Graphite-silicon species(Gr-Si)hybrid anodes have merged as potential candidates for high-energy lithium-ion batteries(LIBs),yet long been plagued by rapid capacity fading due to their unstable mechano-electrochemistr...Graphite-silicon species(Gr-Si)hybrid anodes have merged as potential candidates for high-energy lithium-ion batteries(LIBs),yet long been plagued by rapid capacity fading due to their unstable mechano-electrochemistry.The dominant approach to enhance electrochemical stability of the Gr-Si hybrid anodes typically involves the optimization of the electrode material structures and the employment of low active Si species content in electrode(<10 wt%in most instances).However,the electrode structure design,a factor of equal importance in determining the electrochemical performance of Gr-Si hybrid anodes,has received scant attention.In this study,three Gr-Si hybrid anodes with the identical material composition but distinct electrode structures are designed to investigate the mechanoelectrochemistry of the electrodes.It is revealed that the substantial volume change of Si species particles in Gr-Si hybrid anodes led to the local lattice stress of Gr at their contact interface during the charge/discharge processes,thereby increasing thermodynamic and kinetic barrier of Li-ion migration.Furthermore,the huge disparity in volume change of Si species and Gr particles trigger the separate agglomeration of these two materials,resulting in a considerable electrode volume change and increased electrochemical resistance.An advanced Gr/Si hybrid anode with upper Gr and lower Si species layer structure design addresses the above challenges using photovoltaic waste silicon sources under high Si species content(17 wt%)and areal capacity(2.0 mA h cm^(-2))in Ah-level full pouch cells with a low negative/positive(N/P)ratio of 1.09.The cell shows stable cycling for 100 cycles at 0.3 C with an impressively low capacity decay rate of 0.0546%per cycle,outperforming most reported Gr-Si hybrid anodes.展开更多
Transition metal carbonates(TMCs)hold great potential as high-performance electrodes for alkali metal-ion batteries,owing to multiple-ion storage mechanisms involving conversion process and electrocatalytic reaction.H...Transition metal carbonates(TMCs)hold great potential as high-performance electrodes for alkali metal-ion batteries,owing to multiple-ion storage mechanisms involving conversion process and electrocatalytic reaction.However,they still suffer from inferior electronic conductivity and volume variation during delithiation/lithiation.Heterostructure and heteroatoms doping offer immense promise in enhancing reaction kinetics and structural integrity,which unfortunately have not been achieved in TMCs.Herein,a unique TMCs heterostructure with Ni-doped MnCO_(3)as“core”and Mn-doped NiCO_(3)as“shell”,which is wrapped by graphene(NM@MN/RGO),is achieved by cations differentiation strategy.The formation process for core-shell NM@MN consists of epitaxial growth of NiCO_(3)from MnCO_(3)and synchronously mutual doping,owing to the similar crystal structures but different solubility product constant/formation energy of MnCO_(3)and NiCO_(3).In-situ electrochemical impedance spectroscopy,galvanostatic intermittent titration technique,differential capacity versus voltage plots,theoretical calculation and kinetic analysis reveal the superior electrochemical activity of the NM@MN/RGO to MnCO_(3)/RGO.The NM@MN/RGO shows excellent lithium storage properties(1013.4 mAh·g^(-1)at 0.1 A·g^(-1)and 760 mAh·g^(-1)after 1000 cycles at 2 A·g^(-1))and potassium storage properties(capacity decay rate of 0.114 mAh·g^(-1)per cycle).This work proposes an efficient cation differentiation strategy for constructing advanced TMC electrodes.展开更多
Improving the volumetric energy density of supercapacitors is essential for practical applications,which highly relies on the dense storage of ions in carbon-based electrodes.The functional units of carbon-based elect...Improving the volumetric energy density of supercapacitors is essential for practical applications,which highly relies on the dense storage of ions in carbon-based electrodes.The functional units of carbon-based electrode exhibit multi-scale structural characteristics including macroscopic electrode morphologies,mesoscopic microcrystals and pores,and microscopic defects and dopants in the carbon basal plane.Therefore,the ordered combination of multi-scale structures of carbon electrode is crucial for achieving dense energy storage and high volumetric performance by leveraging the functions of various scale structu re.Considering that previous reviews have focused more on the discussion of specific scale structu re of carbon electrodes,this review takes a multi-scale perspective in which recent progresses regarding the structureperformance relationship,underlying mechanism and directional design of carbon-based multi-scale structures including carbon morphology,pore structure,carbon basal plane micro-environment and electrode technology on dense energy storage and volumetric property of supercapacitors are systematically discussed.We analyzed in detail the effects of the morphology,pore,and micro-environment of carbon electrode materials on ion dense storage,summarized the specific effects of different scale structures on volumetric property and recent research progress,and proposed the mutual influence and trade-off relationship between various scale structures.In addition,the challenges and outlooks for improving the dense storage and volumetric performance of carbon-based supercapacitors are analyzed,which can provide feasible technical reference and guidance for the design and manufacture of dense carbon-based electrode materials.展开更多
In order to ameliorate the electrochemical hydrogen storage performance of La-Mg-Ni system A2B7-type electrode alloys, a small amount of Si was added. The La0.8Mg0.2Ni3.3Co0.2Six （x=0-0.2） electrode alloys were prep...In order to ameliorate the electrochemical hydrogen storage performance of La-Mg-Ni system A2B7-type electrode alloys, a small amount of Si was added. The La0.8Mg0.2Ni3.3Co0.2Six （x=0-0.2） electrode alloys were prepared by casting and annealing. The effects of adding Si on the structure and electrochemical hydrogen storage characteristics of the alloys were investigated systematically. The results indicate that the as-cast and annealed alloys hold multiple structures, involving two major phases of （La, Mg）2Ni7 with a Ce2Ni7-type hexagonal structure and LaNi5 with a CaCu5-type hexagonal structure as well as one residual phase LaNi3. The addition of Si results in a decrease in （La, Mg）2Ni7 phase and an increase in LaNi5 phase without changing the phase structure of the alloys. What is more, it brings on an obvious effect on electrochemical hydrogen storage characteristics of the alloys. The discharge capacities of the as-cast and annealed alloys decline with the increase of Si content, but their cycle stabilities clearly grow under the same condition. Furthermore, the measurements of the high rate discharge ability, the limiting current density, hydrogen diffusion coefficient as well as electrochemical impedance spectra all indicate that the electrochemical kinetic properties of the electrode alloys first increase and then decrease with the rising of Si content.展开更多
In this work,the synthesis of uniform zeolitic imidazolate framework-coated Mo-glycerate spheres and their subsequent conversion into hierarchical architecture containing bimetallic selenides heterostructures and nitr...In this work,the synthesis of uniform zeolitic imidazolate framework-coated Mo-glycerate spheres and their subsequent conversion into hierarchical architecture containing bimetallic selenides heterostructures and nitrogen-doped carbon shell are reported.Selenization temperature plays a significant role in determining the phases,morphology,and lithium-ion storage performance of the composite.Notably,the optimal electrode demonstrates an ultrahigh reversible capacity of 1298.2 mAh/g after 100 cycles at 0.2 A/g and an outstanding rate capability with the capacity still maintained 505.7 mAh/g after 300 cycles at 1.0 A/g,surpassing the calculated theoretical capacity according to individual component and most of the reported MoSe@C-or ZnSe@C-based anodes.Furthermore,ex-situ X-ray diffraction patterns reveal the combined conversion and alloying reaction mechanisms of the composite.展开更多
