Single-phase,non-isolated microinverters used in photovoltaic(PV)systems commonly encounter two persistent challenges:High-frequency leakage current and fluctuating power delivery.This paper presents a novel single-ph...Single-phase,non-isolated microinverters used in photovoltaic(PV)systems commonly encounter two persistent challenges:High-frequency leakage current and fluctuating power delivery.This paper presents a novel single-phase,non-isolated,multi-input microinverter topology with a common-ground structure that effectively eliminates ground leakage current without requiring additional active components.The proposed microinverter architecture integrates a dual-boost configuration and uses only four active switches.This is especially advantageous in terms of the component count,which is beneficial to enhance reliability,reduce cost,and simplify the overall system design.With one,two,or four PV inputs,it can operate without interruption under unbalanced voltage or partial shading and even if some inputs drop to zero.A tailored modulation scheme minimizes conduction losses while maintaining a stable direct-current(DC)-link voltage,and a decoupling capacitor efficiently absorbs the single-phase pulsating power,thus overcoming one major limitation in existing microinverter designs.By validating with a 1-kW GaN-based prototype,both the simulated and experimental results demonstrate its high efficiency,robustness,and practical suitability for cost-effective PV applications,with a peak efficiency value of 94.8%.展开更多
This study investigates the impact of welding heat input on weldments of modified 9Cr-1Mo(P91)steel,a high-strength material that requires high-energy welding processes like submerged arc welding.In the as-welded cond...This study investigates the impact of welding heat input on weldments of modified 9Cr-1Mo(P91)steel,a high-strength material that requires high-energy welding processes like submerged arc welding.In the as-welded condition,P91 steel welds primarily consist of untempered martensite,which transforms into tempered martensite during post-weld heat treatment(PWHT).Electron spectro-scopy analysis reveals the presence of M_(23)C_(6) and MX carbonitride precipitates at grain boundaries.Increasing the heat input leads to greater quantities of precipitates in the prior austenite grain boundaries,which can affect material properties.Weldment hardness profiles exhibit modest improvements,while ultimate tensile strength and toughness decrease with higher welding heat input,poten-tially due to the formation of a ferritic phase.Residual stress distributions are noticeably influenced by the welding heat input level.展开更多
The Internet of Things(IoT)technology provides data acquisition,transmission,and analysis to control rehabilitation robots,encompassing sensor data from the robots as well as lidar signals for trajectory planning(desi...The Internet of Things(IoT)technology provides data acquisition,transmission,and analysis to control rehabilitation robots,encompassing sensor data from the robots as well as lidar signals for trajectory planning(desired trajectory).In IoT rehabilitation robot systems,managing nonvanishing uncertainties and input quantization is crucial for precise and reliable control performance.These challenges can cause instability and reduced effectiveness,particularly in adaptive networked control.This paper investigates networked control with guaranteed performance for IoT rehabilitation robots under nonvanishing uncertainties and input quantization.First,input quantization is managed via a quantization-aware control design,ensur stability and minimizing tracking errors,even with discrete control inputs,to avoid chattering.Second,the method handles nonvanishing uncertainties by adjusting control parameters via real-time neural network adaptation,maintaining consistent performance despite persistent disturbances.Third,the control scheme guarantees the desired tracking performance within a specified time,with all signals in the closed-loop system remaining uniformly bounded,offering a robust,reliable solution for IoT rehabilitation robot control.The simulation verifies the benefits and efficacy of the proposed control strategy.展开更多
In this paper,Desulfovibrio vulgaris corrosion of X80 steel welded joint with different heat inputs was carefully investigated.The results confirmed that in the sterile medium,general corrosion rate and lo-calized cor...In this paper,Desulfovibrio vulgaris corrosion of X80 steel welded joint with different heat inputs was carefully investigated.The results confirmed that in the sterile medium,general corrosion rate and lo-calized corrosion susceptibility of heat affected zone(HAZ)were higher than those of weld zone(WZ)and base metal(BM).In the inoculated medium,the general corrosion rate of HAZ was still higher than that of WZ and BM.However,the number and depth of corrosion pits on WZ and BM surfaces,as well as the localized corrosion susceptibility,were much higher than those in HAZ,which was opposite to that in sterile environment,suggesting that the Desulfovibrio vulgaris corrosion of the welded joint was selective.With heat input increasing from 0.57 kJ/mm to 1.29 kJ/mm,general corrosion rate and localized corrosion susceptibility of HAZ and WZ simultaneously decreased in sterile or inoculated medium.In in-oculated medium,localized corrosion of HAZ decreased more sharply than weld zone.Within the range of heat inputs tested,the study discerned a positive correlation:higher heat inputs correlated with an enhanced corrosion resistance of welded joint,irrespective of environmental conditions being sterile or inoculated.The findings provide a solid basis for the welding parameter determination to steel pipelines in oil and gas transportation.展开更多
