral shaft fractures using closed reduction and internal fixation with flexible intramedullary K-wires.METHODS This was a retrospective cohort study analyzing the medical records of patients with humeral shaft fractures managed with flexible intramedullary K-wires at King Abdulaziz Medical City,using non-random sampling and descriptive analysis for outcome evaluation.RESULTS This study assessed the clinical outcomes of 20 patients treated for humeral shaft fractures with intramedullary K-wires.Patients were predominantly male(n=16,80%),had an average age of 39.2 years,and a mean body mass index of 29.5 kg/m^(2).The fractures most frequently occurred in the middle third of the humerus(n=14,70%),with oblique fractures being the most common type(n=7,35%).All surgeries used general anesthesia and a posterior approach,with no intraoperative complications reported.Postoperatively,all patients achieved clinical and radiological union(n=20,100%),and the majority(n=13,65%)reached an elbow range of motion from 0 to 150 degrees.CONCLUSION These results suggest that intramedullary K-wire fixation may be an effective option for treating humeral shaft fractures,with favorable outcomes in range of motion recovery,fracture union,and a low rate of intraoperative complications.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains chall...Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.展开更多
To resolve the issue of design for multi-stage and multi-cluster fracturing in multi-zone reservoirs, a new efficient algorithm for the planar 3 D multi-fracture propagation model was proposed. The model considers flu...To resolve the issue of design for multi-stage and multi-cluster fracturing in multi-zone reservoirs, a new efficient algorithm for the planar 3 D multi-fracture propagation model was proposed. The model considers fluid flow in the wellbore-perforation-fracture system and fluid leak-off into the rock matrix, and uses a 3 D boundary integral equation to describe the solid deformation. The solid-fluid coupling equation is solved by an explicit integration algorithm, and the fracture front is determined by the uniform tip asymptotic solutions and shortest path algorithm. The accuracy of the algorithm is verified by the analytical solution of radial fracture, results of the implicit level set algorithm, and results of organic glass fracturing experiment. Compared with the implicit level set algorithm(ILSA), the new algorithm is much higher in computation speed. The numerical case study is conducted based on a horizontal well in shale gas formation of Zhejiang oilfield. The impact of stress heterogeneity among multiple clusters and perforation number distribution on multi-fracture growth and fluid distribution among multiple fractures are analyzed by numerical simulation. The results show that reducing perforation number in each cluster can counteract the effect of stress contrast among perforation clusters. Adjusting perforation number in each cluster can promote uniform flux among clusters, and the perforation number difference should better be 1-2 among clusters. Increasing perforation number in the cluster with high in situ stress is conducive to uniform fluid partitioning. However, uniform fluid partitioning is not equivalent to uniform fracture geometry. The fracture geometry is controlled by the stress interference and horizontal principal stress profile jointly.展开更多
A novel laboratory simulation method for modeling multi-staged fracturing in a horizontal well was established based on a true tri-axial hydraulic fracturing simulation system. Using this method, the influences of net...A novel laboratory simulation method for modeling multi-staged fracturing in a horizontal well was established based on a true tri-axial hydraulic fracturing simulation system. Using this method, the influences of net pressure in hydraulic fracture, stage spacing, perforation parameter, horizontal stress bias and well cementation quality on the propagation geometry of multiple fractures in a tight sandstone formation were studied in detail. The specimen splitting and analogy analysis of fracturing curve patterns reveals: Multiple fractures tend to merge under the condition of high horizontal stress bias and short stage spacing with pre-existing hydraulic fractures under critical closure situation, and the propagation of subsequent fractures is possibly suppressed because of high net pressure in pre-created fractures and asymmetric distribution of fracture width. And the subsequently created fractures are situated in the induced stress decreasing zone due to long stage spacing, leading to weak stress interference, and perforation with intense density and deep penetration facilitates the decrease of initiation fracture pressure. The deflection angle of subsequent fracture and horizontal stress variation tend to be amplified under low horizontal bias with constant net pressure in fractures. The longitudinal fracture is likely to be initiated at the interface of wellbore and concrete sample with poor cementation quality. The initiation fracture pressure of the different stages increases in turn, with the largest increase of 30%. Pressure quickly declines after initiation with low propagation pressure when the transverse hydraulic fracture is formed. The pressure reduces with fluctuation after the initiation of fracture when the fracture deflects, the extension pressure is high, and the fracture formed is tortuous and narrow. There is a violently fluctuant rise of pressure with multiple peak values when longitudinal fracture created, and it is hard to distinguish the features between the initiation stage and propagation stage.展开更多