Transition metal-based electrocatalysts are a promising alternative to noble metal catalysts for electrochemical upgrading of biomass-derived 5-hydroxymethylfurfural(HMF)into high-value 2,5-furandicarboxylic acid(FDCA...Transition metal-based electrocatalysts are a promising alternative to noble metal catalysts for electrochemical upgrading of biomass-derived 5-hydroxymethylfurfural(HMF)into high-value 2,5-furandicarboxylic acid(FDCA).However,the rational design of efficient electrocatalysts with precisely tailored structure-activity correlations remains a critical challenge.Herein,we report a hierarchically structured self-supporting electrode(Vo-NiCo(OH)_(2)-NF)synthesized through in situ electrochemical reconstruction of NiCo-Prussian blue analogue(NiCo-PBA)precursor,in which oxygen vacancy(Vo)-rich Co-doped Ni(OH)_(2)nanosheet arrays are vertically aligned on nickel foam(NF),creating an interconnected conductive network.When evaluated for the HMF oxidation reaction(HMFOR),Vo-NiCo(OH)_(2)-NF exhibits exceptional electrochemical performance,achieving near-complete HMF conversion(99%),ultrahigh FDCA Faradaic efficiency(97.5%),and remarkable product yield(96.2%)at 1.45 V,outperforming conventional Co-doped Ni(OH)_(2)(NiCo(OH)_(2)-NF)and pristine Ni(OH)_(2)(Ni(OH)_(2)-NF)electrodes.By combining in situ spectroscopic characterization and theoretical calculations,we elucidate that the synergistic effects of Co-doping and oxygen vacancy engineering effectively modulate the electronic structure of Ni active centers,favor the formation of high-valent Ni^(3+)species,and optimize HMF adsorption,thereby improving the HMFOR performance.This work provides valuable mechanistic insights for catalyst design and may inspire the development of advanced transition metal-based electrodes for efficient biomass conversion systems.展开更多
Silicon monoxide(SiO)is highly attractive as an anode material for high-energy lithium-ion batteries(LIBs)due to its significantly higher specific capacity.However,its practical application is hindered by substantial ...Silicon monoxide(SiO)is highly attractive as an anode material for high-energy lithium-ion batteries(LIBs)due to its significantly higher specific capacity.However,its practical application is hindered by substantial volume expansion during cycling,which leads to material pulverization and an unstable solid electrolyte interphase(SEI)layer.Inspired by the natural root fixation in soil,we designed a root-like topological structure binder,cassava starch-citric acid(CS-CA),based on the synergistic action of covalent and hydrogen bonds.The abundant-OH and-COOH groups in CS-CA molecules effectively form hydrogen bonds with the-OH groups on the SiO surface,significantly enhancing the interfacial interaction between CS-CA and SiO.The root-like topological structure of CS-CA with a high tolerance alleviates the mechanical stress generated by the volume changes of SiO.More encouragingly,the hydrogen bond action among CS-CA molecules produces a self-healing effect,which is advantageous for repairing damaged electrodes and preserving their structural integrity.As such,the CS-CA/SiO electrode exhibits exceptional cycling performance(963.1 mA h g^(-1)after 400 cycles at 2 A g^(-1))and rate capability(558.9 mA h g^(-1)at 5 A g^(-1)).This innovative,topologically interconnected,root-inspired binder will greatly advance the practical application of long-lasting micron-sized SiO anodes.展开更多
Retaining satisfactory electrocatalytic performance under high current density plays a crucial role in industrial water splitting but is still limited to the enormous energy loss because of insufficient exposure of ac...Retaining satisfactory electrocatalytic performance under high current density plays a crucial role in industrial water splitting but is still limited to the enormous energy loss because of insufficient exposure of active sites caused by the blocked mass/charge transportation at this condition.Herein,we present a freestanding lamellar nanoporous Ni-Co-Mn alloy electrode(Lnp-NCM)designed by a refined variant of the“dealloying-coarsening-dealloying”protocol for highly efficient bifunctional electrocatalyst,where large porous channels distribute on the surface and small porous channels at the interlayer.With its 3D lamellar architecture regulating,the electrocatalytic properties of the electrodes with different distances between lamellas are compared,and faster energy conversion kinetics is achieved with efficient bubble transport channels and abundant electroactive sites.Note that the optimized sample(Lnp-NCM4)is expected to be a potential bifunctional electrocatalyst with low overpotentials of 258 and 439 mV at high current densities of 1000 and 900 mA·cm^(-2)for hydrogen and oxygen evolution reactions(HER and OER),respectively.During overall water splitting in a two-electrode cell with Lnp-NCM4 as cathode and anode,it only needs an ultralow cell voltage of 1.75 V to produce 100 mA·cm^(-2)with remarkable long-term stability over 50 h.This study on lamellar nanoporous electrode design approaches industrial water splitting requirements and paves a way for developing other catalytic systems.展开更多
The recently reported silicon/graphite(Si/Gr)composite electrode with a layered structure is a promising approach to achieve high capacity and stable cycling of Si-based electrodes in lithium-ion batteries.However,the...The recently reported silicon/graphite(Si/Gr)composite electrode with a layered structure is a promising approach to achieve high capacity and stable cycling of Si-based electrodes in lithium-ion batteries.However,there is still a need to clarify why particular layered structures are effective and why others are ineffective or even detrimental.In this work,an unreported mechanism dominated by the porosity evolution of electrodes is proposed for the degradation behavior of layered Si/Gr electrodes.First,the effect of layering sequence on the overall electrode performance is investigated experimentally,and the results suggest that the cycling performance of the silicon-on-graphite(SG)electrode is much superior to that of the graphite-on-silicon electrode.To explain this phenomenon,a coupled mechanical-electrochemical porous electrode model is developed,in which the porosity is affected by the silicon expansion and the local constraints.The modeling results suggest that the weaker constraint of the silicon layer in the SG electrode leads to a more insignificant decrease in porosity,and consequently,the more stable cycling performance.The findings of this work provide new insights into the structural design of Si-based electrodes.展开更多
Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batterie...Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.展开更多
Antimony(Sb)is recognized as a potential electrode material for sodium-ion batteries(SIBs)due to its huge reserves,affordability,and high theoretical capacity(660 mAh·g^(-1)).However,Sb-based materials experience...Antimony(Sb)is recognized as a potential electrode material for sodium-ion batteries(SIBs)due to its huge reserves,affordability,and high theoretical capacity(660 mAh·g^(-1)).However,Sb-based materials experience significant volume expansion during cycling,leading to comminution of the active substance and limiting their practical use in SIBs.Therefore,the volume expansion issue of Sb-based materials during charging/discharging must be solved to create high-performance SIBs.This paper presents a detailed review of structural engineering of Sb-based electrode materials,focusing on the performance effects of different kinds of structures on advanced performance SIBs.Finally,the future development and the challenges of Sb-based materials are prospected.This paper can provide specific perspectives on the structure construction and optimization of Sb-based anode materials so as to promote the rapid development and practical applications of SIBs.展开更多
