The use of ultra-high molecular weight polyethylene(UHMWPE)composite in the design of lightweight protective equipment,has gained a lot of interest.However,there is an urgent need to understand the ballistic response ...The use of ultra-high molecular weight polyethylene(UHMWPE)composite in the design of lightweight protective equipment,has gained a lot of interest.However,there is an urgent need to understand the ballistic response mechanism and theoretical prediction model of performance.This paper explores the ballistic response mechanism of UHMWPE composite through experimental and simulation analyses.Then,a resistance-driven modeling method was proposed to establish a theoretical model for predicting the bulletproof performance.The ballistic response mechanism of UHMWPE composite encompassed three fundamental modes:local response,structural response,and coupled response.The occurrence ratio of these fundamental response modes during impact was dependent on the projectile velocity and laminate thickness.The bulletproof performance of laminate under different response modes was assessed based on the penetration depth of the projectile,the bulging height on the rear face of the laminate,the thickness of remaining sub-laminate,and residual velocity of the projectile.The absolute deviations of bulletproof performance indicator between theoretical value and experimental value were well within 11.13%,demonstrating that the established evaluation model possessed high degree of prediction accuracy.展开更多
In recent years, advanced composite structures are used extensively in many industries such as aerospace, aircraft, automobile, pipeline and civil engineering. Reliability and safety are crucial requirements posed by ...In recent years, advanced composite structures are used extensively in many industries such as aerospace, aircraft, automobile, pipeline and civil engineering. Reliability and safety are crucial requirements posed by them to the advanced composite structures be- cause of their harsh working conditions. Therefore, as a very important measure, structural health monitoring （SHM） in-service is deft- nitely demanded for ensuring their safe working in-situ. In this paper, fiber Bragg grating （FBG） sensors are surface-mounted on the hoop and in the axial directions of a FRP pressure vessel to monitor the strain status during its pressurization. The experimental results show that the FBG sensors could be used to monitor the strain development and determine the ultimate failure strain of the composite pressure vessel.展开更多
This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steel- fiber reinforced concrete,sandstone a...This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steel- fiber reinforced concrete,sandstone and crystal-polymer composite.The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated.The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform(WT)coefficients of the transform spectrum.The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry,both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials.展开更多
Delamination represents one of the most severe failure modes in composite laminates,especially when they are subjected to uniaxial compression loads.The evaluation of the delamination damage has always been an essenti...Delamination represents one of the most severe failure modes in composite laminates,especially when they are subjected to uniaxial compression loads.The evaluation of the delamination damage has always been an essential issue of composite laminates for durability and damage tolerance in engineering practice.Focusing on the most typical and representative elliptical delamination issue,an analytical model simultaneously considering the conservative buckling process and non-conservative delamination propagation process is implemented.Various computational cases considering different delamination depths,directions,aspect ratios,and areas are established,and the predicted results based on the analytical model are carefully compared.Effects of these geometrical delamination parameters on the buckling,delamination propagation,and failure behaviors of composite laminates are thoroughly analyzed,and innovative evaluation principles of the delamination damage have been concluded.It is found that the delamination area is the key factor that truly affecting the failure behaviors of delaminated composites,and the local/global buckling and failure loads show clear linearity with the delamination area,whilst the delamination depth and direction only have slight effects.展开更多
Safety evaluation of toppling rock slopes developing in reservoir areas is crucial. To reduce the uncertainty of safety evaluation, this study developed a composite cloud model, which improved the combination weights ...Safety evaluation of toppling rock slopes developing in reservoir areas is crucial. To reduce the uncertainty of safety evaluation, this study developed a composite cloud model, which improved the combination weights of the decision-making trial and evaluation laboratory (DEMATEL) and criteria importance through intercriteria correlation (CRITIC) methods. A safety evaluation system was developed according to in situ monitoring data. The backward cloud generator was used to calculate the numerical characteristics of a cloud model of quantitative indices, and different virtual clouds were used to synthesize some clouds into a generalized one. The synthesized numerical characteristics were calculated to comprehensively evaluate the safety of toppling rock slopes. A case study of a toppling rock slope near the Huangdeng Hydropower Station in China was conducted using monitoring data collected since operation of the hydropower project began. The results indicated that the toppling rock slope was moderately safe with a low safety margin. The composite cloud model considers the fuzziness and randomness of safety evaluation and enables interchange between qualitative and quantitative knowledge. This study provides a new theoretical method for evaluating the safety of toppling rock slopes. It can aid in the predication, control, and even prevention of disasters.展开更多
