Low-frequency signals have been proven valuable in the fields of target detection and geological exploration.Nevertheless,the practical implementation of these signals is hindered by large antenna diameters,limiting t...Low-frequency signals have been proven valuable in the fields of target detection and geological exploration.Nevertheless,the practical implementation of these signals is hindered by large antenna diameters,limiting their potential applications.Therefore,it is imperative to study the creation of lowfrequency signals using antennas with suitable dimensions.In contrast to conventional mechanical antenna techniques,our study generates low-frequency signals in the spatial domain utilizing the principle of the Doppler effect.We also defines the antenna array architecture,the timing sequency,and the radiating element signal waveform,and provides experimental prototypes including 8/64 antennas based on earlier research.In the conducted experiments,121 MHz,40 MHz,and 10 kHz composite signals are generated by 156 MHz radiating element signals.The composite signal spectrum matches the simulations,proving our low-frequency signal generating method works.This holds significant implications for research on generating low-frequency signals with small-sized antennas.展开更多
In this study we performed a classical spectrum analysis of seismic waveforms recorded at far field stations of the great MW7.9 Wenchuan earthquake to observe the shifts of the corner frequency with azimuth due to the...In this study we performed a classical spectrum analysis of seismic waveforms recorded at far field stations of the great MW7.9 Wenchuan earthquake to observe the shifts of the corner frequency with azimuth due to the Doppler effect.Our results show that this damaging great earthquake had a dominating rupture propagation direction of 64.0°.The equivalent radius of the fault rupture surface was estimated to be 33 km,yielding the rupture area of about 3 500 km2.Thus the length of the rupture fault surface is about 230 km if the depth（or width） extent is 15 km.The computer program developed in this study can quickly provide the information about the source of a future large（damaging） earthquake,which could be very useful for predicting aftershocks and planning the rescue operations.展开更多
Observed rainfall is a very essential parameter for the analysis of rainfall,day to day weather forecast and its validation.The observed rainfall data is only available from five observatories of IMD;while no rainfall...Observed rainfall is a very essential parameter for the analysis of rainfall,day to day weather forecast and its validation.The observed rainfall data is only available from five observatories of IMD;while no rainfall data is available at various important locations in and around Delhi-NCR.However,the 24-hour rainfall data observed by Doppler Weather Radar(DWR)for entire Delhi and surrounding region(up to 150 km)is readily available in a pictorial form.In this paper,efforts have been made to derive/estimate the rainfall at desired locations using DWR hydrological products.Firstly,the rainfall at desired locations has been estimated from the precipitation accumulation product(PAC)of the DWR using image processing in Python language.After this,a linear regression model using the least square method has been developed in R language.Estimated and observed rainfall data of year 2018(July,August and September)was used to train the model.After this,the model was tested on rainfall data of year 2019(July,August and September)and validated.With the use of linear regression model,the error in mean rainfall estimation reduced by 46.58% and the error in max rainfall estimation reduced by 84.53% for the year 2019.The error in mean rainfall estimation reduced by 81.36% and the error in max rainfall estimation reduced by 33.81%for the year 2018.Thus,the rainfall can be estimated with a fair degree of accuracy at desired locations within the range of the Doppler Weather Radar using the radar rainfall products and the developed linear regression model.展开更多
The proposed Doppler measurement technique shows that the Doppler measurements can be accomplished by a single pulse with multiple frequency components through optical fibre delay lines.Range and velocity ambiguity ca...The proposed Doppler measurement technique shows that the Doppler measurements can be accomplished by a single pulse with multiple frequency components through optical fibre delay lines.Range and velocity ambiguity can be removed,and the velocity resolution can be improved dramatically by using long optical fibre delay lines.Furthermore,the velocity resolution can be modified by adjusting the length of optical fibre delay lines.In addition,the proposed radar can achieve high range resolution by using a single wideband pulse.As a result,the new approach can improve radar performance significantly.展开更多
基金Science and Technology Project of Aerospace Information Research Institute,Chinese Academy of Sciences(Y910340Z2F)Science and Technology Project of BBEF(E3E2010201)。
文摘Low-frequency signals have been proven valuable in the fields of target detection and geological exploration.Nevertheless,the practical implementation of these signals is hindered by large antenna diameters,limiting their potential applications.Therefore,it is imperative to study the creation of lowfrequency signals using antennas with suitable dimensions.In contrast to conventional mechanical antenna techniques,our study generates low-frequency signals in the spatial domain utilizing the principle of the Doppler effect.We also defines the antenna array architecture,the timing sequency,and the radiating element signal waveform,and provides experimental prototypes including 8/64 antennas based on earlier research.In the conducted experiments,121 MHz,40 MHz,and 10 kHz composite signals are generated by 156 MHz radiating element signals.The composite signal spectrum matches the simulations,proving our low-frequency signal generating method works.This holds significant implications for research on generating low-frequency signals with small-sized antennas.
文摘In this study we performed a classical spectrum analysis of seismic waveforms recorded at far field stations of the great MW7.9 Wenchuan earthquake to observe the shifts of the corner frequency with azimuth due to the Doppler effect.Our results show that this damaging great earthquake had a dominating rupture propagation direction of 64.0°.The equivalent radius of the fault rupture surface was estimated to be 33 km,yielding the rupture area of about 3 500 km2.Thus the length of the rupture fault surface is about 230 km if the depth（or width） extent is 15 km.The computer program developed in this study can quickly provide the information about the source of a future large（damaging） earthquake,which could be very useful for predicting aftershocks and planning the rescue operations.
文摘Observed rainfall is a very essential parameter for the analysis of rainfall,day to day weather forecast and its validation.The observed rainfall data is only available from five observatories of IMD;while no rainfall data is available at various important locations in and around Delhi-NCR.However,the 24-hour rainfall data observed by Doppler Weather Radar(DWR)for entire Delhi and surrounding region(up to 150 km)is readily available in a pictorial form.In this paper,efforts have been made to derive/estimate the rainfall at desired locations using DWR hydrological products.Firstly,the rainfall at desired locations has been estimated from the precipitation accumulation product(PAC)of the DWR using image processing in Python language.After this,a linear regression model using the least square method has been developed in R language.Estimated and observed rainfall data of year 2018(July,August and September)was used to train the model.After this,the model was tested on rainfall data of year 2019(July,August and September)and validated.With the use of linear regression model,the error in mean rainfall estimation reduced by 46.58% and the error in max rainfall estimation reduced by 84.53% for the year 2019.The error in mean rainfall estimation reduced by 81.36% and the error in max rainfall estimation reduced by 33.81%for the year 2018.Thus,the rainfall can be estimated with a fair degree of accuracy at desired locations within the range of the Doppler Weather Radar using the radar rainfall products and the developed linear regression model.
文摘The proposed Doppler measurement technique shows that the Doppler measurements can be accomplished by a single pulse with multiple frequency components through optical fibre delay lines.Range and velocity ambiguity can be removed,and the velocity resolution can be improved dramatically by using long optical fibre delay lines.Furthermore,the velocity resolution can be modified by adjusting the length of optical fibre delay lines.In addition,the proposed radar can achieve high range resolution by using a single wideband pulse.As a result,the new approach can improve radar performance significantly.
