Cone penetration testing(CPT)and its variant with pore pressure measurements(CPTu)are versatile tools that have been traditionally used for in situ geotechnical site investigations.These investigations are among the m...Cone penetration testing(CPT)and its variant with pore pressure measurements(CPTu)are versatile tools that have been traditionally used for in situ geotechnical site investigations.These investigations are among the most challenging yet indispensable tasks,providing a crucial reference for infrastructure planning,design and construction.However,data obtained through the CPT/CPTu testing often exhibit significant variability,even at closely spaced test points.This variability is primarily attributed to the complex mineral compositions and sedimentary process of the Quaternary sediments.Problems induced by the scattering data include the difficulties in estimating the shear strength of the sediments and determining the appropriate bearing stratum for pile foundations.In this paper,the conventional interpretation methods of the CPT/CPTu data are enhanced with sedimentary facies knowledge.The geotechnical investigation mainly involves 42 CPTu tests(39 essential data sets available)and 4 boring samples.Sediment types are interpreted from the CPTu data and calibrated by the nearby boring samples.Sedimentary facies are derived from the interpreted sequence stratigraphy,for which the interpretation skills are summarized in the form of characteristic curves of the CPTu data.Scattering distribution of the sediment types and their mechanical parameters are well explained by the sedimentary facies.The sediments are then categorized into a few groups by their sedimentary facies,resulting in reduced uncertainties and scattering in terms of shear strength.Bearing stratum of pile foundations is also suggested based on the sedimentary regulations.展开更多
In this study, th e least sq u are su p p o rt v ecto r m achine （LSSVM） alg o rith m w as applied to predicting th ebearing capacity o f b ored piles e m b ed d ed in sand an d m ixed soils. Pile g eo m etry an d c...In this study, th e least sq u are su p p o rt v ecto r m achine （LSSVM） alg o rith m w as applied to predicting th ebearing capacity o f b ored piles e m b ed d ed in sand an d m ixed soils. Pile g eo m etry an d cone p e n e tra tio nte s t （CPT） resu lts w ere used as in p u t variables for pred ictio n o f pile bearin g capacity. The d ata u se d w erecollected from th e existing litera tu re an d consisted o f 50 case records. The application o f LSSVM w ascarried o u t by dividing th e d ata into th re e se ts： a train in g se t for learning th e pro b lem an d obtain in g arelationship b e tw e e n in p u t variables an d pile bearin g capacity, and testin g an d validation sets forevaluation o f th e predictive an d g en eralization ability o f th e o b tain ed relationship. The predictions o f pilebearing capacity by LSSVM w ere evaluated by com paring w ith ex p erim en tal d ata an d w ith th o se bytrad itio n al CPT-based m eth o d s and th e gene ex pression pro g ram m in g （GEP） m odel. It w as found th a t th eLSSVM perform s w ell w ith coefficient o f d eterm in atio n , m ean, an d sta n d ard dev iatio n equivalent to 0.99,1.03, an d 0.08, respectively, for th e testin g set, an d 1, 1.04, an d 0.11, respectively, for th e v alidation set. Thelow values o f th e calculated m ean squared e rro r an d m ean ab so lu te e rro r indicated th a t th e LSSVM w asaccurate in p redicting th e pile bearing capacity. The results o f com parison also show ed th a t th e p roposedalg o rith m p red icted th e pile bearin g capacity m ore accurately th a n th e trad itio n al m eth o d s including th eGEP m odel.展开更多
Cone penetration test(CPT)is an appropriate technique for quickly determining the geotechnical properties of lunar soil,which is valuable for in situ lunar exploration.Utilizing a typical coupling method recently deve...Cone penetration test(CPT)is an appropriate technique for quickly determining the geotechnical properties of lunar soil,which is valuable for in situ lunar exploration.Utilizing a typical coupling method recently developed by the authors,a finite element method(FEM)-discrete element method(DEM)coupled model of CPTs is obtained.A series of CPTs in lunar soil are simulated to qualitatively reveal the flow of particles and the development of resistance throughout the penetration process.In addition,the effects of major factors,such as penetration velocity,penetration depth,cone tip angle,and the low gravity on the Moon surface are investigated.展开更多
This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures ...This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures and experiments using fall cone and Casagrande methods were compiled to assess the relationships among specified water content,cone penetration index ebT,and plasticity angle eaT of finegrained soils.The results indicate that no unique correlation exists among b,liquid limit of the fall cone test(LLc)and a.The water content at 1 mm cone penetration eC0T correlates well with b,plasticity ratio eRpT(i.e.the ratio of plastic limit to liquid limit),and a.Finally,the potential of using the btan a diagram to classify soil plasticity was also discussed.展开更多
