Shale gas, as a clean, low-carbon, and abundant unconventional natural gas resource, plays a crucial role in achieving clean energy transformation and carbon neutrality. The Fuling shale gas reservoir in Sichuan Basin...Shale gas, as a clean, low-carbon, and abundant unconventional natural gas resource, plays a crucial role in achieving clean energy transformation and carbon neutrality. The Fuling shale gas reservoir in Sichuan Basin stands out as China's most promising area for shale gas exploration and recovery. However, the continuous recovery of shale gas in the southern Sichuan Basin has led to well interference events in hundreds of wells, with the furthest well distance reaching over 2000 m. This study introduces a multi-scale approach for transient analysis of a multi-well horizontal pad with well interference in shale gas reservoirs. The approach utilizes Laplace transform technology, boundary element theory, and the finite difference method to address the complexities of the system. Well interference is managed using the pressure superposition principle. To validate the proposed multi-scale method, a commercial numerical simulator is employed. The comprehensive pressure behavior of a multi-well horizontal pad in a shale gas reservoir is analyzed, encompassing wellbore storage effect, skin effect, bilinear flow, linear flow, pseudo-radial flow of primary fractures, well interference period, dual-porosity flow, pseudo-radial flow of the total system, and boundary-dominated flow. A case study is conducted on the typical well, the well with the longest production history in the Fuling shale gas reservoir. The rate transient analysis is conducted to integrate up to 229 days of shale gas production daily data and wellhead pressure data, enabling the generation of pressure behavior under unit flow rate. The results indicate that the linear flow, transitional flow, and boundary-dominated flow are more likely to be observed in the actual data. Secondary fractures are considered to be the primary pathways for fluid migration during well interference events. The evaluated formation permeability is 2.58 × 10^(-2) mD, the well spacing is 227.8 m, the diffusion coefficient is 1.49 × 10^(-4), and the skin factor is 0.09.展开更多
Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer ...Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.展开更多
Self-vibrating systems comprised of active materials have great potential for application in the fields of energy harvesting,actuation,bionic instrumentation,and autonomous robotics.However,it is challenging to obtain...Self-vibrating systems comprised of active materials have great potential for application in the fields of energy harvesting,actuation,bionic instrumentation,and autonomous robotics.However,it is challenging to obtain analytical solutions describing these systems,which hinders analysis and design.In this work,we propose a self-vibrating liquid crystal elastomer(LCE)fiber-spring system exposed to spatially-constant gradient light,and determine analytical solutions for its amplitude and period.First,using a dynamic model of LCE,we obtain the equations governing the self-vibration.Then,we analyze two different motion states and elucidate the mechanism of self-vibration.Subsequently,we derive analytical solutions for the amplitude and frequency using the multi-scale method,and compare the solutions with numerical results.The analytical outcomes are shown to be consistent with the numerical calculations,while taking far less computational time.Our findings reveal the utility of the multi-scale method in describing self-vibration,which may contribute to more efficient and accurate analyses of self-vibrating systems.展开更多
A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D F...A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D FEM of 7 nodes and 10 nodes are constructed based on the basic formula. Using these proposed elements, the multiscale numerical model for foundation subjected to harmonic periodic load, the foundation model excited by external and internal dynamic load are studied. The results show the pro- posed finite elements have higher precision than the tradi- tional elements with 4 nodes. The proposed finite elements can describe the propagation of stress waves well whenever the foundation model excited by extemal or intemal dynamic load. The proposed finite elements can be also used to con- nect the multi-scale elements. And the proposed finite elements also have high precision to make multi-scale analysis for structure.展开更多
A straightforward multi-scale boundary element method is proposed for global and local mechanical analysis of heterogeneous material.The method is more accurate and convenient than finite element based multi-scale met...A straightforward multi-scale boundary element method is proposed for global and local mechanical analysis of heterogeneous material.The method is more accurate and convenient than finite element based multi-scale method.The formulations of this method are derived by combining the homogenization approach and the fundamental equations of boundary element method.The solution gives the convenient formulations to compute global elastic constants and the local stress field.Finally,two numerical examples of porous material are presented to prove the accuracy and the efficiency of the proposed method.The results show that the method does not require the iteration to obtain the solution of the displacement in micro level.展开更多
This work presents a novel approach to achieve nonlinear vibration response based on the Hamilton principle.We chose the 5-MW reference wind turbine which was established by the National Renewable Energy Laboratory(NR...This work presents a novel approach to achieve nonlinear vibration response based on the Hamilton principle.We chose the 5-MW reference wind turbine which was established by the National Renewable Energy Laboratory(NREL),to research the effects of the nonlinear flap-wise vibration characteristics.The turbine wheel is simplified by treating the blade of a wind turbine as an Euler-Bernoulli beam,and the nonlinear flap-wise vibration characteristics of the wind turbine blades are discussed based on the simplification first.Then,the blade’s large-deflection flap-wise vibration governing equation is established by considering the nonlinear term involving the centrifugal force.Lastly,it is truncated by the Galerkin method and analyzed semi-analytically using the multi-scale analysis method,and numerical simulations are carried out to compare the simulation results of finite elements with the numerical simulation results using Campbell diagram analysis of blade vibration.The results indicated that the rotational speed of the impeller has a significant impact on blade vibration.When the wheel speed of 12.1 rpm and excitation amplitude of 1.23 the maximum displacement amplitude of the blade has increased from 0.72 to 3.16.From the amplitude-frequency curve,it can be seen that the multi-peak characteristic of blade amplitude frequency is under centrifugal nonlinearity.Closed phase trajectories in blade nonlinear vibration,exhibiting periodic motion characteristics,are found through phase diagrams and Poincare section diagrams.展开更多