The use of terahertz time-domain spectroscopy(THz-TDS)for the nondestructive testing and evaluation(NDT&E)of materials and structural systems has attracted significant attention over the past two decades due to it...The use of terahertz time-domain spectroscopy(THz-TDS)for the nondestructive testing and evaluation(NDT&E)of materials and structural systems has attracted significant attention over the past two decades due to its superior spatial resolution and capabilities of detecting and characterizing defects and structural damage in non-conducting materials.In this study,the THz-TDS system is used to detect,localize and evaluate hidden multi-delamination defects(i.e.,a three-level multi-delamination system)in multilayered GFRP composite laminates.To obtain accurate results,a wavelet shrinkage de-noising algorithm is used to remove the noise from the measured time-of-flight(TOF)signals.The thickness and location of each delamination defect in the z-direction(i.e.,through-the-thickness direction)are calculated from the de-noised TOF signals considering the interaction between the pulsed THz waves and the different interfaces in the GFRP composite laminates.A comparison between the actual and the measured thickness values of the delamination defects before and after the wavelet shrinkage denoising process indicates that the latter provides better results with less than 3.712%relative error,while the relative error of the non-de-noised signals reaches 16.388%.Also,the power and absorbance levels of the THz waves at every interface with different refractive indices in the GFRP composite laminates are evaluated based on analytical and experimental approaches.The present study provides an adequate theoretical analysis that could help NDT&E specialists to estimate the maximum thickness of GFRP composite materials and/or structures with different interfaces that can be evaluated by the THz-TDS.Also,the accuracy of the obtained results highlights the capabilities of the THz-TDS for the NDT&E of multilayered GFRP composite laminates.展开更多
3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evalu...3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.展开更多
With the implementation of new-generation launch vehicles,space stations,lunar and deep space exploration,etc.,the development of spacecraft structures will face new challenges. In order to reduce the spacecraft weigh...With the implementation of new-generation launch vehicles,space stations,lunar and deep space exploration,etc.,the development of spacecraft structures will face new challenges. In order to reduce the spacecraft weight and increase the payload,composite material structures will be widely used. It is difficult to evaluate the strength and life of composite materials due to their complex mechanism and various phenomena in damage and failure.Meanwhile,the structures of composite materials used in spacecrafts will bear complex loads,including the coupling loads of tension,pressure,bending,shear,and torsion. Static loads,thermal loads,and vibration loads may occur at the same time,which asks for verification requirements to ensure the structure safety. Therefore,it is necessary to carry out a systematic multi-level experimental study. In this paper,the building block approach (BBA) is used to investigate the multilevel composite material structures for spacecrafts. The advanced measurement technology is adopted based on digital image correlation (DIC) and piezoelectric and optical fiber sensors to measure the composite material structure deformation. The virtual experiment technology is applied to provide sufficient and reliable data for the evaluation of the composite material structures of spacecrafts.展开更多
This paper aims to establish a 3D evaluation method for cutting surface topography of C/C composites. The cutting surface is measured by Talyscan 150, using 3D non-contact measurement. By evaluating 2D and 3D roughnes...This paper aims to establish a 3D evaluation method for cutting surface topography of C/C composites. The cutting surface is measured by Talyscan 150, using 3D non-contact measurement. By evaluating 2D and 3D roughness of C/C composite and Duralumin, the 2D evaluation method of the cutting surface topography of C/C composite loses a lot of information, and the characteristics of the surface topography of C/C composite can be comprehensively and authentically evaluated only by the 3D evaluation method. Furthermore, 3D amplitude and spatial parameters are adopted to evaluate the surface and the results show that： the topography of the C/C composite is anisotropy and there are no obvious feeding textures but abrupt peaks and valleys on surface of the C/C composite, which indicates that the machining mecha- nism is different from that of the metal. In conclusion, The C/C composite surface is evaluated using a 3D evaluation method, the roughness error is small, and the unique topography characteristics earl be au- thentically evaluated.展开更多
The equilibrium phase and adiabatic temperature for combustion synthesis of Al_2O_3/B_4C employing Al, B_2O_3 and C as starting materials is analyzed by both conventional and CALPHAD method. The adiabatic temperature ...The equilibrium phase and adiabatic temperature for combustion synthesis of Al_2O_3/B_4C employing Al, B_2O_3 and C as starting materials is analyzed by both conventional and CALPHAD method. The adiabatic temperature calculed by CALPHAD method is significantly lower than that obtained by conventional method. The CALPHAD calculation also reveals that the equilibrium phases presented at the adiabatic temperature are different to the desired composites. The adiabatic temperature in this system can be lowered by introducing Al_2O_3 as diluents. The maximum amount of Al_2O_3 that can be added to the system while maintain a self-sustaining combusion mode is 1.3 mol.展开更多
The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive...The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive index of films is determined from transmittance spectra. Three different regimes are identified, T 〈 500℃, 500℃ 〈 T 〈 800℃ and T 〉 800℃. The Rutherford baekscattering spectra show that with increasing the annealing temperature, the concentration of nickel atoms into films decreases. It is shown that the effect of annealing temperatures for increasing films densification at T 〈 500℃ and T 〉 800℃ is greater than the effect of nickel concentrations. It is observed that the effect of decreasing nickel atoms into films at 500℃ 〈 T 〈 800℃ strongly causes improving porosity and decreasing densification. The fractal dimensions of carbon-nickel films annealed from 300 to 500℃ are increased, while from 500 to 1000℃ these characteristics are decreased. It can be seen that at 800℃, films have maximum values of porosity and roughness.展开更多
