A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high vol...A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high voltage electrodes with a uniform gap length of 5 ram. The self breakdown and triggered breakdown performance of the switch are reported. Both the delay time and jitter decrease with the increase in the trigger voltage, switching coefficient and the decrease in the trigger isolating resistor. The delay time of the switch is about 40 ns, and the jitter is less than 2 ns when charged with 4-85 kV and triggered by a voltage pule of -75 kV. The inductance of the switch is about 30 nH.展开更多
A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharg...A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharging channel through a parasitic capacitance coupling. The jitter of the switch is reduced by several short-distance gas gaps in series, and its inductance is reduced by a multi-channel discharge on account of the inductance isolation between the coils of the spring ring electrode. The experimental results indicate that the switch is of low inductance (15-30 nH), low jitter (-3 ns), and stable breakdown performance展开更多
With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A mag...With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A magnetic phase-coding meta-atom(MPM)is formed by the heterogeneous integration of La:YIG magneto-optical(MO)materials and Si microstructures.The MPM couples the magnetic induction phase of spin states with the propagation phase and can simultaneously satisfy the required output phase for dual frequencies under various external magnetic fields to realize the dynamic beam steering among multiple channels at 0.25 and 0.5 THz.The energy ratio of the target direction can reach 96.5%,and the nonreciprocal one-way transmission with a max isolation of 29.8 dB is realized due to the nonreciprocal phase shift of the MO layer.This nonreciprocal mechanism of magnetic induction reshaping of wavefront significantly holds promise for advancing integrated multi-functional THz devices with the characteristics of low-crosstalk,multi-channel,and multi-frequency,and has great potential to promote the development of THz large-capacity and high-speed communication.展开更多
Given the importance of sentiment analysis in diverse environments,various methods are used for image sentiment analysis,including contextual sentiment analysis that utilizes character and scene relationships.However,...Given the importance of sentiment analysis in diverse environments,various methods are used for image sentiment analysis,including contextual sentiment analysis that utilizes character and scene relationships.However,most existing works employ character faces in conjunction with context,yet lack the capacity to analyze the emotions of characters in unconstrained environments,such as when their faces are obscured or blurred.Accordingly,this article presents the Adaptive Multi-Channel Sentiment Analysis Network(AMSA),a contextual image sentiment analysis framework,which consists of three channels:body,face,and context.AMSA employs Multi-task Cascaded Convolutional Networks(MTCNN)to detect faces within body frames;if detected,facial features are extracted and fused with body and context information for emotion recognition.If not,the model leverages body and context features alone.Meanwhile,to address class imbalance in the EMOTIC dataset,Focal Loss is introduced to improve classification performance,especially for minority emotion categories.Experimental results have shown that certain sentiment categories with lower representation in the dataset demonstrate leading classification accuracy,the AMSA yields a 2.53%increase compared with state-of-the-art methods.展开更多
Rotational feeding combined with shift feeding electrochemical trepanning(RF-SF ECTr)is an effective method for machining aeroengine blisks.However,given the variable relative motion of the electrodes and the complex ...Rotational feeding combined with shift feeding electrochemical trepanning(RF-SF ECTr)is an effective method for machining aeroengine blisks.However,given the variable relative motion of the electrodes and the complex flow channels around the bending and twisting blades,the accessibility and uniformity of the flow field are poor in blisk RF-SF ECTr using the traditional electrolyte supply(TES)mode,resulting in poor machining stability and low machining efficiency.To improve the distribution of the flow field,a new multi-channel electrolyte supply(MCES)mode is proposed for blisk RF-SF ECTr,in which the position and volume of the electrolyte supply are controlled effectively by setting multiple inlet channels in the liquid inlet area.A flow-field simulation comparison between TES and MCES shows that better accessibility and uniformity of the flow-field distribution are achieved under MCES.To clarify further the flow-field distribution characteristics under RF-SF ECTr,a series of flow-field simulations was conducted at different machining depths.Based on the obtained dynamic change law for the flow field,to enhance further its uniformity and accessibility,a global coverage strategy for the electrolyte supply and a flow-field structure optimization method for MCES are proposed,which involve optimizing the number,diameter,and location of the inlet channels.After many simulations,the optimal MCES structure was achieved whereby the electrolyte covers all positions effectively in the processing area.To verify the proposed method as effective and correct,a series of RF-SF ECTr experiments was carried out.Under the optimized MCES mode,the feeding rate was increased from 0.8 mm/min with the TES mode to 2.0 mm/min,and the processing stability and efficiency were improved significantly.The methods presented here offer an effective guide for flow-field optimization when machining other components with complex spatial structures.展开更多