The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and dispos...The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and disposing of this mining waste.This study employs a macro-meso-micro testing method to investigate the effects of the waste rock grading index(WGI)and loading rate(LR)on the uniaxial compressive strength(UCS),pore structure,and micromorphology of CTWB materials.Pore structures were analyzed using scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP).The particles(pores)and cracks analysis system(PCAS)software was used to quantitatively characterize the multi-scale micropores in the SEM images.The key findings indicate that the macroscopic results(UCS)of CTWB materials correspond to the microscopic results(pore structure and micromorphology).Changes in porosity largely depend on the conditions of waste rock grading index and loading rate.The inclusion of waste rock initially increases and then decreases the UCS,while porosity first decreases and then increases,with a critical waste rock grading index of 0.6.As the loading rate increases,UCS initially rises and then falls,while porosity gradually increases.Based on MIP and SEM results,at waste rock grading index 0.6,the most probable pore diameters,total pore area(TPA),pore number(PN),maximum pore area(MPA),and area probability distribution index(APDI)are minimized,while average pore form factor(APF)and fractal dimension of pore porosity distribution(FDPD)are maximized,indicating the most compact pore structure.At a loading rate of 12.0 mm/min,the most probable pore diameters,TPA,PN,MPA,APF,and APDI reach their maximum values,while FDPD reaches its minimum value.Finally,the mechanism of CTWB materials during compression is analyzed,based on the quantitative results of UCS and porosity.The research findings play a crucial role in ensuring the successful application of CTWB materials in deep metal mines.展开更多
Rock slope instability is a prevalent geological hazard that imposes significant adverse impacts on engineering activities.Although existing studies have focused on homogeneous rock slopes,the theoretical models for q...Rock slope instability is a prevalent geological hazard that imposes significant adverse impacts on engineering activities.Although existing studies have focused on homogeneous rock slopes,the theoretical models for quantifying the stability of softhard interbedded anti-inclined slopes remain underdeveloped,primarily due to the complex force transfer mechanisms involved.This study proposed a novel theoretical model for the stability analysis of soft-hard interbedded anti-inclined slopes under rainfall conditions.The framework models stratified rock layers as layered cantilever beams with material heterogeneity.Based on the principle of deformation compatibility,it comprehensively accounted for interlayer force transfer and strength degradation resulting from differential deformations among rock layers.Furthermore,it integrated the critical instability length induced by the self-weight of rock layers to determine the fracture depth.The proposed method was validated against engineering case studies and physical model tests,with error falling within an acceptable range.Compared to existing theoretical methods,the proposed method provided a more realistic representation of the slope's stress field.The analysis results demonstrate that rainfall not only reduces the inclination angle of the failure surface but also leads to an approximate 30%decrease in the safety factor.The proposed theoretical model is particularly useful for quickly calculating the stability of soft-hard interbedded anti-inclined rock slope under rainfall conditions,compared to complex and time-consuming numerical simulation calculations.展开更多
Uncertain parameters are widespread in engineering systems.This study investigates the modal analysis of a fluid-conveying pipe subjected to elastic supports with unknown-but-bound parameters.The governing equation fo...Uncertain parameters are widespread in engineering systems.This study investigates the modal analysis of a fluid-conveying pipe subjected to elastic supports with unknown-but-bound parameters.The governing equation for the elastically supported fluid-conveying pipe is transformed into ordinary differential equations using the Galerkin truncation method.The Chebyshev interval approach,integrated with the assumed mode method is then used to investigate the effects of uncertainties of support stiffness,fluid speed,and pipe length on the natural frequencies and mode shapes of the pipe.Additionally,both symmetrical and asymmetrical support stiffnesses are discussed.The accuracy and effectiveness of the Chebyshev interval approach are verified through comparison with the Monte Carlo method.The results reveal that,for the same deviation coefficient,uncertainties in symmetrical support stiffness have a greater impact on the first four natural frequencies than those of the asymmetrical one.There may be significant differences in the sensitivity of natural frequencies and mode shapes of the same order to uncertain parameters.Notably,mode shapes susceptible to uncertain parameters exhibit wider fluctuation intervals near the elastic supports,requiring more attention.展开更多
This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is e...This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is employed to analyze the stability of 3D anisotropic soil slopes.The accuracy of the proposed method is first verified against the data in the literature.We then simulate the 3D soil slope with a straight slope surface and the convex and concave slope surfaces with a 90turning corner to study the 3D effect on slope stability and the failure mechanism under anisotropy conditions.Based on our numerical results,the end effect significantly impacts the failure mechanism and safety factor.Anisotropy degree notably affects the safety factor,with higher degrees leading to deeper landslides.For concave slopes,they can be approximated by straight slopes with suitable boundary conditions to assess their stability.Furthermore,a case study of the Saint-Alban test embankment A in Quebec,Canada,is provided to demonstrate the applicability of the proposed FE model.展开更多
Efficient and accurate strength analysis of bolted connections is essential in analyzing the integral thermal protection system（ITPS） of hypersonic vehicles, since the system bears severe loads and structural failur...Efficient and accurate strength analysis of bolted connections is essential in analyzing the integral thermal protection system（ITPS） of hypersonic vehicles, since the system bears severe loads and structural failures usually occur at the connections. Investigations of composite mechanical properties used in ITPS are still in progress as the architecture of the composites is complex. A new method is proposed in this paper for strength analysis of bolted connections by investigating the elastic behavior and failure strength of three-dimensional C/C orthogonal composites used in ITPS. In this method a multi-scale finite element method incorporating the global–local method is established to ensure high efficiency in macro-scale and precision in meso-scale in analysis.Simulation results reveal that predictions of material properties show reasonable accuracy compared with test results. And the multi-scale method can analyze the strength of connections efficiently and accurately.展开更多
Prediction of melt index （MI）, the most important parameter in determining the product＇s grade and quality control of polypropylene produced in practical industrial processes, is studied. A novel soft-sensor model ...Prediction of melt index （MI）, the most important parameter in determining the product＇s grade and quality control of polypropylene produced in practical industrial processes, is studied. A novel soft-sensor model with principal component analysis （PCA）, radial basis function （RBF） networks, and multi-scale analysis （MSA） is proposed to infer the MI of manufactured products from real process variables, where PCA is carried out to select the most relevant process features and to eliminate the correlations of the input variables, MSA is introduced to a^quire much more information and to reduce the uncertainty of the system, and RBF networks are used to characterize the nonlinearity of the process. The research results show that the proposed method provides promising prediction reliability and accuracy, and supposed to have extensive application prospects in propylene polymerization processes.展开更多
