Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer ...Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.展开更多
The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope ...The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope and image processing technology were employed to achieve a quantitative grain size distribution of NiTi alloys so as to provide experimental data for molecular dynamics modeling at the atomic scale.Considering the size effect of molecular dynamics model on material properties,a reasonable modeling size was provided by taking into account three characteristic dimensions from the perspective of macro,meso,and micro scales according to the Buckinghamπtheorem.Then,the corresponding MD simulation on deformation and fracture behavior was investigated to derive a parameterized traction-separation(T-S)law,and then it was embedded into cohesive elements of finite element software.Thus,the crack propagation behavior in NiTi alloys was reproduced by the finite element method(FEM).The experimental results show that the predicted initiation fracture toughness is in good agreement with experimental data.In addition,it is found that the dynamics initiation fracture toughness increases with decreasing grain size and increasing loading velocity.展开更多
With the rapid development of Internet technology,the application of electronic circuit simulation technology is more and more extensive,and now it has been applied to integrated circuit design.Because the electronic ...With the rapid development of Internet technology,the application of electronic circuit simulation technology is more and more extensive,and now it has been applied to integrated circuit design.Because the electronic circuit simulation technology has high efficiency,flexible and simple application,as well as stable performance,it has shown more and more good application prospects in integrated circuit design.Based on the strong development trend of electronic circuit simulation technology,it will be more and more widely used in daily life in the future,so the research on electronic circuit simulation technology is more and more in-depth.In this paper,the application of electronic circuit technology in integrated circuit design is studied,hoping that the technology can provide a more concise and efficient research and development way for electronic applications.展开更多
A model of coupling macro finite volume method(FVM) and cellular automata(CA) is proposed in this paper to explore the columnar-to-equiaxed transition(CET) during selective laser melting(SLM) of rare earth magnesium a...A model of coupling macro finite volume method(FVM) and cellular automata(CA) is proposed in this paper to explore the columnar-to-equiaxed transition(CET) during selective laser melting(SLM) of rare earth magnesium alloy.Taking into account the impact of recoil pressure and Marangoni convection on the molten pool temperature field,the grain structure is simulated.As suggested by the simulation results,with the undissolved Zr serving as heterogeneous nucleation sites,the liquid undercooled layer under the combined action of forced cooling,the temperature gradient and the liquid solute concentration gradient leads to CET.While considering the dissolution of Zr in magnesium matrix,the results demonstrate that the dissolution of element Zr is effective in significantly inhibiting the growth of columnar crystals and ensuring the sufficient constitutional supercooling(CS) required for nucleation.In addition,to raise the preheating temperature contributes to enhancing the outcome of nucleation and incresing the grain size.Invoking the interdependence model(IM),with the cooling rate gradually increasing in the SLM process of magnesium alloy,the nucleation-free zone(NFZ) reduces by decreasing the solute diffusion layer in the front of the solid/liquid(SL) interface and the temperature gradient.The reduction in temperature gradient can promote undercooling for nucleation and facilitate the development of equiaxed crystals.The simulation results are qualitatively verified as highly consistent through experimentation.展开更多
The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）...The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）. RAMS and FLUENT are combined as a multi-scale numerical modeling system, in which the RAMS simulated data are delivered to the computational model for FLUENT simulation in an offline way. Numerical simulations are performed to present and preliminarily validate the capability of the multi-scale modeling system, and the results show that the modeling system can reasonably provide information on the meteorological elements in an urban area from the urban scale to the city-block scale, especially the details of the turbulent flows within the USL.展开更多
Dynamic flood disaster simulation is an emerging and promising technology significantly useful in urban planning,risk assessment,and integrated decision support systems.It is still an important issue to integrate the ...Dynamic flood disaster simulation is an emerging and promising technology significantly useful in urban planning,risk assessment,and integrated decision support systems.It is still an important issue to integrate the large assets such as dynamic observational data,numerical flood simulation models,geographic information technologies,and computing resources into a unified framework.For the intended end user,it is also a holistic solution to create computer interpretable representations and gain insightful understanding of the dynamic disaster processes,the complex impacts,and interactions of disaster factors.In particular,it is still difficult to access and join harmonized data,processing algorithms,and models that are provided by different environmental information infrastructures.In this paper,we demonstrate a virtual geographic environments-based integrated environmental simulation framework for flood disaster management based on the notion of interlinked resources,which is capable of automated accumulating and manipulating of sensor data,creating dynamic geo-analysis and three-dimensional visualizations of ongoing geo-process,and updating the contents of simulation models representing the real environment.The prototype system is evaluated by applying it as a proof of concept to integrate in situ weather observations,numerical weather and flood disaster simulation models,visualization,and analysis of the real time flood event.Case applications indicate that the developed framework can be adopted for use by decision-makers for short-term planning and control since the resulting simulation and visualization are completely based on the latest status of environment.展开更多
