The effect of forging passes on the refinement of high purity aluminum during multi-forging was investigated. The attention was focused on the structure uniformity due to deformation uniformity and the grain refinemen...The effect of forging passes on the refinement of high purity aluminum during multi-forging was investigated. The attention was focused on the structure uniformity due to deformation uniformity and the grain refinement limitation with very high strains. The results show that the fine grain zone in the center of sample expands gradually with the increase of forging passes. When the forging passes reach 6, an X-shape fine grain zone is initially formed. With a further increase of the passes, this X-shape zone tends to spread the whole sample. Limitation in the structural refinement is observed with increasing strains during multi-forging process at the room temperature. The grains size in the center is refined to a certain size （110 μm as forging passes reach 12, and there is no further grain refinement in the center with increasing the forging passes to 24. However, the size of the coarse grains near the surface is continuously decreased with increasing the forging passes to 24.展开更多
This study proposes a general imperfect thermal contact model to predict the thermal contact resistance at the interface among multi-layered composite structures.Based on the Green-Lindsay(GL)thermoelastic theory,semi...This study proposes a general imperfect thermal contact model to predict the thermal contact resistance at the interface among multi-layered composite structures.Based on the Green-Lindsay(GL)thermoelastic theory,semi analytical solutions of temperature increment and displacement of multi-layered composite structures are obtained by using the Laplace transform method,upon which the effects of thermal resistance coefficient,partition coefficient,thermal conductivity ratio and heat capacity ratio on the responses are studied.The results show that the generalized imperfect thermal contact model can realistically describe the imperfect thermal contact problem.Accordingly,it may degenerate into other thermal contact models by adjusting the thermal resistance coefficient and partition coefficient.展开更多
A two-dimensional electromagnetic particle-in-cell simulation model is proposed to study the density evolution and collective stopping of electron beams in background plasmas.We show here the formation of the multi-la...A two-dimensional electromagnetic particle-in-cell simulation model is proposed to study the density evolution and collective stopping of electron beams in background plasmas.We show here the formation of the multi-layer structure of the relativistic electron beam in the plasma due to the different betatron frequency from the beam front to the beam tail.Meanwhile,the nonuniformity of the longitudinal wakefield is the essential reason for the multi-layer structure formation in beam phase space.The influences of beam parameters(beam radius and transverse density profile)on the formation of the multi-layer structure and collective stopping in background plasmas are also considered.展开更多
With the continuous improvement of China's science and technology, the design method of steel structure is also more and more, how to better apply the module building design method to the related buildings, is the...With the continuous improvement of China's science and technology, the design method of steel structure is also more and more, how to better apply the module building design method to the related buildings, is the current issue to focus on consideration. Therefore, this paper will focus on the design method of multi-layer steel structure module and steel frame composite building structure, and analyze and study its structure, so as to improve the utilization rate of steel structure and promote the development of the construction industry.展开更多
Solar energy has always been a kind of energy with large reserves and wide application.It is well utilized through solar absorbers.In our study,the finite difference time domain method(FDTD)is used to simulate the abs...Solar energy has always been a kind of energy with large reserves and wide application.It is well utilized through solar absorbers.In our study,the finite difference time domain method(FDTD)is used to simulate the absorber composed of refractory metal materials,and its absorption performance and thermal emission performance are obtained.The ultra-wide band of 200 nm-3000 nm reaches 95.93%absorption efficiency,of which the bandwidth absorption efficiency of2533 nm(200 nm-2733 nm)is greater than 90%.The absorption efficiency in the whole spectrum range(200 nm-2733 nm)is 97.17%on average.The multilayer nanodisk structure of the absorber allows it to undergo strong surface plasmon resonance and near-field coupling when irradiated by incident light.The thermal emission performance of the absorber enables it to also be applied to the thermal emitter.The thermal emission efficiency of 95.37%can be achieved at a high temperature of up to 1500 K.Moreover,the changes of polarization and incident angle do not cause significant changes in absorption.Under the gradual change of polarization angle(0°-90°),the absorption spectrum maintains a high degree of consistency.As the incident angle increases from 0°to 60°,there is still 85%absorption efficiency.The high absorption efficiency and excellent thermal radiation intensity of ultra-wideband enable it to be deeply used in energy absorption and conversion applications.展开更多
In this study,a high impact resistant multi-layered composite consisting of continuous carbon fibre/nylon(CCF)and short carbon fibre/nylon(SCF)layers is developed via 3D printing technology.The effect of CCF/SCF layer...In this study,a high impact resistant multi-layered composite consisting of continuous carbon fibre/nylon(CCF)and short carbon fibre/nylon(SCF)layers is developed via 3D printing technology.The effect of CCF/SCF layers configuration on the impact resistance is investigated by low-velocity impact test,and the impact failure mechanism of the 3D printed composites is explored by microscopic observations and finite element(FE)simulation analysis.The results show that the 3D printed multi-layered composite with SCF layers distributed in the middle(HFA)exhibits higher impact resistant performance than the specimens with alternating SCF/CCF layers(HFB)and CCF layers distributed in the middle(HFC).The effect of CCF/SCF layers proportion on the impact performance is also studied by FE simulation,and the results show that the specimen with a CCF/SCF proportion of 7.0 exhibits the highest impact strength.展开更多
Various nanostructured architectures have been demonstrated to be effective to address the issues of high capacity Si anodes. However, the scale-up of these nano-Si materials is still a critical obstacle for commercia...Various nanostructured architectures have been demonstrated to be effective to address the issues of high capacity Si anodes. However, the scale-up of these nano-Si materials is still a critical obstacle for commercialization. Herein, we use industrial ferrosilicon as low-cost Si source and introduce a facile and scalable method to fabricate a micrometer-sized ferrosilicon/C composite anode, in which ferrosilicon microparticles are wrapped with multi-layered carbon nanosheets. The multi-layered carbon nanosheets could effectively buffer the volume variation of Si as well as create an abundant and reliable conductivity framework, ensuring fast transport of electrons. As a result, the micrometer-sized ferrosilicon/C anode achieves a stable cycling with 805.9 m Ah g-1 over 200 cycles at 500 mA g-1 and a good rate capability of455.6 mAh g-1 at 10 A g-1. Therefore, our approach based on ferrosilicon provides a new opportunity in fabricating cost-effective, pollution-free, and large-scale Si electrode materials for high energy lithium-ion batteries.展开更多
