Batch processes are usually involved with multiple phases in the time domain and many researches on process monitoring as well as quality prediction have been done using phase information. However, few of them conside...Batch processes are usually involved with multiple phases in the time domain and many researches on process monitoring as well as quality prediction have been done using phase information. However, few of them consider phase transitions, though they exit widely in batch processes and have non-ignorable impacts on product qualities. In the present work, a phase-based partial least squares (PLS) method utilizing transition information is proposed to give both online and offline quality predictions. First, batch processes are divided into several phases using regression parameters other than prior process knowledge. Then both steady phases and transitions which have great influences on qualities are identified as critical-to-quality phases using statistical methods. Finally, based on the analysis of different characteristics of transitions and steady phases, an integrated algorithm is developed for quality prediction. The application to an injection molding process shows the effectiveness of the proposed algorithm in comparison with the traditional MPLS method and the phase-based PLS method.展开更多
Batch process is a typical multi-phase process. Due to the interaction between the phases of the batch process, high precision control in a single phase cannot guarantee high precision control of the whole batch proce...Batch process is a typical multi-phase process. Due to the interaction between the phases of the batch process, high precision control in a single phase cannot guarantee high precision control of the whole batch process. In order to solve this problem, the guaranteed cost iterative learning control(ILC) of multi-phase batch processes is studied in this paper. Firstly, through introducing the output error, the state error and the extended information, the multi-phase batch process is transformed into an equivalent 2D switched system which has different dimensions. In addition, under the measurable condition, the guaranteed cost iterative learning control law with extended information is designed. The proposed control law ensures not only the stability of the system but also the optimal control performance. Next, in order to study the stability of the system and the minimum running time under the condition of stable running, the multi-Lyapunov function method is used. By means of the average dwell time method, the sufficient conditions ensuring system to be exponentially stable are given in the form of linear matrix inequality(LMI). Finally, the injection molding process is taken as an example to make simulation, which shows the feasibility and effectiveness of the proposed method.展开更多
Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing ...Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing is considered,and an adaptive cooperated shuffled frog-leaping algorithm(ACSFLA)is proposed to minimize makespan and total tardiness simultaneously.ACSFLA determines the search times for each memeplex based on its quality,with more searches in high-quality memeplexes.An adaptive cooperated and diversified search mechanism is applied,dynamically adjusting search strategies for each memeplex based on their dominance relationships and quality.During the cooperated search,ACSFLA uses a segmented and dynamic targeted search approach,while in non-cooperated scenarios,the search focuses on local search around superior solutions to improve efficiency.Furthermore,ACSFLA employs adaptive population division and partial population shuffling strategies.Through these strategies,memeplexes with low evolutionary potential are selected for reconstruction in the next generation,while thosewithhighevolutionarypotential are retained to continue their evolution.Toevaluate the performance of ACSFLA,comparative experiments were conducted using ACSFLA,SFLA,ASFLA,MOABC,and NSGA-CC in 90 instances.The computational results reveal that ACSFLA outperforms the other algorithms in 78 of the 90 test cases,highlighting its advantages in solving the parallel BPM scheduling problem with machine eligibility.展开更多
As a complicated optimization problem,parallel batch processing machines scheduling problem(PBPMSP)exists in many real-life manufacturing industries such as textiles and semiconductors.Machine eligibility means that a...As a complicated optimization problem,parallel batch processing machines scheduling problem(PBPMSP)exists in many real-life manufacturing industries such as textiles and semiconductors.Machine eligibility means that at least one machine is not eligible for at least one job.PBPMSP and scheduling problems with machine eligibility are frequently considered;however,PBPMSP with machine eligibility is seldom explored.This study investigates PBPMSP with machine eligibility in fabric dyeing and presents a novel shuffled frog-leaping algorithm with competition(CSFLA)to minimize makespan.In CSFLA,the initial population is produced in a heuristic and random way,and the competitive search of memeplexes comprises two phases.Competition between any two memeplexes is done in the first phase,then iteration times are adjusted based on competition,and search strategies are adjusted adaptively based on the evolution quality of memeplexes in the second phase.An adaptive population shuffling is given.Computational experiments are conducted on 100 instances.The computational results showed that the new strategies of CSFLA are effective and that CSFLA has promising advantages in solving the considered PBPMSP.展开更多