The catalyst layers(CLs) electrode is the key component of the membrane electrode assembly(MEA) in proton exchange membrane fuel cells(PEMFCs). Conventional electrodes for PEMFCs are composed of carbon-supported, iono...The catalyst layers(CLs) electrode is the key component of the membrane electrode assembly(MEA) in proton exchange membrane fuel cells(PEMFCs). Conventional electrodes for PEMFCs are composed of carbon-supported, ionomer, and Pt nanoparticles, all immersed together and sprayed with a micron-level thickness of CLs. They have a performance trade-off where increasing the Pt loading leads to higher performance of abundant triple-phase boundary areas but increases the electrode cost. Major challenges must be overcome before realizing its wide commercialization. Literature research revealed that it is impossible to achieve performance and durability targets with only high-performance catalysts, so the controllable design of CLs architecture in MEAs for PEMFCs must now be the top priority to meet industry goals. From this perspective, a 3D ordered electrode circumvents this issue with a support-free architecture and ultrathin thickness while reducing noble metal Pt loadings. Herein, we discuss the motivation in-depth and summarize the necessary CLs structural features for designing ultralow Pt loading electrodes. Critical issues that remain in progress for 3D ordered CLs must be studied and characterized. Furthermore, approaches for 3D ordered CLs architecture electrode development, involving material design, structure optimization, preparation technology, and characterization techniques, are summarized and are expected to be next-generation CLs for PEMFCs. Finally, the review concludes with perspectives on possible research directions of CL architecture to address the significant challenges in the future.展开更多
Optimization of composition and microstructure is important to enhance performance of solid oxide fuel cells （SOFC） and lithium-ion batteries （LIB）. For this, the porous electrode structures of both SOFC and LIB a...Optimization of composition and microstructure is important to enhance performance of solid oxide fuel cells （SOFC） and lithium-ion batteries （LIB）. For this, the porous electrode structures of both SOFC and LIB are modeled as a binary mixture of electronic and ionic conducting particles to estimate effective transport properties. Particle packings of 10000 spherical, binary sized and randomly positioned particles are created numerically and densified considering the different manufacturing processes in SOFC and LIB： the sintering of SOFC electrodes is approximated geometrically, whereas the calendering process and volume change due to intercalation in LIB are modeled physically by a discrete el- ement approach. A combination of a tracking algorithm and a resistor network approach is developed to predict the con- nectivity and effective conductivity for the various densified structures. For SOFC, a systematic study of the influence of morphology on connectivity and conductivity is performed on a large number of assemblies with different compositions and particle size ratios between 1 and 10. In comparison to percolation theory, an enlarged percolation area is found, es- pecially for large size ratios. It is shown that in contrast to former studies the percolation threshold correlates to varying coordination numbers. The effective conductivity shows not only an increase with volume fraction as expected but also with size ratio. For LIB, a general increase of conductivity during the intercalation process was observed in correlation with increasing contact forces. The positive influence of cal- endering on the percolation threshold and the effective conductivity of carbon black is shown. The anisotropy caused by the calendering process does not influence the carbon black phase.展开更多
In this study, electrodeposition and thermal decomposition were alternatively used for the fabrication of a series of novel multilayer-structured SnO_2–Sb–Ce/Ti(SSCT) electrodes, and their physiochemical and electro...In this study, electrodeposition and thermal decomposition were alternatively used for the fabrication of a series of novel multilayer-structured SnO_2–Sb–Ce/Ti(SSCT) electrodes, and their physiochemical and electrochemical properties were investigated for electrochemical oxidation of tetracycline(TC) in aqueous medium.Experimentally, after the SnO_2–Sb–Ce(SSC) composite was electrodeposited for 120 s on the titanium substrate in aqueous solution, the outer thermal coatings composed of SSC were synthesized by a hydrothermal method.Both influences of electrodeposition time(T_(ed)) and thermal decomposition time(Ttd) were investigated to obtain the optimum preparation. It was found that when increasing T_(ed)to a certain extent a longer lifetime of electrode can be achieved, which was attributed to a more solid interlayer structure. A notable SSCTT_(ed),Ttdelectrode,i.e., SSCT3,10, which was prepared through three times of 120 s' electrodeposition(T_(ed)= 3) and ten times of thermal decomposition(Ttd= 10) obtained the highest oxygen evolution potential 3.141 V vs. SCE. In this selected electrode, when 10 mg·L^(-1) initial TC concentration was added to this wastewater, the highest color removal efficiency and mineralization rate of TC were 72.4% and 41.6%, respectively, with an applied electricity density of 20 m A·cm^(-2) and treatment time of 1 h. These results presented here demonstrate that the combined application of electrodeposition and thermal decomposition is effective in realization of enhanced electrocatalytic oxidation activity.展开更多
The interfacial performance of implanted neural electrodes is crucial for stimulation safety and the recording quality of neuronal activity.This paper proposes a novel surface architecture and optimization strategy fo...The interfacial performance of implanted neural electrodes is crucial for stimulation safety and the recording quality of neuronal activity.This paper proposes a novel surface architecture and optimization strategy for the platinum–iridium(Pt–Ir)electrode to optimize electrochemical performance and wettability.A series of surface micro/nano structures were fabricated on Pt–Ir electrodes with different combinations of four adjustable laser-processing parameters.Subsequently,the electrodes were characterized by scanning electron microscopy,energy-dispersive X-ray spectroscopy,cyclic voltammetry,electrochemical impedance spectroscopy,and wetting behavior.The results show that electrode performance strongly depends on the surface morphology.Increasing scanning overlap along with moderate pulse energy and the right number of pulses leads to enriched surface micro/nano structures and improved electrode performance.It raises the maximum charge storage capacity to 128.2 mC/cm^(2) and the interface capacitance of electrodes to 3.0×10^(4)μF/cm^(2) for the geometric area,compared with 4.6 mC/cm^(2) and 443.1μF/cm2,respectively,for the smooth Pt–Ir electrode.The corresponding optimal results for the optically measured area are 111.8 mC/cm^(2) and 2.6×10^(4)μF/cm^(2),which indicate the contribution of fner structures to the ablation profle.The hierarchical structures formed by the femtosecond laser dramatically enhanced the wettability of the electrode interface,giving it superwicking properties.A wicking speed of approximately 80 mm/s was reached.Our optimization strategy,leading to superior performance of the superwicking Pt–Ir interface,is promising for use in new neural electrodes.展开更多
The rapid development and widespread application of lithium-ion batteries(LIBs) have increased demand for high-safety and high-performance LIBs. Accordingly, various additives have been used in commercial liquid elect...The rapid development and widespread application of lithium-ion batteries(LIBs) have increased demand for high-safety and high-performance LIBs. Accordingly, various additives have been used in commercial liquid electrolytes to severally adjust the solvation structure of lithium ions, control the components of solid electrolyte interphase, or reduce flammability. While it is highly desirable to develop low-cost multifunctional electrolyte additives integrally that address both safety and performance on LIBs, significant challenges remain. Herein, a novel phosphorus-containing organic small molecule, bis(2-methoxyethyl) methylphosphonate(BMOP), was rationally designed to serve as a fluorine-free and multifunctional additive in commercial electrolytes. This novel electrolyte additive is low-toxicity,high-efficiency, low-cost, and electrode-compatible, which shows the significant improvement to both electrochemical performance and fire safety for LIBs through regulating the electrolyte solvation structure, constructing the stable electrode-electrolyte interphase, and suppressing the electrolyte combustion. This work provides a new avenue for developing safer and high-performance LIBs.展开更多