Characterizing spatial distribution of soil liquefaction potential is critical for assessing liquefactionrelated hazards(e.g.building damages caused by liquefaction-induced differential settlement).However,in engineer...Characterizing spatial distribution of soil liquefaction potential is critical for assessing liquefactionrelated hazards(e.g.building damages caused by liquefaction-induced differential settlement).However,in engineering practice,soil liquefaction potential is usually measured at limited locations in a specific site using in situ tests,e.g.cone penetration tests(CPTs),due to the restrictions of time,cost and access to subsurface space.In these cases,liquefaction potential of soil at untested locations requires to be interpreted from limited measured data points using proper interpolation method,leading to remarkable statistical uncertainty in liquefaction assessment.This underlines an important question of how to optimize the locations of CPT soundings and determine the minimum number of CPTs for achieving a target reliability level of liquefaction assessment.To tackle this issue,this study proposes a smart sampling strategy for determining the minimum number of CPTs and their optimal locations in a selfadaptive and data-driven manner.The proposed sampling strategy leverages on information entropy and Bayesian compressive sampling(BCS).Both simulated and real CPT data are used to demonstrate the proposed method.Illustrative examples indicate that the proposed method can adaptively and sequentially select the required number and optimal locations of CPTs.展开更多
Interpretation of electric cone penetration test(CPT) based pore water pressure measurement(CPTu) is well established for soils with behavior that follows classical soil mechanics. The literature on the interpretation...Interpretation of electric cone penetration test(CPT) based pore water pressure measurement(CPTu) is well established for soils with behavior that follows classical soil mechanics. The literature on the interpretation of these tests performed on unsaturated tropical soils is limited, and little is known about the influence of soil suction on in situ test data. In this context, the CPT data are presented and discussed to illustrate the seasonal variability in an unsaturated tropical soil site. The test data show that soil suction significantly influenced CPT data up to a depth of 4 m at the study site. It shows the importance of considering seasonal variability in unsaturated soil sites caused by soil suction, which was related to water content through a soil-water retention curve(SWRC). It is also important to consider this aspect in the interpretation of CPT data from these soils.展开更多
The aim of this paper is to evaluate the liquefaction-induced ground deformations of sand-like soils based on Cone Penetration Tests (CPT) at Semani site, Fieri prefecture in Albania. These tests are performed during ...The aim of this paper is to evaluate the liquefaction-induced ground deformations of sand-like soils based on Cone Penetration Tests (CPT) at Semani site, Fieri prefecture in Albania. These tests are performed during the process of investigation of this area, in which a Liquid Natural Gas Terminal-Power Plant was supposed to be built. This paper presents the assessment of the liquefaction and of the liquefaction-induced ground deformations such as lateral spreading displacement and post-liquefaction reconsolidation settlement. The liquefaction-induced lateral spreading and post-liquefaction reconsolidation settlement are estimated based on CPT data according to the method in MNO-12 “soil liquefaction during earthquake”, presented by Idriss and Boulanger (2008). This evaluation is very important and should be taken into consideration for the design of engineering structures that will be constructed in this area. All the calculation’s results are shown in graphs. At the end, there are highlighted some conclusions regarding the liquefaction-induced ground deformations in this site.展开更多
The interpretation of the cone penetration test(CPT)still relies largely on empirical correlations that have been predominantly developed in resource-intensive and time-consuming calibration chambers.This paper presen...The interpretation of the cone penetration test(CPT)still relies largely on empirical correlations that have been predominantly developed in resource-intensive and time-consuming calibration chambers.This paper presents a CPT virtual calibration chamber using deep learning(DL)approaches,which allow for the consideration of depth-dependent cone resistance profiles through the implementation of two proposed strategies:(1)depth-resistance mapping using a multilayer perceptron(MLP)and(2)sequence-to-sequence training using a long short-term memory(LSTM)neural network.Two DL models are developed to predict cone resistance profiles(qc)under various soil states