LiDAR and camera are two of the most common sensors used in the fields of robot perception,autonomous driving,augmented reality,and virtual reality,where these sensors are widely used to perform various tasks such as ...LiDAR and camera are two of the most common sensors used in the fields of robot perception,autonomous driving,augmented reality,and virtual reality,where these sensors are widely used to perform various tasks such as odometry estimation and 3D reconstruction.Fusing the information from these two sensors can significantly increase the robustness and accuracy of these perception tasks.The extrinsic calibration between cameras and LiDAR is a fundamental prerequisite for multimodal systems.Recently,extensive studies have been conducted on the calibration of extrinsic parameters.Although several calibration methods facilitate sensor fusion,a comprehensive summary for researchers and,especially,non-expert users is lacking.Thus,we present an overview of extrinsic calibration and discuss diverse calibration methods from the perspective of calibration system design.Based on the calibration information sources,this study classifies these methods as target-based or targetless.For each type of calibration method,further classification was performed according to the diverse types of features or constraints used in the calibration process,and their detailed implementations and key characteristics were introduced.Thereafter,calibration-accuracy evaluation methods are presented.Finally,we comprehensively compare the advantages and disadvantages of each calibration method and suggest directions for practical applications and future research.展开更多
In data communication,limited communication resources often lead to measurement bias,which adversely affects subsequent system estimation if not effectively handled.This paper proposes a novel bias calibration algorit...In data communication,limited communication resources often lead to measurement bias,which adversely affects subsequent system estimation if not effectively handled.This paper proposes a novel bias calibration algorithm under communication constraints to achieve accurate system states of the interested system.An output-based event-triggered scheme is first employed to alleviate transmission burden.Accounting for the limited-communication-induced measurement bias,a novel bias calibration algorithm following the Kalman filtering line is developed to restrain the effect of the measurement bias on system estimation,thereby achieving accurate system state estimates.Subsequently,the Field Programmable Gate Array(FPGA)implementation of the proposed algorithm is also realized with the hope of providing fast bias calibration in practical scenarios.A simulation about a numerical example and a practical example(for gyroscope’s angular velocity bias calibration)on MATLAB is provided to demonstrate the feasibility and effectiveness of the proposed algorithm.展开更多
We present the preparation and measurement of the radioactive isotope^(37)Ar,which was produced using thermal neutrons from a reactor,as a calibration source for liquid xenon time projection chambers.^(37)Ar is a low-...We present the preparation and measurement of the radioactive isotope^(37)Ar,which was produced using thermal neutrons from a reactor,as a calibration source for liquid xenon time projection chambers.^(37)Ar is a low-energy calibration source with a half-life of 35.01 days,making it suitable for calibration in the low-energy region of liquid xenon dark-matter experiments.Radioactive isotope^(37)Ar was produced by irradiating ^(36)Ar with thermal neutrons.It was subsequently measured in a gaseous xenon time projection chamber(GXe TPC)to validate its radioactivity.Our results demonstrate that^(37)Ar is an effective and viable calibration source that offers precise calibration capabilities in the low-energy domain of xenon-based detectors.展开更多
Large-volume presses(LVPs)are widely utilized in diverse research fields—including high-pressure physics,chemistry,materials science,and Earth and planetary sciences—to investigate the physical and chemical properti...Large-volume presses(LVPs)are widely utilized in diverse research fields—including high-pressure physics,chemistry,materials science,and Earth and planetary sciences—to investigate the physical and chemical properties of materials under extreme high-pressure and hightemperature conditions.A prerequisite for achieving reproducible property measurements is the determination and control of pressure within experimental setups.However,the lack of precise pressure calibration in LVPs hinders the broader application of such devices in ultrahigh-pressure studies.This study employs a suite of standard phase transition-based pressure markers—comprising metallic conductors,semiconductors,and minerals—through both in situ and ex situ identification approaches,to establish pressure calibration curves ranging from 0.4 to>30 GPa for various types of LVP installed at the Center for High Pressure Science and Technology Advanced Research(HPSTAR),Beijing,including piston–cylinder,cubic,and multi-anvil presses.The results provide a unified and traceable pressure reference for highpressure experiments conducted at HPSTAR,while also offering technical guidance and calibration standards for other researchers utilizing similar LVP systems,thereby enabling more consistent comparison between different laboratories.This work facilitates the advancement of LVP research toward broader applications in higher-pressure regimes.展开更多
The virtual in-situ calibration method has been effective in calibrating multiple sensors in HVAC systems when the fault types are known.However,due to the high cost of physical calibration and the strict data accurac...The virtual in-situ calibration method has been effective in calibrating multiple sensors in HVAC systems when the fault types are known.However,due to the high cost of physical calibration and the strict data accuracy requirements of data-driven methods,obtaining benchmarks for sensors during actual operation is challenging,making it difficult to diagnose the specific fault types of the sensors.To address this issue,an enhanced multi-sensor calibration(EMC)method has been developed to operate without prior knowledge of fault types.The primary soft faults encountered—bias and drift deviations—differ in whether they vary over time.The proposed method employs an interval sliding approach to identify and calibrate these faults within each interval effectively.Furthermore,the influence of interval size on calibration accuracy has been systematically analyzed to optimize performance.The proposed method has been validated on a chiller plant in a large public building in Hong Kong.The experimental results indicate that,under conditions involving eight sensor faults,including even three drift deviations,the EMC method achieved average calibration accurate rates of 100%for bias faults and 95%for drift faults.Notably,in calibrating drift faults,the enhanced method outperformed the high-dimensional sensor calibration method and the Improved simulated annealing method by 87%and 34%,respectively.展开更多
