The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope ...The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope and image processing technology were employed to achieve a quantitative grain size distribution of NiTi alloys so as to provide experimental data for molecular dynamics modeling at the atomic scale.Considering the size effect of molecular dynamics model on material properties,a reasonable modeling size was provided by taking into account three characteristic dimensions from the perspective of macro,meso,and micro scales according to the Buckinghamπtheorem.Then,the corresponding MD simulation on deformation and fracture behavior was investigated to derive a parameterized traction-separation(T-S)law,and then it was embedded into cohesive elements of finite element software.Thus,the crack propagation behavior in NiTi alloys was reproduced by the finite element method(FEM).The experimental results show that the predicted initiation fracture toughness is in good agreement with experimental data.In addition,it is found that the dynamics initiation fracture toughness increases with decreasing grain size and increasing loading velocity.展开更多
The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）...The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）. RAMS and FLUENT are combined as a multi-scale numerical modeling system, in which the RAMS simulated data are delivered to the computational model for FLUENT simulation in an offline way. Numerical simulations are performed to present and preliminarily validate the capability of the multi-scale modeling system, and the results show that the modeling system can reasonably provide information on the meteorological elements in an urban area from the urban scale to the city-block scale, especially the details of the turbulent flows within the USL.展开更多
It is one concern of the researchers how magnesium(Mg)alloys solidify under different conditions and how their microstructure evolves during solidification,and what are the relationship between the macroscopic propert...It is one concern of the researchers how magnesium(Mg)alloys solidify under different conditions and how their microstructure evolves during solidification,and what are the relationship between the macroscopic properties and various microstructures.Such issues are difficult to be revealed through experiments only,especially for the newly developed Mg alloys,for which there is a lack of more systematic and mature system.However,multi-scale modeling and simulation can promote and deepen our understanding of the microstructure and its deformation mechanism.In this paper,we review and summarize the recent research progress of numerical simulation of Mg alloys in forming and microstructure,namely casting,extrusion,rolling,and welding,using crystal plasticity finite element(CPFEM)and molecular dynamics(DM)methods.Besides,the methods and innovations of modeling are also summarized.Lastly,the paper discusses the development prospects and challenges of the numerical simulation in the field of Mg alloys.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Ice crystal icing is an important cause of accidents in aircraft engines.Ice formation in aircraft engines can cause internal blades to freeze,affecting the quality of the air flow field and blocking the flow path.On ...Ice crystal icing is an important cause of accidents in aircraft engines.Ice formation in aircraft engines can cause internal blades to freeze,affecting the quality of the air flow field and blocking the flow path.On the other hand,the entry of ice crystal particles into the combustion chamber can cause a decrease in temperature or even flameout,leading to engine surge or shutdown.Therefore,it is necessary to conduct multiphase flow tests on ice crystals for aircraft components such as aircraft engines.Conducting ice crystal multiphase flow tests on aircraft is an effective research method,but it requires the construction of an ice crystal multiphase flow test platform that meets relevant technical requirements.The paper focuses on the relevant experimental requirements and combines wind tunnel test structures to conduct multiphase flow numerical simulations on various forms of jet pipelines,obtaining particle motion distribution results.After comparison,the optimal form of jet structure is obtained,providing the best selection scheme for the design of relevant wind tunnel structures.展开更多
Regenerative catalytic oxidizers(RCO)are widely used to remove volatile organic compounds(VOCs)due to their energy-saving and stability.In this study,a multi-component catalytic reaction model was constructed to numer...Regenerative catalytic oxidizers(RCO)are widely used to remove volatile organic compounds(VOCs)due to their energy-saving and stability.In this study,a multi-component catalytic reaction model was constructed to numerically investigate the reaction process of hydrocarbon-containing VOCs in RCO using computational fluid dynamics(CFD)simulation.To obtain the conversion characteristics of multi-component hydrocarbons,the effects of intake load,equivalence ratio,and the composition of multi-component hydrocarbons on the flow,heat transfer,and conversion rate of the reactor were analyzed.A feasibility study plan targeting the hard-to-convert components was also proposed.The results indicated that as the load increases,the conversion rates of the various components decrease,while the reaction rates increase.Moreover,increasing the flow velocity intensifies turbulence and enhances the collision frequency between the gas and the wall surfaces.This,in turn,amplifies the resistance effect of the porous medium.As the equivalence ratio of VOCs to oxygen increases,the oxygen-deficient condition leads to a decrease in the molecular weight of the hydrocarbons involved in the reaction.The reaction temperature also shows a downward trend.A comparative analysis of the catalytic combustion characteristics of multi-component VOCs and single-component gases reveals that adding ethane and propane can facilitate methane oxidation.展开更多
Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagati...Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers of...Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers offer advantages such as reduced material usage,lower refrigerant charge,and compact structure.However,they also face challenges,including increased refrigerant pressure drop and smaller heat transfer area inside the tubes.This paper combines the advantages and disadvantages of both small and large-diameter tubes and proposes a combined-diameter heat exchanger,consisting of large and small diameters,for use in the indoor units of split-type air conditioners.There are relatively few studies in this area.In this paper,A theoretical and numerical computation method is employed to establish a theoretical-numerical calculation model,and its reliability is verified through experiments.Using this model,the optimal combined diameters and flow path design for a combined-diameter heat exchanger using R32 as the working fluid are derived.The results show that the heat transfer performance of all combined diameter configurations improves by 2.79%to 8.26%compared to the baseline design,with the coefficient of performance(COP)increasing from 4.15 to 4.27~4.5.These designs can save copper material,but at the cost of an increase in pressure drop by 66.86%to 131.84%.The scheme IIIH,using R32,is the optimal combined-diameter and flow path configuration that balances both heat transfer performance and economic cost.展开更多
Geological CO_(2) storage is a promising strategy for reducing greenhouse gas emissions and has become a growing focus of research and deployment.This paper presents numerical simulations of CO_(2) injection and stora...Geological CO_(2) storage is a promising strategy for reducing greenhouse gas emissions and has become a growing focus of research and deployment.This paper presents numerical simulations of CO_(2) injection and storage in a depleted gas reservoir within the B Depression and evaluates associated CO_(2) trapping mechanisms.In the base case,a constant injection rate of 3500 m^(3)/d over fifteen years resulted in a cumulative injection of 19.2×10^(6) m^(3).The CO_(2) plume expanded radially during injection and subsequently migrated up-dip under buoyancy forces.The final stored mass of CO_(2) in the reservoir was 10.6 million tonnes(Mt),representing less than 10% of its theoretical capacity.The plume was projected to reach the entrapment crest and the top of the reservoir within a century,indicating secure long-term containment.Structural,stratigraphic,and residual trapping dominate in Reservoir A(approximately 90%).Anticlinal closures with thick overlying mudstones in the Zhujiang Formation provide effective seals,further enhancing storage security.Reservoir properties and heterogeneity play a crucial role in controlling CO_(2) storage.However,reservoir heterogeneity exerts only a limited influence when intrinsic properties are favorable.Overall,the study and implementation of CO_(2) capture,utilization,and storage(CCUS)in China's offshore basins show promising prospects.展开更多
Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteri...Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteristics and flow field evolution laws of overlapping rotor configurations in hovering conditions through numerical simulation methods.The research method involves constructing a computational model for rotor flow fields and aerodynamic characteristics based on the Reynolds-averaged Navier-Stokes(RANS)equations and the Spalart-Allmaras(S-A)turbulence model.The dynamic simulation of rotor rotational motion was achieved by using the moving nested grid technology.The reliability of the computational method was ensured through the grid independence verification and the comparison with experimental data.The research results indicate that in overlapping rotor systems,rotorⅡexperiences a decrease in thrust,significant power fluctuations,and reduced hovering efficiency due to continuous interference from the adjacent rotor’s wake and blade-vortex interactions.Blade-tip vortices undergo breakage,fusion,and secondary rolling in the overlapping region,forming large-scale turbulent structures that lead to attenuation of the induced velocity field and aerodynamic efficiency losses.Additionally,the interaction between the rotor downwash and the fuselage triggers a“fountain effect”and a sudden increase in surface pressure on the fuselage,exacerbating flow field distortion.Based on the aforementioned mechanisms,the safe flight of overlapping rotor configurations can be achieved by optimizing the configuration strategy of the rotational speed phase difference between adjacent blades.This study provides a theoretical basis for the rotor layout design and the aerodynamic performance enhancement of heavy-load eVTOL aircraft.展开更多
In the past few decades,multi-scale numerical methods have been developed to model dense gas-solidflow in fluidized beds with different resolutions,accuracies,and efficiencies.However,ambiguity needsto be clarified in...In the past few decades,multi-scale numerical methods have been developed to model dense gas-solidflow in fluidized beds with different resolutions,accuracies,and efficiencies.However,ambiguity needsto be clarified in the multi-scale numerical simulation of fluidized beds:(i)the selection of the submodels,parameters,and numerical resolution;(ii)the multivariate coupling of operating conditions,bed configurations,polydispersity,and additional forces.Accordingly,a state-of-the-art review is performed to assess the applicability of multi-scale numerical methods in predicting dense gas-solid flow influidized beds at specific fluidization regimes(e.g.,bubbling fluidization region,fast fluidization regime),with a focus on the inter-particle collision models,inter-phase interaction models,collision parameters,and polydispersity effect.A mutual restriction exists between resolution and efficiency.Higherresolution methods need more computational resources and thus are suitable for smaller-scale simulations to provide a database for closure development.Lower-resolution methods require fewercomputational resources and thus underpin large-scale simulations to explore macro-scale phenomena.Model validations need to be further conducted under multiple flow conditions and comprehensivemetrics(e.g.,velocity profiles at different heights,bubbles,or cluster characteristics)for furtherimprovement of the applicability of each numerical method.展开更多