and testing conditions,where Bayesian optimization(BO)is adopted to identify the optimal hyperparameters.Subsequently,the BO-MLP and BO-LSTM networks are trained using the available data from published datasets.The results show that the models with BO can effectively improve the prediction accuracy and efficiency of neural networks compared to those without BO.The two training strategies yielded comparable results in the testing set,and both can be used to reproduce the whole cone resistance profile.An extended comparison and validation of the prediction results are carried out against numerical results obtained from a coupled Eulerian-Lagrangian(CEL)model,demonstrating a high degree of agreement between the DL and CEL models.Ultimately,to demonstrate the usability of this new virtual calibration chamber,the predicted qc is used to enhance the preceding correlations with the relative density(Dr)of the sand.The improved correlation with superior generalization has an R^(2) of 82%when considering all data,and 89.6%when examining the pure experimental data.展开更多
Rolling dynamic compaction(RDC),which involves the towing of a noncircular module,is now widespread and accepted among many other soil compaction methods.However,to date,there is no accurate method for reliable predic...Rolling dynamic compaction(RDC),which involves the towing of a noncircular module,is now widespread and accepted among many other soil compaction methods.However,to date,there is no accurate method for reliable prediction of the densification of soil and the extent of ground improvement by means of RDC.This study presents the application of artificial neural networks(ANNs) for a priori prediction of the effectiveness of RDC.The models are trained with in situ dynamic cone penetration(DCP) test data obtained from previous civil projects associated with the 4-sided impact roller.The predictions from the ANN models are in good agreement with the measured field data,as indicated by the model correlation coefficient of approximately 0.8.It is concluded that the ANN models developed in this study can be successfully employed to provide more accurate prediction of the performance of the RDC on a range of soil types.展开更多
In marine engineering, the strength of a submarine sediment is an indispensable parameter for assessment of construction. In this study, a free-fall cone penetrator named IPen was developed to realize a rapid and effi...In marine engineering, the strength of a submarine sediment is an indispensable parameter for assessment of construction. In this study, a free-fall cone penetrator named IPen was developed to realize a rapid and efficient measurement of sediment strength. The equipment is characterized by modular design and self-contained data acquisition. It is equipped with an acceleration sensor, a water pressure sensor, and a piezocone penetration test(CPTu) probe. It is designed to be released from near seabed surface with a releaser and then fall freely to provide a higher penetration velocity. Its maximum working depth is approximately 2500 m and maximum penetration depth is approximately 3 m. To derive the correlation between penetration resistance and sediment strength, a calibrator was devised to determine the penetration-rate factor. In addition, the factor applicable to in situ test points was determined in laboratory experiments. In June 2016, the IPen was tested in situ in the South Yellow Sea, China, during a shared voyage funded by the National Science Foundation. Meanwhile, undisturbed column samples were collected for laboratory tests. Based on the in situ test results, it was demonstrated that the IPen could accurately record the working states of various sensors during the freely falling course. IPen test results reliably reflected the sediment strength at all the testing points when compared with laboratory calibration tests, in situ vane tests and penetration tests, laboratory penetration tests, and unconsolidated and undrained triaxial compression tests.展开更多
Geotechnical parameters derived from an intrusive cone penetration test(CPT)are used to asses mechanical properties to inform the design phase of infrastructure projects.However,local,in situ 1D measurements can fail ...Geotechnical parameters derived from an intrusive cone penetration test(CPT)are used to asses mechanical properties to inform the design phase of infrastructure projects.However,local,in situ 1D measurements can fail to capture 3D subsurface variations,which could mean less than optimal design decisions for foundation engineering.By coupling the localised measurements from CPTs with more global 3D measurements derived from geophysical methods,a higher fidelity 3D overview of the subsurface can be obtained.Machine Learning(ML)may offer an effective means to capture all types of geophysical information associated with CPT data at a site scale to build a 2D or 3D ground model.In this paper,we present an ML approach to build a 3D ground model of cone resistance and sleeve friction by combining several CPT measurements with Multichannel Analysis of Surface