In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→...In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.展开更多
The carbonylation of amines offers a promising route for synthesizing N-substituted carbamates with high atom economy.However,conventional catalysts exhibit limited catalytic efficiency,and the underlying proton trans...The carbonylation of amines offers a promising route for synthesizing N-substituted carbamates with high atom economy.However,conventional catalysts exhibit limited catalytic efficiency,and the underlying proton transfer mechanism remains elusive.Herein,we reported a metal-free,room-temperature strategy utilizing 1,5,7-triazabicyclo[4.4.0]dec-5-ene(TBD)as a dual hydrogen bond catalyst to synergistically activate propylamine(PA)and dimethyl carbonate(DMC).This green catalytic system achieves a 10-fold acceleration in reaction rate compared to other hydrogen bonding catalysts under mild conditions.This is enabled by dual hydrogen bonding of TBD with PA and DMC,which facilitates rapid proton transfer and stabilizes tetrahedral intermediates.Theoretical calculations confirm that the dual hydrogen bond system significantly lowers activation energy compared to single hydrogen bond analogs.Furthermore,it was revealed that the hydrogen bonding network within the product is the primary factor responsible for the sluggish reaction rate.This study demonstrates the effectiveness of a dual hydrogen bond system in accelerating the carbonylation of amines and provides a green route to access carbamates.展开更多
The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from...The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from the rack vehicle in traction conditions,a systematic test of the track subsystem was carried out on a large-slope test line.In the test,the bending stress of the rack teeth,the wheel-rail forces,and the acceleration of crucial components in the track system were measured.Subsequently,a detailed analysis was conducted on the tested signals of the rack railway track system in the time domain and the time-frequency domains.The test results indicate that the traction force significantly affects the rack tooth bending stress and the wheel-rail forces.The vibrations of the track system under the traction conditions are mainly caused by the impacts generated from the gear-rack engagement,which are then transferred to the sleepers,the rails,and the ballast beds.Furthermore,both the maximum stress on the racks and the wheel-rail forces measured on the rails remain below their allowable values.This experimental study evaluates the load characteristics and reveals the vibration characteristics of the rack railway track system under the vehicle’s ultimate load,which is very important for the load-strengthening design of the key components such as racks and the vibration and noise reduction of the track system.展开更多
Under earthquake action, different site conditions have a notable impact on the dynamic response of high-speed railway bridges after earthquakes, which in turn poses a threat to the running stability of trains in the ...Under earthquake action, different site conditions have a notable impact on the dynamic response of high-speed railway bridges after earthquakes, which in turn poses a threat to the running stability of trains in the post-earthquake period. Therefore, establishing a calculation method for the post-earthquake train speed threshold that considers the influence of different site characteristics is of great engineering significance. Taking the CRTS Ⅲ slab track as the research object, this study is based on the track irregularity root mean square rate(TRR), which the authors proposed earlier to quantify the track regularity level. Using the nonlinear least squares fitting method, the mapping relationship between the TRR and the postearthquake train running performance indicators on bridges is established. Furthermore, the influence of laws governing site categories and train speeds on post-earthquake train running performance on bridges is analyzed, and a train speed threshold for bridges based on running performance under random site conditions is proposed. The research results indicate that all train running performance indicators increase significantly with the increase of train operating speed;different site categories have a significant impact on post-earthquake track residual deformation and train running stability. The greater the amplitude of postearthquake track alignment residual deformation, the lower the threshold for the stable running speed of trains after the earthquake, with the speed threshold decreasing by up to 20%. The research outcomes can provide technical references for the post-earthquake safe operation and maintenance of high-speed railway bridges under complex site conditions, as well as the formulation of targeted train speed control schemes.展开更多
In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary c...In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary conditions on the flat bottom.Assuming“Reynolds roughness regime”,in which the thickness of the domain is very small compared to the wavelength of the roughness(i.e.a very slight roughness),we rigorously derive a generalized Reynolds equation for pressure,clearly showing the roughness-induced effects.Moreover,we give expressions for the average velocity and microrotation.展开更多
The main purpose of using geothermal energy piles(GEPs)is to enable the exploitation of geothermal energy for meeting the heating/cooling demands of buildings efficiently.However,the installation process of convention...The main purpose of using geothermal energy piles(GEPs)is to enable the exploitation of geothermal energy for meeting the heating/cooling demands of buildings efficiently.However,the installation process of conventional GEPs is inconvenient compared with that of traditional foundation piles.The pre-bored grouted planted geothermal energy pile(PGP GEP)is an innovative technology to simplify the installation process.Most investigations of in-situ experiments for conventional GEPs have focused on summer conditions.An in-situ test for a PGP GEP was conducted to analyze the temperature changes and thermo-mechanical characteristics under winter conditions.The results show that the average temperature of the pile decreased by 5.1℃,and the pile exhibited a general trend of high temperatures at both ends and low temperatures in the middle.In mechanics,strong pile end restraints resulted in smaller observed axial strain and higher axial thermal-induced force in the pile ends than at the middle of the pile.展开更多