Multi-sensor vision system plays an important role in the 3D measurement of large objects.However,due to the widely distribution of sensors,the problem of lacking common fields of view（FOV） arises frequently,which m...Multi-sensor vision system plays an important role in the 3D measurement of large objects.However,due to the widely distribution of sensors,the problem of lacking common fields of view（FOV） arises frequently,which makes the global calibration of the vision system quite difficult.The primary existing solution relies on large-scale surveying equipments,which is ponderous and inconvenient for field calibrations.In this paper,a global calibration method of multi-sensor vision system is proposed and investigated.The proposed method utilizes pairs of skew laser lines,which are generated by a group of laser pointers,as the calibration objects.Each pair of skew laser lines provides a unique coordinate system in space which can be reconstructed in certain vision sensor＇s coordinates by using a planar pattern.Then the geometries of sensors are computed under rigid transformation constrains by taking coordinates of each skew lines pair as the intermediary.The method is applied on both visual cameras with synthetic data and a real two-camera vision system;results show the validity and good performance.The prime contribution of this paper is taking skew laser lines as the global calibration objects,which makes the method simple and flexible.The method need no expensive equipments and can be used in large-scale calibration.展开更多
High-precision magnetic field measurements are crucial for understanding Earth’s internal structure,space environment,and dynamic geomagnetic variations.Data from the Fluxgate Magnetometer (FGM) on the Macao Science ...High-precision magnetic field measurements are crucial for understanding Earth’s internal structure,space environment,and dynamic geomagnetic variations.Data from the Fluxgate Magnetometer (FGM) on the Macao Science Satellite-1A (MSS-1A),added to data from other space-based magnetometers,should increase significantly the ability of scientists to observe changes in Earth’s magnetic field over time and space.Additionally,the MSS-1A’s FGM is intended to help identify magnetic disturbances affecting the spacecraft itself.This report focuses on the in-flight calibration of the MSS-1 FGM.A scalar calibration,independent of geomagnetic field models,was performed to correct offsets,sensitivities,and misalignment angles of the FGM.Using seven months of data,we find that the in-flight calibration parameters show good stability.We determined Euler angles describing the rotational relationship between the FGM and the Advanced Stellar Compass (ASC) coordinate system using two approaches:calibration with the CHAOS-7 geomagnetic field model,and simultaneous estimation of Euler angles and Gaussian spherical harmonic coefficients through self-consistent modeling.The accuracy of Euler angles describing the rotation was better than 18 arcsec.The calibrated FGM data exhibit good agreement with the calibrated data of the Vector Field Magnetometer (VFM),which is the primary vector magnetometer of the satellite.These calibration efforts have significantly improved the accuracy of the FGM measurements,which are now providing reliable data for geomagnetic field studies that promise to advance our understanding of the Earth’s magnetic environment.展开更多
Currently,there is a lack of in-situ or model test results for cone penetration tests(CPTs)conducted in deep,dense sand layers under high overburden stresses,restricting the development of empirical relationships betw...Currently,there is a lack of in-situ or model test results for cone penetration tests(CPTs)conducted in deep,dense sand layers under high overburden stresses,restricting the development of empirical relationships between CPT results and the characteristics of such deep,dense sand layers.This study addresses this gap by proposing an empirical relationship to predict the relative density of dense silica sand based on stress level and cone tip resistance.The relationship was developed through CPTs performed in a calibration chamber using dense sand specimens(with relative densities of 74%-91%)subjected to high stresses(under overburden stresses of 0.5-2.0 MPa)and numerical simulations employing the large deformation finite element method.The Arbitrary Lagrangian Eulerian method was used to regularly regenerate the mesh to prevent soil element distortion around the cone tip.Additionally,the modified Mohr-Coulomb model was integrated to capture the stress-strain behavior of dense silica sand under high stresses.A reasonable agreement was achieved between the numerical and experimental penetration profiles,which verifies the reliability of the numerical model.A sufficient number of parametric analyses were carried out,and then an empirical equation was proposed to establish the relationship between the relative density of dense sand,stress level and cone resistance.The empirical equation provides predictions with acceptable accuracy,as the discrepancies between the predicted and measured relative density values fall within±30%.展开更多
Accurate calibration of surgical instruments and ultrasound probes is essential for achieving high precision in image guided minimally invasive procedures.However,existing methods typically treat the calibration of th...Accurate calibration of surgical instruments and ultrasound probes is essential for achieving high precision in image guided minimally invasive procedures.However,existing methods typically treat the calibration of the needle tip and the ultrasound probe as two independent processes,lacking an integrated calibration mechanism,which often leads to cumulative errors and reduced spatial consistency.To address this challenge,we propose a joint calibration model that unifies the calibration of the surgical needle tip and the ultrasound probe within a single coordinate system.The method formulates the calibration process through a series of mathematical models and coordinate transformation models and employs a gradient descent based optimization to refine the parameters of these models.By establishing and iteratively optimizing a template coordinate system through modeling of constrained spherical motion,the proposed joint calibration model achieves submillimeter accuracy in needle tip localization.Building upon this,an N line based calibration model is developed to determine the spatial relationship between the probe and the ultrasound image plane,resulting in an average pixel deviation of only 1.2373 mm.Experimental results confirm that this unified modeling approach effectively overcomes the limitations of separate calibration schemes,significantly enhancing both precision and robustness,and providing a reliable computational model for surgical navigation systems that require high spatial accuracy without relying on ionizing radiation.展开更多