Waves(MASW)and Electrical Resistivity Tomography(ERT)data on a land site characterisation project in the United Arab Emirates(UAE).To avoid a potential overfitting problem inherent to the use of machine learning and a lack of data at certain locations,we explore the possibility of using a prior Geo-Statistical(GS)approach that attempts to constrain the overfitting process by“artificially”increasing the amount of input data.A sensitivity study is also performed on input features used to train the ML algorithm to better define the optimal combination of input features for the prediction.Our results showed that ERT data were not useful in capturing 3D variations of geotechnical properties compared to Vs due to the geographical location of the site(200 m east from the Oman Gulf)and the possible effect of saline water intrusion.Additionally,we demonstrate that the use of a prior GS phase could be a promising and interesting means to make the prediction of ground properties more robust,especially for this specific case study described in this paper.Looking ahead,better representation of the subsurface can lead to a number of benefits for stakeholders involved in developing assets.Better ground/geotechnical models mean better site calibration of design methods and fewer design assumptions for reliability-based design,creating an opportunity for value engineering in the form of lighter construction without compromising safety,shorter construction timelines,and reduced resource requirements.展开更多
Ground improvement has been used on many construction sites to densify granular materials, in other word, to improve soil properties and reduce potential settlement. This work presents a case study of ground improveme...Ground improvement has been used on many construction sites to densify granular materials, in other word, to improve soil properties and reduce potential settlement. This work presents a case study of ground improvement using rapid impact compaction （RIC）. The research site comprises the construction of workshop and depots as part of railway development project at Batu Gajah-Ipoh, Malaysia. In-situ testing results show that the subsurface soil comprises mainly of sand and silty sand through the investigated depth extended to 10 m. Groundwater is approximately 0.5 m below the ground surface. Evaluation of improvement was based on the results of pre- and post-improvement cone penetration test （CPT）. Interpretation software has been used to infer soil properties. Load test was conducted to estimate soil settlement. It is found that the technique succeeds in improving soil properties namely the relative density increases from 45% to 70%, the friction angle of soil is increased by an average of 3°, and the soil settlement is reduced by 50%： The technique succeeds in improving soil properties to approximately 5.0 m in depth depending on soil uniformity with depth.展开更多
This paper aims to deal with the comparison of the estimated settlements derived by in situ tests with the observed settlements in site, in order to evaluate the accuracy of settlement prediction by in situ tests, in ...This paper aims to deal with the comparison of the estimated settlements derived by in situ tests with the observed settlements in site, in order to evaluate the accuracy of settlement prediction by in situ tests, in comparison not only with site observation by topographic means, but also with the values of settlements derived by numerical analysis by means of PLAXIS 2D and 3 D. The site where are carried out the tests and periodically are observed the settlements since the beginning of construction process, is located in the Oil Product Terminal, at the industrial park of Porto Romano, Durres, Albania. The main purpose of this project was the ground improvement by using preloading method in order to prevent liquefaction process and settlements. The data used to conduct this study are taken by the site investigation done after inserting into the soil vertical drains made of columns of free--draining gravel （gravel pile drains） until 14 m depth and center-to-center spacing of 2 m, and wick drains （premanufactured） until 25 m depth and center-to-center spacing of 1.8 m. The observed settlements are periodically measured by topographic equipments. This paper will present the conclusions derived by settlement analyzes from in situ tests and site observations.展开更多
The liquefaction is a very significant phenomenon in clayey silty soils, silty sands and also sands. The high potential of liquefaction is generally recognized when these types of soils are laid under the hydrostatic ...The liquefaction is a very significant phenomenon in clayey silty soils, silty sands and also sands. The high potential of liquefaction is generally recognized when these types of soils are laid under the hydrostatic water table. Low plasticity silts, silty sands and sands are found as recent alluvial deposits in the western coastal part of Albania, especially in the sandy beaches of Adriatic Sea near Durres City. The aim of this study is to evaluate the soil liquefaction potential in the area of Golem. Ten CPTUs （cone penetration test with pore pressure measurements） are carried out for the site investigation of soils. In this paper, results of the CPTU based liquefaction analysis are presented. The data of two CPTUs （10 in total） are analyzed and factor of safety was found by considering different levels of hazard and ground water. The results of liquefaction potential analysis show that the soils in the area of Golem have a high risk of liquefaction.展开更多