Vortex beams carrying orbital angular momentum(OAM)are of great significance for high-capacity communication and super-resolution imaging.However,there is a huge gap between the free-space vortices(FVs)and plasmonic v...Vortex beams carrying orbital angular momentum(OAM)are of great significance for high-capacity communication and super-resolution imaging.However,there is a huge gap between the free-space vortices(FVs)and plasmonic vortices(PVs)on chips,and active manipulation as well as multiplexing in more channels have become a pressing demand.In this work,we demonstrate a terahertz(THz)cascaded metadevice composed of a helical plasmonic metasurface,a liquid crystal(LC)layer,and a helical dielectric metasurface.By spin-orbital angular momentum coupling and photon state superposition,PVs and FVs are generated with mode purity of over 85%on average.Due to the inversion asymmetric design of the helical metasurfaces,the parity symmetry breaking of OAM is realized(the topological charge numbers no longer occur in positive and negative pairs,but all are positive),generating 6 independent channels associated with the decoupled spin states and the near-/far-field positions.Moreover,by the LC integration,dynamic mode switching and energy distribution can be realized,finally obtaining up to 12 modes with a modulation ratio of above 70%.This active tuning and multi-channel multiplexing metadevice establishes a bridge connection between the PVs and FVs,exhibiting promising applications in THz communication,intelligent perception,and information processing.展开更多
BACKGROUND Radical gastrectomy(RGE)for gastric carcinoma(GC)has exerted definite therapeutic efficacy in treating patients with GC.However,a notable risk of postoperative complications(POCs)persists among middle-aged ...BACKGROUND Radical gastrectomy(RGE)for gastric carcinoma(GC)has exerted definite therapeutic efficacy in treating patients with GC.However,a notable risk of postoperative complications(POCs)persists among middle-aged and elderly patients with compromised physiological functions.Hence,developing and implementing reliable nursing interventions to optimize the comprehensive management of these patients is deemed imperative.AIM To analyze the association of multi-channel continuous nursing intervention with POCs,negative emotions(NEs),and quality of life(QoL)of patients undergoing RGE for GC.METHODS This retrospective study selected 99 patients who underwent RGE for GC in our hospital from May 2020 to May 2023.Participants were categorized into the control(n=49 cases)and research groups(n=50 cases)receiving routine and multi-channel continuous nursing care,respectively.Comparative analysis involved data on postoperative rehabilitation(time to first anal exhaust,oral feeding and ambulation,and hospital stay),complications(nausea and vomiting,delayed gastric emptying,and abdominal distension),NEs[Self-rating Anxiety(SAS)/Depression Scale(SDS)],treatment compliance,self-efficacy,and QoL[World Health Organization QoL Brief Version(WHOQOL-BREF)].RESULTS Compared to the control group,the research group demonstrated earlier first postoperative anal exhaust,oral feeding,and ambulation,shorter hospital stay,lower POC rate,and more reduced SAS and SDS scores postintervention,which was significantly lower than the baseline.The treatment compliance scores were significantly higher in the research group than in the control group in terms of medication adherence,daily exercise,reasonable diet,and regular review.Further,the research group demonstrated increased self-efficacy scores in terms of positive attitude,self-stress relief,and self-decision-making,as well as the overall score postintervention,which were higher than the control group.Moreover,the research group reported notably higher WHOQOL-BREF scores in domains such as physiology,psychology,social relations,and environment.CONCLUSION Multi-channel continuous nursing intervention prevents POCs in patients undergoing RGE for GC as well as significantly alleviates patients’NEs and boosts their QoL.展开更多
In order to improve the exploration effect of deep non-ferrous mineral resources, multi-channel observation methods for induced polarization （IP） electrical sounding data and their inversion imaging technology are s...In order to improve the exploration effect of deep non-ferrous mineral resources, multi-channel observation methods for induced polarization （IP） electrical sounding data and their inversion imaging technology are studied. First of all, four multi-channel observation methods are developed based on conventional IP electrical method, namely three-electrode and four-electrode arrays of unilateral and bilateral current transmitting. Then the maximum smoothness constrained inversion method of the least squares sense for IP electrical sounding data is proposed, and the inversion software is programmed. Finally, the simulation and inversion results of geo-electrical model for the proposed observation methods are analyzed. And the comparison results show that three-electrode array of bilateral current transmitting gives the best result, but the intensity in field work is larger than others; unilateral three-electrode and four-electrode arrays give the better results. Taking detection results and convenience of field exploration work into consideration, these two methods are more suitable for practical application; bilateral observation method of four-electrode array is not suitable for the detection of the steep ore bodies.展开更多
A data acquisition system based on LabVIEW and NI PXI-5105 is presented for multi-channel data acquisition. It can realize the functions of parameter setting, data acquisition and storage, waveform display and data an...A data acquisition system based on LabVIEW and NI PXI-5105 is presented for multi-channel data acquisition. It can realize the functions of parameter setting, data acquisition and storage, waveform display and data analysis using LabVIEW and NI-SCOPE device driver. The advantages of the system are that the setting is convenient, the operation is easy, the interface is friendly and the functions are practical. The experiment results show that the system has good stability and high reliability and is a powerful tool for multi-channel data acquisition.展开更多
A channel allocation algorithm based on the maximum independent set is proposed to decrease network conflict and improve network performance. First, a channel allocation model is formulated and a series of the maximum...A channel allocation algorithm based on the maximum independent set is proposed to decrease network conflict and improve network performance. First, a channel allocation model is formulated and a series of the maximum independent sets （MISs） are obtained from a contention graph by the proposed approximation algorithm with low complexity. Then, a weighted contention graph is obtained using the number of contention vertices between two MISs as a weighted value. Links are allocated to channels by the weighted contention graph to minimize conflicts between independent sets. Finally, after channel allocation, each node allocates network interface cards （NICs） to links that are allocated channels according to the queue lengths of NICs. Simulations are conducted to evaluate the proposed algorithm. The results show that the proposed algorithm significantly improves the network throughput and decreases the end to end delay.展开更多
