With increasing water depth,marine drilling conductors exhibit higher slenderness ratios,significantly reducing their resistance to environmental loads in Arctic waters.These conductors,when subjected to combined wind...With increasing water depth,marine drilling conductors exhibit higher slenderness ratios,significantly reducing their resistance to environmental loads in Arctic waters.These conductors,when subjected to combined wind,current,and ice loads,may experience substantial horizontal displacements and bending moments,potentially compromising off-shore operational safety and wellhead stability.Additionally,soil disturbance near the mudline diminishes the conductor’s bearing capacity,potentially rendering it inadequate for wellhead support and increasing operational risks.This study introduces a static analysis model based on plastic hinge theory to evaluate conductor survivability.The conductor analysis divides the structure into three segments:above waterline,submerged,and embedded below mudline.An idealized elastic-plastic p-y curve model characterizes soil behavior beneath the mudline,while the finite difference method(FDM)analyzes the conductor’s mechanical response under complex pile-head boundary conditions.Numerical simulations using ABAQUS validate the plastic hinge approach against conventional methods,confirming its accuracy in predicting structural performance.These results provide valuable insights for optimizing installation depths and bearing capacity designs of marine drilling conductors in ice-prone regions.展开更多
For large-scale energy storage devices,all-solid-state sodium-ion batteries(SIBs)have been revered for the abundant resources,low cost,safety performance and a wide operating temperature range.Na-ion solid-state elect...For large-scale energy storage devices,all-solid-state sodium-ion batteries(SIBs)have been revered for the abundant resources,low cost,safety performance and a wide operating temperature range.Na-ion solid-state electrolytes(Na-ion SSEs)are the critical parts and mostly determine the electrochemical performance of SIBs.Among the studied ones,inorganic Na-ion SSEs stand out for their good safety performance and high ionic conductivity.In this review,we outline the research progress of inorganic SSEs in SIBs based on the perspectives of crystal structure,performance optimization,synthesis methods,allsolid-state SIBs,interface modification and related characterization techniques.We hope to provide some ideas for the design of future high-performance Na-ion SSEs.展开更多
Single ion gel polymer electrolyte has the advantages of high Li^(+)conductivity and dendrite mitigation.However,the addition of organic solvent makes the electrolyte flammable,posing serious safety hazards.Herein,we ...Single ion gel polymer electrolyte has the advantages of high Li^(+)conductivity and dendrite mitigation.However,the addition of organic solvent makes the electrolyte flammable,posing serious safety hazards.Herein,we report a flame-retard ant cross-linked sp^(3)boron-based single-ion gel polymer electrolyte(BSIPE).BSIPE was prepared by a simple one-step photoinitiated in situ thiol-ene click reaction.Due to the boron-based anions being immobilized in the cross-linking network,the developed BSIPE/PFN exhibits a high t_(Li^(+))(0.87),which can mitigate concentration polarization phenomenon and suppress the growth of lithium dendrites.BSIPE/PFN plasticized with triethyl phosphate(TEP),fluoroethylene carbonate(FEC)and LiNO_(3)exhibits enhanced ionic conductivity of 4.25×10^(-4)S cm^(-1)at 30℃ and flame retardancy.FEC and LiNO_(3) are conducive to form a stable solid electrolyte interphase(SEI)rich in Li_(3)N and LiF to improve interface stability.As expected,the dendrite-free Li‖BSIPE/PFN‖Li symmetric cell exhibits considerable cycling life over 1500 h.BSIPE/PFN significantly boosts the performance of LFP‖Li cell,which displays a capacity retention of 84.6%after 500 cycles.The BSIPE/PFN has promising applications in highsafety and high-performance lithium metal batteries.展开更多
Copper is widely used as conductive components in transmission lines,facing severe corrosion risks.The current passing through copper conductors will significantly affect its corrosion process,yet there is a lack of d...Copper is widely used as conductive components in transmission lines,facing severe corrosion risks.The current passing through copper conductors will significantly affect its corrosion process,yet there is a lack of detailed study on the corrosion mechanism under this specific condition.Thus,this study inves-tigated the effect of direct current current-carrying(DC C-C)conditions on the atmospheric corrosion behavior of copper conductors under thin electrolyte layer(TEL)through electrochemical measurements and corrosion exposure experiments.Results revealed that the presence of DC C-C significantly hastened the corrosion process of copper conductors in the TEL,leading to distinct corrosion patterns at the input and output ends.Furthermore,both the extent of corrosion acceleration and the unevenness of corrosion were positively correlation with the DC C-C level.The above phenomenon was attributed to the special motion of charged particles and paramagnetic substances in TEL under the self-generated magnetic field.展开更多
Despite great advancements in organic mixed ionic-electronic conductors(OMIECs),their applications remain predominantly restricted to three-electrode organic electro-chemical transistors(OECTs),which rely on an additi...Despite great advancements in organic mixed ionic-electronic conductors(OMIECs),their applications remain predominantly restricted to three-electrode organic electro-chemical transistors(OECTs),which rely on an additional electrolyte layer to balance ionic and electronic transport,resulting in indirect coupling of charge carriers.While direct coupling has the potential to greatly simplify device architectures,it remains underexplored in OMIECs due to the inherent imbalance between electronic and ionic conductivities.In this study,we introduce a straightforward approach to achieve balanced OMIECs and employ them as channel materials in two-electrode organic electrochemical memristors.These devices provide clear evidence of direct coupling between electronic and ionic carriers and exhibit exceptional performance in synaptic device applications.Our findings offer new insights into charge carrier transport mechanisms in OMIECs and establish organic electrochemical memristors as a promising new class of organic electronic devices for next-generation neuromorphic applications.展开更多