The “well factory” mode's high-density well placement and multi-stage hydraulic fracturing technology enable efficient development of unconventional oil and gas resources.However,the deployment of platform wells...The “well factory” mode's high-density well placement and multi-stage hydraulic fracturing technology enable efficient development of unconventional oil and gas resources.However,the deployment of platform wells in the “well factory” model results in small wellbore spacing,and the stress disturbances caused by fracturing operations may affect neighboring wells,leading to inter-well interference phenomena that cause casing deformation.This study investigates the issue of inter-well interference causing casing deformation or even failure during multi-stage hydraulic fracturing in the “well factory”model,and predicts high-risk locations for casing failure.A flow-mechanics coupled geomechanical finite element model with retaining geological stratification characteristics was established.Based on the theory of hydraulic fracturing-induced rock fragmentation and fluid action leading to the degradation of rock mechanical properties,the model simulated the four-dimensional evolution of multi-well fracturing areas over time and space,calculating the disturbance in the regional stress field caused by fracturing operations.Subsequently,the stress distribution of multiple well casings at different time points was calculated to predict high-risk locations for casing failure.The research results show that the redistribution of the stress field in the fracturing area increases the stress on the casing.The overlapping fracturing zones between wells cause significant stress interference,greatly increasing the risk of deformation and failure.By analyzing the Mises stress distribution of multi-well casings,high-risk locations for casing failure can be identified.The conclusion is that the key to preventing casing failure in platform wells in the “well factory” model is to optimize the spatial distribution of fracturing zones between wells and reasonably arrange well spacing.The study provides new insights and methods for predicting casing failure in unconventional oil and gas reservoirs and offers references for optimizing drilling and fracturing designs.展开更多
In multi-stage hydraulic fracturing,the limited-entry method is widely used to promote uniform growth of multiple fractures.However,this method's effectiveness may be lost because the perforations will be eroded g...In multi-stage hydraulic fracturing,the limited-entry method is widely used to promote uniform growth of multiple fractures.However,this method's effectiveness may be lost because the perforations will be eroded gradually during the fracturing period.In order to study the influence of perforation erosion on multiple growing hydraulic fractures,we combined the solid-fluid coupled model of hydraulic fracture growth with an empirical model of perforation erosion to implement numerical simulation.The simulations show clearly that the erosion of perforation will significantly deteriorate the non-uniform growth of multiple fractures.Based on the numerical model,we also studied the influences of proppant concentration and injection rates on perforation erosion in multi-stage hydraulic fracturing.The results indicate that the initial erosion rates become higher with the rising proppant concentration,but the growth of multiple hydraulic fractures is not sensitive to the varied proppant concentration.In addition,higher injection rates are beneficial significantly to the limited-entry design,leading to more uniform growth of fractures.Thus,in multi-stage hydraulic fracturing enough high injection rates are proposed to keep uniform growths.展开更多
Multi-stage volume fracturing of horizontal wells is the main means to develop tight gas reservoirs.Complex fracture networks of various shapes are generated around the wellbore after volume fracturing.At present,howe...Multi-stage volume fracturing of horizontal wells is the main means to develop tight gas reservoirs.Complex fracture networks of various shapes are generated around the wellbore after volume fracturing.At present,however,most of the well test models suitable for fracturing horizontal wells take all hydraulic fractures as single main fractures,which results in a large error between well test interpretation result and actual situation.As a result,the fracture network characteristic parameters of the stimulated areas cannot be obtained accurately.To this end,a well test model for complex fracture networks in tight-gas fracturing horizontal wells was established on the basis of the non-structural discrete fracture model.Then,this model was solved by using thefinite element method with combined triangular elements and linear elements.And accordingly,the well test type curves of a horizontal well under different fracture network patterns(rectangular,elliptical and hyperbolic)were prepared.Based on this,well test type curves were analyzed from the aspects of characteristics and influential factors and were compared with those obtained from the conventional single-fracture model.Finally,the new model was applied in well test interpretation of one multi-stage volume fracturing horizontal well in the gas reservoir of Permian Shan 1 formation in the Qingyang Gas Field of the Ordos Basin.And the following research results were obtained.First,the biggest difference of well test type curve between the fracture network model and the conventional single-fracture model occurs in the early stage,the characteristics offirst linearflow regime are replaced with the characteristics of pseudo-radialflow regime in the stimulated area.Second,the end time of the pseudo-radialflow regime in the stimulated area is mainly dominated by the size and shape of the stimulated area.The larger the stimulated area is,the longer the pseudo-radialflow regime lasts.As the shape of the stimulated area approaches to be elongated,the characteristics of the well test type curve obtained by the new model are more consistent with those by the single-fracture model.Third,the pressure derivative value of the pseudo-radialflow regime in the stimulated area is mainly dependent on the conductivity and density of the fracture network.The higher the density or the conductivity of fracture network in the stimulated area is,the earlier the wellbore storage effect regime ends,the lower the pressure derivative value of the pseudo-radialflow regime in the stimulated area is and the more obvious the characteristics of the horizontal line are.In conclusion,case study results confirm that the new model is reliable and practical and can provide accurate reservoir parameters as well as the size of the effectively stimulated area by volume fracturing and the conductivity of fracture network,which is conducive to evaluating the stimulation effect of volume fracturing and predicting the postfrac production performance.展开更多