To address the issue of scarce labeled samples and operational condition variations that degrade the accuracy of fault diagnosis models in variable-condition gearbox fault diagnosis,this paper proposes a semi-supervis...To address the issue of scarce labeled samples and operational condition variations that degrade the accuracy of fault diagnosis models in variable-condition gearbox fault diagnosis,this paper proposes a semi-supervised masked contrastive learning and domain adaptation(SSMCL-DA)method for gearbox fault diagnosis under variable conditions.Initially,during the unsupervised pre-training phase,a dual signal augmentation strategy is devised,which simultaneously applies random masking in the time domain and random scaling in the frequency domain to unlabeled samples,thereby constructing more challenging positive sample pairs to guide the encoder in learning intrinsic features robust to condition variations.Subsequently,a ConvNeXt-Transformer hybrid architecture is employed,integrating the superior local detail modeling capacity of ConvNeXt with the robust global perception capability of Transformer to enhance feature extraction in complex scenarios.Thereafter,a contrastive learning model is constructed with the optimization objective of maximizing feature similarity across different masked instances of the same sample,enabling the extraction of consistent features from multiple masked perspectives and reducing reliance on labeled data.In the final supervised fine-tuning phase,a multi-scale attention mechanism is incorporated for feature rectification,and a domain adaptation module combining Local Maximum Mean Discrepancy(LMMD)with adversarial learning is proposed.This module embodies a dual mechanism:LMMD facilitates fine-grained class-conditional alignment,compelling features of identical fault classes to converge across varying conditions,while the domain discriminator utilizes adversarial training to guide the feature extractor toward learning domain-invariant features.Working in concert,they markedly diminish feature distribution discrepancies induced by changes in load,rotational speed,and other factors,thereby boosting the model’s adaptability to cross-condition scenarios.Experimental evaluations on the WT planetary gearbox dataset and the Case Western Reserve University(CWRU)bearing dataset demonstrate that the SSMCL-DA model effectively identifies multiple fault classes in gearboxes,with diagnostic performance substantially surpassing that of conventional methods.Under cross-condition scenarios,the model attains fault diagnosis accuracies of 99.21%for the WT planetary gearbox and 99.86%for the bearings,respectively.Furthermore,the model exhibits stable generalization capability in cross-device settings.展开更多
BEIJING,Feb.25(Xinhua)-In a territory more than twice the size of the European Union and where per capita GDP varies up to fourfold across provincia level regions,the challenge of modernizing China with the right solu...BEIJING,Feb.25(Xinhua)-In a territory more than twice the size of the European Union and where per capita GDP varies up to fourfold across provincia level regions,the challenge of modernizing China with the right solutions for diverse localities has become a test of governance wisdom.展开更多
Ti(C,N)-Mo_(2)C-Ni cermet as alternative materials was explored for use in alkaline conditions,replacing the WC-Co cemented carbides,since Co is classified as a potentially carcinogenic substance and there is potentia...Ti(C,N)-Mo_(2)C-Ni cermet as alternative materials was explored for use in alkaline conditions,replacing the WC-Co cemented carbides,since Co is classified as a potentially carcinogenic substance and there is potential hazard of“hard metal disease”under the exposure to cobalt dust.The changes in microstructure,corrosion rate and volumetric loss rate of the two materials were compared under electrochemical corrosion and erosion-corrosion in alkaline environment.The results demonstrates that Ti(C,N)-Mo_(2)C-Ni cermet undergoes passivation when exposed to electrochemical corrosion of NaOH solution,resulting in a significant increase in oxygen content on the corroded surface.The corrosion rate of cermet is approximately one order of magnitude lower than that of the cemented carbide.Under the erosion-corrosion of an alkaline sand-water mixture,both the cermet and cemented carbide experience a gradual increase in volumetric loss rate with prolonging the erosion time.During erosion,the rim phase in cermet is fragile,so cracks easily penetrate it while the core phase remains intact.The medium-grained cemented carbide commonly demonstrates transgranular fracture mode,while in the fine-grained cemented carbide,cracks tend to propagate along phase boundaries.The erosive wear and damage caused by sand particles play a predominant role in the erosion-corrosion process of alkaline sand-water mixtures.This process represents an accelerated destructive phenomenon influenced and intensified by the combined effects of corrosion and erosion.It is confirmed that using cermet as an alternative anti-wear material to cemented carbides is feasible under alkaline conditions,and even better.展开更多
Actuator faults can be critical in turbofan engines as they can lead to stall,surge,loss of thrust and failure of speed control.Thus,fault diagnosis of gas turbine actuators has attracted considerable attention,from b...Actuator faults can be critical in turbofan engines as they can lead to stall,surge,loss of thrust and failure of speed control.Thus,fault diagnosis of gas turbine actuators has attracted considerable attention,from both academia and industry.However,the extensive literature that exists on this topic does not address identifying the severity of actuator faults and focuses mainly on actuator fault detection and isolation.In addition,previous studies of actuator fault identification have not dealt with multiple concurrent faults in real time,especially when these are accompanied by sudden failures under dynamic conditions.This study develops component-level models for fault identification in four typical actuators used in high-bypass ratio turbofan engines under both dynamic and steady-state conditions and these are then integrated with the engine performance model developed by the authors.The research results reported here present a novel method of quantifying actuator faults using dynamic effect compensation.The maximum error for each actuator is less than0.06%and 0.07%,with average computational time of less than 0.0058 s and 0.0086 s for steady-state and transient cases,respectively.These results confirm that the proposed method can accurately and efficiently identify concurrent actuator fault for an engine operating under either transient or steady-state conditions,even in the case of a sudden malfunction.The research results emonstrate the potential benefit to emergency response capabilities by introducing this method of monitoring the health of aero engines.展开更多
