This study examines the adaptive boundary control problem of flexible marine riser with internal flow coupling.The dynamic model of the flexible marine riser system with internal flow coupling is derived using the Ham...This study examines the adaptive boundary control problem of flexible marine riser with internal flow coupling.The dynamic model of the flexible marine riser system with internal flow coupling is derived using the Hamiltonian principle.An analysis of internal flow’s influence on the vibration characteristics of flexible marine risers is conducted.Then,for the uncertain environmental disturbance,the adaptive fuzzy logic system is introduced to dynamically approximate the boundary disturbance,and a robust adaptive fuzzy boundary control is proposed.The uniform boundedness of the closed-loop system is proved based on Lyapunov theory.The well-posedness of the closed-loop system is proved by operator semigroup theory.The proposed control’s effectiveness is validated through comparison with existing control methods.展开更多
The development of the adaptive cycle engine is a crucial direction of advanced fighter power sources in the near future.However,this new technology brings more uncertainty to the design of the control system.To addre...The development of the adaptive cycle engine is a crucial direction of advanced fighter power sources in the near future.However,this new technology brings more uncertainty to the design of the control system.To address the versatile thrust demand under complex dynamic characteristics of the adaptive cycle engine,this paper proposes a direct thrust estimation and control method based on the Model-Free Adaptive Control(MFAC)algorithm.First,an improved Sliding Mode Control-MFAC(SMC-MFAC)algorithm has been developed by introducing a sliding mode variable structure into the standard Full Format Dynamic Linearization-MFAC(FFDL-MFAC)and designing self-adaptive weight coefficients.Then a trivariate double-loop direct thrust control structure with a controller-based thrust estimator and an outer command compensation loop has been established.Through thrust feedback and command correction,accurate control under multi-mode and operation conditions is achieved.The main contribution of this paper is the improved algorithm that combines the tracking capability of the MFAC and the robustness of the SMC,thus enhancing the dynamic performance.Considering the requirements of the online thrust feedback,the designed MFAC-based thrust estimator significantly speeds up the calculation.Additionally,the proposed command correction module can achieve the adaptive thrust control without affecting the operation of the inner loop.Simulations and Hardware-in-Loop(HIL)experiments have been performed on an adaptive cycle engine component-level model to investigate the estimation and control effect under different modes and health conditions.The results demonstrate that both the thrust estimation precision and operation speed are significantly improved compared with Extended Kalman Filter(EKF).Furthermore,the system can accelerate the response of the controlled plant,reduce the overshoot,and realize the thrust recovery within the safety range when the engine encounters the degradation.展开更多
This paper investigates the problem of fuzzy adaptive finite-time inverse optimal control for active suspension systems(ASSs).The fuzzy logic systems(FLSs)are utilized to learn the unknown non-linear dynamics and an a...This paper investigates the problem of fuzzy adaptive finite-time inverse optimal control for active suspension systems(ASSs).The fuzzy logic systems(FLSs)are utilized to learn the unknown non-linear dynamics and an auxiliary system is established.Based on the finite-time stability theory and inverse optimal theory,a fuzzy adaptive inverse finite-time inverse optimal control method is proposed.It is proven that the formulated control approach guarantees the stability of the controlled systems,while ensuring that errors converge to a small neighborhood of zero within finite time.Moreover,the optimized control performance can be achieved.Eventually,the simulation results demonstrate the effectiveness of the proposed fuzzy adaptive finite-time inverse optimal control scheme.展开更多
This paper investigates the problem of cluster synchronization of master-slave complex net-works with time-varying delay via linear and adaptive feedback pinning controls.We need not non-delayed and delayed coupling m...This paper investigates the problem of cluster synchronization of master-slave complex net-works with time-varying delay via linear and adaptive feedback pinning controls.We need not non-delayed and delayed coupling matrices to be symmetric or irreducible.We have the advantages of using adaptive control method to reduce control gain and pinning control technology to reduce cost.By con-structing Lyapunov function,some sufficient synchronization criteria are established.Finally,numerical examples are employed to illustrate the effectiveness of the proposed approach.展开更多
In the field of flexible polishing,the accuracy of contact force control directly affects processing quality and material removal uniformity.However,the complex dynamic contact model and inherent strong hysteresis of ...In the field of flexible polishing,the accuracy of contact force control directly affects processing quality and material removal uniformity.However,the complex dynamic contact model and inherent strong hysteresis of pneumatic systems can significantly impact the force control accuracy of pneumatic polishing system end-effectors.To enhance responsiveness and control precision during the flexible polishing process,this study proposes an observer-based fuzzy adaptive control(OBFAC)scheme.To ensure control accuracy under an uncertain dynamic contact model,a fuzzy state observer is designed to estimate unmeasured states,while fuzzy logic approximates the uncertain nonlinear functions in the model to improve control performance.Additionally,the integral barrier Lyapunov function is employed to ensure that all states remain within predefined constraints.The stability of the proposed control scheme is analyzed using the Lyapunov function,and a pneumatic polishing experimental platform is constructed to conduct polishing contact force control experiments under multiple scenarios.Experimental results demonstrate that the proposed OBFAC scheme achieves superior tracking control performance compared to existing control schemes.展开更多