Glass fibre-reinforced(GFR)structure is extensively used in radome,spoiler and some other equipment.In engineering practice,due to the influence of wear,aging,impact,chemical corrosion of surface structure and other f...Glass fibre-reinforced(GFR)structure is extensively used in radome,spoiler and some other equipment.In engineering practice,due to the influence of wear,aging,impact,chemical corrosion of surface structure and other factors,the internal structure of this kind of structure gradually evolves into a defect state and expands to form defects such as bubbles,scratches,shorts,cracks,cavitation erosion,stains and other defects.These defects have posed a serious threat to the quality and performance of GFR structure.From the propagation process of GFR structure defects,its duration is random and may be very short.Therefore,designing a scientific micro defect intelligent detection system for GFR structure to enhance the maintainability of GFR structure will not only help to reduce emergencies,but also have positive theoretical significance and application value to ensure safe production and operation.Firstly,the defect detection mechanism of GFR structure is discussed,and the defect detection principle and defect area identification method are analyzed.Secondly,the processing process of defect edge signal is discussed,a classifier based on MLP is established,and the algorithm of the classifier is designed.Finally,the effectiveness of this method is proved by real-time monitoring and defect diagnosis of a typical GFR structure.The experimental results show that this method improves the efficiency of defect detection and has high defect feature recognition accuracy,which provides a new idea for the on-line detection of GFR structure defects.展开更多
Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness...Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.展开更多
A simple model for approximate bandgap structure calculation of all-solid photonic bandgap fibre based on an array of rings is proposed. In this model calculated are only the potential modes of a unit cell, which is a...A simple model for approximate bandgap structure calculation of all-solid photonic bandgap fibre based on an array of rings is proposed. In this model calculated are only the potential modes of a unit cell, which is a high-index ring in the low-index background for this fibre, rather than the whole cladding periodic structure based on Bloch＇s theorem to find the bandgap. Its accuracy is proved by comparing its results with the results obtained by using the accurate full-vector plane-wave method. High speed in computation is its great advantage over the other exact methods, because it only needs to find the roots of one-dimensional analytical expressions. And the results of this model, mode plots, offer an ideal environment to explore the basic properties of photonie bandgap clearly.展开更多
The Sichuan Basin represents the earliest area where natural gas is explored,developed and comprehensively utilized in China.After over 50 years of oil and gas exploration,oil and gas reservoirs have been discovered i...The Sichuan Basin represents the earliest area where natural gas is explored,developed and comprehensively utilized in China.After over 50 years of oil and gas exploration,oil and gas reservoirs have been discovered in 24 gas-dominant layers in this basin.For the purpose of predicting natural gas exploration direction and target of each layer in the Sichuan Basin,the sedimentary characteristics of marine and continental strata in this basin were summarized and the forms of multi-cycled tectonic movement and their controlling effect on sedimentation,diagenesis and hydrocarbon accumulation were analyzed.Based on the analysis,the following characteristics were identified.First,the Sichuan Basin has experienced the transformation from marine sedimentation to continental sedimentation since the Sinian with the former being dominant.Second,multiple sourceereservoir assemblages are formed based on multi-rhythmed deposition,and multi-layered reservoir hydrocarbon accumulation characteristics are vertically presented.And third,multi-cycled tectonic movement appears in many forms and has a significant controlling effect on sedimentation,diagenesis and hydrocarbon accumulation.Then,oil and gas reservoir characteristics and enrichment laws were investigated.It is indicated that the Sichuan Basin is characterized by coexistence of conventional and unconventional oil and gas reservoirs,multi-layered reservoir hydrocarbon supply,multiple reservoir types,multiple trap types,multi-staged hydrocarbon accumulation and multiple hydrocarbon accumulation models.Besides,its natural gas enrichment is affected by hydrocarbon source intensity,large paleo-uplift,favorable sedimentary facies belt,sedimentaryestructural discontinuity plane and structural fracture development.Finally,the natural gas exploration and research targets of each layer in the Sichuan Basin were predicted according to the basic petroleum geologic conditions,enrichment laws and exploration status.展开更多
Significant exploration progress has been made in ultra-deep clastic rocks in the Kuqa Depression,Tarim Basin,over recent years.A new round of comprehensive geological research has formed four new understandings:(1)Es...Significant exploration progress has been made in ultra-deep clastic rocks in the Kuqa Depression,Tarim Basin,over recent years.A new round of comprehensive geological research has formed four new understandings:(1)Establish structural model consisting of multi-detachment composite,multi-stage structural superposition and multi-layer deformation.Multi-stage structural traps are overlapped vertically,and a series of structural traps are discovered in underlying ultra-deep layers.(2)Five sets of high-quality large-scale source rocks of three types of organic phases are developed in the Triassic and Jurassic systems,and forming a good combination of source-reservoir-cap rocks in ultra-deep layers with three sets of large-scale regional reservoir and cap rocks.(3)The formation of large oil and gas fields is controlled by four factors which are source,reservoir,cap rocks and fault.Based on the spatial configuration relationship of these four factors,a new three-dimensional reservoir formation model for ultra-deep clastic rocks in the Kuqa Depression has been established.(4)The next key exploration fields for ultra-deep clastic rocks in the Kuqa Depression include conventional and unconventional oil and gas.The conventional oil and gas fields include the deep multi-layer oil-gas accumulation zone in Kelasu,tight sandstone gas of Jurassic Ahe Formation in the northern structural zone,multi-target layer lithological oil and gas reservoirs in Zhongqiu–Dina structural zone,lithologic-stratigraphic and buried hill composite reservoirs in south slope and other favorable areas.Unconventional oil and gas fields include deep coal rock gas of Jurassic Kezilenuer and Yangxia formations,Triassic Tariqike Formation and Middle-Lower Jurassic and Upper Triassic continental shale gas.The achievements have important reference significance for enriching the theory of ultra-deep clastic rock oil and gas exploration and guiding the future oil and gas exploration deployment.展开更多