With Beijing Huilongguan Sports and Cultural Park as the research object,this study was conducted to investigate public service satisfaction in the park by the Importance-Performance Analysis(IPA)method.A questionnair...With Beijing Huilongguan Sports and Cultural Park as the research object,this study was conducted to investigate public service satisfaction in the park by the Importance-Performance Analysis(IPA)method.A questionnaire covering six dimensions,including public transportation,sanitation and environment,and supporting facility construction,was designed.A total of 208 valid samples were collected,and SPSS was employed for reliability and validity tests as well as IPA analysis.The findings were as follows:①Visitors were generally quite satisfied with the overall public services in Huilongguan Sports and Cultural Park.②The highest satisfaction levels were observed in sanitation and environment services and the sports and cultural atmosphere,while lower satisfaction was noted for supporting facility construction and public information services.③The advantage enhancement zone includes sanitation and environment services and sports and cultural atmosphere;and the continuous maintenance zone includes public transportation services and security management amd maintenance;the subsequent opportunity zone includes supporting facility construction and public information services;and there are no dimensions in the urgent improvement zone.The study recommends strengthening the service connotations from three aspects:enhancing facilities with sports as the core,optimizing services with a people-centered approach,and upgrading the information platform through technological efficiency.Additionally,a multi-stakeholder collaborative mechanism involving the government in coordinating policy resources,the operator in improving implementation efficiency,and the public participating in supervision and evaluation is proposed to drive the enhancement of public service quality at Huilongguan Sports and Cultural Park.展开更多
To study the uncertainty quantification of resonant states in open quantum systems,we developed a Bayesian framework by integrating a reduced basis method(RBM)emulator with the Gamow coupled-channel(GCC)approach.The R...To study the uncertainty quantification of resonant states in open quantum systems,we developed a Bayesian framework by integrating a reduced basis method(RBM)emulator with the Gamow coupled-channel(GCC)approach.The RBM,constructed via eigenvector continuation and trained on both bound and resonant configurations,enables the fast and accurate emulation of resonance properties across the parameter space.To identify the physical resonant states from the emulator’s output,we introduce an overlap-based selection technique that effectively isolates true solutions from background artifacts.By applying this framework to unbound nucleus ^(6)Be,we quantified the model uncertainty in the predicted complex energies.The results demonstrate relative errors of 17.48%in the real part and 8.24%in the imaginary part,while achieving a speedup of four orders of magnitude compared with the full GCC calculations.To further investigate the asymptotic behavior of the resonant-state wavefunctions within the RBM framework,we employed a Lippmann–Schwinger(L–S)-based correction scheme.This approach not only improves the consistency between eigenvalues and wavefunctions but also enables a seamless extension from real-space training data to the complex energy plane.By bridging the gap between bound-state and continuum regimes,the L–S correction significantly enhances the emulator’s capability to accurately capture continuum structures in open quantum systems.展开更多
Objective:This study aims to explore the benefit analysis of the same disease in different departments of public hospitals under the DIP payment method.Methods:This study is a retrospective analysis that selected clin...Objective:This study aims to explore the benefit analysis of the same disease in different departments of public hospitals under the DIP payment method.Methods:This study is a retrospective analysis that selected clinical data from patients who received treatment in the Department of Orthopedics and the Department of Acupuncture and Moxibustion at our hospital from January 1,2023,to December 31,2023.The study compared the costs of medications,examinations,treatments,laboratory tests,nursing and other expenses,and total treatment costs between the two departments.It analyzed the cost structure of the two departments and proposed further improvement suggestions.Results:The study results indicated that the total costs in the Department of Acupuncture and Moxibustion were significantly higher than those in the Department of Orthopedics.Among medication costs,the total medication costs in the Department of Orthopedics were higher than those in the Department of Acupuncture and Moxibustion,with costs for Western medicine,proprietary Chinese medicine,and herbal medicine all being higher(p<0.05).Regarding examination costs,consultation fees in the Department of Orthopedics were lower than those in the Department of Acupuncture and Moxibustion,while examination costs were higher(p<0.05).In terms of treatment costs,orthopedic treatment and surgical fees were higher than those in the Department of Acupuncture and Moxibustion(p<0.05).For laboratory test costs,orthopedic laboratory fees were significantly higher than those in the Department of Acupuncture and Moxibustion(p<0.05).Among nursing and other expenses,orthopedic blood transfusion,bed fees,and other expenses were higher than those in the Department of Acupuncture and Moxibustion,while nursing fees were lower(p<0.05).Conclusion:Treatment fees in the Department of Acupuncture and Moxibustion are the core and account for a relatively high proportion of the total costs.The benefits generated by the Department of Orthopedics are primarily derived from medication,examination,and laboratory fees,aligning with the characteristics of combining diagnosis,medication,and surgical intervention in orthopedic treatment.Consultation fees,nursing fees,and bed fees in the Department of Acupuncture and Moxibustion are higher than those in the Department of Orthopedics,indicating a longer treatment cycle in acupuncture,which warrants clinical attention.展开更多
