The uniaxial compressive strength(UCS)of rocks is a vital geomechanical parameter widely used for rock mass classification,stability analysis,and engineering design in rock engineering.Various UCS testing methods and ...The uniaxial compressive strength(UCS)of rocks is a vital geomechanical parameter widely used for rock mass classification,stability analysis,and engineering design in rock engineering.Various UCS testing methods and apparatuses have been proposed over the past few decades.The objective of the present study is to summarize the status and development in theories,test apparatuses,data processing of the existing testing methods for UCS measurement.It starts with elaborating the theories of these test methods.Then the test apparatus and development trends for UCS measurement are summarized,followed by a discussion on rock specimens for test apparatus,and data processing methods.Next,the method selection for UCS measurement is recommended.It reveals that the rock failure mechanism in the UCS testing methods can be divided into compression-shear,compression-tension,composite failure mode,and no obvious failure mode.The trends of these apparatuses are towards automation,digitization,precision,and multi-modal test.Two size correction methods are commonly used.One is to develop empirical correlation between the measured indices and the specimen size.The other is to use a standard specimen to calculate the size correction factor.Three to five input parameters are commonly utilized in soft computation models to predict the UCS of rocks.The selection of the test methods for the UCS measurement can be carried out according to the testing scenario and the specimen size.The engineers can gain a comprehensive understanding of the UCS testing methods and its potential developments in various rock engineering endeavors.展开更多
The paper intfoduces a PC-DSP based real-time digital simulator which is portable in size and aimed at the closed-loop testing of various types of protective relays for their design and application. The simulator can ...The paper intfoduces a PC-DSP based real-time digital simulator which is portable in size and aimed at the closed-loop testing of various types of protective relays for their design and application. The simulator can be widely used in not only concerning utilities but also manufacturers and research / certification institutes because of its many functions. The hardware architecture and software implementation of the simulator are described. The main features and functions of the simulator are also展开更多
This investigation aims to explore the effects of stress conditions and rock cutting rates on hard rock fragmentation through indentation tests on a newly designed triaxial testing apparatus.This apparatus was designe...This investigation aims to explore the effects of stress conditions and rock cutting rates on hard rock fragmentation through indentation tests on a newly designed triaxial testing apparatus.This apparatus was designed to realize a triaxial loading and indentation test of cylindrical specimens using inserted tooth cutter.The boreability and crushing efficiency of granite rock was investigated by analyzing the change rules of the thrusting force,penetration depth,characteristics of chippings and failure patterns.Several quantitative indexes were used to evaluate rock boreability in this investigation.The granite rock samples all had a chiselled pit and a crushed rock core.Under initial stress conditions,only flat-shape chippings were stripped from the rock surface when the thrusting force reached 20 kN.The rock cutting special energy had a close correlation with the initial stress conditions and inserted tooth shape.Moreover,a thrusting force prediction model was proposed in this paper.The contribution of this study is that for the first time the influence mechanism of the initial triaxial stress conditions on rock fragmentation is investigated using an inserted tooth and the newly designed testing apparatus.This study has a crucial importance for practical underground hard rock crushing in geoengineering.展开更多
This paper describes the setup and working mechanism of a simulation test apparatus for marine corrosion. Experimental results showed the apparatus can basically reflect the corrosion behavior of steel in various mari...This paper describes the setup and working mechanism of a simulation test apparatus for marine corrosion. Experimental results showed the apparatus can basically reflect the corrosion behavior of steel in various marine environments, and is simple, convenient, and reliable for testing steel used for marine engineering.展开更多
Compressed air is an integral utility part of industrial utility systems. Any improvement in compressed air system will lead to reduction in utility cost. The effectiveness of utilization side of compressed air is usu...Compressed air is an integral utility part of industrial utility systems. Any improvement in compressed air system will lead to reduction in utility cost. The effectiveness of utilization side of compressed air is usually dependent upon operator’s discretion. There are no performance testing methods available for testing existing end use equipments. A test apparatus for estimation of compressed air flow based on measurement of pressure reduction in a fixed volume cylinder in a given time is developed. The test apparatus is easy to build and simple to operate in an industrial environment. This can be used for measuring performance of any pneumatic end-use equipment and for benchmarking the performance. The test apparatus was used in a foundry for quantifying the performance of the old and new blow guns.展开更多