The effect of seed oil of Korean pine (Pinus koraiensis) on the rats' blood-fat and its anti-ageing function was stud-ied for appraising the efficacy of the seed oil of Korean pine. Sixty experimental rats were ra...The effect of seed oil of Korean pine (Pinus koraiensis) on the rats' blood-fat and its anti-ageing function was stud-ied for appraising the efficacy of the seed oil of Korean pine. Sixty experimental rats were randomly divided into 5 groups (half males and half females in each group) as normal control group, high fat diet control group, and three groups (Group 1 Group 2, Group 3) that were fed with feedstuff with the contents of the seed oil of 2.0g/(kgd-1), 4.0g/(kgd-1) and 8.0g/(kgd-1), respec-tively. The indexes such as superoxide dismutase (SOD), glutathione peroxidase (GSH-PX) and anti-oxidation capacity (AOC) were measured by Reagent Kit method. It was found that the seed oil of the Korean pine could reduce the content of triglyc-eride and improve SOD as well as GSH-PX activity in serum. These indexes of the rats in Group 2 fed with Korean pine seed oil of 4.0 g/(kgd-1) reached the significant level and those of rats in Group 3 fed with the seed oil of 8.0 g/(kgd-1) reached the extremely significant level. The results indicated the seed oil of Korean pine had function of regulating the level of blood-fat and anti-ageing.展开更多
In this study,the competitive failure mechanism of bolt loosening and fatigue is elucidated via competitive failure tests on bolts under composite excitation.Based on the competitive failure mechanism,the mode predict...In this study,the competitive failure mechanism of bolt loosening and fatigue is elucidated via competitive failure tests on bolts under composite excitation.Based on the competitive failure mechanism,the mode prediction model and“load ratio-life prediction curve”(ξ-N curve)of the bolt competitive failure are established.Given the poor correlation of theξ-N curve,an evaluation model of the bolt competitive failure life is proposed based on Miner’s linear damage accumulation theory.Based on the force analysis of the thread surface and simulation of the bolt connection under composite excitation,a theoretical equation of the bolt competitive failure life is established to validate the model for evaluating the bolt competitive failure life.The results reveal that the proposed model can accurately predict the competitive failure life of bolts under composite excitation,and thereby,it can provide guidance to engineering applications.展开更多
Most loan evaluation methods in peer-to-peer(P2P)lending mainly exploit the borrowers’credit information.However,the present study presents the maturity-based lender composition score,which exploits the investment ca...Most loan evaluation methods in peer-to-peer(P2P)lending mainly exploit the borrowers’credit information.However,the present study presents the maturity-based lender composition score,which exploits the investment capability of a group of lenders who fund the same loan,to enhance the P2P loan evaluation.More specifically,we extract lenders’profiles in terms of performance,risk,and experience by quantifying their investment history and develop our loan evaluation indicator by aggregating the profiles of lenders in the composition.To measure the ability of a lender for continuous improvement in P2P investment,we introduce lender maturity to capture this evolvement and incorporate it into the aggregation process.Our empirical study demonstrates that the maturity-based lender composition score can serve as an effective indicator for identifying loan quality and be included in other commonly used loan evaluation models for accuracy improvement.展开更多
[Objectives]This study aimed to optimize the extraction process of longan(Dimocarpus longan Lour.)leaves by multi-indicator comprehensive evaluation method.[Methods]The contents of gallic acid ethyl ester,astragalin,q...[Objectives]This study aimed to optimize the extraction process of longan(Dimocarpus longan Lour.)leaves by multi-indicator comprehensive evaluation method.[Methods]The contents of gallic acid ethyl ester,astragalin,quercetin,luteolin and kaempferol in longan leaves were determined simultaneously by HPLC.Using the multi-indicator comprehensive evaluation method,the methanol concentration,solid to liquid ratio and extraction time for extraction of longan leaves were optimized by orthogonal test.[Results]The optimal extraction process of longan leaves are as follows:methanol concentration of 100%,solid to liquid ratio of 1∶5,and extraction time of 50 min.[Conclusions]The optimized process is simple and feasible,and it can be used to determine the contents of different ingredients in longan leaves.展开更多
In order to improve the surface performace of epoxy asphalt pavement （EAP） for steel bridge deck, an epoxy asphalt chip seal （ ECS） covered by a cationic emulsified asphalt fog seal （i. e., fog-sealed chip seal）...In order to improve the surface performace of epoxy asphalt pavement （EAP） for steel bridge deck, an epoxy asphalt chip seal （ ECS） covered by a cationic emulsified asphalt fog seal （i. e., fog-sealed chip seal） isproposed and a laboratory study is conducted to design and evaluate te fog-sealed chip seal. First, the evaluation indices and methods of te chip seal on steel bridge deck pavement were proposed. Secondly, the worst pavement conditions during te maintenance time were simulated by te small traffic load simulation system MMLS3 and the short-term aging test for minimizing the failure probability of chip seal. Finally, the design parameters of fog-sealed chip seal were determined by the experimental analysis and the performance of the designed fog-sealed chip seal was evaluated in thelaboratory. Results indicate that the proposed simulation method of pavement conditions is effective and the maximal load repetitions on the EAPslab specimen are approximately 925 300 times. Moreover, the designed fog-sealedchip sealcan provide a dense surface with sufficient skid resistance,aggregate-asphalt aahesive performance and interlayer shearing resistance.展开更多