为降低通信冲突和信道干扰,对Mult-i Radio Mult-i Channel传感器网络无冲突信道进行研究,结果证实在网络通信半径大于3倍的网络最大功率通信半径的前提下,Sensor节点规模满足2倍网络功率级数加1的环境下,网络无冲突信道分配的信道数达...为降低通信冲突和信道干扰,对Mult-i Radio Mult-i Channel传感器网络无冲突信道进行研究,结果证实在网络通信半径大于3倍的网络最大功率通信半径的前提下,Sensor节点规模满足2倍网络功率级数加1的环境下,网络无冲突信道分配的信道数达到网络信道冲突图的最大值。文章通过对无冲突信道算法的运用,最终证实其可以有效地提高传感器网络的工作效率,大幅度提升网络的吞吐量。展开更多
The problem of two order statistics detection schemes for the detection of a spatially distributed target in white Gaussian noise are studied.When the number of strong scattering cells is known,we first show an optima...The problem of two order statistics detection schemes for the detection of a spatially distributed target in white Gaussian noise are studied.When the number of strong scattering cells is known,we first show an optimal detector,which requires many processing channels.The structure of such optimal detector is complex.Therefore,a simpler quasi-optimal detector is then introduced.The quasi-optimal detector,called the strong scattering cells’ number dependent order statistics（SND-OS） detector,takes the form of an average of maximum strong scattering cells with a known number.If the number of strong scattering cells is unknown in real situation,the multi-channel order statistics（MC-OS） detector is used.In each channel,a various number of maximums scattered from target are averaged.Then,the false alarm probability analysis and thresholds sets for each channel are given,following the detection results presented by means of Monte Carlo simulation strategy based on simulated target model and three measured targets.In particular,the theoretical analysis and simulation results highlight that the MC-OS detector can efficiently detect range-spread targets in white Gaussian noise.展开更多
A conventional multi-channel pulse amplitude analyzer acquires single energy spectrum,but provides no information on its tendency with time.To address the limitation,we propose a scheme of time-sharing multichannel pu...A conventional multi-channel pulse amplitude analyzer acquires single energy spectrum,but provides no information on its tendency with time.To address the limitation,we propose a scheme of time-sharing multichannel pulse amplitude analyzer(TSMCA).A dual-port random access memory is divided into two storage spaces,one for current energy spectrum data acquisition and another for previous energy spectrum data storage.The two tasks can be performed simultaneously,and the time-related variation tendency of energy spectrum can be obtained.A prototype system of TSMCA is designed.It performs nicely,with maximum channel number of 4096 in capacity of 2^(32)/Ch,minimal time-sharing slice of 25 ms,the differential nonlinearity of <1.5%,and the integral nonlinearity of <0.3%.展开更多
There are well-established chemical and turbidity anomalies in the plumes occurring vicinity of hydrothermal vents, which are used to indicate their existence and locations. We here develop a small, accurate multi-cha...There are well-established chemical and turbidity anomalies in the plumes occurring vicinity of hydrothermal vents, which are used to indicate their existence and locations. We here develop a small, accurate multi-channel chemical sensor to detect such anomalies which can be used in deep-sea at depths of more than 4 000 m. The design allowed five all-solid-state electrodes to be mounted on it and each (apart from one reference electrode) could be changed according to chemicals to be measured. Two experiments were conducted using the chemical sensors. The first was a shallow-sea trial which included sample measurements and in situ monitoring. pH, Eh, CO3^2- and SO4^2- electrodes were utilized to demonstrate that the chemical sensor was accurate and stable outside the laboratory. In the second experiment, the chemical sensor was integrated with pH, Eh, CO3^2- and H2S electrodes, and was used in 29 scans of the seabed along the Southwest Indian Ridge (SWIR) to detect hydrothermal vents, from which 27 sets of valid data were obtained. Hydrothermal vents were identified by analyzing the chemical anomalies, the primary judging criteria were decreasing voltages of Eh and H2S, matched by increasing voltages of pH and CO3^2- . We proposed that simultaneous detection of changes in these parameters will indicate a hydrothermal vent. Amongst the 27 valid sets of data, five potential hydrothermal vents were targeted using the proposed method. We suggest that our sensors could be widely employed by marine scientists.展开更多
This paper investigates the receding horizon state estimation for the linear discrete-time system with multi-channel observation delays. The receding horizon estimation is designed by the reorganized observation techn...This paper investigates the receding horizon state estimation for the linear discrete-time system with multi-channel observation delays. The receding horizon estimation is designed by the reorganized observation technique and the linear unbiased estimation method. The estimation gains are developed by solving a set of Riccati equations, and a stability result about the state estimation is shown. Finally, an example is given to illustrate the efficiency of the receding horizon state estimation.展开更多
The accurate prediction of formation pressure is important in oil/gas exploration and development.However,the achievement of this goal remains challenging,due to insufficient logging data and the low predictive data a...The accurate prediction of formation pressure is important in oil/gas exploration and development.However,the achievement of this goal remains challenging,due to insufficient logging data and the low predictive data accuracy from seismic data.In this work,a case study was carried out in the Baima area of Wulong,in order to develop a workflow for accurately predicting shale gas formation pressure.The multi-channel stack method was first used,as well as the inversion of single-channel seismic data,to construct velocity and density models of the formation.Combined with the existing welllogging data,the velocity and density models of the whole well section were established.The shale gas formation pressure was then estimated using the Eaton method.The results show that the multi-channel seismic stacking method has a higher accuracy than the inversion of the formation velocity obtained by the single-channel seismic method.The discrepancies between our predicted formation pressure and the actual formation pressure measurement are within an acceptable range,indicating that our workflow is effective.展开更多