This paper reviews 19 apparatuses having highvelocity capabilities,describes a rotary-shear low to highvelocity friction apparatus installed at Institute of Geology,China Earthquake Administration,and reports results ...This paper reviews 19 apparatuses having highvelocity capabilities,describes a rotary-shear low to highvelocity friction apparatus installed at Institute of Geology,China Earthquake Administration,and reports results from velocity-jump tests on Pingxi fault gouge to illustrate technical problems in conducting velocity-stepping tests at high velocities.The apparatus is capable of producing plate to seismic velocities（44 mm/a to 2.1 m/s for specimens of 40 mm in diameter）,using a 22 kW servomotor with a gear/belt system having three velocity ranges.A speed range can be changed by 103 or 106by using five electromagnetic clutches without stopping the motor.Two cam clutches allow fivefold velocity steps,and the motor speed can be increased from zero to 1,500 rpm in 0.1-0.2 s by changing the controlling voltage.A unique feature of the apparatus is a large specimen chamber where different specimen assemblies can be installed easily.In addition to a standard specimen assembly for friction experiments,two pressure vessels were made for pore pressures to 70 MPa;one at room temperature and the other at temperatures to 500 °C.Velocity step tests are needed to see if the framework of rate-and-state friction is applicable or not at high velocities.We report results from velocity jump tests from 1.4 mm/s to 1.4 m/s on yellowish gouge from a Pingxi fault zone,located at the northeastern part of the Longmenshan fault system that caused the 2008 Wenchuan earthquake.An instantaneous increase in friction followed by dramatic slip weakening was observed for the yellowish gouge with smooth sliding surfaces of host rock,but no instantaneous response was recognized for the same gouge with roughened sliding surfaces.Instantaneous and transient frictional properties upon velocity steps cannot be separated easily at high velocities,and technical improvements for velocity step tests are suggested.展开更多
In this paper an apparatus for measuring heat transfer properties of clothing materials is re-ported.In comparison with the similar device based on constant temperature method and em-ploying a hot plate,the characteri...In this paper an apparatus for measuring heat transfer properties of clothing materials is re-ported.In comparison with the similar device based on constant temperature method and em-ploying a hot plate,the characteristics of this apparatus are as follows.(1)By using microcomputer as its testing control and data processing center,the testingfunction is strengthened,while much more information can be achieved.(2)By using numerical PID control technique supported with software,the informationabout the transient heat transfer properties of clothing materials can be obtained,while the costlowered.In this paper a brief evaluation of the apparatus is also reported.It shows that its accuracyand repeatability reaches the level of similar commercial device,so to some extent the apparatusis practical.展开更多
The shear strength of gas-hydrate-bearing reservoirs is one of the most important parameters used to study mechanical properties of gas-hydrate-bearing reservoirs. The shear strength of gas-hydrate- bearing reservoirs...The shear strength of gas-hydrate-bearing reservoirs is one of the most important parameters used to study mechanical properties of gas-hydrate-bearing reservoirs. The shear strength of gas-hydrate- bearing reservoirs changes with filling and cementation of gas hydrates, which will affect the wellbore and reservoir stability. Traditional shear tests could not be conducted on gas-hydrate-bearing core samples because the gas hydrates exist under a limited range of temperature and pressure conditions. This paper describes a novel shear apparatus for studying shear strength of gas-hydrate-bearing core samples under original reservoir conditions. The preparation of gas-hydrate-bearing core samples and subsequent shear tests are done in the same cell. Cohesion and internal friction angle of the core samples with different saturations of gas hydrates were measured with the apparatus. The effect of gas hydrates on the shear strength of reservoirs was quantitatively analyzed. This provides a foundation for studying wellbore and reservoir stability of gas-hydrate-bearing reservoirs.展开更多
Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changj...Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changjiang Tunnel. This paper introduces the testing processes, including loading apparatuses, test contents, test cases, etc., and makes comparison with other shield lining structure tests conducted before, and finally gives some evaluations on the design of the tunnel.展开更多
Coal dust explosion accidents often cause substantial property damage and casualties and frequently involve nano-sized coal dust.In order to study the impact of nano-sized coal on coal dust and methane–coal dust expl...Coal dust explosion accidents often cause substantial property damage and casualties and frequently involve nano-sized coal dust.In order to study the impact of nano-sized coal on coal dust and methane–coal dust explosions,a pipe test apparatus was used to analyze the explosion pressure characteristics of five types of micro-nano particle dusts(800 nm,1200 nm,45μm,60μm,and 75μm)at five concentrations(100 g/m3,250 g/m3,500 g/m3,750 g/m3,and 1000 g/m3).The explosion pressure characteristics were closely related to the coal dust particle size and concentration.The maximum explosion pressure,maximum rate of pressure rise,and deflagration index for nano-sized coal dust were larger than for its micro-sized counterpart,indicating that a nano-sized coal dust explosion is more dangerous.The highest deflagration index Kst for coal dust was 13.97 MPa/(m·s),indicating weak explosibility.When 7%methane was added to the air,the maximum deflagration index Kst for methane–coal dust was 42.62 MPa/(m·s),indicating very strong explosibility.This indicates that adding methane to the coal dust mixture substantially increased the hazard grade.展开更多