The incremental capacity analysis(ICA)technique is notably limited by its sensitivity to variations in charging conditions,which constrains its practical applicability in real-world scenarios.This paper introduces an ...The incremental capacity analysis(ICA)technique is notably limited by its sensitivity to variations in charging conditions,which constrains its practical applicability in real-world scenarios.This paper introduces an ICA-compensation technique to address this limitation and propose a generalized framework for assessing the state of health(SOH)of batteries based on ICA that is applicable under differing charging conditions.This novel approach calculates the voltage profile under quasi-static conditions by subtracting the voltage increase attributable to the additional polarization effects at high currents from the measured voltage profile.This approach's efficacy is contingent upon precisely acquiring the equivalent impedance.To obtain the equivalent impedance throughout the batteries'lifespan while minimizing testing costs,this study employs a current interrupt technique in conjunction with a long short-term memory(LSTM)network to develop a predictive model for equivalent impedance.Following the derivation of ICA curves using voltage profiles under quasi-static conditions,the research explores two scenarios for SOH estimation:one utilizing only incremental capacity(IC)features and the other incorporating both IC features and IC sampling.A genetic algorithm-optimized backpropagation neural network(GABPNN)is employed for the SOH estimation.The proposed generalized framework is validated using independent training and test datasets.Variable test conditions are applied for the test set to rigorously evaluate the methodology under challenging conditions.These evaluation results demonstrate that the proposed framework achieves an estimation accuracy of 1.04%for RMSE and 0.90%for MAPE across a spectrum of charging rates ranging from 0.1 C to 1 C and starting SOCs between 0%and 70%,which constitutes a major advancement compared to established ICA methods.It also significantly enhances the applicability of conventional ICA techniques in varying charging conditions and negates the necessity for separate testing protocols for each charging scenario.展开更多
This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-...This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-oped using the material point method.To reduce the computational cost of Monte Carlo simulations,response surface models are created as surrogate models for the material point system to approximate its dynamic behavior.An adaptive randomized greedy algorithm is employed to construct a sparse polynomial chaos expansion model with a fixed order,effectively balancing the accuracy and computational efficiency of the surrogate model.Based on the sparse polynomial chaos expansion,sensitivity analysis is conducted using the global finite difference and Sobol methods.Several examples of structural dynamics are provided to demonstrate the effectiveness of the proposed method in addressing structural dynamics problems.展开更多
To address the deficiency in loss diagnostic methods for turbines working at off-design angles of attack,a novel loss decomposition method suitable for cascade flow with large separation is proposed.The method propose...To address the deficiency in loss diagnostic methods for turbines working at off-design angles of attack,a novel loss decomposition method suitable for cascade flow with large separation is proposed.The method proposed has the following advantages over existing methods:(A)It enables refined loss decomposition for cascade flows,capable of identifying the spatial range of specific regions such as shear layers and backflow regions,thereby obtaining the loss characteristics of these regions.(B)The region identification criteria in this method have clear physical meanings,rather than relying on arbitrary area division.(C)The method has good applicability and is suitable for cascade flows under various angles of attack.Validation shows that this method achieves satisfactory results.Based on this method,the loss mechanisms of a low-pressure turbine cascade at a low Reynolds number of 4.3×10^(4)and angles of attack of-5°,-20°,and-45°are investigated using Large Eddy Simulations(LESs).Entropy analysis quantitatively demonstrates significant differences in the composition of losses among flow regions,due to their different flow characteristics.From the perspective of flow regions,wake loss dominates total loss,while loss in backflow region is negligible.Furthermore,the variation mechanisms of loss with incidence differ among different flow regions.展开更多
In the diagnosis of rotor crack based on wavelet analysis, it is a painful task to find out an adaptive mother wavelet as many of them can be chosen and the analytic results of different mother wavelets are yet not th...In the diagnosis of rotor crack based on wavelet analysis, it is a painful task to find out an adaptive mother wavelet as many of them can be chosen and the analytic results of different mother wavelets are yet not the same. For this limitation of wavelet analysis, a novel diagnostic approach of rotor crack based on multi-scale singular-spectrum analysis （MS-SSA） is proposed. Firstly, a Jeffcott model of a cracked rotor is developed and the forth-order Runge-Kutta method is used to solve the motion equations of this rotor to obtain its time response （signals）. Secondly, a comparatively simple approach of MS-SSA is presented and the empirical orthogonal functions of different orders in various scales are regarded as analyzing functions. At last, the signals of the cracked rotor and an uncracked rotor are analyzed using the proposed approach of MS-SSA, and the simulative results are compared. The results show that, the data-adaptive analyzing functions can capture many features of signals and the rotor crack can be identified and diagnosed effectively by comparing the analytic results of signals of the cracked rotor with those of the uncracked rotor using the analyzing functions of different orders.展开更多
The trade-offs and synergies of forest ecosystem service are important research topics for several disciplines.The multi-scale analysis of service trade-offs and synergies assists in the implementation of more effecti...The trade-offs and synergies of forest ecosystem service are important research topics for several disciplines.The multi-scale analysis of service trade-offs and synergies assists in the implementation of more effective forest resource management.Based on multi-source data including forest distribution,topography,NDVI,meteorology and soil conditions,key forest ecosystem services,including total forest volume,carbon storage,water yield,soil retention and habitat quality were mapped and evaluated for the Funiu Mountain Region through integrated deployment of the CASA model,the InVEST3.2 model and the ArcGIS10.2 software.The characteristics of trade-offs and synergies among different ecosystem services were then mapped and considered across multiple spatial scales(i.e.,by region,north and south slopes,vertical belt)using the spatial overlay analysis method.The main results are as follows:(1)Mean forest volume is 49.26 m^(3)/ha,carbon density is 156.94 t/ha,water yield depth is 494.46 mm,the unit amount of soil retention is 955.4 t/ha,and the habitat quality index is 0.79.(2)The area of forests with good synergy is 28.79%,and the area of forests with poor synergy is 10.15%,while about 61.06%of forests show severe trade-offs and weak trade-offs.The overall benefits of forest ecosystem services in the study area are still low.In the future,bad synergy and severe trade-off areas should be the focus of forest resource management and efficiency regulation.(3)Synergy between ecosystem services is better for forest on south slope than that on north slope.Deciduous broad-leaved forest belt at moderate elevations on south slope in the mountains(SIII)has the highest synergies,while that at low elevations on north slope(NI)exhibits the lowest synergy levels.展开更多
基金support from the National Natural Science Foundation of China(12202042)the Fundamental Research Funds for the Central Universities(QNXM20220011,FRF-TP-22-119A1,FRF-IDRY-22-001)+2 种基金the Open Fund Project of Sinopec State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development(33550000-22-ZC0613-0269)China Postdoctoral Science Foundations(2021M700391)High-end Foreign Expert Introduction Program(G2023105006L).