The initial step in the resource utilization of Chinese medicine residues(CMRs)involves dehydration pretreatment,which results in high concentrations of organic wastewater and leads to environmental pollution.Meanwhil...The initial step in the resource utilization of Chinese medicine residues(CMRs)involves dehydration pretreatment,which results in high concentrations of organic wastewater and leads to environmental pollution.Meanwhile,to address the issue of anaerobic systems failing due to acidification under shock loading,a microaerobic expanded granular sludge bed(EGSB)and moving bed sequencing batch reactor(MBSBR)combined process was proposed in this study.Microaeration facilitated hydrolysis,improved the removal of nitrogen and phosphorus pollutants,maintained a low concentration of volatile fatty acids(VFAs),and enhanced system stability.In addition,microaeration promoted microbial richness and diversity,enriching three phyla:Bacteroidota,Synergistota and Firmicutes associated with hydrolytic acidification.Furthermore,aeration intensity in MBSBR was optimized.Elevated levels of dissolved oxygen(DO)impacted biofilm structure,suppressed denitrifying bacteria activity,led to nitrate accumulation,and hindered simultaneous nitrification and denitrification(SND).Maintaining a DO concentration of 2 mg/L enhanced the removal of nitrogen and phosphorus while conserving energy.The combined process achieved removal efficiencies of 98.25%,90.49%,and 98.55%for chemical oxygen demand(COD),total nitrogen(TN),and total phosphorus(TP),respectively.Typical pollutants liquiritin(LQ)and glycyrrhizic acid(GA)were completely degraded.This study presents an innovative approach for the treatment of high-concentration organic wastewater and provides a reliable solution for the pollution control in utilization of CMRs resources.展开更多
间歇生产过程具有弹性大、灵活等特点,其市场适应性较强。化工生产中间歇生产过程占相当比例,文章就间歇生产工艺的模拟与优化进行介绍,利用Aspen Batch Process Developer模拟间歇工艺过程,可以快速地得到工艺流程的物料衡算、热量衡...间歇生产过程具有弹性大、灵活等特点,其市场适应性较强。化工生产中间歇生产过程占相当比例,文章就间歇生产工艺的模拟与优化进行介绍,利用Aspen Batch Process Developer模拟间歇工艺过程,可以快速地得到工艺流程的物料衡算、热量衡算、操作时间、公用工程和成本估算等结果。同时,还可以对模拟结果进行分析,找出制约生产工艺的瓶颈,并对生产周期、生产规模、生产设备等进行优化,提高工艺设计效率,降低生产成本。展开更多
In the past decades, on-line monitoring of batch processes using multi-way independent component analysis （MICA） has received considerable attention in both academia and industry. This paper focuses on two troubleso...In the past decades, on-line monitoring of batch processes using multi-way independent component analysis （MICA） has received considerable attention in both academia and industry. This paper focuses on two troublesome issues concerning selecting dominant independent components without a standard criterion and deter- mining the control limits of monitoring statistics in the presence of non-Gaussian distribution. To optimize the number of key independent components~ we introctuce-anoveiconcept of-system-cleviation, which is ab^e＇io＇evalu[ ate the reconstructed observations with different independent components. The monitored statistics arc transformed to Gaussian distribution data by means of Box-Cox transformation, which helps readily determine the control limits. The proposed method is applied to on-line monitoring of a fed-hatch penicillin fermentation simulator, and the ex- _perimental results indicate the advantages of the improved MICA monitoring compared to the conventional methods.展开更多
Since there are not enough fault data in historical data sets, it is very difficult to diagnose faults for batch processes. In addition, a complete batch trajectory can be obtained till the end of its operation. In or...Since there are not enough fault data in historical data sets, it is very difficult to diagnose faults for batch processes. In addition, a complete batch trajectory can be obtained till the end of its operation. In order to overcome the need for estimated or filled up future unmeasured values in the online fault diagnosis, sufficiently utilize the finite information of faults, and enhance the diagnostic performance, an improved multi-model Fisher discriminant analysis is represented. The trait of the proposed method is that the training data sets are made of the current measured information and the past major discriminant information, and not only the current information or the whole batch data. An industrial typical multi-stage streptomycin fermentation process is used to test the performance of fault diagnosis of the proposed method.展开更多
Chemical batch processes have become significant in chemical manufacturing. In these processes, large numbers of chemical products are produced to satisfy human demands in daily life. Recently, economy globalization h...Chemical batch processes have become significant in chemical manufacturing. In these processes, large numbers of chemical products are produced to satisfy human demands in daily life. Recently, economy globalization has resulted, in growing worldwide competitions in tradi.tional chemical .process industry. In order to keep competitive in the global marketplace, each company must optimize its production management and set up a reactive system for market fluctuation. Scheduling is the core of production management in chemical processes. The goal of this paper is to review the recent developments in this challenging area. Classifications of batch scheduling problems and optimization methods are introduced. A comparison of six typical models is shown in a general benchmark example from the literature. Finally, challenges and applications in future research are discussed.展开更多
A batch-to-batch optimal iterative learning control （ILC） strategy for the tracking control of product quality in batch processes is presented. The linear time-varying perturbation （LTVP） model is built for produc...A batch-to-batch optimal iterative learning control （ILC） strategy for the tracking control of product quality in batch processes is presented. The linear time-varying perturbation （LTVP） model is built for product quality around the nominal trajectories. To address problems of model-plant mismatches, model prediction errors in the previous batch run are added to the model predictions for the current batch run. Then tracking error transition models can be built, and the ILC law with direct error feedback is explicitly obtained, A rigorous theorem is proposed, to prove the convergence of tracking error under ILC, The proposed methodology is illustrated on a typical batch reactor and the results show that the performance of trajectory tracking is gradually improved by the ILC.展开更多