In cold regions,rock structures will be weakened by freeze-thaw cycles under various water immersion conditions.Determining how water immersion conditions impact rock deterioration under freeze-thaw cycles is critical...In cold regions,rock structures will be weakened by freeze-thaw cycles under various water immersion conditions.Determining how water immersion conditions impact rock deterioration under freeze-thaw cycles is critical to assess accurately the frost resistance of engineered rock.In this paper,freeze-thaw cycles(temperature range of-20℃-20℃)were performed on the sandstones in different water immersion conditions(fully,partially and non-immersed in water).Then,computed tomography(CT)tests were conducted on the sandstones when the freeze-thaw number reached 0,5,10,15,20 and 30.Next,the effects of water immersion conditions on the microstructure deterioration of sandstone under freezethaw cycles were evaluated using CT spatial imaging,porosity and damage factor.Finally,focusing on the partially immersed condition,the immersion volume rate was defined to understand the effects of immersion degree on the freeze-thaw damage of sandstone and to propose a damage model considering the freeze-thaw number and immersion degree.The results show that with increasing freeze-thaw number,the porosities and damage factors under fully and partially immersed conditions increase continuously,while those under non-immersed condition first increase and then remain approximately constant.The most severe freeze-thaw damage occurs in fully immersed condition,followed by partially immersed condition and finally non-immersed condition.Interestingly,the freeze-thaw number and the immersion volume rate both impact the microstructure deterioration of the partially immersed sandstone.For the same freeze-thaw number,the damage factor increases approximately linearly with increasing immersion volume rate,and the increasing immersion degree exacerbates the microstructure deterioration of sandstone.Moreover,the proposed model can effectively estimate the freeze-thaw damage of partially immersed sandstone with different immersion volume rates.展开更多
The potential of 2-amino-1-propanol(AP)as a novel depressant in selectively floating ilmenite from titanaugite under weakly acidic conditions was investigated.Micro-flotation results show that AP significantly reduces...The potential of 2-amino-1-propanol(AP)as a novel depressant in selectively floating ilmenite from titanaugite under weakly acidic conditions was investigated.Micro-flotation results show that AP significantly reduces the recovery of titanaugite while having no evident impact on ilmenite flotation.Subsequent bench-scale flotation tests further confirm a remarkable improvement in separation efficiency upon the introduction of AP.Contact angle and adsorption tests reveal a stronger affinity of AP towards the titanaugite surface in comparison to ilmenite.Zeta potential measurements and X-ray photoelectron spectroscopy(XPS)analyses exhibit favorable adsorption characteristics of AP on titanaugite,resulting from a synergy of electrostatic attraction and chemical interaction.In contrast,electrostatic repulsion hinders any significant interaction between AP and the ilmenite surface.These findings highlight the potential of AP as a highly efficient depressant for ilmenite flotation,paving the way for reduced reliance on sulfuric acid in the industry.展开更多
Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrai...Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrained(CU)and drained(CD)triaxial testing elucidated the impact of strain rate(0.005–0.3 mm/min)on strength envelopes,deformation moduli,pore pressures,and dilatancy characteristics of unsaturated and quasi-saturated loess.Under drained conditions with a controlled matric suction of 50 kPa,increasing strain rates from 0.005 mm/min to 0.011 mm/min induced decreases in failure deviatoric stress(qf),initial deformation modulus(Ei),and cohesion(c),while friction angles remained unaffected.Specimens displayed initial contractive volumetric strains transitioning to dilation across varying confining pressures.Higher rates diminished contractive volumetric strains and drainage volumes,indicating reduced densification and strength in the shear zone.Under undrained conditions,both unsaturated and quasi-saturated(pore pressure coefficient B=0.75)loess exhibited deteriorating mechanical properties with increasing rates from 0.03 mm/min to 0.3 mm/min.For unsaturated loess,reduced contractive volumetric strains at higher rates manifested relatively looser structures in the pre-peak stress phase.The strength decrement in quasi-saturated loess arose from elevated excess porewater pressures diminishing effective stresses.Negative porewater pressures emerged in quasi-saturated loess at lower confining pressures and strain rates.Compared to previous studies,the qf and Ei exhibited rate sensitivity below threshold values before attaining minima with marginal subsequent influence.The underlying mechanism mirrors the transition from creep to accelerated deformation phase of landslides.展开更多
The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it i...The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it is of great scientific significance to study the accumulation conditions of oil sand in different strata and mining areas of the Junggar Basin.Through a large number of field investigations,drilling verification and sampling tests,it is found that the oil sand in the region covers an area of 2000 km^(2),with shallow and thick reservoir,and predicted resource of 180 million tons.The oil sand resources are mainly distributed in four geological strata,namely the Middle Triassic Karamay Formation,Early Jurassic Badaowan Formation,Late Jurassic Qigu Formation,and Early Cretaceous Qingshuihe Formation.The reservoir is mainly composed of sandstone with high porosity and permeability,and the reservoir space is mainly intergranular pores with a medium average oil content.The oil sand deposit in the region is a typical destructive oil reservoir.The crude oil in the oil sand layer is degraded and thickened from the deep to the shallow,the content of saturated hydrocarbon decreased,and the content of aromatic hydrocarbon,non-hydrocarbon and asphaltene increased.The oil source comes from the deep Permian hydrocarbon-generating depression.Unconformities,faults and marginal fan delta-braided river depositional systems constitute effective migration and storage systems.Caprocks of the Upper Triassic Baijiantan Formation,Lower Jurassic Sangonghe Formation and Lower Cretaceous Hutubihe Formation were formed by three large scale lake transgressions.The Indosinian,Yanshan and Late Yanshan movements are the main driving forces for the migration of deep oil and gas to the shallow edge to form oil sand deposits.It is considered that the oil sand in the northwestern margin of Junggar Basin is of a slope complex migration type.展开更多
