The nonlinear traveling wave vibration of rotating ferromagnetic functionally graded(FG)cylindrical shells under multi-physics fields is investigated.Grounded in the Kirchhoff-Love thin shell theory,the geometric nonl...The nonlinear traveling wave vibration of rotating ferromagnetic functionally graded(FG)cylindrical shells under multi-physics fields is investigated.Grounded in the Kirchhoff-Love thin shell theory,the geometric nonlinearity is incorporated into the model,and the constitutive equations are derived.The physical parameters of functionally graded materials(FGMs),which exhibit continuous variation across the thickness gradient,are of particular interest.The nonlinear magneto-thermoelastic governing equations are derived in accord with Hamilton's principle.The nonlinear partial differential equations are discretized with the Galerkin method,and the analytical expression of traveling wave frequencies is derived with an approximate method.The accuracy of the proposed method is validated through the comparison with the results from the literature and numerical solutions.Finally,the visualization analyses are conducted to examine the effects of key parameters on the traveling wave frequencies.The results show that the factors including the power-law index,temperature,magnetic field intensity,and rotating speed have the coupling effects with respect to the nonlinear vibration behavior.展开更多
A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron micro...A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron microscopy(SEM)to observe the γ'phase.Additionally,phase field simulations were conducted to model the growth ofγ'precipitates during aging and analyze their morphological evolution.The experimental results demonstrated that the multistage solution treatment effectively eliminated eutectic phases and carbides.Moreover,samples aged for 10 min exhibited larger and more rectangularγ'precipitates compared with those aged for 5 min.Notably,secondary γ'precipitates were observed in samples subjected to water cooling.Two indices for quantifying rectangularization were proposed and successfully applied.Based on the simulation results,lattice mismatch induced coherency stresses and elevated stress triaxiality along the <111> direction contributed to the rectangularization of theγ'phase.展开更多
This study presents a new method to solve the difficult problem of precise machining a non-cylinder pinhole of a piston using embedded giant magnetostrictive material (GMM) in the component. We propose the finite elem...This study presents a new method to solve the difficult problem of precise machining a non-cylinder pinhole of a piston using embedded giant magnetostrictive material (GMM) in the component. We propose the finite element model of GMM smart component in electric, magnetic, and mechanical fields by step computation to optimize the design of GMM smart com-ponent. The proposed model is implemented by using COMSOL multi-physics V3.2a. The effects of the smart component on the deformation and the system resonance frequencies are studied. The results calculated by the model are in excellent agreement (relative errors are below 10%) with the experimental values.展开更多
An external electric field was applied on GH4169 superalloy during aging at 700℃ in order to study the hardness variation.The results indicate that the amount of vacancies in the matrix increase after electric field ...An external electric field was applied on GH4169 superalloy during aging at 700℃ in order to study the hardness variation.The results indicate that the amount of vacancies in the matrix increase after electric field treatment and some monovacancies changes into the vacancy clusters.Vacancy flow forms and the segregation of Fe and Cr atoms of the alloy generates because of the non-equilibrium distribution of electric field induced by the charged surfaces.Since the severe lattice distortion will occur at the local area,the specimen is hardened.展开更多
The smelting reduction process of the ilmenite in an electric arc furnace(EAF)is a commonly used technology for producing titanium slag in the world.It has particular significance to analyze the velocity-temperature-e...The smelting reduction process of the ilmenite in an electric arc furnace(EAF)is a commonly used technology for producing titanium slag in the world.It has particular significance to analyze the velocity-temperature-electromagnetics multi-physical field in an EAF for improving its productivity and reducing energy consumption.A transient three-dimensional mathematical model was developed to characterize the flow,heat transfer,and electromagnetic behavior in a titanium slag EAF.For describing the electromagnetic field and its effects on velocity and temperature distribution in the furnace,magnetohydrodynamic equations and conservation equations for mass,momentum,and energy were solved simultaneously by compiling the user-defined function program.The numerical model was verified by comparing with the literature data.The results indicate that the Lorentz force is the main driving force of the velocity and temperature distribution.Moreover,the influence of input current and location of electrodes on the multi-physical field distribution was also investigated.It is found that the appropriate range of input current and diameter of pitch circle are about 30,000 A and 3000-3500 mm,respectively.The mathematical model established can characterize the multi-physical field more accu-rately than before,which can provide valuable guidance for the operation improvement and design optimization of the EAF for producing titanium slag.展开更多
To accelerate the practicality of electromagnetic railguns,it is necessary to use a combination of threedimensional numerical simulation and experiments to study the mechanism of bore damage.In this paper,a three-dime...To accelerate the practicality of electromagnetic railguns,it is necessary to use a combination of threedimensional numerical simulation and experiments to study the mechanism of bore damage.In this paper,a three-dimensional numerical model of the augmented railgun with four parallel unconventional rails is introduced to simulate the internal ballistic process and realize the multi-physics field coupling calculation of the rail gun,and a test experiment of a medium-caliber electromagnetic launcher powered by pulse formation network(PFN)is carried out.Various test methods such as spectrometer,fiber grating and high-speed camera are used to test several parameters such as muzzle initial velocity,transient magnetic field strength and stress-strain of rail.Combining the simulation results and experimental data,the damage condition of the contact surface is analyzed.展开更多