Dense gas-solid flows are very common in actual production and industrial fields,so it is significant to understand their hydrodynamic characteristics and heat and mass transfer behaviors.This article provides a brief...Dense gas-solid flows are very common in actual production and industrial fields,so it is significant to understand their hydrodynamic characteristics and heat and mass transfer behaviors.This article provides a brief review of multi-scale numerical simulation of flow,heat and mass transfer behaviors in dense gas-solid flows.It describes multiscale models(direct numerical simulation,discrete particle model,and two-fluid model)and the results of related research.Finally,it discusses possible future developments in research on the flow,heat and mass transfer characteristics of dense gas-solid two-phase flows.展开更多
Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer ...Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.展开更多
Hydrogen displays the potential to partially replace pulverized coal injection(PCI)in the blast furnace,and it can reduce CO_(2)emissions.In this paper,a three-dimensional mathematical model of hydrogen and pulverized...Hydrogen displays the potential to partially replace pulverized coal injection(PCI)in the blast furnace,and it can reduce CO_(2)emissions.In this paper,a three-dimensional mathematical model of hydrogen and pulverized coal co-injection in blast furnace tuyere was established through numerical simulation,and the effect of hydrogen injection and oxygen enrichment interaction on pulverized coal combustion and raceway smelting was investigated.The simulation results indicate that when the coal injection rate decreased from 36 to 30t/h and the hydrogen injection increased from 0 to 3600 m^(3)/h,the CO_(2)emissions decreased from 1860 to 1551 kg/t,which represents a16.6%reduction,and the pulverized coal burnout decreased from 70.1%to 63.7%.The heat released from hydrogen combustion can not only promote the volatilization of pulverized coal but also affect the combustion reaction between volatilization and oxygen,which resulted in a decrease in the temperature at the end of the raceway.Co-injection of hydrogen with PCI increased the wall temperature near the upper half part of the raceway and at the outlet of the tuyere,which required a high cooling efficiency to extend the service life of the blast furnace.The increase in oxygen level compensated for the decreased average temperature in the raceway due to hydrogen injection.The increase in the oxygen content by 3%while maintaining constant hydrogen and PCI injection rates increased the burnout and average raceway temperature by 4.2%and 43 K,respectively.The mole fraction of CO and H_(2) production increased by 0.04 and 0.02,respectively.Burnout can be improved through optimization of the particle size distribution of pulverized coal.展开更多
Deeply buried mountain tunnels are often exposed to the risk of rock bursts,which always cause serious damage to the supporting structures and threaten the safety of the engineers.Due to the limited data available,a s...Deeply buried mountain tunnels are often exposed to the risk of rock bursts,which always cause serious damage to the supporting structures and threaten the safety of the engineers.Due to the limited data available,a suitable approach to predict the rockburst tendency at the preliminary stage becomes very important.In this study,an integrated methodology combining 3D initial stress inversion and rockburst tendency prediction was developed and subsequently applied to a case study of the Sangzhuling Tunnel on the Sichuan–Tibet Railway.The numerical modelling involved inverting the initial stress field using a multiple linear regression method.The tunnel excavation was simulated separately by FDM and DEM,based on a stress boundary condition from the inverted stress field.The comparative analysis demonstrates that the rockburst ratio calculated using DEM(76.70%)exhibits a slight increase compared to FDM(75.38%),and the rockburst location is consistent with the actual situation.This suggests that DEM is more suitable for simulating the stress redistribution during excavation in a jointed rock mass.The numerical simulation combined with the deviatoric stress approach effectively predicts rockburst tendency,meeting the engineering requirements.Despite its limitations,numerical simulation remains a reliable method for predicting rock bursts.展开更多