文摘Shale gas, as a clean, low-carbon, and abundant unconventional natural gas resource, plays a crucial role in achieving clean energy transformation and carbon neutrality. The Fuling shale gas reservoir in Sichuan Basin stands out as China's most promising area for shale gas exploration and recovery. However, the continuous recovery of shale gas in the southern Sichuan Basin has led to well interference events in hundreds of wells, with the furthest well distance reaching over 2000 m. This study introduces a multi-scale approach for transient analysis of a multi-well horizontal pad with well interference in shale gas reservoirs. The approach utilizes Laplace transform technology, boundary element theory, and the finite difference method to address the complexities of the system. Well interference is managed using the pressure superposition principle. To validate the proposed multi-scale method, a commercial numerical simulator is employed. The comprehensive pressure behavior of a multi-well horizontal pad in a shale gas reservoir is analyzed, encompassing wellbore storage effect, skin effect, bilinear flow, linear flow, pseudo-radial flow of primary fractures, well interference period, dual-porosity flow, pseudo-radial flow of the total system, and boundary-dominated flow. A case study is conducted on the typical well, the well with the longest production history in the Fuling shale gas reservoir. The rate transient analysis is conducted to integrate up to 229 days of shale gas production daily data and wellhead pressure data, enabling the generation of pressure behavior under unit flow rate. The results indicate that the linear flow, transitional flow, and boundary-dominated flow are more likely to be observed in the actual data. Secondary fractures are considered to be the primary pathways for fluid migration during well interference events. The evaluated formation permeability is 2.58 × 10^(-2) mD, the well spacing is 227.8 m, the diffusion coefficient is 1.49 × 10^(-4), and the skin factor is 0.09.
基金Opening Foundation of Key Laboratory of Explosive Energy Utilization and Control,Anhui Province(BP20240104)Graduate Innovation Program of China University of Mining and Technology(2024WLJCRCZL049)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_2701)。
文摘Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.
基金supported by the National Natural Science Foundation of China(No.12172001)the University Natural Science Research Project of Anhui Province(No.2022AH020029)+1 种基金the Anhui Provincial Natural Science Foundation(Nos.2208085Y01 and 2008085QA23)the Housing and Urban-Rural Development Science and Technology Project of Anhui Province(No.2023-YF129),China.
文摘Self-vibrating systems comprised of active materials have great potential for application in the fields of energy harvesting,actuation,bionic instrumentation,and autonomous robotics.However,it is challenging to obtain analytical solutions describing these systems,which hinders analysis and design.In this work,we propose a self-vibrating liquid crystal elastomer(LCE)fiber-spring system exposed to spatially-constant gradient light,and determine analytical solutions for its amplitude and period.First,using a dynamic model of LCE,we obtain the equations governing the self-vibration.Then,we analyze two different motion states and elucidate the mechanism of self-vibration.Subsequently,we derive analytical solutions for the amplitude and frequency using the multi-scale method,and compare the solutions with numerical results.The analytical outcomes are shown to be consistent with the numerical calculations,while taking far less computational time.Our findings reveal the utility of the multi-scale method in describing self-vibration,which may contribute to more efficient and accurate analyses of self-vibrating systems.
基金supported by the National Natural Science Foundation of China (51109029,51178081,51138001,and 51009020)the State Key Development Program for Basic Research of China (2013CB035905)
文摘A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D FEM of 7 nodes and 10 nodes are constructed based on the basic formula. Using these proposed elements, the multiscale numerical model for foundation subjected to harmonic periodic load, the foundation model excited by external and internal dynamic load are studied. The results show the pro- posed finite elements have higher precision than the tradi- tional elements with 4 nodes. The proposed finite elements can describe the propagation of stress waves well whenever the foundation model excited by extemal or intemal dynamic load. The proposed finite elements can be also used to con- nect the multi-scale elements. And the proposed finite elements also have high precision to make multi-scale analysis for structure.
基金Supported by the National Natural Science Foundation of China(51105195,51075204)the Aeronautical Science Foundation of China(2011ZB52024)
文摘A straightforward multi-scale boundary element method is proposed for global and local mechanical analysis of heterogeneous material.The method is more accurate and convenient than finite element based multi-scale method.The formulations of this method are derived by combining the homogenization approach and the fundamental equations of boundary element method.The solution gives the convenient formulations to compute global elastic constants and the local stress field.Finally,two numerical examples of porous material are presented to prove the accuracy and the efficiency of the proposed method.The results show that the method does not require the iteration to obtain the solution of the displacement in micro level.
基金supported by the National Natural Science Foundation of China(No.51965034).
文摘This work presents a novel approach to achieve nonlinear vibration response based on the Hamilton principle.We chose the 5-MW reference wind turbine which was established by the National Renewable Energy Laboratory(NREL),to research the effects of the nonlinear flap-wise vibration characteristics.The turbine wheel is simplified by treating the blade of a wind turbine as an Euler-Bernoulli beam,and the nonlinear flap-wise vibration characteristics of the wind turbine blades are discussed based on the simplification first.Then,the blade’s large-deflection flap-wise vibration governing equation is established by considering the nonlinear term involving the centrifugal force.Lastly,it is truncated by the Galerkin method and analyzed semi-analytically using the multi-scale analysis method,and numerical simulations are carried out to compare the simulation results of finite elements with the numerical simulation results using Campbell diagram analysis of blade vibration.The results indicated that the rotational speed of the impeller has a significant impact on blade vibration.When the wheel speed of 12.1 rpm and excitation amplitude of 1.23 the maximum displacement amplitude of the blade has increased from 0.72 to 3.16.From the amplitude-frequency curve,it can be seen that the multi-peak characteristic of blade amplitude frequency is under centrifugal nonlinearity.Closed phase trajectories in blade nonlinear vibration,exhibiting periodic motion characteristics,are found through phase diagrams and Poincare section diagrams.