A numerical model coupled with a multi-physical field based on dynamic formation of slag skin is established.After validation by comparing the experimental and simulation results of depth of metal pool,slag skin thick...A numerical model coupled with a multi-physical field based on dynamic formation of slag skin is established.After validation by comparing the experimental and simulation results of depth of metal pool,slag skin thickness and melt rate,it is utilized to investigate the effect of melt current on the coupled multi-physical field,slag skin thickness,metal pool depth and the heat flow distribution during electroslag remelting(ESR)Inconel 625 solidification process.The results showed that with the increase in the melt current,the velocities of ESR system and the temperature of metal pool increased,whereas the highest temperature of slag bath firstly decreased and then increased.With the increase in the melt current,the slag skin thickness,metal pool depth and melt rate increased.Furthermore,the characteristics of the heat flow distribution and the effect of melt current on the heat flow distribution were analysed.展开更多
A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet dur...A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet during the charging and discharging processes.The coupled problem is resolved by means of the finite element method(FEM)for the magneto-thermo-elastic behaviors and the Runge-Kutta method for the transient responses of the electrical circuits of the hybrid superconducting magnet system.The results reveal that the transient multi-physics responses of the insert NI coil primarily depend on the charging/discharging procedure of the hybrid magnet.Moreover,a reverse azimuthal current and a compressive hoop stress are induced in the insert NI coil during the charging process,while a forward azimuthal current and a tensile hoop stress are observed during the discharging process.The induced voltages in the insert NI coil can drive the currents flowing across the radial turns where the contact resistance exists.Therefore,it brings forth significant Joule heat,causing a temperature rise and a uniform distribution of this heat in the coil turns.Accordingly,a thermally/mechanically unstable or quenching event may be encountered when a high operating current is flowing in the insert NI coil.It is numerically predicted that a quick charging will induce a compressive hoop stress which may bring a risk of buckling instability in the coil,while a discharging will not.The simulations provide an insight of hybrid superconducting magnets under transient start-up or shutdown phases which are inevitably encountered in practical applications.展开更多
The effects of electric field intensity and treatment temperature on the microstructures of GH4199 superalloy after long-term aging were investigated. The results show that the number and size of carbides and TCP(σph...The effects of electric field intensity and treatment temperature on the microstructures of GH4199 superalloy after long-term aging were investigated. The results show that the number and size of carbides and TCP(σphase andμphase) phase in the alloy increase with increasing electric field intensity at the same heat treatment temperature and holding time. While the number and size of carbides and TCP phase are weekly influenced by treatment temperature with lower electric field intensity of 2 kV/cm. When the treat temperature is up to 1 093 K, annealing twins appear in the alloy, and the number of twins increases with increasing holding time. Since the electric field can provide the enough energy for the movement of vacancies and atom, it is considered that the nucleus of the twins formed with formation stack faults due to the mismatch of local atom in crystal caused by the vacancies, and the twins will grow with the increase of holding time. Meanwhile, such promoting effects on atom movement of the electric field increase with the increase of the electric field intensity, meantime the carbides and TCP phase grow fast with the increase of electric field intensity.展开更多
The effect of heat treatment in an electric field on micro plastic deformation characteristics of 2024 Al alloy was investigated. The mechanism of aging in an electric field affecting the micro plastic deformation beh...The effect of heat treatment in an electric field on micro plastic deformation characteristics of 2024 Al alloy was investigated. The mechanism of aging in an electric field affecting the micro plastic deformation behavior was preliminarily discussed. The results show that the resistance to micro plastic deformation of the alloy can be greatly increased by aging in an electric field. Aging temperature, aging time and electric field strength are selected by adopting the orthogonal design method and the optimum technological parameters are obtained.展开更多
After solution treatment, the 1420 Al-Li alloy samples were aged at different temperatures in an electric field with different intensity. The measurements made showed that the electric field increased the strength of ...After solution treatment, the 1420 Al-Li alloy samples were aged at different temperatures in an electric field with different intensity. The measurements made showed that the electric field increased the strength of the 1420 Al-Li alloy, and best properties were obtained when they were aged at 120 ℃ with E=4 kV/cm for 12 hrs. The electric field promoted the nucleation of δ′ phase, increased the quantity of the δ′ phase, and made the size of the δ′ phase particles smaller. The electric field restrained the formation and growth of PFZ, and increased the intensity of the electric field while the width of the PFZ was decreased.展开更多