The response and performance of radiation detectors for accurate measurements and effective use for radiological safety in medical, industrial, and nuclear sectors are based on the optimal use, maintenance, repair and...The response and performance of radiation detectors for accurate measurements and effective use for radiological safety in medical, industrial, and nuclear sectors are based on the optimal use, maintenance, repair and calibration of radiation monitoring instruments in a secondary standard dosimetry laboratory. In Nigeria, the suboptimal performances of these instruments are attributed to inadequate maintenance practices, insufficient calibration, and limited awareness of proper equipment handling for optimal use. This study assesses the current practices related to the optimal use, maintenance, repair, and calibration of radiation detection equipment across Nigeria’s six geopolitical zones. Using a cross-sectional survey approach, data were collected from Ninety (90) radiation monitoring equipment operators, Radiation Safety Officers, and frontline responders to evaluate their knowledge, awareness, and practices concerning equipment usage, operation, storage, handling, and calibration. The findings reveal significant gaps in knowledge of usage (trained is 43.2%, not trained is 56.8%) and inconsistencies in maintenance practices (as indicated by the regression analysis (β = 0.51, p < 0.01), particularly regarding specialized instruments such as the PackEye, Mobile Detection System (MDS), Radionuclide Identifinder (RID), and Personal Radiation Detectors (PRD). While there is high awareness of the need for regular calibration and handling training, the lack of standardized protocols and training alignment poses challenges to the effective use of these instruments. This study underscores the importance of comprehensive training programs, standardized maintenance protocols, and enhanced awareness initiatives to optimize the usage, performance and safety of radiation monitoring instruments in Nigeria.展开更多
Radiation detectors, such as survey meters, are essential for ensuring radiation safety in various sectors, including healthcare, industrial processing, emergency response, etc. However, regular calibration and proper...Radiation detectors, such as survey meters, are essential for ensuring radiation safety in various sectors, including healthcare, industrial processing, emergency response, etc. However, regular calibration and proper maintenance of survey meters are important in order to ascertain their accuracy and reliability. This study provides a comprehensive retrospective assessment of the calibration behaviour, durability, and fault trends of 160 survey meters, spanning ten different models. They were calibrated at the Secondary Standard Dosimetry Laboratory (SSDL) in Nigeria over a decade (2012-2023) using an X-Ray Beam Irradiator Model X80-225K and Cs-137 irradiator (OB6) with a PTW reference spherical chamber traceable to the IAEA SSDL in Seibersdorf, Austria. The calibration stability of each model was evaluated, revealing that models like Instrument A and Instrument B demonstrated high reliability with calibration factors close to the ideal value of 1, while models like Instrument C exhibited higher variability, suggesting less consistent performance for dose rate monitoring. Fault analysis showed that the most common issues were related to the battery compartment, indicating a need for improved handling practices. Correlation analysis reveals no statistically significant correlation between calibration factor and age of survey meter across the analysed models. The study concludes that regular calibration, proper handling, and user training are crucial for maintaining the accuracy and longevity of radiation detectors.展开更多
In various imaging applications such as autonomous vehicles and drones,autofocus lenses are indispensable for capturing clear images.However,conventional camera calibration methods typically rely either on processing ...In various imaging applications such as autonomous vehicles and drones,autofocus lenses are indispensable for capturing clear images.However,conventional camera calibration methods typically rely either on processing multiple images at a fixed focal length or on detecting multi-plane markers in a single image and then applying multi-image calibration models.This paper proposes a flexible and accurate calibration approach that extracts subpixel saddle points from a single image containing three non-coplanar calibration boards.To compute accurate homography matrices for the three boards,outliers are removed by eliminating chessboard points that deviated from the fitted grid lines according to their row and column positions.Initial estimates of the intrinsic parameters and the poses of the three planar chessboards are obtained using the three homography matrices in combination with Zhang’s calibration method.During parameter refinement,a multi-objective optimization function is constructed,incorporating three error terms:(1)Reprojection error of the inlier grid points;(2)Mechanism-driven error derived from the relationship between homography matrices and camera parameters;(3)Cross-planar linearity constraint error,which preserves the pre-imaging collinearity of any five points across different planes after projection.For weight selection in the optimization process,confidence intervals of the detected grid points are analyzed by horizontally rotating the reprojection lines to reduce bias introduced by line slope.The optimal weights are determined by minimizing the number of points whose confidence intervals does not intersect the reprojected lines.When multiple candidates yield similar reprojection performance,the parameter set with the smallest reprojection error is selected as the final result.This method efficiently estimates both intrinsic and extrinsic camera parameters.Simulations and real-world experiments validate the high precision and effectiveness of the proposed approach.Our technique is straightforward,practical,and holds significant theoretical and practical value for rapid and reliable camera calibration.展开更多
In clinical environments,the prolonged utilization of polarization equipment can result in theaccumulation of errors over extended periods.The absence of expeditious calibration techniques in clinical practice present...In clinical environments,the prolonged utilization of polarization equipment can result in theaccumulation of errors over extended periods.The absence of expeditious calibration techniques in clinical practice presents a significant obstacle in preserving the precision and dependability of these instruments.To address this challenge,we propose an innovative research study that presents a comprebersive calibration system specifically designed for the calibration of the backscattering Muellet matrix measurement system,enabling swift online calibration acroes various scenarios.This system employs an external calibration framework for rmal-time adjust-ment of the polarizer's initial angle,oversecing the rotation of PSG and PSA motors through position measurement and control procedures,with light intensity monitored by a camera.By incorporating moment um concepts and the Adam optimization algorithm,we enhance conver-gence speed,mitigate noise,and improve calibration accuracy.Experimental results showcase the exceptional precision,speed,and robustness of oрroposed method,achieving high acсuracy and minimal error,thereby offering a promising solution for maintaining the reliabilit y of polarization equipment in clinical settings.展开更多
To enhance direction of arrival(DOA)estimation accuracy,this paper proposes a low-cost method for calibrating farfield steering vectors of large aperture millimeter wave radar(mmWR).To this end,we first derive the ste...To enhance direction of arrival(DOA)estimation accuracy,this paper proposes a low-cost method for calibrating farfield steering vectors of large aperture millimeter wave radar(mmWR).To this end,we first derive the steering vectors with amplitude and phase errors,assuming that mmWR works in the time-sharing mode.Then,approximate relationship between the near-field calibration steering vector and the far-field calibration steering vector is analyzed,which is used to accomplish the mapping between the two of them.Finally,simulation results verify that the proposed method can effectively improve the angle measurement accuracy of mmWR with existing amplitude and phase errors.展开更多