An iterative learning model predictive control （ILMPC） technique is applied to a class of continuous/batch processes. Such processes are characterized by the operations of batch processes generating periodic strong ...An iterative learning model predictive control （ILMPC） technique is applied to a class of continuous/batch processes. Such processes are characterized by the operations of batch processes generating periodic strong disturbances to the continuous processes and traditional regulatory controllers are unable to eliminate these periodic disturbances. ILMPC integrates the feature of iterative learning control （ILC） handling repetitive signal and the flexibility of model predictive control （MPC）. By on-line monitoring the operation status of batch processes, an event-driven iterative learning algorithm for batch repetitive disturbances is initiated and the soft constraints are adjusted timely as the feasible region is away from the desired operating zone. The results of an industrial application show that the proposed ILMPC method is effective for a class of continuous/batch processes.展开更多
Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes w...Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes with actuator failures. This paper introduces relevant concepts of the fault-tolerant guaranteed cost control and formulates the robust iterative learning reliable guaranteed cost controller (ILRGCC). A significant advantage is that the proposed ILRGCC design method can be used for on-line optimization against batch-to-batch process uncertainties to realize robust tracking of set-point trajectory in time and batch-to-batch sequences. For the convenience of implementation, only measured output errors of current and previous cycles are used to design a synthetic controller for iterative learning control, consisting of dynamic output feedback plus feed-forward control. The proposed controller can not only guarantee the closed-loop convergency along time and cycle sequences but also satisfy the H∞performance level and a cost function with upper bounds for all admissible uncertainties and any actuator failures. Sufficient conditions for the controller solution are derived in terms of linear matrix inequalities (LMIs), and design procedures, which formulate a convex optimization problem with LMI constraints, are presented. An example of injection molding is given to illustrate the effectiveness and advantages of the ILRGCC design approach.展开更多
Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a n...Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a new batch process monitoring and fault diagnosis method based on feature extract in Fisher subspace is proposed.The feature vector and the feature direction are extracted by projecting the high-dimension process data onto the low-dimension Fisher space. The similarity of feature vector between the current and the reference batch is calculated for on-line process monitoring and the contribution plot of weights in feature direction is calculated for fault diagnosis. The approach overcomes the need for estimating or tilling in the unknown portion of the process variables trajectories from the current time to the end of the batch. Simulation results on the benchmark model of penicillin fermentation process can demonstrate that in comparison to the MPCA method, the proposed method is more accurate and efficient for process monitoring and fault diagnosis.展开更多
Multi-way principal component analysis (MPCA) is the most widely utilized multivariate statistical process control method for batch processes. Previous research on MPCA has commonly agreed that it is not a suitable me...Multi-way principal component analysis (MPCA) is the most widely utilized multivariate statistical process control method for batch processes. Previous research on MPCA has commonly agreed that it is not a suitable method for multiphase batch process analysis. In this paper, abundant phase information is revealed by way of partitioning MPCA model, and a new phase identification method based on global dynamic information is proposed. The application to injection molding shows that it is a feasible and effective method for multiphase batch process knowledge understanding, phase division and process monitoring.展开更多
In this paper, the modelling and multi-objective optimal control of batch processes, using a recurrent neuro-fuzzy network, are presented. The recurrent neuro-fuzzy network, forms a ＂global＂ nonlinear long-range pre...In this paper, the modelling and multi-objective optimal control of batch processes, using a recurrent neuro-fuzzy network, are presented. The recurrent neuro-fuzzy network, forms a ＂global＂ nonlinear long-range prediction model through the fuzzy conjunction of a number of ＂local＂ linear dynamic models. Network output is fed back to network input through one or more time delay units, which ensure that predictions from the recurrent neuro-fuzzy network are long-range. In building a recurrent neural network model, process knowledge is used initially to partition the processes non-linear characteristics into several local operating regions, and to aid in the initialisation of corresponding network weights. Process operational data is then used to train the network. Membership functions of the local regimes are identified, and local models are discovered via network training. Based on a recurrent neuro-fuzzy network model, a multi-objective optimal control policy can be obtained. The proposed technique is applied to a fed-batch reactor.展开更多
Based on the two-dimensional （2D） system theory, an integrated predictive iterative learning control （2D-IPILC） strategy for batch processes is presented. First, the output response and the error transition model ...Based on the two-dimensional （2D） system theory, an integrated predictive iterative learning control （2D-IPILC） strategy for batch processes is presented. First, the output response and the error transition model predictions along the batch index can be calculated analytically due to the 2D Roesser model of the batch process. Then, an integrated framework of combining iterative learning control （ILC） and model predictive control （MPC） is formed reasonably. The output of feedforward ILC is estimated on the basis of the predefined process 2D model. By min- imizing a quadratic objective function, the feedback MPC is introduced to obtain better control performance for tracking problem of batch processes. Simulations on a typical batch reactor demonstrate that the satisfactory tracking performance as well as faster convergence speed can be achieved than traditional proportion type （P- t-we） ILC despite the model error and disturbances.展开更多