This article presents an adaptive optimal control method for a semi-active suspension system.The model of the suspension system is built,in which the components of uncertain parameters and exogenous disturbance are de...This article presents an adaptive optimal control method for a semi-active suspension system.The model of the suspension system is built,in which the components of uncertain parameters and exogenous disturbance are described.The adaptive optimal control law consists of the sum of the optimal control component and the adaptive control component.First,the optimal control law is designed for the model of the suspension system after ignoring the components of uncertain parameters and exogenous disturbance caused by the road surface.The optimal control law expresses the desired dynamic characteristics of the suspension system.Next,the adaptive component is designed with the purpose of compensating for the effects caused by uncertain parameters and exogenous disturbance caused by the road surface;the adaptive component has adaptive parameter rules to estimate uncertain parameters and exogenous disturbance.When exogenous disturbances are eliminated,the system responds with an optimal controller designed.By separating theoretically the dynamic of a semi-active suspension system,this solution allows the design of two separate controllers easily and has reduced the computational burden and the use of too many tools,thus allowing for more convenient hardware implementation.The simulation results also show the effectiveness of damping oscillations of the proposed solution in this article.展开更多
Sliding mode control(SMC)is a well-known robust nonlinear control method with strong robustness and fast response which has been widely used in many applications.This paper introduces the major results of SMC design m...Sliding mode control(SMC)is a well-known robust nonlinear control method with strong robustness and fast response which has been widely used in many applications.This paper introduces the major results of SMC design methods that the authors have achieved in the last decade.Undoubtedly,our results are obtained based on many other researchers'pioneer work in the literature which will not be discussed in detail here.Notably,our development has a main focus on tackling practical issues such that a proposed or enhanced SMC approach is effectively applicable to motion control systems.Issues on sliding function and adaptive gain designs in SMC and their control features will be both discussed in this paper.Those issues comprise fast convergent speed,predefined convergent time,input saturation restriction,chattering reduction,and unknown disturbance suppression.Lastly,conclusion and a few remarks on future research directions are presented.展开更多
Tracking control of tendon-driven manipulators has become a prevalent research area.However,the existence of flexible elastic tendons generates substantial residual vibrations,resulting in difficulties for trajectory ...Tracking control of tendon-driven manipulators has become a prevalent research area.However,the existence of flexible elastic tendons generates substantial residual vibrations,resulting in difficulties for trajectory tracking control of the manipulator.This paper proposes the radial basis function neural network adaptive hierarchical sliding mode control(RBFNNA-HSMC)method,which combines the dynamic model of the elastic tendon-driven manipulator(ETDM)with radial basis neural network adaptive control and hierarchical sliding mode control technology.The aim is to achieve trajectory tracking control of ETDM even under conditions of model inaccuracy and disturbance.The Lyapunov stability theory demonstrates the stability of the proposed RBFNNA-HSM controller.In order to assess the effectiveness and adaptability of the proposed control method,simulations and experiments were performed on a two-DOF ETDM.The RBFNNA-HSM method shows superior tracking accuracy compared to traditional modelbased HSM control.The experiment shows that the maximum tracking error for ETDM double-joint trajectory tracking is below 2.593×10-3rad and 1.624×10-3rad,respectively.展开更多
In this study,we consider a single-link flexible manipulator in the presence of an unknown Bouc-Wen type of hysteresis and intermittent actuator faults.First,an inverse hysteresis dynamics model is introduced,and then...In this study,we consider a single-link flexible manipulator in the presence of an unknown Bouc-Wen type of hysteresis and intermittent actuator faults.First,an inverse hysteresis dynamics model is introduced,and then the control input is divided into an expected input and an error compensator.Second,a novel adaptive neural network-based control scheme is proposed to cancel the unknown input hysteresis.Subsequently,by modifying the adaptive laws and local control laws,a fault-tolerant control strategy is applied to address uncertain intermittent actuator faults in a flexible manipulator system.Through the direct Lyapunov theory,the proposed scheme allows the state errors to asymptotically converge to a specified interval.Finally,the effectiveness of the proposed scheme is verified through numerical simulations and experiments.展开更多
Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncerta...Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncertain systems characterized by unknown control directions and time-varying input delay lacks comprehensive solutions.In this paper,we propose an observerbased adaptive tracking controller to address this gap.Neural networks are utilized to handle uncertainty,and a unique coordinate transformation is employed to untangle the coupling between input delay and unknown control directions.Subsequently,a new auxiliary signal counters the impact of time-varying input delay,while a Nussbaum function is introduced to solve the problem of unknown control directions.The leverage of an advanced dynamic surface control technique avoids the“complexity explosion”and reduces boundary layer errors.Synthesizing these techniques ensures that all the closed-loop signals are semi-globally uniformly ultimately bounded(SGUUB),and the tracking error converges to a small region around the origin by selecting suitable parameters.Simulation examples are provided to demonstrate the feasibility of the proposed approach.展开更多