In order to get rid of the dependence on high-precision centrifuges in accelerometer nonlinear coefficients calibration,this paper proposes a system-level calibration method for field condition.Firstly,a 42-dimension ...In order to get rid of the dependence on high-precision centrifuges in accelerometer nonlinear coefficients calibration,this paper proposes a system-level calibration method for field condition.Firstly,a 42-dimension Kalman filter is constructed to reduce impact brought by turntable.Then,a biaxial rotation path is designed based on the accelerometer output model,including orthogonal 22 positions and tilt 12 positions,which enhances gravity excitation on nonlinear coefficients of accelerometer.Finally,sampling is carried out for calibration and further experiments.The results of static inertial navigation experiments lasting 4000 s show that compared with the traditional method,the proposed method reduces the position error by about 390 m.展开更多
Vector magnetic measurement is increasingly widely used.In order to improve the accuracy of vector magnetic measurement system on board a vehicle,researchers have proposed various calibration methods.Most of them requ...Vector magnetic measurement is increasingly widely used.In order to improve the accuracy of vector magnetic measurement system on board a vehicle,researchers have proposed various calibration methods.Most of them require altering the magnetic vector in the vehicle coordinate system.Exploring the use of geomagnetic variation to change the geomagnetic vector in the vehicle coordinate system,this paper proposes a novel vector magnetic measurement calibration method.In this method,a vector magnetometer mounted on a vehicle and an accurate vector magnetometer separately measure the geomagnetic field at diff erent locations within the same area.Based on the physical principle that the geomagnetic variation at two nearby locations is equal,the calibration parameters of the magnetometer on the vehicle can be determined through a set of equations containing the measurements from the two magnetometers.The theoretical derivation and simulation experiment results demonstrate the feasibility of this method.Therefore,it can serve as a new alternative calibration method,especially in scenarios where a high degree of accuracy in the estimation of calibration parameters is not required.展开更多
Traditional calibration method for the digital inclinometer relies on manual inspection,and results in its disadvantages of complicated process,low-efficiency and human errors easy to be introduced.To improve both the...Traditional calibration method for the digital inclinometer relies on manual inspection,and results in its disadvantages of complicated process,low-efficiency and human errors easy to be introduced.To improve both the calibration accuracy and efficiency of digital inclinometer,an automatic digital inclinometer calibration system was developed in this study,and a new display tube recognition algorithm was proposed.First,a high-precision automatic turntable was taken as the reference to calculate the indication error of the inclinometer.Then,the automatic inclinometer calibration control process and the digital inclinometer zero-setting function were formulated.For display tube recognition,a new display tube recognition algorithm combining threading method and feature extraction method was proposed.Finally,the calibration system was calibrated by photoelectric autocollimator and regular polygon mirror,and the calibration system error and repeatability were calculated via a series of experiments.The experimental results showed that the indication error of the proposed calibration system was less than 4",and the repeatability was 3.9".A digital inclinometer with the resolution of 0.1°was taken as a testing example,within the calibration points'range of[-90°,90°],the repeatability of the testing was 0.085°,and the whole testing process was less than 90 s.The digital inclinometer indication error is mainly introduced by the digital inclinometer resolution according to the uncertainty evaluation.展开更多
Current research on robot calibration can be roughly classified into two categories,and both of them have certain inherent limitations.Model-based methods are difficult to model and compensate the pose errors arising ...Current research on robot calibration can be roughly classified into two categories,and both of them have certain inherent limitations.Model-based methods are difficult to model and compensate the pose errors arising from configuration-dependent geometric and non-geometric source errors,whereas the accuracy of data-driven methods depends on a large amount of measurement data.Using a 5-DOF(degrees of freedom)hybrid machining robot as an exemplar,this study presents a model data-driven approach for the calibration of robotic manipulators.An f-DOF realistic robot containing various source errors is visualized as a 6-DOF fictitious robot having error-free parameters,but erroneous actuated/virtual joint motions.The calibration process essentially involves four steps:(1)formulating the linear map relating the pose error twist to the joint motion errors,(2)parameterizing the joint motion errors using second-order polynomials in terms of nominal actuated joint variables,(3)identifying the polynomial coefficients using the weighted least squares plus principal component analysis,and(4)compensating the compensable pose errors by updating the nominal actuated joint variables.The merit of this approach is that it enables compensation of the pose errors caused by configuration-dependent geometric and non-geometric source errors using finite measurement configurations.Experimental studies on a prototype machine illustrate the effectiveness of the proposed approach.展开更多
Although Quercus mongolica is a widely distributed,economically and ecologically important deciduous tree in northern China,models to accurately predict stand growth at a regional scale are limited.The physiological p...Although Quercus mongolica is a widely distributed,economically and ecologically important deciduous tree in northern China,models to accurately predict stand growth at a regional scale are limited.The physiological process model(3-PG)has the potential to predict stand growth dynamics under varying site conditions and climate change scenarios.Here,we used field inventory,tree ring sampling,and Bayesian calibration to parameterize a model for Q.mongolica.Stand volume and productivity were then predicted under present conditions and three future climate scenarios(RCP26,RCP45 and RCP85).Our results demonstrated that after Bayesian calibration,the posterior ranges of the sensitivity parameters apha Cx,wSx1000 and pRn accounted for 34%,45%and 65%,respectively,of their prior range.Calibration and validation results revealed a strong correlation between predicted and measured values(R^(2)>0.87,P<0.01),with<20%bias for all growth indicators.Stand volume was projected to increase by 145%and productivity by 80%by the year 2100 under the RCP85 scenario,although these projections may vary across regions.The present study developed a tailored set of 3-PG model parameters for Q.mongolica,based on a comprehensive range of climate conditions,stand structure,and age classes.These parameters offer a scientific basis to accurately predict growth of other monospecific oak or mixed-species stands.展开更多
基金Supported by Beijing Natural Science Foundation(Grant No.L241012)the National Natural Science Foundation of China(Grant No.62572468).