Bedding parallel stepped rock slopes exist widely in nature and are used in slope engineering.They are characterized by complex topography and geological structure and are vulnerable to shattering under strong earthqu...Bedding parallel stepped rock slopes exist widely in nature and are used in slope engineering.They are characterized by complex topography and geological structure and are vulnerable to shattering under strong earthquakes.However,no previous studies have assessed the mechanisms underlying seismic failure in rock slopes.In this study,large-scale shaking table tests and numerical simulations were conducted to delineate the seismic failure mechanism in terms of acceleration,displacement,and earth pressure responses combined with shattering failure phenomena.The results reveal that acceleration response mutations usually occur within weak interlayers owing to their inferior performance,and these mutations may transform into potential sliding surfaces,thereby intensifying the nonlinear seismic response characteristics.Cumulative permanent displacements at the internal corners of the berms can induce quasi-rigid displacements at the external corners,leading to greater permanent displacements at the internal corners.Therefore,the internal corners are identified as the most susceptible parts of the slope.In addition,the concept of baseline offset was utilized to explain the mechanism of earth pressure responses,and the result indicates that residual earth pressures at the internal corners play a dominant role in causing deformation or shattering damage.Four evolutionary deformation phases characterize the processes of seismic responses and shattering failure of the bedding parallel stepped rock slope,i.e.the formation of tensile cracks at the internal corners of the berm,expansion of tensile cracks and bedding surface dislocation,development of vertical tensile cracks at the rear edge,and rock mass slipping leading to slope instability.Overall,this study provides a scientific basis for the seismic design of engineering slopes and offers valuable insights for further studies on preventing seismic disasters in bedding parallel stepped rock slopes.展开更多
The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to ...The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.展开更多
A suction casting experiment was conducted on Zr_(55)Cu_(30)Al_(10)Ni_(5)(at%)amorphous alloy.Using ProCAST software,numerical simulations were performed to analyze the filling and solidification processes.The velocit...A suction casting experiment was conducted on Zr_(55)Cu_(30)Al_(10)Ni_(5)(at%)amorphous alloy.Using ProCAST software,numerical simulations were performed to analyze the filling and solidification processes.The velocity field during the filling process and the temperature field during the solidification process of the alloy melt under different process parameters were obtained.Based on the simulation results,a Zr-based amorphous alloy micro-gear was prepared via casting.The results indicate that increasing the suction casting temperature enhances the fluidity of alloy melt but induces unstable flow rate during filling,which is detrimental to complete filling.Zr-based amorphous micro-gears with a module of 0.6 mm,a tooth top diameter of 8 mm,and 10 teeth were prepared through the suction casting.X-ray diffraction and differential scanning calorimetry analyses confirm that the fabricated micro-gear exhibits characteristic amorphous structural features,demonstrating well-defined geometrical contours and satisfactory forming completeness.展开更多
To further reduce the explosive thickness and to improve the bonding quality of titanium/steel composite plates,explosive welding experiments of TA1/Q235 were conducted using a low detonation velocity explosive(53#)un...To further reduce the explosive thickness and to improve the bonding quality of titanium/steel composite plates,explosive welding experiments of TA1/Q235 were conducted using a low detonation velocity explosive(53#)under the guidance of the explosive welding lower limit principle with the flyer plate thicknesses of 1,2,and 4 mm and gaps of 3,6,and 8 mm.The weldability window for titanium/steel explosive welding was calculated,and a quantitative relationship between dynamic and static process parameters was developed.Aβ-V_(p) high-speed inclined collision model was proposed,and two-dimensional numerical simulations for the explosive welding tests were performed using the smoothed particle hydrodynamics(SPH)algorithm,revealing the growth evolution mechanisms of the typical waveform morphology characteristics.Through microstructural characterization techniques,such as optical microscope,scanning electron microscope,energy dispersive spectrometer,and electron backscattered diffractometer,and mechanical property tests in terms of shear strength,bending performance,and impact toughness,the microstructure and mechanical properties of the interfaces of explosively welded TA1/Q235 composite plates were investigated.Results show that the quality of interface bonding is excellent,presenting typical waveform morphology with an average interface shear strength above 330 MPa and an average impact toughness exceeding 81 J.All samples can be bent to 180°without significant delamination or cracking defects.展开更多
基金Funded by the National Natural Science Foundation of China Academy of Engineering Physics and Jointly Setup"NSAF"Joint Fund(No.U1430119)。
文摘The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope and image processing technology were employed to achieve a quantitative grain size distribution of NiTi alloys so as to provide experimental data for molecular dynamics modeling at the atomic scale.Considering the size effect of molecular dynamics model on material properties,a reasonable modeling size was provided by taking into account three characteristic dimensions from the perspective of macro,meso,and micro scales according to the Buckinghamπtheorem.Then,the corresponding MD simulation on deformation and fracture behavior was investigated to derive a parameterized traction-separation(T-S)law,and then it was embedded into cohesive elements of finite element software.Thus,the crack propagation behavior in NiTi alloys was reproduced by the finite element method(FEM).The experimental results show that the predicted initiation fracture toughness is in good agreement with experimental data.In addition,it is found that the dynamics initiation fracture toughness increases with decreasing grain size and increasing loading velocity.