Cone penetration testing (CPT) is a widely used geotechnical engineering </span><i><span style="font-family:Verdana;">in-situ</span></i><span style="font-family:Verdana;...Cone penetration testing (CPT) is a widely used geotechnical engineering </span><i><span style="font-family:Verdana;">in-situ</span></i><span style="font-family:Verdana;"> test for mapping soil profiles and assessing soil properties. In CPT, a cone on the end of a series of rods is pushed into the ground at a constant rate and resistance to the cone tip is measured (</span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;">). The </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;"> values are utilized to characterize the soil profile. Unfortunately, the measured cone tip resistance </span></span><span style="font-family:Verdana;">is</span><span style="font-family:""><span style="font-family:Verdana;"> blurred and/or averaged which can result in the distortion of the soil profile characterization and the inability to identify thin layers. This paper outlines a novel and highly effective algorithm for obtaining cone bearing estimates </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub></i><span style="font-family:Verdana;"> from averaged or smoothed </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;"> measurements. This </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub></i><span style="font-family:Verdana;"> optimal filter estimation technique is referred to as the </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub><span style="font-family:Verdana;">HMM-IFM</span></i><span style="font-family:Verdana;"> algorithm and it implements a hybrid hidden Markov model and iterative forward modelling technique. The mathematical details of the </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub><span style="font-family:Verdana;">HMM-IFM</span></i><span style="font-family:Verdana;"> algorithm are outline</span><span style="font-family:Verdana;">d in this paper along with the results from challenging test</span></span><span style="font-family:""> </span><span style="font-family:Verdana;">bed. The test</span><span style="font-family:""> </span><span style="font-family:Verdana;">b</span><span style="font-family:""><span style="font-family:Verdana;">ed simulations have demonstrated that the </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub><span style="font-family:Verdana;">HMM-IFM</span></i><span style="font-family:Verdana;"> algorithm can derive accurate </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub></i><span style="font-family:Verdana;"> values from challenging averaged </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;"> profiles. This allows for greater soil resolution and the identification and quantification of thin layers in a soil profile.展开更多
Cone penetration testing (CPT) is an extensively utilized and cost effective tool for geotechnical site characterization. CPT consists of pushing at a constant rate an electronic cone into penetrable soils and recordi...Cone penetration testing (CPT) is an extensively utilized and cost effective tool for geotechnical site characterization. CPT consists of pushing at a constant rate an electronic cone into penetrable soils and recording the resistance to the cone tip (q<sub>c</sub> value). The measured q<sub>c</sub> values (after correction for the pore water pressure) are utilized to estimate soil type and associated soil properties based predominantly on empirical correlations. The most common cone tips have associated areas of 10 cm<sup>2</sup> and 15 cm<sup>2</sup>. Investigators also utilized significantly larger cone tips (33 cm<sup>2</sup> and 40 cm<sup>2</sup>) so that gravelly soils can be penetrated. Small cone tips (2 cm<sup>2</sup> and 5 cm<sup>2</sup>) are utilized for shallow soil investigations. The cone tip resistance measured at a particular depth is affected by the values above and below the depth of interest which results in a smoothing or blurring of the true bearing values. Extensive work has been carried out in mathematically modelling the smoothing function which results in the blurred cone bearing measurements. This paper outlines a technique which facilitates estimating the dominant parameters of the cone smoothing function from processing real cone bearing data sets. This cone calibration technique is referred to as the so-called CPSPE algorithm. The mathematical details of the CPSPE algorithm are outlined in this paper along with the results from a challenging test bed simulation.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42272328 and 52108356).