To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fract...To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.展开更多
Particle-fluid two-phase flows in rock fractures and fracture networks play a pivotal role in determining the efficiency and effectiveness of hydraulic fracturing operations,a vital component in unconventional oil and...Particle-fluid two-phase flows in rock fractures and fracture networks play a pivotal role in determining the efficiency and effectiveness of hydraulic fracturing operations,a vital component in unconventional oil and gas extraction.Central to this phenomenon is the transport of proppants,tiny solid particles injected into the fractures to prevent them from closing once the injection is stopped.However,effective transport and deposition of proppant is critical in keeping fracture pathways open,especially in lowpermeability reservoirs.This review explores,then quantifies,the important role of fluid inertia and turbulent flows in governing proppant transport.While traditional models predominantly assume and then characterise flow as laminar,this may not accurately capture the complexities inherent in realworld hydraulic fracturing and proppant emplacement.Recent investigations highlight the paramount importance of fluid inertia,especially at the high Reynolds numbers typically associated with fracturing operations.Fluid inertia,often overlooked,introduces crucial forces that influence particle settling velocities,particle-particle interactions,and the eventual deposition of proppants within fractures.With their inherent eddies and transient and chaotic nature,turbulent flows introduce additional complexities to proppant transport,crucially altering proppant settling velocities and dispersion patterns.The following comprehensive survey of experimental,numerical,and analytical studies elucidates controls on the intricate dynamics of proppant transport under fluid inertia and turbulence-towards providing a holistic understanding of the current state-of-the-art,guiding future research directions,and optimising hydraulic fracturing practices.展开更多
Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. T...Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. The initiation and propagation of hydraulic fractures will cause stress redistribution and may activate natural fractures in the reservoir. Due to the limitation of the analytical method in calculation of induced stresses, we propose a numerical method, which incorporates the interaction of hydraulic fractures and the wellbore, and analyzes the stress distri- bution in the reservoir under different stage spacing. Simulation results indicate the following： （1） The induced stress was overestimated from the analytical method because it did not take into account the interaction between hydraulic fractures and the horizontal wellbore. （2） The hydraulic fracture had a considerable effect on the redis- tribution of stresses in the direction of the horizontal wellbore in the reservoir. The stress in the direction per- pendicular to the horizontal wellbore after hydraulic frac- turing had a minor change compared with the original in situ stress. （3） Stress interferences among fractures were greatly connected with the stage spacing and the distance from the wellbore. When the fracture length was 200 m, and the stage spacing was 50 m, the stress redistribution due to stage fracturing may divert the original stress pat- tern, which might activate natural fractures so as to generate a complex fracture network.展开更多
Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks be...Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.展开更多
BACKGROUND In pediatric age group patients(<18 years old)treated operatively for distal radius/both bone fractures extending imaging beyond the initial postoperative period-particularly in uncomplicated cases-appea...BACKGROUND In pediatric age group patients(<18 years old)treated operatively for distal radius/both bone fractures extending imaging beyond the initial postoperative period-particularly in uncomplicated cases-appears to provide limited additional benefit.AIM To determine the necessary number of follow-up X-rays to use resources efficiently.METHODS Participants included in this study are pediatric age group patients who were treated operatively for distal radius/both bone fractures and were identified from a prospected collected data from the operating room database between the years 2009 and 2017.The data in the study included patients who had distal radius fractures and underwent fixation surgery(n=88).RESULTS When assessing the difference in the odds of conducting 1 or less X-ray compared to 2 or more X-rays in regard to the type of fixation,the only significant difference is the closed reduction fixation method.Patients who underwent closed reduction method procedure have significantly lower odds of having 2 more X-rays compared to those who didn’t have closed reduction method.Open reduction,internal fixation,and other fixation methods(close reduction and internal fixation,debridement,or epiphysiodesis)have higher odds of having two or more X-rays compared to patients who did not receive these methods;however,these odds are not statistically significant.CONCLUSION The findings of this study reveal notable absence of a statistically significant association between the frequency of postoperative X-rays and the outcome of children with distal radius fractures.展开更多