Composite sucker rod has been extensively used due to its high strength, light weight and corrosion resistive nature. However, such composite sucker rod is diffcult for conventional non-destructive evaluation(NDE) tec...Composite sucker rod has been extensively used due to its high strength, light weight and corrosion resistive nature. However, such composite sucker rod is diffcult for conventional non-destructive evaluation(NDE) techniques to inspect because of its complex material and/or structure. It is thus useful to embark research on developing novel NDE technique to comply the inspection requirement. This work demonstrates the feasibility of using the capacitive imaging(CI) technique for the inspection of composite sucker rod. Finite element(FE) models were constructed in COMSOL to simulate the detection of defects in the glass-fiber layer and on the carbon core surface. An FE Model based inversion method is proposed to obtain the profile of the carbon core. Preliminary CI experimental results are then presented, including the detection of surface wearing defect in the glass-fiber layer, and obtaining the profile of the carbon core. A set of accelerated aging experiments were also carried out and the results indicate that the CI technique is potentially useful in evaluating the ageing status of such composite sucker rod. The CI technique described in this work shows great potential to target some challenging tasks faced in the non-destructive evaluation of composite sucker rod, including quality control, defect detection and ageing assessment.展开更多
Fiber-reinforced polymer composite materials have become materials of choice for manufacturing application due to their high specific stiffness, strength and fatigue life, low density and thermal expansion coefficient...Fiber-reinforced polymer composite materials have become materials of choice for manufacturing application due to their high specific stiffness, strength and fatigue life, low density and thermal expansion coefficient. However, there are some types of defects such as porosity that form during the manufacturing processes of composites and alter their mechanical behavior and material properties. In his study, hand lay-up was conducted to fabricate samples of carbon fiber-reinforced polymer composites with three different vacuum levels in order to vary porosity content. Nondestructive evaluation, destructive techniques and mechanical testing were conducted. Nondestructive evaluation results showed the trend in percentages of porosity through-thickness. Serial sectioning images revealed significant details about the composite’s internal structure such as the volume, morphology and distribution of porosity. Mechanical testing results showed that porosity led to a decrease in both Mode I static interlaminar fracture toughness and Mode I cyclic strain energy release rate fatigue life. The fractographic micrographs showed that porosity content increased as the vacuum decreased, and it drew a relationship between fracture mechanisms and mechanical properties of the composite under different modes of loading as a result of the porosity effects. Finally, in order to accurately quantify porosity percentages included in the samples of different vacuum levels, a comparison was made between the parameters and percentages resulted from the nondestructive evaluation and mechanical testing and the features resulted from fractography and serial sectioning.展开更多
Psychosocial factors are important elements in the assessment and follow-up care for vascularized composite allotransplantation(VCA) and require multidisciplinary evaluation protocols. This review will highlight diffe...Psychosocial factors are important elements in the assessment and follow-up care for vascularized composite allotransplantation(VCA) and require multidisciplinary evaluation protocols. This review will highlight differences between VCA with solid organ transplantation(SOT), provide information on the psychosocial selection of VCA candidates, ethical issues, psychological outcomes, and on the need for multicenter research. VCA is primarily a life-enhancing procedure to improve recipients' quality of life and psychological well-being and it represents a potential option to provide reproduction in case of penile or uterine transplantation. The risk benefit ratio is distinctly different than SOT with candidates desiring life enhancing outcomes including improved body image, return to occupations, restored touch, and for uterine transplant, pregnancy. The Chauvet Workgroup has been convened with membership from a number of transplant centers to address these issues and to call for multicenter research. A multicenter research network would share similar evaluation approaches so that meaningful research on psychosocial variables could inform the transplant community and patients about factors that increase risk of non-adherence and other adverse psychosocial and medical outcomes.展开更多
基金supported by the National Key Research and Development of China(Grant No.2022YFB4601901)the National Natural Science Foundation of China(Grant No.12122202)。
文摘The use of ultra-high molecular weight polyethylene(UHMWPE)composite in the design of lightweight protective equipment,has gained a lot of interest.However,there is an urgent need to understand the ballistic response mechanism and theoretical prediction model of performance.This paper explores the ballistic response mechanism of UHMWPE composite through experimental and simulation analyses.Then,a resistance-driven modeling method was proposed to establish a theoretical model for predicting the bulletproof performance.The ballistic response mechanism of UHMWPE composite encompassed three fundamental modes:local response,structural response,and coupled response.The occurrence ratio of these fundamental response modes during impact was dependent on the projectile velocity and laminate thickness.The bulletproof performance of laminate under different response modes was assessed based on the penetration depth of the projectile,the bulging height on the rear face of the laminate,the thickness of remaining sub-laminate,and residual velocity of the projectile.The absolute deviations of bulletproof performance indicator between theoretical value and experimental value were well within 11.13%,demonstrating that the established evaluation model possessed high degree of prediction accuracy.