Magnesium cylindrical parts have relatively poor mechanical properties and distinct anisotropy of microstructure,which hinder their application as structural components.To improve the performance of WE71 cylindrical p...Magnesium cylindrical parts have relatively poor mechanical properties and distinct anisotropy of microstructure,which hinder their application as structural components.To improve the performance of WE71 cylindrical parts,multi-direction forging(MDF)was introduced before back extrusion,and the microstructure and mechanical properties were investigated.Results of microstructure show that the grain size in the outer of the cylindrical bottom is refined from 30.1 to 27.7μm,the micro structure is more uniform and the dislocation density is higher.The bimodal grain structure is formed in the outer of the cylindrical wall,which is ascribed to the formation of MgsRE phases along grain boundaries.These phases result in the Zener pinning effect on grain boundaries and the reduction of DRX volume fraction.The texture type of the cylindrical bottom is<0001>‖ED and the cylindrical wall is<1010>‖ED,and the maximum pole intensity is 1.986 and 1.664,respectively.Results of the tensile test at room temperature show that combined improved strength and ductility of the cylindrical part is attained after introducing the MDF process.The ultimate tensile strength(UTS),yield strength(YS)and elongation are279 MPa,185 MPa and 12%at the bottom and 299 MPa,212 MPa and 20%at the wall.展开更多
Detachment structures occur widely in the crust, and it is the commonest and most important deformation type developed in the region between orogenic belts and basins. The ＇comb-like＇ and ＇toughlike＇ fold belts in...Detachment structures occur widely in the crust, and it is the commonest and most important deformation type developed in the region between orogenic belts and basins. The ＇comb-like＇ and ＇toughlike＇ fold belts in eastern Sichuan are caused by multi-layer detachment. The duplex structure is the most important deformation style in the region, exhibiting different characteristics from typical detachment structures. Different deformation styles, scales, and shortenings resulting from independent deformations of various detachment systems would lead to the phenomenon whereby most of the topographical heights in the region do not correspond to the structural heights in depth. Based on systematic structural analysis and combined with practical oil/gas prospecting, four types of structural traps are described from eastern Sichuan Province, which are： detachment and thrust trap; detachment folding trap; fault-flat blocking trap; and detachment layer trap. Meticulous studies on the deformation and distribution of detachment layers in the eastern Sichuan Province will contribute to oil/gas prospecting and selection of potential regions of marine-origin oil/gas prospecting in South China.展开更多
Heat conduction in multi-layer and composite materials is one of the fundamental heat transfer problems in many industrial applications.Due to different materials types,interface conditions,and various geometries of t...Heat conduction in multi-layer and composite materials is one of the fundamental heat transfer problems in many industrial applications.Due to different materials types,interface conditions,and various geometries of these laminates,the heat conduction mechanism is more complicated than that of one-layer isotropic media.Analytical solutions are the best ways to study and understand such problems in depth.In this study,different existing analytical solutions for heat conduction in multi-layer and composite materials are reviewed and classified in rectangular,cylindrical,spherical,and conical coordinates.Applied boundary conditions,internal heat source,and thermal contact resistance as the most critical parameters in the solution complexity investigated in the literature,are discussed and summarized in different tables.Various types of multi-layer structures such as isotropic,anisotropic,orthotropic,and reinforced laminates are included in this study.It is found that although more than half a century has passed since the beginning of the research on heat transfer in multi-layer composites,new researches that can help with a better understanding in this area are still being offered.The challenges and shortcomings in this area are also discussed to guide future researches.展开更多
A better understanding of the mechanical behavior of the multilayered structure under extermal loading is the most important item for the structural design and the risk asssment.The objective of this study are to prop...A better understanding of the mechanical behavior of the multilayered structure under extermal loading is the most important item for the structural design and the risk asssment.The objective of this study are to propose and develop an analytical solution for the mechanical behaviors of multi-layered structure generated by axisy mmetric loading,and to investigate the impact of anisotropic layers and interlayer conditions on the multi-layered structure.To reach these objectives,first,according to the goveming equations,the analytical solution for a single layer was formulated by adopting the spatial Hankel transform.Then the global matrix technique is applied to achieve the analytical solution of multi-layered structure in Hankel domain.The sliding and bonded interlayer conditions were considered in this process.Finally,the numerical inversion of integral transform was used to solve the components of displacement and stress in real domain.Gauss-Lcgendre quadrature is a key scheme in the numerical inversion process.Moreover,following by the verification of the proposed analytical solution,one typical three-layered flexible pavement was applied as the computing carrier of numerical analysis for the multi-layered structure.The results have shown that the anisotropic layers and the interlayer conditions significantly affect the mechanical behaviors of the proposed structure.展开更多
Developing porous self-supporting electrodes with excellent conductivity,good mechanical properties,and high electrochemical activity is crucial for constructing electrode materials with lightweight,ultra-thin,flexibl...Developing porous self-supporting electrodes with excellent conductivity,good mechanical properties,and high electrochemical activity is crucial for constructing electrode materials with lightweight,ultra-thin,flexible,and high capacitance performance.In this work,we prepared a cellulose nanofibers(CNFs)/carbon nanotubes(CNTs)/vinasse activated carbon(VAC)(CCV)composite material with a multi-layer hierarchical conductive structure through simple vacuum filtration and freeze-drying.In this composite material,the self-assembly of CNF provides the main skeleton structure of a multi-layer hierarchical structure.CNT provides a fast path for the rapid transfer of electrons and is beneficial for the loss of electromagnetic waves.VAC provides sufficient double layer performance.The synergistic effect of the above three endows CCV composite materials with excellent energy storage performance and electromagnetic interference(EMI)shielding performance.In addition,we endowed the CCV composite with a certain shape and performance by introducing a vitrimer polymer with a dynamic cross-linked network structure.In summary,thanks to the synergistic effect of various components in the multi-layer hierarchical structure,CCV composite materials exhibit excellent integration performance,especially stable energy storage performance and EMI shielding performance.These significant properties make CCV composite materials have great application prospects in the fields of energy storage and intelligent EMI shielding.展开更多