With the increasing demand for energy,traditional oil resources are facing depletion and insufficient supply.Many countries are rapidly turning to the development of unconventional oil and gas resources.Among them,sha...With the increasing demand for energy,traditional oil resources are facing depletion and insufficient supply.Many countries are rapidly turning to the development of unconventional oil and gas resources.Among them,shale oil and gas reservoirs have become the focus of unconventional oil and gas resources exploration and development.Based on the characteristics of shale oil and gas reservoirs,supercritical CO_(2) fracturing is more conducive to improving oil recovery than other fracturing technologies.In this paper,the mechanism of fracture initiation and propagation of supercritical CO_(2) in shale is analyzed,including viscosity effect,surface tension effect,permeation diffusion effect of supercritical CO_(2),and dissolution-adsorption effect between CO_(2) and shale.The effects of natural factors,such as shale properties,bedding plane and natural fractures,and controllable factors,proppant,temperature,pressure,CO_(2) concentration and injection rate on fracture initiation and propagation are clarified.The methods of supercritical CO_(2) fracturing process,thickener and proppant optimization to improve the efficiency of supercritical CO_(2) fracturing are discussed.In addition,some new technologies of supercritical CO_(2) fracturing are introduced.The challenges and prospects in the current research are also summarized.For example,supercritical CO_(2) is prone to filtration when passing through porous media,and it is difficult to form a stable flow state.Therefore,in order to achieve stable fracturing fluid suspension and effectively support fractu res,it is urge nt to explo re new fracturing fluid additives or improve fracturing fluid formulations combined with the research of new proppants.This paper is of great significance for understanding the behavior mechanism of supercritical CO_(2) in shale and optimizing fracturing technology.展开更多
基金supported by the National Natural Science Foundation of China (No. 51234007, No. 51490654, No. 51504276, and No. 51504277)Program for Changjiang Scholars and Innovative Research Team in University (IRT1294)+3 种基金the Natural Science Foundation of Shandong Province (ZR2014EL016, ZR2014EEP018)China Postdoctoral Science Foundation (No. 2014M551989 and No. 2015T80762)the Major Programs of Ministry of Education of China (No. 311009)Introducing Talents of Discipline to Universities (B08028)
文摘In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, which considers the influence of viscous flow, Knudsen diffusion, surface diffusion, and adsorption layer thickness. A dis- crete-fracture model is used to simplify the fracture mod- cling, and a finite element method is applied to solve the model. The numerical simulation results indicate that with a decrease in the intrinsic matrix permeability, Knudsen diffusion and surface diffusion contributions to production become large and cannot be ignored. The existence of an adsorption layer on the nanopore surfaces reduces the effective pore radius and the effective porosity, resulting in low production from fractured horizontal wells. With a decrease in the pore radius, considering the adsorption layer, the production reduction rate increases. When the pore radius is less than 10 nm, because of the combined impacts of Knudsen diffusion, surface diffusion, and adsorption layers, the production of multi-stage fractured horizontal wells increases with a decrease in the pore pressure. When the pore pressure is lower than 30 MPa, the rate of production increase becomes larger with a decrease in pore pressure.
文摘Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current evidence on diagnostic protocols and management strategies,highlighting optimal approaches and emerging trends.Initial care emphasizes soft tissue assessment,often guided by the Tscherne classification,and fracture classification systems.External fixation may be required in open injuries,while early open reduction and internal fixation within six days is linked to improved outcomes.Minimally invasive techniques for the lateral malleolus,including intramedullary nailing and locking plates,are effective,while medial malleolus fractures are commonly managed with screw fixation or tension-band wiring.Posterior malleolus fragments involving more than 25%of the articular surface usually warrant fixation.Alternatives to syndesmotic screws,such as cortical buttons or high-strength sutures,reduce the need for secondary procedures.Arthroscopic-assisted open reduction and internal fixation benefits younger,active patients by enabling concurrent management of intra-articular and ligamentous injuries.Postoperative care prioritizes early weight-bearing and validated functional scores.Despite advances,complications remain common,and further research is needed to refine surgical strategies and improve outcomes.
基金Project supported by the National Natural Science Foundation of China(Grant No.12175107)the Qing Lan Project of Jiangsu Province+2 种基金the Hua Li Talents Program of Nanjing University of PostsTelecommunications,Natural Science Foundation of Nanjing Vocational University of Industry Technology(Grant No.YK22-02-08)the Fund from the Research Center of Industrial Perception and Intelligent Manufacturing Equipment Engineering of Jiangsu Province,China(Grant No.ZK21-05-09)。
文摘Surface polaritons,as surface electromagnetic waves propagating along the surface of a medium,have played a crucial role in enhancing photonic spin Hall effect(PSHE)and developing highly sensitive refractive index(RI)sensors.Among them,the traditional surface plasmon polariton(SPP)based on noble metals limits its application beyond the near-infrared(IR)regime due to the large negative permittivity and optical losses.In this contribution,we theoretically proposed a highly sensitive PSHE sensor with the structure of Ge prism-SiC-Si:InAs-sensing medium,by taking advantage of the hybrid surface plasmon phonon polariton(SPPhP)in mid-IR regime.Here,heavily Si-doped InAs(Si:InAs)and SiC excite the SPP and surface phonon polariton(SPhP),and the hybrid SPPhP is realized in this system.More importantly,the designed PSHE sensor based on this SPPhP mechanism achieves the multi-stage RI measurements from 1.00025-1.00225 to 1.70025-1.70225,and the maximal intensity sensitivity and angle sensitivity can be up to 9.4×10^(4)μm/RIU and245°/RIU,respectively.These findings provide a new pathway for the enhancement of PSHE in mid-IR regime,and offer new opportunities to develop highly sensitive RI sensors in multi-scenario applications,such as harmful gas monitoring and biosensing.