To analyze the correlation between the input energy parameters(V_(E))and typical intensity measures(IMs)of offshore ground motions,based on 273 earthquake events recorded by the K-NET in Japan,892 offshore ground moti...To analyze the correlation between the input energy parameters(V_(E))and typical intensity measures(IMs)of offshore ground motions,based on 273 earthquake events recorded by the K-NET in Japan,892 offshore ground motion records with moment magnitudes from 4.0 to 7.0 were used in this study.Residuals obtained through a ground motion model were calculated and analyzed for the correlation between V_(E) and amplitude,duration,frequency content and cumulative IMs.The results indicate that PGV and PGD have strong correlation with the V_(E)(T>0.2 s and T>0.4 s),the duration IMs have weakly negative correlation with the V_(E),Sd_(1) has a strong correlation with the V_(E) in the periods of T>0.4 s,T_(g) has a weak correlation with V_(E) and the cumulative IMs have strong correlation with the V_(E).The parametric predictive equations between typical IMs and V_(E) was proposed,and the differences between the prediction equations from the onshore ground motion records were compared.The differences in parametric predicted equations between offshore and onshore ground motions were confirmed in this study.Proposed correlation equations can be applied to offshore probabilistic seismic hazard analysis and the selection of ground motion records by generalized conditional intensity measures.展开更多
This paper proposes a novel multivalued recurrent neural network model driven by external inputs,along with two innovative learning algorithms.By incorporating a multivalued activation function,the proposed model can ...This paper proposes a novel multivalued recurrent neural network model driven by external inputs,along with two innovative learning algorithms.By incorporating a multivalued activation function,the proposed model can achieve multivalued many-to-one associative memory,and the newly developed algorithms enable effective storage of many-to-one patterns in the coefficient matrix while maintaining the indispensability of inputs in many-to-one associative memory.The proposed learning algorithm addresses a critical limitation of existing models which fail to ensure completely erroneous outputs when facing partial input missing in many-to-one associative memory tasks.The methodology is rigorously derived through theoretical analysis,incorporating comprehensive verification of both the existence and global exponential stability of equilibrium points.Demonstrative examples are provided in the paper to show the effectiveness of the proposed theory.展开更多
Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncerta...Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncertain systems characterized by unknown control directions and time-varying input delay lacks comprehensive solutions.In this paper,we propose an observerbased adaptive tracking controller to address this gap.Neural networks are utilized to handle uncertainty,and a unique coordinate transformation is employed to untangle the coupling between input delay and unknown control directions.Subsequently,a new auxiliary signal counters the impact of time-varying input delay,while a Nussbaum function is introduced to solve the problem of unknown control directions.The leverage of an advanced dynamic surface control technique avoids the“complexity explosion”and reduces boundary layer errors.Synthesizing these techniques ensures that all the closed-loop signals are semi-globally uniformly ultimately bounded(SGUUB),and the tracking error converges to a small region around the origin by selecting suitable parameters.Simulation examples are provided to demonstrate the feasibility of the proposed approach.展开更多
This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance ...This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance control scheme is proposed,which enables the lateral position error of the vehicle to be kept within the prescribed performance boundaries all the time.This is achieved by firstly introducing an improved performance function into the controller design such that the stringent initial condition requirements can be relaxed,which further allows the global prescribed performance control result,and then,developing a multivariable adaptive terminal sliding mode based controller such that both input saturation and parameter uncertainties are handled effectively,which further ensures the robust lane-keeping control.Finally,the proposed control strategy is validated through numerical simulations,demonstrating its effectiveness.展开更多