A new Ag/AgCl sensor for measuring marine electric fields was prepared and characterized through electrochemical methods and scanning electron microscopy.Its performance was evaluated in both laboratory and deep-water...A new Ag/AgCl sensor for measuring marine electric fields was prepared and characterized through electrochemical methods and scanning electron microscopy.Its performance was evaluated in both laboratory and deep-water settings.The study indicates that the double-pulse electrodeposition method is advantageous for producing Ag/AgCl sensors that maintain excellent stability over time.During a 20-day continuous stability test,the potential difference of the sensor consistently remained between -24.76μV and 62.07μV,with a minimum potential difference drift of 2.77μV per 24 h.All sensors accurately detected artificial signals in both the time and frequency domains,and their responses were consistent with one another.The minimum noise level of the sensor was 0.59 nV(√Hz)^(-1)@1 Hz.The sensor performed well in high-precision electric field measurements at a depth of approximately 2800 m in the South China Sea.The high stability and low noise level of the sensor make it an effective tool for detecting electrical conductivity structures beneath the seafloor.展开更多
Objective To explore the effect and mechanism of aging on erection by using rat model. Materials & Methods Forty male SD rats of 3, 9, 18 and 24 months old were divided into 4 groups equally according to thei...Objective To explore the effect and mechanism of aging on erection by using rat model. Materials & Methods Forty male SD rats of 3, 9, 18 and 24 months old were divided into 4 groups equally according to their age. Apomorphine given subcutaneously and cavernous nerve electric field stimulation was used to induce erection of rats. Results The successful erection rate, number of erection times, and intracavernous pressure (ICP) in the rats of 18 and 24 month old was significantly lower than that of 3 and 9 month old. Conclusion The erectile function in aging rats is deteriorated. The damage mechanism with aging might be related to dopaminergic system in central nerves.展开更多
Precipitation of α-phase in massive and feathery microstructures was studied during aging in the single α field. It was found that the α-phase mainly precipitated along the γ-plate interfaces as laths in the feath...Precipitation of α-phase in massive and feathery microstructures was studied during aging in the single α field. It was found that the α-phase mainly precipitated along the γ-plate interfaces as laths in the feathery structure, while it nucleated at various sites in the massive structure in the form of particles and dominantly as plates. Precipitation of α-plates in the massive structure occurred by the difFusional ledge mechanism. The γm→α reaction proceeded by the growth of previously nucleated α-precipitates, and chiefly by the development of new α-plates展开更多
The continuous extension of human life expectancy and the global trend of population aging have contributed to a marked increase in the incidence of musculoskeletal diseases,with fractures and osteoporosis being promi...The continuous extension of human life expectancy and the global trend of population aging have contributed to a marked increase in the incidence of musculoskeletal diseases,with fractures and osteoporosis being prominent examples.Consequently,promoting bone regeneration is a crucial medical challenge that demands immediate attention.As early as the mid-20th century,researchers revealed that electrical stimulation could effectively promote the healing and regeneration of bone tissue.This is achieved by mimicking the endogenous electric field within bone tissue,which influences cellular behavior and molecular mechanisms.In recent years,electroactive hydrogels responsive to electric field stimulation have been developed and applied to regulate cell functions at different stages of bone regeneration.This paper elaborates on the regulatory effects of electrical stimulation on MSCs,macrophages,and vascular endothelial cells during the process of bone regeneration.It also involves the activation of relevant ion channels and signaling pathways.Subsequently,it comprehensively reviews various electric-field-responsive hydrogels developed in recent years,covering aspects such as material selection,preparation methods,characteristics,and their applications in bone regeneration.Ultimately,it provides an objective summary of the existing deficiencies in hydrogel materials and research,and looks ahead to future development directions.展开更多
Based on the microscopic phase-field model, the pre-aging temperature effects on the precipitation mechanism and microstructure evolution during two-step aging for Ni75Al9Cr16 alloy were simulated. The results show th...Based on the microscopic phase-field model, the pre-aging temperature effects on the precipitation mechanism and microstructure evolution during two-step aging for Ni75Al9Cr16 alloy were simulated. The results show that the early precipitation mechanism of L12 phase is the mixed mechanism of spinodal decomposition and non-classical nucleation growth, whereas the early precipitation mechanism of DO22 phase is spinodal decomposition when the pre-aging temperature is 873 K. The early precipitation mechanism of L12 phase is non-classical nucleation growth, whereas the early precipitation mechanism of DO22 phase is spinodal decomposition when the pre-aging temperature is 973 K. Under the effects of elastic strain energy, the cubic particles exhibit directional alignment along [100] and [010] directions during the late precipitation, which is more obvious at lower pre-temperature. DO22 phases appear earlier than L12 phases under these two kinds of precipitation processes; and the nucleation incubation time becomes long with the increase of pre-temperature.展开更多
Ag/AgCl electrode has been prepared using pressed powder techniques. In order to verify the feasibility of this type of electrode used as detecting electric field generated by vessels in seawater, its characteristics ...Ag/AgCl electrode has been prepared using pressed powder techniques. In order to verify the feasibility of this type of electrode used as detecting electric field generated by vessels in seawater, its characteristics of DC resistance, low frequency AC impedance, and receiving impedance in artificial seawater have been studied by polarization measurements, low frequency electrochemical impedance spectra, the open and short circuit cell conditions. The results show that the electrode can keep a low resistance when it responses the weak electrostatic field in seawater. The AC impedance of the electrode decreases as the frequency of the signal increasing. The receiving impedance decreases when the frequency of external field increases too. The valid detection bandwidth is determined by the properties of the impedance and the reactions occurring on the surface of the electrode.展开更多