文摘Cone penetration testing(CPT)and its variant with pore pressure measurements(CPTu)are versatile tools that have been traditionally used for in situ geotechnical site investigations.These investigations are among the most challenging yet indispensable tasks,providing a crucial reference for infrastructure planning,design and construction.However,data obtained through the CPT/CPTu testing often exhibit significant variability,even at closely spaced test points.This variability is primarily attributed to the complex mineral compositions and sedimentary process of the Quaternary sediments.Problems induced by the scattering data include the difficulties in estimating the shear strength of the sediments and determining the appropriate bearing stratum for pile foundations.In this paper,the conventional interpretation methods of the CPT/CPTu data are enhanced with sedimentary facies knowledge.The geotechnical investigation mainly involves 42 CPTu tests(39 essential data sets available)and 4 boring samples.Sediment types are interpreted from the CPTu data and calibrated by the nearby boring samples.Sedimentary facies are derived from the interpreted sequence stratigraphy,for which the interpretation skills are summarized in the form of characteristic curves of the CPTu data.Scattering distribution of the sediment types and their mechanical parameters are well explained by the sedimentary facies.The sediments are then categorized into a few groups by their sedimentary facies,resulting in reduced uncertainties and scattering in terms of shear strength.Bearing stratum of pile foundations is also suggested based on the sedimentary regulations.
文摘In this study, th e least sq u are su p p o rt v ecto r m achine （LSSVM） alg o rith m w as applied to predicting th ebearing capacity o f b ored piles e m b ed d ed in sand an d m ixed soils. Pile g eo m etry an d cone p e n e tra tio nte s t （CPT） resu lts w ere used as in p u t variables for pred ictio n o f pile bearin g capacity. The d ata u se d w erecollected from th e existing litera tu re an d consisted o f 50 case records. The application o f LSSVM w ascarried o u t by dividing th e d ata into th re e se ts： a train in g se t for learning th e pro b lem an d obtain in g arelationship b e tw e e n in p u t variables an d pile bearin g capacity, and testin g an d validation sets forevaluation o f th e predictive an d g en eralization ability o f th e o b tain ed relationship. The predictions o f pilebearing capacity by LSSVM w ere evaluated by com paring w ith ex p erim en tal d ata an d w ith th o se bytrad itio n al CPT-based m eth o d s and th e gene ex pression pro g ram m in g （GEP） m odel. It w as found th a t th eLSSVM perform s w ell w ith coefficient o f d eterm in atio n , m ean, an d sta n d ard dev iatio n equivalent to 0.99,1.03, an d 0.08, respectively, for th e testin g set, an d 1, 1.04, an d 0.11, respectively, for th e v alidation set. Thelow values o f th e calculated m ean squared e rro r an d m ean ab so lu te e rro r indicated th a t th e LSSVM w asaccurate in p redicting th e pile bearing capacity. The results o f com parison also show ed th a t th e p roposedalg o rith m p red icted th e pile bearin g capacity m ore accurately th a n th e trad itio n al m eth o d s including th eGEP m odel.
基金Project(51278451) supported by the National Natural Science Foundation of ChinaProject(LZ12E09001) supported by the Zhejiang Natural Science Foundation,China
文摘Cone penetration test(CPT)is an appropriate technique for quickly determining the geotechnical properties of lunar soil,which is valuable for in situ lunar exploration.Utilizing a typical coupling method recently developed by the authors,a finite element method(FEM)-discrete element method(DEM)coupled model of CPTs is obtained.A series of CPTs in lunar soil are simulated to qualitatively reveal the flow of particles and the development of resistance throughout the penetration process.In addition,the effects of major factors,such as penetration velocity,penetration depth,cone tip angle,and the low gravity on the Moon surface are investigated.