The effects of Ti/N ratio on the number densities of nano particles,the size of the prior austenite grain(PAG)and the toughness of the heat-affected zone(HAZ)of Mg-deoxidized steels were studied after high heat input ...The effects of Ti/N ratio on the number densities of nano particles,the size of the prior austenite grain(PAG)and the toughness of the heat-affected zone(HAZ)of Mg-deoxidized steels were studied after high heat input welding of 400 kJ/cm.With increasing the Ti/N ratio from 2.7 to 5.7,the cuboid nano-sized particles are formed,and their number density increases.The area fractions of ductile intragranular acicular ferrites(IAFs)have the highest value and the area fractions of brittle microstructures of ferrite side plates and upper bainites have the lowest value in TN30 steel.With the Ti/N ratio of about 3.0,the HAZ of steel plate has the best low-temperature toughness.With increasing the Ti/N ratio from 2.7 to 5.7,the PAG sizes after the high-temperature laser scanning confocal microscopy observation decrease linearly with increasing the number densities of nano-sized particles.The PAG size of TN30 steel is between 100 and 150μm,which is conducive to the nucleation of IAFs.展开更多
Unknown time-varying periodic disturbances and input delays can degrade control performance and even lead to system instability.This paper presents a novel direct adaptive output feedback controller based on the inter...Unknown time-varying periodic disturbances and input delays can degrade control performance and even lead to system instability.This paper presents a novel direct adaptive output feedback controller based on the internal model principle(IMP)to compensate for the unknown time-varying periodic disturbance in input delay systems.To reduce the design difficulty of the controller,the input delay system is equivalent to an input delay-free system by constructing stable auxiliary systems.Next,all the stabilizing controllers of the input delay system are derived by using the Youla parameterization method.Based on the IMP,an interpolation condition to completely compensate for periodic disturbances is formulated.Then,to compensate for the unknown time-varying periodic disturbance,a parameter adaptive algorithm is designed to update the Q-parameters online.The convergence of adaptive algorithms is analyzed by the Lyapunov function theory.Simulation and experimental results validated the effectiveness of the proposed method.展开更多
This paper investigates the secure impulsive consensus of Lipschitz-type nonlinear multi-agent systems(MASs) with input saturation. According to the coupling of input saturation and denial of service(DoS) attacks, imp...This paper investigates the secure impulsive consensus of Lipschitz-type nonlinear multi-agent systems(MASs) with input saturation. According to the coupling of input saturation and denial of service(DoS) attacks, impulsive control for MASs becomes extremely challenging. Considering general DoS attacks,this paper provides the sufficient conditions for the almost sure consensus of the MASs with input saturation, where the error system can achieve almost sure local exponential stability.Through linear matrix inequalities(LMIs), the relation between the trajectory boundary and DoS attacks is characterized, and the trajectory boundary is estimated. Furthermore, an optimization method of the domain of attraction is proposed to maximize the size. And a non-conservative and practical boundary is proposed to characterize the effect of DoS attacks on MASs. Finally, considering a multi-agent system with typical Chua's circuit dynamic model, an example is provided to illustrate the theorems' correctness.展开更多
Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol ...Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).展开更多
The microstructure and hardness of the stir zone （SZ） with different welding heat inputs were investigated for friction stir-welded 2024-T3 aluminum by transmission electron microscopy, differential scanning calorim...The microstructure and hardness of the stir zone （SZ） with different welding heat inputs were investigated for friction stir-welded 2024-T3 aluminum by transmission electron microscopy, differential scanning calorimeter and Vickers micro-hardness test. The results show that welding heat input has a significant effect on the hardness of the SZ. Under high welding heat input condition, a higher welding speed is beneficial for improving the hardness of the SZ. However, when the welding heat input is low, the hardness of the SZ elevates with increasing the rotation speed. The hardness of the SZ decreases after post-welded heat treatment due to overaging. The joints welded at 500 r/min and 100 mm/min show a high resistance to overaging. The reduction of hardness in the SZ is only 3.8%, while in other joints, the reduction is more than 10%. The morphology of strengthening precipitates plays important roles for the improvement of hardness.展开更多