文摘LiDAR and camera are two of the most common sensors used in the fields of robot perception,autonomous driving,augmented reality,and virtual reality,where these sensors are widely used to perform various tasks such as odometry estimation and 3D reconstruction.Fusing the information from these two sensors can significantly increase the robustness and accuracy of these perception tasks.The extrinsic calibration between cameras and LiDAR is a fundamental prerequisite for multimodal systems.Recently,extensive studies have been conducted on the calibration of extrinsic parameters.Although several calibration methods facilitate sensor fusion,a comprehensive summary for researchers and,especially,non-expert users is lacking.Thus,we present an overview of extrinsic calibration and discuss diverse calibration methods from the perspective of calibration system design.Based on the calibration information sources,this study classifies these methods as target-based or targetless.For each type of calibration method,further classification was performed according to the diverse types of features or constraints used in the calibration process,and their detailed implementations and key characteristics were introduced.Thereafter,calibration-accuracy evaluation methods are presented.Finally,we comprehensively compare the advantages and disadvantages of each calibration method and suggest directions for practical applications and future research.
基金support from the National Natural Science Foundation of China(Grant Nos.U2330206,U2230206,62173068)Sichuan Science and Technology Program(Grants Nos.2024NSFSC1483,2024ZYD0156,2023NSFC1962,DQ202412).
文摘In data communication,limited communication resources often lead to measurement bias,which adversely affects subsequent system estimation if not effectively handled.This paper proposes a novel bias calibration algorithm under communication constraints to achieve accurate system states of the interested system.An output-based event-triggered scheme is first employed to alleviate transmission burden.Accounting for the limited-communication-induced measurement bias,a novel bias calibration algorithm following the Kalman filtering line is developed to restrain the effect of the measurement bias on system estimation,thereby achieving accurate system state estimates.Subsequently,the Field Programmable Gate Array(FPGA)implementation of the proposed algorithm is also realized with the hope of providing fast bias calibration in practical scenarios.A simulation about a numerical example and a practical example(for gyroscope’s angular velocity bias calibration)on MATLAB is provided to demonstrate the feasibility and effectiveness of the proposed algorithm.
基金supported by National Key R&D grant from the Ministry of Science and Technology of China(Nos.2021YFA1601600,2023YFA1606200)National Science Foundation of China(Nos.12090062,12105008)the Major State Basic Research Development Program of China.
文摘We present the preparation and measurement of the radioactive isotope^(37)Ar,which was produced using thermal neutrons from a reactor,as a calibration source for liquid xenon time projection chambers.^(37)Ar is a low-energy calibration source with a half-life of 35.01 days,making it suitable for calibration in the low-energy region of liquid xenon dark-matter experiments.Radioactive isotope^(37)Ar was produced by irradiating ^(36)Ar with thermal neutrons.It was subsequently measured in a gaseous xenon time projection chamber(GXe TPC)to validate its radioactivity.Our results demonstrate that^(37)Ar is an effective and viable calibration source that offers precise calibration capabilities in the low-energy domain of xenon-based detectors.
基金supported by the National Science Foundation of China(Grant Nos.U1530402 and U1930401).
文摘Large-volume presses(LVPs)are widely utilized in diverse research fields—including high-pressure physics,chemistry,materials science,and Earth and planetary sciences—to investigate the physical and chemical properties of materials under extreme high-pressure and hightemperature conditions.A prerequisite for achieving reproducible property measurements is the determination and control of pressure within experimental setups.However,the lack of precise pressure calibration in LVPs hinders the broader application of such devices in ultrahigh-pressure studies.This study employs a suite of standard phase transition-based pressure markers—comprising metallic conductors,semiconductors,and minerals—through both in situ and ex situ identification approaches,to establish pressure calibration curves ranging from 0.4 to>30 GPa for various types of LVP installed at the Center for High Pressure Science and Technology Advanced Research(HPSTAR),Beijing,including piston–cylinder,cubic,and multi-anvil presses.The results provide a unified and traceable pressure reference for highpressure experiments conducted at HPSTAR,while also offering technical guidance and calibration standards for other researchers utilizing similar LVP systems,thereby enabling more consistent comparison between different laboratories.This work facilitates the advancement of LVP research toward broader applications in higher-pressure regimes.
基金the Natural Science Foundation of Jiangsu Province(BK20240560)the China Postdoctoral Science Foundation(2024M764219)+1 种基金the Science and Technology Project of Jiangsu Provincial Department of Housing and Urban Rural Development(2023ZD026)the Science and Technology Project of Nanjing Municipal Commission of Urban and Rural Development(Ks2415).
文摘The virtual in-situ calibration method has been effective in calibrating multiple sensors in HVAC systems when the fault types are known.However,due to the high cost of physical calibration and the strict data accuracy requirements of data-driven methods,obtaining benchmarks for sensors during actual operation is challenging,making it difficult to diagnose the specific fault types of the sensors.To address this issue,an enhanced multi-sensor calibration(EMC)method has been developed to operate without prior knowledge of fault types.The primary soft faults encountered—bias and drift deviations—differ in whether they vary over time.The proposed method employs an interval sliding approach to identify and calibrate these faults within each interval effectively.Furthermore,the influence of interval size on calibration accuracy has been systematically analyzed to optimize performance.The proposed method has been validated on a chiller plant in a large public building in Hong Kong.The experimental results indicate that,under conditions involving eight sensor faults,including even three drift deviations,the EMC method achieved average calibration accurate rates of 100%for bias faults and 95%for drift faults.Notably,in calibrating drift faults,the enhanced method outperformed the high-dimensional sensor calibration method and the Improved simulated annealing method by 87%and 34%,respectively.