The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the c...The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.展开更多
Concentration distribution of the deterrent in single-base propellant during the process of firing plays an important role in the ballistic properties of gun propellant in weapons. However, the diffusion coefficient c...Concentration distribution of the deterrent in single-base propellant during the process of firing plays an important role in the ballistic properties of gun propellant in weapons. However, the diffusion coefficient calculated by molecular dynamics(MD) simulation is 6 orders of magnitude larger than the experimental values. Meanwhile, few simple and comprehensive theoretical models can explain the phenomenon and accurately predict the concentration distribution of the propellant. Herein, an onion model combining with MD simulation and finite element method of diffusion in propellants is introduced to bridge the gap between the experiments and simulations, and correctly predict the concentration distribution of deterrent. Furthermore, a new time scale is found to characterize the diffusion process. Finally, the time-and position-depended concentration distributions of dibutyl phthalate in nitrocellulose are measured by Raman spectroscopy to verify the correctness of the onion model. This work not only provides guidance for the design of the deterrent, but could be also extended to the diffusion of small molecules in polymer with different crystallinity.展开更多
Streamwise Body Force Model(SBFM)could be used to simulate the force of blade on the airflow,resulting in rapid propulsion-airframe integrated simulation.However,when subjected to inlet distortion,the upstream flow fi...Streamwise Body Force Model(SBFM)could be used to simulate the force of blade on the airflow,resulting in rapid propulsion-airframe integrated simulation.However,when subjected to inlet distortion,the upstream flow field of fan stage is redistributed,which causes inaccurate prediction of fan stage performance.As inspired by the upstream influence of compressor,this paper aims to present a modification strategy for SBFM method to predict the compressor performance under circumferential inlet distortion without any knowledge of compressor geometry.Based on the linearized motion equation,the Upstream Influence Model(UIM)is introduced to predict the upstream flow field redistribution.Then the theoretical Mach number at Aerodynamic Interface Plane(AIP)position is calculated and selected to determine the corresponding body force coefficients based on the functional relationship between body force coefficients and Mach number,thus the upstream influence of compressor could be accurately quantified and the Modified Streamwise Body Force Model(MSBFM)could be established.Two studied cases are calculated with different methods and the upstream flow fields are analyzed.The prediction error of MSBFM method for compressor adiabatic efficiency is less than 3%,and the calculation efficiency is improved 20 times under the condition of ensuring computing accuracy.The MSBFM method has the potential for rapid propulsion-airframe integrated simulation.展开更多
Casting microstructure evolution is difficult to describe quantitatively by only a separate simulation of dendrite scale or grain scale, and the numerical simulation of these two scales is difficult to render compatib...Casting microstructure evolution is difficult to describe quantitatively by only a separate simulation of dendrite scale or grain scale, and the numerical simulation of these two scales is difficult to render compatible. A three-dimensional cellular automaton model couplling both dendritic scale and grain scale is developed to simulate the microstructure evolution of the nickel-based single crystal superalloy DD406. Besides, a macro–mesoscopic/microscopic coupling solution algorithm is proposed to improve computational efficiency. The simulation results of dendrite growth and grain growth of the alloy are obtained and compared with the results given in previous reports. The results show that the primary dendritic arm spacing and secondary dendritic arm spacing of the dendritic growth are consistent with the theoretical and experimental results. The mesoscopic grain simulation can be used to obtain results similar to those of microscopic dendrites simulation. It is indicated that the developed model is feasible and effective.展开更多
With deep development of state grid’s system of "Three Sets of Five [1]", China is in urgent need of establishing an appropriate type of simulation system to rapidly improve operation efficiency and the lev...With deep development of state grid’s system of "Three Sets of Five [1]", China is in urgent need of establishing an appropriate type of simulation system to rapidly improve operation efficiency and the level of maintainers, which aim at the integrated operation of substation operation and maintenance service. This article gives an introduction of a simulation training system which is designed for operation-skills training in electrical systems. By the composition of the multiple subjects and skills training for operations staff, this system can provide human guarantee and intellectual support for the "Big-Centralized Overhal".展开更多