For the purpose of improving the electrochemical cycle stability of the La-Mg-Ni based A2BT-type electrode alloys, both reducing Mg content and substituting La with Pr were adopted. The Lao.8-xPrxMg0.2Ni3.15Co0.2A10.1...For the purpose of improving the electrochemical cycle stability of the La-Mg-Ni based A2BT-type electrode alloys, both reducing Mg content and substituting La with Pr were adopted. The Lao.8-xPrxMg0.2Ni3.15Co0.2A10.1Si0.05 （x=0, 0.1, 0.2, 0.3, 0.4） electrode alloys were fabricated by casting and annealing. The investigation on the structures and electrochemical performances of the alloys was performed. The obtained results reveal that the as-cast and annealed alloys comprise two major phases, （La, Mg）2Ni7 phase with the hexagonal Ce2NiT-type structure and LaNi5 phase with the hexagonal CaCus-type structure, as well as a little residual LaNi3 phase. It is also found that the addition of Pr element observably affects the electrochemical hydrogen storage characteristics of the alloys, just as the discharge capacity and high rate discharge ability （HRD） first rise then fall with the growing of Pr content, and among all the alloys, the as-cast and annealed （x=0.3） alloys generate the largest discharge capacities of 360.8 and 386.5 mA.h/g, respectively. Additionally, the electrochemical cycle stability of all the alloys markedly grows with the increase of Pr content. The capacity retaining rate （S100） at the 100th charging and discharging cycle is enhanced from 64.98% to 77.55% for the as-cast alloy, and from 76.60% to 95.72% for the as-annealed alloy by rising Pr content from 0 to 0.4. Furthermore, the substitution of Pr for La results in first increase and then decrease in the hydrogen diffusion coefficient （D）, the limiting current density （IL） as well as the electrochemical impedance.展开更多
Efflcient collection of water from fog can effectively alleviate the problem of water shortages in foggy but water-scarce areas,such as deserts,islands and so on.Unlike inefflcient fog meshes,corona discharge can char...Efflcient collection of water from fog can effectively alleviate the problem of water shortages in foggy but water-scarce areas,such as deserts,islands and so on.Unlike inefflcient fog meshes,corona discharge can charge water droplets and further enhance the water-collecting effect.This study proposes a novel multi-electrode collecting structure that can achieve efflcient and direction-independent water collection from fog.The multi-electrode structure consists of three parts:a charging electrode,an intercepting electrode and a ground electrode.Four types of watercollecting structures are compared experimentally,and the collection rates from a traditional fog mesh,a wire-mesh electrode with fog coming from a high-voltage electrode,a wire-mesh electrode with fog coming from a ground electrode and a multi-electrode structure are 2–3 g h^(-1),100–120 g h^(-1),60–80 g h^(-1)and 200–220 g h^(-1),respectively.The collection rate of the multielectrode structure is 100–150 times that of a traditional fog mesh and 2–4 times that of a wiremesh electrode.These results demonstrate the superiority of the multi-electrode structure in fog collection.In addition,the motion equation of charged droplets in an electric fleld is also derived,and the optimization strategy of electrode spacing is also discussed.This structure can be applied not only to fog collection,but also to air puriflcation,factory waste gas treatment and other flelds.展开更多
In aero-engines,mortise-tenon joint structures are often used to connect the blades to the turbine disk.The disadvantages associated with conventional manufacturing techniques mean that a low-cost,high-efficiency,and ...In aero-engines,mortise-tenon joint structures are often used to connect the blades to the turbine disk.The disadvantages associated with conventional manufacturing techniques mean that a low-cost,high-efficiency,and high-quality nickel-based mortise–tenon joint structure is an urgent requirement in the field of aviation engineering.Electrochemical cutting is a potential machining method for manufacturing these parts,as there is no tool degradation in the cutting process and high-quality surfaces can be obtained.To realize the electrochemical cutting of a mortise-tenon joint structure,a method using a tube electrode with helically distributed jet-flow holes on the side-wall is proposed.During feeding,the tube electrode rotates along its central axis.Flow field simulations show that the rotational speed of the tube electrode determines the direct spraying time of the high-speed electrolyte ejected from the jet-flow holes to the machining area,while the electrolyte pressure determines the flow rate of the electrolyte and the velocity of the electrolyte ejected from the jet-flow holes.The machining results using the proposed method are verified experimentally,and the machining parameters are optimized.Finally,mortise and tenon samples are successfully machined using 20 mm thick Inconel 718 alloy with a feeding rate of 5μm/s.展开更多
The La-Mg-Ni system PuNi3-type La0.5Ce0.2Mg0.3Co0.4Ni2.6-xMnx(x=0,0.1,0.2,0.3,0.4) hydrogen storage alloys were prepared by casting and rapid quenching. The effects of the rapid quenching on the structure and electroc...The La-Mg-Ni system PuNi3-type La0.5Ce0.2Mg0.3Co0.4Ni2.6-xMnx(x=0,0.1,0.2,0.3,0.4) hydrogen storage alloys were prepared by casting and rapid quenching. The effects of the rapid quenching on the structure and electrochemical characteristics of the alloys were studied. The results obtained by XRD,SEM and TEM indicate that the as-cast and quenched alloys mainly consist of two major phases,(La,Mg)Ni3 and LaNi5,as well as a residual phase LaNi. The rapid quenching does not exert an obvious influence on the phase composition of the alloys,but it leads to an increase of the LaNi5 phase and a decrease of the(La,Mg)Ni3 phase. The as-quenched alloys have a nano-crystalline structure,and the grain sizes of the alloys are in the range of 20-30 nm. The results by the electrochemical measurements indicate that both the discharge capacity and the high rate discharge(HRD) ability of the alloy first increase and then decrease with the variety of quenching rate and obtain the maximum values at the special quenching rate which is changeable with the variety of Mn content. The rapid quenching significantly improves the cycle stabilities of the alloys,but it slightly impairs the activation capabilities of the alloys.展开更多
基金the financial support by the National Natural Science Foundation of China(52072137)the National Natural Science Foundation of China(22205068)the"CUG Scholar"Scientific Research Funds at China University of Geosciences(Wuhan)(2022118)。
文摘Graphite-silicon species(Gr-Si)hybrid anodes have merged as potential candidates for high-energy lithium-ion batteries(LIBs),yet long been plagued by rapid capacity fading due to their unstable mechano-electrochemistry.The dominant approach to enhance electrochemical stability of the Gr-Si hybrid anodes typically involves the optimization of the electrode material structures and the employment of low active Si species content in electrode(<10 wt%in most instances).However,the electrode structure design,a factor of equal importance in determining the electrochemical performance of Gr-Si hybrid anodes,has received scant attention.In this study,three Gr-Si hybrid anodes with the identical material composition but distinct electrode structures are designed to investigate the mechanoelectrochemistry of the electrodes.It is revealed that the substantial volume change of Si species particles in Gr-Si hybrid anodes led to the local lattice stress of Gr at their contact interface during the charge/discharge processes,thereby increasing thermodynamic and kinetic barrier of Li-ion migration.Furthermore,the huge disparity in volume change of Si species and Gr particles trigger the separate agglomeration of these two materials,resulting in a considerable electrode volume change and increased electrochemical resistance.An advanced Gr/Si hybrid anode with upper Gr and lower Si species layer structure design addresses the above challenges using photovoltaic waste silicon sources under high Si species content(17 wt%)and areal capacity(2.0 mA h cm^(-2))in Ah-level full pouch cells with a low negative/positive(N/P)ratio of 1.09.The cell shows stable cycling for 100 cycles at 0.3 C with an impressively low capacity decay rate of 0.0546%per cycle,outperforming most reported Gr-Si hybrid anodes.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.52202371 and 51902102)the Natural Science Foundation of Shandong Province(Nos.ZR202211230173,ZR2020QE066 and ZR2021QE200)+2 种基金the Opening Project of State Key Laboratory of Advanced Technology for Float Glass(No.2020KF08)the SDUT&Zibo City Integration Development Project(No.2021SNPT0045)the fellowship of China Postdoctoral Science Foundation(No.2020M672081).