In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independen...In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independent method, and in the feature extraction there is not fully taken into account the characterization of fault information, it will make the process monitoring ineffective, so a fault monitoring method based on WGNPE(weighted global neighborhood preserving embedding)–GSVDD(greedy support vector data description) related and independent variables is proposed. First, mutual information method is used to separate the related variables and independent variables. Secondly, WGNPE method is used to extract the local and global structures of the related variables in batch process and highlight the fault information, GSVDD method is used to extract the process information of the independent variables quickly and effectively. Finally, the statistical monitoring model is established to achieve process monitoring based on WGNPE and GSVDD. The effectiveness of the proposed method was verified by the penicillin fermentation process.展开更多
In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to laten...In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to latent structure (MPLS) were proposed for on-line batch process monitoring. However, they are based on the decomposition of relative covariance matrix and strongly affected by outlying observations. In this paper, in view of an efficient projection pursuit algorithm, a robust statistical batch process monitoring (RSBPM) framework,which is resistant to outliers, is proposed to reduce the high demand for modeling data. The construction of robust normal operating condition model and robust control limits are discussed in detail. It is evaluated on monitoring an industrial streptomycin fermentation process and compared with the conventional MPCA. The results show that the RSBPM framework is resistant to possible outliers and the robustness is confirmed.展开更多
Considering the two-dimension(2 D) characteristic and the unknown optimal trajectory problem of the batch processes, an integrated model predictive control-iterative learning control(MPC-ILC) for batch processes is pr...Considering the two-dimension(2 D) characteristic and the unknown optimal trajectory problem of the batch processes, an integrated model predictive control-iterative learning control(MPC-ILC) for batch processes is proposed in this paper. Firstly, the batch-axis information and time-axis information are combined into one quadratic performance index. It implies the integration of ILC and MPC algorithm idea, which leads to superior tracking performance and better robustness against disturbance and uncertainty. To address the problem of the unknown optimal trajectory, both time-varying prediction horizon and end product quality control are employed. Moreover, an integrated 2 D just-in-time learning(JITL) model is used to improve the predictive accuracy. Furthermore, rigorous description and proof are presented to prove the convergence and tracking performance of the proposed MPC-ILC strategy. The simulation results show the effectiveness of the proposed method.展开更多
In this paper, we describe a new batch process monitoring method based on multilevel independent component analysis and principal component analysis (MLICA-PCA). Unlike the conventional multi-way principal component a...In this paper, we describe a new batch process monitoring method based on multilevel independent component analysis and principal component analysis (MLICA-PCA). Unlike the conventional multi-way principal component analysis (MPCA) method, MLICA-PCA provides a separated interpretation for multilevel batch process data. Batch process data are partitioned into two levels: the within-batch level and the between-batch level. In each level, the Gaussian and non-Gaussian components of process information can be separately extracted. I2, T2 and SPE statistics are individually built and monitored. The new method facilitates fault diagnosis. Since the two variation levels are decomposed, the variables responsible for faults in each level can be identified and interpreted more easily. A case study of the Dupont benchmark process showed that the proposed method was more efficient and interpretable in fault detection and diagnosis, compared to the alternative batch process monitoring method.展开更多
基金Supported by Guangzhou Nansha District Bureau of Economy & Trade, Science & Technology, Information, Project (201103003)the Fundamental Research Funds for the Central Universities (2012QNA5012)+1 种基金Project of Education Department of Zhejiang Province (Y201223159)Technology Foundation for Selected Overseas Chinese Scholar of Zhejiang Province (J20120561)
文摘Batch processes are usually involved with multiple phases in the time domain and many researches on process monitoring as well as quality prediction have been done using phase information. However, few of them consider phase transitions, though they exit widely in batch processes and have non-ignorable impacts on product qualities. In the present work, a phase-based partial least squares (PLS) method utilizing transition information is proposed to give both online and offline quality predictions. First, batch processes are divided into several phases using regression parameters other than prior process knowledge. Then both steady phases and transitions which have great influences on qualities are identified as critical-to-quality phases using statistical methods. Finally, based on the analysis of different characteristics of transitions and steady phases, an integrated algorithm is developed for quality prediction. The application to an injection molding process shows the effectiveness of the proposed algorithm in comparison with the traditional MPLS method and the phase-based PLS method.