An integrated simulation system for solar sail spacecraft with individually controllable elements(SSICE)is investigated in this paper,including the modelling of power management,thermal control,attitude control,umbra ...An integrated simulation system for solar sail spacecraft with individually controllable elements(SSICE)is investigated in this paper,including the modelling of power management,thermal control,attitude control,umbra prediction,and orbit prediction subsystems.Considering the self-control and reactivity subsystems,an agent based method is applied to develop the subsystem models.Each subsystem is an individual agent component,which manages itself autonomously and reacts to the requirements from other agents.To reduce computing burden on a specified computer and improve the suitability and flexibility of the integrated simulation system,a distributed framework is employed in the system by deploying agent components on different computers.The data transmission among agents is based on the transmission control protocol/Internet protocol(TCP/IP).A practical example of sun pointing is used to test the operating effect of the integrated system and the working condition of subsystems.The simulation results verify that the integrated system has higher sun pointing accuracy,quicker dynamical response to variations of the lighting,attitude and temperature and fewer computing resources with effective and accurate subsystems.The integrated system proposed in this paper can be applied to solar sail design,operation,and mission planning.展开更多
A double-effect reactive distillation(DERD)process was proposed for the production of propylene glycol methyl ether from propylene oxide and methanol to overcome the shortcoming of low selectivity and high-energy cons...A double-effect reactive distillation(DERD)process was proposed for the production of propylene glycol methyl ether from propylene oxide and methanol to overcome the shortcoming of low selectivity and high-energy consumption in the tubular plug-flow reactor.A single-column reactive distillation(RD)process was conducted under optimized operating conditions based on sensitivity analysis as a reference.The results demonstrated that the proposed DERD process is able to achieve more than 95%selectivity of the desired product.After that,a design approach of the DERD process with an objective of the minimum operating cost was proposed to achieve further energy savings in the RD process.The proposed DERD configuration can provide a large energy-savings by totally utilization of the overhead vapor steam in the high-pressure RD column.A comparison of the single-column RD process revealed that the proposed DERD process can reduce the operating cost and the total annual cost of 25.3%and 30.7%,respectively,even though the total capital cost of DERD process is larger than that of the RD process.展开更多
This paper presents an integrated protection technique for power distribution systems. A novel integrated protection scheme based on overcurrent protection technique for distribution system is described, in which a sp...This paper presents an integrated protection technique for power distribution systems. A novel integrated protection scheme based on overcurrent protection technique for distribution system is described, in which a specially designed protection relay is installed at each substation of a network and responsible for the protection of every line sections connected to the substation busbar The conventional directional overcurrent and the new adaptive accelerated protection algorithms with multiple settings are implemented into the relay to cover all the protected line sections. The paper includes studies of a typical multi section distribution network to demonstrate the principle of the scheme. Studies show that the new scheme not only offer the new protection features for individual power line section, but also provide the characteristics of integrated protection.展开更多
In this paper, a new concept of simulation operating system (SIMOS) is described. A detailed definition of SIMOS is given, and two integrated simulation software (IPSOS and IMSS) are introduced based on SIMOS.
Computational simulation is an important technical means in research of nuclear fuel materials.Since nuclear fuel issues are inherently multi-scopic,it is imperative to study them with multi-scale simulation scheme.At...Computational simulation is an important technical means in research of nuclear fuel materials.Since nuclear fuel issues are inherently multi-scopic,it is imperative to study them with multi-scale simulation scheme.At present,the development of multi-scale simulation for nuclear fuel materials calls for a more systematic approach,in which lies the main purpose of this article.The most important thing in multi-scale simulation is to accurately formulate the goals to be achieved and the types of methods to be used.In this regard,we first summarize the basic principles and applicability of the simulation methods which are commonly used in nuclear fuel research and are based on different scales ranging from micro to macro,i.e.First-Principles(FP),Molecular Dynamics(MD),Kinetic Monte Carlo(KMC),Phase Field(PF),Rate Theory(RT),and Finite Element Method(FEM).And then we discuss the major material issues in this field,also ranging from micro-scale to macro-scale and covering both pellets and claddings,with emphasis on what simulation method would be most suitable for solving each of the issues.Finally,we give our prospective analysis and understanding about the feasible ways of multi-scale integration and relevant handicaps and challenges.展开更多
To deal with the low location accuracy issue of existing underwater navigation technologies in autonomous underwater vehicles(AUVs),a distributed fusion algorithm which combines the model's analysis method with a ...To deal with the low location accuracy issue of existing underwater navigation technologies in autonomous underwater vehicles(AUVs),a distributed fusion algorithm which combines the model's analysis method with a multi-scale transformation method is proposed for integrated navigation system based on AUV.First,integrated navigation system theory and system error sources are introduced in details.Secondly,a navigation system's observation equation on the original scale is decomposed into different scales by the discrete wavelet transform method,and noise reduction is performed by setting the wavelet de-noising threshold.At last,the dynamic equation and observation equations are fused on different scales by the wavelet transformation and Kalman filter.The results show that the proposed algorithm has smaller navigation error and higher navigation accuracy.展开更多