文摘The Gabes aquifer system,located in southeastern Tunisia,is a crucial resource for supporting local socio-economic activities.Due to its dual porosity structure,is particularly vulnerable to pollution.This study aims to develop a hybrid model that combines the Fracture Aquifer Index(FAI)with the conventional GOD(Groundwater occurrence,Overall lithology,Depth to water table)method,to assess groundwater vulnerability in fractured aquifer.To develop the hybrid model,the classical GOD method was integrated with FAI to produce a single composite index.Each parameter within both GOD and FAI was scored,and a final index was calculated to delineate vulnerable areas.The results show that the study area can be classified into four vulnerability levels:Very low,low,moderate,and high,indicating that approximately 8%of the area exhibits very low vulnerability,29%has low vulnerability,25%falls into the moderate category,and 38%is considered highly vulnerable.The FAI-GOD model further incorporates fracture network characteristics.This refinement reduces the classification to three vulnerability classes:Low,medium,and high.The outcomes demonstrate that 46%of the area is highly vulnerable due to a dense concentration of fractures,while 17%represents an intermediate zone characterized by either shallow or deeper fractures.In contrast,37%corresponds to areas with lightly fractured rock,where the impact on vulnerability is minimal.Multivariate statistical analysis was employed using Principal Components Analysis(PCA)and Hierarchical Cluster Analysis(HCA)on 24 samples across six variables.The first three components account for over 76%of the total variance,reinforcing the significance of fracture dynamics in classifying vulnerability levels.The FAI-GOD model removes the very-low-vulnerability class and expands the spatial extent of low-and high-vulnerability zones,reflecting the dominant influence of fracture networks on aquifer sensitivity.While both indices use a five-class system,FAI-GOD redistributes vulnerability by eliminating very-low-vulnerability areas and amplifying low/high categories,highlighting the critical role of fractures.A strong correlation(R2=0.94)between the GOD and FAI-GOD indices,demonstrated through second-order polynomial regression,confirms the robustness of the FAI-GOD model in accurately predicting vulnerability to pollution.This model provides a useful framework for assessing the vulnerability of complex aquifers and serves as a decision-making tool for groundwater managers in similar areas.
文摘BACKGROUND Ankle fractures are well-documented in snow sports,but concomitant Achilles tendon and peroneal tendon ruptures are rare.This case report presents a previously unreported combination of Achilles tendon rupture,peroneal tendon rupture,and fibular fracture in a snowboarder,highlighting the complex nature of diagnosis,management,and rehabilitation.CASE SUMMARY A 50-year-old male snowboarder presented with severe right ankle pain following a high speed tumbling crash.Initial evaluation revealed an Achilles tendon rupture and a non-displaced distal lateral malleolus fracture.Subsequent magnetic resonance imaging confirmed complete tears of the Achilles tendon and both peroneus longus and brevis tendons,along with a Weber A lateral malleolus fracture.Surgical intervention included a 4-suture core Kraków repair of the Achilles tendon with calcaneal docking,open reduction and internal fixation of the distal fibula fracture,and primary repair of both peroneal tendons.Postoperatively,a modified Achilles repair protocol was implemented.At 16 weeks post-surgery,radiographs showed a well-healed fibular fracture,and physical examination confirmed intact Achilles and peroneal tendon repairs.By 6 months,the patient had regained full daily and work activities,including recreational pursuits.CONCLUSION This case underscores the importance of maintaining a high index of suspicion for concomitant injuries in high-energy ankle trauma during snow sports.Timely advanced imaging and a comprehensive surgical approach are crucial for optimal outcomes in such complex cases.
基金approved by King Abdullah International Medical Research Center Ethics Committee(approval No.0000074524).
文摘BACKGROUND Humeral shaft fractures are common and vary by age,with high-energy trauma observed in younger adults and low-impact injuries in older adults.Radial nerve palsy is a frequent complication.Treatment ranges from nonoperative methods to surgical interventions such as intramedullary K-wires,which promote faster rehabilitation and improved elbow mobility.AIM To evaluate the outcomes of managing humeral shaft fractures using closed reduction and internal fixation with flexible intramedullary K-wires.METHODS This was a retrospective cohort study analyzing the medical records of patients with humeral shaft fractures managed with flexible intramedullary K-wires at King Abdulaziz Medical City,using non-random sampling and descriptive analysis for outcome evaluation.RESULTS This study assessed the clinical outcomes of 20 patients treated for humeral shaft fractures with intramedullary K-wires.Patients were predominantly male(n=16,80%),had an average age of 39.2 years,and a mean body mass index of 29.5 kg/m^(2).The fractures most frequently occurred in the middle third of the humerus(n=14,70%),with oblique fractures being the most common type(n=7,35%).All surgeries used general anesthesia and a posterior approach,with no intraoperative complications reported.Postoperatively,all patients achieved clinical and radiological union(n=20,100%),and the majority(n=13,65%)reached an elbow range of motion from 0 to 150 degrees.CONCLUSION These results suggest that intramedullary K-wire fixation may be an effective option for treating humeral shaft fractures,with favorable outcomes in range of motion recovery,fracture union,and a low rate of intraoperative complications.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金supported by the National Key Research and Development Program(2021YFB150740401)National Natural Science Foundation of China(42202336)the CAS Pioneer Hundred Talents Program in China(Y826031C01)。
文摘Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.