文摘This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures and experiments using fall cone and Casagrande methods were compiled to assess the relationships among specified water content,cone penetration index ebT,and plasticity angle eaT of finegrained soils.The results indicate that no unique correlation exists among b,liquid limit of the fall cone test(LLc)and a.The water content at 1 mm cone penetration eC0T correlates well with b,plasticity ratio eRpT(i.e.the ratio of plastic limit to liquid limit),and a.Finally,the potential of using the btan a diagram to classify soil plasticity was also discussed.
基金supported by grants from the Research Grant Council of Hong Kong Special Administrative Region,China(Project Nos.CityU 11202121 and CityU 11213119).
文摘Characterizing spatial distribution of soil liquefaction potential is critical for assessing liquefactionrelated hazards(e.g.building damages caused by liquefaction-induced differential settlement).However,in engineering practice,soil liquefaction potential is usually measured at limited locations in a specific site using in situ tests,e.g.cone penetration tests(CPTs),due to the restrictions of time,cost and access to subsurface space.In these cases,liquefaction potential of soil at untested locations requires to be interpreted from limited measured data points using proper interpolation method,leading to remarkable statistical uncertainty in liquefaction assessment.This underlines an important question of how to optimize the locations of CPT soundings and determine the minimum number of CPTs for achieving a target reliability level of liquefaction assessment.To tackle this issue,this study proposes a smart sampling strategy for determining the minimum number of CPTs and their optimal locations in a selfadaptive and data-driven manner.The proposed sampling strategy leverages on information entropy and Bayesian compressive sampling(BCS).Both simulated and real CPT data are used to demonstrate the proposed method.Illustrative examples indicate that the proposed method can adaptively and sequentially select the required number and optimal locations of CPTs.
基金the S?o Paulo Research Foundation (FAPESP) (Grant Nos. 2010/50680-3, 2011/09031-0, 2014/23767-8 and 2015/ 17260-0)the National Council for Scientific and Technological Development (CNPq) (Grant Nos. 310867/2012-6 and 446424/ 2014-5) for supporting their research
文摘Interpretation of electric cone penetration test(CPT) based pore water pressure measurement(CPTu) is well established for soils with behavior that follows classical soil mechanics. The literature on the interpretation of these tests performed on unsaturated tropical soils is limited, and little is known about the influence of soil suction on in situ test data. In this context, the CPT data are presented and discussed to illustrate the seasonal variability in an unsaturated tropical soil site. The test data show that soil suction significantly influenced CPT data up to a depth of 4 m at the study site. It shows the importance of considering seasonal variability in unsaturated soil sites caused by soil suction, which was related to water content through a soil-water retention curve(SWRC). It is also important to consider this aspect in the interpretation of CPT data from these soils.
文摘The aim of this paper is to evaluate the liquefaction-induced ground deformations of sand-like soils based on Cone Penetration Tests (CPT) at Semani site, Fieri prefecture in Albania. These tests are performed during the process of investigation of this area, in which a Liquid Natural Gas Terminal-Power Plant was supposed to be built. This paper presents the assessment of the liquefaction and of the liquefaction-induced ground deformations such as lateral spreading displacement and post-liquefaction reconsolidation settlement. The liquefaction-induced lateral spreading and post-liquefaction reconsolidation settlement are estimated based on CPT data according to the method in MNO-12 “soil liquefaction during earthquake”, presented by Idriss and Boulanger (2008). This evaluation is very important and should be taken into consideration for the design of engineering structures that will be constructed in this area. All the calculation’s results are shown in graphs. At the end, there are highlighted some conclusions regarding the liquefaction-induced ground deformations in this site.
