This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure.The design optimization study is conducted for cross-ply layups[0_(s)/90_(t)/0_(u)...This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure.The design optimization study is conducted for cross-ply layups[0_(s)/90_(t)/0_(u)],[0_(s)/90_(t)/0_(u)]s,[0_(s)/90_(t)]s and[90_(s)/0_(t)]s considering three uni-directional composites,i.e.Carbon/Epoxy,Glass/Epoxy,and Boron/Epoxy.The optimization study is performed by coupling a Multi-Objective Genetic Algorithm(MOGA)and Analytical Analysis.Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study.The objectives of the optimization are achieved under constraints on the Tsai-Wu,Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor.To verify the optimization approach,optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.展开更多
Fuel design is a complex multi-objective optimization problem in which facile and robust methods are urgently demanded.Herein,a complete workflow for designing a fuel blending scheme is presented,which is theoreticall...Fuel design is a complex multi-objective optimization problem in which facile and robust methods are urgently demanded.Herein,a complete workflow for designing a fuel blending scheme is presented,which is theoretically supported,efficient,and reliable.Based on the data distribution of the composition and properties of the blending fuels,a model of polynomial regression with appropriate hypothesis space was established.The parameters of the model were further optimized by different intelligence algorithms to achieve high-precision regression.Then,the design of a blending fuel was described as a multi-objective optimization problem,which was solved using a Nelder–Mead algorithm based on the concept of Pareto domination.Finally,the design of a target fuel was fully validated by experiments.This study provides new avenues for designing various blending fuels to meet the needs of next-generation engines.展开更多
This study uses the Neural Network(NN)technique to optimize design of surfacemounted Permanent Magnet Synchronous Motors(PMSMs)for More-Electric Aircraft(MEA)applications.The key role of NN is to provide dedicated cor...This study uses the Neural Network(NN)technique to optimize design of surfacemounted Permanent Magnet Synchronous Motors(PMSMs)for More-Electric Aircraft(MEA)applications.The key role of NN is to provide dedicated correction factors for the analytical PMSM mass and loss estimation within the entire design space.Based on that,a globally optimal design can be quickly obtained.Matching the analytical estimation with Finite-Element Analysis(FEA)is the main research target of training the NN.Conventional analytical formulae serve as the basis of this study,but they are prone to loss accuracy(especially for a large design space)due to their assumptions and simplifications.With the help of the trained NNs,the analytical motor model can give an estimation as accurate as the FEA but with super less time during the optimization process.The Average Correction Factor(ACF)approach is regarded as the comparison method to demonstrate the excellent performance of the proposed NN model.Furthermore,a NN aided three-stage-sevenstep optimization methodology is proposed.Finally,a Pole-10-Slot-12 PMSM case study is given to demonstrate the feasibility and gain of the NN aided multi-objective optimization approach.In this case,the NN aided analytical model can generate one motor design in 0.04 s while it takes more than 1 min for the used FEA model.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Task scheduling in cloud computing is a multi-objective optimization problem,often involving conflicting objectives such as minimizing execution time,reducing operational cost,and maximizing resource utilization.Howev...Task scheduling in cloud computing is a multi-objective optimization problem,often involving conflicting objectives such as minimizing execution time,reducing operational cost,and maximizing resource utilization.However,traditional approaches frequently rely on single-objective optimization methods which are insufficient for capturing the complexity of such problems.To address this limitation,we introduce MDMOSA(Multi-objective Dwarf Mongoose Optimization with Simulated Annealing),a hybrid that integrates multi-objective optimization for efficient task scheduling in Infrastructure-as-a-Service(IaaS)cloud environments.MDMOSA harmonizes the exploration capabilities of the biologically inspired Dwarf Mongoose Optimization(DMO)with the exploitation strengths of Simulated Annealing(SA),achieving a balanced search process.The algorithm aims to optimize task allocation by reducing makespan and financial cost while improving system resource utilization.We evaluate MDMOSA through extensive simulations using the real-world Google Cloud Jobs(GoCJ)dataset within the CloudSim environment.Comparative analysis against benchmarked algorithms such as SMOACO,MOTSGWO,and MFPAGWO reveals that MDMOSA consistently achieves superior performance in terms of scheduling efficiency,cost-effectiveness,and scalability.These results confirm the potential of MDMOSA as a robust and adaptable solution for resource scheduling in dynamic and heterogeneous cloud computing infrastructures.展开更多
In a wide range of engineering applications,complex constrained multi-objective optimization problems(CMOPs)present significant challenges,as the complexity of constraints often hampers algorithmic convergence and red...In a wide range of engineering applications,complex constrained multi-objective optimization problems(CMOPs)present significant challenges,as the complexity of constraints often hampers algorithmic convergence and reduces population diversity.To address these challenges,we propose a novel algorithm named Constraint IntensityDriven Evolutionary Multitasking(CIDEMT),which employs a two-stage,tri-task framework to dynamically integrates problem structure and knowledge transfer.In the first stage,three cooperative tasks are designed to explore the Constrained Pareto Front(CPF),the Unconstrained Pareto Front(UPF),and theε-relaxed constraint boundary,respectively.A CPF-UPF relationship classifier is employed to construct a problem-type-aware evolutionary strategy pool.At the end of the first stage,each task selects strategies from this strategy pool based on the specific type of problem,thereby guiding the subsequent evolutionary process.In the second stage,while each task continues to evolve,aτ-driven knowledge transfer mechanism is introduced to selectively incorporate effective solutions across tasks.enhancing the convergence and feasibility of the main task.Extensive experiments conducted on 32 benchmark problems from three test suites(LIRCMOP,DASCMOP,and DOC)demonstrate that CIDEMT achieves the best Inverted Generational Distance(IGD)values on 24 problems and the best Hypervolume values(HV)on 22 problems.Furthermore,CIDEMT significantly outperforms six state-of-the-art constrained multi-objective evolutionary algorithms(CMOEAs).These results confirm CIDEMT’s superiority in promoting convergence,diversity,and robustness in solving complex CMOPs.展开更多