基金China National Science and Technology Major Project(2016ZX05023).
文摘To resolve the issue of design for multi-stage and multi-cluster fracturing in multi-zone reservoirs, a new efficient algorithm for the planar 3 D multi-fracture propagation model was proposed. The model considers fluid flow in the wellbore-perforation-fracture system and fluid leak-off into the rock matrix, and uses a 3 D boundary integral equation to describe the solid deformation. The solid-fluid coupling equation is solved by an explicit integration algorithm, and the fracture front is determined by the uniform tip asymptotic solutions and shortest path algorithm. The accuracy of the algorithm is verified by the analytical solution of radial fracture, results of the implicit level set algorithm, and results of organic glass fracturing experiment. Compared with the implicit level set algorithm(ILSA), the new algorithm is much higher in computation speed. The numerical case study is conducted based on a horizontal well in shale gas formation of Zhejiang oilfield. The impact of stress heterogeneity among multiple clusters and perforation number distribution on multi-fracture growth and fluid distribution among multiple fractures are analyzed by numerical simulation. The results show that reducing perforation number in each cluster can counteract the effect of stress contrast among perforation clusters. Adjusting perforation number in each cluster can promote uniform flux among clusters, and the perforation number difference should better be 1-2 among clusters. Increasing perforation number in the cluster with high in situ stress is conducive to uniform fluid partitioning. However, uniform fluid partitioning is not equivalent to uniform fracture geometry. The fracture geometry is controlled by the stress interference and horizontal principal stress profile jointly.
文摘A novel laboratory simulation method for modeling multi-staged fracturing in a horizontal well was established based on a true tri-axial hydraulic fracturing simulation system. Using this method, the influences of net pressure in hydraulic fracture, stage spacing, perforation parameter, horizontal stress bias and well cementation quality on the propagation geometry of multiple fractures in a tight sandstone formation were studied in detail. The specimen splitting and analogy analysis of fracturing curve patterns reveals: Multiple fractures tend to merge under the condition of high horizontal stress bias and short stage spacing with pre-existing hydraulic fractures under critical closure situation, and the propagation of subsequent fractures is possibly suppressed because of high net pressure in pre-created fractures and asymmetric distribution of fracture width. And the subsequently created fractures are situated in the induced stress decreasing zone due to long stage spacing, leading to weak stress interference, and perforation with intense density and deep penetration facilitates the decrease of initiation fracture pressure. The deflection angle of subsequent fracture and horizontal stress variation tend to be amplified under low horizontal bias with constant net pressure in fractures. The longitudinal fracture is likely to be initiated at the interface of wellbore and concrete sample with poor cementation quality. The initiation fracture pressure of the different stages increases in turn, with the largest increase of 30%. Pressure quickly declines after initiation with low propagation pressure when the transverse hydraulic fracture is formed. The pressure reduces with fluctuation after the initiation of fracture when the fracture deflects, the extension pressure is high, and the fracture formed is tortuous and narrow. There is a violently fluctuant rise of pressure with multiple peak values when longitudinal fracture created, and it is hard to distinguish the features between the initiation stage and propagation stage.
基金supported by the National Natural Science Foundation of China (No.52104008&No.52274042)the Natural Science Foundation of Sichuan,China (No.2024NSFSC0963)。
文摘The “well factory” mode's high-density well placement and multi-stage hydraulic fracturing technology enable efficient development of unconventional oil and gas resources.However,the deployment of platform wells in the “well factory” model results in small wellbore spacing,and the stress disturbances caused by fracturing operations may affect neighboring wells,leading to inter-well interference phenomena that cause casing deformation.This study investigates the issue of inter-well interference causing casing deformation or even failure during multi-stage hydraulic fracturing in the “well factory”model,and predicts high-risk locations for casing failure.A flow-mechanics coupled geomechanical finite element model with retaining geological stratification characteristics was established.Based on the theory of hydraulic fracturing-induced rock fragmentation and fluid action leading to the degradation of rock mechanical properties,the model simulated the four-dimensional evolution of multi-well fracturing areas over time and space,calculating the disturbance in the regional stress field caused by fracturing operations.Subsequently,the stress distribution of multiple well casings at different time points was calculated to predict high-risk locations for casing failure.The research results show that the redistribution of the stress field in the fracturing area increases the stress on the casing.The overlapping fracturing zones between wells cause significant stress interference,greatly increasing the risk of deformation and failure.By analyzing the Mises stress distribution of multi-well casings,high-risk locations for casing failure can be identified.The conclusion is that the key to preventing casing failure in platform wells in the “well factory” model is to optimize the spatial distribution of fracturing zones between wells and reasonably arrange well spacing.The study provides new insights and methods for predicting casing failure in unconventional oil and gas reservoirs and offers references for optimizing drilling and fracturing designs.