Black phosphorus(BP)is recognized as a promising anode for sodium-ion batteries(SIBs)due to its high safety and theoretical capacity.However,traditional ball milling methodologies for fabricating BP composite anodes h...Black phosphorus(BP)is recognized as a promising anode for sodium-ion batteries(SIBs)due to its high safety and theoretical capacity.However,traditional ball milling methodologies for fabricating BP composite anodes have not satisfactorily addressed the challenges of poor rate performance and short cycle life.To fill this scientific gap,we herein pioneer incorporating the sodium fast ionic conductorβ"-Al_(2)O_(3)into ball-milled BP with carbon,which facilitates the formation of three-dimensional mass transfer channels in the resulting composite.To stabilize these channels,we develop a novel and environmentally friendly functional binder that outperforms traditional binders in thermal stability,wettability,and mechanical properties.The newly established binder is capable of remarkably mitigating volume expansion and interfacial side reactions in the BP/β"-Al_(2)O_(3)/C composite anode.Additionally,we identify synergistic effects of the binder interacting with the BP/β"-Al_(2)O_(3)/C composite during cycling,characterized by the in-situ formation of P-O-C bonds,which is the first instance of a strong,durable chemical bond between the binder and the active material to the best of our knowledge.These advancements allow the composite electrode to exhibit exceptional sodium storage,including high initial Coulombic efficiency and long-term cycling stability,which surpasses most previous phosphorus-based anodes fabricated via traditional approaches.Notably,when paired with a Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_7(NFPP)cathode,the full cell exhibits unexpectedly high energy and power densities,highlighting the BP potential in SIBs.The findings presented in the present work contribute to the promotion of economical and efficient applications of phosphorus-based anode materials.展开更多
Increasing the charging cut-off voltage can significantly enhance the energy density of LiCoO_(2).However,the continuous deterioration of interface structure and transport kinetics under high voltage poses challenges ...Increasing the charging cut-off voltage can significantly enhance the energy density of LiCoO_(2).However,the continuous deterioration of interface structure and transport kinetics under high voltage poses challenges to electrochemical stability.This work proposes to in-situ construct a uniform element gradient modification structure on the surface and subsurface of LiCoO_(2).The modification structure contains an Sb_(2)O_(3)&SbF_(x)composite coating layer and an Sb-F doped spinel-like transition layer,simultaneously.The modified sample maintains an initial discharge specific capacity of 221.2 mA h g^(-1)and a capacity retention of 86%after 200 cycles at 3–4.6 V and 0.5 C.Moreover,it has a discharge specific capacity of163.3 mA h g^(-1)at a high rate of 5 C.Meanwhile,combining highly electronegative Sb^(3+)&F^(-)that widen the Li^(+)transport channel with the amorphous coating of F^(-)doped Sb_(2)O_(3)with higher conductivity improves the interface transport kinetics.This breaks the stereotypical view in traditional concepts that fluorinated coatings or inert metal oxide coatings inhibit Li^(+)transport.Moreover,the inert composite coating combined with Sb–O–F with high bond energy stabilizes the surface structure.A series of characterizations confirm that the joint improvement of interface structure stability and transport kinetics significantly enhances the electrochemical performance of LiCoO_(2).展开更多
Lithium halide solid-state electrolytes,with the general formula of Li_(3±m)M_(n)X_(6),are regarded as the promising families of electrolyte material for all solid-state lithium-ion batteries because of the relat...Lithium halide solid-state electrolytes,with the general formula of Li_(3±m)M_(n)X_(6),are regarded as the promising families of electrolyte material for all solid-state lithium-ion batteries because of the relatively good ionic conductivity,high oxidative stability against high-voltage oxide cathodes,and broad electrochemical stability window[1].Here,M stands for one or multiple metal elements and X for one or multiple halogen elements.展开更多
The mechanical,thermodynamic properties and electrical conductivities of L1_(2)-Al_(3)X(X=Zr,Sc,Er,Yb,Hf)structural phases in aluminum conductors were investigated through a first-principles study.The results demonstr...The mechanical,thermodynamic properties and electrical conductivities of L1_(2)-Al_(3)X(X=Zr,Sc,Er,Yb,Hf)structural phases in aluminum conductors were investigated through a first-principles study.The results demonstrate that all structural phases have good alloy-forming ability and structural stability,where Al_(3)Zr is the most superior.Al_(3)Zr,Al_(3)Hf and Al_(3)Sc have enhanced shear and deformation resistance in comparison to other phases.Within the temperature range of 200−600 K,Al_(3)Er and Al_(3)Yb possess the greatest thermodynamic stability,followed by Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.Al_(3)Er and Al_(3)Yb have higher thermodynamic stability than Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.All structural phases exhibit substantial metallic properties,indicating their good electrical conductivity.The electrical conductivities of Al_(3)Hf and Al_(3)Zr are higher than those of Al_(3)Er,Al_(3)Yb and Al_(3)Sc.The covalent bond properties in Al_(3)Sc,Al_(3)Er and Al_(3)Yb enhance the hardness,brittleness and thermodynamic stability of the structural phase.The thermodynamic stability of Al_(3)Sc is significantly reduced by ionic bonds.展开更多