The integrated simulation and optimization technology of reservoir-wellbore-pipe network is developed to reflect the mutual influence and restriction among reservoir engineering,oil production engineering and surface ...The integrated simulation and optimization technology of reservoir-wellbore-pipe network is developed to reflect the mutual influence and restriction among reservoir engineering,oil production engineering and surface engineering,and to obtain the scheme with minimum conflict and optimal benefit in each step.This technology is based on the concept of global optimization to maximize production and profit,reduce costs and increase benefit.This paper elaborates the current situation of integrated simulation technology of reservoir-wellbore-pipe network both at home and abroad,discusses its correlation with the primary business of Sinopec and its development from three aspects of modeling,cloud platform and intellectualization.Suggestions on its future development are put forward from underlying data,software platform,popularization and application,and cross-border integration to provide means and guidance for the construction of intelligent oil and gas fields.The results show that the integrated simulation of reservoir-wellbore-pipe network can better reflect the optimization requirements of each step,avoid the ineffective operation of field equipment,and effectively improve the efficiency of research and management.Coupling solution,global optimization method and pressure fitting,which can make the simulation results reflect the real situation,are the key technologies for the network.The theoretical technology and main function research of integrated simulation technology have been mature,but the large-scale application and local function improvement of oil and gas fields are yet to be promoted.In the future,the integrated simulation of reservoir-wellbore-pipe network will develop from digitalization to modeling and intellectualization,from local simulation to cloud computing,and from manual intervention to intelligent decision-making.We suggest speeding up the construction of the unified database and model base of the whole underlying platform,strengthening the construction of software integration and integration platform with independent intellectual property rights,speeding up the popularization and application of intelligent oil and gas field demonstration projects,and strengthening the integration of oil and gas industry with artificial intelligence(AI),big data and block chain for its development.展开更多
Based on the displacement discontinuity method and the discrete fracture unified pipe network model,a sequential iterative numerical method was used to build a fracturing-production integrated numerical model of shale...Based on the displacement discontinuity method and the discrete fracture unified pipe network model,a sequential iterative numerical method was used to build a fracturing-production integrated numerical model of shale gas well considering the two-phase flow of gas and water.The model accounts for the influence of natural fractures and matrix properties on the fracturing process and directly applies post-fracturing formation pressure and water saturation distribution to subsequent well shut-in and production simulation,allowing for a more accurate fracturing-production integrated simulation.The results show that the reservoir physical properties have great impacts on fracture propagation,and the reasonable prediction of formation pressure and reservoir fluid distribution after the fracturing is critical to accurately predict the gas and fluid production of the shale gas wells.Compared with the conventional method,the proposed model can more accurately simulate the water and gas production by considering the impact of fracturing on both matrix pressure and water saturation.The established model is applied to the integrated fracturing-production simulation of practical horizontal shale gas wells.The simulation results are in good agreement with the practical production data,thus verifying the accuracy of the model.展开更多
A modeling method of regional integrated energy system based on bus method and transient simulation is proposed,and the system optimization is based on the dynamic balance of supply and demand in the whole year energy...A modeling method of regional integrated energy system based on bus method and transient simulation is proposed,and the system optimization is based on the dynamic balance of supply and demand in the whole year energy supply cycle.A CCHP systemof gas turbine coupled with ground source heat pump and electric refrigeration unit is constructed.The energy relationship of the systemis described by bus structure,and the transient calculationmodel is built on TRNSYS platform.The weighted sum of annual total cost saving rate,primary energy saving rate and environmental pollutant shadow cost saving rate is taken as the optimized objective function,and on the basis of annual dynamic balance,the Hooke-Jeeves algorithm is used for optimization of the system configuration.A complex commercial area in Beijing is taken as an example,and different weighting coefficients are set for optimization of the system configuration.The results show that,from the perspective of economy,environmental benefit and primary energy consumption,performance of the system increases and then decreases with rise of gas turbine power;under the simulated cooling/heating load,the maximum number of optimum configuration is seen in the combination of 35 kW gas turbine+723 kW GSHP and 1178 kW electric chiller;in comparison with traditional distributed system,the annual cost saving rate,primary energy saving rate and environmental pollutant shadow cost saving rate of the system are 29.4%,49.6%and 58.2%,respectively.展开更多
基金Opening Foundation of Key Laboratory of Explosive Energy Utilization and Control,Anhui Province(BP20240104)Graduate Innovation Program of China University of Mining and Technology(2024WLJCRCZL049)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_2701)。
文摘Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.