Obtaining a uniform interface temperature field plays a crucial role in the interface bonding quality of bimetal compound rolls.Therefore,this study proposes an improved electroslag remelting cladding(ESRC)process usi...Obtaining a uniform interface temperature field plays a crucial role in the interface bonding quality of bimetal compound rolls.Therefore,this study proposes an improved electroslag remelting cladding(ESRC)process using an external magnetic field to improve the uniformity of the interface temperature of compound rolls.The improved ESRC comprises a conventional ESRC circuit and an external coil circuit.A comprehensive 3D model,including multi-physics fields,is proposed to study the effect of external magnetic fields on the multi-phys-ics fields and interface temperature uniformity.The simulated results demonstrate that the nonuniform Joule heat and flow fields cause a non-uniform interface temperature in the conventional ESRC.As for the improved ESRC,the magnetic flux density(B_(coil))along the z-axis is pro-duced by an anticlockwise current of the external coil.The rotating Lorentz force is generated from the interaction between the radial current and axial B_(coil).Therefore,the slag pool flows clockwise,which enhances circumferential effective thermal conductivity.As a result,the uniformity of the temperature field and interface temperature improve.In addition,the magnetic flux density and rotational speed of the simulated results are in good agreement with those of the experimental results,which verifies the accuracy of the improved ESRC model.Therefore,an improved ESRC is efficient for industrial production of the compound roll with a uniform interface bonding quality.展开更多
Aging often results in reduced visual acuity from changes in both the eye and neural circuits [1-4]. In normally aging subjects, primary visual cortex has been shown to have reduced responses to visual stimulation [5]...Aging often results in reduced visual acuity from changes in both the eye and neural circuits [1-4]. In normally aging subjects, primary visual cortex has been shown to have reduced responses to visual stimulation [5]. It is not known, however, to what extent aging affects visual field repre-sentations and population receptive sizes in human primary visual cortex. Here we use func-tional MRI (fMRI) and population receptive field (pRF) modeling [6] to measure angular and ec-centric retinotopic representations and population receptive fields in primary visual cortex in healthy aging subjects ages 57 - 70 and in healthy young volunteers ages 24 - 36 (n = 9). Retinotopic stimuli consisted of black and white, drifting checkerboards comprising moving bars 11 deg in radius. Primary visual cortex (V1) was clearly identifiable along the calcarine sulcus in all hemispheres. There was a significant decrease in the surface area of V1 from 0 to 3 deg eccentricity in the aging subjects with respect to the young subjects (p = 0.039). The coherence of the fMRI% BOLD modulation was significantly decreased in the aging subjects compared to the young subjects in the more peripheral eccentricity band from 7 to 10 deg (p = 0.029). Finally, pRF sizes were significantly increased within the 0 to 3 deg foveal representation of V1 in the aging subjects compared to the young subjects (p = 0.019). Understanding the extent of changes that occur in primary visual cortex during normal aging is essential both for understanding the normal aging process and for comparisons of healthy, aging subjects with aging patients suffering from age-related visual and cortical disorders.展开更多
Reducing coke use is an effective measure to reduce carbon emission and energy consumption in the blast furnace(BF)ironmaking.Essentially,BF is a high-temperature moving bed reactor,where complex physical transformati...Reducing coke use is an effective measure to reduce carbon emission and energy consumption in the blast furnace(BF)ironmaking.Essentially,BF is a high-temperature moving bed reactor,where complex physical transformations coupled with complicated reactions occur.This makes it challenging to investigate the factors determining BF performance with the conventional method.A multi-physical field coupling mathematical model of BF was thus developed to describe its mass and heat transfer as well as its intrinsic reactions.Then,the proposed model was validated with the production data.Under coupling conditions,influences of dominating reactions on BF performance(temperature distribution,gas distribution,iron formation reaction,and direct reduction degree)were revealed.The results indicated that coke combustion,indirect reduction,and direct reduction of iron ore mainly took place nearby the shaft tuyere,cohesive zone,and dripping zone,respectively.Besides,the rate of coke solution loss reaction was increased with the rising coke porosity in the cohesive zone.Considering the effect of coke porosity on the efficiency and stability of BF,the coke porosity of 0.42 was regarded as a reasonable value.展开更多
基金supported by the National Natural Science Foundation of China(No.12172321)。
文摘The nonlinear traveling wave vibration of rotating ferromagnetic functionally graded(FG)cylindrical shells under multi-physics fields is investigated.Grounded in the Kirchhoff-Love thin shell theory,the geometric nonlinearity is incorporated into the model,and the constitutive equations are derived.The physical parameters of functionally graded materials(FGMs),which exhibit continuous variation across the thickness gradient,are of particular interest.The nonlinear magneto-thermoelastic governing equations are derived in accord with Hamilton's principle.The nonlinear partial differential equations are discretized with the Galerkin method,and the analytical expression of traveling wave frequencies is derived with an approximate method.The accuracy of the proposed method is validated through the comparison with the results from the literature and numerical solutions.Finally,the visualization analyses are conducted to examine the effects of key parameters on the traveling wave frequencies.The results show that the factors including the power-law index,temperature,magnetic field intensity,and rotating speed have the coupling effects with respect to the nonlinear vibration behavior.