文摘Transition metal carbonates(TMCs)hold great potential as high-performance electrodes for alkali metal-ion batteries,owing to multiple-ion storage mechanisms involving conversion process and electrocatalytic reaction.However,they still suffer from inferior electronic conductivity and volume variation during delithiation/lithiation.Heterostructure and heteroatoms doping offer immense promise in enhancing reaction kinetics and structural integrity,which unfortunately have not been achieved in TMCs.Herein,a unique TMCs heterostructure with Ni-doped MnCO_(3)as“core”and Mn-doped NiCO_(3)as“shell”,which is wrapped by graphene(NM@MN/RGO),is achieved by cations differentiation strategy.The formation process for core-shell NM@MN consists of epitaxial growth of NiCO_(3)from MnCO_(3)and synchronously mutual doping,owing to the similar crystal structures but different solubility product constant/formation energy of MnCO_(3)and NiCO_(3).In-situ electrochemical impedance spectroscopy,galvanostatic intermittent titration technique,differential capacity versus voltage plots,theoretical calculation and kinetic analysis reveal the superior electrochemical activity of the NM@MN/RGO to MnCO_(3)/RGO.The NM@MN/RGO shows excellent lithium storage properties(1013.4 mAh·g^(-1)at 0.1 A·g^(-1)and 760 mAh·g^(-1)after 1000 cycles at 2 A·g^(-1))and potassium storage properties(capacity decay rate of 0.114 mAh·g^(-1)per cycle).This work proposes an efficient cation differentiation strategy for constructing advanced TMC electrodes.
基金funded by the Joint Fund for Regional Innovation and Development of National Natural Science Foundation of China(U21A20143)the National Science Fund for Excellent Young Scholars(52322607)the Excellent Youth Foundation of Heilongjiang Scientific Committee(YQ2022E028)。
文摘Improving the volumetric energy density of supercapacitors is essential for practical applications,which highly relies on the dense storage of ions in carbon-based electrodes.The functional units of carbon-based electrode exhibit multi-scale structural characteristics including macroscopic electrode morphologies,mesoscopic microcrystals and pores,and microscopic defects and dopants in the carbon basal plane.Therefore,the ordered combination of multi-scale structures of carbon electrode is crucial for achieving dense energy storage and high volumetric performance by leveraging the functions of various scale structu re.Considering that previous reviews have focused more on the discussion of specific scale structu re of carbon electrodes,this review takes a multi-scale perspective in which recent progresses regarding the structureperformance relationship,underlying mechanism and directional design of carbon-based multi-scale structures including carbon morphology,pore structure,carbon basal plane micro-environment and electrode technology on dense energy storage and volumetric property of supercapacitors are systematically discussed.We analyzed in detail the effects of the morphology,pore,and micro-environment of carbon electrode materials on ion dense storage,summarized the specific effects of different scale structures on volumetric property and recent research progress,and proposed the mutual influence and trade-off relationship between various scale structures.In addition,the challenges and outlooks for improving the dense storage and volumetric performance of carbon-based supercapacitors are analyzed,which can provide feasible technical reference and guidance for the design and manufacture of dense carbon-based electrode materials.
基金Projects(50961009,51161015)supported by the National Natural Science Foundation of ChinaProject(2011AA03A408)supported by the High-tech Research and Development Program of ChinaProjects(2011ZD10,2010ZD05)supported by the Natural Science Foundation of Inner Mongolia,China
文摘In order to ameliorate the electrochemical hydrogen storage performance of La-Mg-Ni system A2B7-type electrode alloys, a small amount of Si was added. The La0.8Mg0.2Ni3.3Co0.2Six （x=0-0.2） electrode alloys were prepared by casting and annealing. The effects of adding Si on the structure and electrochemical hydrogen storage characteristics of the alloys were investigated systematically. The results indicate that the as-cast and annealed alloys hold multiple structures, involving two major phases of （La, Mg）2Ni7 with a Ce2Ni7-type hexagonal structure and LaNi5 with a CaCu5-type hexagonal structure as well as one residual phase LaNi3. The addition of Si results in a decrease in （La, Mg）2Ni7 phase and an increase in LaNi5 phase without changing the phase structure of the alloys. What is more, it brings on an obvious effect on electrochemical hydrogen storage characteristics of the alloys. The discharge capacities of the as-cast and annealed alloys decline with the increase of Si content, but their cycle stabilities clearly grow under the same condition. Furthermore, the measurements of the high rate discharge ability, the limiting current density, hydrogen diffusion coefficient as well as electrochemical impedance spectra all indicate that the electrochemical kinetic properties of the electrode alloys first increase and then decrease with the rising of Si content.
基金supported by the National Natural Science Foundation of China(No.22265017)the Open Fund of Key Laboratory of Eco-functional Polymer Materials of the Ministry of Education(No.KF-21-04).
文摘In this work,the synthesis of uniform zeolitic imidazolate framework-coated Mo-glycerate spheres and their subsequent conversion into hierarchical architecture containing bimetallic selenides heterostructures and nitrogen-doped carbon shell are reported.Selenization temperature plays a significant role in determining the phases,morphology,and lithium-ion storage performance of the composite.Notably,the optimal electrode demonstrates an ultrahigh reversible capacity of 1298.2 mAh/g after 100 cycles at 0.2 A/g and an outstanding rate capability with the capacity still maintained 505.7 mAh/g after 300 cycles at 1.0 A/g,surpassing the calculated theoretical capacity according to individual component and most of the reported MoSe@C-or ZnSe@C-based anodes.Furthermore,ex-situ X-ray diffraction patterns reveal the combined conversion and alloying reaction mechanisms of the composite.