Understanding the mechanical and hydraulic properties of fractured rocks and their coupled processes is of great significance for the exploration,design,construction,operation,and maintenance of many rock engineering ...Understanding the mechanical and hydraulic properties of fractured rocks and their coupled processes is of great significance for the exploration,design,construction,operation,and maintenance of many rock engineering projects such as hydropower development,oil and gas extraction,and underground waste disposal.With the rapid advancement of global and national strategies such as the“Paris Agreement”and the“Belt and Road Initiative”,more and more projects are developed in the complex geological environment with varying geological structures.Shear failure and rock instability are prone to occur in fractured rock masses under the coupled effects of high stress,high pore pressure,and engineering disturbance,which are main sources for engineering disasters such as roof collapse and caving,water and mud inrushes,and induced earthquakes.To solve these problems,extensive research on the coupled shear-flow behavior of fractures has been conducted.However,due to the complex mechanical,hydraulic and geometrical characteristics of single fractures and fracture networks,a large number of outstanding issues related to the impact of the coupled processes on the engineering characteristics of rock masses are still unsolved.The relevant experimental apparatuses and methods remain to be further developed.Therefore,in this review,we analyze and summarize the existing shear-flow experimental apparatuses,classify apparatus configurations,specimen shapes,and testing principles,and compare their advantages and disadvantages.We also summarize the main scientific findings obtained from various experimental apparatuses,aiming to provide a reference for developing new shear-flow experimental apparatuses and conducting related scientific research in the future.展开更多
The genotoxic potentiality of the crude leaf extract of Casearia tomentosa, a medicinal preparation, has been evaluated in Swiss albino mice. The extract significantly induced the division_disruptive chromosomal c...The genotoxic potentiality of the crude leaf extract of Casearia tomentosa, a medicinal preparation, has been evaluated in Swiss albino mice. The extract significantly induced the division_disruptive chromosomal changes in bone marrow cells as well as in primary spermatocytes; the latter also exhibited marked increase in synaptic disruptions. A significant decrease in sperm count was noted. The incidence of structural damages in chromosomes, however, remained within the range of control level frequency. This herbal preparation, therefore, appears to be primarily spindle_poisoning in its action, but not clastogenic. The probable mechanism of this differential genotoxicity is discussed.展开更多
基金the National Natural Science Foundation of China(Grant Nos.52308403 and 52079068)the Yunlong Lake Laboratory of Deep Underground Science and Engineering(No.104023005)the China Postdoctoral Science Foundation(Grant No.2023M731998)for funding provided to this work.
文摘The uniaxial compressive strength(UCS)of rocks is a vital geomechanical parameter widely used for rock mass classification,stability analysis,and engineering design in rock engineering.Various UCS testing methods and apparatuses have been proposed over the past few decades.The objective of the present study is to summarize the status and development in theories,test apparatuses,data processing of the existing testing methods for UCS measurement.It starts with elaborating the theories of these test methods.Then the test apparatus and development trends for UCS measurement are summarized,followed by a discussion on rock specimens for test apparatus,and data processing methods.Next,the method selection for UCS measurement is recommended.It reveals that the rock failure mechanism in the UCS testing methods can be divided into compression-shear,compression-tension,composite failure mode,and no obvious failure mode.The trends of these apparatuses are towards automation,digitization,precision,and multi-modal test.Two size correction methods are commonly used.One is to develop empirical correlation between the measured indices and the specimen size.The other is to use a standard specimen to calculate the size correction factor.Three to five input parameters are commonly utilized in soft computation models to predict the UCS of rocks.The selection of the test methods for the UCS measurement can be carried out according to the testing scenario and the specimen size.The engineers can gain a comprehensive understanding of the UCS testing methods and its potential developments in various rock engineering endeavors.
文摘The paper intfoduces a PC-DSP based real-time digital simulator which is portable in size and aimed at the closed-loop testing of various types of protective relays for their design and application. The simulator can be widely used in not only concerning utilities but also manufacturers and research / certification institutes because of its many functions. The hardware architecture and software implementation of the simulator are described. The main features and functions of the simulator are also
基金The authors gratefully acknowledge the financial support from Natural Science Research Project of Universities in Anhui Province(No.KJ2021A0463)Scientific Research Startup Fund for introduced talents of Anhui University of Science and Technology,and Natural Science Foundation of Anhui Province(No.2108085QE208).