A robust Adaptive Discrete-time Sliding Mode Controller (ADSMC) is formulated, and is applied to control the pitch motion of a simulated Flapping-Wing Micro Air Vehicle (FWMAV). There is great potential for FWMAVs to ...A robust Adaptive Discrete-time Sliding Mode Controller (ADSMC) is formulated, and is applied to control the pitch motion of a simulated Flapping-Wing Micro Air Vehicle (FWMAV). There is great potential for FWMAVs to be used as aerial tools to assist with gathering data and surveying environments. Thanks to modern manufacturing and technology, along with an increased comprehension behind the aerodynamics of wing flaps, these vehicles are now a reality, though not without limitations. Given their diminutive size, FWMAVs are susceptible to real-world disturbances, such as wind gusts, and are sensitive to particular variations in their build quality. While external forces such as wind gusts can be reasonably bounded, the unknown variations in the state may be difficult to characterize or bound without affecting performance. To address these problems, an ADSMC is developed. First, the FWMAV model is converted from continuous-time to discrete-time. Second, an ADSMC for the newly discretized FWMAV model is developed. Using this controller, the trajectory tracking performance of the FWMAV is assessed against a traditional discrete sliding mode controller, and is found to have a decreased chattering frequency and decreased control effort for the same task. Therefore, the ADSMC is assessed as the superior controller, despite being completely unaware of the model parameters or wind gust.展开更多
With the advancement of connected vehicle(CV)technology,an increasing number of CVs will appear on urban roads.Data collected by CVs can be used to optimize signal parameters at intersections,thus improving traffic ef...With the advancement of connected vehicle(CV)technology,an increasing number of CVs will appear on urban roads.Data collected by CVs can be used to optimize signal parameters at intersections,thus improving traffic efficiency.In this study,we design a real-time adaptive signal control method for an arterial road with multiple intersections with low penetration rates.By utilizing vehicle arrival information collected by CVs,our method rapidly determines optimal signal phasing and timing(SPaT).The proposed adaptive signal control method was tested with the Simulation of Urban Mobility(SUMO)software,and was found to reduce total travel delay in the network better than a fixed coordination control method.The performance of the proposed method in reducing travel delay is expected to improve as CV detection range increases.展开更多
A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage c...A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage coupling between drive cables and passive joints in CDRM leads to a challenging dynamic model with difficult parameter identification,complicating the efforts to achieve accurate modeling and control.To address these challenges,this paper proposes a dynamic modeling and adaptive control approach tailored for CDRM systems.A multilevel kinematic model of the cable-driven redundant manipulator is presented,and a screw theory is employed to represent the cable tension and cable contact forces as spatial wrenches,which are equivalently mapped to joint torque using the principle of virtual work.This approach simplifies the mapping process while maintaining the integrity of the dynamic model.A recursive method is used to compute cable tension section-by-section for enhancing the efficiency of inverse dynamics calculations and meeting the high-frequency demands of the controller,thereby avoiding large matrix operations.An adaptive control method is proposed building on this foundation,which involves the design of a dynamic parameter adaptive controller in the joint space to simplify the linearization process of the dynamic equations along with a closed-loop controller that incorporates motor parameters in the driving space.This approach improves the control accuracy and dynamic performance of the CDRM under dynamic uncertainties.The accuracy and computational efficiency of the dynamic model are validated through simulations,and the effectiveness of the proposed control method is demonstrated through control tests.This paper presents a dynamic modeling and adaptive control approach for CDRM to enhance accuracy and performance under dynamic uncertainties.展开更多
Wireless communication-enabled Cooperative Adaptive Cruise Control(CACC)is expected to improve the safety and traffic capacity of vehicle platoons.Existing CACC considers a conventional communication delay with fixed ...Wireless communication-enabled Cooperative Adaptive Cruise Control(CACC)is expected to improve the safety and traffic capacity of vehicle platoons.Existing CACC considers a conventional communication delay with fixed Vehicular Communication Network(VCN)topologies.However,when the network is under attack,the communication delay may be much higher,and the stability of the system may not be guaranteed.This paper proposes a novel communication Delay Aware CACC with Dynamic Network Topologies(DADNT).The main idea is that for various communication delays,in order to maximize the traffic capacity while guaranteeing stability and minimizing the following error,the CACC should dynamically adjust the VCN network topology to achieve the minimum inter-vehicle spacing.To this end,a multi-objective optimization problem is formulated,and a 3-step Divide-And-Conquer sub-optimal solution(3DAC)is proposed.Simulation results show that with 3DAC,the proposed DADNT with CACC can reduce the inter-vehicle spacing by 5%,10%,and 14%,respectively,compared with the traditional CACC with fixed one-vehicle,two-vehicle,and three-vehicle look-ahead network topologies,thereby improving the traffic efficiency.展开更多
This paper deeply introduces a brand-new research method for the synchronous characteristics of DC microgrid bus voltage and an improved synchronous control strategy.This method mainly targets the problem of bus volta...This paper deeply introduces a brand-new research method for the synchronous characteristics of DC microgrid bus voltage and an improved synchronous control strategy.This method mainly targets the problem of bus voltage oscillation caused by the bifurcation behavior of DC microgrid converters.Firstly,the article elaborately establishes a mathematical model of a single distributed power source with hierarchical control.On this basis,a smallworld network model that can better adapt to the topology structure of DC microgrids is further constructed.Then,a voltage synchronization analysis method based on the main stability function is proposed,and the synchronous characteristics of DC bus voltage are deeply studied by analyzing the size of the minimum non-zero eigenvalue.In view of the situation that the line coupling strength between distributed power sources is insufficient to achieve bus voltage synchronization,this paper innovatively proposes a new improved adaptive controller to effectively control voltage synchronization.And the convergence of the designed controller is strictly proved by using Lyapunov’s stability theorem.Finally,the effectiveness and feasibility of the designed controller in this paper are fully verified through detailed simulation experiments.After comparative analysis with the traditional adaptive controller,it is found that the newly designed controller can make the bus voltages of each distributed power source achieve synchronization more quickly,and is significantly superior to the traditional adaptive controller in terms of anti-interference performance.展开更多