Droplet transport still faces numerous challenges,such as a limited transport distance,large volume loss,and liquid contamination.Inspired by the principle of‘synergistic biomimetics’,we propose a design for a platf...Droplet transport still faces numerous challenges,such as a limited transport distance,large volume loss,and liquid contamination.Inspired by the principle of‘synergistic biomimetics’,we propose a design for a platform that enables droplets to be self-propelled.The orchid leaf-like three-dimensional driving structure provides driving forces for the liquid droplets,whereas the lotus leaf-like superhydrophobic surface prevents liquid adhesion,and the bamboo-like nodes enable long-distance transport.During droplet transport,no external energy input is required,no fluid adhesion or residue is induced,and no contamination or mass loss of the fluid is caused.We explore the influence of various types and parameters of wedge structures on droplet transportation,the deceleration of droplet speed at nodal points,and the distribution of internal pressure.The results indicate that the transport platform exhibits insensitivity to pH value and temperature.It allows droplets to be transported with varying curvatures in a spatial environment,making it applicable in tasks like target collection,as well as load,fused,anti-gravity,and long-distance transport.The maximum droplet transport speed reached(58±5)mm·s^(−1),whereas the transport distance extended to(136±4)mm.The developed platform holds significant application prospects in the fields of biomedicine and chemistry,such as high-throughput screening of drugs,genomic bioanalysis,microfluidic chip technology for drug delivery,and analysis of biological samples.展开更多
Despite dedicated effort for many decades,statistical description of highly technologically important wall turbulence remains a great challenge.Current models are unfortunately incomplete,or empirical,or qualitative.A...Despite dedicated effort for many decades,statistical description of highly technologically important wall turbulence remains a great challenge.Current models are unfortunately incomplete,or empirical,or qualitative.After a review of the existing theories of wall turbulence,we present a new framework,called the structure ensemble dynamics （SED）,which aims at integrating the turbulence dynamics into a quantitative description of the mean flow.The SED theory naturally evolves from a statistical physics understanding of non-equilibrium open systems,such as fluid turbulence, for which mean quantities are intimately coupled with the fluctuation dynamics.Starting from the ensemble-averaged Navier-Stokes（EANS） equations,the theory postulates the existence of a finite number of statistical states yielding a multi-layer picture for wall turbulence.Then,it uses order functions（ratios of terms in the mean momentum as well as energy equations） to characterize the states and transitions between states.Application of the SED analysis to an incompressible channel flow and a compressible turbulent boundary layer shows that the order functions successfully reveal the multi-layer structure for wall-bounded turbulence, which arises as a quantitative extension of the traditional view in terms of sub-layer,buffer layer,log layer and wake. Furthermore,an idea of using a set of hyperbolic functions for modeling transitions between layers is proposed for a quantitative model of order functions across the entire flow domain.We conclude that the SED provides a theoretical framework for expressing the yet-unknown effects of fluctuation structures on the mean quantities,and offers new methods to analyze experimental and simulation data.Combined with asymptotic analysis,it also offers a way to evaluate convergence of simulations.The SED approach successfully describes the dynamics at both momentum and energy levels, in contrast with all prevalent approaches describing the mean velocity profile only.Moreover,the SED theoretical framework is general,independent of the flow system to study, while the actual functional form of the order functions may vary from flow to flow.We assert that as the knowledge of order functions is accumulated and as more flows are analyzed, new principles（such as hierarchy,symmetry,group invariance,etc.） governing the role of turbulent structures in the mean flow properties will be clarified and a viable theory of turbulence might emerge.展开更多
Mechanical stimuli play critical roles in cardiovascular diseases,in which in vivo stresses in blood vessels present a great challenge to predict.Based on the structural-thermal coupled finite element method,we propos...Mechanical stimuli play critical roles in cardiovascular diseases,in which in vivo stresses in blood vessels present a great challenge to predict.Based on the structural-thermal coupled finite element method,we propose a thermal expansion method to estimate stresses in multi-layer blood vessels under healthy and pathological conditions.The proposed method provides a relatively simple and convenient means to predict reliable in vivo mechanical stresses with accurate residual stress.The method is first verified with the opening-up process and the pressure-radius responses for single and multi-layer vessel models.It is then applied to study the stress variation in a human carotid artery at different hypertension stages and in a plaque of vascular stenosis.Our results show that specific or optimal residual stresses exist for different blood pressures,which helps form a homogeneous stress distribution across vessel walls.High elastic shear stress is identified on the shoulder of the plaque,which contributes to the tearing effect in plaque rupture.The present study indicates that the proposed numerical method is a capable and efficient in vivo stress evaluation of patient-specific blood vessels for clinical purposes.展开更多
基金Projects(51204053,51074048,51204048)supported by the National Natural Science Foundation of ChinaProject(20110491518)supported by China Postdoctoral Science FoundationProject(2012CB619506)supported by the National Basic Research Program of China
文摘The effect of forging passes on the refinement of high purity aluminum during multi-forging was investigated. The attention was focused on the structure uniformity due to deformation uniformity and the grain refinement limitation with very high strains. The results show that the fine grain zone in the center of sample expands gradually with the increase of forging passes. When the forging passes reach 6, an X-shape fine grain zone is initially formed. With a further increase of the passes, this X-shape zone tends to spread the whole sample. Limitation in the structural refinement is observed with increasing strains during multi-forging process at the room temperature. The grains size in the center is refined to a certain size （110 μm as forging passes reach 12, and there is no further grain refinement in the center with increasing the forging passes to 24. However, the size of the coarse grains near the surface is continuously decreased with increasing the forging passes to 24.