Community detection is one of the most fundamental applications in understanding the structure of complicated networks.Furthermore,it is an important approach to identifying closely linked clusters of nodes that may r...Community detection is one of the most fundamental applications in understanding the structure of complicated networks.Furthermore,it is an important approach to identifying closely linked clusters of nodes that may represent underlying patterns and relationships.Networking structures are highly sensitive in social networks,requiring advanced techniques to accurately identify the structure of these communities.Most conventional algorithms for detecting communities perform inadequately with complicated networks.In addition,they miss out on accurately identifying clusters.Since single-objective optimization cannot always generate accurate and comprehensive results,as multi-objective optimization can.Therefore,we utilized two objective functions that enable strong connections between communities and weak connections between them.In this study,we utilized the intra function,which has proven effective in state-of-the-art research studies.We proposed a new inter-function that has demonstrated its effectiveness by making the objective of detecting external connections between communities is to make them more distinct and sparse.Furthermore,we proposed a Multi-Objective community strength enhancement algorithm(MOCSE).The proposed algorithm is based on the framework of the Multi-Objective Evolutionary Algorithm with Decomposition(MOEA/D),integrated with a new heuristic mutation strategy,community strength enhancement(CSE).The results demonstrate that the model is effective in accurately identifying community structures while also being computationally efficient.The performance measures used to evaluate the MOEA/D algorithm in our work are normalized mutual information(NMI)and modularity(Q).It was tested using five state-of-the-art algorithms on social networks,comprising real datasets(Zachary,Dolphin,Football,Krebs,SFI,Jazz,and Netscience),as well as twenty synthetic datasets.These results provide the robustness and practical value of the proposed algorithm in multi-objective community identification.展开更多
Visible lighting and energy-saving are dual needs of energy efficiency and occupant comfort in modern buildings.In this study,a smart window based on phase-change material VO_(2) is designed and optimized to address t...Visible lighting and energy-saving are dual needs of energy efficiency and occupant comfort in modern buildings.In this study,a smart window based on phase-change material VO_(2) is designed and optimized to address the critical challenges in building energy management.The proposed phase-adaptive radiative(PAR)coating is a multilayer nanostructure consisting of TiO/VO_(2)2/TiO/Ag_(2) and polydimethylsiloxane(PDMS).For different VO_(2) phases,visible transmittance T_(vis)>0.6 and emissivity difference in the atmospheric window Δε_(AW)=0.422 can be achieved,which means the PAR window can transfer interior heat to the outside through thermal radiation for cooling or minimize thermal emission for insulation,while ensuring the transmission of visible light for natural daylighting.Compared to normal glass,the PAR window has an average temperature drop of 14.8℃.The year-round energy-saving calculation for four different cities in China indicates that the PAR window can save 22%-32% of the annual cooling and heating energy consumption by seamlessly transitioning between two phases of VO_(2)modes.The multi-objective optimization of the phase-adaptive radiative smart window provides a potential strategy for energy saving.展开更多
Vehicle Edge Computing(VEC)and Cloud Computing(CC)significantly enhance the processing efficiency of delay-sensitive and computation-intensive applications by offloading compute-intensive tasks from resource-constrain...Vehicle Edge Computing(VEC)and Cloud Computing(CC)significantly enhance the processing efficiency of delay-sensitive and computation-intensive applications by offloading compute-intensive tasks from resource-constrained onboard devices to nearby Roadside Unit(RSU),thereby achieving lower delay and energy consumption.However,due to the limited storage capacity and energy budget of RSUs,it is challenging to meet the demands of the highly dynamic Internet of Vehicles(IoV)environment.Therefore,determining reasonable service caching and computation offloading strategies is crucial.To address this,this paper proposes a joint service caching scheme for cloud-edge collaborative IoV computation offloading.By modeling the dynamic optimization problem using Markov Decision Processes(MDP),the scheme jointly optimizes task delay,energy consumption,load balancing,and privacy entropy to achieve better quality of service.Additionally,a dynamic adaptive multi-objective deep reinforcement learning algorithm is proposed.Each Double Deep Q-Network(DDQN)agent obtains rewards for different objectives based on distinct reward functions and dynamically updates the objective weights by learning the value changes between objectives using Radial Basis Function Networks(RBFN),thereby efficiently approximating the Pareto-optimal decisions for multiple objectives.Extensive experiments demonstrate that the proposed algorithm can better coordinate the three-tier computing resources of cloud,edge,and vehicles.Compared to existing algorithms,the proposed method reduces task delay and energy consumption by 10.64%and 5.1%,respectively.展开更多
Rapid urbanization in China has led to spatial antagonism between urban development and farmland protection and ecological security maintenance.Multi-objective spatial collaborative optimization is a powerful method f...Rapid urbanization in China has led to spatial antagonism between urban development and farmland protection and ecological security maintenance.Multi-objective spatial collaborative optimization is a powerful method for achieving sustainable regional development.Previous studies on multi-objective spatial optimization do not involve spatial corrections to simulation results based on the natural endowment of space resources.This study proposes an Ecological Security-Food Security-Urban Sustainable Development(ES-FS-USD)spatial optimization framework.This framework combines the non-dominated sorting genetic algorithm II(NSGA-II)and patch-generating land use simulation(PLUS)model with an ecological protection importance evaluation,comprehensive agricultural productivity evaluation,and urban sustainable development potential assessment and optimizes the territorial space in the Yangtze River Delta(YRD)region in 2035.The proposed sustainable development(SD)scenario can effectively reduce the destruction of landscape patterns of various land-use types while considering both ecological and economic benefits.The simulation results were further revised by evaluating the land-use suitability of the YRD region.According to the revised spatial pattern for the YRD in 2035,the farmland area accounts for 43.59%of the total YRD,which is 5.35%less than that in 2010.Forest,grassland,and water area account for 40.46%of the total YRD—an increase of 1.42%compared with the case in 2010.Construction land accounts for 14.72%of the total YRD—an increase of 2.77%compared with the case in 2010.The ES-FS-USD spatial optimization framework ensures that spatial optimization outcomes are aligned with the natural endowments of land resources,thereby promoting the sustainable use of land resources,improving the ability of spatial management,and providing valuable insights for decision makers.展开更多