In this paper,a pair of dynamic high-gain observer and output feedback controller is proposed for nonlinear systems with multiple unknown time delays.By constructing Lyapunov-Krasovskii functionals,it shows that globa...In this paper,a pair of dynamic high-gain observer and output feedback controller is proposed for nonlinear systems with multiple unknown time delays.By constructing Lyapunov-Krasovskii functionals,it shows that global state asymptotic regulation can be ensured by introducing a single dynamic gain;furthermore,global asymptotic stabilization can be achieved by choosing a sufficiently large static scaling gain when the upper bounds of all system parameters are known.Especially,the output coefficient is allowed to be non-differentiable with unknown upper bound.This paper proposes a generalized Lyapunov matrix inequality based dynamic-gain scaling method,which significantly simplifies the design computational complexity by comparing with the classic backstepping method.展开更多
Aiming at the problems of large fluctuation of output active power and poor control performance in the process of frequency support of an energy-storage-type static-var-generator(ESVG),the adaptive adjustment control ...Aiming at the problems of large fluctuation of output active power and poor control performance in the process of frequency support of an energy-storage-type static-var-generator(ESVG),the adaptive adjustment control method for its active-loop parameters is used to realize thewind-farmfrequency support,which has become the current research hotspot.Taking the ESVG with a supercapacitor on the DC side as the research object,the influence trend of the change of virtual rotation inertia and virtual damping coefficient on its virtual angular velocity and power angle is analyzed.Then,the constraint relationship between the equivalent virtual inertia time constant of the supercapacitor and the virtual rotation inertia of the ESVG is clarified.Then,combined with the second-order response characteristics of the ESVG power control loop,the selection principles of the frequency modulation coefficient,the virtual rotation inertia,and the virtual damping coefficient are determined.An ESVG adjustment control method,considering the adaptive adjustment of the active loop parameters of the supercapacitor equivalent inertia,is proposed.While ensuring the frequency support capability of the ESVG,the fluctuation degree of its output active power and the virtual angular velocity are suppressed,and the proposed adjustment method also improves the stability of the ESVG control system and the frequency support capability for the wind farm.Finally,the simulation verifies the correctness of the theoretical analysis and the effectiveness of the proposed strategy.展开更多
This paper studies motor joint control of a 4-degree-of-freedom(DoF)robotic manipulator using learning-based Adaptive Dynamic Programming(ADP)approach.The manipulator’s dynamics are modelled as an open-loop 4-link se...This paper studies motor joint control of a 4-degree-of-freedom(DoF)robotic manipulator using learning-based Adaptive Dynamic Programming(ADP)approach.The manipulator’s dynamics are modelled as an open-loop 4-link serial kinematic chain with 4 Degrees of Freedom(DoF).Decentralised optimal controllers are designed for each link using ADP approach based on a set of cost matrices and data collected from exploration trajectories.The proposed control strategy employs an off-line,off-policy iterative approach to derive four optimal control policies,one for each joint,under exploration strategies.The objective of the controller is to control the position of each joint.Simulation and experimental results show that four independent optimal controllers are found,each under similar exploration strategies,and the proposed ADP approach successfully yields optimal linear control policies despite the presence of these complexities.The experimental results conducted on the Quanser Qarm robotic platform demonstrate the effectiveness of the proposed ADP controllers in handling significant dynamic nonlinearities,such as actuation limitations,output saturation,and filter delays.展开更多
The adaptive H_(∞) finite-time boundedness control problem is studied for a set of nonlinear singular Hamiltonian system(NSHS)in this article.Under an appropriate adaptive state feedback,the NSHS can be equivalently ...The adaptive H_(∞) finite-time boundedness control problem is studied for a set of nonlinear singular Hamiltonian system(NSHS)in this article.Under an appropriate adaptive state feedback,the NSHS can be equivalently transformed into a differential-algebraic system.Next,it is proved that the state feedback can be used as an adaptive H_(∞) finite-time boundedness controller of NSHS.Finally,the effectiveness of the controller designed is verified by an illustrative example of a nonlinear singular circuit system.展开更多
A fuzzy adaptive admittance control method based on real-time estimation is proposed for the motion of the hexapod wheeled-legged robot in various environments.Firstly,the mechanical structure of the robot is designed...A fuzzy adaptive admittance control method based on real-time estimation is proposed for the motion of the hexapod wheeled-legged robot in various environments.Firstly,the mechanical structure of the robot is designed,and a control system framework is proposed according to the different motion environments.To address the adaptability issue of the robot foot contact with the ground,a position-based admittance control method is proposed.Secondly,to improve the tracking performance of the robot foot contact force when the ground environment changes,a fuzzy adaptive admittance parameter adjustment method is proposed.Furthermore,to address the problem of sudden changes in the tracking difference of the foot contact force when the ground environment changes,a real-time estimation method is proposed to estimate the dynamic foot contact force.Finally,a simulation experiment is conducted in MATLAB and Simscape to verify the effectiveness of the robot motion control system,admittance control,fuzzy adaptive admittance parameters adjustment,and the realtime estimation method.Through multi-scenario experiments with the robot prototype,the control method demonstrates its effectiveness and adaptability in various environments.展开更多
基金financially supported by Sichuan Science and Technology Program(Grant No.2023NSFSC1980).