Rechargeable zinc(Zn)-ion batteries(RZIBs) with hydrogel electrolytes(HEs) have gained significant attention in the last decade owing to their high safety, low cost, sufficient material abundance, and superb environme...Rechargeable zinc(Zn)-ion batteries(RZIBs) with hydrogel electrolytes(HEs) have gained significant attention in the last decade owing to their high safety, low cost, sufficient material abundance, and superb environmental friendliness, which is extremely important for wearable energy storage applications. Given that HEs play a critical role in building flexible RZIBs, it is urgent to summarize the recent advances in this field and elucidate the design principles of HEs for practical applications. This review systematically presents the development history, recent advances in the material fundamentals, functional designs, challenges, and prospects of the HEs-based RZIBs. Firstly, the fundamentals, species, and flexible mechanisms of HEs are discussed, along with their compatibility with Zn anodes and various cathodes. Then, the functional designs of hydrogel electrolytes in harsh conditions are comprehensively discussed, including high/low/wide-temperature windows, mechanical deformations(e.g., bending, twisting, and straining), and damages(e.g., cutting, burning, and soaking). Finally, the remaining challenges and future perspectives for advancing HEs-based RZIBs are outlined.展开更多
Let d(n;r_(1),q_(1),r_(2),q_(2))be the number of factorization n=n_(1)n_(2)satisfying n_i≡r_i(mod q_i)(i=1,2)andΔ(x;r_(1),q_(1),r_(2),q_(2))be the error term of the summatory function of d(n;r_(1),q_(1),r_(2),q_(2))...Let d(n;r_(1),q_(1),r_(2),q_(2))be the number of factorization n=n_(1)n_(2)satisfying n_i≡r_i(mod q_i)(i=1,2)andΔ(x;r_(1),q_(1),r_(2),q_(2))be the error term of the summatory function of d(n;r_(1),q_(1),r_(2),q_(2)).Suppose x≥(q_(1)q_(2))^(1+ε),1≤r_i≤q_i,and(r_i,q_i)=1(i=1,2).This paper studies the power moments and sign changes ofΔ(x;r_(1),q_(1),r_(2),q_(2)).We prove that for sufficiently large constant C,Δ(q_(1)q_(2)x:r_(1),q_(1),r_(2),q_(2))changes sign in the interval[T,T+C√T]for any large T.Meanwhile,we show that for small constants c and c,there exist infinitely many subintervals of length c√log^(-7)T in[T,2T]where±Δ(q_(1)q_(2)x:r_(1),q_(1),r_(2),q_(2))>cx^(1/4)always holds.展开更多
ZnO is a highly significant II-VI semiconductor known for its excellent optoelectronic properties,making it widely applicable and promising for use in light-emitting devices,solar cells,lasers,and photodetectors.The m...ZnO is a highly significant II-VI semiconductor known for its excellent optoelectronic properties,making it widely applicable and promising for use in light-emitting devices,solar cells,lasers,and photodetectors.The methods for preparing ZnO are diverse,and among them,the hydrothermal method is favored for its simplicity,ease of operation,and low cost,making it an optimal choice for ZnO single-crystal growth.Most studies investigating the effects of different hydrothermal experimental parameters on the morphology and performance of ZnO nano-materials typically focus on only 2—3 variable parameters,with few examining the impact of all possible experimental parameter changes on ZnO nano-mate-rials.The principles of the hydrothermal method and its advantages in nano-material preparation were briefly introduced in this article.The detailed discussion on the influence of various experimental parameters on the preparation of ZnO nano-materials was provided,which including reaction materials,Zn^(2+)/OH^(-)ratio,reaction time and temperature,additives,experimental equipment,and annealing conditions.The review co-vers how different experimental parameters affect the morphology and performance of the materials,as well as how different rare earth doping elements influence the performance of ZnO nano-materials.It is hoped that this work will contribute to future research on the hydrothermal synthesis of nano-materials.展开更多
In addition to the organic matter type,abundance,thermal maturity,and shale reservoir space,the preservation conditions of source rocks play a key factor in affecting the quantity and quality of retained hydrocarbons ...In addition to the organic matter type,abundance,thermal maturity,and shale reservoir space,the preservation conditions of source rocks play a key factor in affecting the quantity and quality of retained hydrocarbons in source rocks of lacustrine shale,yet this aspect has received little attention.This paper,based on the case analysis,explores how preservation conditions influence the enrichment of mobile hydrocarbons in shale oil.Research showns that good preservation conditions play three key roles.(1)Ensure the retention of sufficient light hydrocarbons(C_(1)–C_(13)),medium hydrocarbons(C_(14)–C_(25))and small molecular aromatics(including 1–2 benzene rings)in the formation,which enhances the fluidity and flow of shale oil;(2)Maintain a high energy field(abnormally high pressure),thus facilitating the maximum outflow of shale oil;(3)Ensure that the retained hydrocarbons have the miscible flow condition of multi-component hydrocarbons(light hydrocarbons,medium hydrocarbons,heavy hydrocarbons,and heteroatomic compounds),so that the heavy hydrocarbons(C_(25+))and heavy components(non-hydrocarbons and asphaltenes)have improved fluidity and maximum flow capacity.In conclusion,in addition to the advantages of organic matter type,abundance,thermal maturity,and reservoir space,good preservation conditions of shale layers are essential for the formation of economically viable shale oil reservoirs,which should be incorporated into the evaluation criteria of shale oil-rich areas/segments and considered a necessary factor when selecting favorable exploration targets.展开更多
Dear Editor,H_(∞)This letter develops a new framework for the robust stability and performance conditions as well as the relevant controller synthesis with respect to uncertain robot manipulators.There often exist mo...Dear Editor,H_(∞)This letter develops a new framework for the robust stability and performance conditions as well as the relevant controller synthesis with respect to uncertain robot manipulators.There often exist model uncertainties between the nominal model and the real robot manipulator and disturbances. Hence, dealing with their effects plays a crucial role in leading to high tracking performances, as discussed in [1]–[5].展开更多
Based on the environmental conditions for the growth and development of potatoes,the impact of climatic conditions on potato cultivation in Shangdu County was analyzed.Due to significant fluctuations in temperature du...Based on the environmental conditions for the growth and development of potatoes,the impact of climatic conditions on potato cultivation in Shangdu County was analyzed.Due to significant fluctuations in temperature during the seedling stage of potatoes,less precipitation,and uneven temporal and spatial distribution of precipitation,the yield of potatoes is unstable.Therefore,scientific planting suggestions and meteorological service countermeasures were proposed.展开更多
基金Supported by the National Natural Science Foundation of China(Grant Nos.12361040,12061064)the National Science Foundation of Gansu Province(Grant No.22JR5RA264)State Scholarship Fund(Grant No.20230862021).
文摘In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.