文摘In recent years, advanced composite structures are used extensively in many industries such as aerospace, aircraft, automobile, pipeline and civil engineering. Reliability and safety are crucial requirements posed by them to the advanced composite structures be- cause of their harsh working conditions. Therefore, as a very important measure, structural health monitoring （SHM） in-service is deft- nitely demanded for ensuring their safe working in-situ. In this paper, fiber Bragg grating （FBG） sensors are surface-mounted on the hoop and in the axial directions of a FRP pressure vessel to monitor the strain status during its pressurization. The experimental results show that the FBG sensors could be used to monitor the strain development and determine the ultimate failure strain of the composite pressure vessel.
基金The project supported by the National Natural Science Foundation of China (10125211 and 10072002),the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete,and the Institute of Chemical Materials,CAEP at Mianyang
文摘This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steel- fiber reinforced concrete,sandstone and crystal-polymer composite.The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated.The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform(WT)coefficients of the transform spectrum.The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry,both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials.
基金The research work is supported by the National Science Foundation of China(Nos.11572058,11772028,11872131 and U1864208).
文摘Delamination represents one of the most severe failure modes in composite laminates,especially when they are subjected to uniaxial compression loads.The evaluation of the delamination damage has always been an essential issue of composite laminates for durability and damage tolerance in engineering practice.Focusing on the most typical and representative elliptical delamination issue,an analytical model simultaneously considering the conservative buckling process and non-conservative delamination propagation process is implemented.Various computational cases considering different delamination depths,directions,aspect ratios,and areas are established,and the predicted results based on the analytical model are carefully compared.Effects of these geometrical delamination parameters on the buckling,delamination propagation,and failure behaviors of composite laminates are thoroughly analyzed,and innovative evaluation principles of the delamination damage have been concluded.It is found that the delamination area is the key factor that truly affecting the failure behaviors of delaminated composites,and the local/global buckling and failure loads show clear linearity with the delamination area,whilst the delamination depth and direction only have slight effects.
基金supported by the Natural Science Foundation of China(Grant No.51939004)the Fundamental Research Funds for the Central Universities(Grant No.B210204009)the China Huaneng Group Science and Technology Project(Grant No.HNKJ18-H24).
文摘Safety evaluation of toppling rock slopes developing in reservoir areas is crucial. To reduce the uncertainty of safety evaluation, this study developed a composite cloud model, which improved the combination weights of the decision-making trial and evaluation laboratory (DEMATEL) and criteria importance through intercriteria correlation (CRITIC) methods. A safety evaluation system was developed according to in situ monitoring data. The backward cloud generator was used to calculate the numerical characteristics of a cloud model of quantitative indices, and different virtual clouds were used to synthesize some clouds into a generalized one. The synthesized numerical characteristics were calculated to comprehensively evaluate the safety of toppling rock slopes. A case study of a toppling rock slope near the Huangdeng Hydropower Station in China was conducted using monitoring data collected since operation of the hydropower project began. The results indicated that the toppling rock slope was moderately safe with a low safety margin. The composite cloud model considers the fuzziness and randomness of safety evaluation and enables interchange between qualitative and quantitative knowledge. This study provides a new theoretical method for evaluating the safety of toppling rock slopes. It can aid in the predication, control, and even prevention of disasters.