基金Projects(42477162,52108347,52178371,52168046,52178321,52308383)supported by the National Natural Science Foundation of ChinaProjects(2023C03143,2022C01099,2024C01219,2022C03151)supported by the Zhejiang Key Research and Development Plan,China+6 种基金Project(LQ22E080010)supported by the Exploring Youth Project of Zhejiang Natural Science Foundation,ChinaProject(LR21E080005)supported by the Outstanding Youth Project of Natural Science Foundation of Zhejiang Province,ChinaProject(2022M712964)supported by the Postdoctoral Science Foundation of ChinaProject(2023AFB008)supported by the Natural Science Foundation of Hubei Province for Youth,ChinaProject(202203)supported by Engineering Research Centre of Rock-Soil Drilling&Excavation and Protection,Ministry of Education,ChinaProject(202305-2)supported by the Science and Technology Project of Zhejiang Provincial Communication Department,ChinaProject(2021K256)supported by the Construction Research Founds of Department of Housing and Urban-Rural Development of Zhejiang Province,China。
文摘This study proposes a general imperfect thermal contact model to predict the thermal contact resistance at the interface among multi-layered composite structures.Based on the Green-Lindsay(GL)thermoelastic theory,semi analytical solutions of temperature increment and displacement of multi-layered composite structures are obtained by using the Laplace transform method,upon which the effects of thermal resistance coefficient,partition coefficient,thermal conductivity ratio and heat capacity ratio on the responses are studied.The results show that the generalized imperfect thermal contact model can realistically describe the imperfect thermal contact problem.Accordingly,it may degenerate into other thermal contact models by adjusting the thermal resistance coefficient and partition coefficient.
基金supported by National Natural Science Foundation of China(Nos.12075046 and 11775042)。
文摘A two-dimensional electromagnetic particle-in-cell simulation model is proposed to study the density evolution and collective stopping of electron beams in background plasmas.We show here the formation of the multi-layer structure of the relativistic electron beam in the plasma due to the different betatron frequency from the beam front to the beam tail.Meanwhile,the nonuniformity of the longitudinal wakefield is the essential reason for the multi-layer structure formation in beam phase space.The influences of beam parameters(beam radius and transverse density profile)on the formation of the multi-layer structure and collective stopping in background plasmas are also considered.
文摘With the continuous improvement of China's science and technology, the design method of steel structure is also more and more, how to better apply the module building design method to the related buildings, is the current issue to focus on consideration. Therefore, this paper will focus on the design method of multi-layer steel structure module and steel frame composite building structure, and analyze and study its structure, so as to improve the utilization rate of steel structure and promote the development of the construction industry.
基金support from the National Natural Science Foundation of China (Grant No.51606158,11604311,12074151)the Guangxi Science and Technology Base and Talent Special Project (Grant No.AD21075009)+6 种基金the Sichuan Science and Technology Program (Grant No.2021JDRC0022)the Natural Science Foundation of Fujian Province (Grant No.2021J05202)the Research Project of Fashu Foundation (Grant No.MFK23006)the Open Fund of the Key Laboratory for Metallurgical Equipment and Control Technology of Ministry of Education in Wuhan University of Science and Technology,China (Grant No.MECOF2022B01MECOF2023B04)the Project supported by Guangxi Key Laboratory of Precision Navigation Technology and Application,Guilin University of Electronic Technology (Grant No.DH202321)the Scientific Research Project of Huzhou College (Grant No.2022HXKM07)。
文摘Solar energy has always been a kind of energy with large reserves and wide application.It is well utilized through solar absorbers.In our study,the finite difference time domain method(FDTD)is used to simulate the absorber composed of refractory metal materials,and its absorption performance and thermal emission performance are obtained.The ultra-wide band of 200 nm-3000 nm reaches 95.93%absorption efficiency,of which the bandwidth absorption efficiency of2533 nm(200 nm-2733 nm)is greater than 90%.The absorption efficiency in the whole spectrum range(200 nm-2733 nm)is 97.17%on average.The multilayer nanodisk structure of the absorber allows it to undergo strong surface plasmon resonance and near-field coupling when irradiated by incident light.The thermal emission performance of the absorber enables it to also be applied to the thermal emitter.The thermal emission efficiency of 95.37%can be achieved at a high temperature of up to 1500 K.Moreover,the changes of polarization and incident angle do not cause significant changes in absorption.Under the gradual change of polarization angle(0°-90°),the absorption spectrum maintains a high degree of consistency.As the incident angle increases from 0°to 60°,there is still 85%absorption efficiency.The high absorption efficiency and excellent thermal radiation intensity of ultra-wideband enable it to be deeply used in energy absorption and conversion applications.
基金This work was supported by the National Science Fund for Distinguished Young Scholars(Grant No.11625210)the National Science Foundation of China(Grant No.51873153)+1 种基金the Shanghai Pujiang Program(Grant No.19PJ1410000)the Shanghai International Science and Technology Cooperation Fund Project(Grant No.19520713000).
文摘In this study,a high impact resistant multi-layered composite consisting of continuous carbon fibre/nylon(CCF)and short carbon fibre/nylon(SCF)layers is developed via 3D printing technology.The effect of CCF/SCF layers configuration on the impact resistance is investigated by low-velocity impact test,and the impact failure mechanism of the 3D printed composites is explored by microscopic observations and finite element(FE)simulation analysis.The results show that the 3D printed multi-layered composite with SCF layers distributed in the middle(HFA)exhibits higher impact resistant performance than the specimens with alternating SCF/CCF layers(HFB)and CCF layers distributed in the middle(HFC).The effect of CCF/SCF layers proportion on the impact performance is also studied by FE simulation,and the results show that the specimen with a CCF/SCF proportion of 7.0 exhibits the highest impact strength.