文摘This study examines the adaptive boundary control problem of flexible marine riser with internal flow coupling.The dynamic model of the flexible marine riser system with internal flow coupling is derived using the Hamiltonian principle.An analysis of internal flow’s influence on the vibration characteristics of flexible marine risers is conducted.Then,for the uncertain environmental disturbance,the adaptive fuzzy logic system is introduced to dynamically approximate the boundary disturbance,and a robust adaptive fuzzy boundary control is proposed.The uniform boundedness of the closed-loop system is proved based on Lyapunov theory.The well-posedness of the closed-loop system is proved by operator semigroup theory.The proposed control’s effectiveness is validated through comparison with existing control methods.
基金supported by National Natural Science Foundation of China(No.52302472)。
文摘The development of the adaptive cycle engine is a crucial direction of advanced fighter power sources in the near future.However,this new technology brings more uncertainty to the design of the control system.To address the versatile thrust demand under complex dynamic characteristics of the adaptive cycle engine,this paper proposes a direct thrust estimation and control method based on the Model-Free Adaptive Control(MFAC)algorithm.First,an improved Sliding Mode Control-MFAC(SMC-MFAC)algorithm has been developed by introducing a sliding mode variable structure into the standard Full Format Dynamic Linearization-MFAC(FFDL-MFAC)and designing self-adaptive weight coefficients.Then a trivariate double-loop direct thrust control structure with a controller-based thrust estimator and an outer command compensation loop has been established.Through thrust feedback and command correction,accurate control under multi-mode and operation conditions is achieved.The main contribution of this paper is the improved algorithm that combines the tracking capability of the MFAC and the robustness of the SMC,thus enhancing the dynamic performance.Considering the requirements of the online thrust feedback,the designed MFAC-based thrust estimator significantly speeds up the calculation.Additionally,the proposed command correction module can achieve the adaptive thrust control without affecting the operation of the inner loop.Simulations and Hardware-in-Loop(HIL)experiments have been performed on an adaptive cycle engine component-level model to investigate the estimation and control effect under different modes and health conditions.The results demonstrate that both the thrust estimation precision and operation speed are significantly improved compared with Extended Kalman Filter(EKF).Furthermore,the system can accelerate the response of the controlled plant,reduce the overshoot,and realize the thrust recovery within the safety range when the engine encounters the degradation.
基金supported by the National Natural Science Foundation of China under 62173172。
文摘This paper investigates the problem of fuzzy adaptive finite-time inverse optimal control for active suspension systems(ASSs).The fuzzy logic systems(FLSs)are utilized to learn the unknown non-linear dynamics and an auxiliary system is established.Based on the finite-time stability theory and inverse optimal theory,a fuzzy adaptive inverse finite-time inverse optimal control method is proposed.It is proven that the formulated control approach guarantees the stability of the controlled systems,while ensuring that errors converge to a small neighborhood of zero within finite time.Moreover,the optimized control performance can be achieved.Eventually,the simulation results demonstrate the effectiveness of the proposed fuzzy adaptive finite-time inverse optimal control scheme.
文摘This paper investigates the problem of cluster synchronization of master-slave complex net-works with time-varying delay via linear and adaptive feedback pinning controls.We need not non-delayed and delayed coupling matrices to be symmetric or irreducible.We have the advantages of using adaptive control method to reduce control gain and pinning control technology to reduce cost.By con-structing Lyapunov function,some sufficient synchronization criteria are established.Finally,numerical examples are employed to illustrate the effectiveness of the proposed approach.
基金Supported by National Key Research and Development Program of China(Grant No.2022YFB3403402)National Natural Science Foundation of China Basic Research Programme for PhD Students(Grant No.524B2049)。
文摘In the field of flexible polishing,the accuracy of contact force control directly affects processing quality and material removal uniformity.However,the complex dynamic contact model and inherent strong hysteresis of pneumatic systems can significantly impact the force control accuracy of pneumatic polishing system end-effectors.To enhance responsiveness and control precision during the flexible polishing process,this study proposes an observer-based fuzzy adaptive control(OBFAC)scheme.To ensure control accuracy under an uncertain dynamic contact model,a fuzzy state observer is designed to estimate unmeasured states,while fuzzy logic approximates the uncertain nonlinear functions in the model to improve control performance.Additionally,the integral barrier Lyapunov function is employed to ensure that all states remain within predefined constraints.The stability of the proposed control scheme is analyzed using the Lyapunov function,and a pneumatic polishing experimental platform is constructed to conduct polishing contact force control experiments under multiple scenarios.Experimental results demonstrate that the proposed OBFAC scheme achieves superior tracking control performance compared to existing control schemes.
基金supported in part by the Thai Nguyen University of Technology,Vietnam.