基金This study was supported by the National Natural Science Foundation of China （Grant Nos. 40233030, 40405004, 40405014）.
文摘The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）. RAMS and FLUENT are combined as a multi-scale numerical modeling system, in which the RAMS simulated data are delivered to the computational model for FLUENT simulation in an offline way. Numerical simulations are performed to present and preliminarily validate the capability of the multi-scale modeling system, and the results show that the modeling system can reasonably provide information on the meteorological elements in an urban area from the urban scale to the city-block scale, especially the details of the turbulent flows within the USL.
基金supported by the National Natural Science Foundation of China(No.52271091)Natural Science Foundation Project of Ningxia Province(No.2023AAC03324)the National Key Research and Development Program of China(No.2021YFB3701100).
文摘It is one concern of the researchers how magnesium(Mg)alloys solidify under different conditions and how their microstructure evolves during solidification,and what are the relationship between the macroscopic properties and various microstructures.Such issues are difficult to be revealed through experiments only,especially for the newly developed Mg alloys,for which there is a lack of more systematic and mature system.However,multi-scale modeling and simulation can promote and deepen our understanding of the microstructure and its deformation mechanism.In this paper,we review and summarize the recent research progress of numerical simulation of Mg alloys in forming and microstructure,namely casting,extrusion,rolling,and welding,using crystal plasticity finite element(CPFEM)and molecular dynamics(DM)methods.Besides,the methods and innovations of modeling are also summarized.Lastly,the paper discusses the development prospects and challenges of the numerical simulation in the field of Mg alloys.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Ice crystal icing is an important cause of accidents in aircraft engines.Ice formation in aircraft engines can cause internal blades to freeze,affecting the quality of the air flow field and blocking the flow path.On the other hand,the entry of ice crystal particles into the combustion chamber can cause a decrease in temperature or even flameout,leading to engine surge or shutdown.Therefore,it is necessary to conduct multiphase flow tests on ice crystals for aircraft components such as aircraft engines.Conducting ice crystal multiphase flow tests on aircraft is an effective research method,but it requires the construction of an ice crystal multiphase flow test platform that meets relevant technical requirements.The paper focuses on the relevant experimental requirements and combines wind tunnel test structures to conduct multiphase flow numerical simulations on various forms of jet pipelines,obtaining particle motion distribution results.After comparison,the optimal form of jet structure is obtained,providing the best selection scheme for the design of relevant wind tunnel structures.
基金supported by National Key Research&Development Program of China(2022YFB4101500).
文摘Regenerative catalytic oxidizers(RCO)are widely used to remove volatile organic compounds(VOCs)due to their energy-saving and stability.In this study,a multi-component catalytic reaction model was constructed to numerically investigate the reaction process of hydrocarbon-containing VOCs in RCO using computational fluid dynamics(CFD)simulation.To obtain the conversion characteristics of multi-component hydrocarbons,the effects of intake load,equivalence ratio,and the composition of multi-component hydrocarbons on the flow,heat transfer,and conversion rate of the reactor were analyzed.A feasibility study plan targeting the hard-to-convert components was also proposed.The results indicated that as the load increases,the conversion rates of the various components decrease,while the reaction rates increase.Moreover,increasing the flow velocity intensifies turbulence and enhances the collision frequency between the gas and the wall surfaces.This,in turn,amplifies the resistance effect of the porous medium.As the equivalence ratio of VOCs to oxygen increases,the oxygen-deficient condition leads to a decrease in the molecular weight of the hydrocarbons involved in the reaction.The reaction temperature also shows a downward trend.A comparative analysis of the catalytic combustion characteristics of multi-component VOCs and single-component gases reveals that adding ethane and propane can facilitate methane oxidation.