This paper introduces the key laboratory on bundle conductors for high voltage overhead lines built byElectric Power Construction Research Institute under the State Power Corporation of China. It consists of 4 sub-lab...This paper introduces the key laboratory on bundle conductors for high voltage overhead lines built byElectric Power Construction Research Institute under the State Power Corporation of China. It consists of 4 sub-laboratories, namely the Aeolian Vibration Lab, Spacer Vibration Lab, Conductor Fatigue Lab and Conductor CreepageLab. The paper introduces also laboratory’s facilities, functions and some experimental results.[展开更多
In this paper the heat withstanding mechanism of heat-resisting aluminum alloy conductor is discussed, the types and performance of the conductor and its application on transmission lines are analyzed and introduced, ...In this paper the heat withstanding mechanism of heat-resisting aluminum alloy conductor is discussed, the types and performance of the conductor and its application on transmission lines are analyzed and introduced, and suggestions on accelerating exploitation and application of the conductor are put forward.展开更多
Organic conductor is a kind of organic compound which has special electronic and magnetic properties. The research of the organic compounds has received considerable attention because of their potential applications i...Organic conductor is a kind of organic compound which has special electronic and magnetic properties. The research of the organic compounds has received considerable attention because of their potential applications in many areas. The molecular conductive units are theoretically investigated as well as their energy gap and charge distribution. The relationship of conductivity and micro mechanism is discussed.展开更多
(NH4)3PW12O40 and(NH4)3PW12O40-H3PO4 composites have been synthesized by precipitation method.Their phase compositions,thermal stability and morphologies have been investigated.The synthesized composites maintain the ...(NH4)3PW12O40 and(NH4)3PW12O40-H3PO4 composites have been synthesized by precipitation method.Their phase compositions,thermal stability and morphologies have been investigated.The synthesized composites maintain the same structures as pure(NH4)3PW12O40 where phosphoric acid is preserved in residual space of the"spongy crystals"of(NH4)3PW12O40.FT-IR spectra confirm the strong interactions between phosphoric acid and Keggin ions.Pristine(NH4)3PW12O40 shows poor conductivity in air at high temperatures and strongly depends on water molecules for proton transport.The composites exhibit a much higher conductivity compared with pure(NH4)3PW12O40.The highest conductivity achieved is 0.14 S/cm at 170℃where continuous channels based on phosphoric acid for proton transportation are probably established.Such high conductivity of(NH4)3PW12O40-H3PO4 composites implies promising applications in fuel cells and other electrochemical devices.展开更多
La9.335i6O26 oxygen ionic conductor was synthesized by solid state reaction method. Its structure was deter- mined by single-crystal X-ray diffraction analysis at room temperature. The results showed that La9.33Si6O26...La9.335i6O26 oxygen ionic conductor was synthesized by solid state reaction method. Its structure was deter- mined by single-crystal X-ray diffraction analysis at room temperature. The results showed that La9.33Si6O26 oxide has the apatite structure with space group P63/m. AC impedance measurements indicated that the oxides sintered in nitrogen have much higher conductivity than those sintered in air. The effects of grain boundaries on the conductivity were discussed.展开更多
A solid state reaction method was used to prepare the perovskite-structured compounds BaZrl-xYxO3-a （x=0, 0.05, 0.1, 0.15, 0.2, 0.25, 0.3）. The X-ray diffraction （XRD） pattern indicated that the target perovsldte ...A solid state reaction method was used to prepare the perovskite-structured compounds BaZrl-xYxO3-a （x=0, 0.05, 0.1, 0.15, 0.2, 0.25, 0.3）. The X-ray diffraction （XRD） pattern indicated that the target perovsldte phases were obtained. With increasing Y con- centration the unit cell parameters of BaZrl-xYxO3-a samples were expanded, and Y doping became more difficult. However, high synthesis temperature is helpful to promote Y doping. The SEM results showed that the samples exhibited poor sinterability with in- creasing Y-doping content. Thermal gravimetric （TG） curves analysis showed the more mass decreasing of BaZrl-xYxO3-a （0≤x≤0.3） samples at high temperature with more Y doping and more proton introducing. The electrochemical impedance spectra （EIS） of specimens showed that conductivities of BaZrl_xYxO3（0≤x≤0.3） increased with increasing temperature from 300 to 900 ℃ in wet air. At 900 ℃, the conductivity of BaZrl-xYxO3-a （0≤x≤0.3） first increased with increasing doped amount of Y, and reached the high- est value of 1.07x 104 S/cm when x was 0.2, then decreased gradually with further increasing Y content. At 600 ℃, BaZr0.75Y0.2503-a displayed the highest conductivity, while the conductivity of BaZro.rYo.303-a was the highest at 300 ℃. The results indicated that there should be an optimum Y doping concentration yielding the highest conductivity at a constant temperature, and the optimum Y doping concentration should increase in the humidity atmosphere as the temperature decreases. So increasing the Y-doping concen- tration is helpful to improve the conductivities of BaZrl-xYxO3-a materials at low temperature.展开更多
The steel contains a small amount of hydrogen which will escape during the heat treatment.The hydrogen pressure in 16MnRE steel was investigated with a hydrogen sensor,which used SrCe0.95Yb0.05O3-α proton conductor a...The steel contains a small amount of hydrogen which will escape during the heat treatment.The hydrogen pressure in 16MnRE steel was investigated with a hydrogen sensor,which used SrCe0.95Yb0.05O3-α proton conductor as a solid electrolyte,YHx＋YH2z as a solid state reference electrode and Ni wire as electrode constructing a hydrogen concentration cell,shown as Ni｜YHx＋YH2z ｜SrCe0.95Yb0.05O3-α ｜[H] steel ｜Ni.The response time of sensor is less than 10s.The relational expression of hydrogen partial pressure with temperatures was determined using two shape proton conductors.The results showed the regularity in experimental temperature range,and the hydrogen partial pressure increased as its temperature was raised.展开更多