文摘This article presents an adaptive optimal control method for a semi-active suspension system.The model of the suspension system is built,in which the components of uncertain parameters and exogenous disturbance are described.The adaptive optimal control law consists of the sum of the optimal control component and the adaptive control component.First,the optimal control law is designed for the model of the suspension system after ignoring the components of uncertain parameters and exogenous disturbance caused by the road surface.The optimal control law expresses the desired dynamic characteristics of the suspension system.Next,the adaptive component is designed with the purpose of compensating for the effects caused by uncertain parameters and exogenous disturbance caused by the road surface;the adaptive component has adaptive parameter rules to estimate uncertain parameters and exogenous disturbance.When exogenous disturbances are eliminated,the system responds with an optimal controller designed.By separating theoretically the dynamic of a semi-active suspension system,this solution allows the design of two separate controllers easily and has reduced the computational burden and the use of too many tools,thus allowing for more convenient hardware implementation.The simulation results also show the effectiveness of damping oscillations of the proposed solution in this article.
基金supported by the Natural Science Basic Research Program of Shaanxi with Grant No.2025JC-YBQN-807。
文摘Sliding mode control(SMC)is a well-known robust nonlinear control method with strong robustness and fast response which has been widely used in many applications.This paper introduces the major results of SMC design methods that the authors have achieved in the last decade.Undoubtedly,our results are obtained based on many other researchers'pioneer work in the literature which will not be discussed in detail here.Notably,our development has a main focus on tackling practical issues such that a proposed or enhanced SMC approach is effectively applicable to motion control systems.Issues on sliding function and adaptive gain designs in SMC and their control features will be both discussed in this paper.Those issues comprise fast convergent speed,predefined convergent time,input saturation restriction,chattering reduction,and unknown disturbance suppression.Lastly,conclusion and a few remarks on future research directions are presented.
基金Supported by Key R&D Project of Zhejiang(Grant No.2022C02052)。
文摘Tracking control of tendon-driven manipulators has become a prevalent research area.However,the existence of flexible elastic tendons generates substantial residual vibrations,resulting in difficulties for trajectory tracking control of the manipulator.This paper proposes the radial basis function neural network adaptive hierarchical sliding mode control(RBFNNA-HSMC)method,which combines the dynamic model of the elastic tendon-driven manipulator(ETDM)with radial basis neural network adaptive control and hierarchical sliding mode control technology.The aim is to achieve trajectory tracking control of ETDM even under conditions of model inaccuracy and disturbance.The Lyapunov stability theory demonstrates the stability of the proposed RBFNNA-HSM controller.In order to assess the effectiveness and adaptability of the proposed control method,simulations and experiments were performed on a two-DOF ETDM.The RBFNNA-HSM method shows superior tracking accuracy compared to traditional modelbased HSM control.The experiment shows that the maximum tracking error for ETDM double-joint trajectory tracking is below 2.593×10-3rad and 1.624×10-3rad,respectively.
基金supported in part by the National Key Research and Development Program of China(2023YFB4706400)the National Natural Science Foundation of China(62273112,62073030,62203161)+6 种基金the Guangdong Basic and Applied Basic Research Foundation(2023B1515120018,2023B1515120019)the Open Project of Xiangjiang Laboratory(23XJ03012)the Natural Science Foundation of Hunan Province(2024JJ5087)the Natural Science Foundation of Jiangxi Province(20232BAB212024)the National Research Foundation of Korea funded by the Ministry of Science and ICT,South Korea(IRIS-2023-00207954)the Science and Technology Planning Project of Guangzhou,China(2023A03J0120)the Guangzhou University Research Project(RC2023037)
文摘In this study,we consider a single-link flexible manipulator in the presence of an unknown Bouc-Wen type of hysteresis and intermittent actuator faults.First,an inverse hysteresis dynamics model is introduced,and then the control input is divided into an expected input and an error compensator.Second,a novel adaptive neural network-based control scheme is proposed to cancel the unknown input hysteresis.Subsequently,by modifying the adaptive laws and local control laws,a fault-tolerant control strategy is applied to address uncertain intermittent actuator faults in a flexible manipulator system.Through the direct Lyapunov theory,the proposed scheme allows the state errors to asymptotically converge to a specified interval.Finally,the effectiveness of the proposed scheme is verified through numerical simulations and experiments.
基金National Natural Science Foundation of China(62373102)Jiangsu Natural Science Foundation(BK20221455)Anhui Provincial Key Research and Development Project(2022i01020013)。
文摘Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncertain systems characterized by unknown control directions and time-varying input delay lacks comprehensive solutions.In this paper,we propose an observerbased adaptive tracking controller to address this gap.Neural networks are utilized to handle uncertainty,and a unique coordinate transformation is employed to untangle the coupling between input delay and unknown control directions.Subsequently,a new auxiliary signal counters the impact of time-varying input delay,while a Nussbaum function is introduced to solve the problem of unknown control directions.The leverage of an advanced dynamic surface control technique avoids the“complexity explosion”and reduces boundary layer errors.Synthesizing these techniques ensures that all the closed-loop signals are semi-globally uniformly ultimately bounded(SGUUB),and the tracking error converges to a small region around the origin by selecting suitable parameters.Simulation examples are provided to demonstrate the feasibility of the proposed approach.