基金financial support of the National Natural Science Foundation of China(NSFC)(22372039 and 22305247)the Natural Science Foundation of Fujian Province of China(2021J06010)the Fuzhou University Testing Fund of Precious Apparatus(2025T022)。
文摘Transition metal-based electrocatalysts are a promising alternative to noble metal catalysts for electrochemical upgrading of biomass-derived 5-hydroxymethylfurfural(HMF)into high-value 2,5-furandicarboxylic acid(FDCA).However,the rational design of efficient electrocatalysts with precisely tailored structure-activity correlations remains a critical challenge.Herein,we report a hierarchically structured self-supporting electrode(Vo-NiCo(OH)_(2)-NF)synthesized through in situ electrochemical reconstruction of NiCo-Prussian blue analogue(NiCo-PBA)precursor,in which oxygen vacancy(Vo)-rich Co-doped Ni(OH)_(2)nanosheet arrays are vertically aligned on nickel foam(NF),creating an interconnected conductive network.When evaluated for the HMF oxidation reaction(HMFOR),Vo-NiCo(OH)_(2)-NF exhibits exceptional electrochemical performance,achieving near-complete HMF conversion(99%),ultrahigh FDCA Faradaic efficiency(97.5%),and remarkable product yield(96.2%)at 1.45 V,outperforming conventional Co-doped Ni(OH)_(2)(NiCo(OH)_(2)-NF)and pristine Ni(OH)_(2)(Ni(OH)_(2)-NF)electrodes.By combining in situ spectroscopic characterization and theoretical calculations,we elucidate that the synergistic effects of Co-doping and oxygen vacancy engineering effectively modulate the electronic structure of Ni active centers,favor the formation of high-valent Ni^(3+)species,and optimize HMF adsorption,thereby improving the HMFOR performance.This work provides valuable mechanistic insights for catalyst design and may inspire the development of advanced transition metal-based electrodes for efficient biomass conversion systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.22378342,92372101,52162036,and 21875155)the Fundamental Research Funds for the Central Universities(20720220010)+3 种基金the National Key Research and Development Program of China(2021YFA1201502)the Natural Science Foundation of Sichuan Province(Grant No.2024NSFSC1160)the Postdoctoral Fellowship Program of CPSF(Grant No.GZB20230608)support of Nanqiang Young Top-notch Talent Fellowship in Xiamen University。
文摘Silicon monoxide(SiO)is highly attractive as an anode material for high-energy lithium-ion batteries(LIBs)due to its significantly higher specific capacity.However,its practical application is hindered by substantial volume expansion during cycling,which leads to material pulverization and an unstable solid electrolyte interphase(SEI)layer.Inspired by the natural root fixation in soil,we designed a root-like topological structure binder,cassava starch-citric acid(CS-CA),based on the synergistic action of covalent and hydrogen bonds.The abundant-OH and-COOH groups in CS-CA molecules effectively form hydrogen bonds with the-OH groups on the SiO surface,significantly enhancing the interfacial interaction between CS-CA and SiO.The root-like topological structure of CS-CA with a high tolerance alleviates the mechanical stress generated by the volume changes of SiO.More encouragingly,the hydrogen bond action among CS-CA molecules produces a self-healing effect,which is advantageous for repairing damaged electrodes and preserving their structural integrity.As such,the CS-CA/SiO electrode exhibits exceptional cycling performance(963.1 mA h g^(-1)after 400 cycles at 2 A g^(-1))and rate capability(558.9 mA h g^(-1)at 5 A g^(-1)).This innovative,topologically interconnected,root-inspired binder will greatly advance the practical application of long-lasting micron-sized SiO anodes.
基金supported by the National Natural Science Foundation of China(No.52101251)the Science Research Project of Hebei Education Department(No.BJK2023058)the Natural Science Foundation of Hebei Province(Nos.E2020208069 and B2020208083).
文摘Retaining satisfactory electrocatalytic performance under high current density plays a crucial role in industrial water splitting but is still limited to the enormous energy loss because of insufficient exposure of active sites caused by the blocked mass/charge transportation at this condition.Herein,we present a freestanding lamellar nanoporous Ni-Co-Mn alloy electrode(Lnp-NCM)designed by a refined variant of the“dealloying-coarsening-dealloying”protocol for highly efficient bifunctional electrocatalyst,where large porous channels distribute on the surface and small porous channels at the interlayer.With its 3D lamellar architecture regulating,the electrocatalytic properties of the electrodes with different distances between lamellas are compared,and faster energy conversion kinetics is achieved with efficient bubble transport channels and abundant electroactive sites.Note that the optimized sample(Lnp-NCM4)is expected to be a potential bifunctional electrocatalyst with low overpotentials of 258 and 439 mV at high current densities of 1000 and 900 mA·cm^(-2)for hydrogen and oxygen evolution reactions(HER and OER),respectively.During overall water splitting in a two-electrode cell with Lnp-NCM4 as cathode and anode,it only needs an ultralow cell voltage of 1.75 V to produce 100 mA·cm^(-2)with remarkable long-term stability over 50 h.This study on lamellar nanoporous electrode design approaches industrial water splitting requirements and paves a way for developing other catalytic systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.12072183,12472174,and 12421002).
文摘The recently reported silicon/graphite(Si/Gr)composite electrode with a layered structure is a promising approach to achieve high capacity and stable cycling of Si-based electrodes in lithium-ion batteries.However,there is still a need to clarify why particular layered structures are effective and why others are ineffective or even detrimental.In this work,an unreported mechanism dominated by the porosity evolution of electrodes is proposed for the degradation behavior of layered Si/Gr electrodes.First,the effect of layering sequence on the overall electrode performance is investigated experimentally,and the results suggest that the cycling performance of the silicon-on-graphite(SG)electrode is much superior to that of the graphite-on-silicon electrode.To explain this phenomenon,a coupled mechanical-electrochemical porous electrode model is developed,in which the porosity is affected by the silicon expansion and the local constraints.The modeling results suggest that the weaker constraint of the silicon layer in the SG electrode leads to a more insignificant decrease in porosity,and consequently,the more stable cycling performance.The findings of this work provide new insights into the structural design of Si-based electrodes.
基金National Key R&D Program of China,Grant/Award Number:2023YFB2503900National Natural Science Foundation of China,Grant/Award Number:12172143Shenzhen Science and Technology Program,Grant/Award Numbers:JCYJ20220818100418040,JCYJ20220530160816038。
文摘Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.
基金financially supported by Zhejiang Province Postdoctoral Research Project(No.ZJ 2023146)the Municipal Key R&D Program of Ningbo(No.2023Z064)。
文摘Antimony(Sb)is recognized as a potential electrode material for sodium-ion batteries(SIBs)due to its huge reserves,affordability,and high theoretical capacity(660 mAh·g^(-1)).However,Sb-based materials experience significant volume expansion during cycling,leading to comminution of the active substance and limiting their practical use in SIBs.Therefore,the volume expansion issue of Sb-based materials during charging/discharging must be solved to create high-performance SIBs.This paper presents a detailed review of structural engineering of Sb-based electrode materials,focusing on the performance effects of different kinds of structures on advanced performance SIBs.Finally,the future development and the challenges of Sb-based materials are prospected.This paper can provide specific perspectives on the structure construction and optimization of Sb-based anode materials so as to promote the rapid development and practical applications of SIBs.