Sleep stage classification plays a significant role in the accurate diagnosis and treatment of sleep-related diseases.This study aims to develop an efficient deep learning based scheme for correctly identifying sleep ...Sleep stage classification plays a significant role in the accurate diagnosis and treatment of sleep-related diseases.This study aims to develop an efficient deep learning based scheme for correctly identifying sleep stages using multi-biological signals such as electroencephalography(EEG),electrocardiogram(ECG),electromyogram(EMG),and electrooculogram(EOG).Most of the prior studies in sleep stage classification focus on hand-crafted feature extraction methods.Traditional hand-crafted feature extraction methods choose features manually from raw data,which is tedious,and these features are limited in their ability to balance efficiency and accuracy.Moreover,most of the existing works on sleep staging are either single channel(a single-lead EEG may not contain enough information)or only EEG signal based which can not reveal more complicated physical features for reliable classification of various sleep stages.This study proposes an approach to combine Convolutional Neural Networks(CNNs)and Gated Recurrent Units(GRUs)that can discover hidden features from multi-biological signal data to recognize the different sleep stages efficiently.In the proposed scheme,the CNN is designed to extract concealed features from the multi-biological signals,and the GRU is employed to automatically learn the transition rules among different sleep stages.After that,the softmax layers are used to classify various sleep stages.The proposed method was tested on two publicly available databases:Sleep Heart Health Study(SHHS)and St.Vincent’s University Hospital/University College Dublin Sleep Apnoea(UCDDB).The experimental results reveal that the proposed model yields better performance compared to state-of-the-art works.Our proposed scheme will assist in building a new system to deal with multi-channel or multi-modal signal processing tasks in various applications.展开更多
Recently, single carrier block transmission(SCBT) has received much attention in high-rate phase-coherent underwater acoustic communication.However,minimum-mean-square-error(MMSE) linear FDE may suffer performance los...Recently, single carrier block transmission(SCBT) has received much attention in high-rate phase-coherent underwater acoustic communication.However,minimum-mean-square-error(MMSE) linear FDE may suffer performance loss in the severely time dispersive underwater acoustic channel. To combat the channel distortion, a novel multi-channel receiver with maximum ratio combining and a low complex T/4 fractional iterative frequency domain equalization(FDE) is investigated to improve diversity gain and the bit error rate(BER) performance. The proposed method has been verified by the real data from a lake underwater acoustic communication test in November 2011. At 1.8 km, the useful data rates are around 1500 and 3000 bits/s for BPSK and QPSK respectively. The results show the improvements of system performance. Compared with MMSE FDE system, the output SNR improvement is 6.9 d B, and the BER is from 10-3 to no error bits for BPSK. The output SNR improvement is 5.3 d B, and the BER is from 1.91×10-2 to 2.2×10-4for QPSK.展开更多
Accurately detecting the arrival time of a channel wave in a coal seam is very important for in-seam seismic data processing. The arrival time greatly affects the accuracy of the channel wave inversion and the compute...Accurately detecting the arrival time of a channel wave in a coal seam is very important for in-seam seismic data processing. The arrival time greatly affects the accuracy of the channel wave inversion and the computed tomography （CT） result. However, because the signal-to-noise ratio of in-seam seismic data is reduced by the long wavelength and strong frequency dispersion, accurately timing the arrival of channel waves is extremely difficult. For this purpose, we propose a method that automatically picks up the arrival time of channel waves based on multi-channel constraints. We first estimate the Jaccard similarity coefficient of two ray paths, then apply it as a weight coefficient for stacking the multi- channel dispersion spectra. The reasonableness and effectiveness of the proposed method is verified in an actual data application. Most importantly, the method increases the degree of automation and the pickup precision of the channel-wave arrival time.展开更多
To study multi-radio multi-channel （MR-MC） Ad Hoc networks based on 802.11, an efficient cross-layer routing protocol with the function of joint channel assignment, called joint channel assignment and cross-layer ro...To study multi-radio multi-channel （MR-MC） Ad Hoc networks based on 802.11, an efficient cross-layer routing protocol with the function of joint channel assignment, called joint channel assignment and cross-layer routing （JCACR）, is presented. Firstly, this paper introduces a new concept called channel utilization percentage （CUP）, which is for measuring the contention level of different channels in a node’s neighborhood, and deduces its optimal value for determining whether a channel is overloaded or not. Then, a metric parameter named channel selection metric （CSM） is designed, which actually reffects not only the channel status but also corresponding node’s capacity to seize it. JCACR evaluates channel assignment by CSM, performs a local optimization by assigning each node a channel with the smaller CSM value, and changes the working channel dynamically when the channel is overloaded. Therefore, the network load balancing can be achieved. In addition, simulation shows that, when compared with the protocol of weighted cumulative expected transfer time （WCETT）, the new protocol can improve the network throughput and reduce the end-to-end average delay with fewer overheads.展开更多
基金supported by National Natural Science Foundation of China(Nos.50477019,50637010)the State Key Laboratory of Electrical Insulation and Power Equipment of China(EIPE.09207)
文摘A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high voltage electrodes with a uniform gap length of 5 ram. The self breakdown and triggered breakdown performance of the switch are reported. Both the delay time and jitter decrease with the increase in the trigger voltage, switching coefficient and the decrease in the trigger isolating resistor. The delay time of the switch is about 40 ns, and the jitter is less than 2 ns when charged with 4-85 kV and triggered by a voltage pule of -75 kV. The inductance of the switch is about 30 nH.