基金the National Natural Science Foundation of China(Nos.61773190 and 61433005)the Guangdong Innovative and Entrepreneurial Research Team Program(No.2013G076)
文摘Batch process is a typical multi-phase process. Due to the interaction between the phases of the batch process, high precision control in a single phase cannot guarantee high precision control of the whole batch process. In order to solve this problem, the guaranteed cost iterative learning control(ILC) of multi-phase batch processes is studied in this paper. Firstly, through introducing the output error, the state error and the extended information, the multi-phase batch process is transformed into an equivalent 2D switched system which has different dimensions. In addition, under the measurable condition, the guaranteed cost iterative learning control law with extended information is designed. The proposed control law ensures not only the stability of the system but also the optimal control performance. Next, in order to study the stability of the system and the minimum running time under the condition of stable running, the multi-Lyapunov function method is used. By means of the average dwell time method, the sufficient conditions ensuring system to be exponentially stable are given in the form of linear matrix inequality(LMI). Finally, the injection molding process is taken as an example to make simulation, which shows the feasibility and effectiveness of the proposed method.
文摘Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing is considered,and an adaptive cooperated shuffled frog-leaping algorithm(ACSFLA)is proposed to minimize makespan and total tardiness simultaneously.ACSFLA determines the search times for each memeplex based on its quality,with more searches in high-quality memeplexes.An adaptive cooperated and diversified search mechanism is applied,dynamically adjusting search strategies for each memeplex based on their dominance relationships and quality.During the cooperated search,ACSFLA uses a segmented and dynamic targeted search approach,while in non-cooperated scenarios,the search focuses on local search around superior solutions to improve efficiency.Furthermore,ACSFLA employs adaptive population division and partial population shuffling strategies.Through these strategies,memeplexes with low evolutionary potential are selected for reconstruction in the next generation,while thosewithhighevolutionarypotential are retained to continue their evolution.Toevaluate the performance of ACSFLA,comparative experiments were conducted using ACSFLA,SFLA,ASFLA,MOABC,and NSGA-CC in 90 instances.The computational results reveal that ACSFLA outperforms the other algorithms in 78 of the 90 test cases,highlighting its advantages in solving the parallel BPM scheduling problem with machine eligibility.
基金supported by the National Natural Science Foundation of China(Grant Number 61573264).
文摘As a complicated optimization problem,parallel batch processing machines scheduling problem(PBPMSP)exists in many real-life manufacturing industries such as textiles and semiconductors.Machine eligibility means that at least one machine is not eligible for at least one job.PBPMSP and scheduling problems with machine eligibility are frequently considered;however,PBPMSP with machine eligibility is seldom explored.This study investigates PBPMSP with machine eligibility in fabric dyeing and presents a novel shuffled frog-leaping algorithm with competition(CSFLA)to minimize makespan.In CSFLA,the initial population is produced in a heuristic and random way,and the competitive search of memeplexes comprises two phases.Competition between any two memeplexes is done in the first phase,then iteration times are adjusted based on competition,and search strategies are adjusted adaptively based on the evolution quality of memeplexes in the second phase.An adaptive population shuffling is given.Computational experiments are conducted on 100 instances.The computational results showed that the new strategies of CSFLA are effective and that CSFLA has promising advantages in solving the considered PBPMSP.