基金funded by the Natural Science Foundation of Shandong Province, China (ZR2023MB049)the China Postdoctoral Science Foundation (2020M670483)the Science Foundation of Weifang University (2023BS11)。
文摘The catalyst layers(CLs) electrode is the key component of the membrane electrode assembly(MEA) in proton exchange membrane fuel cells(PEMFCs). Conventional electrodes for PEMFCs are composed of carbon-supported, ionomer, and Pt nanoparticles, all immersed together and sprayed with a micron-level thickness of CLs. They have a performance trade-off where increasing the Pt loading leads to higher performance of abundant triple-phase boundary areas but increases the electrode cost. Major challenges must be overcome before realizing its wide commercialization. Literature research revealed that it is impossible to achieve performance and durability targets with only high-performance catalysts, so the controllable design of CLs architecture in MEAs for PEMFCs must now be the top priority to meet industry goals. From this perspective, a 3D ordered electrode circumvents this issue with a support-free architecture and ultrathin thickness while reducing noble metal Pt loadings. Herein, we discuss the motivation in-depth and summarize the necessary CLs structural features for designing ultralow Pt loading electrodes. Critical issues that remain in progress for 3D ordered CLs must be studied and characterized. Furthermore, approaches for 3D ordered CLs architecture electrode development, involving material design, structure optimization, preparation technology, and characterization techniques, are summarized and are expected to be next-generation CLs for PEMFCs. Finally, the review concludes with perspectives on possible research directions of CL architecture to address the significant challenges in the future.
基金supported by the Helmholtz Portfolio "elektrochemische Speicher",particularly the work related to lithium-ion batteriespartially supported as part of the HeteroFoam Center,an Energy Frontier Research Center funded by the U.S.Department of Energy,Office of Science, Basic Energy Sciences(DE-SC0001061)+1 种基金support from the Center for Scientific Computing at the CNSI and MRL:an NSF MRSEC(DMR-1121053) and NSF (CNS-0960316)Australian Research Council Grant DE130101639
文摘Optimization of composition and microstructure is important to enhance performance of solid oxide fuel cells （SOFC） and lithium-ion batteries （LIB）. For this, the porous electrode structures of both SOFC and LIB are modeled as a binary mixture of electronic and ionic conducting particles to estimate effective transport properties. Particle packings of 10000 spherical, binary sized and randomly positioned particles are created numerically and densified considering the different manufacturing processes in SOFC and LIB： the sintering of SOFC electrodes is approximated geometrically, whereas the calendering process and volume change due to intercalation in LIB are modeled physically by a discrete el- ement approach. A combination of a tracking algorithm and a resistor network approach is developed to predict the con- nectivity and effective conductivity for the various densified structures. For SOFC, a systematic study of the influence of morphology on connectivity and conductivity is performed on a large number of assemblies with different compositions and particle size ratios between 1 and 10. In comparison to percolation theory, an enlarged percolation area is found, es- pecially for large size ratios. It is shown that in contrast to former studies the percolation threshold correlates to varying coordination numbers. The effective conductivity shows not only an increase with volume fraction as expected but also with size ratio. For LIB, a general increase of conductivity during the intercalation process was observed in correlation with increasing contact forces. The positive influence of cal- endering on the percolation threshold and the effective conductivity of carbon black is shown. The anisotropy caused by the calendering process does not influence the carbon black phase.
基金Supported by the National Natural Science Foundation of China(U1510120)the International Academic Cooperation and Exchange Program of Shanghai Science and Technology Committee(14520721900)
文摘In this study, electrodeposition and thermal decomposition were alternatively used for the fabrication of a series of novel multilayer-structured SnO_2–Sb–Ce/Ti(SSCT) electrodes, and their physiochemical and electrochemical properties were investigated for electrochemical oxidation of tetracycline(TC) in aqueous medium.Experimentally, after the SnO_2–Sb–Ce(SSC) composite was electrodeposited for 120 s on the titanium substrate in aqueous solution, the outer thermal coatings composed of SSC were synthesized by a hydrothermal method.Both influences of electrodeposition time(T_(ed)) and thermal decomposition time(Ttd) were investigated to obtain the optimum preparation. It was found that when increasing T_(ed)to a certain extent a longer lifetime of electrode can be achieved, which was attributed to a more solid interlayer structure. A notable SSCTT_(ed),Ttdelectrode,i.e., SSCT3,10, which was prepared through three times of 120 s' electrodeposition(T_(ed)= 3) and ten times of thermal decomposition(Ttd= 10) obtained the highest oxygen evolution potential 3.141 V vs. SCE. In this selected electrode, when 10 mg·L^(-1) initial TC concentration was added to this wastewater, the highest color removal efficiency and mineralization rate of TC were 72.4% and 41.6%, respectively, with an applied electricity density of 20 m A·cm^(-2) and treatment time of 1 h. These results presented here demonstrate that the combined application of electrodeposition and thermal decomposition is effective in realization of enhanced electrocatalytic oxidation activity.
基金the National Natural Science Foundation of China(Nos.51777115 and 81527901)the National Key Research and Development Program of China(Nos.2016YFC0105502 and 2016YFC0105900)Tsinghua University Intiative Scientifc Research Program and Major Achievements Transformation Project of Beijing’s College.
文摘The interfacial performance of implanted neural electrodes is crucial for stimulation safety and the recording quality of neuronal activity.This paper proposes a novel surface architecture and optimization strategy for the platinum–iridium(Pt–Ir)electrode to optimize electrochemical performance and wettability.A series of surface micro/nano structures were fabricated on Pt–Ir electrodes with different combinations of four adjustable laser-processing parameters.Subsequently,the electrodes were characterized by scanning electron microscopy,energy-dispersive X-ray spectroscopy,cyclic voltammetry,electrochemical impedance spectroscopy,and wetting behavior.The results show that electrode performance strongly depends on the surface morphology.Increasing scanning overlap along with moderate pulse energy and the right number of pulses leads to enriched surface micro/nano structures and improved electrode performance.It raises the maximum charge storage capacity to 128.2 mC/cm^(2) and the interface capacitance of electrodes to 3.0×10^(4)μF/cm^(2) for the geometric area,compared with 4.6 mC/cm^(2) and 443.1μF/cm2,respectively,for the smooth Pt–Ir electrode.The corresponding optimal results for the optically measured area are 111.8 mC/cm^(2) and 2.6×10^(4)μF/cm^(2),which indicate the contribution of fner structures to the ablation profle.The hierarchical structures formed by the femtosecond laser dramatically enhanced the wettability of the electrode interface,giving it superwicking properties.A wicking speed of approximately 80 mm/s was reached.Our optimization strategy,leading to superior performance of the superwicking Pt–Ir interface,is promising for use in new neural electrodes.