This paper introduces a hybrid multi-objective optimization algorithm,designated HMODESFO,which amalgamates the exploratory prowess of Differential Evolution(DE)with the rapid convergence attributes of the Sailfish Op...This paper introduces a hybrid multi-objective optimization algorithm,designated HMODESFO,which amalgamates the exploratory prowess of Differential Evolution(DE)with the rapid convergence attributes of the Sailfish Optimization(SFO)algorithm.The primary objective is to address multi-objective optimization challenges within mechanical engineering,with a specific emphasis on planetary gearbox optimization.The algorithm is equipped with the ability to dynamically select the optimal mutation operator,contingent upon an adaptive normalized population spacing parameter.The efficacy of HMODESFO has been substantiated through rigorous validation against estab-lished industry benchmarks,including a suite of Zitzler-Deb-Thiele(ZDT)and Zeb-Thiele-Laumanns-Zitzler(DTLZ)problems,where it exhibited superior performance.The outcomes underscore the algorithm’s markedly enhanced optimization capabilities relative to existing methods,particularly in tackling highly intricate multi-objective planetary gearbox optimization problems.Additionally,the performance of HMODESFO is evaluated against selected well-known mechanical engineering test problems,further accentuating its adeptness in resolving complex optimization challenges within this domain.展开更多
This paper presents a novel artificial intelligence(AI)-assisted two-stage method for optimising rock slope stability by integrating advanced 3D modelling with rock support design,aiming at minimising risks,material u...This paper presents a novel artificial intelligence(AI)-assisted two-stage method for optimising rock slope stability by integrating advanced 3D modelling with rock support design,aiming at minimising risks,material usage,and costs.In the first stage,an extended key block analysis identifies key blocks and key block groups,accounting for progressive failure and force interactions.The second stage uses AI algorithms to optimise rockbolting design,balancing stability,cost,and material use.The most efficient algorithms include the multi-objective tree-structured Parzen estimator(MOTPE)and non-dominated sorting genetic algorithms(NSGA-II and NSGA-III).Applied to the Larvik rock slope,the optimised solution uses 18 pre-tensioned cablebolts,providing 13.2 MN of active force and achieving a factor of safety of 1.31 while reducing the average anchorage length by approximately 16%compared to traditional design.The AI-assisted approach also reduces computation time by over 90%compared to Quasi-Monte Carlo(QMC)methods,demonstrating its efficiency for small-scale civil engineering projects and large-scale mining operations.The developed tool is practical,compatible with Building Information Modelling(BIM),and ready for engineering implementation,supporting sustainable and cost-effective rock slope stabilisation.While the method is largely automated,professional judgement remains crucial for verifying ground conditions and selecting the final solution.Future work will focus on integrating data uncertainties,addressing complex block deformation mechanisms,refining optimisation objectives,and improving the performance of multi-objective optimisation for slope rockboling applications to further enhance the method's versatility.展开更多
Cobalt phosphide has been successfully used as a catalyst in the production of ammonia from nitric acid.Substituting appropriate atoms is expected to further improve its catalytic performance.Owing to the diversity of...Cobalt phosphide has been successfully used as a catalyst in the production of ammonia from nitric acid.Substituting appropriate atoms is expected to further improve its catalytic performance.Owing to the diversity of substituting elements,substitution sites,adsorption sites,and adsorption configurations,extensive time-consuming simulation calculations are required for the high-throughput screening method.Additionally,multi-objective attributes should be considered simultaneously in catalytic design.To tackle this challenge,this paper suggests a multi-objective cobalt phosphide catalytic material design method based on surrogate models.And the effectiveness of the proposed method was validated through comparative experiments.The proposed method led to the discovery of fifteen promising cobalt phosphide catalyst configurations.This study provides a new avenue for expediting the design of catalyst,with the potential for application in other systems.展开更多
Finding an optimal isolator arrangement for asymmetric structures using traditional conceptual design methods that can significantly minimize torsional response while ensuring efficient horizontal seismic isolation is...Finding an optimal isolator arrangement for asymmetric structures using traditional conceptual design methods that can significantly minimize torsional response while ensuring efficient horizontal seismic isolation is cumbersome and inefficient.Thus,this work develops a multi-objective optimization method to enhance the torsional resistance of asymmetric base-isolated structures.The primary objective is to simultaneously minimize the interstory rotation of the superstructure,the rotation of the isolation layer,and the interstory displacement of the superstructure without exceeding the isolator displacement limits.A fast non-dominated sorting genetic algorithm(NSGA-Ⅱ)is employed to satisfy this optimization objective.Subsequently,the isolator arrangement,encompassing both positions and categories,is optimized according to this multi-objective optimization method.Additionally,an optimization design platform is developed to streamline the design operation.This platform integrates the input of optimization parameters,the output of optimization results,the finite element analysis,and the multi-objective optimization method proposed herein.Finally,the application of this multi-objective optimization method and its associated platform are demonstrated on two asymmetric base-isolated structures of varying heights and plan configurations.The results indicate that the optimal isolator arrangement derived from the optimization method can further improve the control over the lateral and torsional responses of asymmetric base-isolated structures compared to conventional conceptual design methods.Notably,the interstory rotation of the optimal base-isolated structure is significantly reduced,constituting only approximately 33.7%of that observed in the original base-isolated structure.The proposed platform facilitates the automatic generation of the optimal design scheme for the isolators of asymmetric base-isolated structures,offering valuable insights and guidance for the burgeoning field of intelligent civil engineering design.展开更多
Biological load-bearing materials,like the nacre in shells,have a unique staggered structure that supports their superior mechanical properties.Engineers have been encouraged to imitate it to create load-bearing bio-i...Biological load-bearing materials,like the nacre in shells,have a unique staggered structure that supports their superior mechanical properties.Engineers have been encouraged to imitate it to create load-bearing bio-inspired materials which have excellent properties not present in conventional composites.To create such materials with desirable mechanical properties,the optimum structural parameters combination must be selected.Moreover,the optimal design of bio-inspired composites needs to take into account the trade-offs between various mechanical properties.In this paper,multi-objective optimization models were developed using structural parameters as design variables and mechanical properties as optimization objectives,including stiffness,strength,toughness,and dynamic damping.Using the NSGA-II optimization algorithm,a set of optimal solutions were solved.Additionally,three different structures in natural nacre were introduced in order to utilize the better structure when design bio-inspired materials.The range of optimal solutions that obtained using results from previous research were examined and explained why this collection of optimal solution ranges is better.Also,optimal solutions were compared with the structural features and mechanical properties of real nacre and artificial biomimetic composites to validate our models.Finally,the optimum design strategies can be obtained for nacre-like composites.Our research methodically proposes an optimization method for achieving load-bearing bio-inspired materials with excellent properties and creates a set of optimal solutions from which designers can select the one that best suits their preferences,allowing the fabricated materials to demonstrate preferred performance.展开更多