文摘A robust Adaptive Discrete-time Sliding Mode Controller (ADSMC) is formulated, and is applied to control the pitch motion of a simulated Flapping-Wing Micro Air Vehicle (FWMAV). There is great potential for FWMAVs to be used as aerial tools to assist with gathering data and surveying environments. Thanks to modern manufacturing and technology, along with an increased comprehension behind the aerodynamics of wing flaps, these vehicles are now a reality, though not without limitations. Given their diminutive size, FWMAVs are susceptible to real-world disturbances, such as wind gusts, and are sensitive to particular variations in their build quality. While external forces such as wind gusts can be reasonably bounded, the unknown variations in the state may be difficult to characterize or bound without affecting performance. To address these problems, an ADSMC is developed. First, the FWMAV model is converted from continuous-time to discrete-time. Second, an ADSMC for the newly discretized FWMAV model is developed. Using this controller, the trajectory tracking performance of the FWMAV is assessed against a traditional discrete sliding mode controller, and is found to have a decreased chattering frequency and decreased control effort for the same task. Therefore, the ADSMC is assessed as the superior controller, despite being completely unaware of the model parameters or wind gust.
基金supported by the Program of Humanities and Social Science of the Ministry of Education of China(No.24YJA630013)the Natural Science Foundation of Ningbo of China(No.2024J125)the“Innovation Yongjiang 2035”Key R&D Programme(No.2024H032),China。
文摘With the advancement of connected vehicle(CV)technology,an increasing number of CVs will appear on urban roads.Data collected by CVs can be used to optimize signal parameters at intersections,thus improving traffic efficiency.In this study,we design a real-time adaptive signal control method for an arterial road with multiple intersections with low penetration rates.By utilizing vehicle arrival information collected by CVs,our method rapidly determines optimal signal phasing and timing(SPaT).The proposed adaptive signal control method was tested with the Simulation of Urban Mobility(SUMO)software,and was found to reduce total travel delay in the network better than a fixed coordination control method.The performance of the proposed method in reducing travel delay is expected to improve as CV detection range increases.
基金Supported by National Natural Science Foundation of China(Grant No.52405040)Research Project of State Key Laboratory of Mechanical System and Vibration(Grant No.MSV202514)。
文摘A cable-driven redundant manipulator(CDRM)characterized by redundant degrees of freedom and a lightweight,slender design can perform tasks in confined and restricted spaces efficiently.However,the complex multistage coupling between drive cables and passive joints in CDRM leads to a challenging dynamic model with difficult parameter identification,complicating the efforts to achieve accurate modeling and control.To address these challenges,this paper proposes a dynamic modeling and adaptive control approach tailored for CDRM systems.A multilevel kinematic model of the cable-driven redundant manipulator is presented,and a screw theory is employed to represent the cable tension and cable contact forces as spatial wrenches,which are equivalently mapped to joint torque using the principle of virtual work.This approach simplifies the mapping process while maintaining the integrity of the dynamic model.A recursive method is used to compute cable tension section-by-section for enhancing the efficiency of inverse dynamics calculations and meeting the high-frequency demands of the controller,thereby avoiding large matrix operations.An adaptive control method is proposed building on this foundation,which involves the design of a dynamic parameter adaptive controller in the joint space to simplify the linearization process of the dynamic equations along with a closed-loop controller that incorporates motor parameters in the driving space.This approach improves the control accuracy and dynamic performance of the CDRM under dynamic uncertainties.The accuracy and computational efficiency of the dynamic model are validated through simulations,and the effectiveness of the proposed control method is demonstrated through control tests.This paper presents a dynamic modeling and adaptive control approach for CDRM to enhance accuracy and performance under dynamic uncertainties.
基金supported by the National Natural Science Foundation of China under Grant U21A20449in part by Jiangsu Provincial Key Research and Development Program under Grant BE2021013-2。
文摘Wireless communication-enabled Cooperative Adaptive Cruise Control(CACC)is expected to improve the safety and traffic capacity of vehicle platoons.Existing CACC considers a conventional communication delay with fixed Vehicular Communication Network(VCN)topologies.However,when the network is under attack,the communication delay may be much higher,and the stability of the system may not be guaranteed.This paper proposes a novel communication Delay Aware CACC with Dynamic Network Topologies(DADNT).The main idea is that for various communication delays,in order to maximize the traffic capacity while guaranteeing stability and minimizing the following error,the CACC should dynamically adjust the VCN network topology to achieve the minimum inter-vehicle spacing.To this end,a multi-objective optimization problem is formulated,and a 3-step Divide-And-Conquer sub-optimal solution(3DAC)is proposed.Simulation results show that with 3DAC,the proposed DADNT with CACC can reduce the inter-vehicle spacing by 5%,10%,and 14%,respectively,compared with the traditional CACC with fixed one-vehicle,two-vehicle,and three-vehicle look-ahead network topologies,thereby improving the traffic efficiency.
基金supported by the National Natural Science Foundation of China(Nos.51767017 and 51867015)the Basic Research and Innovation Group Project of Gansu(No.18JR3RA13)the Major Science and Technology Project of Gansu(No.19ZD2GA003).
文摘This paper deeply introduces a brand-new research method for the synchronous characteristics of DC microgrid bus voltage and an improved synchronous control strategy.This method mainly targets the problem of bus voltage oscillation caused by the bifurcation behavior of DC microgrid converters.Firstly,the article elaborately establishes a mathematical model of a single distributed power source with hierarchical control.On this basis,a smallworld network model that can better adapt to the topology structure of DC microgrids is further constructed.Then,a voltage synchronization analysis method based on the main stability function is proposed,and the synchronous characteristics of DC bus voltage are deeply studied by analyzing the size of the minimum non-zero eigenvalue.In view of the situation that the line coupling strength between distributed power sources is insufficient to achieve bus voltage synchronization,this paper innovatively proposes a new improved adaptive controller to effectively control voltage synchronization.And the convergence of the designed controller is strictly proved by using Lyapunov’s stability theorem.Finally,the effectiveness and feasibility of the designed controller in this paper are fully verified through detailed simulation experiments.After comparative analysis with the traditional adaptive controller,it is found that the newly designed controller can make the bus voltages of each distributed power source achieve synchronization more quickly,and is significantly superior to the traditional adaptive controller in terms of anti-interference performance.