文摘Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by Supported by the Scientific Research Foundation for High-Level Talents of Zhoukou Normal University(ZKNUC2024018).
文摘Energy shortage has become one of themost concerning issues in the world today,and improving energy utilization efficiency is a key area of research for experts and scholars worldwide.Small-diameter heat exchangers offer advantages such as reduced material usage,lower refrigerant charge,and compact structure.However,they also face challenges,including increased refrigerant pressure drop and smaller heat transfer area inside the tubes.This paper combines the advantages and disadvantages of both small and large-diameter tubes and proposes a combined-diameter heat exchanger,consisting of large and small diameters,for use in the indoor units of split-type air conditioners.There are relatively few studies in this area.In this paper,A theoretical and numerical computation method is employed to establish a theoretical-numerical calculation model,and its reliability is verified through experiments.Using this model,the optimal combined diameters and flow path design for a combined-diameter heat exchanger using R32 as the working fluid are derived.The results show that the heat transfer performance of all combined diameter configurations improves by 2.79%to 8.26%compared to the baseline design,with the coefficient of performance(COP)increasing from 4.15 to 4.27~4.5.These designs can save copper material,but at the cost of an increase in pressure drop by 66.86%to 131.84%.The scheme IIIH,using R32,is the optimal combined-diameter and flow path configuration that balances both heat transfer performance and economic cost.
基金funded by the National Natural Science Foundation of China(Grant No.42102169)the Shaanxi Province key Research and Development Project(Grant No.2023-ZDLSF-64)+1 种基金the Scientific Research and Technological Development Project of China National Logging Corporation(Grant No.25ZYCJSG013-2504)the Youth Science and Technology Special Fund of PetroChina(Grant No.2024DQ03172)。
文摘Geological CO_(2) storage is a promising strategy for reducing greenhouse gas emissions and has become a growing focus of research and deployment.This paper presents numerical simulations of CO_(2) injection and storage in a depleted gas reservoir within the B Depression and evaluates associated CO_(2) trapping mechanisms.In the base case,a constant injection rate of 3500 m^(3)/d over fifteen years resulted in a cumulative injection of 19.2×10^(6) m^(3).The CO_(2) plume expanded radially during injection and subsequently migrated up-dip under buoyancy forces.The final stored mass of CO_(2) in the reservoir was 10.6 million tonnes(Mt),representing less than 10% of its theoretical capacity.The plume was projected to reach the entrapment crest and the top of the reservoir within a century,indicating secure long-term containment.Structural,stratigraphic,and residual trapping dominate in Reservoir A(approximately 90%).Anticlinal closures with thick overlying mudstones in the Zhujiang Formation provide effective seals,further enhancing storage security.Reservoir properties and heterogeneity play a crucial role in controlling CO_(2) storage.However,reservoir heterogeneity exerts only a limited influence when intrinsic properties are favorable.Overall,the study and implementation of CO_(2) capture,utilization,and storage(CCUS)in China's offshore basins show promising prospects.
基金supported by the National Natural Science Foundation of China(No.11872211)。
文摘Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteristics and flow field evolution laws of overlapping rotor configurations in hovering conditions through numerical simulation methods.The research method involves constructing a computational model for rotor flow fields and aerodynamic characteristics based on the Reynolds-averaged Navier-Stokes(RANS)equations and the Spalart-Allmaras(S-A)turbulence model.The dynamic simulation of rotor rotational motion was achieved by using the moving nested grid technology.The reliability of the computational method was ensured through the grid independence verification and the comparison with experimental data.The research results indicate that in overlapping rotor systems,rotorⅡexperiences a decrease in thrust,significant power fluctuations,and reduced hovering efficiency due to continuous interference from the adjacent rotor’s wake and blade-vortex interactions.Blade-tip vortices undergo breakage,fusion,and secondary rolling in the overlapping region,forming large-scale turbulent structures that lead to attenuation of the induced velocity field and aerodynamic efficiency losses.Additionally,the interaction between the rotor downwash and the fuselage triggers a“fountain effect”and a sudden increase in surface pressure on the fuselage,exacerbating flow field distortion.Based on the aforementioned mechanisms,the safe flight of overlapping rotor configurations can be achieved by optimizing the configuration strategy of the rotational speed phase difference between adjacent blades.This study provides a theoretical basis for the rotor layout design and the aerodynamic performance enhancement of heavy-load eVTOL aircraft.
基金This work was supported by the National Natural ScienceFoundation of China(No.51925603)the Fundamental ResearchFunds for the Central Universities(No.2022ZFJH004).