基金funding from the National Key R&D Program of China(No.2019YFC1906600)the National Natural Science Foundation of China(No.52200049)+3 种基金the China Postdoctoral Science Foundation(No.2022TQ0089)the Heilongjiang Province Postdoctoral Science Foundation(No.LBH-Z22181)the State Key Laboratory of Urban Water Resource and Environment(Harbin Institute of Technology)(No.2023DX06)the Fundamental Research Funds for the Central Universities。
文摘The initial step in the resource utilization of Chinese medicine residues(CMRs)involves dehydration pretreatment,which results in high concentrations of organic wastewater and leads to environmental pollution.Meanwhile,to address the issue of anaerobic systems failing due to acidification under shock loading,a microaerobic expanded granular sludge bed(EGSB)and moving bed sequencing batch reactor(MBSBR)combined process was proposed in this study.Microaeration facilitated hydrolysis,improved the removal of nitrogen and phosphorus pollutants,maintained a low concentration of volatile fatty acids(VFAs),and enhanced system stability.In addition,microaeration promoted microbial richness and diversity,enriching three phyla:Bacteroidota,Synergistota and Firmicutes associated with hydrolytic acidification.Furthermore,aeration intensity in MBSBR was optimized.Elevated levels of dissolved oxygen(DO)impacted biofilm structure,suppressed denitrifying bacteria activity,led to nitrate accumulation,and hindered simultaneous nitrification and denitrification(SND).Maintaining a DO concentration of 2 mg/L enhanced the removal of nitrogen and phosphorus while conserving energy.The combined process achieved removal efficiencies of 98.25%,90.49%,and 98.55%for chemical oxygen demand(COD),total nitrogen(TN),and total phosphorus(TP),respectively.Typical pollutants liquiritin(LQ)and glycyrrhizic acid(GA)were completely degraded.This study presents an innovative approach for the treatment of high-concentration organic wastewater and provides a reliable solution for the pollution control in utilization of CMRs resources.
文摘间歇生产过程具有弹性大、灵活等特点,其市场适应性较强。化工生产中间歇生产过程占相当比例,文章就间歇生产工艺的模拟与优化进行介绍,利用Aspen Batch Process Developer模拟间歇工艺过程,可以快速地得到工艺流程的物料衡算、热量衡算、操作时间、公用工程和成本估算等结果。同时,还可以对模拟结果进行分析,找出制约生产工艺的瓶颈,并对生产周期、生产规模、生产设备等进行优化,提高工艺设计效率,降低生产成本。
文摘In the past decades, on-line monitoring of batch processes using multi-way independent component analysis （MICA） has received considerable attention in both academia and industry. This paper focuses on two troublesome issues concerning selecting dominant independent components without a standard criterion and deter- mining the control limits of monitoring statistics in the presence of non-Gaussian distribution. To optimize the number of key independent components~ we introctuce-anoveiconcept of-system-cleviation, which is ab^e＇io＇evalu[ ate the reconstructed observations with different independent components. The monitored statistics arc transformed to Gaussian distribution data by means of Box-Cox transformation, which helps readily determine the control limits. The proposed method is applied to on-line monitoring of a fed-hatch penicillin fermentation simulator, and the ex- _perimental results indicate the advantages of the improved MICA monitoring compared to the conventional methods.
基金Supported by the National Natural Science Foundation of China （No.60421002）.
文摘Since there are not enough fault data in historical data sets, it is very difficult to diagnose faults for batch processes. In addition, a complete batch trajectory can be obtained till the end of its operation. In order to overcome the need for estimated or filled up future unmeasured values in the online fault diagnosis, sufficiently utilize the finite information of faults, and enhance the diagnostic performance, an improved multi-model Fisher discriminant analysis is represented. The trait of the proposed method is that the training data sets are made of the current measured information and the past major discriminant information, and not only the current information or the whole batch data. An industrial typical multi-stage streptomycin fermentation process is used to test the performance of fault diagnosis of the proposed method.
基金Supported by the National Natural Science Foundation of China （20536020, 20876056）.
文摘Chemical batch processes have become significant in chemical manufacturing. In these processes, large numbers of chemical products are produced to satisfy human demands in daily life. Recently, economy globalization has resulted, in growing worldwide competitions in tradi.tional chemical .process industry. In order to keep competitive in the global marketplace, each company must optimize its production management and set up a reactive system for market fluctuation. Scheduling is the core of production management in chemical processes. The goal of this paper is to review the recent developments in this challenging area. Classifications of batch scheduling problems and optimization methods are introduced. A comparison of six typical models is shown in a general benchmark example from the literature. Finally, challenges and applications in future research are discussed.
基金Supported by the National Natural Science Foundation of China （60404012, 60674064）, UK EPSRC （GR/N13319 and GR/R10875）, the National High Technology Research and Development Program of China （2007AA04Z193）, New Star of Science and Technology of Beijing City （2006A62）, and IBM China Research Lab 2007 UR-Program.