基金financially supported by the National Key R&D Program of China(2023YFC3905400)the Clean Combustion and Low-carbon Utilization of Coal,Strategic Priority Research Program of the Chinese Academy of Sciences,Grant No.XDA 29000000.
文摘The carbonylation of amines offers a promising route for synthesizing N-substituted carbamates with high atom economy.However,conventional catalysts exhibit limited catalytic efficiency,and the underlying proton transfer mechanism remains elusive.Herein,we reported a metal-free,room-temperature strategy utilizing 1,5,7-triazabicyclo[4.4.0]dec-5-ene(TBD)as a dual hydrogen bond catalyst to synergistically activate propylamine(PA)and dimethyl carbonate(DMC).This green catalytic system achieves a 10-fold acceleration in reaction rate compared to other hydrogen bonding catalysts under mild conditions.This is enabled by dual hydrogen bonding of TBD with PA and DMC,which facilitates rapid proton transfer and stabilizes tetrahedral intermediates.Theoretical calculations confirm that the dual hydrogen bond system significantly lowers activation energy compared to single hydrogen bond analogs.Furthermore,it was revealed that the hydrogen bonding network within the product is the primary factor responsible for the sluggish reaction rate.This study demonstrates the effectiveness of a dual hydrogen bond system in accelerating the carbonylation of amines and provides a green route to access carbamates.
基金supported by the National Natural Science Foundation of China(No.52388102)the Sichuan Science and Technology Program(No.2024NSFTD0011)the Fundamental Research Funds for the State Key Laboratory of Rail Transit Vehicle System of Southwest Jiaotong University(No.2023TPL-T11).
文摘The dynamic characteristics of the track system can directly affect its service performance and failure process.To explore the load characteristics and dynamic response of the track system under the dynamic loads from the rack vehicle in traction conditions,a systematic test of the track subsystem was carried out on a large-slope test line.In the test,the bending stress of the rack teeth,the wheel-rail forces,and the acceleration of crucial components in the track system were measured.Subsequently,a detailed analysis was conducted on the tested signals of the rack railway track system in the time domain and the time-frequency domains.The test results indicate that the traction force significantly affects the rack tooth bending stress and the wheel-rail forces.The vibrations of the track system under the traction conditions are mainly caused by the impacts generated from the gear-rack engagement,which are then transferred to the sleepers,the rails,and the ballast beds.Furthermore,both the maximum stress on the racks and the wheel-rail forces measured on the rails remain below their allowable values.This experimental study evaluates the load characteristics and reveals the vibration characteristics of the rack railway track system under the vehicle’s ultimate load,which is very important for the load-strengthening design of the key components such as racks and the vibration and noise reduction of the track system.
基金supported by the Science and Technology Research and Development Program Project of China Railway Group Limited (Grant No.2022-Major-17)the National Natural Science Foundation of China (Grant Nos.52578619,52178180)+2 种基金the National Key Research and Development Program of China (Grant No.2022YFC3004304)the Frontier Cross Research Project of Central South University (Grant No.2023QYJC006)the Natural Science Foundation of Hunan Province Funding Project (Grant No.2023JJ40724)。
文摘Under earthquake action, different site conditions have a notable impact on the dynamic response of high-speed railway bridges after earthquakes, which in turn poses a threat to the running stability of trains in the post-earthquake period. Therefore, establishing a calculation method for the post-earthquake train speed threshold that considers the influence of different site characteristics is of great engineering significance. Taking the CRTS Ⅲ slab track as the research object, this study is based on the track irregularity root mean square rate(TRR), which the authors proposed earlier to quantify the track regularity level. Using the nonlinear least squares fitting method, the mapping relationship between the TRR and the postearthquake train running performance indicators on bridges is established. Furthermore, the influence of laws governing site categories and train speeds on post-earthquake train running performance on bridges is analyzed, and a train speed threshold for bridges based on running performance under random site conditions is proposed. The research results indicate that all train running performance indicators increase significantly with the increase of train operating speed;different site categories have a significant impact on post-earthquake track residual deformation and train running stability. The greater the amplitude of postearthquake track alignment residual deformation, the lower the threshold for the stable running speed of trains after the earthquake, with the speed threshold decreasing by up to 20%. The research outcomes can provide technical references for the post-earthquake safe operation and maintenance of high-speed railway bridges under complex site conditions, as well as the formulation of targeted train speed control schemes.
文摘In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary conditions on the flat bottom.Assuming“Reynolds roughness regime”,in which the thickness of the domain is very small compared to the wavelength of the roughness(i.e.a very slight roughness),we rigorously derive a generalized Reynolds equation for pressure,clearly showing the roughness-induced effects.Moreover,we give expressions for the average velocity and microrotation.
文摘The main purpose of using geothermal energy piles(GEPs)is to enable the exploitation of geothermal energy for meeting the heating/cooling demands of buildings efficiently.However,the installation process of conventional GEPs is inconvenient compared with that of traditional foundation piles.The pre-bored grouted planted geothermal energy pile(PGP GEP)is an innovative technology to simplify the installation process.Most investigations of in-situ experiments for conventional GEPs have focused on summer conditions.An in-situ test for a PGP GEP was conducted to analyze the temperature changes and thermo-mechanical characteristics under winter conditions.The results show that the average temperature of the pile decreased by 5.1℃,and the pile exhibited a general trend of high temperatures at both ends and low temperatures in the middle.In mechanics,strong pile end restraints resulted in smaller observed axial strain and higher axial thermal-induced force in the pile ends than at the middle of the pile.
基金supported by the National Natural Science Foundation of China Funded Project(Project Name:Research on Robust Adaptive Allocation Mechanism of Human Machine Co-Driving System Based on NMS Features,Project Approval Number:52172381).