基金supported by National Natural Science Foundation of China (Grant No. 60804060)Research Fund for the Doctoral Program of Higher Education of China (Grant No. 200800061003)
文摘Multi-sensor vision system plays an important role in the 3D measurement of large objects.However,due to the widely distribution of sensors,the problem of lacking common fields of view（FOV） arises frequently,which makes the global calibration of the vision system quite difficult.The primary existing solution relies on large-scale surveying equipments,which is ponderous and inconvenient for field calibrations.In this paper,a global calibration method of multi-sensor vision system is proposed and investigated.The proposed method utilizes pairs of skew laser lines,which are generated by a group of laser pointers,as the calibration objects.Each pair of skew laser lines provides a unique coordinate system in space which can be reconstructed in certain vision sensor＇s coordinates by using a planar pattern.Then the geometries of sensors are computed under rigid transformation constrains by taking coordinates of each skew lines pair as the intermediary.The method is applied on both visual cameras with synthetic data and a real two-camera vision system;results show the validity and good performance.The prime contribution of this paper is taking skew laser lines as the global calibration objects,which makes the method simple and flexible.The method need no expensive equipments and can be used in large-scale calibration.
文摘High-precision magnetic field measurements are crucial for understanding Earth’s internal structure,space environment,and dynamic geomagnetic variations.Data from the Fluxgate Magnetometer (FGM) on the Macao Science Satellite-1A (MSS-1A),added to data from other space-based magnetometers,should increase significantly the ability of scientists to observe changes in Earth’s magnetic field over time and space.Additionally,the MSS-1A’s FGM is intended to help identify magnetic disturbances affecting the spacecraft itself.This report focuses on the in-flight calibration of the MSS-1 FGM.A scalar calibration,independent of geomagnetic field models,was performed to correct offsets,sensitivities,and misalignment angles of the FGM.Using seven months of data,we find that the in-flight calibration parameters show good stability.We determined Euler angles describing the rotational relationship between the FGM and the Advanced Stellar Compass (ASC) coordinate system using two approaches:calibration with the CHAOS-7 geomagnetic field model,and simultaneous estimation of Euler angles and Gaussian spherical harmonic coefficients through self-consistent modeling.The accuracy of Euler angles describing the rotation was better than 18 arcsec.The calibrated FGM data exhibit good agreement with the calibrated data of the Vector Field Magnetometer (VFM),which is the primary vector magnetometer of the satellite.These calibration efforts have significantly improved the accuracy of the FGM measurements,which are now providing reliable data for geomagnetic field studies that promise to advance our understanding of the Earth’s magnetic environment.
基金National Natural Science Foundation of China(Nos.42025702,52394251)。
文摘Currently,there is a lack of in-situ or model test results for cone penetration tests(CPTs)conducted in deep,dense sand layers under high overburden stresses,restricting the development of empirical relationships between CPT results and the characteristics of such deep,dense sand layers.This study addresses this gap by proposing an empirical relationship to predict the relative density of dense silica sand based on stress level and cone tip resistance.The relationship was developed through CPTs performed in a calibration chamber using dense sand specimens(with relative densities of 74%-91%)subjected to high stresses(under overburden stresses of 0.5-2.0 MPa)and numerical simulations employing the large deformation finite element method.The Arbitrary Lagrangian Eulerian method was used to regularly regenerate the mesh to prevent soil element distortion around the cone tip.Additionally,the modified Mohr-Coulomb model was integrated to capture the stress-strain behavior of dense silica sand under high stresses.A reasonable agreement was achieved between the numerical and experimental penetration profiles,which verifies the reliability of the numerical model.A sufficient number of parametric analyses were carried out,and then an empirical equation was proposed to establish the relationship between the relative density of dense sand,stress level and cone resistance.The empirical equation provides predictions with acceptable accuracy,as the discrepancies between the predicted and measured relative density values fall within±30%.
基金Support by Sichuan Science and Technology Program[2023YFSY0026,2023YFH0004].
文摘Accurate calibration of surgical instruments and ultrasound probes is essential for achieving high precision in image guided minimally invasive procedures.However,existing methods typically treat the calibration of the needle tip and the ultrasound probe as two independent processes,lacking an integrated calibration mechanism,which often leads to cumulative errors and reduced spatial consistency.To address this challenge,we propose a joint calibration model that unifies the calibration of the surgical needle tip and the ultrasound probe within a single coordinate system.The method formulates the calibration process through a series of mathematical models and coordinate transformation models and employs a gradient descent based optimization to refine the parameters of these models.By establishing and iteratively optimizing a template coordinate system through modeling of constrained spherical motion,the proposed joint calibration model achieves submillimeter accuracy in needle tip localization.Building upon this,an N line based calibration model is developed to determine the spatial relationship between the probe and the ultrasound image plane,resulting in an average pixel deviation of only 1.2373 mm.Experimental results confirm that this unified modeling approach effectively overcomes the limitations of separate calibration schemes,significantly enhancing both precision and robustness,and providing a reliable computational model for surgical navigation systems that require high spatial accuracy without relying on ionizing radiation.