文摘A batch-to-batch optimal iterative learning control （ILC） strategy for the tracking control of product quality in batch processes is presented. The linear time-varying perturbation （LTVP） model is built for product quality around the nominal trajectories. To address problems of model-plant mismatches, model prediction errors in the previous batch run are added to the model predictions for the current batch run. Then tracking error transition models can be built, and the ILC law with direct error feedback is explicitly obtained, A rigorous theorem is proposed, to prove the convergence of tracking error under ILC, The proposed methodology is illustrated on a typical batch reactor and the results show that the performance of trajectory tracking is gradually improved by the ILC.
基金Supported by the National Creative Research Groups Science Foundation of China （60721062） and the National High Technology Research and Development Program of China （2007AA04Z162）.
文摘An iterative learning model predictive control （ILMPC） technique is applied to a class of continuous/batch processes. Such processes are characterized by the operations of batch processes generating periodic strong disturbances to the continuous processes and traditional regulatory controllers are unable to eliminate these periodic disturbances. ILMPC integrates the feature of iterative learning control （ILC） handling repetitive signal and the flexibility of model predictive control （MPC）. By on-line monitoring the operation status of batch processes, an event-driven iterative learning algorithm for batch repetitive disturbances is initiated and the soft constraints are adjusted timely as the feasible region is away from the desired operating zone. The results of an industrial application show that the proposed ILMPC method is effective for a class of continuous/batch processes.
基金Supported in part by NSFC/RGC joint Research Scheme （N-HKUST639/09）, the National Natural Science Foundation of China （61104058, 61273101）, Guangzhou Scientific and Technological Project （2012J5100032）, Nansha district independent innovation project （201103003）, China Postdoctoral Science Foundation （2012M511367, 2012M511368）, and Doctor Scientific Research Foundation of Liaoning Province （20121046）.
文摘Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes with actuator failures. This paper introduces relevant concepts of the fault-tolerant guaranteed cost control and formulates the robust iterative learning reliable guaranteed cost controller (ILRGCC). A significant advantage is that the proposed ILRGCC design method can be used for on-line optimization against batch-to-batch process uncertainties to realize robust tracking of set-point trajectory in time and batch-to-batch sequences. For the convenience of implementation, only measured output errors of current and previous cycles are used to design a synthetic controller for iterative learning control, consisting of dynamic output feedback plus feed-forward control. The proposed controller can not only guarantee the closed-loop convergency along time and cycle sequences but also satisfy the H∞performance level and a cost function with upper bounds for all admissible uncertainties and any actuator failures. Sufficient conditions for the controller solution are derived in terms of linear matrix inequalities (LMIs), and design procedures, which formulate a convex optimization problem with LMI constraints, are presented. An example of injection molding is given to illustrate the effectiveness and advantages of the ILRGCC design approach.
基金Supported by the National Natural Science Foundation of China (No.60504033).
文摘Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a new batch process monitoring and fault diagnosis method based on feature extract in Fisher subspace is proposed.The feature vector and the feature direction are extracted by projecting the high-dimension process data onto the low-dimension Fisher space. The similarity of feature vector between the current and the reference batch is calculated for on-line process monitoring and the contribution plot of weights in feature direction is calculated for fault diagnosis. The approach overcomes the need for estimating or tilling in the unknown portion of the process variables trajectories from the current time to the end of the batch. Simulation results on the benchmark model of penicillin fermentation process can demonstrate that in comparison to the MPCA method, the proposed method is more accurate and efficient for process monitoring and fault diagnosis.
基金Supported by the Guangzhou Scientific and Technological Project (2012J5100032)Nansha District Independent Innovation Project (201103003)
文摘Multi-way principal component analysis (MPCA) is the most widely utilized multivariate statistical process control method for batch processes. Previous research on MPCA has commonly agreed that it is not a suitable method for multiphase batch process analysis. In this paper, abundant phase information is revealed by way of partitioning MPCA model, and a new phase identification method based on global dynamic information is proposed. The application to injection molding shows that it is a feasible and effective method for multiphase batch process knowledge understanding, phase division and process monitoring.
基金This work was supported by the UK EPSRC (GR/N13319, GR/R10875).