基金Funded by the National Natural Science Foundation of China Academy of Engineering Physics and Jointly Setup"NSAF"Joint Fund(No.U1430119)。
文摘The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope and image processing technology were employed to achieve a quantitative grain size distribution of NiTi alloys so as to provide experimental data for molecular dynamics modeling at the atomic scale.Considering the size effect of molecular dynamics model on material properties,a reasonable modeling size was provided by taking into account three characteristic dimensions from the perspective of macro,meso,and micro scales according to the Buckinghamπtheorem.Then,the corresponding MD simulation on deformation and fracture behavior was investigated to derive a parameterized traction-separation(T-S)law,and then it was embedded into cohesive elements of finite element software.Thus,the crack propagation behavior in NiTi alloys was reproduced by the finite element method(FEM).The experimental results show that the predicted initiation fracture toughness is in good agreement with experimental data.In addition,it is found that the dynamics initiation fracture toughness increases with decreasing grain size and increasing loading velocity.
文摘With the rapid development of Internet technology,the application of electronic circuit simulation technology is more and more extensive,and now it has been applied to integrated circuit design.Because the electronic circuit simulation technology has high efficiency,flexible and simple application,as well as stable performance,it has shown more and more good application prospects in integrated circuit design.Based on the strong development trend of electronic circuit simulation technology,it will be more and more widely used in daily life in the future,so the research on electronic circuit simulation technology is more and more in-depth.In this paper,the application of electronic circuit technology in integrated circuit design is studied,hoping that the technology can provide a more concise and efficient research and development way for electronic applications.
基金the Key Research and Development Plan of Shaanxi Province (No. 2020GY-255)Scientific Research Plan Projects of Shaanxi Education Department (No. 20JC020)Scientific Research Plan Projects of Xi’an Technology Department (No. 2020KJRC0052)。
文摘A model of coupling macro finite volume method(FVM) and cellular automata(CA) is proposed in this paper to explore the columnar-to-equiaxed transition(CET) during selective laser melting(SLM) of rare earth magnesium alloy.Taking into account the impact of recoil pressure and Marangoni convection on the molten pool temperature field,the grain structure is simulated.As suggested by the simulation results,with the undissolved Zr serving as heterogeneous nucleation sites,the liquid undercooled layer under the combined action of forced cooling,the temperature gradient and the liquid solute concentration gradient leads to CET.While considering the dissolution of Zr in magnesium matrix,the results demonstrate that the dissolution of element Zr is effective in significantly inhibiting the growth of columnar crystals and ensuring the sufficient constitutional supercooling(CS) required for nucleation.In addition,to raise the preheating temperature contributes to enhancing the outcome of nucleation and incresing the grain size.Invoking the interdependence model(IM),with the cooling rate gradually increasing in the SLM process of magnesium alloy,the nucleation-free zone(NFZ) reduces by decreasing the solute diffusion layer in the front of the solid/liquid(SL) interface and the temperature gradient.The reduction in temperature gradient can promote undercooling for nucleation and facilitate the development of equiaxed crystals.The simulation results are qualitatively verified as highly consistent through experimentation.
基金This study was supported by the National Natural Science Foundation of China （Grant Nos. 40233030, 40405004, 40405014）.
文摘The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）. RAMS and FLUENT are combined as a multi-scale numerical modeling system, in which the RAMS simulated data are delivered to the computational model for FLUENT simulation in an offline way. Numerical simulations are performed to present and preliminarily validate the capability of the multi-scale modeling system, and the results show that the modeling system can reasonably provide information on the meteorological elements in an urban area from the urban scale to the city-block scale, especially the details of the turbulent flows within the USL.
基金This study is supported by the National High Technology Research and Development Program of China(863 Program)(Nos.2012AA121305 and 2013AA120701)the National Natural Science Foundation of China(Nos.41471320 and 41201440).
文摘Dynamic flood disaster simulation is an emerging and promising technology significantly useful in urban planning,risk assessment,and integrated decision support systems.It is still an important issue to integrate the large assets such as dynamic observational data,numerical flood simulation models,geographic information technologies,and computing resources into a unified framework.For the intended end user,it is also a holistic solution to create computer interpretable representations and gain insightful understanding of the dynamic disaster processes,the complex impacts,and interactions of disaster factors.In particular,it is still difficult to access and join harmonized data,processing algorithms,and models that are provided by different environmental information infrastructures.In this paper,we demonstrate a virtual geographic environments-based integrated environmental simulation framework for flood disaster management based on the notion of interlinked resources,which is capable of automated accumulating and manipulating of sensor data,creating dynamic geo-analysis and three-dimensional visualizations of ongoing geo-process,and updating the contents of simulation models representing the real environment.The prototype system is evaluated by applying it as a proof of concept to integrate in situ weather observations,numerical weather and flood disaster simulation models,visualization,and analysis of the real time flood event.Case applications indicate that the developed framework can be adopted for use by decision-makers for short-term planning and control since the resulting simulation and visualization are completely based on the latest status of environment.