基金Project(2022YFC2904103)supported by the National Key Research and Development Program of ChinaProjects(52374112,52274108)supported by the National Natural Science Foundation of China+1 种基金Projects(BX20220036,BX20230041)supported by the Postdoctoral Innovation Talents Support Program,ChinaProject(2232080)supported by the Beijing Natural Science Foundation,China。
文摘The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and disposing of this mining waste.This study employs a macro-meso-micro testing method to investigate the effects of the waste rock grading index(WGI)and loading rate(LR)on the uniaxial compressive strength(UCS),pore structure,and micromorphology of CTWB materials.Pore structures were analyzed using scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP).The particles(pores)and cracks analysis system(PCAS)software was used to quantitatively characterize the multi-scale micropores in the SEM images.The key findings indicate that the macroscopic results(UCS)of CTWB materials correspond to the microscopic results(pore structure and micromorphology).Changes in porosity largely depend on the conditions of waste rock grading index and loading rate.The inclusion of waste rock initially increases and then decreases the UCS,while porosity first decreases and then increases,with a critical waste rock grading index of 0.6.As the loading rate increases,UCS initially rises and then falls,while porosity gradually increases.Based on MIP and SEM results,at waste rock grading index 0.6,the most probable pore diameters,total pore area(TPA),pore number(PN),maximum pore area(MPA),and area probability distribution index(APDI)are minimized,while average pore form factor(APF)and fractal dimension of pore porosity distribution(FDPD)are maximized,indicating the most compact pore structure.At a loading rate of 12.0 mm/min,the most probable pore diameters,TPA,PN,MPA,APF,and APDI reach their maximum values,while FDPD reaches its minimum value.Finally,the mechanism of CTWB materials during compression is analyzed,based on the quantitative results of UCS and porosity.The research findings play a crucial role in ensuring the successful application of CTWB materials in deep metal mines.
基金supported by the Chongqing Water Conservancy Science and Technology Project(grant number:CQSLK-202329)the Natural Science Foundation of Chongqing,China(grant number:CSTB2022NSCQ-MSX0991)+1 种基金the National Natural Science Foundation of China(grant number:52378327)the Chongqing Natural Science Foundation Innovation Development Joint Fund(grant number:CSTB2022NSCQ-LZX0049)。
文摘Rock slope instability is a prevalent geological hazard that imposes significant adverse impacts on engineering activities.Although existing studies have focused on homogeneous rock slopes,the theoretical models for quantifying the stability of softhard interbedded anti-inclined slopes remain underdeveloped,primarily due to the complex force transfer mechanisms involved.This study proposed a novel theoretical model for the stability analysis of soft-hard interbedded anti-inclined slopes under rainfall conditions.The framework models stratified rock layers as layered cantilever beams with material heterogeneity.Based on the principle of deformation compatibility,it comprehensively accounted for interlayer force transfer and strength degradation resulting from differential deformations among rock layers.Furthermore,it integrated the critical instability length induced by the self-weight of rock layers to determine the fracture depth.The proposed method was validated against engineering case studies and physical model tests,with error falling within an acceptable range.Compared to existing theoretical methods,the proposed method provided a more realistic representation of the slope's stress field.The analysis results demonstrate that rainfall not only reduces the inclination angle of the failure surface but also leads to an approximate 30%decrease in the safety factor.The proposed theoretical model is particularly useful for quickly calculating the stability of soft-hard interbedded anti-inclined rock slope under rainfall conditions,compared to complex and time-consuming numerical simulation calculations.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272211,12072181,and 12121002).
文摘Uncertain parameters are widespread in engineering systems.This study investigates the modal analysis of a fluid-conveying pipe subjected to elastic supports with unknown-but-bound parameters.The governing equation for the elastically supported fluid-conveying pipe is transformed into ordinary differential equations using the Galerkin truncation method.The Chebyshev interval approach,integrated with the assumed mode method is then used to investigate the effects of uncertainties of support stiffness,fluid speed,and pipe length on the natural frequencies and mode shapes of the pipe.Additionally,both symmetrical and asymmetrical support stiffnesses are discussed.The accuracy and effectiveness of the Chebyshev interval approach are verified through comparison with the Monte Carlo method.The results reveal that,for the same deviation coefficient,uncertainties in symmetrical support stiffness have a greater impact on the first four natural frequencies than those of the asymmetrical one.There may be significant differences in the sensitivity of natural frequencies and mode shapes of the same order to uncertain parameters.Notably,mode shapes susceptible to uncertain parameters exhibit wider fluctuation intervals near the elastic supports,requiring more attention.
基金supported by the National Natural Science Foundation of China(Grant Nos.51890912,51979025 and 52011530189).
文摘This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is employed to analyze the stability of 3D anisotropic soil slopes.The accuracy of the proposed method is first verified against the data in the literature.We then simulate the 3D soil slope with a straight slope surface and the convex and concave slope surfaces with a 90turning corner to study the 3D effect on slope stability and the failure mechanism under anisotropy conditions.Based on our numerical results,the end effect significantly impacts the failure mechanism and safety factor.Anisotropy degree notably affects the safety factor,with higher degrees leading to deeper landslides.For concave slopes,they can be approximated by straight slopes with suitable boundary conditions to assess their stability.Furthermore,a case study of the Saint-Alban test embankment A in Quebec,Canada,is provided to demonstrate the applicability of the proposed FE model.
基金co-supported by the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe National Natural Science Foundation of China (No. 11302105)
文摘Efficient and accurate strength analysis of bolted connections is essential in analyzing the integral thermal protection system（ITPS） of hypersonic vehicles, since the system bears severe loads and structural failures usually occur at the connections. Investigations of composite mechanical properties used in ITPS are still in progress as the architecture of the composites is complex. A new method is proposed in this paper for strength analysis of bolted connections by investigating the elastic behavior and failure strength of three-dimensional C/C orthogonal composites used in ITPS. In this method a multi-scale finite element method incorporating the global–local method is established to ensure high efficiency in macro-scale and precision in meso-scale in analysis.Simulation results reveal that predictions of material properties show reasonable accuracy compared with test results. And the multi-scale method can analyze the strength of connections efficiently and accurately.