文摘The response and performance of radiation detectors for accurate measurements and effective use for radiological safety in medical, industrial, and nuclear sectors are based on the optimal use, maintenance, repair and calibration of radiation monitoring instruments in a secondary standard dosimetry laboratory. In Nigeria, the suboptimal performances of these instruments are attributed to inadequate maintenance practices, insufficient calibration, and limited awareness of proper equipment handling for optimal use. This study assesses the current practices related to the optimal use, maintenance, repair, and calibration of radiation detection equipment across Nigeria’s six geopolitical zones. Using a cross-sectional survey approach, data were collected from Ninety (90) radiation monitoring equipment operators, Radiation Safety Officers, and frontline responders to evaluate their knowledge, awareness, and practices concerning equipment usage, operation, storage, handling, and calibration. The findings reveal significant gaps in knowledge of usage (trained is 43.2%, not trained is 56.8%) and inconsistencies in maintenance practices (as indicated by the regression analysis (β = 0.51, p < 0.01), particularly regarding specialized instruments such as the PackEye, Mobile Detection System (MDS), Radionuclide Identifinder (RID), and Personal Radiation Detectors (PRD). While there is high awareness of the need for regular calibration and handling training, the lack of standardized protocols and training alignment poses challenges to the effective use of these instruments. This study underscores the importance of comprehensive training programs, standardized maintenance protocols, and enhanced awareness initiatives to optimize the usage, performance and safety of radiation monitoring instruments in Nigeria.
文摘Radiation detectors, such as survey meters, are essential for ensuring radiation safety in various sectors, including healthcare, industrial processing, emergency response, etc. However, regular calibration and proper maintenance of survey meters are important in order to ascertain their accuracy and reliability. This study provides a comprehensive retrospective assessment of the calibration behaviour, durability, and fault trends of 160 survey meters, spanning ten different models. They were calibrated at the Secondary Standard Dosimetry Laboratory (SSDL) in Nigeria over a decade (2012-2023) using an X-Ray Beam Irradiator Model X80-225K and Cs-137 irradiator (OB6) with a PTW reference spherical chamber traceable to the IAEA SSDL in Seibersdorf, Austria. The calibration stability of each model was evaluated, revealing that models like Instrument A and Instrument B demonstrated high reliability with calibration factors close to the ideal value of 1, while models like Instrument C exhibited higher variability, suggesting less consistent performance for dose rate monitoring. Fault analysis showed that the most common issues were related to the battery compartment, indicating a need for improved handling practices. Correlation analysis reveals no statistically significant correlation between calibration factor and age of survey meter across the analysed models. The study concludes that regular calibration, proper handling, and user training are crucial for maintaining the accuracy and longevity of radiation detectors.
基金supported by the Research on the Reform of Curriculum Assessment Methods for College Mathematics Platform Courses(No.53111104016)。
文摘In various imaging applications such as autonomous vehicles and drones,autofocus lenses are indispensable for capturing clear images.However,conventional camera calibration methods typically rely either on processing multiple images at a fixed focal length or on detecting multi-plane markers in a single image and then applying multi-image calibration models.This paper proposes a flexible and accurate calibration approach that extracts subpixel saddle points from a single image containing three non-coplanar calibration boards.To compute accurate homography matrices for the three boards,outliers are removed by eliminating chessboard points that deviated from the fitted grid lines according to their row and column positions.Initial estimates of the intrinsic parameters and the poses of the three planar chessboards are obtained using the three homography matrices in combination with Zhang’s calibration method.During parameter refinement,a multi-objective optimization function is constructed,incorporating three error terms:(1)Reprojection error of the inlier grid points;(2)Mechanism-driven error derived from the relationship between homography matrices and camera parameters;(3)Cross-planar linearity constraint error,which preserves the pre-imaging collinearity of any five points across different planes after projection.For weight selection in the optimization process,confidence intervals of the detected grid points are analyzed by horizontally rotating the reprojection lines to reduce bias introduced by line slope.The optimal weights are determined by minimizing the number of points whose confidence intervals does not intersect the reprojected lines.When multiple candidates yield similar reprojection performance,the parameter set with the smallest reprojection error is selected as the final result.This method efficiently estimates both intrinsic and extrinsic camera parameters.Simulations and real-world experiments validate the high precision and effectiveness of the proposed approach.Our technique is straightforward,practical,and holds significant theoretical and practical value for rapid and reliable camera calibration.
基金the Knowledge Innovation Program of Basic Re-search Projects of Shenzhen for their support under Grant No.JCYJ20200109142805928the funding provided by the Basic and Applied Basic Research Foundation of Guangdong Provinæunder Grant No.2021A1515220113partially supported by the Guangzhou Municipal Science and Technology Project under Grant 202102010421.
文摘In clinical environments,the prolonged utilization of polarization equipment can result in theaccumulation of errors over extended periods.The absence of expeditious calibration techniques in clinical practice presents a significant obstacle in preserving the precision and dependability of these instruments.To address this challenge,we propose an innovative research study that presents a comprebersive calibration system specifically designed for the calibration of the backscattering Muellet matrix measurement system,enabling swift online calibration acroes various scenarios.This system employs an external calibration framework for rmal-time adjust-ment of the polarizer's initial angle,oversecing the rotation of PSG and PSA motors through position measurement and control procedures,with light intensity monitored by a camera.By incorporating moment um concepts and the Adam optimization algorithm,we enhance conver-gence speed,mitigate noise,and improve calibration accuracy.Experimental results showcase the exceptional precision,speed,and robustness of oрroposed method,achieving high acсuracy and minimal error,thereby offering a promising solution for maintaining the reliabilit y of polarization equipment in clinical settings.
文摘To enhance direction of arrival(DOA)estimation accuracy,this paper proposes a low-cost method for calibrating farfield steering vectors of large aperture millimeter wave radar(mmWR).To this end,we first derive the steering vectors with amplitude and phase errors,assuming that mmWR works in the time-sharing mode.Then,approximate relationship between the near-field calibration steering vector and the far-field calibration steering vector is analyzed,which is used to accomplish the mapping between the two of them.Finally,simulation results verify that the proposed method can effectively improve the angle measurement accuracy of mmWR with existing amplitude and phase errors.