基金This work was supported by the National Natural Science Foundation of China, Grant No. 10035020
文摘A coaxial multi-gap multi-channel spark switch with stainless-steel-spring ring gap electrodes is designed and investigated. The switch is triggered by a pulse applied to the cylindrical electrode outside the discharging channel through a parasitic capacitance coupling. The jitter of the switch is reduced by several short-distance gas gaps in series, and its inductance is reduced by a multi-channel discharge on account of the inductance isolation between the coils of the spring ring electrode. The experimental results indicate that the switch is of low inductance (15-30 nH), low jitter (-3 ns), and stable breakdown performance
基金supported by the National Natural Science Foun-dation of China(Grant Nos.62371258,62335012,62205160,and 62435010)the Tianjin Youth Science and Technology Talent Project(Grant No.QN20230227)+1 种基金the Natural Science Foundation of Tianjin(Grant No.24JCYBJC01860)the Fundamental Research Funds for the Central Universities,Nan-kai University(Grant No.075-63253215).
文摘With the urgently increasing demand for high-speed and large-capacity communication trans-mission,there remains a critical need for tunable terahertz(THz)devices with multi-channel in 5G/6G communication systems.A magnetic phase-coding meta-atom(MPM)is formed by the heterogeneous integration of La:YIG magneto-optical(MO)materials and Si microstructures.The MPM couples the magnetic induction phase of spin states with the propagation phase and can simultaneously satisfy the required output phase for dual frequencies under various external magnetic fields to realize the dynamic beam steering among multiple channels at 0.25 and 0.5 THz.The energy ratio of the target direction can reach 96.5%,and the nonreciprocal one-way transmission with a max isolation of 29.8 dB is realized due to the nonreciprocal phase shift of the MO layer.This nonreciprocal mechanism of magnetic induction reshaping of wavefront significantly holds promise for advancing integrated multi-functional THz devices with the characteristics of low-crosstalk,multi-channel,and multi-frequency,and has great potential to promote the development of THz large-capacity and high-speed communication.
文摘Given the importance of sentiment analysis in diverse environments,various methods are used for image sentiment analysis,including contextual sentiment analysis that utilizes character and scene relationships.However,most existing works employ character faces in conjunction with context,yet lack the capacity to analyze the emotions of characters in unconstrained environments,such as when their faces are obscured or blurred.Accordingly,this article presents the Adaptive Multi-Channel Sentiment Analysis Network(AMSA),a contextual image sentiment analysis framework,which consists of three channels:body,face,and context.AMSA employs Multi-task Cascaded Convolutional Networks(MTCNN)to detect faces within body frames;if detected,facial features are extracted and fused with body and context information for emotion recognition.If not,the model leverages body and context features alone.Meanwhile,to address class imbalance in the EMOTIC dataset,Focal Loss is introduced to improve classification performance,especially for minority emotion categories.Experimental results have shown that certain sentiment categories with lower representation in the dataset demonstrate leading classification accuracy,the AMSA yields a 2.53%increase compared with state-of-the-art methods.
基金Supported by National Natural Science Foundation of China(Grant Nos.52275435,52075465,52375519)Open Fund Project of Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology(Grant No.JSKL2324K03)Key Research and Development Program of Hunan Province of China(Grant No.2023GK2026)。
文摘Rotational feeding combined with shift feeding electrochemical trepanning(RF-SF ECTr)is an effective method for machining aeroengine blisks.However,given the variable relative motion of the electrodes and the complex flow channels around the bending and twisting blades,the accessibility and uniformity of the flow field are poor in blisk RF-SF ECTr using the traditional electrolyte supply(TES)mode,resulting in poor machining stability and low machining efficiency.To improve the distribution of the flow field,a new multi-channel electrolyte supply(MCES)mode is proposed for blisk RF-SF ECTr,in which the position and volume of the electrolyte supply are controlled effectively by setting multiple inlet channels in the liquid inlet area.A flow-field simulation comparison between TES and MCES shows that better accessibility and uniformity of the flow-field distribution are achieved under MCES.To clarify further the flow-field distribution characteristics under RF-SF ECTr,a series of flow-field simulations was conducted at different machining depths.Based on the obtained dynamic change law for the flow field,to enhance further its uniformity and accessibility,a global coverage strategy for the electrolyte supply and a flow-field structure optimization method for MCES are proposed,which involve optimizing the number,diameter,and location of the inlet channels.After many simulations,the optimal MCES structure was achieved whereby the electrolyte covers all positions effectively in the processing area.To verify the proposed method as effective and correct,a series of RF-SF ECTr experiments was carried out.Under the optimized MCES mode,the feeding rate was increased from 0.8 mm/min with the TES mode to 2.0 mm/min,and the processing stability and efficiency were improved significantly.The methods presented here offer an effective guide for flow-field optimization when machining other components with complex spatial structures.
基金supported by the National Natural Science Foundation of China(62335012,62371258,624B2075,62205160,62435010)Young Scientific and Technological Talents in Tianjin(QN20230227)Fundamental Research Funds for the Central Universities,Nankai University(63231159).