[Objective] The study aimed to investigate the effects of temperature and nitrogen input on nitrogen mineralization in alpine soils on the Tibetan Plateau.[Method]An incubation experiment in the laboratory was conduct...[Objective] The study aimed to investigate the effects of temperature and nitrogen input on nitrogen mineralization in alpine soils on the Tibetan Plateau.[Method]An incubation experiment in the laboratory was conducted using three alpine soils.These soils were collected from the top 10 cm depth in three grassland types：alpine meadow in Haibei,alpine steppe in Naqu and alpine wetland in Dangxiong.[Result] Temperature significantly affected nitrogen mineralization in alpine soils of three grassland types.The mineralization rate in alpine steppe soil rose with the rise of temperature,while the mineralization rate in the alpine meadow soil and alpine wetland soil decreased with the rise of temperature.Nitrogen input had no significant effect on nitrogen mineralization in the alpine meadow soil,but significantly increased nitrogen mineralization in the alpine steppe soil and the alpine wetland soil.Grassland types significantly affected nitrogen mineralization in alpine grasslands.[Conclusion] The effects of temperature and nitrogen input on nitrogen mineralization in alpine soils on the Tibetan Plateau were significant.And those different effects depended on different types of grassland.展开更多
[Objective] To analyze the input and output in rice cultivation based on CD function. [Method] Based on the input factors, Cobb-Douglas production （CD） function was used to do the quantitative analysis on the input-...[Objective] To analyze the input and output in rice cultivation based on CD function. [Method] Based on the input factors, Cobb-Douglas production （CD） function was used to do the quantitative analysis on the input-output in rice production with rice growers as the objective. [Result] Considering the substitution effect of labor in- put and capital input, under the same technical conditions, the effect of increasing labor input on the rice production in per 667 m2 was negative, based on which 2 pieces of policy suggestions were put forward to promote the transfer of surplus la- bor force of rice growers and ensure the capital supply for rice production. [Conclusion] This study laid the foundation for the realization of reasonable allocation of rice production resources.展开更多
Aiming at gradually developing and perfecting the task-based teaching method, the essay, with enlightment from the Krashen＇s Input Hypothesis, discusses some issues about input, output, activities and teacher＇s role...Aiming at gradually developing and perfecting the task-based teaching method, the essay, with enlightment from the Krashen＇s Input Hypothesis, discusses some issues about input, output, activities and teacher＇s role in this method.展开更多
基金supported by Libyan Cultural Affair/London,Libya under Grant No.13840.
文摘Single-phase,non-isolated microinverters used in photovoltaic(PV)systems commonly encounter two persistent challenges:High-frequency leakage current and fluctuating power delivery.This paper presents a novel single-phase,non-isolated,multi-input microinverter topology with a common-ground structure that effectively eliminates ground leakage current without requiring additional active components.The proposed microinverter architecture integrates a dual-boost configuration and uses only four active switches.This is especially advantageous in terms of the component count,which is beneficial to enhance reliability,reduce cost,and simplify the overall system design.With one,two,or four PV inputs,it can operate without interruption under unbalanced voltage or partial shading and even if some inputs drop to zero.A tailored modulation scheme minimizes conduction losses while maintaining a stable direct-current(DC)-link voltage,and a decoupling capacitor efficiently absorbs the single-phase pulsating power,thus overcoming one major limitation in existing microinverter designs.By validating with a 1-kW GaN-based prototype,both the simulated and experimental results demonstrate its high efficiency,robustness,and practical suitability for cost-effective PV applications,with a peak efficiency value of 94.8%.
文摘This study investigates the impact of welding heat input on weldments of modified 9Cr-1Mo(P91)steel,a high-strength material that requires high-energy welding processes like submerged arc welding.In the as-welded condition,P91 steel welds primarily consist of untempered martensite,which transforms into tempered martensite during post-weld heat treatment(PWHT).Electron spectro-scopy analysis reveals the presence of M_(23)C_(6) and MX carbonitride precipitates at grain boundaries.Increasing the heat input leads to greater quantities of precipitates in the prior austenite grain boundaries,which can affect material properties.Weldment hardness profiles exhibit modest improvements,while ultimate tensile strength and toughness decrease with higher welding heat input,poten-tially due to the formation of a ferritic phase.Residual stress distributions are noticeably influenced by the welding heat input level.