Multi-objective optimization is critical for problem-solving in engineering,economics,and AI.This study introduces the Multi-Objective Chef-Based Optimization Algorithm(MOCBOA),an upgraded version of the Chef-Based Op...Multi-objective optimization is critical for problem-solving in engineering,economics,and AI.This study introduces the Multi-Objective Chef-Based Optimization Algorithm(MOCBOA),an upgraded version of the Chef-Based Optimization Algorithm(CBOA)that addresses distinct objectives.Our approach is unique in systematically examining four dominance relations—Pareto,Epsilon,Cone-epsilon,and Strengthened dominance—to evaluate their influence on sustaining solution variety and driving convergence toward the Pareto front.Our comparison investigation,which was conducted on fifty test problems from the CEC 2021 benchmark and applied to areas such as chemical engineering,mechanical design,and power systems,reveals that the dominance approach used has a considerable impact on the key optimization measures such as the hypervolume metric.This paper provides a solid foundation for determining themost effective dominance approach and significant insights for both theoretical research and practical applications in multi-objective optimization.展开更多
Due to the growing needs of strengthening steel tubular truss,a new method for enhancing tubular joints by partially filling the chord with grout is proposed.However,the strengthening design of a whole truss is a chal...Due to the growing needs of strengthening steel tubular truss,a new method for enhancing tubular joints by partially filling the chord with grout is proposed.However,the strengthening design of a whole truss is a challenging task,mainly because of multiple design objectives and various fabrication uncertainties.Current practice based on empirical or simple rule-based strategies is not able to handle the task.To address this challenge,a design framework for tubular truss strengthening is developed.The proposed framework can reduce the maximum deflection,improve the load capacities of the truss,and minimize the usage of grout.Furthermore,it considers geometric and modeling uncertainties through Monte Carlo simulation and predict intervals,thereby preventing over-idealization during practical optimization.To demonstrate the proposed design framework,a comparative structural analysis was conducted on a typical Warren truss between pre-and post-optimal strengthen.The results show that,by building upon the Machine Learning models,the proposed framework can produce an effective strengthening scheme.After considering uncertainties in optimization,some idealized samples are filtered out,resulting in a more practical strengthening scheme.The proposed framework is versatile and can be applied to other similar optimal strengthening designs with minimal additional effort.展开更多
For dealing with the multi-objective optimization problems of parametric design for aircraft, a novel hybrid parallel multi-objective tabu search （HPMOTS） algorithm is used. First, a new multi-objective tabu search ...For dealing with the multi-objective optimization problems of parametric design for aircraft, a novel hybrid parallel multi-objective tabu search （HPMOTS） algorithm is used. First, a new multi-objective tabu search （MOTS） algorithm is proposed. Comparing with the traditional MOTS algorithm, this proposed algorithm adds some new methods such as the combination of MOTS algorithm and ＂Pareto solution＂, the strategy of ＂searching from many directions＂ and the reservation of good solutions. Second, this article also proposes the improved parallel multi-objective tabu search （PMOTS） algorithm. Finally, a new hybrid algorithm--HPMOTS algorithm which combines the PMOTS algorithm with the non-dominated sorting-based multi-objective genetic algorithm （NSGA） is presented. The computing results of these algorithms are compared with each other and it is shown that the optimal result can be obtained by the HPMOTS algorithm and the computing result of the PMOTS algorithm is better than that of MOTS algorithm.展开更多
Over the past several decades,a variety of technical ways have been developed in seismic retrofitting of existing reinforced concrete frames(RFs).Among them,pin-supported rocking walls(PWs)have received much attention...Over the past several decades,a variety of technical ways have been developed in seismic retrofitting of existing reinforced concrete frames(RFs).Among them,pin-supported rocking walls(PWs)have received much attentions to researchers recently.However,it is still a challenge that how to determine the stiffness demand of PWs and assign the value of the drift concentration factor(DCF)for entire systems rationally and efficiently.In this paper,a design method has been exploited for seismic retrofitting of existing RFs using PWs(RF-PWs)via a multi-objective evolutionary algorithm.Then,the method has been investigated and verified through a practical project.Finally,a parametric analysis was executed to exhibit the strengths and working mechanism of the multi-objective design method.To sum up,the findings of this investigation show that the method furnished in this paper is feasible,functional and can provide adequate information for determining the stiffness demand and the value of the DCFfor PWs.Furthermore,it can be applied for the preliminary design of these kinds of structures.展开更多
Multi-objective optimization for the optimum shape design is introduced in aerodynamics using the Game theory. Based on the control theory, the employed optimizer and the negative feedback are used to implement the co...Multi-objective optimization for the optimum shape design is introduced in aerodynamics using the Game theory. Based on the control theory, the employed optimizer and the negative feedback are used to implement the constraints. All the constraints are satisfied implicitly and automatically in the design. Furthermore,the above methodology is combined with a formulation derived from the Game theory to treat multi-point airfoil optimization. Airfoil shapes are optimized according to various aerodynamics criteria. In the symmetric Nash game, each “player” is responsible for one criterion, and the Nash equilibrium provides a solution to the multipoint optimization. Design results confirm the efficiency of the method.展开更多
基金supported by the National Natural Science Foundation of China research grant“Study on the characteristic motion and load of bubbles near a solid boundary in shear flows”(51679056)Natural Science Foundation of Heilongjiang Province of China(E2016024).