基金supported by the National Science and Technology Major Project,China(No.2017-III-0010-0036).
文摘The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.
基金sponsored by the National Natural Science Foundation of China (91834301, 22078088, 22005143)the National Natural Science Foundation of China for Innovative Research Groups (51621002)。
文摘Concentration distribution of the deterrent in single-base propellant during the process of firing plays an important role in the ballistic properties of gun propellant in weapons. However, the diffusion coefficient calculated by molecular dynamics(MD) simulation is 6 orders of magnitude larger than the experimental values. Meanwhile, few simple and comprehensive theoretical models can explain the phenomenon and accurately predict the concentration distribution of the propellant. Herein, an onion model combining with MD simulation and finite element method of diffusion in propellants is introduced to bridge the gap between the experiments and simulations, and correctly predict the concentration distribution of deterrent. Furthermore, a new time scale is found to characterize the diffusion process. Finally, the time-and position-depended concentration distributions of dibutyl phthalate in nitrocellulose are measured by Raman spectroscopy to verify the correctness of the onion model. This work not only provides guidance for the design of the deterrent, but could be also extended to the diffusion of small molecules in polymer with different crystallinity.
基金supported by the National Natural Science Foundation of China(Nos.52176032,51976005 and 52006002)the Advanced Jet Propulsion Creativity Center,China(No.HKCX2020-02-013)+2 种基金the National Science and Technology Major Project,China(Nos.2017-II-0004-0016 and 2017-II-0005-0018)the Fundamental Research Funds for the Central Universities,Chinathe Beijing Nova Program,China。
文摘Streamwise Body Force Model(SBFM)could be used to simulate the force of blade on the airflow,resulting in rapid propulsion-airframe integrated simulation.However,when subjected to inlet distortion,the upstream flow field of fan stage is redistributed,which causes inaccurate prediction of fan stage performance.As inspired by the upstream influence of compressor,this paper aims to present a modification strategy for SBFM method to predict the compressor performance under circumferential inlet distortion without any knowledge of compressor geometry.Based on the linearized motion equation,the Upstream Influence Model(UIM)is introduced to predict the upstream flow field redistribution.Then the theoretical Mach number at Aerodynamic Interface Plane(AIP)position is calculated and selected to determine the corresponding body force coefficients based on the functional relationship between body force coefficients and Mach number,thus the upstream influence of compressor could be accurately quantified and the Modified Streamwise Body Force Model(MSBFM)could be established.Two studied cases are calculated with different methods and the upstream flow fields are analyzed.The prediction error of MSBFM method for compressor adiabatic efficiency is less than 3%,and the calculation efficiency is improved 20 times under the condition of ensuring computing accuracy.The MSBFM method has the potential for rapid propulsion-airframe integrated simulation.
文摘Casting microstructure evolution is difficult to describe quantitatively by only a separate simulation of dendrite scale or grain scale, and the numerical simulation of these two scales is difficult to render compatible. A three-dimensional cellular automaton model couplling both dendritic scale and grain scale is developed to simulate the microstructure evolution of the nickel-based single crystal superalloy DD406. Besides, a macro–mesoscopic/microscopic coupling solution algorithm is proposed to improve computational efficiency. The simulation results of dendrite growth and grain growth of the alloy are obtained and compared with the results given in previous reports. The results show that the primary dendritic arm spacing and secondary dendritic arm spacing of the dendritic growth are consistent with the theoretical and experimental results. The mesoscopic grain simulation can be used to obtain results similar to those of microscopic dendrites simulation. It is indicated that the developed model is feasible and effective.
文摘With deep development of state grid’s system of "Three Sets of Five [1]", China is in urgent need of establishing an appropriate type of simulation system to rapidly improve operation efficiency and the level of maintainers, which aim at the integrated operation of substation operation and maintenance service. This article gives an introduction of a simulation training system which is designed for operation-skills training in electrical systems. By the composition of the multiple subjects and skills training for operations staff, this system can provide human guarantee and intellectual support for the "Big-Centralized Overhal".