文摘In the past few decades,multi-scale numerical methods have been developed to model dense gas-solidflow in fluidized beds with different resolutions,accuracies,and efficiencies.However,ambiguity needsto be clarified in the multi-scale numerical simulation of fluidized beds:(i)the selection of the submodels,parameters,and numerical resolution;(ii)the multivariate coupling of operating conditions,bed configurations,polydispersity,and additional forces.Accordingly,a state-of-the-art review is performed to assess the applicability of multi-scale numerical methods in predicting dense gas-solid flow influidized beds at specific fluidization regimes(e.g.,bubbling fluidization region,fast fluidization regime),with a focus on the inter-particle collision models,inter-phase interaction models,collision parameters,and polydispersity effect.A mutual restriction exists between resolution and efficiency.Higherresolution methods need more computational resources and thus are suitable for smaller-scale simulations to provide a database for closure development.Lower-resolution methods require fewercomputational resources and thus underpin large-scale simulations to explore macro-scale phenomena.Model validations need to be further conducted under multiple flow conditions and comprehensivemetrics(e.g.,velocity profiles at different heights,bubbles,or cluster characteristics)for furtherimprovement of the applicability of each numerical method.
基金financially supported by the National Natural Science Foundation of China(U20A20304)。
文摘Dense gas-solid flows are very common in actual production and industrial fields,so it is significant to understand their hydrodynamic characteristics and heat and mass transfer behaviors.This article provides a brief review of multi-scale numerical simulation of flow,heat and mass transfer behaviors in dense gas-solid flows.It describes multiscale models(direct numerical simulation,discrete particle model,and two-fluid model)and the results of related research.Finally,it discusses possible future developments in research on the flow,heat and mass transfer characteristics of dense gas-solid two-phase flows.
基金Opening Foundation of Key Laboratory of Explosive Energy Utilization and Control,Anhui Province(BP20240104)Graduate Innovation Program of China University of Mining and Technology(2024WLJCRCZL049)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_2701)。
文摘Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.
基金financially supported by the National Natural Science Foundation of China(No.51904026)the Fundamental Research Funds for the Central Universities(No.06500108)。
文摘Hydrogen displays the potential to partially replace pulverized coal injection(PCI)in the blast furnace,and it can reduce CO_(2)emissions.In this paper,a three-dimensional mathematical model of hydrogen and pulverized coal co-injection in blast furnace tuyere was established through numerical simulation,and the effect of hydrogen injection and oxygen enrichment interaction on pulverized coal combustion and raceway smelting was investigated.The simulation results indicate that when the coal injection rate decreased from 36 to 30t/h and the hydrogen injection increased from 0 to 3600 m^(3)/h,the CO_(2)emissions decreased from 1860 to 1551 kg/t,which represents a16.6%reduction,and the pulverized coal burnout decreased from 70.1%to 63.7%.The heat released from hydrogen combustion can not only promote the volatilization of pulverized coal but also affect the combustion reaction between volatilization and oxygen,which resulted in a decrease in the temperature at the end of the raceway.Co-injection of hydrogen with PCI increased the wall temperature near the upper half part of the raceway and at the outlet of the tuyere,which required a high cooling efficiency to extend the service life of the blast furnace.The increase in oxygen level compensated for the decreased average temperature in the raceway due to hydrogen injection.The increase in the oxygen content by 3%while maintaining constant hydrogen and PCI injection rates increased the burnout and average raceway temperature by 4.2%and 43 K,respectively.The mole fraction of CO and H_(2) production increased by 0.04 and 0.02,respectively.Burnout can be improved through optimization of the particle size distribution of pulverized coal.
基金financially supported by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology)(Grant No.SKLGP2020Z007)。
文摘Deeply buried mountain tunnels are often exposed to the risk of rock bursts,which always cause serious damage to the supporting structures and threaten the safety of the engineers.Due to the limited data available,a suitable approach to predict the rockburst tendency at the preliminary stage becomes very important.In this study,an integrated methodology combining 3D initial stress inversion and rockburst tendency prediction was developed and subsequently applied to a case study of the Sangzhuling Tunnel on the Sichuan–Tibet Railway.The numerical modelling involved inverting the initial stress field using a multiple linear regression method.The tunnel excavation was simulated separately by FDM and DEM,based on a stress boundary condition from the inverted stress field.The comparative analysis demonstrates that the rockburst ratio calculated using DEM(76.70%)exhibits a slight increase compared to FDM(75.38%),and the rockburst location is consistent with the actual situation.This suggests that DEM is more suitable for simulating the stress redistribution during excavation in a jointed rock mass.The numerical simulation combined with the deviatoric stress approach effectively predicts rockburst tendency,meeting the engineering requirements.Despite its limitations,numerical simulation remains a reliable method for predicting rock bursts.