文摘This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure.The design optimization study is conducted for cross-ply layups[0_(s)/90_(t)/0_(u)],[0_(s)/90_(t)/0_(u)]s,[0_(s)/90_(t)]s and[90_(s)/0_(t)]s considering three uni-directional composites,i.e.Carbon/Epoxy,Glass/Epoxy,and Boron/Epoxy.The optimization study is performed by coupling a Multi-Objective Genetic Algorithm(MOGA)and Analytical Analysis.Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study.The objectives of the optimization are achieved under constraints on the Tsai-Wu,Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor.To verify the optimization approach,optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.
基金the support from the National Key R&D Program of China(No.2021YFC2103701)the National Natural Science Foundation of China(No.22178248)the Haihe Laboratory of Sustainable Chemical Transformations。
文摘Fuel design is a complex multi-objective optimization problem in which facile and robust methods are urgently demanded.Herein,a complete workflow for designing a fuel blending scheme is presented,which is theoretically supported,efficient,and reliable.Based on the data distribution of the composition and properties of the blending fuels,a model of polynomial regression with appropriate hypothesis space was established.The parameters of the model were further optimized by different intelligence algorithms to achieve high-precision regression.Then,the design of a blending fuel was described as a multi-objective optimization problem,which was solved using a Nelder–Mead algorithm based on the concept of Pareto domination.Finally,the design of a target fuel was fully validated by experiments.This study provides new avenues for designing various blending fuels to meet the needs of next-generation engines.
基金funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 Research and Innovation Programme(No 807081)。
文摘This study uses the Neural Network(NN)technique to optimize design of surfacemounted Permanent Magnet Synchronous Motors(PMSMs)for More-Electric Aircraft(MEA)applications.The key role of NN is to provide dedicated correction factors for the analytical PMSM mass and loss estimation within the entire design space.Based on that,a globally optimal design can be quickly obtained.Matching the analytical estimation with Finite-Element Analysis(FEA)is the main research target of training the NN.Conventional analytical formulae serve as the basis of this study,but they are prone to loss accuracy(especially for a large design space)due to their assumptions and simplifications.With the help of the trained NNs,the analytical motor model can give an estimation as accurate as the FEA but with super less time during the optimization process.The Average Correction Factor(ACF)approach is regarded as the comparison method to demonstrate the excellent performance of the proposed NN model.Furthermore,a NN aided three-stage-sevenstep optimization methodology is proposed.Finally,a Pole-10-Slot-12 PMSM case study is given to demonstrate the feasibility and gain of the NN aided multi-objective optimization approach.In this case,the NN aided analytical model can generate one motor design in 0.04 s while it takes more than 1 min for the used FEA model.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
文摘Task scheduling in cloud computing is a multi-objective optimization problem,often involving conflicting objectives such as minimizing execution time,reducing operational cost,and maximizing resource utilization.However,traditional approaches frequently rely on single-objective optimization methods which are insufficient for capturing the complexity of such problems.To address this limitation,we introduce MDMOSA(Multi-objective Dwarf Mongoose Optimization with Simulated Annealing),a hybrid that integrates multi-objective optimization for efficient task scheduling in Infrastructure-as-a-Service(IaaS)cloud environments.MDMOSA harmonizes the exploration capabilities of the biologically inspired Dwarf Mongoose Optimization(DMO)with the exploitation strengths of Simulated Annealing(SA),achieving a balanced search process.The algorithm aims to optimize task allocation by reducing makespan and financial cost while improving system resource utilization.We evaluate MDMOSA through extensive simulations using the real-world Google Cloud Jobs(GoCJ)dataset within the CloudSim environment.Comparative analysis against benchmarked algorithms such as SMOACO,MOTSGWO,and MFPAGWO reveals that MDMOSA consistently achieves superior performance in terms of scheduling efficiency,cost-effectiveness,and scalability.These results confirm the potential of MDMOSA as a robust and adaptable solution for resource scheduling in dynamic and heterogeneous cloud computing infrastructures.
基金supported by the National Natural Science Foundation of China under Grant No.61972040the Science and Technology Research and Development Project funded by China Railway Material Trade Group Luban Company.
文摘In a wide range of engineering applications,complex constrained multi-objective optimization problems(CMOPs)present significant challenges,as the complexity of constraints often hampers algorithmic convergence and reduces population diversity.To address these challenges,we propose a novel algorithm named Constraint IntensityDriven Evolutionary Multitasking(CIDEMT),which employs a two-stage,tri-task framework to dynamically integrates problem structure and knowledge transfer.In the first stage,three cooperative tasks are designed to explore the Constrained Pareto Front(CPF),the Unconstrained Pareto Front(UPF),and theε-relaxed constraint boundary,respectively.A CPF-UPF relationship classifier is employed to construct a problem-type-aware evolutionary strategy pool.At the end of the first stage,each task selects strategies from this strategy pool based on the specific type of problem,thereby guiding the subsequent evolutionary process.In the second stage,while each task continues to evolve,aτ-driven knowledge transfer mechanism is introduced to selectively incorporate effective solutions across tasks.enhancing the convergence and feasibility of the main task.Extensive experiments conducted on 32 benchmark problems from three test suites(LIRCMOP,DASCMOP,and DOC)demonstrate that CIDEMT achieves the best Inverted Generational Distance(IGD)values on 24 problems and the best Hypervolume values(HV)on 22 problems.Furthermore,CIDEMT significantly outperforms six state-of-the-art constrained multi-objective evolutionary algorithms(CMOEAs).These results confirm CIDEMT’s superiority in promoting convergence,diversity,and robustness in solving complex CMOPs.