文摘To address the issue of scarce labeled samples and operational condition variations that degrade the accuracy of fault diagnosis models in variable-condition gearbox fault diagnosis,this paper proposes a semi-supervised masked contrastive learning and domain adaptation(SSMCL-DA)method for gearbox fault diagnosis under variable conditions.Initially,during the unsupervised pre-training phase,a dual signal augmentation strategy is devised,which simultaneously applies random masking in the time domain and random scaling in the frequency domain to unlabeled samples,thereby constructing more challenging positive sample pairs to guide the encoder in learning intrinsic features robust to condition variations.Subsequently,a ConvNeXt-Transformer hybrid architecture is employed,integrating the superior local detail modeling capacity of ConvNeXt with the robust global perception capability of Transformer to enhance feature extraction in complex scenarios.Thereafter,a contrastive learning model is constructed with the optimization objective of maximizing feature similarity across different masked instances of the same sample,enabling the extraction of consistent features from multiple masked perspectives and reducing reliance on labeled data.In the final supervised fine-tuning phase,a multi-scale attention mechanism is incorporated for feature rectification,and a domain adaptation module combining Local Maximum Mean Discrepancy(LMMD)with adversarial learning is proposed.This module embodies a dual mechanism:LMMD facilitates fine-grained class-conditional alignment,compelling features of identical fault classes to converge across varying conditions,while the domain discriminator utilizes adversarial training to guide the feature extractor toward learning domain-invariant features.Working in concert,they markedly diminish feature distribution discrepancies induced by changes in load,rotational speed,and other factors,thereby boosting the model’s adaptability to cross-condition scenarios.Experimental evaluations on the WT planetary gearbox dataset and the Case Western Reserve University(CWRU)bearing dataset demonstrate that the SSMCL-DA model effectively identifies multiple fault classes in gearboxes,with diagnostic performance substantially surpassing that of conventional methods.Under cross-condition scenarios,the model attains fault diagnosis accuracies of 99.21%for the WT planetary gearbox and 99.86%for the bearings,respectively.Furthermore,the model exhibits stable generalization capability in cross-device settings.
文摘BEIJING,Feb.25(Xinhua)-In a territory more than twice the size of the European Union and where per capita GDP varies up to fourfold across provincia level regions,the challenge of modernizing China with the right solutions for diverse localities has become a test of governance wisdom.
基金Chongqing Light Alloy Materials and Processing Engineering Technology Research Center Open Fund Project(GCZX201903)Yunnan Province Major Science and Technology Special Project Plan(202302AA310038)Sichuan University-Suining Municipal-University Cooperation Project(2023CDSN-12)。
文摘Ti(C,N)-Mo_(2)C-Ni cermet as alternative materials was explored for use in alkaline conditions,replacing the WC-Co cemented carbides,since Co is classified as a potentially carcinogenic substance and there is potential hazard of“hard metal disease”under the exposure to cobalt dust.The changes in microstructure,corrosion rate and volumetric loss rate of the two materials were compared under electrochemical corrosion and erosion-corrosion in alkaline environment.The results demonstrates that Ti(C,N)-Mo_(2)C-Ni cermet undergoes passivation when exposed to electrochemical corrosion of NaOH solution,resulting in a significant increase in oxygen content on the corroded surface.The corrosion rate of cermet is approximately one order of magnitude lower than that of the cemented carbide.Under the erosion-corrosion of an alkaline sand-water mixture,both the cermet and cemented carbide experience a gradual increase in volumetric loss rate with prolonging the erosion time.During erosion,the rim phase in cermet is fragile,so cracks easily penetrate it while the core phase remains intact.The medium-grained cemented carbide commonly demonstrates transgranular fracture mode,while in the fine-grained cemented carbide,cracks tend to propagate along phase boundaries.The erosive wear and damage caused by sand particles play a predominant role in the erosion-corrosion process of alkaline sand-water mixtures.This process represents an accelerated destructive phenomenon influenced and intensified by the combined effects of corrosion and erosion.It is confirmed that using cermet as an alternative anti-wear material to cemented carbides is feasible under alkaline conditions,and even better.
基金support by the National Natural Science Foundation of China(Grant No.52402520)。
文摘Actuator faults can be critical in turbofan engines as they can lead to stall,surge,loss of thrust and failure of speed control.Thus,fault diagnosis of gas turbine actuators has attracted considerable attention,from both academia and industry.However,the extensive literature that exists on this topic does not address identifying the severity of actuator faults and focuses mainly on actuator fault detection and isolation.In addition,previous studies of actuator fault identification have not dealt with multiple concurrent faults in real time,especially when these are accompanied by sudden failures under dynamic conditions.This study develops component-level models for fault identification in four typical actuators used in high-bypass ratio turbofan engines under both dynamic and steady-state conditions and these are then integrated with the engine performance model developed by the authors.The research results reported here present a novel method of quantifying actuator faults using dynamic effect compensation.The maximum error for each actuator is less than0.06%and 0.07%,with average computational time of less than 0.0058 s and 0.0086 s for steady-state and transient cases,respectively.These results confirm that the proposed method can accurately and efficiently identify concurrent actuator fault for an engine operating under either transient or steady-state conditions,even in the case of a sudden malfunction.The research results emonstrate the potential benefit to emergency response capabilities by introducing this method of monitoring the health of aero engines.
基金funding support from the National Natural Science Foundation of China(Grant No.12172019).