文摘In this paper, the modelling and multi-objective optimal control of batch processes, using a recurrent neuro-fuzzy network, are presented. The recurrent neuro-fuzzy network, forms a ＂global＂ nonlinear long-range prediction model through the fuzzy conjunction of a number of ＂local＂ linear dynamic models. Network output is fed back to network input through one or more time delay units, which ensure that predictions from the recurrent neuro-fuzzy network are long-range. In building a recurrent neural network model, process knowledge is used initially to partition the processes non-linear characteristics into several local operating regions, and to aid in the initialisation of corresponding network weights. Process operational data is then used to train the network. Membership functions of the local regimes are identified, and local models are discovered via network training. Based on a recurrent neuro-fuzzy network model, a multi-objective optimal control policy can be obtained. The proposed technique is applied to a fed-batch reactor.
基金Supported in part by the State Key Development Program for Basic Research of China(2012CB720505)the National Natural Science Foundation of China(61174105,60874049)
文摘Based on the two-dimensional （2D） system theory, an integrated predictive iterative learning control （2D-IPILC） strategy for batch processes is presented. First, the output response and the error transition model predictions along the batch index can be calculated analytically due to the 2D Roesser model of the batch process. Then, an integrated framework of combining iterative learning control （ILC） and model predictive control （MPC） is formed reasonably. The output of feedforward ILC is estimated on the basis of the predefined process 2D model. By min- imizing a quadratic objective function, the feedback MPC is introduced to obtain better control performance for tracking problem of batch processes. Simulations on a typical batch reactor demonstrate that the satisfactory tracking performance as well as faster convergence speed can be achieved than traditional proportion type （P- t-we） ILC despite the model error and disturbances.
基金Supported by the National Natural Science Foundation of China(No.61763029)the Natural Science Foundation of Gansu Province(1610RJZA016)
文摘In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independent method, and in the feature extraction there is not fully taken into account the characterization of fault information, it will make the process monitoring ineffective, so a fault monitoring method based on WGNPE(weighted global neighborhood preserving embedding)–GSVDD(greedy support vector data description) related and independent variables is proposed. First, mutual information method is used to separate the related variables and independent variables. Secondly, WGNPE method is used to extract the local and global structures of the related variables in batch process and highlight the fault information, GSVDD method is used to extract the process information of the independent variables quickly and effectively. Finally, the statistical monitoring model is established to achieve process monitoring based on WGNPE and GSVDD. The effectiveness of the proposed method was verified by the penicillin fermentation process.
文摘In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to latent structure (MPLS) were proposed for on-line batch process monitoring. However, they are based on the decomposition of relative covariance matrix and strongly affected by outlying observations. In this paper, in view of an efficient projection pursuit algorithm, a robust statistical batch process monitoring (RSBPM) framework,which is resistant to outliers, is proposed to reduce the high demand for modeling data. The construction of robust normal operating condition model and robust control limits are discussed in detail. It is evaluated on monitoring an industrial streptomycin fermentation process and compared with the conventional MPCA. The results show that the RSBPM framework is resistant to possible outliers and the robustness is confirmed.
基金Supported by the National Natural Science Foundation of China(61374044)Shanghai Science Technology Commission(15510722100,16111106300)Shanghai Municipal Education Commission(14ZZ088)
文摘Considering the two-dimension(2 D) characteristic and the unknown optimal trajectory problem of the batch processes, an integrated model predictive control-iterative learning control(MPC-ILC) for batch processes is proposed in this paper. Firstly, the batch-axis information and time-axis information are combined into one quadratic performance index. It implies the integration of ILC and MPC algorithm idea, which leads to superior tracking performance and better robustness against disturbance and uncertainty. To address the problem of the unknown optimal trajectory, both time-varying prediction horizon and end product quality control are employed. Moreover, an integrated 2 D just-in-time learning(JITL) model is used to improve the predictive accuracy. Furthermore, rigorous description and proof are presented to prove the convergence and tracking performance of the proposed MPC-ILC strategy. The simulation results show the effectiveness of the proposed method.
基金Project (No. 60774067) supported by the National Natural ScienceFoundation of China
文摘In this paper, we describe a new batch process monitoring method based on multilevel independent component analysis and principal component analysis (MLICA-PCA). Unlike the conventional multi-way principal component analysis (MPCA) method, MLICA-PCA provides a separated interpretation for multilevel batch process data. Batch process data are partitioned into two levels: the within-batch level and the between-batch level. In each level, the Gaussian and non-Gaussian components of process information can be separately extracted. I2, T2 and SPE statistics are individually built and monitored. The new method facilitates fault diagnosis. Since the two variation levels are decomposed, the variables responsible for faults in each level can be identified and interpreted more easily. A case study of the Dupont benchmark process showed that the proposed method was more efficient and interpretable in fault detection and diagnosis, compared to the alternative batch process monitoring method.