文摘In multi-stage hydraulic fracturing,the limited-entry method is widely used to promote uniform growth of multiple fractures.However,this method's effectiveness may be lost because the perforations will be eroded gradually during the fracturing period.In order to study the influence of perforation erosion on multiple growing hydraulic fractures,we combined the solid-fluid coupled model of hydraulic fracture growth with an empirical model of perforation erosion to implement numerical simulation.The simulations show clearly that the erosion of perforation will significantly deteriorate the non-uniform growth of multiple fractures.Based on the numerical model,we also studied the influences of proppant concentration and injection rates on perforation erosion in multi-stage hydraulic fracturing.The results indicate that the initial erosion rates become higher with the rising proppant concentration,but the growth of multiple hydraulic fractures is not sensitive to the varied proppant concentration.In addition,higher injection rates are beneficial significantly to the limited-entry design,leading to more uniform growth of fractures.Thus,in multi-stage hydraulic fracturing enough high injection rates are proposed to keep uniform growths.
文摘Multi-stage volume fracturing of horizontal wells is the main means to develop tight gas reservoirs.Complex fracture networks of various shapes are generated around the wellbore after volume fracturing.At present,however,most of the well test models suitable for fracturing horizontal wells take all hydraulic fractures as single main fractures,which results in a large error between well test interpretation result and actual situation.As a result,the fracture network characteristic parameters of the stimulated areas cannot be obtained accurately.To this end,a well test model for complex fracture networks in tight-gas fracturing horizontal wells was established on the basis of the non-structural discrete fracture model.Then,this model was solved by using thefinite element method with combined triangular elements and linear elements.And accordingly,the well test type curves of a horizontal well under different fracture network patterns(rectangular,elliptical and hyperbolic)were prepared.Based on this,well test type curves were analyzed from the aspects of characteristics and influential factors and were compared with those obtained from the conventional single-fracture model.Finally,the new model was applied in well test interpretation of one multi-stage volume fracturing horizontal well in the gas reservoir of Permian Shan 1 formation in the Qingyang Gas Field of the Ordos Basin.And the following research results were obtained.First,the biggest difference of well test type curve between the fracture network model and the conventional single-fracture model occurs in the early stage,the characteristics offirst linearflow regime are replaced with the characteristics of pseudo-radialflow regime in the stimulated area.Second,the end time of the pseudo-radialflow regime in the stimulated area is mainly dominated by the size and shape of the stimulated area.The larger the stimulated area is,the longer the pseudo-radialflow regime lasts.As the shape of the stimulated area approaches to be elongated,the characteristics of the well test type curve obtained by the new model are more consistent with those by the single-fracture model.Third,the pressure derivative value of the pseudo-radialflow regime in the stimulated area is mainly dependent on the conductivity and density of the fracture network.The higher the density or the conductivity of fracture network in the stimulated area is,the earlier the wellbore storage effect regime ends,the lower the pressure derivative value of the pseudo-radialflow regime in the stimulated area is and the more obvious the characteristics of the horizontal line are.In conclusion,case study results confirm that the new model is reliable and practical and can provide accurate reservoir parameters as well as the size of the effectively stimulated area by volume fracturing and the conductivity of fracture network,which is conducive to evaluating the stimulation effect of volume fracturing and predicting the postfrac production performance.
基金funded by the project of the Major Scientific and Technological Projects of CNOOC in the 14th Five-Year Plan(No.KJGG2022-0701)the CNOOC Research Institute(No.2020PFS-03).
文摘To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.
基金the Australian Research Council Discovery Project(ARC DP 220100851)scheme and would acknowledge that.