文摘Community detection is one of the most fundamental applications in understanding the structure of complicated networks.Furthermore,it is an important approach to identifying closely linked clusters of nodes that may represent underlying patterns and relationships.Networking structures are highly sensitive in social networks,requiring advanced techniques to accurately identify the structure of these communities.Most conventional algorithms for detecting communities perform inadequately with complicated networks.In addition,they miss out on accurately identifying clusters.Since single-objective optimization cannot always generate accurate and comprehensive results,as multi-objective optimization can.Therefore,we utilized two objective functions that enable strong connections between communities and weak connections between them.In this study,we utilized the intra function,which has proven effective in state-of-the-art research studies.We proposed a new inter-function that has demonstrated its effectiveness by making the objective of detecting external connections between communities is to make them more distinct and sparse.Furthermore,we proposed a Multi-Objective community strength enhancement algorithm(MOCSE).The proposed algorithm is based on the framework of the Multi-Objective Evolutionary Algorithm with Decomposition(MOEA/D),integrated with a new heuristic mutation strategy,community strength enhancement(CSE).The results demonstrate that the model is effective in accurately identifying community structures while also being computationally efficient.The performance measures used to evaluate the MOEA/D algorithm in our work are normalized mutual information(NMI)and modularity(Q).It was tested using five state-of-the-art algorithms on social networks,comprising real datasets(Zachary,Dolphin,Football,Krebs,SFI,Jazz,and Netscience),as well as twenty synthetic datasets.These results provide the robustness and practical value of the proposed algorithm in multi-objective community identification.
基金supported by the Fundamental Research Funds for the Provincial Universities (Grant No.2024-KYYWF-0141)the National Natural Science Foundation of China (Grant Nos.52406076,52227813)+1 种基金the National Key Research and Development Program of China (Grant No.2022YFE0133900)the China Postdoctoral Science Foundation (Grant No.2023M740905)。
文摘Visible lighting and energy-saving are dual needs of energy efficiency and occupant comfort in modern buildings.In this study,a smart window based on phase-change material VO_(2) is designed and optimized to address the critical challenges in building energy management.The proposed phase-adaptive radiative(PAR)coating is a multilayer nanostructure consisting of TiO/VO_(2)2/TiO/Ag_(2) and polydimethylsiloxane(PDMS).For different VO_(2) phases,visible transmittance T_(vis)>0.6 and emissivity difference in the atmospheric window Δε_(AW)=0.422 can be achieved,which means the PAR window can transfer interior heat to the outside through thermal radiation for cooling or minimize thermal emission for insulation,while ensuring the transmission of visible light for natural daylighting.Compared to normal glass,the PAR window has an average temperature drop of 14.8℃.The year-round energy-saving calculation for four different cities in China indicates that the PAR window can save 22%-32% of the annual cooling and heating energy consumption by seamlessly transitioning between two phases of VO_(2)modes.The multi-objective optimization of the phase-adaptive radiative smart window provides a potential strategy for energy saving.
基金supported by Key Science and Technology Program of Henan Province,China(Grant Nos.242102210147,242102210027)Fujian Province Young and Middle aged Teacher Education Research Project(Science and Technology Category)(No.JZ240101)(Corresponding author:Dong Yuan).
文摘Vehicle Edge Computing(VEC)and Cloud Computing(CC)significantly enhance the processing efficiency of delay-sensitive and computation-intensive applications by offloading compute-intensive tasks from resource-constrained onboard devices to nearby Roadside Unit(RSU),thereby achieving lower delay and energy consumption.However,due to the limited storage capacity and energy budget of RSUs,it is challenging to meet the demands of the highly dynamic Internet of Vehicles(IoV)environment.Therefore,determining reasonable service caching and computation offloading strategies is crucial.To address this,this paper proposes a joint service caching scheme for cloud-edge collaborative IoV computation offloading.By modeling the dynamic optimization problem using Markov Decision Processes(MDP),the scheme jointly optimizes task delay,energy consumption,load balancing,and privacy entropy to achieve better quality of service.Additionally,a dynamic adaptive multi-objective deep reinforcement learning algorithm is proposed.Each Double Deep Q-Network(DDQN)agent obtains rewards for different objectives based on distinct reward functions and dynamically updates the objective weights by learning the value changes between objectives using Radial Basis Function Networks(RBFN),thereby efficiently approximating the Pareto-optimal decisions for multiple objectives.Extensive experiments demonstrate that the proposed algorithm can better coordinate the three-tier computing resources of cloud,edge,and vehicles.Compared to existing algorithms,the proposed method reduces task delay and energy consumption by 10.64%and 5.1%,respectively.
基金National Natural Science Foundation of China,No.42301470,No.52270185,No.42171389Capacity Building Program of Local Colleges and Universities in Shanghai,No.21010503300。
文摘Rapid urbanization in China has led to spatial antagonism between urban development and farmland protection and ecological security maintenance.Multi-objective spatial collaborative optimization is a powerful method for achieving sustainable regional development.Previous studies on multi-objective spatial optimization do not involve spatial corrections to simulation results based on the natural endowment of space resources.This study proposes an Ecological Security-Food Security-Urban Sustainable Development(ES-FS-USD)spatial optimization framework.This framework combines the non-dominated sorting genetic algorithm II(NSGA-II)and patch-generating land use simulation(PLUS)model with an ecological protection importance evaluation,comprehensive agricultural productivity evaluation,and urban sustainable development potential assessment and optimizes the territorial space in the Yangtze River Delta(YRD)region in 2035.The proposed sustainable development(SD)scenario can effectively reduce the destruction of landscape patterns of various land-use types while considering both ecological and economic benefits.The simulation results were further revised by evaluating the land-use suitability of the YRD region.According to the revised spatial pattern for the YRD in 2035,the farmland area accounts for 43.59%of the total YRD,which is 5.35%less than that in 2010.Forest,grassland,and water area account for 40.46%of the total YRD—an increase of 1.42%compared with the case in 2010.Construction land accounts for 14.72%of the total YRD—an increase of 2.77%compared with the case in 2010.The ES-FS-USD spatial optimization framework ensures that spatial optimization outcomes are aligned with the natural endowments of land resources,thereby promoting the sustainable use of land resources,improving the ability of spatial management,and providing valuable insights for decision makers.