基金supported by the National Natural Science Foundation of China(42276199).
文摘In order to get rid of the dependence on high-precision centrifuges in accelerometer nonlinear coefficients calibration,this paper proposes a system-level calibration method for field condition.Firstly,a 42-dimension Kalman filter is constructed to reduce impact brought by turntable.Then,a biaxial rotation path is designed based on the accelerometer output model,including orthogonal 22 positions and tilt 12 positions,which enhances gravity excitation on nonlinear coefficients of accelerometer.Finally,sampling is carried out for calibration and further experiments.The results of static inertial navigation experiments lasting 4000 s show that compared with the traditional method,the proposed method reduces the position error by about 390 m.
基金General Project of Basic Research Plan for Natural Sciences in Shaanxi Province,grant number 2023-JC-YB-244Youth Project of Basic Research Plan for Natural Sciences in Shaanxi Province,grant number 2024JC-YBQN-0253.
文摘Vector magnetic measurement is increasingly widely used.In order to improve the accuracy of vector magnetic measurement system on board a vehicle,researchers have proposed various calibration methods.Most of them require altering the magnetic vector in the vehicle coordinate system.Exploring the use of geomagnetic variation to change the geomagnetic vector in the vehicle coordinate system,this paper proposes a novel vector magnetic measurement calibration method.In this method,a vector magnetometer mounted on a vehicle and an accurate vector magnetometer separately measure the geomagnetic field at diff erent locations within the same area.Based on the physical principle that the geomagnetic variation at two nearby locations is equal,the calibration parameters of the magnetometer on the vehicle can be determined through a set of equations containing the measurements from the two magnetometers.The theoretical derivation and simulation experiment results demonstrate the feasibility of this method.Therefore,it can serve as a new alternative calibration method,especially in scenarios where a high degree of accuracy in the estimation of calibration parameters is not required.
基金the National Natural Science Foundation of China(No.61927822)。
文摘Traditional calibration method for the digital inclinometer relies on manual inspection,and results in its disadvantages of complicated process,low-efficiency and human errors easy to be introduced.To improve both the calibration accuracy and efficiency of digital inclinometer,an automatic digital inclinometer calibration system was developed in this study,and a new display tube recognition algorithm was proposed.First,a high-precision automatic turntable was taken as the reference to calculate the indication error of the inclinometer.Then,the automatic inclinometer calibration control process and the digital inclinometer zero-setting function were formulated.For display tube recognition,a new display tube recognition algorithm combining threading method and feature extraction method was proposed.Finally,the calibration system was calibrated by photoelectric autocollimator and regular polygon mirror,and the calibration system error and repeatability were calculated via a series of experiments.The experimental results showed that the indication error of the proposed calibration system was less than 4",and the repeatability was 3.9".A digital inclinometer with the resolution of 0.1°was taken as a testing example,within the calibration points'range of[-90°,90°],the repeatability of the testing was 0.085°,and the whole testing process was less than 90 s.The digital inclinometer indication error is mainly introduced by the digital inclinometer resolution according to the uncertainty evaluation.
基金Supported by National Natural Science Foundation of China(Grant Nos.52325501,U24B2047).
文摘Current research on robot calibration can be roughly classified into two categories,and both of them have certain inherent limitations.Model-based methods are difficult to model and compensate the pose errors arising from configuration-dependent geometric and non-geometric source errors,whereas the accuracy of data-driven methods depends on a large amount of measurement data.Using a 5-DOF(degrees of freedom)hybrid machining robot as an exemplar,this study presents a model data-driven approach for the calibration of robotic manipulators.An f-DOF realistic robot containing various source errors is visualized as a 6-DOF fictitious robot having error-free parameters,but erroneous actuated/virtual joint motions.The calibration process essentially involves four steps:(1)formulating the linear map relating the pose error twist to the joint motion errors,(2)parameterizing the joint motion errors using second-order polynomials in terms of nominal actuated joint variables,(3)identifying the polynomial coefficients using the weighted least squares plus principal component analysis,and(4)compensating the compensable pose errors by updating the nominal actuated joint variables.The merit of this approach is that it enables compensation of the pose errors caused by configuration-dependent geometric and non-geometric source errors using finite measurement configurations.Experimental studies on a prototype machine illustrate the effectiveness of the proposed approach.
基金supported by the Fundamental Research Funds for the Central Non-profit Research Institution of CAF(CAFYBB2022ZA001)the National Natural Science Foundation of China(42071065)。
文摘Although Quercus mongolica is a widely distributed,economically and ecologically important deciduous tree in northern China,models to accurately predict stand growth at a regional scale are limited.The physiological process model(3-PG)has the potential to predict stand growth dynamics under varying site conditions and climate change scenarios.Here,we used field inventory,tree ring sampling,and Bayesian calibration to parameterize a model for Q.mongolica.Stand volume and productivity were then predicted under present conditions and three future climate scenarios(RCP26,RCP45 and RCP85).Our results demonstrated that after Bayesian calibration,the posterior ranges of the sensitivity parameters apha Cx,wSx1000 and pRn accounted for 34%,45%and 65%,respectively,of their prior range.Calibration and validation results revealed a strong correlation between predicted and measured values(R^(2)>0.87,P<0.01),with<20%bias for all growth indicators.Stand volume was projected to increase by 145%and productivity by 80%by the year 2100 under the RCP85 scenario,although these projections may vary across regions.The present study developed a tailored set of 3-PG model parameters for Q.mongolica,based on a comprehensive range of climate conditions,stand structure,and age classes.These parameters offer a scientific basis to accurately predict growth of other monospecific oak or mixed-species stands.