基金supported by the Stable Support Project and the Major National Science and Technology Project,China(Nos.2017-Ⅶ-0008-0101,2017-Ⅵ-0003-0073)。
文摘A multistage solution treatment process was applied for nickel-based single crystal superalloys,complemented by various aging durations and cooling rates.The microstructure was characterized by scanning electron microscopy(SEM)to observe the γ'phase.Additionally,phase field simulations were conducted to model the growth ofγ'precipitates during aging and analyze their morphological evolution.The experimental results demonstrated that the multistage solution treatment effectively eliminated eutectic phases and carbides.Moreover,samples aged for 10 min exhibited larger and more rectangularγ'precipitates compared with those aged for 5 min.Notably,secondary γ'precipitates were observed in samples subjected to water cooling.Two indices for quantifying rectangularization were proposed and successfully applied.Based on the simulation results,lattice mismatch induced coherency stresses and elevated stress triaxiality along the <111> direction contributed to the rectangularization of theγ'phase.
基金supported by the National Natural Science Foundation of China (No. 50575205)the Hi-Tech Research and Development (863) Program of China (Nos. 2006AA04Z233 and 2007AA04Z101)+1 种基金the Doctoral Foundation of Ministry of Education of China (No. 20070335204)the Zhejiang Provincial Natural Science Foundation of China (No. Z1080537)
文摘This study presents a new method to solve the difficult problem of precise machining a non-cylinder pinhole of a piston using embedded giant magnetostrictive material (GMM) in the component. We propose the finite element model of GMM smart component in electric, magnetic, and mechanical fields by step computation to optimize the design of GMM smart com-ponent. The proposed model is implemented by using COMSOL multi-physics V3.2a. The effects of the smart component on the deformation and the system resonance frequencies are studied. The results calculated by the model are in excellent agreement (relative errors are below 10%) with the experimental values.
基金Item Sponsored by National Natural Science Foundation of China[No.51171039]973 Program of China[2010CB631203]+1 种基金the Fundamental Research Funds for the Central University of China[N100602002]the 2010 Academy Awards Sponsorship of Doctoral Candidate for Newcomer of China[22002096]
文摘An external electric field was applied on GH4169 superalloy during aging at 700℃ in order to study the hardness variation.The results indicate that the amount of vacancies in the matrix increase after electric field treatment and some monovacancies changes into the vacancy clusters.Vacancy flow forms and the segregation of Fe and Cr atoms of the alloy generates because of the non-equilibrium distribution of electric field induced by the charged surfaces.Since the severe lattice distortion will occur at the local area,the specimen is hardened.
基金supported by the National Natural Science Foundation of China(No.U2003215).
文摘The smelting reduction process of the ilmenite in an electric arc furnace(EAF)is a commonly used technology for producing titanium slag in the world.It has particular significance to analyze the velocity-temperature-electromagnetics multi-physical field in an EAF for improving its productivity and reducing energy consumption.A transient three-dimensional mathematical model was developed to characterize the flow,heat transfer,and electromagnetic behavior in a titanium slag EAF.For describing the electromagnetic field and its effects on velocity and temperature distribution in the furnace,magnetohydrodynamic equations and conservation equations for mass,momentum,and energy were solved simultaneously by compiling the user-defined function program.The numerical model was verified by comparing with the literature data.The results indicate that the Lorentz force is the main driving force of the velocity and temperature distribution.Moreover,the influence of input current and location of electrodes on the multi-physical field distribution was also investigated.It is found that the appropriate range of input current and diameter of pitch circle are about 30,000 A and 3000-3500 mm,respectively.The mathematical model established can characterize the multi-physical field more accu-rately than before,which can provide valuable guidance for the operation improvement and design optimization of the EAF for producing titanium slag.