YBCO high temperature coated conductors are the most promising candidate for large scale superconducting transmission cables and fault current limiters. A modified TFA-MOD method was applied to prepare YBCO layer on R...YBCO high temperature coated conductors are the most promising candidate for large scale superconducting transmission cables and fault current limiters. A modified TFA-MOD method was applied to prepare YBCO layer on Rolling Assisted Biaxially Textured Substrate (RABiTS) with textured Y 2 O 3 /YSZ/CeO 2 buffer layers, resulting in reduced time and cost of fabrication. By using Cu naphthenate instead of Cu(TFA) 2 , the pyrolysis time of the YBCO precursors was reduced significantly. YBCO films with thickness of 2 μm were fabricated with multiple-coating and annealed at high temperature for 2 h. X-ray diffraction analysis revealed that the films were c-axis oriented. The preliminary results of YBCO films yielded 0.2 MA/cm 2 at 77 K and self field. It is believed current carrying ability of YBCO films could be further improved by reducing the reaction rate at the interface between the buffer layer and superconducting layer.展开更多
In this paper, 1,2,4-triazolium methanesulfonate （C_2H_4N_3^＋-CH_3SO_3^-, [Tri][MS]）, an ionic conductor, was successfully synthesized. It exhibited high ionic conductivity of 18.60 mS·cm^-1 at 140 ℃ and reac...In this paper, 1,2,4-triazolium methanesulfonate （C_2H_4N_3^＋-CH_3SO_3^-, [Tri][MS]）, an ionic conductor, was successfully synthesized. It exhibited high ionic conductivity of 18.60 mS·cm^-1 at 140 ℃ and reached up to 36.51 mS·cm^-1 at 190 ℃. [Tri][MS] was first applied to modify Nation membrane to fabricate [Tri][MS]/Nafion membrane by impregnation method at 150 ℃. The prepared composite membrane showed high thermal stability with decomposed temperature above 200 ℃ in air atmosphere. In addition, the membrane indicated good ionic conductivity with 3.67 mS·cm^-1 at 140 ℃ and reached up to 13.23 mS·cm^-1 at 180 ℃. The structure of the [Tri][MS] and the composite membrane were characterized by FTIR and the compatibility of [Tri][MS] and Pt/C catalyst was studied by a cyclic voltammetry （CV） method. Besides, the [Tri][MS]/Nafion membrane （thickness of 65 μm） was evaluated with single fuel cell at high temperature and without humidification. The highest power density of [Tri][MS]/Nafion membrane was 3.20 mW·cm^-2 at 140 ℃ and 4.90 mW·cm^-2 at 150 ℃, which was much higher than that of Nation membrane.展开更多
Cable-in-conduit conductor （CICC） conductor sample of the PF2 coil for ITER was tested in the SULTAN facility. According to the test results, the CICC conductor sample exhibited a stable performance regarding the cu...Cable-in-conduit conductor （CICC） conductor sample of the PF2 coil for ITER was tested in the SULTAN facility. According to the test results, the CICC conductor sample exhibited a stable performance regarding the current sharing temperature. Under the typical operational conditions of a current of 45 kA, a magnetic field of 4 T and a temperature of 5 K for PF2, the test result for the conductor current sharing temperature is 6.71 K, with a temperature margin of 1.71 K. For a comparison thermal-hydraulic analysis of the PF2 conductor was carried out using GANDALF code in a 1-D model, and the result is consistent with the test one.展开更多
The central solenoid（CS）is one of the key components of the International Thermonuclear Experimental Reactor（ITER）tokamak and which is often considered as the heart of this fusion reactor.This solenoid will be bui...The central solenoid（CS）is one of the key components of the International Thermonuclear Experimental Reactor（ITER）tokamak and which is often considered as the heart of this fusion reactor.This solenoid will be built by using Nb3Sn cablein-conduit conductors（CICC）,capable of generating a 13 T magnetic field.In order to assess the performance of the Nb3Sn CICC in nearly the ITER condition,many short samples have been evaluated at the SULTAN test facility（the background magnetic field is of 10.85 T with the uniform length of 400 mm at 1%homogeneity）in Centre de Recherches en Physique des Plasma（CRPP）.It is found that the samples with pseudo-long twist pitch（including baseline specimens）show a significant degradation in the current-sharing temperature（Tcs）,while the qualification tests of all short twist pitch（STP）samples,which show no degradation versus electromagnetic cycling,even exhibits an increase of Tcs.This behavior was perfectly reproduced in the coil experiments at the central solenoid model coil（CSMC）facility last year.In this paper,the complex structure of the Nb3Sn CICC would be simplified into a wire rope consisting of six petals and a cooling spiral.An analytical formula for the Tcs behavior as a function of the axial strain of the cable is presented.Based on this,the effects of twist pitch,axial and transverse stiffness,thermal mismatch,cycling number,magnetic distribution,etc.,on the axial strain are discussed systematically.The calculated Tcs behavior with cycle number show consistency with the previous experimental results qualitatively and quantitatively.Lastly,we focus on the relationship between Tcs and axial strain of the cable,and we conclude that the Tcs behavior caused by electromagnetic cycles is determined by the cable axial strain.Once the cable is in a compression situation,this compression strain and its accumulation would lead to the Tcs degradation.The experimental observation of the Tcs enhancement in the CS STP samples should be considered as a contribution of the shorter length of the high field zone in SULTAN and CSMC devices,as well as the tight cable structure.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.U22B20126)the National Key Research and Development Program of China(Grant No.2022YFC2806100).