基金Supported by the National Natural Science Foundation of China (No. 20106008)National HI-TECH Industrialization Program of China (No. Fagai-Gaoji-2004-2080)Science Fund for Distinguished Young Scholars of Zhejiang University (No. 111000-581645).
文摘Prediction of melt index （MI）, the most important parameter in determining the product＇s grade and quality control of polypropylene produced in practical industrial processes, is studied. A novel soft-sensor model with principal component analysis （PCA）, radial basis function （RBF） networks, and multi-scale analysis （MSA） is proposed to infer the MI of manufactured products from real process variables, where PCA is carried out to select the most relevant process features and to eliminate the correlations of the input variables, MSA is introduced to a^quire much more information and to reduce the uncertainty of the system, and RBF networks are used to characterize the nonlinearity of the process. The research results show that the proposed method provides promising prediction reliability and accuracy, and supposed to have extensive application prospects in propylene polymerization processes.
基金Sponsored by The Youth Project of National Social Science Foundation of China(21CTY007)Special Fund for Basic Scientific Research Business Expenses of Central Universities(2024DAWH008).
文摘With Beijing Huilongguan Sports and Cultural Park as the research object,this study was conducted to investigate public service satisfaction in the park by the Importance-Performance Analysis(IPA)method.A questionnaire covering six dimensions,including public transportation,sanitation and environment,and supporting facility construction,was designed.A total of 208 valid samples were collected,and SPSS was employed for reliability and validity tests as well as IPA analysis.The findings were as follows:①Visitors were generally quite satisfied with the overall public services in Huilongguan Sports and Cultural Park.②The highest satisfaction levels were observed in sanitation and environment services and the sports and cultural atmosphere,while lower satisfaction was noted for supporting facility construction and public information services.③The advantage enhancement zone includes sanitation and environment services and sports and cultural atmosphere;and the continuous maintenance zone includes public transportation services and security management amd maintenance;the subsequent opportunity zone includes supporting facility construction and public information services;and there are no dimensions in the urgent improvement zone.The study recommends strengthening the service connotations from three aspects:enhancing facilities with sports as the core,optimizing services with a people-centered approach,and upgrading the information platform through technological efficiency.Additionally,a multi-stakeholder collaborative mechanism involving the government in coordinating policy resources,the operator in improving implementation efficiency,and the public participating in supervision and evaluation is proposed to drive the enhancement of public service quality at Huilongguan Sports and Cultural Park.
基金supported by the National Key Research and Development Program(MOST 2023YFA1606404 and MOST 2022YFA1602303)the National Natural Science Foundation of China(Nos.12347106,12147101,and 12447122)the China Postdoctoral Science Foundation(No.2024M760489).
文摘To study the uncertainty quantification of resonant states in open quantum systems,we developed a Bayesian framework by integrating a reduced basis method(RBM)emulator with the Gamow coupled-channel(GCC)approach.The RBM,constructed via eigenvector continuation and trained on both bound and resonant configurations,enables the fast and accurate emulation of resonance properties across the parameter space.To identify the physical resonant states from the emulator’s output,we introduce an overlap-based selection technique that effectively isolates true solutions from background artifacts.By applying this framework to unbound nucleus ^(6)Be,we quantified the model uncertainty in the predicted complex energies.The results demonstrate relative errors of 17.48%in the real part and 8.24%in the imaginary part,while achieving a speedup of four orders of magnitude compared with the full GCC calculations.To further investigate the asymptotic behavior of the resonant-state wavefunctions within the RBM framework,we employed a Lippmann–Schwinger(L–S)-based correction scheme.This approach not only improves the consistency between eigenvalues and wavefunctions but also enables a seamless extension from real-space training data to the complex energy plane.By bridging the gap between bound-state and continuum regimes,the L–S correction significantly enhances the emulator’s capability to accurately capture continuum structures in open quantum systems.
文摘Objective:This study aims to explore the benefit analysis of the same disease in different departments of public hospitals under the DIP payment method.Methods:This study is a retrospective analysis that selected clinical data from patients who received treatment in the Department of Orthopedics and the Department of Acupuncture and Moxibustion at our hospital from January 1,2023,to December 31,2023.The study compared the costs of medications,examinations,treatments,laboratory tests,nursing and other expenses,and total treatment costs between the two departments.It analyzed the cost structure of the two departments and proposed further improvement suggestions.Results:The study results indicated that the total costs in the Department of Acupuncture and Moxibustion were significantly higher than those in the Department of Orthopedics.Among medication costs,the total medication costs in the Department of Orthopedics were higher than those in the Department of Acupuncture and Moxibustion,with costs for Western medicine,proprietary Chinese medicine,and herbal medicine all being higher(p<0.05).Regarding examination costs,consultation fees in the Department of Orthopedics were lower than those in the Department of Acupuncture and Moxibustion,while examination costs were higher(p<0.05).In terms of treatment costs,orthopedic treatment and surgical fees were higher than those in the Department of Acupuncture and Moxibustion(p<0.05).For laboratory test costs,orthopedic laboratory fees were significantly higher than those in the Department of Acupuncture and Moxibustion(p<0.05).Among nursing and other expenses,orthopedic blood transfusion,bed fees,and other expenses were higher than those in the Department of Acupuncture and Moxibustion,while nursing fees were lower(p<0.05).Conclusion:Treatment fees in the Department of Acupuncture and Moxibustion are the core and account for a relatively high proportion of the total costs.The benefits generated by the Department of Orthopedics are primarily derived from medication,examination,and laboratory fees,aligning with the characteristics of combining diagnosis,medication,and surgical intervention in orthopedic treatment.Consultation fees,nursing fees,and bed fees in the Department of Acupuncture and Moxibustion are higher than those in the Department of Orthopedics,indicating a longer treatment cycle in acupuncture,which warrants clinical attention.