基金supported in part by the National Natural Science Foundation of China under Grant 62302475in part by the Research Funds of Centre for Leading Medicine and Advanced Technologies of IHM under Grant 2023IHM01081 and 2023IHM01085+1 种基金in part by the Hefei Municipal Natural Science Foundation under Grant 202328partly by the Anhui Science and Technology Innovation Tackling Plan Project under Grant 202423k09020044。
文摘The Internet of Things(IoT)technology provides data acquisition,transmission,and analysis to control rehabilitation robots,encompassing sensor data from the robots as well as lidar signals for trajectory planning(desired trajectory).In IoT rehabilitation robot systems,managing nonvanishing uncertainties and input quantization is crucial for precise and reliable control performance.These challenges can cause instability and reduced effectiveness,particularly in adaptive networked control.This paper investigates networked control with guaranteed performance for IoT rehabilitation robots under nonvanishing uncertainties and input quantization.First,input quantization is managed via a quantization-aware control design,ensur stability and minimizing tracking errors,even with discrete control inputs,to avoid chattering.Second,the method handles nonvanishing uncertainties by adjusting control parameters via real-time neural network adaptation,maintaining consistent performance despite persistent disturbances.Third,the control scheme guarantees the desired tracking performance within a specified time,with all signals in the closed-loop system remaining uniformly bounded,offering a robust,reliable solution for IoT rehabilitation robot control.The simulation verifies the benefits and efficacy of the proposed control strategy.
基金supported by the National Natural Science Foundation of China(Nos.52471096 and 51971191).
文摘In this paper,Desulfovibrio vulgaris corrosion of X80 steel welded joint with different heat inputs was carefully investigated.The results confirmed that in the sterile medium,general corrosion rate and lo-calized corrosion susceptibility of heat affected zone(HAZ)were higher than those of weld zone(WZ)and base metal(BM).In the inoculated medium,the general corrosion rate of HAZ was still higher than that of WZ and BM.However,the number and depth of corrosion pits on WZ and BM surfaces,as well as the localized corrosion susceptibility,were much higher than those in HAZ,which was opposite to that in sterile environment,suggesting that the Desulfovibrio vulgaris corrosion of the welded joint was selective.With heat input increasing from 0.57 kJ/mm to 1.29 kJ/mm,general corrosion rate and localized corrosion susceptibility of HAZ and WZ simultaneously decreased in sterile or inoculated medium.In in-oculated medium,localized corrosion of HAZ decreased more sharply than weld zone.Within the range of heat inputs tested,the study discerned a positive correlation:higher heat inputs correlated with an enhanced corrosion resistance of welded joint,irrespective of environmental conditions being sterile or inoculated.The findings provide a solid basis for the welding parameter determination to steel pipelines in oil and gas transportation.
基金National Natural Science Foundation of China under Grant No.52478568National Key R&D Program of China under Grant Nos.2021YFC3100701 and 2022YFC3003503the Nature Science Foundation of Hubei Province under Grant No.2023AFA030。
文摘To analyze the correlation between the input energy parameters(V_(E))and typical intensity measures(IMs)of offshore ground motions,based on 273 earthquake events recorded by the K-NET in Japan,892 offshore ground motion records with moment magnitudes from 4.0 to 7.0 were used in this study.Residuals obtained through a ground motion model were calculated and analyzed for the correlation between V_(E) and amplitude,duration,frequency content and cumulative IMs.The results indicate that PGV and PGD have strong correlation with the V_(E)(T>0.2 s and T>0.4 s),the duration IMs have weakly negative correlation with the V_(E),Sd_(1) has a strong correlation with the V_(E) in the periods of T>0.4 s,T_(g) has a weak correlation with V_(E) and the cumulative IMs have strong correlation with the V_(E).The parametric predictive equations between typical IMs and V_(E) was proposed,and the differences between the prediction equations from the onshore ground motion records were compared.The differences in parametric predicted equations between offshore and onshore ground motions were confirmed in this study.Proposed correlation equations can be applied to offshore probabilistic seismic hazard analysis and the selection of ground motion records by generalized conditional intensity measures.
基金supported by the National Natural Science Foundation of China(Grant Nos.62376105,12101208,and 61906072)the Fundamental Research Funds for the Central Universities(Grant No.2662022XXQD001).
文摘This paper proposes a novel multivalued recurrent neural network model driven by external inputs,along with two innovative learning algorithms.By incorporating a multivalued activation function,the proposed model can achieve multivalued many-to-one associative memory,and the newly developed algorithms enable effective storage of many-to-one patterns in the coefficient matrix while maintaining the indispensability of inputs in many-to-one associative memory.The proposed learning algorithm addresses a critical limitation of existing models which fail to ensure completely erroneous outputs when facing partial input missing in many-to-one associative memory tasks.The methodology is rigorously derived through theoretical analysis,incorporating comprehensive verification of both the existence and global exponential stability of equilibrium points.Demonstrative examples are provided in the paper to show the effectiveness of the proposed theory.