基金This work was supported by the National Natural Science Foundation of China(11772024).
文摘An integrated simulation system for solar sail spacecraft with individually controllable elements(SSICE)is investigated in this paper,including the modelling of power management,thermal control,attitude control,umbra prediction,and orbit prediction subsystems.Considering the self-control and reactivity subsystems,an agent based method is applied to develop the subsystem models.Each subsystem is an individual agent component,which manages itself autonomously and reacts to the requirements from other agents.To reduce computing burden on a specified computer and improve the suitability and flexibility of the integrated simulation system,a distributed framework is employed in the system by deploying agent components on different computers.The data transmission among agents is based on the transmission control protocol/Internet protocol(TCP/IP).A practical example of sun pointing is used to test the operating effect of the integrated system and the working condition of subsystems.The simulation results verify that the integrated system has higher sun pointing accuracy,quicker dynamical response to variations of the lighting,attitude and temperature and fewer computing resources with effective and accurate subsystems.The integrated system proposed in this paper can be applied to solar sail design,operation,and mission planning.
基金supported by the National Nature Science Foundation of China(21878315 and 21808223)National Key Research and Development Program of China(2017YFA0206803)+3 种基金Innovation Academy for Green ManufactureCAS(IAGM2020C17)K.C.Wong Education Foundation(GJTD-2018-04)。
文摘A double-effect reactive distillation(DERD)process was proposed for the production of propylene glycol methyl ether from propylene oxide and methanol to overcome the shortcoming of low selectivity and high-energy consumption in the tubular plug-flow reactor.A single-column reactive distillation(RD)process was conducted under optimized operating conditions based on sensitivity analysis as a reference.The results demonstrated that the proposed DERD process is able to achieve more than 95%selectivity of the desired product.After that,a design approach of the DERD process with an objective of the minimum operating cost was proposed to achieve further energy savings in the RD process.The proposed DERD configuration can provide a large energy-savings by totally utilization of the overhead vapor steam in the high-pressure RD column.A comparison of the single-column RD process revealed that the proposed DERD process can reduce the operating cost and the total annual cost of 25.3%and 30.7%,respectively,even though the total capital cost of DERD process is larger than that of the RD process.
文摘This paper presents an integrated protection technique for power distribution systems. A novel integrated protection scheme based on overcurrent protection technique for distribution system is described, in which a specially designed protection relay is installed at each substation of a network and responsible for the protection of every line sections connected to the substation busbar The conventional directional overcurrent and the new adaptive accelerated protection algorithms with multiple settings are implemented into the relay to cover all the protected line sections. The paper includes studies of a typical multi section distribution network to demonstrate the principle of the scheme. Studies show that the new scheme not only offer the new protection features for individual power line section, but also provide the characteristics of integrated protection.
文摘In this paper, a new concept of simulation operating system (SIMOS) is described. A detailed definition of SIMOS is given, and two integrated simulation software (IPSOS and IMSS) are introduced based on SIMOS.
基金the financial support from the China National Natural Science Foundation project(11675126)Project of China Nuclear Power Innovation Center,China National Nuclear Corporation Science fund for talented young scholars(FY18000120)the National Science and Technology Major Project of the Ministry of Science and Technology of China(2019ZX06004009).
文摘Computational simulation is an important technical means in research of nuclear fuel materials.Since nuclear fuel issues are inherently multi-scopic,it is imperative to study them with multi-scale simulation scheme.At present,the development of multi-scale simulation for nuclear fuel materials calls for a more systematic approach,in which lies the main purpose of this article.The most important thing in multi-scale simulation is to accurately formulate the goals to be achieved and the types of methods to be used.In this regard,we first summarize the basic principles and applicability of the simulation methods which are commonly used in nuclear fuel research and are based on different scales ranging from micro to macro,i.e.First-Principles(FP),Molecular Dynamics(MD),Kinetic Monte Carlo(KMC),Phase Field(PF),Rate Theory(RT),and Finite Element Method(FEM).And then we discuss the major material issues in this field,also ranging from micro-scale to macro-scale and covering both pellets and claddings,with emphasis on what simulation method would be most suitable for solving each of the issues.Finally,we give our prospective analysis and understanding about the feasible ways of multi-scale integration and relevant handicaps and challenges.