文摘In cold regions,rock structures will be weakened by freeze-thaw cycles under various water immersion conditions.Determining how water immersion conditions impact rock deterioration under freeze-thaw cycles is critical to assess accurately the frost resistance of engineered rock.In this paper,freeze-thaw cycles(temperature range of-20℃-20℃)were performed on the sandstones in different water immersion conditions(fully,partially and non-immersed in water).Then,computed tomography(CT)tests were conducted on the sandstones when the freeze-thaw number reached 0,5,10,15,20 and 30.Next,the effects of water immersion conditions on the microstructure deterioration of sandstone under freezethaw cycles were evaluated using CT spatial imaging,porosity and damage factor.Finally,focusing on the partially immersed condition,the immersion volume rate was defined to understand the effects of immersion degree on the freeze-thaw damage of sandstone and to propose a damage model considering the freeze-thaw number and immersion degree.The results show that with increasing freeze-thaw number,the porosities and damage factors under fully and partially immersed conditions increase continuously,while those under non-immersed condition first increase and then remain approximately constant.The most severe freeze-thaw damage occurs in fully immersed condition,followed by partially immersed condition and finally non-immersed condition.Interestingly,the freeze-thaw number and the immersion volume rate both impact the microstructure deterioration of the partially immersed sandstone.For the same freeze-thaw number,the damage factor increases approximately linearly with increasing immersion volume rate,and the increasing immersion degree exacerbates the microstructure deterioration of sandstone.Moreover,the proposed model can effectively estimate the freeze-thaw damage of partially immersed sandstone with different immersion volume rates.
基金supported by the National Key Research and Development Program of China(No.2019YFC1803501)the National Natural Science Foundation of China(No.52074357)+2 种基金the Natural Science Foundation of Hunan Province,China(No.2022JJ30713)the Vanadium Titanium Union Foundationthe Project of Technology Innovation Center for Comprehensive Utilization of Strategic Mineral Resources,Ministry of Natural Resources,China。
文摘The potential of 2-amino-1-propanol(AP)as a novel depressant in selectively floating ilmenite from titanaugite under weakly acidic conditions was investigated.Micro-flotation results show that AP significantly reduces the recovery of titanaugite while having no evident impact on ilmenite flotation.Subsequent bench-scale flotation tests further confirm a remarkable improvement in separation efficiency upon the introduction of AP.Contact angle and adsorption tests reveal a stronger affinity of AP towards the titanaugite surface in comparison to ilmenite.Zeta potential measurements and X-ray photoelectron spectroscopy(XPS)analyses exhibit favorable adsorption characteristics of AP on titanaugite,resulting from a synergy of electrostatic attraction and chemical interaction.In contrast,electrostatic repulsion hinders any significant interaction between AP and the ilmenite surface.These findings highlight the potential of AP as a highly efficient depressant for ilmenite flotation,paving the way for reduced reliance on sulfuric acid in the industry.
文摘Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrained(CU)and drained(CD)triaxial testing elucidated the impact of strain rate(0.005–0.3 mm/min)on strength envelopes,deformation moduli,pore pressures,and dilatancy characteristics of unsaturated and quasi-saturated loess.Under drained conditions with a controlled matric suction of 50 kPa,increasing strain rates from 0.005 mm/min to 0.011 mm/min induced decreases in failure deviatoric stress(qf),initial deformation modulus(Ei),and cohesion(c),while friction angles remained unaffected.Specimens displayed initial contractive volumetric strains transitioning to dilation across varying confining pressures.Higher rates diminished contractive volumetric strains and drainage volumes,indicating reduced densification and strength in the shear zone.Under undrained conditions,both unsaturated and quasi-saturated(pore pressure coefficient B=0.75)loess exhibited deteriorating mechanical properties with increasing rates from 0.03 mm/min to 0.3 mm/min.For unsaturated loess,reduced contractive volumetric strains at higher rates manifested relatively looser structures in the pre-peak stress phase.The strength decrement in quasi-saturated loess arose from elevated excess porewater pressures diminishing effective stresses.Negative porewater pressures emerged in quasi-saturated loess at lower confining pressures and strain rates.Compared to previous studies,the qf and Ei exhibited rate sensitivity below threshold values before attaining minima with marginal subsequent influence.The underlying mechanism mirrors the transition from creep to accelerated deformation phase of landslides.
基金granted by the Xinjiang Geological Exploration Fund。
文摘The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it is of great scientific significance to study the accumulation conditions of oil sand in different strata and mining areas of the Junggar Basin.Through a large number of field investigations,drilling verification and sampling tests,it is found that the oil sand in the region covers an area of 2000 km^(2),with shallow and thick reservoir,and predicted resource of 180 million tons.The oil sand resources are mainly distributed in four geological strata,namely the Middle Triassic Karamay Formation,Early Jurassic Badaowan Formation,Late Jurassic Qigu Formation,and Early Cretaceous Qingshuihe Formation.The reservoir is mainly composed of sandstone with high porosity and permeability,and the reservoir space is mainly intergranular pores with a medium average oil content.The oil sand deposit in the region is a typical destructive oil reservoir.The crude oil in the oil sand layer is degraded and thickened from the deep to the shallow,the content of saturated hydrocarbon decreased,and the content of aromatic hydrocarbon,non-hydrocarbon and asphaltene increased.The oil source comes from the deep Permian hydrocarbon-generating depression.Unconformities,faults and marginal fan delta-braided river depositional systems constitute effective migration and storage systems.Caprocks of the Upper Triassic Baijiantan Formation,Lower Jurassic Sangonghe Formation and Lower Cretaceous Hutubihe Formation were formed by three large scale lake transgressions.The Indosinian,Yanshan and Late Yanshan movements are the main driving forces for the migration of deep oil and gas to the shallow edge to form oil sand deposits.It is considered that the oil sand in the northwestern margin of Junggar Basin is of a slope complex migration type.