文摘With increasing water depth,marine drilling conductors exhibit higher slenderness ratios,significantly reducing their resistance to environmental loads in Arctic waters.These conductors,when subjected to combined wind,current,and ice loads,may experience substantial horizontal displacements and bending moments,potentially compromising off-shore operational safety and wellhead stability.Additionally,soil disturbance near the mudline diminishes the conductor’s bearing capacity,potentially rendering it inadequate for wellhead support and increasing operational risks.This study introduces a static analysis model based on plastic hinge theory to evaluate conductor survivability.The conductor analysis divides the structure into three segments:above waterline,submerged,and embedded below mudline.An idealized elastic-plastic p-y curve model characterizes soil behavior beneath the mudline,while the finite difference method(FDM)analyzes the conductor’s mechanical response under complex pile-head boundary conditions.Numerical simulations using ABAQUS validate the plastic hinge approach against conventional methods,confirming its accuracy in predicting structural performance.These results provide valuable insights for optimizing installation depths and bearing capacity designs of marine drilling conductors in ice-prone regions.
基金supported by the National Natural Science Foundation of China(Nos.22175070,22293041)supported by the National Key Research and Development Program(Nos.2021YFB2500200,2021YFB2400300)+1 种基金the National Natural Science Foundation of China(No.52177214)China Fujian Energy Devices Science and Technology Innovation Laboratory Open Fund(No.21C-OP202211)。
文摘For large-scale energy storage devices,all-solid-state sodium-ion batteries(SIBs)have been revered for the abundant resources,low cost,safety performance and a wide operating temperature range.Na-ion solid-state electrolytes(Na-ion SSEs)are the critical parts and mostly determine the electrochemical performance of SIBs.Among the studied ones,inorganic Na-ion SSEs stand out for their good safety performance and high ionic conductivity.In this review,we outline the research progress of inorganic SSEs in SIBs based on the perspectives of crystal structure,performance optimization,synthesis methods,allsolid-state SIBs,interface modification and related characterization techniques.We hope to provide some ideas for the design of future high-performance Na-ion SSEs.
基金supported by the National Natural Science Foundation of China(22179149,22075329,51573215,and 21978332)Research and Development Project of Henan Academy Sciences China(232018002)。
文摘Single ion gel polymer electrolyte has the advantages of high Li^(+)conductivity and dendrite mitigation.However,the addition of organic solvent makes the electrolyte flammable,posing serious safety hazards.Herein,we report a flame-retard ant cross-linked sp^(3)boron-based single-ion gel polymer electrolyte(BSIPE).BSIPE was prepared by a simple one-step photoinitiated in situ thiol-ene click reaction.Due to the boron-based anions being immobilized in the cross-linking network,the developed BSIPE/PFN exhibits a high t_(Li^(+))(0.87),which can mitigate concentration polarization phenomenon and suppress the growth of lithium dendrites.BSIPE/PFN plasticized with triethyl phosphate(TEP),fluoroethylene carbonate(FEC)and LiNO_(3)exhibits enhanced ionic conductivity of 4.25×10^(-4)S cm^(-1)at 30℃ and flame retardancy.FEC and LiNO_(3) are conducive to form a stable solid electrolyte interphase(SEI)rich in Li_(3)N and LiF to improve interface stability.As expected,the dendrite-free Li‖BSIPE/PFN‖Li symmetric cell exhibits considerable cycling life over 1500 h.BSIPE/PFN significantly boosts the performance of LFP‖Li cell,which displays a capacity retention of 84.6%after 500 cycles.The BSIPE/PFN has promising applications in highsafety and high-performance lithium metal batteries.
基金supported by the National Natu-ral Science Foundation of China(Nos.52171074 and 52471084)the Young Elite Scientists Sponsorship Program by CAST(No.YESS20220137)the Science and Technology Commission of Shanghai Municipality(No.19DZ2271100).
文摘Copper is widely used as conductive components in transmission lines,facing severe corrosion risks.The current passing through copper conductors will significantly affect its corrosion process,yet there is a lack of detailed study on the corrosion mechanism under this specific condition.Thus,this study inves-tigated the effect of direct current current-carrying(DC C-C)conditions on the atmospheric corrosion behavior of copper conductors under thin electrolyte layer(TEL)through electrochemical measurements and corrosion exposure experiments.Results revealed that the presence of DC C-C significantly hastened the corrosion process of copper conductors in the TEL,leading to distinct corrosion patterns at the input and output ends.Furthermore,both the extent of corrosion acceleration and the unevenness of corrosion were positively correlation with the DC C-C level.The above phenomenon was attributed to the special motion of charged particles and paramagnetic substances in TEL under the self-generated magnetic field.
基金supported by the National Natural Science Foundation of China(4020969,62405044,and 52173156)Fund by Science Research Project of Hebei Education Department(HY2024050011)+1 种基金Natural Science Foundation of Sichuan Province(25NSFSC1287)Foundation of Yanshan University(1050030 and 8190299).