基金National Natural Science Foundation of China(Grant Nos.52275096,52005108,52275523)Fuzhou-Xiamen-Quanzhou National Independent Innovation Demonstration Zone High-end Equipment Vibration and Noise Detection and Fault Diagnosis Collaborative Innovation Platform ProjectFujian Provincial Major Research Project(Grant No.2022HZ024005)。
文摘The use of terahertz time-domain spectroscopy(THz-TDS)for the nondestructive testing and evaluation(NDT&E)of materials and structural systems has attracted significant attention over the past two decades due to its superior spatial resolution and capabilities of detecting and characterizing defects and structural damage in non-conducting materials.In this study,the THz-TDS system is used to detect,localize and evaluate hidden multi-delamination defects(i.e.,a three-level multi-delamination system)in multilayered GFRP composite laminates.To obtain accurate results,a wavelet shrinkage de-noising algorithm is used to remove the noise from the measured time-of-flight(TOF)signals.The thickness and location of each delamination defect in the z-direction(i.e.,through-the-thickness direction)are calculated from the de-noised TOF signals considering the interaction between the pulsed THz waves and the different interfaces in the GFRP composite laminates.A comparison between the actual and the measured thickness values of the delamination defects before and after the wavelet shrinkage denoising process indicates that the latter provides better results with less than 3.712%relative error,while the relative error of the non-de-noised signals reaches 16.388%.Also,the power and absorbance levels of the THz waves at every interface with different refractive indices in the GFRP composite laminates are evaluated based on analytical and experimental approaches.The present study provides an adequate theoretical analysis that could help NDT&E specialists to estimate the maximum thickness of GFRP composite materials and/or structures with different interfaces that can be evaluated by the THz-TDS.Also,the accuracy of the obtained results highlights the capabilities of the THz-TDS for the NDT&E of multilayered GFRP composite laminates.
基金Funded by the National Natural Science Foundation of China(No.50875036)
文摘3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.
文摘With the implementation of new-generation launch vehicles,space stations,lunar and deep space exploration,etc.,the development of spacecraft structures will face new challenges. In order to reduce the spacecraft weight and increase the payload,composite material structures will be widely used. It is difficult to evaluate the strength and life of composite materials due to their complex mechanism and various phenomena in damage and failure.Meanwhile,the structures of composite materials used in spacecrafts will bear complex loads,including the coupling loads of tension,pressure,bending,shear,and torsion. Static loads,thermal loads,and vibration loads may occur at the same time,which asks for verification requirements to ensure the structure safety. Therefore,it is necessary to carry out a systematic multi-level experimental study. In this paper,the building block approach (BBA) is used to investigate the multilevel composite material structures for spacecrafts. The advanced measurement technology is adopted based on digital image correlation (DIC) and piezoelectric and optical fiber sensors to measure the composite material structure deformation. The virtual experiment technology is applied to provide sufficient and reliable data for the evaluation of the composite material structures of spacecrafts.
基金Supported by the National Natural Science Foundation of China (No. 50875036)
文摘This paper aims to establish a 3D evaluation method for cutting surface topography of C/C composites. The cutting surface is measured by Talyscan 150, using 3D non-contact measurement. By evaluating 2D and 3D roughness of C/C composite and Duralumin, the 2D evaluation method of the cutting surface topography of C/C composite loses a lot of information, and the characteristics of the surface topography of C/C composite can be comprehensively and authentically evaluated only by the 3D evaluation method. Furthermore, 3D amplitude and spatial parameters are adopted to evaluate the surface and the results show that： the topography of the C/C composite is anisotropy and there are no obvious feeding textures but abrupt peaks and valleys on surface of the C/C composite, which indicates that the machining mecha- nism is different from that of the metal. In conclusion, The C/C composite surface is evaluated using a 3D evaluation method, the roughness error is small, and the unique topography characteristics earl be au- thentically evaluated.
文摘The equilibrium phase and adiabatic temperature for combustion synthesis of Al_2O_3/B_4C employing Al, B_2O_3 and C as starting materials is analyzed by both conventional and CALPHAD method. The adiabatic temperature calculed by CALPHAD method is significantly lower than that obtained by conventional method. The CALPHAD calculation also reveals that the equilibrium phases presented at the adiabatic temperature are different to the desired composites. The adiabatic temperature in this system can be lowered by introducing Al_2O_3 as diluents. The maximum amount of Al_2O_3 that can be added to the system while maintain a self-sustaining combusion mode is 1.3 mol.
文摘The densification and the fractal dimensions of carbon-nickel films annealed at different temperatures 300, 500, 800, and 1000℃ with emphasis on porosity evaluation are investigated. For this purpose, the refractive index of films is determined from transmittance spectra. Three different regimes are identified, T 〈 500℃, 500℃ 〈 T 〈 800℃ and T 〉 800℃. The Rutherford baekscattering spectra show that with increasing the annealing temperature, the concentration of nickel atoms into films decreases. It is shown that the effect of annealing temperatures for increasing films densification at T 〈 500℃ and T 〉 800℃ is greater than the effect of nickel concentrations. It is observed that the effect of decreasing nickel atoms into films at 500℃ 〈 T 〈 800℃ strongly causes improving porosity and decreasing densification. The fractal dimensions of carbon-nickel films annealed from 300 to 500℃ are increased, while from 500 to 1000℃ these characteristics are decreased. It can be seen that at 800℃, films have maximum values of porosity and roughness.