基金supported by the National Natural Science Foundation of China (22379038)Science Research Project of Hebei Education Department (JZX2024015)+4 种基金Shijiazhuang Science and Technology Plan Project (241791357A)Central Guidance for Local Science and Technology Development Funds Project (246Z4408G)Excellent Youth Research Innovation Team of Hebei University (QNTD202410)High-level Talents Research Start-Up Project of Hebei University (521100224223)Hebei Province Innovation Capability Enhancement Plan Project (22567620H)。
文摘Rechargeable zinc(Zn)-ion batteries(RZIBs) with hydrogel electrolytes(HEs) have gained significant attention in the last decade owing to their high safety, low cost, sufficient material abundance, and superb environmental friendliness, which is extremely important for wearable energy storage applications. Given that HEs play a critical role in building flexible RZIBs, it is urgent to summarize the recent advances in this field and elucidate the design principles of HEs for practical applications. This review systematically presents the development history, recent advances in the material fundamentals, functional designs, challenges, and prospects of the HEs-based RZIBs. Firstly, the fundamentals, species, and flexible mechanisms of HEs are discussed, along with their compatibility with Zn anodes and various cathodes. Then, the functional designs of hydrogel electrolytes in harsh conditions are comprehensively discussed, including high/low/wide-temperature windows, mechanical deformations(e.g., bending, twisting, and straining), and damages(e.g., cutting, burning, and soaking). Finally, the remaining challenges and future perspectives for advancing HEs-based RZIBs are outlined.
基金supported by the Talent Fund of Beijing Jiaotong University(No.2020RC012)NSFC(No.11871295),supported by NSFC(No.11971476),supported by NSFC(No.12071421)。
文摘Let d(n;r_(1),q_(1),r_(2),q_(2))be the number of factorization n=n_(1)n_(2)satisfying n_i≡r_i(mod q_i)(i=1,2)andΔ(x;r_(1),q_(1),r_(2),q_(2))be the error term of the summatory function of d(n;r_(1),q_(1),r_(2),q_(2)).Suppose x≥(q_(1)q_(2))^(1+ε),1≤r_i≤q_i,and(r_i,q_i)=1(i=1,2).This paper studies the power moments and sign changes ofΔ(x;r_(1),q_(1),r_(2),q_(2)).We prove that for sufficiently large constant C,Δ(q_(1)q_(2)x:r_(1),q_(1),r_(2),q_(2))changes sign in the interval[T,T+C√T]for any large T.Meanwhile,we show that for small constants c and c,there exist infinitely many subintervals of length c√log^(-7)T in[T,2T]where±Δ(q_(1)q_(2)x:r_(1),q_(1),r_(2),q_(2))>cx^(1/4)always holds.
文摘ZnO is a highly significant II-VI semiconductor known for its excellent optoelectronic properties,making it widely applicable and promising for use in light-emitting devices,solar cells,lasers,and photodetectors.The methods for preparing ZnO are diverse,and among them,the hydrothermal method is favored for its simplicity,ease of operation,and low cost,making it an optimal choice for ZnO single-crystal growth.Most studies investigating the effects of different hydrothermal experimental parameters on the morphology and performance of ZnO nano-materials typically focus on only 2—3 variable parameters,with few examining the impact of all possible experimental parameter changes on ZnO nano-mate-rials.The principles of the hydrothermal method and its advantages in nano-material preparation were briefly introduced in this article.The detailed discussion on the influence of various experimental parameters on the preparation of ZnO nano-materials was provided,which including reaction materials,Zn^(2+)/OH^(-)ratio,reaction time and temperature,additives,experimental equipment,and annealing conditions.The review co-vers how different experimental parameters affect the morphology and performance of the materials,as well as how different rare earth doping elements influence the performance of ZnO nano-materials.It is hoped that this work will contribute to future research on the hydrothermal synthesis of nano-materials.
基金Supported by the National Natural Science Foundation of China(U22B6004)Project of PetroChina Research Institute of Petroleum Exploration and Development(2022yjcq03)Core Technology Key Project of China Petroleum Changqing Oilfield Company(KJZX2023-01).
文摘In addition to the organic matter type,abundance,thermal maturity,and shale reservoir space,the preservation conditions of source rocks play a key factor in affecting the quantity and quality of retained hydrocarbons in source rocks of lacustrine shale,yet this aspect has received little attention.This paper,based on the case analysis,explores how preservation conditions influence the enrichment of mobile hydrocarbons in shale oil.Research showns that good preservation conditions play three key roles.(1)Ensure the retention of sufficient light hydrocarbons(C_(1)–C_(13)),medium hydrocarbons(C_(14)–C_(25))and small molecular aromatics(including 1–2 benzene rings)in the formation,which enhances the fluidity and flow of shale oil;(2)Maintain a high energy field(abnormally high pressure),thus facilitating the maximum outflow of shale oil;(3)Ensure that the retained hydrocarbons have the miscible flow condition of multi-component hydrocarbons(light hydrocarbons,medium hydrocarbons,heavy hydrocarbons,and heteroatomic compounds),so that the heavy hydrocarbons(C_(25+))and heavy components(non-hydrocarbons and asphaltenes)have improved fluidity and maximum flow capacity.In conclusion,in addition to the advantages of organic matter type,abundance,thermal maturity,and reservoir space,good preservation conditions of shale layers are essential for the formation of economically viable shale oil reservoirs,which should be incorporated into the evaluation criteria of shale oil-rich areas/segments and considered a necessary factor when selecting favorable exploration targets.
基金support by “R&D Program for Forest Science Technology(RS-2024-0040 3460)” provided by Korea Forest Service(Korea Forestry Promotion Institute)
文摘Dear Editor,H_(∞)This letter develops a new framework for the robust stability and performance conditions as well as the relevant controller synthesis with respect to uncertain robot manipulators.There often exist model uncertainties between the nominal model and the real robot manipulator and disturbances. Hence, dealing with their effects plays a crucial role in leading to high tracking performances, as discussed in [1]–[5].
文摘Based on the environmental conditions for the growth and development of potatoes,the impact of climatic conditions on potato cultivation in Shangdu County was analyzed.Due to significant fluctuations in temperature during the seedling stage of potatoes,less precipitation,and uneven temporal and spatial distribution of precipitation,the yield of potatoes is unstable.Therefore,scientific planting suggestions and meteorological service countermeasures were proposed.