基金the National Natural Science Foundation of China(No:21703285)。
文摘Various nanostructured architectures have been demonstrated to be effective to address the issues of high capacity Si anodes. However, the scale-up of these nano-Si materials is still a critical obstacle for commercialization. Herein, we use industrial ferrosilicon as low-cost Si source and introduce a facile and scalable method to fabricate a micrometer-sized ferrosilicon/C composite anode, in which ferrosilicon microparticles are wrapped with multi-layered carbon nanosheets. The multi-layered carbon nanosheets could effectively buffer the volume variation of Si as well as create an abundant and reliable conductivity framework, ensuring fast transport of electrons. As a result, the micrometer-sized ferrosilicon/C anode achieves a stable cycling with 805.9 m Ah g-1 over 200 cycles at 500 mA g-1 and a good rate capability of455.6 mAh g-1 at 10 A g-1. Therefore, our approach based on ferrosilicon provides a new opportunity in fabricating cost-effective, pollution-free, and large-scale Si electrode materials for high energy lithium-ion batteries.
基金Guangdong Provincial University Key Special Project Fund(No.2020zdzx2032)National Entrepreneurship Practice Fund(No.202013684009s)。
文摘Glass fibre-reinforced(GFR)structure is extensively used in radome,spoiler and some other equipment.In engineering practice,due to the influence of wear,aging,impact,chemical corrosion of surface structure and other factors,the internal structure of this kind of structure gradually evolves into a defect state and expands to form defects such as bubbles,scratches,shorts,cracks,cavitation erosion,stains and other defects.These defects have posed a serious threat to the quality and performance of GFR structure.From the propagation process of GFR structure defects,its duration is random and may be very short.Therefore,designing a scientific micro defect intelligent detection system for GFR structure to enhance the maintainability of GFR structure will not only help to reduce emergencies,but also have positive theoretical significance and application value to ensure safe production and operation.Firstly,the defect detection mechanism of GFR structure is discussed,and the defect detection principle and defect area identification method are analyzed.Secondly,the processing process of defect edge signal is discussed,a classifier based on MLP is established,and the algorithm of the classifier is designed.Finally,the effectiveness of this method is proved by real-time monitoring and defect diagnosis of a typical GFR structure.The experimental results show that this method improves the efficiency of defect detection and has high defect feature recognition accuracy,which provides a new idea for the on-line detection of GFR structure defects.
基金Project(50071014) supported by the National Natural Science Foundation of China
文摘Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.
基金Project supported by the National High Technology Research and Development Program of China (Grant No 2004AA31G200)Beijing Jiaotong University Foundation, China (Grant No 2005SM002)
文摘A simple model for approximate bandgap structure calculation of all-solid photonic bandgap fibre based on an array of rings is proposed. In this model calculated are only the potential modes of a unit cell, which is a high-index ring in the low-index background for this fibre, rather than the whole cladding periodic structure based on Bloch＇s theorem to find the bandgap. Its accuracy is proved by comparing its results with the results obtained by using the accurate full-vector plane-wave method. High speed in computation is its great advantage over the other exact methods, because it only needs to find the roots of one-dimensional analytical expressions. And the results of this model, mode plots, offer an ideal environment to explore the basic properties of photonie bandgap clearly.
文摘The Sichuan Basin represents the earliest area where natural gas is explored,developed and comprehensively utilized in China.After over 50 years of oil and gas exploration,oil and gas reservoirs have been discovered in 24 gas-dominant layers in this basin.For the purpose of predicting natural gas exploration direction and target of each layer in the Sichuan Basin,the sedimentary characteristics of marine and continental strata in this basin were summarized and the forms of multi-cycled tectonic movement and their controlling effect on sedimentation,diagenesis and hydrocarbon accumulation were analyzed.Based on the analysis,the following characteristics were identified.First,the Sichuan Basin has experienced the transformation from marine sedimentation to continental sedimentation since the Sinian with the former being dominant.Second,multiple sourceereservoir assemblages are formed based on multi-rhythmed deposition,and multi-layered reservoir hydrocarbon accumulation characteristics are vertically presented.And third,multi-cycled tectonic movement appears in many forms and has a significant controlling effect on sedimentation,diagenesis and hydrocarbon accumulation.Then,oil and gas reservoir characteristics and enrichment laws were investigated.It is indicated that the Sichuan Basin is characterized by coexistence of conventional and unconventional oil and gas reservoirs,multi-layered reservoir hydrocarbon supply,multiple reservoir types,multiple trap types,multi-staged hydrocarbon accumulation and multiple hydrocarbon accumulation models.Besides,its natural gas enrichment is affected by hydrocarbon source intensity,large paleo-uplift,favorable sedimentary facies belt,sedimentaryestructural discontinuity plane and structural fracture development.Finally,the natural gas exploration and research targets of each layer in the Sichuan Basin were predicted according to the basic petroleum geologic conditions,enrichment laws and exploration status.
基金Supported by the National Natural Science Foundation of China(U22B6002)PetroChina Science and Technology Project(2023ZZ14).
文摘Significant exploration progress has been made in ultra-deep clastic rocks in the Kuqa Depression,Tarim Basin,over recent years.A new round of comprehensive geological research has formed four new understandings:(1)Establish structural model consisting of multi-detachment composite,multi-stage structural superposition and multi-layer deformation.Multi-stage structural traps are overlapped vertically,and a series of structural traps are discovered in underlying ultra-deep layers.(2)Five sets of high-quality large-scale source rocks of three types of organic phases are developed in the Triassic and Jurassic systems,and forming a good combination of source-reservoir-cap rocks in ultra-deep layers with three sets of large-scale regional reservoir and cap rocks.(3)The formation of large oil and gas fields is controlled by four factors which are source,reservoir,cap rocks and fault.Based on the spatial configuration relationship of these four factors,a new three-dimensional reservoir formation model for ultra-deep clastic rocks in the Kuqa Depression has been established.(4)The next key exploration fields for ultra-deep clastic rocks in the Kuqa Depression include conventional and unconventional oil and gas.The conventional oil and gas fields include the deep multi-layer oil-gas accumulation zone in Kelasu,tight sandstone gas of Jurassic Ahe Formation in the northern structural zone,multi-target layer lithological oil and gas reservoirs in Zhongqiu–Dina structural zone,lithologic-stratigraphic and buried hill composite reservoirs in south slope and other favorable areas.Unconventional oil and gas fields include deep coal rock gas of Jurassic Kezilenuer and Yangxia formations,Triassic Tariqike Formation and Middle-Lower Jurassic and Upper Triassic continental shale gas.The achievements have important reference significance for enriching the theory of ultra-deep clastic rock oil and gas exploration and guiding the future oil and gas exploration deployment.