基金supported by the Serbian Ministry of Education and Science under Grant No.TR35006 and COST Action:CA23155—A Pan-European Network of Ocean Tribology(OTC)The research of B.Rosic and M.Rosic was supported by the Serbian Ministry of Education and Science under Grant TR35029.
文摘This paper introduces a hybrid multi-objective optimization algorithm,designated HMODESFO,which amalgamates the exploratory prowess of Differential Evolution(DE)with the rapid convergence attributes of the Sailfish Optimization(SFO)algorithm.The primary objective is to address multi-objective optimization challenges within mechanical engineering,with a specific emphasis on planetary gearbox optimization.The algorithm is equipped with the ability to dynamically select the optimal mutation operator,contingent upon an adaptive normalized population spacing parameter.The efficacy of HMODESFO has been substantiated through rigorous validation against estab-lished industry benchmarks,including a suite of Zitzler-Deb-Thiele(ZDT)and Zeb-Thiele-Laumanns-Zitzler(DTLZ)problems,where it exhibited superior performance.The outcomes underscore the algorithm’s markedly enhanced optimization capabilities relative to existing methods,particularly in tackling highly intricate multi-objective planetary gearbox optimization problems.Additionally,the performance of HMODESFO is evaluated against selected well-known mechanical engineering test problems,further accentuating its adeptness in resolving complex optimization challenges within this domain.
基金support from Research Council of Norway via STIPINST PhD grant(Grant No.323307),Bever Control AS,and Bane NOR.
文摘This paper presents a novel artificial intelligence(AI)-assisted two-stage method for optimising rock slope stability by integrating advanced 3D modelling with rock support design,aiming at minimising risks,material usage,and costs.In the first stage,an extended key block analysis identifies key blocks and key block groups,accounting for progressive failure and force interactions.The second stage uses AI algorithms to optimise rockbolting design,balancing stability,cost,and material use.The most efficient algorithms include the multi-objective tree-structured Parzen estimator(MOTPE)and non-dominated sorting genetic algorithms(NSGA-II and NSGA-III).Applied to the Larvik rock slope,the optimised solution uses 18 pre-tensioned cablebolts,providing 13.2 MN of active force and achieving a factor of safety of 1.31 while reducing the average anchorage length by approximately 16%compared to traditional design.The AI-assisted approach also reduces computation time by over 90%compared to Quasi-Monte Carlo(QMC)methods,demonstrating its efficiency for small-scale civil engineering projects and large-scale mining operations.The developed tool is practical,compatible with Building Information Modelling(BIM),and ready for engineering implementation,supporting sustainable and cost-effective rock slope stabilisation.While the method is largely automated,professional judgement remains crucial for verifying ground conditions and selecting the final solution.Future work will focus on integrating data uncertainties,addressing complex block deformation mechanisms,refining optimisation objectives,and improving the performance of multi-objective optimisation for slope rockboling applications to further enhance the method's versatility.
基金supported by the Jiangxi Provincial Natural Science Foundation(No.20224BAB212022)Science and Technology Project of Education Department of Jiangxi Province(No.GJJ211435)+3 种基金the National Key Research and Development Program of China(No.2021YFA1400204)the Project of China Postdoctoral Science Foundation(No.2022M712909)the Natural Science Foundation of China(No.21603109)the Henan Joint Fund of the National Natural Science Foundation of China(No.U1404216)。
文摘Cobalt phosphide has been successfully used as a catalyst in the production of ammonia from nitric acid.Substituting appropriate atoms is expected to further improve its catalytic performance.Owing to the diversity of substituting elements,substitution sites,adsorption sites,and adsorption configurations,extensive time-consuming simulation calculations are required for the high-throughput screening method.Additionally,multi-objective attributes should be considered simultaneously in catalytic design.To tackle this challenge,this paper suggests a multi-objective cobalt phosphide catalytic material design method based on surrogate models.And the effectiveness of the proposed method was validated through comparative experiments.The proposed method led to the discovery of fifteen promising cobalt phosphide catalyst configurations.This study provides a new avenue for expediting the design of catalyst,with the potential for application in other systems.
基金National Natural Science Foundation of China under Grant No.52278490。
文摘Finding an optimal isolator arrangement for asymmetric structures using traditional conceptual design methods that can significantly minimize torsional response while ensuring efficient horizontal seismic isolation is cumbersome and inefficient.Thus,this work develops a multi-objective optimization method to enhance the torsional resistance of asymmetric base-isolated structures.The primary objective is to simultaneously minimize the interstory rotation of the superstructure,the rotation of the isolation layer,and the interstory displacement of the superstructure without exceeding the isolator displacement limits.A fast non-dominated sorting genetic algorithm(NSGA-Ⅱ)is employed to satisfy this optimization objective.Subsequently,the isolator arrangement,encompassing both positions and categories,is optimized according to this multi-objective optimization method.Additionally,an optimization design platform is developed to streamline the design operation.This platform integrates the input of optimization parameters,the output of optimization results,the finite element analysis,and the multi-objective optimization method proposed herein.Finally,the application of this multi-objective optimization method and its associated platform are demonstrated on two asymmetric base-isolated structures of varying heights and plan configurations.The results indicate that the optimal isolator arrangement derived from the optimization method can further improve the control over the lateral and torsional responses of asymmetric base-isolated structures compared to conventional conceptual design methods.Notably,the interstory rotation of the optimal base-isolated structure is significantly reduced,constituting only approximately 33.7%of that observed in the original base-isolated structure.The proposed platform facilitates the automatic generation of the optimal design scheme for the isolators of asymmetric base-isolated structures,offering valuable insights and guidance for the burgeoning field of intelligent civil engineering design.