基金National Natural Science Foundation of China(62373102)Jiangsu Natural Science Foundation(BK20221455)Anhui Provincial Key Research and Development Project(2022i01020013)。
文摘Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncertain systems characterized by unknown control directions and time-varying input delay lacks comprehensive solutions.In this paper,we propose an observerbased adaptive tracking controller to address this gap.Neural networks are utilized to handle uncertainty,and a unique coordinate transformation is employed to untangle the coupling between input delay and unknown control directions.Subsequently,a new auxiliary signal counters the impact of time-varying input delay,while a Nussbaum function is introduced to solve the problem of unknown control directions.The leverage of an advanced dynamic surface control technique avoids the“complexity explosion”and reduces boundary layer errors.Synthesizing these techniques ensures that all the closed-loop signals are semi-globally uniformly ultimately bounded(SGUUB),and the tracking error converges to a small region around the origin by selecting suitable parameters.Simulation examples are provided to demonstrate the feasibility of the proposed approach.
基金supported in part by the National Key Research and Development Program of China under Grant 2023YFA1011803in part by Natural Science Foundation of Chongqing,China under Grant CSTB2023NSCQ-MSX0588+2 种基金in part by the Fundamental Research Funds for the Central Universities,China under Grant 2023CDJKYJH047in part by the National Natural Science Foundation of China under Grant 62273064,Grant 61991400,Grant 61991403,Grant 61933012,Grant 62250710167,Grant 62203078in part by Innovation Support Program for International Students Returning to China under Grant cx2022016.
文摘This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance control scheme is proposed,which enables the lateral position error of the vehicle to be kept within the prescribed performance boundaries all the time.This is achieved by firstly introducing an improved performance function into the controller design such that the stringent initial condition requirements can be relaxed,which further allows the global prescribed performance control result,and then,developing a multivariable adaptive terminal sliding mode based controller such that both input saturation and parameter uncertainties are handled effectively,which further ensures the robust lane-keeping control.Finally,the proposed control strategy is validated through numerical simulations,demonstrating its effectiveness.
基金financially supported by the National Natural Science Foundation of China(52474361).
文摘The effects of Ti/N ratio on the number densities of nano particles,the size of the prior austenite grain(PAG)and the toughness of the heat-affected zone(HAZ)of Mg-deoxidized steels were studied after high heat input welding of 400 kJ/cm.With increasing the Ti/N ratio from 2.7 to 5.7,the cuboid nano-sized particles are formed,and their number density increases.The area fractions of ductile intragranular acicular ferrites(IAFs)have the highest value and the area fractions of brittle microstructures of ferrite side plates and upper bainites have the lowest value in TN30 steel.With the Ti/N ratio of about 3.0,the HAZ of steel plate has the best low-temperature toughness.With increasing the Ti/N ratio from 2.7 to 5.7,the PAG sizes after the high-temperature laser scanning confocal microscopy observation decrease linearly with increasing the number densities of nano-sized particles.The PAG size of TN30 steel is between 100 and 150μm,which is conducive to the nucleation of IAFs.
基金supported in part by the National Natural Science Foundation of China(62325302,62203076,62103065,62033001,62303079)the China Postdoctoral Science Foundation(2021M700584)+1 种基金the Natural Science Foundation of Chongqing,China(cstc2020jcyj-zdxmX0014)the Program of Shanghai Academic/Technology Research Leader(21XD1421400).
文摘Unknown time-varying periodic disturbances and input delays can degrade control performance and even lead to system instability.This paper presents a novel direct adaptive output feedback controller based on the internal model principle(IMP)to compensate for the unknown time-varying periodic disturbance in input delay systems.To reduce the design difficulty of the controller,the input delay system is equivalent to an input delay-free system by constructing stable auxiliary systems.Next,all the stabilizing controllers of the input delay system are derived by using the Youla parameterization method.Based on the IMP,an interpolation condition to completely compensate for periodic disturbances is formulated.Then,to compensate for the unknown time-varying periodic disturbance,a parameter adaptive algorithm is designed to update the Q-parameters online.The convergence of adaptive algorithms is analyzed by the Lyapunov function theory.Simulation and experimental results validated the effectiveness of the proposed method.