基金Project supported by the General Program of National Natural Science Foundation of China(51871195,51501015)。
文摘Magnesium cylindrical parts have relatively poor mechanical properties and distinct anisotropy of microstructure,which hinder their application as structural components.To improve the performance of WE71 cylindrical parts,multi-direction forging(MDF)was introduced before back extrusion,and the microstructure and mechanical properties were investigated.Results of microstructure show that the grain size in the outer of the cylindrical bottom is refined from 30.1 to 27.7μm,the micro structure is more uniform and the dislocation density is higher.The bimodal grain structure is formed in the outer of the cylindrical wall,which is ascribed to the formation of MgsRE phases along grain boundaries.These phases result in the Zener pinning effect on grain boundaries and the reduction of DRX volume fraction.The texture type of the cylindrical bottom is<0001>‖ED and the cylindrical wall is<1010>‖ED,and the maximum pole intensity is 1.986 and 1.664,respectively.Results of the tensile test at room temperature show that combined improved strength and ductility of the cylindrical part is attained after introducing the MDF process.The ultimate tensile strength(UTS),yield strength(YS)and elongation are279 MPa,185 MPa and 12%at the bottom and 299 MPa,212 MPa and 20%at the wall.
基金funded by the Science and Technology Research and Development Program of the China Petroleum & Chemical Corporation(No.P06088)the Nonprofit Special Research Program(No.200811015)the Land Resource Survey Project of the Ministry of Land and Natural Resources,China(No.1212010782003)
文摘Detachment structures occur widely in the crust, and it is the commonest and most important deformation type developed in the region between orogenic belts and basins. The ＇comb-like＇ and ＇toughlike＇ fold belts in eastern Sichuan are caused by multi-layer detachment. The duplex structure is the most important deformation style in the region, exhibiting different characteristics from typical detachment structures. Different deformation styles, scales, and shortenings resulting from independent deformations of various detachment systems would lead to the phenomenon whereby most of the topographical heights in the region do not correspond to the structural heights in depth. Based on systematic structural analysis and combined with practical oil/gas prospecting, four types of structural traps are described from eastern Sichuan Province, which are： detachment and thrust trap; detachment folding trap; fault-flat blocking trap; and detachment layer trap. Meticulous studies on the deformation and distribution of detachment layers in the eastern Sichuan Province will contribute to oil/gas prospecting and selection of potential regions of marine-origin oil/gas prospecting in South China.
基金financial support of the National Natural Science Foundation of China(No.52025061 and No.51961130386)the financial support from the Royal Society-Newton Advanced Fellowship grant(NAF\R1\191163).
文摘Heat conduction in multi-layer and composite materials is one of the fundamental heat transfer problems in many industrial applications.Due to different materials types,interface conditions,and various geometries of these laminates,the heat conduction mechanism is more complicated than that of one-layer isotropic media.Analytical solutions are the best ways to study and understand such problems in depth.In this study,different existing analytical solutions for heat conduction in multi-layer and composite materials are reviewed and classified in rectangular,cylindrical,spherical,and conical coordinates.Applied boundary conditions,internal heat source,and thermal contact resistance as the most critical parameters in the solution complexity investigated in the literature,are discussed and summarized in different tables.Various types of multi-layer structures such as isotropic,anisotropic,orthotropic,and reinforced laminates are included in this study.It is found that although more than half a century has passed since the beginning of the research on heat transfer in multi-layer composites,new researches that can help with a better understanding in this area are still being offered.The challenges and shortcomings in this area are also discussed to guide future researches.
基金This study was funded by the National Natural Science Foundation of China(Grant Nos:51278188,50808077,and 51778224)Project of Young Core Instructor Growth from Hunan Province of Chinathe financial support from the China Scholarship Council(CSC)under No.201606130003
文摘A better understanding of the mechanical behavior of the multilayered structure under extermal loading is the most important item for the structural design and the risk asssment.The objective of this study are to propose and develop an analytical solution for the mechanical behaviors of multi-layered structure generated by axisy mmetric loading,and to investigate the impact of anisotropic layers and interlayer conditions on the multi-layered structure.To reach these objectives,first,according to the goveming equations,the analytical solution for a single layer was formulated by adopting the spatial Hankel transform.Then the global matrix technique is applied to achieve the analytical solution of multi-layered structure in Hankel domain.The sliding and bonded interlayer conditions were considered in this process.Finally,the numerical inversion of integral transform was used to solve the components of displacement and stress in real domain.Gauss-Lcgendre quadrature is a key scheme in the numerical inversion process.Moreover,following by the verification of the proposed analytical solution,one typical three-layered flexible pavement was applied as the computing carrier of numerical analysis for the multi-layered structure.The results have shown that the anisotropic layers and the interlayer conditions significantly affect the mechanical behaviors of the proposed structure.
基金supported by the National Natural Science Foundation of China(Nos.22078184 and 22378249)the China Postdoctoral Science Foundation(No.2019M653853XB)the Natural Science Advance Research Foundation of Shaanxi University of Science and Technology(No.2018QNBJ-03).