基金supported by the Zhejiang Provincial Natural Science Foundation(LY24F030011,LY23F030005)the National Natural Science Foundation of China(62373131).
文摘In this paper,a pair of dynamic high-gain observer and output feedback controller is proposed for nonlinear systems with multiple unknown time delays.By constructing Lyapunov-Krasovskii functionals,it shows that global state asymptotic regulation can be ensured by introducing a single dynamic gain;furthermore,global asymptotic stabilization can be achieved by choosing a sufficiently large static scaling gain when the upper bounds of all system parameters are known.Especially,the output coefficient is allowed to be non-differentiable with unknown upper bound.This paper proposes a generalized Lyapunov matrix inequality based dynamic-gain scaling method,which significantly simplifies the design computational complexity by comparing with the classic backstepping method.
基金funded by the Science and Technology Project of State Grid Corporation,grant number 5500-202329500A-3-2-ZN,funding data 2023.10–2025.12.
文摘Aiming at the problems of large fluctuation of output active power and poor control performance in the process of frequency support of an energy-storage-type static-var-generator(ESVG),the adaptive adjustment control method for its active-loop parameters is used to realize thewind-farmfrequency support,which has become the current research hotspot.Taking the ESVG with a supercapacitor on the DC side as the research object,the influence trend of the change of virtual rotation inertia and virtual damping coefficient on its virtual angular velocity and power angle is analyzed.Then,the constraint relationship between the equivalent virtual inertia time constant of the supercapacitor and the virtual rotation inertia of the ESVG is clarified.Then,combined with the second-order response characteristics of the ESVG power control loop,the selection principles of the frequency modulation coefficient,the virtual rotation inertia,and the virtual damping coefficient are determined.An ESVG adjustment control method,considering the adaptive adjustment of the active loop parameters of the supercapacitor equivalent inertia,is proposed.While ensuring the frequency support capability of the ESVG,the fluctuation degree of its output active power and the virtual angular velocity are suppressed,and the proposed adjustment method also improves the stability of the ESVG control system and the frequency support capability for the wind farm.Finally,the simulation verifies the correctness of the theoretical analysis and the effectiveness of the proposed strategy.
基金supported by the DEEPCOBOT project under Grant 306640/O70 funded by the Research Council of Norway.
文摘This paper studies motor joint control of a 4-degree-of-freedom(DoF)robotic manipulator using learning-based Adaptive Dynamic Programming(ADP)approach.The manipulator’s dynamics are modelled as an open-loop 4-link serial kinematic chain with 4 Degrees of Freedom(DoF).Decentralised optimal controllers are designed for each link using ADP approach based on a set of cost matrices and data collected from exploration trajectories.The proposed control strategy employs an off-line,off-policy iterative approach to derive four optimal control policies,one for each joint,under exploration strategies.The objective of the controller is to control the position of each joint.Simulation and experimental results show that four independent optimal controllers are found,each under similar exploration strategies,and the proposed ADP approach successfully yields optimal linear control policies despite the presence of these complexities.The experimental results conducted on the Quanser Qarm robotic platform demonstrate the effectiveness of the proposed ADP controllers in handling significant dynamic nonlinearities,such as actuation limitations,output saturation,and filter delays.
基金supported by the National Nature Science Foundation of China (61877028, 61773015).
文摘The adaptive H_(∞) finite-time boundedness control problem is studied for a set of nonlinear singular Hamiltonian system(NSHS)in this article.Under an appropriate adaptive state feedback,the NSHS can be equivalently transformed into a differential-algebraic system.Next,it is proved that the state feedback can be used as an adaptive H_(∞) finite-time boundedness controller of NSHS.Finally,the effectiveness of the controller designed is verified by an illustrative example of a nonlinear singular circuit system.
基金National Natural Science Foundation of China(No.U1831123)。
文摘A fuzzy adaptive admittance control method based on real-time estimation is proposed for the motion of the hexapod wheeled-legged robot in various environments.Firstly,the mechanical structure of the robot is designed,and a control system framework is proposed according to the different motion environments.To address the adaptability issue of the robot foot contact with the ground,a position-based admittance control method is proposed.Secondly,to improve the tracking performance of the robot foot contact force when the ground environment changes,a fuzzy adaptive admittance parameter adjustment method is proposed.Furthermore,to address the problem of sudden changes in the tracking difference of the foot contact force when the ground environment changes,a real-time estimation method is proposed to estimate the dynamic foot contact force.Finally,a simulation experiment is conducted in MATLAB and Simscape to verify the effectiveness of the robot motion control system,admittance control,fuzzy adaptive admittance parameters adjustment,and the realtime estimation method.Through multi-scenario experiments with the robot prototype,the control method demonstrates its effectiveness and adaptability in various environments.