基金funded by the Bavarian State Ministry of ScienceResearch and Art(Grant number:H.2-F1116.WE/52/2)。
文摘The incremental capacity analysis(ICA)technique is notably limited by its sensitivity to variations in charging conditions,which constrains its practical applicability in real-world scenarios.This paper introduces an ICA-compensation technique to address this limitation and propose a generalized framework for assessing the state of health(SOH)of batteries based on ICA that is applicable under differing charging conditions.This novel approach calculates the voltage profile under quasi-static conditions by subtracting the voltage increase attributable to the additional polarization effects at high currents from the measured voltage profile.This approach's efficacy is contingent upon precisely acquiring the equivalent impedance.To obtain the equivalent impedance throughout the batteries'lifespan while minimizing testing costs,this study employs a current interrupt technique in conjunction with a long short-term memory(LSTM)network to develop a predictive model for equivalent impedance.Following the derivation of ICA curves using voltage profiles under quasi-static conditions,the research explores two scenarios for SOH estimation:one utilizing only incremental capacity(IC)features and the other incorporating both IC features and IC sampling.A genetic algorithm-optimized backpropagation neural network(GABPNN)is employed for the SOH estimation.The proposed generalized framework is validated using independent training and test datasets.Variable test conditions are applied for the test set to rigorously evaluate the methodology under challenging conditions.These evaluation results demonstrate that the proposed framework achieves an estimation accuracy of 1.04%for RMSE and 0.90%for MAPE across a spectrum of charging rates ranging from 0.1 C to 1 C and starting SOCs between 0%and 70%,which constitutes a major advancement compared to established ICA methods.It also significantly enhances the applicability of conventional ICA techniques in varying charging conditions and negates the necessity for separate testing protocols for each charging scenario.
基金support from the National Natural Science Foundation of China(Grant Nos.52174123&52274222).
文摘This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-oped using the material point method.To reduce the computational cost of Monte Carlo simulations,response surface models are created as surrogate models for the material point system to approximate its dynamic behavior.An adaptive randomized greedy algorithm is employed to construct a sparse polynomial chaos expansion model with a fixed order,effectively balancing the accuracy and computational efficiency of the surrogate model.Based on the sparse polynomial chaos expansion,sensitivity analysis is conducted using the global finite difference and Sobol methods.Several examples of structural dynamics are provided to demonstrate the effectiveness of the proposed method in addressing structural dynamics problems.
基金co-supported by the National Natural Science Foundation of China(No.52176033)the National Science and Technology Major Project,China(No.J2019-II-0012-0032)the Science Center for Gas Turbine Project,China(No.P2022-B-II-009-001)。
文摘To address the deficiency in loss diagnostic methods for turbines working at off-design angles of attack,a novel loss decomposition method suitable for cascade flow with large separation is proposed.The method proposed has the following advantages over existing methods:(A)It enables refined loss decomposition for cascade flows,capable of identifying the spatial range of specific regions such as shear layers and backflow regions,thereby obtaining the loss characteristics of these regions.(B)The region identification criteria in this method have clear physical meanings,rather than relying on arbitrary area division.(C)The method has good applicability and is suitable for cascade flows under various angles of attack.Validation shows that this method achieves satisfactory results.Based on this method,the loss mechanisms of a low-pressure turbine cascade at a low Reynolds number of 4.3×10^(4)and angles of attack of-5°,-20°,and-45°are investigated using Large Eddy Simulations(LESs).Entropy analysis quantitatively demonstrates significant differences in the composition of losses among flow regions,due to their different flow characteristics.From the perspective of flow regions,wake loss dominates total loss,while loss in backflow region is negligible.Furthermore,the variation mechanisms of loss with incidence differ among different flow regions.
基金This project is supported by National Fundamental Research and Development Project Foundation of China(No.G1998020321).
文摘In the diagnosis of rotor crack based on wavelet analysis, it is a painful task to find out an adaptive mother wavelet as many of them can be chosen and the analytic results of different mother wavelets are yet not the same. For this limitation of wavelet analysis, a novel diagnostic approach of rotor crack based on multi-scale singular-spectrum analysis （MS-SSA） is proposed. Firstly, a Jeffcott model of a cracked rotor is developed and the forth-order Runge-Kutta method is used to solve the motion equations of this rotor to obtain its time response （signals）. Secondly, a comparatively simple approach of MS-SSA is presented and the empirical orthogonal functions of different orders in various scales are regarded as analyzing functions. At last, the signals of the cracked rotor and an uncracked rotor are analyzed using the proposed approach of MS-SSA, and the simulative results are compared. The results show that, the data-adaptive analyzing functions can capture many features of signals and the rotor crack can be identified and diagnosed effectively by comparing the analytic results of signals of the cracked rotor with those of the uncracked rotor using the analyzing functions of different orders.
基金National Natural Science Foundation of China,No.41671090National Basic Research Program(973 Program),No.2015CB452702。
文摘The trade-offs and synergies of forest ecosystem service are important research topics for several disciplines.The multi-scale analysis of service trade-offs and synergies assists in the implementation of more effective forest resource management.Based on multi-source data including forest distribution,topography,NDVI,meteorology and soil conditions,key forest ecosystem services,including total forest volume,carbon storage,water yield,soil retention and habitat quality were mapped and evaluated for the Funiu Mountain Region through integrated deployment of the CASA model,the InVEST3.2 model and the ArcGIS10.2 software.The characteristics of trade-offs and synergies among different ecosystem services were then mapped and considered across multiple spatial scales(i.e.,by region,north and south slopes,vertical belt)using the spatial overlay analysis method.The main results are as follows:(1)Mean forest volume is 49.26 m^(3)/ha,carbon density is 156.94 t/ha,water yield depth is 494.46 mm,the unit amount of soil retention is 955.4 t/ha,and the habitat quality index is 0.79.(2)The area of forests with good synergy is 28.79%,and the area of forests with poor synergy is 10.15%,while about 61.06%of forests show severe trade-offs and weak trade-offs.The overall benefits of forest ecosystem services in the study area are still low.In the future,bad synergy and severe trade-off areas should be the focus of forest resource management and efficiency regulation.(3)Synergy between ecosystem services is better for forest on south slope than that on north slope.Deciduous broad-leaved forest belt at moderate elevations on south slope in the mountains(SIII)has the highest synergies,while that at low elevations on north slope(NI)exhibits the lowest synergy levels.