基金supported by the National Natural Science Foundation of China(62373302,62333009)
文摘This paper investigates the secure impulsive consensus of Lipschitz-type nonlinear multi-agent systems(MASs) with input saturation. According to the coupling of input saturation and denial of service(DoS) attacks, impulsive control for MASs becomes extremely challenging. Considering general DoS attacks,this paper provides the sufficient conditions for the almost sure consensus of the MASs with input saturation, where the error system can achieve almost sure local exponential stability.Through linear matrix inequalities(LMIs), the relation between the trajectory boundary and DoS attacks is characterized, and the trajectory boundary is estimated. Furthermore, an optimization method of the domain of attraction is proposed to maximize the size. And a non-conservative and practical boundary is proposed to characterize the effect of DoS attacks on MASs. Finally, considering a multi-agent system with typical Chua's circuit dynamic model, an example is provided to illustrate the theorems' correctness.
基金supported by the National Nature Science Foundation of China(U21A20166)the Science and Technology Development Foundation of Jilin Province(20230508095RC)+2 种基金the Major Science and Technology Projects of Jilin Province and Changchun City(20220301033GX)the Development and Reform Commission Foundation of Jilin Province(2023C034-3)the Interdisciplinary Integration and Innovation Project of JLU(JLUXKJC2020202).
文摘Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).
基金Project(61901110301)supported by the Aircraft Science Foundation,China
文摘The microstructure and hardness of the stir zone （SZ） with different welding heat inputs were investigated for friction stir-welded 2024-T3 aluminum by transmission electron microscopy, differential scanning calorimeter and Vickers micro-hardness test. The results show that welding heat input has a significant effect on the hardness of the SZ. Under high welding heat input condition, a higher welding speed is beneficial for improving the hardness of the SZ. However, when the welding heat input is low, the hardness of the SZ elevates with increasing the rotation speed. The hardness of the SZ decreases after post-welded heat treatment due to overaging. The joints welded at 500 r/min and 100 mm/min show a high resistance to overaging. The reduction of hardness in the SZ is only 3.8%, while in other joints, the reduction is more than 10%. The morphology of strengthening precipitates plays important roles for the improvement of hardness.
基金Supported by Young Talents Project of Chinese Academy of Sciences (KZCX2-YW-QN302)the National Natural Science Found ofChina (41071209,30870424)~~
文摘[Objective] The study aimed to investigate the effects of temperature and nitrogen input on nitrogen mineralization in alpine soils on the Tibetan Plateau.[Method]An incubation experiment in the laboratory was conducted using three alpine soils.These soils were collected from the top 10 cm depth in three grassland types：alpine meadow in Haibei,alpine steppe in Naqu and alpine wetland in Dangxiong.[Result] Temperature significantly affected nitrogen mineralization in alpine soils of three grassland types.The mineralization rate in alpine steppe soil rose with the rise of temperature,while the mineralization rate in the alpine meadow soil and alpine wetland soil decreased with the rise of temperature.Nitrogen input had no significant effect on nitrogen mineralization in the alpine meadow soil,but significantly increased nitrogen mineralization in the alpine steppe soil and the alpine wetland soil.Grassland types significantly affected nitrogen mineralization in alpine grasslands.[Conclusion] The effects of temperature and nitrogen input on nitrogen mineralization in alpine soils on the Tibetan Plateau were significant.And those different effects depended on different types of grassland.
基金Supported by the Philosophy and Social Science Foundation of Hunan Province,China(2010YBA012)~~
文摘[Objective] To analyze the input and output in rice cultivation based on CD function. [Method] Based on the input factors, Cobb-Douglas production （CD） function was used to do the quantitative analysis on the input-output in rice production with rice growers as the objective. [Result] Considering the substitution effect of labor in- put and capital input, under the same technical conditions, the effect of increasing labor input on the rice production in per 667 m2 was negative, based on which 2 pieces of policy suggestions were put forward to promote the transfer of surplus la- bor force of rice growers and ensure the capital supply for rice production. [Conclusion] This study laid the foundation for the realization of reasonable allocation of rice production resources.
文摘Aiming at gradually developing and perfecting the task-based teaching method, the essay, with enlightment from the Krashen＇s Input Hypothesis, discusses some issues about input, output, activities and teacher＇s role in this method.