基金Supported by National Natural Science Foundation of China(Grant Nos.52222505,52321002)Shanghai Municipal Natural Science Foundation o China(Grant No.23ZR1415500)。
文摘Biological load-bearing materials,like the nacre in shells,have a unique staggered structure that supports their superior mechanical properties.Engineers have been encouraged to imitate it to create load-bearing bio-inspired materials which have excellent properties not present in conventional composites.To create such materials with desirable mechanical properties,the optimum structural parameters combination must be selected.Moreover,the optimal design of bio-inspired composites needs to take into account the trade-offs between various mechanical properties.In this paper,multi-objective optimization models were developed using structural parameters as design variables and mechanical properties as optimization objectives,including stiffness,strength,toughness,and dynamic damping.Using the NSGA-II optimization algorithm,a set of optimal solutions were solved.Additionally,three different structures in natural nacre were introduced in order to utilize the better structure when design bio-inspired materials.The range of optimal solutions that obtained using results from previous research were examined and explained why this collection of optimal solution ranges is better.Also,optimal solutions were compared with the structural features and mechanical properties of real nacre and artificial biomimetic composites to validate our models.Finally,the optimum design strategies can be obtained for nacre-like composites.Our research methodically proposes an optimization method for achieving load-bearing bio-inspired materials with excellent properties and creates a set of optimal solutions from which designers can select the one that best suits their preferences,allowing the fabricated materials to demonstrate preferred performance.
基金funded by Researchers Supporting Programnumber(RSPD2024R809),King Saud University,Riyadh,Saudi Arabia.
文摘Multi-objective optimization is critical for problem-solving in engineering,economics,and AI.This study introduces the Multi-Objective Chef-Based Optimization Algorithm(MOCBOA),an upgraded version of the Chef-Based Optimization Algorithm(CBOA)that addresses distinct objectives.Our approach is unique in systematically examining four dominance relations—Pareto,Epsilon,Cone-epsilon,and Strengthened dominance—to evaluate their influence on sustaining solution variety and driving convergence toward the Pareto front.Our comparison investigation,which was conducted on fifty test problems from the CEC 2021 benchmark and applied to areas such as chemical engineering,mechanical design,and power systems,reveals that the dominance approach used has a considerable impact on the key optimization measures such as the hypervolume metric.This paper provides a solid foundation for determining themost effective dominance approach and significant insights for both theoretical research and practical applications in multi-objective optimization.
基金supported by the National Natural Science Foundation of China(Grant No.50478108).
文摘Due to the growing needs of strengthening steel tubular truss,a new method for enhancing tubular joints by partially filling the chord with grout is proposed.However,the strengthening design of a whole truss is a challenging task,mainly because of multiple design objectives and various fabrication uncertainties.Current practice based on empirical or simple rule-based strategies is not able to handle the task.To address this challenge,a design framework for tubular truss strengthening is developed.The proposed framework can reduce the maximum deflection,improve the load capacities of the truss,and minimize the usage of grout.Furthermore,it considers geometric and modeling uncertainties through Monte Carlo simulation and predict intervals,thereby preventing over-idealization during practical optimization.To demonstrate the proposed design framework,a comparative structural analysis was conducted on a typical Warren truss between pre-and post-optimal strengthen.The results show that,by building upon the Machine Learning models,the proposed framework can produce an effective strengthening scheme.After considering uncertainties in optimization,some idealized samples are filtered out,resulting in a more practical strengthening scheme.The proposed framework is versatile and can be applied to other similar optimal strengthening designs with minimal additional effort.
基金National Science Fund for Distinguished Young Scholars (10425208)Programme of Introducing Talents of Discipline to Universities (B07009)
文摘For dealing with the multi-objective optimization problems of parametric design for aircraft, a novel hybrid parallel multi-objective tabu search （HPMOTS） algorithm is used. First, a new multi-objective tabu search （MOTS） algorithm is proposed. Comparing with the traditional MOTS algorithm, this proposed algorithm adds some new methods such as the combination of MOTS algorithm and ＂Pareto solution＂, the strategy of ＂searching from many directions＂ and the reservation of good solutions. Second, this article also proposes the improved parallel multi-objective tabu search （PMOTS） algorithm. Finally, a new hybrid algorithm--HPMOTS algorithm which combines the PMOTS algorithm with the non-dominated sorting-based multi-objective genetic algorithm （NSGA） is presented. The computing results of these algorithms are compared with each other and it is shown that the optimal result can be obtained by the HPMOTS algorithm and the computing result of the PMOTS algorithm is better than that of MOTS algorithm.
基金The authors are grateful for the financial supports from the Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration(Nos.2019D12 and 2019D11)Open Foundation of State Key Laboratory of Disaster Reduction in Civil Engineering,Tongji University in China(No.SLDRCE19-01)+3 种基金Foundation of Public Welfare Technology Research Project of Zhejiang Province in China(No.LGF20E080013)Natural Science Foundation of Zhejiang Province,China(No.LY22E080003)Fundamental Research Fund for the Provincial Universities of Zhejiang(No.SJLZ2022003)Foundation of Public Welfare Technology Research Project of Ningbo in China,(Nos.2022S170,2022S179).
文摘Over the past several decades,a variety of technical ways have been developed in seismic retrofitting of existing reinforced concrete frames(RFs).Among them,pin-supported rocking walls(PWs)have received much attentions to researchers recently.However,it is still a challenge that how to determine the stiffness demand of PWs and assign the value of the drift concentration factor(DCF)for entire systems rationally and efficiently.In this paper,a design method has been exploited for seismic retrofitting of existing RFs using PWs(RF-PWs)via a multi-objective evolutionary algorithm.Then,the method has been investigated and verified through a practical project.Finally,a parametric analysis was executed to exhibit the strengths and working mechanism of the multi-objective design method.To sum up,the findings of this investigation show that the method furnished in this paper is feasible,functional and can provide adequate information for determining the stiffness demand and the value of the DCFfor PWs.Furthermore,it can be applied for the preliminary design of these kinds of structures.
文摘Multi-objective optimization for the optimum shape design is introduced in aerodynamics using the Game theory. Based on the control theory, the employed optimizer and the negative feedback are used to implement the constraints. All the constraints are satisfied implicitly and automatically in the design. Furthermore,the above methodology is combined with a formulation derived from the Game theory to treat multi-point airfoil optimization. Airfoil shapes are optimized according to various aerodynamics criteria. In the symmetric Nash game, each “player” is responsible for one criterion, and the Nash equilibrium provides a solution to the multipoint optimization. Design results confirm the efficiency of the method.