基金supported by the National Natural Science Foundation of China (51773134)the Sichuan Science and Technology Program (2019YFH0112)+2 种基金the Fundamental Research Funds for the Central UniversitiesInstitutional Research Fund from Sichuan University (2021SCUNL201)the 111 Project (B20001)。
文摘The rapid development and widespread application of lithium-ion batteries(LIBs) have increased demand for high-safety and high-performance LIBs. Accordingly, various additives have been used in commercial liquid electrolytes to severally adjust the solvation structure of lithium ions, control the components of solid electrolyte interphase, or reduce flammability. While it is highly desirable to develop low-cost multifunctional electrolyte additives integrally that address both safety and performance on LIBs, significant challenges remain. Herein, a novel phosphorus-containing organic small molecule, bis(2-methoxyethyl) methylphosphonate(BMOP), was rationally designed to serve as a fluorine-free and multifunctional additive in commercial electrolytes. This novel electrolyte additive is low-toxicity,high-efficiency, low-cost, and electrode-compatible, which shows the significant improvement to both electrochemical performance and fire safety for LIBs through regulating the electrolyte solvation structure, constructing the stable electrode-electrolyte interphase, and suppressing the electrolyte combustion. This work provides a new avenue for developing safer and high-performance LIBs.
基金Projects(51161015,50961009) supported by the National Natural Science Foundation of ChinaProject(2011AA03A408) supported by the National High Technology Research and Development Program of ChinaProjects(2011ZD10,2010ZD05) supported by the Natural Science Foundation of Inner Mongolia,China
文摘For the purpose of improving the electrochemical cycle stability of the La-Mg-Ni based A2BT-type electrode alloys, both reducing Mg content and substituting La with Pr were adopted. The Lao.8-xPrxMg0.2Ni3.15Co0.2A10.1Si0.05 （x=0, 0.1, 0.2, 0.3, 0.4） electrode alloys were fabricated by casting and annealing. The investigation on the structures and electrochemical performances of the alloys was performed. The obtained results reveal that the as-cast and annealed alloys comprise two major phases, （La, Mg）2Ni7 phase with the hexagonal Ce2NiT-type structure and LaNi5 phase with the hexagonal CaCus-type structure, as well as a little residual LaNi3 phase. It is also found that the addition of Pr element observably affects the electrochemical hydrogen storage characteristics of the alloys, just as the discharge capacity and high rate discharge ability （HRD） first rise then fall with the growing of Pr content, and among all the alloys, the as-cast and annealed （x=0.3） alloys generate the largest discharge capacities of 360.8 and 386.5 mA.h/g, respectively. Additionally, the electrochemical cycle stability of all the alloys markedly grows with the increase of Pr content. The capacity retaining rate （S100） at the 100th charging and discharging cycle is enhanced from 64.98% to 77.55% for the as-cast alloy, and from 76.60% to 95.72% for the as-annealed alloy by rising Pr content from 0 to 0.4. Furthermore, the substitution of Pr for La results in first increase and then decrease in the hydrogen diffusion coefficient （D）, the limiting current density （IL） as well as the electrochemical impedance.
基金supported by the National Key Research and Development Program of China(Nos.2016YFC0401002 and 2016YFC0401006)National Natural Science Foundation of China(Nos.51577080 and 51821005)。
文摘Efflcient collection of water from fog can effectively alleviate the problem of water shortages in foggy but water-scarce areas,such as deserts,islands and so on.Unlike inefflcient fog meshes,corona discharge can charge water droplets and further enhance the water-collecting effect.This study proposes a novel multi-electrode collecting structure that can achieve efflcient and direction-independent water collection from fog.The multi-electrode structure consists of three parts:a charging electrode,an intercepting electrode and a ground electrode.Four types of watercollecting structures are compared experimentally,and the collection rates from a traditional fog mesh,a wire-mesh electrode with fog coming from a high-voltage electrode,a wire-mesh electrode with fog coming from a ground electrode and a multi-electrode structure are 2–3 g h^(-1),100–120 g h^(-1),60–80 g h^(-1)and 200–220 g h^(-1),respectively.The collection rate of the multielectrode structure is 100–150 times that of a traditional fog mesh and 2–4 times that of a wiremesh electrode.These results demonstrate the superiority of the multi-electrode structure in fog collection.In addition,the motion equation of charged droplets in an electric fleld is also derived,and the optimization strategy of electrode spacing is also discussed.This structure can be applied not only to fog collection,but also to air puriflcation,factory waste gas treatment and other flelds.
基金supported by the National Natural Science Foundation of China(No.91960204)the Natural Science Foundation of Jiangsu Province(No.BK20191279)+1 种基金the Aeronautical Science Foundation of China(No.201907052002)the National Natural Science Foundation of China for Creative Research Groups(No.51921003)。
文摘In aero-engines,mortise-tenon joint structures are often used to connect the blades to the turbine disk.The disadvantages associated with conventional manufacturing techniques mean that a low-cost,high-efficiency,and high-quality nickel-based mortise–tenon joint structure is an urgent requirement in the field of aviation engineering.Electrochemical cutting is a potential machining method for manufacturing these parts,as there is no tool degradation in the cutting process and high-quality surfaces can be obtained.To realize the electrochemical cutting of a mortise-tenon joint structure,a method using a tube electrode with helically distributed jet-flow holes on the side-wall is proposed.During feeding,the tube electrode rotates along its central axis.Flow field simulations show that the rotational speed of the tube electrode determines the direct spraying time of the high-speed electrolyte ejected from the jet-flow holes to the machining area,while the electrolyte pressure determines the flow rate of the electrolyte and the velocity of the electrolyte ejected from the jet-flow holes.The machining results using the proposed method are verified experimentally,and the machining parameters are optimized.Finally,mortise and tenon samples are successfully machined using 20 mm thick Inconel 718 alloy with a feeding rate of 5μm/s.
基金Project(2006AA05Z132) supported by the Hi-tech Research and Development Program of ChinaProject(50701011) supported by the National Natural Science Foundation of China+1 种基金Project(200711020703) supported by the Natural Science Foundation of Inner Mongolia, ChinaProject(NJzy08071) supported by Higher Education Science Research Project of Inner Mongolia, China
文摘The La-Mg-Ni system PuNi3-type La0.5Ce0.2Mg0.3Co0.4Ni2.6-xMnx(x=0,0.1,0.2,0.3,0.4) hydrogen storage alloys were prepared by casting and rapid quenching. The effects of the rapid quenching on the structure and electrochemical characteristics of the alloys were studied. The results obtained by XRD,SEM and TEM indicate that the as-cast and quenched alloys mainly consist of two major phases,(La,Mg)Ni3 and LaNi5,as well as a residual phase LaNi. The rapid quenching does not exert an obvious influence on the phase composition of the alloys,but it leads to an increase of the LaNi5 phase and a decrease of the(La,Mg)Ni3 phase. The as-quenched alloys have a nano-crystalline structure,and the grain sizes of the alloys are in the range of 20-30 nm. The results by the electrochemical measurements indicate that both the discharge capacity and the high rate discharge(HRD) ability of the alloy first increase and then decrease with the variety of quenching rate and obtain the maximum values at the special quenching rate which is changeable with the variety of Mn content. The rapid quenching significantly improves the cycle stabilities of the alloys,but it slightly impairs the activation capabilities of the alloys.