基金supported by the National Natural Science Foundation of China (Grant No.52108361)the Sichuan Science and Technology Program of China (Grant No.2023YFS0436)the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project (Grant No.SKLGP2022Z015).
文摘Bedding parallel stepped rock slopes exist widely in nature and are used in slope engineering.They are characterized by complex topography and geological structure and are vulnerable to shattering under strong earthquakes.However,no previous studies have assessed the mechanisms underlying seismic failure in rock slopes.In this study,large-scale shaking table tests and numerical simulations were conducted to delineate the seismic failure mechanism in terms of acceleration,displacement,and earth pressure responses combined with shattering failure phenomena.The results reveal that acceleration response mutations usually occur within weak interlayers owing to their inferior performance,and these mutations may transform into potential sliding surfaces,thereby intensifying the nonlinear seismic response characteristics.Cumulative permanent displacements at the internal corners of the berms can induce quasi-rigid displacements at the external corners,leading to greater permanent displacements at the internal corners.Therefore,the internal corners are identified as the most susceptible parts of the slope.In addition,the concept of baseline offset was utilized to explain the mechanism of earth pressure responses,and the result indicates that residual earth pressures at the internal corners play a dominant role in causing deformation or shattering damage.Four evolutionary deformation phases characterize the processes of seismic responses and shattering failure of the bedding parallel stepped rock slope,i.e.the formation of tensile cracks at the internal corners of the berm,expansion of tensile cracks and bedding surface dislocation,development of vertical tensile cracks at the rear edge,and rock mass slipping leading to slope instability.Overall,this study provides a scientific basis for the seismic design of engineering slopes and offers valuable insights for further studies on preventing seismic disasters in bedding parallel stepped rock slopes.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2021B0301030001)the National Key Research and Development Program of China(Grant No.2021YFB3802300)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics(Grant No.JCKYS2022212004)。
文摘The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.
基金National Natural Science Foundation of China(51971103)Key Research and Development Program in Gansu Province(20YF8GA052)。
文摘A suction casting experiment was conducted on Zr_(55)Cu_(30)Al_(10)Ni_(5)(at%)amorphous alloy.Using ProCAST software,numerical simulations were performed to analyze the filling and solidification processes.The velocity field during the filling process and the temperature field during the solidification process of the alloy melt under different process parameters were obtained.Based on the simulation results,a Zr-based amorphous alloy micro-gear was prepared via casting.The results indicate that increasing the suction casting temperature enhances the fluidity of alloy melt but induces unstable flow rate during filling,which is detrimental to complete filling.Zr-based amorphous micro-gears with a module of 0.6 mm,a tooth top diameter of 8 mm,and 10 teeth were prepared through the suction casting.X-ray diffraction and differential scanning calorimetry analyses confirm that the fabricated micro-gear exhibits characteristic amorphous structural features,demonstrating well-defined geometrical contours and satisfactory forming completeness.
基金Jiangsu Provincial Natural Science Foundation of China(BK20211232)2023 Major Science and Technology Projects of Nanjing City(202309011)。
文摘To further reduce the explosive thickness and to improve the bonding quality of titanium/steel composite plates,explosive welding experiments of TA1/Q235 were conducted using a low detonation velocity explosive(53#)under the guidance of the explosive welding lower limit principle with the flyer plate thicknesses of 1,2,and 4 mm and gaps of 3,6,and 8 mm.The weldability window for titanium/steel explosive welding was calculated,and a quantitative relationship between dynamic and static process parameters was developed.Aβ-V_(p) high-speed inclined collision model was proposed,and two-dimensional numerical simulations for the explosive welding tests were performed using the smoothed particle hydrodynamics(SPH)algorithm,revealing the growth evolution mechanisms of the typical waveform morphology characteristics.Through microstructural characterization techniques,such as optical microscope,scanning electron microscope,energy dispersive spectrometer,and electron backscattered diffractometer,and mechanical property tests in terms of shear strength,bending performance,and impact toughness,the microstructure and mechanical properties of the interfaces of explosively welded TA1/Q235 composite plates were investigated.Results show that the quality of interface bonding is excellent,presenting typical waveform morphology with an average interface shear strength above 330 MPa and an average impact toughness exceeding 81 J.All samples can be bent to 180°without significant delamination or cracking defects.