文摘To accelerate the practicality of electromagnetic railguns,it is necessary to use a combination of threedimensional numerical simulation and experiments to study the mechanism of bore damage.In this paper,a three-dimensional numerical model of the augmented railgun with four parallel unconventional rails is introduced to simulate the internal ballistic process and realize the multi-physics field coupling calculation of the rail gun,and a test experiment of a medium-caliber electromagnetic launcher powered by pulse formation network(PFN)is carried out.Various test methods such as spectrometer,fiber grating and high-speed camera are used to test several parameters such as muzzle initial velocity,transient magnetic field strength and stress-strain of rail.Combining the simulation results and experimental data,the damage condition of the contact surface is analyzed.
基金supported by Special funding project for research and development of key core technologies and common technologies in Shanxi Province(20201102017)supported by National Natural Science Foundations of China(Grant No.51874085 and 52274323)the Fundamental Research Funds for the Central Universities(Grant No.N2125030).
文摘A numerical model coupled with a multi-physical field based on dynamic formation of slag skin is established.After validation by comparing the experimental and simulation results of depth of metal pool,slag skin thickness and melt rate,it is utilized to investigate the effect of melt current on the coupled multi-physical field,slag skin thickness,metal pool depth and the heat flow distribution during electroslag remelting(ESR)Inconel 625 solidification process.The results showed that with the increase in the melt current,the velocities of ESR system and the temperature of metal pool increased,whereas the highest temperature of slag bath firstly decreased and then increased.With the increase in the melt current,the slag skin thickness,metal pool depth and melt rate increased.Furthermore,the characteristics of the heat flow distribution and the effect of melt current on the heat flow distribution were analysed.
基金the National Natural Science Foundation of China(Nos.11932008 and 11672120)the Fundamental Research Funds for the Central Universities of China(No.lzujbky-2022-kb01)。
文摘A transient multi-physics model incorporated with an electromagneto-thermomechanical coupling is developed to capture the multi-field behavior of a single-pancake(SP)insert no-insulation(NI)coil in a hybrid magnet during the charging and discharging processes.The coupled problem is resolved by means of the finite element method(FEM)for the magneto-thermo-elastic behaviors and the Runge-Kutta method for the transient responses of the electrical circuits of the hybrid superconducting magnet system.The results reveal that the transient multi-physics responses of the insert NI coil primarily depend on the charging/discharging procedure of the hybrid magnet.Moreover,a reverse azimuthal current and a compressive hoop stress are induced in the insert NI coil during the charging process,while a forward azimuthal current and a tensile hoop stress are observed during the discharging process.The induced voltages in the insert NI coil can drive the currents flowing across the radial turns where the contact resistance exists.Therefore,it brings forth significant Joule heat,causing a temperature rise and a uniform distribution of this heat in the coil turns.Accordingly,a thermally/mechanically unstable or quenching event may be encountered when a high operating current is flowing in the insert NI coil.It is numerically predicted that a quick charging will induce a compressive hoop stress which may bring a risk of buckling instability in the coil,while a discharging will not.The simulations provide an insight of hybrid superconducting magnets under transient start-up or shutdown phases which are inevitably encountered in practical applications.
文摘The effects of electric field intensity and treatment temperature on the microstructures of GH4199 superalloy after long-term aging were investigated. The results show that the number and size of carbides and TCP(σphase andμphase) phase in the alloy increase with increasing electric field intensity at the same heat treatment temperature and holding time. While the number and size of carbides and TCP phase are weekly influenced by treatment temperature with lower electric field intensity of 2 kV/cm. When the treat temperature is up to 1 093 K, annealing twins appear in the alloy, and the number of twins increases with increasing holding time. Since the electric field can provide the enough energy for the movement of vacancies and atom, it is considered that the nucleus of the twins formed with formation stack faults due to the mismatch of local atom in crystal caused by the vacancies, and the twins will grow with the increase of holding time. Meanwhile, such promoting effects on atom movement of the electric field increase with the increase of the electric field intensity, meantime the carbides and TCP phase grow fast with the increase of electric field intensity.
文摘The effect of heat treatment in an electric field on micro plastic deformation characteristics of 2024 Al alloy was investigated. The mechanism of aging in an electric field affecting the micro plastic deformation behavior was preliminarily discussed. The results show that the resistance to micro plastic deformation of the alloy can be greatly increased by aging in an electric field. Aging temperature, aging time and electric field strength are selected by adopting the orthogonal design method and the optimum technological parameters are obtained.