文摘Despite great advancements in organic mixed ionic-electronic conductors(OMIECs),their applications remain predominantly restricted to three-electrode organic electro-chemical transistors(OECTs),which rely on an additional electrolyte layer to balance ionic and electronic transport,resulting in indirect coupling of charge carriers.While direct coupling has the potential to greatly simplify device architectures,it remains underexplored in OMIECs due to the inherent imbalance between electronic and ionic conductivities.In this study,we introduce a straightforward approach to achieve balanced OMIECs and employ them as channel materials in two-electrode organic electrochemical memristors.These devices provide clear evidence of direct coupling between electronic and ionic carriers and exhibit exceptional performance in synaptic device applications.Our findings offer new insights into charge carrier transport mechanisms in OMIECs and establish organic electrochemical memristors as a promising new class of organic electronic devices for next-generation neuromorphic applications.
基金supported by the National Key R&D Program of China(2022YFB3807700)the National Natural Science Foundation of China(52072217,22179071,51772169,and 52104313)+3 种基金the Hubei Provincial Natural Science Foundation of China(2023AFB618 and 2024AFB993)the Hubei Natural Science Foundation Innovation Group Project(2022CFA020)the Joint Funds of the Hubei Natural Science Foundation Innovation and Development(2022CFD034)the Major Technological Innovation Project of Hubei Science and Technology Department(2019AAA164)。
文摘Black phosphorus(BP)is recognized as a promising anode for sodium-ion batteries(SIBs)due to its high safety and theoretical capacity.However,traditional ball milling methodologies for fabricating BP composite anodes have not satisfactorily addressed the challenges of poor rate performance and short cycle life.To fill this scientific gap,we herein pioneer incorporating the sodium fast ionic conductorβ"-Al_(2)O_(3)into ball-milled BP with carbon,which facilitates the formation of three-dimensional mass transfer channels in the resulting composite.To stabilize these channels,we develop a novel and environmentally friendly functional binder that outperforms traditional binders in thermal stability,wettability,and mechanical properties.The newly established binder is capable of remarkably mitigating volume expansion and interfacial side reactions in the BP/β"-Al_(2)O_(3)/C composite anode.Additionally,we identify synergistic effects of the binder interacting with the BP/β"-Al_(2)O_(3)/C composite during cycling,characterized by the in-situ formation of P-O-C bonds,which is the first instance of a strong,durable chemical bond between the binder and the active material to the best of our knowledge.These advancements allow the composite electrode to exhibit exceptional sodium storage,including high initial Coulombic efficiency and long-term cycling stability,which surpasses most previous phosphorus-based anodes fabricated via traditional approaches.Notably,when paired with a Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_7(NFPP)cathode,the full cell exhibits unexpectedly high energy and power densities,highlighting the BP potential in SIBs.The findings presented in the present work contribute to the promotion of economical and efficient applications of phosphorus-based anode materials.
基金supported by the National Natural Science Foundation of China(22075170)employed resources from the BL11B station of the Shanghai Synchrotron Radiation Facility(SSRF,under contract number:2023-SSRF-PT-502681)。
文摘Increasing the charging cut-off voltage can significantly enhance the energy density of LiCoO_(2).However,the continuous deterioration of interface structure and transport kinetics under high voltage poses challenges to electrochemical stability.This work proposes to in-situ construct a uniform element gradient modification structure on the surface and subsurface of LiCoO_(2).The modification structure contains an Sb_(2)O_(3)&SbF_(x)composite coating layer and an Sb-F doped spinel-like transition layer,simultaneously.The modified sample maintains an initial discharge specific capacity of 221.2 mA h g^(-1)and a capacity retention of 86%after 200 cycles at 3–4.6 V and 0.5 C.Moreover,it has a discharge specific capacity of163.3 mA h g^(-1)at a high rate of 5 C.Meanwhile,combining highly electronegative Sb^(3+)&F^(-)that widen the Li^(+)transport channel with the amorphous coating of F^(-)doped Sb_(2)O_(3)with higher conductivity improves the interface transport kinetics.This breaks the stereotypical view in traditional concepts that fluorinated coatings or inert metal oxide coatings inhibit Li^(+)transport.Moreover,the inert composite coating combined with Sb–O–F with high bond energy stabilizes the surface structure.A series of characterizations confirm that the joint improvement of interface structure stability and transport kinetics significantly enhances the electrochemical performance of LiCoO_(2).
文摘Lithium halide solid-state electrolytes,with the general formula of Li_(3±m)M_(n)X_(6),are regarded as the promising families of electrolyte material for all solid-state lithium-ion batteries because of the relatively good ionic conductivity,high oxidative stability against high-voltage oxide cathodes,and broad electrochemical stability window[1].Here,M stands for one or multiple metal elements and X for one or multiple halogen elements.
基金National Natural Science Foundation of China (No. 52274403)。
文摘The mechanical,thermodynamic properties and electrical conductivities of L1_(2)-Al_(3)X(X=Zr,Sc,Er,Yb,Hf)structural phases in aluminum conductors were investigated through a first-principles study.The results demonstrate that all structural phases have good alloy-forming ability and structural stability,where Al_(3)Zr is the most superior.Al_(3)Zr,Al_(3)Hf and Al_(3)Sc have enhanced shear and deformation resistance in comparison to other phases.Within the temperature range of 200−600 K,Al_(3)Er and Al_(3)Yb possess the greatest thermodynamic stability,followed by Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.Al_(3)Er and Al_(3)Yb have higher thermodynamic stability than Al_(3)Hf,Al_(3)Zr and Al_(3)Sc.All structural phases exhibit substantial metallic properties,indicating their good electrical conductivity.The electrical conductivities of Al_(3)Hf and Al_(3)Zr are higher than those of Al_(3)Er,Al_(3)Yb and Al_(3)Sc.The covalent bond properties in Al_(3)Sc,Al_(3)Er and Al_(3)Yb enhance the hardness,brittleness and thermodynamic stability of the structural phase.The thermodynamic stability of Al_(3)Sc is significantly reduced by ionic bonds.