文摘The effect of seed oil of Korean pine (Pinus koraiensis) on the rats' blood-fat and its anti-ageing function was stud-ied for appraising the efficacy of the seed oil of Korean pine. Sixty experimental rats were randomly divided into 5 groups (half males and half females in each group) as normal control group, high fat diet control group, and three groups (Group 1 Group 2, Group 3) that were fed with feedstuff with the contents of the seed oil of 2.0g/(kgd-1), 4.0g/(kgd-1) and 8.0g/(kgd-1), respec-tively. The indexes such as superoxide dismutase (SOD), glutathione peroxidase (GSH-PX) and anti-oxidation capacity (AOC) were measured by Reagent Kit method. It was found that the seed oil of the Korean pine could reduce the content of triglyc-eride and improve SOD as well as GSH-PX activity in serum. These indexes of the rats in Group 2 fed with Korean pine seed oil of 4.0 g/(kgd-1) reached the significant level and those of rats in Group 3 fed with the seed oil of 8.0 g/(kgd-1) reached the extremely significant level. The results indicated the seed oil of Korean pine had function of regulating the level of blood-fat and anti-ageing.
基金Supported by National Natural Science Foundation of China(Grant No.52175123)the Independent Subject of State Key Laboratory of Traction Power(Grant No.2022TPL_T03).
文摘In this study,the competitive failure mechanism of bolt loosening and fatigue is elucidated via competitive failure tests on bolts under composite excitation.Based on the competitive failure mechanism,the mode prediction model and“load ratio-life prediction curve”(ξ-N curve)of the bolt competitive failure are established.Given the poor correlation of theξ-N curve,an evaluation model of the bolt competitive failure life is proposed based on Miner’s linear damage accumulation theory.Based on the force analysis of the thread surface and simulation of the bolt connection under composite excitation,a theoretical equation of the bolt competitive failure life is established to validate the model for evaluating the bolt competitive failure life.The results reveal that the proposed model can accurately predict the competitive failure life of bolts under composite excitation,and thereby,it can provide guidance to engineering applications.
基金supported by the Natural Science Foundation of China(Nos.71974031,71771034)the Chinese Universities Scientific Fund(No.DUT19RW216)+1 种基金the Economic and Social Development Project of Liaoning Province(No.20201slktyb-019)supported in part by the National Science Foundation(NSF)via the Grant Number IIS-1648664.
文摘Most loan evaluation methods in peer-to-peer(P2P)lending mainly exploit the borrowers’credit information.However,the present study presents the maturity-based lender composition score,which exploits the investment capability of a group of lenders who fund the same loan,to enhance the P2P loan evaluation.More specifically,we extract lenders’profiles in terms of performance,risk,and experience by quantifying their investment history and develop our loan evaluation indicator by aggregating the profiles of lenders in the composition.To measure the ability of a lender for continuous improvement in P2P investment,we introduce lender maturity to capture this evolvement and incorporate it into the aggregation process.Our empirical study demonstrates that the maturity-based lender composition score can serve as an effective indicator for identifying loan quality and be included in other commonly used loan evaluation models for accuracy improvement.
基金National Natural Science Foundation of China(81560691)Special Fund Project for Innovation Driven Development of Guangxi(Gui Ke AA17202046)+7 种基金Open Program for Construction of TCM Pharmacy Doctor Station in Guangxi University of Chinese Medicine(201410-06)The First-Class Subject of Traditional Chinese Medicine(Ethnic Pharmacy)in Guangxi(Gui Jiao Ke Yan[2018]No.12)Program of Collaborative Innovation Center of Zhuang and Yao Medicine(Gui Jiao Ke Yan[2013]No.20)Program of Key Laboratory of Zhuang and Yao Medicine[Gui Ke Ji Zi[2014]No.32]The Eighth Batch of Special Experts Project of Guangxi Zhuang Autonomous Region(Study on Quality Standard of Zhuang&Yao Medicine,[2019]No.13)High-level Talent Team Cultivation Program of"Qihuang Project"of Guangxi University of Chinese Medicine(2018002)High Level Innovation Team and Excellent Scholar Program of Guangxi Universities(Gui Jiao Shi Fan[2019]No.52)Guangxi One Thousand Young and Middle-aged College and University Backbone Teachers Cultivation Program(Gui Jiao Ren[2019]No.5).
文摘[Objectives]This study aimed to optimize the extraction process of longan(Dimocarpus longan Lour.)leaves by multi-indicator comprehensive evaluation method.[Methods]The contents of gallic acid ethyl ester,astragalin,quercetin,luteolin and kaempferol in longan leaves were determined simultaneously by HPLC.Using the multi-indicator comprehensive evaluation method,the methanol concentration,solid to liquid ratio and extraction time for extraction of longan leaves were optimized by orthogonal test.[Results]The optimal extraction process of longan leaves are as follows:methanol concentration of 100%,solid to liquid ratio of 1∶5,and extraction time of 50 min.[Conclusions]The optimized process is simple and feasible,and it can be used to determine the contents of different ingredients in longan leaves.