文摘This investigation aims to explore the effects of stress conditions and rock cutting rates on hard rock fragmentation through indentation tests on a newly designed triaxial testing apparatus.This apparatus was designed to realize a triaxial loading and indentation test of cylindrical specimens using inserted tooth cutter.The boreability and crushing efficiency of granite rock was investigated by analyzing the change rules of the thrusting force,penetration depth,characteristics of chippings and failure patterns.Several quantitative indexes were used to evaluate rock boreability in this investigation.The granite rock samples all had a chiselled pit and a crushed rock core.Under initial stress conditions,only flat-shape chippings were stripped from the rock surface when the thrusting force reached 20 kN.The rock cutting special energy had a close correlation with the initial stress conditions and inserted tooth shape.Moreover,a thrusting force prediction model was proposed in this paper.The contribution of this study is that for the first time the influence mechanism of the initial triaxial stress conditions on rock fragmentation is investigated using an inserted tooth and the newly designed testing apparatus.This study has a crucial importance for practical underground hard rock crushing in geoengineering.
文摘This paper describes the setup and working mechanism of a simulation test apparatus for marine corrosion. Experimental results showed the apparatus can basically reflect the corrosion behavior of steel in various marine environments, and is simple, convenient, and reliable for testing steel used for marine engineering.
文摘Compressed air is an integral utility part of industrial utility systems. Any improvement in compressed air system will lead to reduction in utility cost. The effectiveness of utilization side of compressed air is usually dependent upon operator’s discretion. There are no performance testing methods available for testing existing end use equipments. A test apparatus for estimation of compressed air flow based on measurement of pressure reduction in a fixed volume cylinder in a given time is developed. The test apparatus is easy to build and simple to operate in an industrial environment. This can be used for measuring performance of any pneumatic end-use equipment and for benchmarking the performance. The test apparatus was used in a foundry for quantifying the performance of the old and new blow guns.
基金supported by State Key Laboratory of Earthquake Dynamics (Project No.LED2014A06 & LED2010A05)
文摘This paper reviews 19 apparatuses having highvelocity capabilities,describes a rotary-shear low to highvelocity friction apparatus installed at Institute of Geology,China Earthquake Administration,and reports results from velocity-jump tests on Pingxi fault gouge to illustrate technical problems in conducting velocity-stepping tests at high velocities.The apparatus is capable of producing plate to seismic velocities（44 mm/a to 2.1 m/s for specimens of 40 mm in diameter）,using a 22 kW servomotor with a gear/belt system having three velocity ranges.A speed range can be changed by 103 or 106by using five electromagnetic clutches without stopping the motor.Two cam clutches allow fivefold velocity steps,and the motor speed can be increased from zero to 1,500 rpm in 0.1-0.2 s by changing the controlling voltage.A unique feature of the apparatus is a large specimen chamber where different specimen assemblies can be installed easily.In addition to a standard specimen assembly for friction experiments,two pressure vessels were made for pore pressures to 70 MPa;one at room temperature and the other at temperatures to 500 °C.Velocity step tests are needed to see if the framework of rate-and-state friction is applicable or not at high velocities.We report results from velocity jump tests from 1.4 mm/s to 1.4 m/s on yellowish gouge from a Pingxi fault zone,located at the northeastern part of the Longmenshan fault system that caused the 2008 Wenchuan earthquake.An instantaneous increase in friction followed by dramatic slip weakening was observed for the yellowish gouge with smooth sliding surfaces of host rock,but no instantaneous response was recognized for the same gouge with roughened sliding surfaces.Instantaneous and transient frictional properties upon velocity steps cannot be separated easily at high velocities,and technical improvements for velocity step tests are suggested.
文摘In this paper an apparatus for measuring heat transfer properties of clothing materials is re-ported.In comparison with the similar device based on constant temperature method and em-ploying a hot plate,the characteristics of this apparatus are as follows.(1)By using microcomputer as its testing control and data processing center,the testingfunction is strengthened,while much more information can be achieved.(2)By using numerical PID control technique supported with software,the informationabout the transient heat transfer properties of clothing materials can be obtained,while the costlowered.In this paper a brief evaluation of the apparatus is also reported.It shows that its accuracyand repeatability reaches the level of similar commercial device,so to some extent the apparatusis practical.