文摘After solution treatment, the 1420 Al-Li alloy samples were aged at different temperatures in an electric field with different intensity. The measurements made showed that the electric field increased the strength of the 1420 Al-Li alloy, and best properties were obtained when they were aged at 120 ℃ with E=4 kV/cm for 12 hrs. The electric field promoted the nucleation of δ′ phase, increased the quantity of the δ′ phase, and made the size of the δ′ phase particles smaller. The electric field restrained the formation and growth of PFZ, and increased the intensity of the electric field while the width of the PFZ was decreased.
基金supported by the National Natural Science Foundation of China(Nos.U23B20158,91958210,42004055)。
文摘A new Ag/AgCl sensor for measuring marine electric fields was prepared and characterized through electrochemical methods and scanning electron microscopy.Its performance was evaluated in both laboratory and deep-water settings.The study indicates that the double-pulse electrodeposition method is advantageous for producing Ag/AgCl sensors that maintain excellent stability over time.During a 20-day continuous stability test,the potential difference of the sensor consistently remained between -24.76μV and 62.07μV,with a minimum potential difference drift of 2.77μV per 24 h.All sensors accurately detected artificial signals in both the time and frequency domains,and their responses were consistent with one another.The minimum noise level of the sensor was 0.59 nV(√Hz)^(-1)@1 Hz.The sensor performed well in high-precision electric field measurements at a depth of approximately 2800 m in the South China Sea.The high stability and low noise level of the sensor make it an effective tool for detecting electrical conductivity structures beneath the seafloor.
基金This study was supported by Shanghai Committee of Science and Technology( No.0 0 41 1 90 68)
文摘Objective To explore the effect and mechanism of aging on erection by using rat model. Materials & Methods Forty male SD rats of 3, 9, 18 and 24 months old were divided into 4 groups equally according to their age. Apomorphine given subcutaneously and cavernous nerve electric field stimulation was used to induce erection of rats. Results The successful erection rate, number of erection times, and intracavernous pressure (ICP) in the rats of 18 and 24 month old was significantly lower than that of 3 and 9 month old. Conclusion The erectile function in aging rats is deteriorated. The damage mechanism with aging might be related to dopaminergic system in central nerves.
文摘Precipitation of α-phase in massive and feathery microstructures was studied during aging in the single α field. It was found that the α-phase mainly precipitated along the γ-plate interfaces as laths in the feathery structure, while it nucleated at various sites in the massive structure in the form of particles and dominantly as plates. Precipitation of α-plates in the massive structure occurred by the difFusional ledge mechanism. The γm→α reaction proceeded by the growth of previously nucleated α-precipitates, and chiefly by the development of new α-plates
基金supported by the National Science Foundation of China(No.82272491)。
文摘The continuous extension of human life expectancy and the global trend of population aging have contributed to a marked increase in the incidence of musculoskeletal diseases,with fractures and osteoporosis being prominent examples.Consequently,promoting bone regeneration is a crucial medical challenge that demands immediate attention.As early as the mid-20th century,researchers revealed that electrical stimulation could effectively promote the healing and regeneration of bone tissue.This is achieved by mimicking the endogenous electric field within bone tissue,which influences cellular behavior and molecular mechanisms.In recent years,electroactive hydrogels responsive to electric field stimulation have been developed and applied to regulate cell functions at different stages of bone regeneration.This paper elaborates on the regulatory effects of electrical stimulation on MSCs,macrophages,and vascular endothelial cells during the process of bone regeneration.It also involves the activation of relevant ion channels and signaling pathways.Subsequently,it comprehensively reviews various electric-field-responsive hydrogels developed in recent years,covering aspects such as material selection,preparation methods,characteristics,and their applications in bone regeneration.Ultimately,it provides an objective summary of the existing deficiencies in hydrogel materials and research,and looks ahead to future development directions.
基金Project(50671084) supported by the National Natural Science Foundation of ChinaProject(Z200714) supported by the Postgraduate Foundation of Northwestern Polytechnical University, China
文摘Based on the microscopic phase-field model, the pre-aging temperature effects on the precipitation mechanism and microstructure evolution during two-step aging for Ni75Al9Cr16 alloy were simulated. The results show that the early precipitation mechanism of L12 phase is the mixed mechanism of spinodal decomposition and non-classical nucleation growth, whereas the early precipitation mechanism of DO22 phase is spinodal decomposition when the pre-aging temperature is 873 K. The early precipitation mechanism of L12 phase is non-classical nucleation growth, whereas the early precipitation mechanism of DO22 phase is spinodal decomposition when the pre-aging temperature is 973 K. Under the effects of elastic strain energy, the cubic particles exhibit directional alignment along [100] and [010] directions during the late precipitation, which is more obvious at lower pre-temperature. DO22 phases appear earlier than L12 phases under these two kinds of precipitation processes; and the nucleation incubation time becomes long with the increase of pre-temperature.