文摘Particle-fluid two-phase flows in rock fractures and fracture networks play a pivotal role in determining the efficiency and effectiveness of hydraulic fracturing operations,a vital component in unconventional oil and gas extraction.Central to this phenomenon is the transport of proppants,tiny solid particles injected into the fractures to prevent them from closing once the injection is stopped.However,effective transport and deposition of proppant is critical in keeping fracture pathways open,especially in lowpermeability reservoirs.This review explores,then quantifies,the important role of fluid inertia and turbulent flows in governing proppant transport.While traditional models predominantly assume and then characterise flow as laminar,this may not accurately capture the complexities inherent in realworld hydraulic fracturing and proppant emplacement.Recent investigations highlight the paramount importance of fluid inertia,especially at the high Reynolds numbers typically associated with fracturing operations.Fluid inertia,often overlooked,introduces crucial forces that influence particle settling velocities,particle-particle interactions,and the eventual deposition of proppants within fractures.With their inherent eddies and transient and chaotic nature,turbulent flows introduce additional complexities to proppant transport,crucially altering proppant settling velocities and dispersion patterns.The following comprehensive survey of experimental,numerical,and analytical studies elucidates controls on the intricate dynamics of proppant transport under fluid inertia and turbulence-towards providing a holistic understanding of the current state-of-the-art,guiding future research directions,and optimising hydraulic fracturing practices.
基金supported by the Natural Science Foundation of China (Grant No. 51490653, Basic Theoretical Research of Shale Oil and Gas Effective Development)
文摘Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. The initiation and propagation of hydraulic fractures will cause stress redistribution and may activate natural fractures in the reservoir. Due to the limitation of the analytical method in calculation of induced stresses, we propose a numerical method, which incorporates the interaction of hydraulic fractures and the wellbore, and analyzes the stress distri- bution in the reservoir under different stage spacing. Simulation results indicate the following： （1） The induced stress was overestimated from the analytical method because it did not take into account the interaction between hydraulic fractures and the horizontal wellbore. （2） The hydraulic fracture had a considerable effect on the redis- tribution of stresses in the direction of the horizontal wellbore in the reservoir. The stress in the direction per- pendicular to the horizontal wellbore after hydraulic frac- turing had a minor change compared with the original in situ stress. （3） Stress interferences among fractures were greatly connected with the stage spacing and the distance from the wellbore. When the fracture length was 200 m, and the stage spacing was 50 m, the stress redistribution due to stage fracturing may divert the original stress pat- tern, which might activate natural fractures so as to generate a complex fracture network.
基金financially supported by,the Fundamental Research Funds for the Central Universities(Grant No.2023QN1064)the China Postdoctoral Science Foundation(Grant No.2023M733772)Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2023ZB847)。
文摘Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.
文摘BACKGROUND In pediatric age group patients(<18 years old)treated operatively for distal radius/both bone fractures extending imaging beyond the initial postoperative period-particularly in uncomplicated cases-appears to provide limited additional benefit.AIM To determine the necessary number of follow-up X-rays to use resources efficiently.METHODS Participants included in this study are pediatric age group patients who were treated operatively for distal radius/both bone fractures and were identified from a prospected collected data from the operating room database between the years 2009 and 2017.The data in the study included patients who had distal radius fractures and underwent fixation surgery(n=88).RESULTS When assessing the difference in the odds of conducting 1 or less X-ray compared to 2 or more X-rays in regard to the type of fixation,the only significant difference is the closed reduction fixation method.Patients who underwent closed reduction method procedure have significantly lower odds of having 2 more X-rays compared to those who didn’t have closed reduction method.Open reduction,internal fixation,and other fixation methods(close reduction and internal fixation,debridement,or epiphysiodesis)have higher odds of having two or more X-rays compared to patients who did not receive these methods;however,these odds are not statistically significant.CONCLUSION The findings of this study reveal notable absence of a statistically significant association between the frequency of postoperative X-rays and the outcome of children with distal radius fractures.
文摘With the increasing demand for energy,traditional oil resources are facing depletion and insufficient supply.Many countries are rapidly turning to the development of unconventional oil and gas resources.Among them,shale oil and gas reservoirs have become the focus of unconventional oil and gas resources exploration and development.Based on the characteristics of shale oil and gas reservoirs,supercritical CO_(2) fracturing is more conducive to improving oil recovery than other fracturing technologies.In this paper,the mechanism of fracture initiation and propagation of supercritical CO_(2) in shale is analyzed,including viscosity effect,surface tension effect,permeation diffusion effect of supercritical CO_(2),and dissolution-adsorption effect between CO_(2) and shale.The effects of natural factors,such as shale properties,bedding plane and natural fractures,and controllable factors,proppant,temperature,pressure,CO_(2) concentration and injection rate on fracture initiation and propagation are clarified.The methods of supercritical CO_(2) fracturing process,thickener and proppant optimization to improve the efficiency of supercritical CO_(2) fracturing are discussed.In addition,some new technologies of supercritical CO_(2) fracturing are introduced.The challenges and prospects in the current research are also summarized.For example,supercritical CO_(2) is prone to filtration when passing through porous media,and it is difficult to form a stable flow state.Therefore,in order to achieve stable fracturing fluid suspension and effectively support fractu res,it is urge nt to explo re new fracturing fluid additives or improve fracturing fluid formulations combined with the research of new proppants.This paper is of great significance for understanding the behavior mechanism of supercritical CO_(2) in shale and optimizing fracturing technology.