文摘Vortex beams carrying orbital angular momentum(OAM)are of great significance for high-capacity communication and super-resolution imaging.However,there is a huge gap between the free-space vortices(FVs)and plasmonic vortices(PVs)on chips,and active manipulation as well as multiplexing in more channels have become a pressing demand.In this work,we demonstrate a terahertz(THz)cascaded metadevice composed of a helical plasmonic metasurface,a liquid crystal(LC)layer,and a helical dielectric metasurface.By spin-orbital angular momentum coupling and photon state superposition,PVs and FVs are generated with mode purity of over 85%on average.Due to the inversion asymmetric design of the helical metasurfaces,the parity symmetry breaking of OAM is realized(the topological charge numbers no longer occur in positive and negative pairs,but all are positive),generating 6 independent channels associated with the decoupled spin states and the near-/far-field positions.Moreover,by the LC integration,dynamic mode switching and energy distribution can be realized,finally obtaining up to 12 modes with a modulation ratio of above 70%.This active tuning and multi-channel multiplexing metadevice establishes a bridge connection between the PVs and FVs,exhibiting promising applications in THz communication,intelligent perception,and information processing.
文摘BACKGROUND Radical gastrectomy(RGE)for gastric carcinoma(GC)has exerted definite therapeutic efficacy in treating patients with GC.However,a notable risk of postoperative complications(POCs)persists among middle-aged and elderly patients with compromised physiological functions.Hence,developing and implementing reliable nursing interventions to optimize the comprehensive management of these patients is deemed imperative.AIM To analyze the association of multi-channel continuous nursing intervention with POCs,negative emotions(NEs),and quality of life(QoL)of patients undergoing RGE for GC.METHODS This retrospective study selected 99 patients who underwent RGE for GC in our hospital from May 2020 to May 2023.Participants were categorized into the control(n=49 cases)and research groups(n=50 cases)receiving routine and multi-channel continuous nursing care,respectively.Comparative analysis involved data on postoperative rehabilitation(time to first anal exhaust,oral feeding and ambulation,and hospital stay),complications(nausea and vomiting,delayed gastric emptying,and abdominal distension),NEs[Self-rating Anxiety(SAS)/Depression Scale(SDS)],treatment compliance,self-efficacy,and QoL[World Health Organization QoL Brief Version(WHOQOL-BREF)].RESULTS Compared to the control group,the research group demonstrated earlier first postoperative anal exhaust,oral feeding,and ambulation,shorter hospital stay,lower POC rate,and more reduced SAS and SDS scores postintervention,which was significantly lower than the baseline.The treatment compliance scores were significantly higher in the research group than in the control group in terms of medication adherence,daily exercise,reasonable diet,and regular review.Further,the research group demonstrated increased self-efficacy scores in terms of positive attitude,self-stress relief,and self-decision-making,as well as the overall score postintervention,which were higher than the control group.Moreover,the research group reported notably higher WHOQOL-BREF scores in domains such as physiology,psychology,social relations,and environment.CONCLUSION Multi-channel continuous nursing intervention prevents POCs in patients undergoing RGE for GC as well as significantly alleviates patients’NEs and boosts their QoL.
基金Project(41174102)supported by the National Natural Science Foundation of China
文摘In order to improve the exploration effect of deep non-ferrous mineral resources, multi-channel observation methods for induced polarization （IP） electrical sounding data and their inversion imaging technology are studied. First of all, four multi-channel observation methods are developed based on conventional IP electrical method, namely three-electrode and four-electrode arrays of unilateral and bilateral current transmitting. Then the maximum smoothness constrained inversion method of the least squares sense for IP electrical sounding data is proposed, and the inversion software is programmed. Finally, the simulation and inversion results of geo-electrical model for the proposed observation methods are analyzed. And the comparison results show that three-electrode array of bilateral current transmitting gives the best result, but the intensity in field work is larger than others; unilateral three-electrode and four-electrode arrays give the better results. Taking detection results and convenience of field exploration work into consideration, these two methods are more suitable for practical application; bilateral observation method of four-electrode array is not suitable for the detection of the steep ore bodies.
文摘A data acquisition system based on LabVIEW and NI PXI-5105 is presented for multi-channel data acquisition. It can realize the functions of parameter setting, data acquisition and storage, waveform display and data analysis using LabVIEW and NI-SCOPE device driver. The advantages of the system are that the setting is convenient, the operation is easy, the interface is friendly and the functions are practical. The experiment results show that the system has good stability and high reliability and is a powerful tool for multi-channel data acquisition.
基金The National High Technology Research and Development Program of China(863 Program)(No.2013AA013601)Prospective Research Project on Future Netw orks of Jiangsu Future Netw orks Innovation Institute(No.BY2013095-1-18)
文摘A channel allocation algorithm based on the maximum independent set is proposed to decrease network conflict and improve network performance. First, a channel allocation model is formulated and a series of the maximum independent sets （MISs） are obtained from a contention graph by the proposed approximation algorithm with low complexity. Then, a weighted contention graph is obtained using the number of contention vertices between two MISs as a weighted value. Links are allocated to channels by the weighted contention graph to minimize conflicts between independent sets. Finally, after channel allocation, each node allocates network interface cards （NICs） to links that are allocated channels according to the queue lengths of NICs. Simulations are conducted to evaluate the proposed algorithm. The results show that the proposed algorithm significantly improves the network throughput and decreases the end to end delay.