文摘Developing porous self-supporting electrodes with excellent conductivity,good mechanical properties,and high electrochemical activity is crucial for constructing electrode materials with lightweight,ultra-thin,flexible,and high capacitance performance.In this work,we prepared a cellulose nanofibers(CNFs)/carbon nanotubes(CNTs)/vinasse activated carbon(VAC)(CCV)composite material with a multi-layer hierarchical conductive structure through simple vacuum filtration and freeze-drying.In this composite material,the self-assembly of CNF provides the main skeleton structure of a multi-layer hierarchical structure.CNT provides a fast path for the rapid transfer of electrons and is beneficial for the loss of electromagnetic waves.VAC provides sufficient double layer performance.The synergistic effect of the above three endows CCV composite materials with excellent energy storage performance and electromagnetic interference(EMI)shielding performance.In addition,we endowed the CCV composite with a certain shape and performance by introducing a vitrimer polymer with a dynamic cross-linked network structure.In summary,thanks to the synergistic effect of various components in the multi-layer hierarchical structure,CCV composite materials exhibit excellent integration performance,especially stable energy storage performance and EMI shielding performance.These significant properties make CCV composite materials have great application prospects in the fields of energy storage and intelligent EMI shielding.
基金supported by the National Natural Science Foundation of China(NSFC,Grant No.52275420)the National Key R&D Program of China(2022YFB3403304)the Natural Science Foundation of Hunan Province[Grant No.2022JJ30136].
文摘Droplet transport still faces numerous challenges,such as a limited transport distance,large volume loss,and liquid contamination.Inspired by the principle of‘synergistic biomimetics’,we propose a design for a platform that enables droplets to be self-propelled.The orchid leaf-like three-dimensional driving structure provides driving forces for the liquid droplets,whereas the lotus leaf-like superhydrophobic surface prevents liquid adhesion,and the bamboo-like nodes enable long-distance transport.During droplet transport,no external energy input is required,no fluid adhesion or residue is induced,and no contamination or mass loss of the fluid is caused.We explore the influence of various types and parameters of wedge structures on droplet transportation,the deceleration of droplet speed at nodal points,and the distribution of internal pressure.The results indicate that the transport platform exhibits insensitivity to pH value and temperature.It allows droplets to be transported with varying curvatures in a spatial environment,making it applicable in tasks like target collection,as well as load,fused,anti-gravity,and long-distance transport.The maximum droplet transport speed reached(58±5)mm·s^(−1),whereas the transport distance extended to(136±4)mm.The developed platform holds significant application prospects in the fields of biomedicine and chemistry,such as high-throughput screening of drugs,genomic bioanalysis,microfluidic chip technology for drug delivery,and analysis of biological samples.
基金supported by the National Natural Science Foundation of China(90716008)the National Basic Research Program of China(2009CB724100).
文摘Despite dedicated effort for many decades,statistical description of highly technologically important wall turbulence remains a great challenge.Current models are unfortunately incomplete,or empirical,or qualitative.After a review of the existing theories of wall turbulence,we present a new framework,called the structure ensemble dynamics （SED）,which aims at integrating the turbulence dynamics into a quantitative description of the mean flow.The SED theory naturally evolves from a statistical physics understanding of non-equilibrium open systems,such as fluid turbulence, for which mean quantities are intimately coupled with the fluctuation dynamics.Starting from the ensemble-averaged Navier-Stokes（EANS） equations,the theory postulates the existence of a finite number of statistical states yielding a multi-layer picture for wall turbulence.Then,it uses order functions（ratios of terms in the mean momentum as well as energy equations） to characterize the states and transitions between states.Application of the SED analysis to an incompressible channel flow and a compressible turbulent boundary layer shows that the order functions successfully reveal the multi-layer structure for wall-bounded turbulence, which arises as a quantitative extension of the traditional view in terms of sub-layer,buffer layer,log layer and wake. Furthermore,an idea of using a set of hyperbolic functions for modeling transitions between layers is proposed for a quantitative model of order functions across the entire flow domain.We conclude that the SED provides a theoretical framework for expressing the yet-unknown effects of fluctuation structures on the mean quantities,and offers new methods to analyze experimental and simulation data.Combined with asymptotic analysis,it also offers a way to evaluate convergence of simulations.The SED approach successfully describes the dynamics at both momentum and energy levels, in contrast with all prevalent approaches describing the mean velocity profile only.Moreover,the SED theoretical framework is general,independent of the flow system to study, while the actual functional form of the order functions may vary from flow to flow.We assert that as the knowledge of order functions is accumulated and as more flows are analyzed, new principles（such as hierarchy,symmetry,group invariance,etc.） governing the role of turbulent structures in the mean flow properties will be clarified and a viable theory of turbulence might emerge.
基金The authors would like to thank Prof.Shu Takagi and Prof.Huaxiong Huang for their instructive comments.The authors would also like to acknowledge Jianda Yang for assisting with FEM simulations.This work was supported by the National Natural Science Foundation of China(Grants 11372191,11232010,11650(Grant 91111138)the National Institute of Health(Grant 2R01DC005642-10A1).
文摘Mechanical stimuli play critical roles in cardiovascular diseases,in which in vivo stresses in blood vessels present a great challenge to predict.Based on the structural-thermal coupled finite element method,we propose a thermal expansion method to estimate stresses in multi-layer blood vessels under healthy and pathological conditions.The proposed method provides a relatively simple and convenient means to predict reliable in vivo mechanical stresses with accurate residual stress.The method is first verified with the opening-up process and the pressure-radius responses for single and multi-layer vessel models.It is then applied to study the stress variation in a human carotid artery at different hypertension stages and in a plaque of vascular stenosis.Our results show that specific or optimal residual stresses exist for different blood pressures,which helps form a homogeneous stress distribution across vessel walls.High elastic shear stress is identified on the shoulder of the plaque,which contributes to the tearing effect in plaque rupture.The present study indicates that the proposed numerical method is a capable and efficient in vivo stress evaluation of patient-specific blood vessels for clinical purposes.