基金National Natural Science Foundation of China(51779057,51709061,51509057)the Equipment Pre-Research Project(41412030201)the National 863 High Technology Development Plan Project(2011AA09A106)。
文摘To deal with the low location accuracy issue of existing underwater navigation technologies in autonomous underwater vehicles(AUVs),a distributed fusion algorithm which combines the model's analysis method with a multi-scale transformation method is proposed for integrated navigation system based on AUV.First,integrated navigation system theory and system error sources are introduced in details.Secondly,a navigation system's observation equation on the original scale is decomposed into different scales by the discrete wavelet transform method,and noise reduction is performed by setting the wavelet de-noising threshold.At last,the dynamic equation and observation equations are fused on different scales by the wavelet transformation and Kalman filter.The results show that the proposed algorithm has smaller navigation error and higher navigation accuracy.
基金funded by the SINOPEC Science and Technology Project(No.P18080).
文摘The integrated simulation and optimization technology of reservoir-wellbore-pipe network is developed to reflect the mutual influence and restriction among reservoir engineering,oil production engineering and surface engineering,and to obtain the scheme with minimum conflict and optimal benefit in each step.This technology is based on the concept of global optimization to maximize production and profit,reduce costs and increase benefit.This paper elaborates the current situation of integrated simulation technology of reservoir-wellbore-pipe network both at home and abroad,discusses its correlation with the primary business of Sinopec and its development from three aspects of modeling,cloud platform and intellectualization.Suggestions on its future development are put forward from underlying data,software platform,popularization and application,and cross-border integration to provide means and guidance for the construction of intelligent oil and gas fields.The results show that the integrated simulation of reservoir-wellbore-pipe network can better reflect the optimization requirements of each step,avoid the ineffective operation of field equipment,and effectively improve the efficiency of research and management.Coupling solution,global optimization method and pressure fitting,which can make the simulation results reflect the real situation,are the key technologies for the network.The theoretical technology and main function research of integrated simulation technology have been mature,but the large-scale application and local function improvement of oil and gas fields are yet to be promoted.In the future,the integrated simulation of reservoir-wellbore-pipe network will develop from digitalization to modeling and intellectualization,from local simulation to cloud computing,and from manual intervention to intelligent decision-making.We suggest speeding up the construction of the unified database and model base of the whole underlying platform,strengthening the construction of software integration and integration platform with independent intellectual property rights,speeding up the popularization and application of intelligent oil and gas field demonstration projects,and strengthening the integration of oil and gas industry with artificial intelligence(AI),big data and block chain for its development.
基金Supported by the National Natural Science Foundation of China(52374043)Key Program of the National Natural Science Foundation of China(52234003).
文摘Based on the displacement discontinuity method and the discrete fracture unified pipe network model,a sequential iterative numerical method was used to build a fracturing-production integrated numerical model of shale gas well considering the two-phase flow of gas and water.The model accounts for the influence of natural fractures and matrix properties on the fracturing process and directly applies post-fracturing formation pressure and water saturation distribution to subsequent well shut-in and production simulation,allowing for a more accurate fracturing-production integrated simulation.The results show that the reservoir physical properties have great impacts on fracture propagation,and the reasonable prediction of formation pressure and reservoir fluid distribution after the fracturing is critical to accurately predict the gas and fluid production of the shale gas wells.Compared with the conventional method,the proposed model can more accurately simulate the water and gas production by considering the impact of fracturing on both matrix pressure and water saturation.The established model is applied to the integrated fracturing-production simulation of practical horizontal shale gas wells.The simulation results are in good agreement with the practical production data,thus verifying the accuracy of the model.
基金This research was funded by the Research on Rapid Modeling Methods for Integrated Energy Systems,Grant No.SGTYHT/17-JS-204.
文摘A modeling method of regional integrated energy system based on bus method and transient simulation is proposed,and the system optimization is based on the dynamic balance of supply and demand in the whole year energy supply cycle.A CCHP systemof gas turbine coupled with ground source heat pump and electric refrigeration unit is constructed.The energy relationship of the systemis described by bus structure,and the transient calculationmodel is built on TRNSYS platform.The weighted sum of annual total cost saving rate,primary energy saving rate and environmental pollutant shadow cost saving rate is taken as the optimized objective function,and on the basis of annual dynamic balance,the Hooke-Jeeves algorithm is used for optimization of the system configuration.A complex commercial area in Beijing is taken as an example,and different weighting coefficients are set for optimization of the system configuration.The results show that,from the perspective of economy,environmental benefit and primary energy consumption,performance of the system increases and then decreases with rise of gas turbine power;under the simulated cooling/heating load,the maximum number of optimum configuration is seen in the combination of 35 kW gas turbine+723 kW GSHP and 1178 kW electric chiller;in comparison with traditional distributed system,the annual cost saving rate,primary energy saving rate and environmental pollutant shadow cost saving rate of the system are 29.4%,49.6%and 58.2%,respectively.