文摘为降低通信冲突和信道干扰,对Mult-i Radio Mult-i Channel传感器网络无冲突信道进行研究,结果证实在网络通信半径大于3倍的网络最大功率通信半径的前提下,Sensor节点规模满足2倍网络功率级数加1的环境下,网络无冲突信道分配的信道数达到网络信道冲突图的最大值。文章通过对无冲突信道算法的运用,最终证实其可以有效地提高传感器网络的工作效率,大幅度提升网络的吞吐量。
基金supported by the Major Program of National Natural Science Foundation of China (10990012)the National Natural Science Foundation of China (61201296,61271024)+1 种基金the Fundamental Research Funds for the Central Universities (K5051202037)Guangxi Key Lab of Wireless Wideband Communication & Signal Processing (12205)
文摘The problem of two order statistics detection schemes for the detection of a spatially distributed target in white Gaussian noise are studied.When the number of strong scattering cells is known,we first show an optimal detector,which requires many processing channels.The structure of such optimal detector is complex.Therefore,a simpler quasi-optimal detector is then introduced.The quasi-optimal detector,called the strong scattering cells’ number dependent order statistics（SND-OS） detector,takes the form of an average of maximum strong scattering cells with a known number.If the number of strong scattering cells is unknown in real situation,the multi-channel order statistics（MC-OS） detector is used.In each channel,a various number of maximums scattered from target are averaged.Then,the false alarm probability analysis and thresholds sets for each channel are given,following the detection results presented by means of Monte Carlo simulation strategy based on simulated target model and three measured targets.In particular,the theoretical analysis and simulation results highlight that the MC-OS detector can efficiently detect range-spread targets in white Gaussian noise.
基金supported by the National Natural Science Foundation of China(Nos.11375195,11375263,and 11105143)the project of National Magnetic Confinement Fusion Energy Development Research(No.2013GB104003)
文摘A conventional multi-channel pulse amplitude analyzer acquires single energy spectrum,but provides no information on its tendency with time.To address the limitation,we propose a scheme of time-sharing multichannel pulse amplitude analyzer(TSMCA).A dual-port random access memory is divided into two storage spaces,one for current energy spectrum data acquisition and another for previous energy spectrum data storage.The two tasks can be performed simultaneously,and the time-related variation tendency of energy spectrum can be obtained.A prototype system of TSMCA is designed.It performs nicely,with maximum channel number of 4096 in capacity of 2^(32)/Ch,minimal time-sharing slice of 25 ms,the differential nonlinearity of <1.5%,and the integral nonlinearity of <0.3%.
基金The Open Foundation of Laboratory of Marine Ecosystem and Biogeochemistry,SOA under contract No.LMEB201701
文摘There are well-established chemical and turbidity anomalies in the plumes occurring vicinity of hydrothermal vents, which are used to indicate their existence and locations. We here develop a small, accurate multi-channel chemical sensor to detect such anomalies which can be used in deep-sea at depths of more than 4 000 m. The design allowed five all-solid-state electrodes to be mounted on it and each (apart from one reference electrode) could be changed according to chemicals to be measured. Two experiments were conducted using the chemical sensors. The first was a shallow-sea trial which included sample measurements and in situ monitoring. pH, Eh, CO3^2- and SO4^2- electrodes were utilized to demonstrate that the chemical sensor was accurate and stable outside the laboratory. In the second experiment, the chemical sensor was integrated with pH, Eh, CO3^2- and H2S electrodes, and was used in 29 scans of the seabed along the Southwest Indian Ridge (SWIR) to detect hydrothermal vents, from which 27 sets of valid data were obtained. Hydrothermal vents were identified by analyzing the chemical anomalies, the primary judging criteria were decreasing voltages of Eh and H2S, matched by increasing voltages of pH and CO3^2- . We proposed that simultaneous detection of changes in these parameters will indicate a hydrothermal vent. Amongst the 27 valid sets of data, five potential hydrothermal vents were targeted using the proposed method. We suggest that our sensors could be widely employed by marine scientists.
基金supported by National Natural Science Foundation of China(61473134,61573220)the Postdoctoral Science Foundation of China(2017M622231)
文摘This paper investigates the receding horizon state estimation for the linear discrete-time system with multi-channel observation delays. The receding horizon estimation is designed by the reorganized observation technique and the linear unbiased estimation method. The estimation gains are developed by solving a set of Riccati equations, and a stability result about the state estimation is shown. Finally, an example is given to illustrate the efficiency of the receding horizon state estimation.
基金support of the National Natural Science Key Foundation of China(Grant Nos.91958206,91858215)the Key Research and Development Program of Shandong(Grant No.2019GHY112019)+2 种基金the China Sponsorship Council(Grant No.201806335026)the Opening Foundation of Key Lab of Submarine Geosciences and Prospecting Techniques,MOE,Ocean University of China(Grant No.SGPT-20210F-06)the Fundamental Research Funds for the Central Universities(Grant No.202161013)。
文摘The accurate prediction of formation pressure is important in oil/gas exploration and development.However,the achievement of this goal remains challenging,due to insufficient logging data and the low predictive data accuracy from seismic data.In this work,a case study was carried out in the Baima area of Wulong,in order to develop a workflow for accurately predicting shale gas formation pressure.The multi-channel stack method was first used,as well as the inversion of single-channel seismic data,to construct velocity and density models of the formation.Combined with the existing welllogging data,the velocity and density models of the whole well section were established.The shale gas formation pressure was then estimated using the Eaton method.The results show that the multi-channel seismic stacking method has a higher accuracy than the inversion of the formation velocity obtained by the single-channel seismic method.The discrepancies between our predicted formation pressure and the actual formation pressure measurement are within an acceptable range,indicating that our workflow is effective.