基金The National Natural Science Foundation of China(No.51378122)
文摘In order to improve the surface performace of epoxy asphalt pavement （EAP） for steel bridge deck, an epoxy asphalt chip seal （ ECS） covered by a cationic emulsified asphalt fog seal （i. e., fog-sealed chip seal） isproposed and a laboratory study is conducted to design and evaluate te fog-sealed chip seal. First, the evaluation indices and methods of te chip seal on steel bridge deck pavement were proposed. Secondly, the worst pavement conditions during te maintenance time were simulated by te small traffic load simulation system MMLS3 and the short-term aging test for minimizing the failure probability of chip seal. Finally, the design parameters of fog-sealed chip seal were determined by the experimental analysis and the performance of the designed fog-sealed chip seal was evaluated in thelaboratory. Results indicate that the proposed simulation method of pavement conditions is effective and the maximal load repetitions on the EAPslab specimen are approximately 925 300 times. Moreover, the designed fog-sealedchip sealcan provide a dense surface with sufficient skid resistance,aggregate-asphalt aahesive performance and interlayer shearing resistance.
基金Supported by National Natural Science Foundation of China(Grant Nos.51675536,51574276)Fundamental Research Funds for the Central Universities of China(Grant No.18CX02084A)Innovative Talents Program of Far East NDT New Technology&Application Forum
文摘Composite sucker rod has been extensively used due to its high strength, light weight and corrosion resistive nature. However, such composite sucker rod is diffcult for conventional non-destructive evaluation(NDE) techniques to inspect because of its complex material and/or structure. It is thus useful to embark research on developing novel NDE technique to comply the inspection requirement. This work demonstrates the feasibility of using the capacitive imaging(CI) technique for the inspection of composite sucker rod. Finite element(FE) models were constructed in COMSOL to simulate the detection of defects in the glass-fiber layer and on the carbon core surface. An FE Model based inversion method is proposed to obtain the profile of the carbon core. Preliminary CI experimental results are then presented, including the detection of surface wearing defect in the glass-fiber layer, and obtaining the profile of the carbon core. A set of accelerated aging experiments were also carried out and the results indicate that the CI technique is potentially useful in evaluating the ageing status of such composite sucker rod. The CI technique described in this work shows great potential to target some challenging tasks faced in the non-destructive evaluation of composite sucker rod, including quality control, defect detection and ageing assessment.
文摘Fiber-reinforced polymer composite materials have become materials of choice for manufacturing application due to their high specific stiffness, strength and fatigue life, low density and thermal expansion coefficient. However, there are some types of defects such as porosity that form during the manufacturing processes of composites and alter their mechanical behavior and material properties. In his study, hand lay-up was conducted to fabricate samples of carbon fiber-reinforced polymer composites with three different vacuum levels in order to vary porosity content. Nondestructive evaluation, destructive techniques and mechanical testing were conducted. Nondestructive evaluation results showed the trend in percentages of porosity through-thickness. Serial sectioning images revealed significant details about the composite’s internal structure such as the volume, morphology and distribution of porosity. Mechanical testing results showed that porosity led to a decrease in both Mode I static interlaminar fracture toughness and Mode I cyclic strain energy release rate fatigue life. The fractographic micrographs showed that porosity content increased as the vacuum decreased, and it drew a relationship between fracture mechanisms and mechanical properties of the composite under different modes of loading as a result of the porosity effects. Finally, in order to accurately quantify porosity percentages included in the samples of different vacuum levels, a comparison was made between the parameters and percentages resulted from the nondestructive evaluation and mechanical testing and the features resulted from fractography and serial sectioning.
基金Supported by The Tirol Kliniken,Innsbruck,Austria
文摘Psychosocial factors are important elements in the assessment and follow-up care for vascularized composite allotransplantation(VCA) and require multidisciplinary evaluation protocols. This review will highlight differences between VCA with solid organ transplantation(SOT), provide information on the psychosocial selection of VCA candidates, ethical issues, psychological outcomes, and on the need for multicenter research. VCA is primarily a life-enhancing procedure to improve recipients' quality of life and psychological well-being and it represents a potential option to provide reproduction in case of penile or uterine transplantation. The risk benefit ratio is distinctly different than SOT with candidates desiring life enhancing outcomes including improved body image, return to occupations, restored touch, and for uterine transplant, pregnancy. The Chauvet Workgroup has been convened with membership from a number of transplant centers to address these issues and to call for multicenter research. A multicenter research network would share similar evaluation approaches so that meaningful research on psychosocial variables could inform the transplant community and patients about factors that increase risk of non-adherence and other adverse psychosocial and medical outcomes.