基金support from"Preliminary Research on natural gas hydrates production"from SINOPEC(No.P06070)
文摘The shear strength of gas-hydrate-bearing reservoirs is one of the most important parameters used to study mechanical properties of gas-hydrate-bearing reservoirs. The shear strength of gas-hydrate- bearing reservoirs changes with filling and cementation of gas hydrates, which will affect the wellbore and reservoir stability. Traditional shear tests could not be conducted on gas-hydrate-bearing core samples because the gas hydrates exist under a limited range of temperature and pressure conditions. This paper describes a novel shear apparatus for studying shear strength of gas-hydrate-bearing core samples under original reservoir conditions. The preparation of gas-hydrate-bearing core samples and subsequent shear tests are done in the same cell. Cohesion and internal friction angle of the core samples with different saturations of gas hydrates were measured with the apparatus. The effect of gas hydrates on the shear strength of reservoirs was quantitatively analyzed. This provides a foundation for studying wellbore and reservoir stability of gas-hydrate-bearing reservoirs.
文摘Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changjiang Tunnel. This paper introduces the testing processes, including loading apparatuses, test contents, test cases, etc., and makes comparison with other shield lining structure tests conducted before, and finally gives some evaluations on the design of the tunnel.
基金This research was supported by the National Key Research and Development Program of China(2016YFC0801800)the National Nature Science Foundation of China(51774291,51864045).
文摘Coal dust explosion accidents often cause substantial property damage and casualties and frequently involve nano-sized coal dust.In order to study the impact of nano-sized coal on coal dust and methane–coal dust explosions,a pipe test apparatus was used to analyze the explosion pressure characteristics of five types of micro-nano particle dusts(800 nm,1200 nm,45μm,60μm,and 75μm)at five concentrations(100 g/m3,250 g/m3,500 g/m3,750 g/m3,and 1000 g/m3).The explosion pressure characteristics were closely related to the coal dust particle size and concentration.The maximum explosion pressure,maximum rate of pressure rise,and deflagration index for nano-sized coal dust were larger than for its micro-sized counterpart,indicating that a nano-sized coal dust explosion is more dangerous.The highest deflagration index Kst for coal dust was 13.97 MPa/(m·s),indicating weak explosibility.When 7%methane was added to the air,the maximum deflagration index Kst for methane–coal dust was 42.62 MPa/(m·s),indicating very strong explosibility.This indicates that adding methane to the coal dust mixture substantially increased the hazard grade.
基金funded by the National Natural Science Foundation of China(Grant Nos.42077252,42011530122)Natural Science Foundation of Shandong Province,China(Grant No.ZR2021QE069).
文摘Understanding the mechanical and hydraulic properties of fractured rocks and their coupled processes is of great significance for the exploration,design,construction,operation,and maintenance of many rock engineering projects such as hydropower development,oil and gas extraction,and underground waste disposal.With the rapid advancement of global and national strategies such as the“Paris Agreement”and the“Belt and Road Initiative”,more and more projects are developed in the complex geological environment with varying geological structures.Shear failure and rock instability are prone to occur in fractured rock masses under the coupled effects of high stress,high pore pressure,and engineering disturbance,which are main sources for engineering disasters such as roof collapse and caving,water and mud inrushes,and induced earthquakes.To solve these problems,extensive research on the coupled shear-flow behavior of fractures has been conducted.However,due to the complex mechanical,hydraulic and geometrical characteristics of single fractures and fracture networks,a large number of outstanding issues related to the impact of the coupled processes on the engineering characteristics of rock masses are still unsolved.The relevant experimental apparatuses and methods remain to be further developed.Therefore,in this review,we analyze and summarize the existing shear-flow experimental apparatuses,classify apparatus configurations,specimen shapes,and testing principles,and compare their advantages and disadvantages.We also summarize the main scientific findings obtained from various experimental apparatuses,aiming to provide a reference for developing new shear-flow experimental apparatuses and conducting related scientific research in the future.
文摘The genotoxic potentiality of the crude leaf extract of Casearia tomentosa, a medicinal preparation, has been evaluated in Swiss albino mice. The extract significantly induced the division_disruptive chromosomal changes in bone marrow cells as well as in primary spermatocytes; the latter also exhibited marked increase in synaptic disruptions. A significant decrease in sperm count was noted. The incidence of structural damages in chromosomes, however, remained within the range of control level frequency. This herbal preparation, therefore, appears to be primarily spindle_poisoning in its action, but not clastogenic. The probable mechanism of this differential genotoxicity is discussed.