文摘This paper introduces the key laboratory on bundle conductors for high voltage overhead lines built byElectric Power Construction Research Institute under the State Power Corporation of China. It consists of 4 sub-laboratories, namely the Aeolian Vibration Lab, Spacer Vibration Lab, Conductor Fatigue Lab and Conductor CreepageLab. The paper introduces also laboratory’s facilities, functions and some experimental results.[
文摘In this paper the heat withstanding mechanism of heat-resisting aluminum alloy conductor is discussed, the types and performance of the conductor and its application on transmission lines are analyzed and introduced, and suggestions on accelerating exploitation and application of the conductor are put forward.
文摘Organic conductor is a kind of organic compound which has special electronic and magnetic properties. The research of the organic compounds has received considerable attention because of their potential applications in many areas. The molecular conductive units are theoretically investigated as well as their energy gap and charge distribution. The relationship of conductivity and micro mechanism is discussed.
基金supported financially by the National Natural Science Foundation of China(No.21401142,51972233)the Natural Science Foundation of Shanghai(No.19ZR1459200)+3 种基金the National 1000-Plan Programthe Shanghai Science and Technology Commission(No.14DZ2261100)the South Taihu Elite Projectthe Fundamental Research Funds for the Central Universities.
文摘(NH4)3PW12O40 and(NH4)3PW12O40-H3PO4 composites have been synthesized by precipitation method.Their phase compositions,thermal stability and morphologies have been investigated.The synthesized composites maintain the same structures as pure(NH4)3PW12O40 where phosphoric acid is preserved in residual space of the"spongy crystals"of(NH4)3PW12O40.FT-IR spectra confirm the strong interactions between phosphoric acid and Keggin ions.Pristine(NH4)3PW12O40 shows poor conductivity in air at high temperatures and strongly depends on water molecules for proton transport.The composites exhibit a much higher conductivity compared with pure(NH4)3PW12O40.The highest conductivity achieved is 0.14 S/cm at 170℃where continuous channels based on phosphoric acid for proton transportation are probably established.Such high conductivity of(NH4)3PW12O40-H3PO4 composites implies promising applications in fuel cells and other electrochemical devices.
文摘La9.335i6O26 oxygen ionic conductor was synthesized by solid state reaction method. Its structure was deter- mined by single-crystal X-ray diffraction analysis at room temperature. The results showed that La9.33Si6O26 oxide has the apatite structure with space group P63/m. AC impedance measurements indicated that the oxides sintered in nitrogen have much higher conductivity than those sintered in air. The effects of grain boundaries on the conductivity were discussed.
基金Project supported by National Natural Science Foundation of China （51074038, 51274057） and National High Technology Research and Development Program of China （2013AA030902）
文摘A solid state reaction method was used to prepare the perovskite-structured compounds BaZrl-xYxO3-a （x=0, 0.05, 0.1, 0.15, 0.2, 0.25, 0.3）. The X-ray diffraction （XRD） pattern indicated that the target perovsldte phases were obtained. With increasing Y con- centration the unit cell parameters of BaZrl-xYxO3-a samples were expanded, and Y doping became more difficult. However, high synthesis temperature is helpful to promote Y doping. The SEM results showed that the samples exhibited poor sinterability with in- creasing Y-doping content. Thermal gravimetric （TG） curves analysis showed the more mass decreasing of BaZrl-xYxO3-a （0≤x≤0.3） samples at high temperature with more Y doping and more proton introducing. The electrochemical impedance spectra （EIS） of specimens showed that conductivities of BaZrl_xYxO3（0≤x≤0.3） increased with increasing temperature from 300 to 900 ℃ in wet air. At 900 ℃, the conductivity of BaZrl-xYxO3-a （0≤x≤0.3） first increased with increasing doped amount of Y, and reached the high- est value of 1.07x 104 S/cm when x was 0.2, then decreased gradually with further increasing Y content. At 600 ℃, BaZr0.75Y0.2503-a displayed the highest conductivity, while the conductivity of BaZro.rYo.303-a was the highest at 300 ℃. The results indicated that there should be an optimum Y doping concentration yielding the highest conductivity at a constant temperature, and the optimum Y doping concentration should increase in the humidity atmosphere as the temperature decreases. So increasing the Y-doping concen- tration is helpful to improve the conductivities of BaZrl-xYxO3-a materials at low temperature.
基金supported by the National Natural Science Foundation of China under Grant No.50774018
文摘The steel contains a small amount of hydrogen which will escape during the heat treatment.The hydrogen pressure in 16MnRE steel was investigated with a hydrogen sensor,which used SrCe0.95Yb0.05O3-α proton conductor as a solid electrolyte,YHx＋YH2z as a solid state reference electrode and Ni wire as electrode constructing a hydrogen concentration cell,shown as Ni｜YHx＋YH2z ｜SrCe0.95Yb0.05O3-α ｜[H] steel ｜Ni.The response time of sensor is less than 10s.The relational expression of hydrogen partial pressure with temperatures was determined using two shape proton conductors.The results showed the regularity in experimental temperature range,and the hydrogen partial pressure increased as its temperature was raised.