文摘Sleep stage classification plays a significant role in the accurate diagnosis and treatment of sleep-related diseases.This study aims to develop an efficient deep learning based scheme for correctly identifying sleep stages using multi-biological signals such as electroencephalography(EEG),electrocardiogram(ECG),electromyogram(EMG),and electrooculogram(EOG).Most of the prior studies in sleep stage classification focus on hand-crafted feature extraction methods.Traditional hand-crafted feature extraction methods choose features manually from raw data,which is tedious,and these features are limited in their ability to balance efficiency and accuracy.Moreover,most of the existing works on sleep staging are either single channel(a single-lead EEG may not contain enough information)or only EEG signal based which can not reveal more complicated physical features for reliable classification of various sleep stages.This study proposes an approach to combine Convolutional Neural Networks(CNNs)and Gated Recurrent Units(GRUs)that can discover hidden features from multi-biological signal data to recognize the different sleep stages efficiently.In the proposed scheme,the CNN is designed to extract concealed features from the multi-biological signals,and the GRU is employed to automatically learn the transition rules among different sleep stages.After that,the softmax layers are used to classify various sleep stages.The proposed method was tested on two publicly available databases:Sleep Heart Health Study(SHHS)and St.Vincent’s University Hospital/University College Dublin Sleep Apnoea(UCDDB).The experimental results reveal that the proposed model yields better performance compared to state-of-the-art works.Our proposed scheme will assist in building a new system to deal with multi-channel or multi-modal signal processing tasks in various applications.
基金supported in part by National Natural Science Foundation of China under Grants No.61471298 and 61101102Natural Science Basic Research Plan in Shaanxi Province of China (Program No. 2015JM6297)
文摘Recently, single carrier block transmission(SCBT) has received much attention in high-rate phase-coherent underwater acoustic communication.However,minimum-mean-square-error(MMSE) linear FDE may suffer performance loss in the severely time dispersive underwater acoustic channel. To combat the channel distortion, a novel multi-channel receiver with maximum ratio combining and a low complex T/4 fractional iterative frequency domain equalization(FDE) is investigated to improve diversity gain and the bit error rate(BER) performance. The proposed method has been verified by the real data from a lake underwater acoustic communication test in November 2011. At 1.8 km, the useful data rates are around 1500 and 3000 bits/s for BPSK and QPSK respectively. The results show the improvements of system performance. Compared with MMSE FDE system, the output SNR improvement is 6.9 d B, and the BER is from 10-3 to no error bits for BPSK. The output SNR improvement is 5.3 d B, and the BER is from 1.91×10-2 to 2.2×10-4for QPSK.
基金supported by the National Major Scientific and Technological Special Project during the 13th Five-year Plan Period(No.2016ZX05045003-005)
文摘Accurately detecting the arrival time of a channel wave in a coal seam is very important for in-seam seismic data processing. The arrival time greatly affects the accuracy of the channel wave inversion and the computed tomography （CT） result. However, because the signal-to-noise ratio of in-seam seismic data is reduced by the long wavelength and strong frequency dispersion, accurately timing the arrival of channel waves is extremely difficult. For this purpose, we propose a method that automatically picks up the arrival time of channel waves based on multi-channel constraints. We first estimate the Jaccard similarity coefficient of two ray paths, then apply it as a weight coefficient for stacking the multi- channel dispersion spectra. The reasonableness and effectiveness of the proposed method is verified in an actual data application. Most importantly, the method increases the degree of automation and the pickup precision of the channel-wave arrival time.
基金supported by the National Natural Science Foundationof China (60873195 61070220)+3 种基金the Natural Science Foundation of Anhui Province (070412049)the Outstanding Young Teacher Foundation of Anhui Higher Education Institutions of China (2009SQRZ167)the Natural Science Foundation of Anhui Higher Education Institutions of China (KJ2009B114)the Open Project Program of Engineering Research Center of Safety Critical Industry Measure and Control Technology (SCIMCT0802)
文摘To study multi-radio multi-channel （MR-MC） Ad Hoc networks based on 802.11, an efficient cross-layer routing protocol with the function of joint channel assignment, called joint channel assignment and cross-layer routing （JCACR）, is presented. Firstly, this paper introduces a new concept called channel utilization percentage （CUP）, which is for measuring the contention level of different channels in a node’s neighborhood, and deduces its optimal value for determining whether a channel is overloaded or not. Then, a metric parameter named channel selection metric （CSM） is designed, which actually reffects not only the channel status but also corresponding node’s capacity to seize it. JCACR evaluates channel assignment by CSM, performs a local optimization by assigning each node a channel with the smaller CSM value, and changes the working channel dynamically when the channel is overloaded. Therefore, the network load balancing can be achieved. In addition, simulation shows that, when compared with the protocol of weighted cumulative expected transfer time （WCETT）, the new protocol can improve the network throughput and reduce the end-to-end average delay with fewer overheads.