文摘Ag/AgCl electrode has been prepared using pressed powder techniques. In order to verify the feasibility of this type of electrode used as detecting electric field generated by vessels in seawater, its characteristics of DC resistance, low frequency AC impedance, and receiving impedance in artificial seawater have been studied by polarization measurements, low frequency electrochemical impedance spectra, the open and short circuit cell conditions. The results show that the electrode can keep a low resistance when it responses the weak electrostatic field in seawater. The AC impedance of the electrode decreases as the frequency of the signal increasing. The receiving impedance decreases when the frequency of external field increases too. The valid detection bandwidth is determined by the properties of the impedance and the reactions occurring on the surface of the electrode.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51874084 and 52174303)the Fundamental Research Funds for the Central Universities of China(No.N2125026).
文摘Obtaining a uniform interface temperature field plays a crucial role in the interface bonding quality of bimetal compound rolls.Therefore,this study proposes an improved electroslag remelting cladding(ESRC)process using an external magnetic field to improve the uniformity of the interface temperature of compound rolls.The improved ESRC comprises a conventional ESRC circuit and an external coil circuit.A comprehensive 3D model,including multi-physics fields,is proposed to study the effect of external magnetic fields on the multi-phys-ics fields and interface temperature uniformity.The simulated results demonstrate that the nonuniform Joule heat and flow fields cause a non-uniform interface temperature in the conventional ESRC.As for the improved ESRC,the magnetic flux density(B_(coil))along the z-axis is pro-duced by an anticlockwise current of the external coil.The rotating Lorentz force is generated from the interaction between the radial current and axial B_(coil).Therefore,the slag pool flows clockwise,which enhances circumferential effective thermal conductivity.As a result,the uniformity of the temperature field and interface temperature improve.In addition,the magnetic flux density and rotational speed of the simulated results are in good agreement with those of the experimental results,which verifies the accuracy of the improved ESRC model.Therefore,an improved ESRC is efficient for industrial production of the compound roll with a uniform interface bonding quality.
文摘Aging often results in reduced visual acuity from changes in both the eye and neural circuits [1-4]. In normally aging subjects, primary visual cortex has been shown to have reduced responses to visual stimulation [5]. It is not known, however, to what extent aging affects visual field repre-sentations and population receptive sizes in human primary visual cortex. Here we use func-tional MRI (fMRI) and population receptive field (pRF) modeling [6] to measure angular and ec-centric retinotopic representations and population receptive fields in primary visual cortex in healthy aging subjects ages 57 - 70 and in healthy young volunteers ages 24 - 36 (n = 9). Retinotopic stimuli consisted of black and white, drifting checkerboards comprising moving bars 11 deg in radius. Primary visual cortex (V1) was clearly identifiable along the calcarine sulcus in all hemispheres. There was a significant decrease in the surface area of V1 from 0 to 3 deg eccentricity in the aging subjects with respect to the young subjects (p = 0.039). The coherence of the fMRI% BOLD modulation was significantly decreased in the aging subjects compared to the young subjects in the more peripheral eccentricity band from 7 to 10 deg (p = 0.029). Finally, pRF sizes were significantly increased within the 0 to 3 deg foveal representation of V1 in the aging subjects compared to the young subjects (p = 0.019). Understanding the extent of changes that occur in primary visual cortex during normal aging is essential both for understanding the normal aging process and for comparisons of healthy, aging subjects with aging patients suffering from age-related visual and cortical disorders.
基金supported by the National Natural Science Foundation of China(Grant Nos.22278001 and 21776002)the Natural Science Foundation of Anhui Provincial Education Department(No.KJ2021A0407)+1 种基金the Natural Science Foundation of Anhui Province(Grant No.2008085QB87)Anhui Provincial Postdoctoral Science Foundation(No.2021B538).
文摘Reducing coke use is an effective measure to reduce carbon emission and energy consumption in the blast furnace(BF)ironmaking.Essentially,BF is a high-temperature moving bed reactor,where complex physical transformations coupled with complicated reactions occur.This makes it challenging to investigate the factors determining BF performance with the conventional method.A multi-physical field coupling mathematical model of BF was thus developed to describe its mass and heat transfer as well as its intrinsic reactions.Then,the proposed model was validated with the production data.Under coupling conditions,influences of dominating reactions on BF performance(temperature distribution,gas distribution,iron formation reaction,and direct reduction degree)were revealed.The results indicated that coke combustion,indirect reduction,and direct reduction of iron ore mainly took place nearby the shaft tuyere,cohesive zone,and dripping zone,respectively.Besides,the rate of coke solution loss reaction was increased with the rising coke porosity in the cohesive zone.Considering the effect of coke porosity on the efficiency and stability of BF,the coke porosity of 0.42 was regarded as a reasonable value.