基金National Science Foundation of China (51002024)"863" High-Tech Project (2007AA03Z201)
文摘YBCO high temperature coated conductors are the most promising candidate for large scale superconducting transmission cables and fault current limiters. A modified TFA-MOD method was applied to prepare YBCO layer on Rolling Assisted Biaxially Textured Substrate (RABiTS) with textured Y 2 O 3 /YSZ/CeO 2 buffer layers, resulting in reduced time and cost of fabrication. By using Cu naphthenate instead of Cu(TFA) 2 , the pyrolysis time of the YBCO precursors was reduced significantly. YBCO films with thickness of 2 μm were fabricated with multiple-coating and annealed at high temperature for 2 h. X-ray diffraction analysis revealed that the films were c-axis oriented. The preliminary results of YBCO films yielded 0.2 MA/cm 2 at 77 K and self field. It is believed current carrying ability of YBCO films could be further improved by reducing the reaction rate at the interface between the buffer layer and superconducting layer.
基金financially supported by the National Basic Research Program of China(973 ProgramGrant 2012CB215504)the National Natural Science Foundation of China(21203191 and 21306190)
文摘In this paper, 1,2,4-triazolium methanesulfonate （C_2H_4N_3^＋-CH_3SO_3^-, [Tri][MS]）, an ionic conductor, was successfully synthesized. It exhibited high ionic conductivity of 18.60 mS·cm^-1 at 140 ℃ and reached up to 36.51 mS·cm^-1 at 190 ℃. [Tri][MS] was first applied to modify Nation membrane to fabricate [Tri][MS]/Nafion membrane by impregnation method at 150 ℃. The prepared composite membrane showed high thermal stability with decomposed temperature above 200 ℃ in air atmosphere. In addition, the membrane indicated good ionic conductivity with 3.67 mS·cm^-1 at 140 ℃ and reached up to 13.23 mS·cm^-1 at 180 ℃. The structure of the [Tri][MS] and the composite membrane were characterized by FTIR and the compatibility of [Tri][MS] and Pt/C catalyst was studied by a cyclic voltammetry （CV） method. Besides, the [Tri][MS]/Nafion membrane （thickness of 65 μm） was evaluated with single fuel cell at high temperature and without humidification. The highest power density of [Tri][MS]/Nafion membrane was 3.20 mW·cm^-2 at 140 ℃ and 4.90 mW·cm^-2 at 150 ℃, which was much higher than that of Nation membrane.
基金supported by the Priority Base Research Development Project of China (No. 0559730532)
文摘Cable-in-conduit conductor （CICC） conductor sample of the PF2 coil for ITER was tested in the SULTAN facility. According to the test results, the CICC conductor sample exhibited a stable performance regarding the current sharing temperature. Under the typical operational conditions of a current of 45 kA, a magnetic field of 4 T and a temperature of 5 K for PF2, the test result for the conductor current sharing temperature is 6.71 K, with a temperature margin of 1.71 K. For a comparison thermal-hydraulic analysis of the PF2 conductor was carried out using GANDALF code in a 1-D model, and the result is consistent with the test one.
基金supported by the National Natural Science Foundation of China(Grant 11622217)the National Key Project of Scientific Instrument and Equipment Development(Grant 11327802)supported by the Fundamental Research Funds for the Central Universities(Grants lzujbky-2017-ot18,lzujbky-2017-k18)
文摘The central solenoid（CS）is one of the key components of the International Thermonuclear Experimental Reactor（ITER）tokamak and which is often considered as the heart of this fusion reactor.This solenoid will be built by using Nb3Sn cablein-conduit conductors（CICC）,capable of generating a 13 T magnetic field.In order to assess the performance of the Nb3Sn CICC in nearly the ITER condition,many short samples have been evaluated at the SULTAN test facility（the background magnetic field is of 10.85 T with the uniform length of 400 mm at 1%homogeneity）in Centre de Recherches en Physique des Plasma（CRPP）.It is found that the samples with pseudo-long twist pitch（including baseline specimens）show a significant degradation in the current-sharing temperature（Tcs）,while the qualification tests of all short twist pitch（STP）samples,which show no degradation versus electromagnetic cycling,even exhibits an increase of Tcs.This behavior was perfectly reproduced in the coil experiments at the central solenoid model coil（CSMC）facility last year.In this paper,the complex structure of the Nb3Sn CICC would be simplified into a wire rope consisting of six petals and a cooling spiral.An analytical formula for the Tcs behavior as a function of the axial strain of the cable is presented.Based on this,the effects of twist pitch,axial and transverse stiffness,thermal mismatch,cycling number,magnetic distribution,etc.,on the axial strain are discussed systematically.The calculated Tcs behavior with cycle number show consistency with the previous experimental results qualitatively and quantitatively.Lastly,we focus on the relationship between Tcs and axial strain of the cable,and we conclude that the Tcs behavior caused by electromagnetic cycles is determined by the cable axial strain.Once the cable is in a compression situation,this compression strain and its accumulation would lead to the Tcs degradation.The experimental observation of the Tcs enhancement in the CS STP samples should be considered as a contribution of the shorter length of the high field zone in SULTAN and CSMC devices,as well as the tight cable structure.