基金support from the National Natural Science Foundation of China(Grant No.52408356)the China Scholarship Council(CSC).
文摘The interpretation of the cone penetration test(CPT)still relies largely on empirical correlations that have been predominantly developed in resource-intensive and time-consuming calibration chambers.This paper presents a CPT virtual calibration chamber using deep learning(DL)approaches,which allow for the consideration of depth-dependent cone resistance profiles through the implementation of two proposed strategies:(1)depth-resistance mapping using a multilayer perceptron(MLP)and(2)sequence-to-sequence training using a long short-term memory(LSTM)neural network.Two DL models are developed to predict cone resistance profiles(qc)under various soil states and testing conditions,where Bayesian optimization(BO)is adopted to identify the optimal hyperparameters.Subsequently,the BO-MLP and BO-LSTM networks are trained using the available data from published datasets.The results show that the models with BO can effectively improve the prediction accuracy and efficiency of neural networks compared to those without BO.The two training strategies yielded comparable results in the testing set,and both can be used to reproduce the whole cone resistance profile.An extended comparison and validation of the prediction results are carried out against numerical results obtained from a coupled Eulerian-Lagrangian(CEL)model,demonstrating a high degree of agreement between the DL and CEL models.Ultimately,to demonstrate the usability of this new virtual calibration chamber,the predicted qc is used to enhance the preceding correlations with the relative density(Dr)of the sand.The improved correlation with superior generalization has an R^(2) of 82%when considering all data,and 89.6%when examining the pure experimental data.
基金supported under Australian Research Council's Discovery Projects funding scheme(project No.DP120101761)
文摘Rolling dynamic compaction(RDC),which involves the towing of a noncircular module,is now widespread and accepted among many other soil compaction methods.However,to date,there is no accurate method for reliable prediction of the densification of soil and the extent of ground improvement by means of RDC.This study presents the application of artificial neural networks(ANNs) for a priori prediction of the effectiveness of RDC.The models are trained with in situ dynamic cone penetration(DCP) test data obtained from previous civil projects associated with the 4-sided impact roller.The predictions from the ANN models are in good agreement with the measured field data,as indicated by the model correlation coefficient of approximately 0.8.It is concluded that the ANN models developed in this study can be successfully employed to provide more accurate prediction of the performance of the RDC on a range of soil types.
基金funded by the National Natural Science Foundation of China (Nos. 41502265 and 41427803)the Key Research and Development Program of Shandong Province, China (No. 2016ZDJS09A03)+1 种基金Data acquisition and sample collections were supported by NSFC Open Research Cruise (Cruise Nos. NORC2016-01 and NORC2017-05)funded by Shiptime Sharing Project of NSFC
文摘In marine engineering, the strength of a submarine sediment is an indispensable parameter for assessment of construction. In this study, a free-fall cone penetrator named IPen was developed to realize a rapid and efficient measurement of sediment strength. The equipment is characterized by modular design and self-contained data acquisition. It is equipped with an acceleration sensor, a water pressure sensor, and a piezocone penetration test(CPTu) probe. It is designed to be released from near seabed surface with a releaser and then fall freely to provide a higher penetration velocity. Its maximum working depth is approximately 2500 m and maximum penetration depth is approximately 3 m. To derive the correlation between penetration resistance and sediment strength, a calibrator was devised to determine the penetration-rate factor. In addition, the factor applicable to in situ test points was determined in laboratory experiments. In June 2016, the IPen was tested in situ in the South Yellow Sea, China, during a shared voyage funded by the National Science Foundation. Meanwhile, undisturbed column samples were collected for laboratory tests. Based on the in situ test results, it was demonstrated that the IPen could accurately record the working states of various sensors during the freely falling course. IPen test results reliably reflected the sediment strength at all the testing points when compared with laboratory calibration tests, in situ vane tests and penetration tests, laboratory penetration tests, and unconsolidated and undrained triaxial compression tests.
文摘Geotechnical parameters derived from an intrusive cone penetration test(CPT)are used to asses mechanical properties to inform the design phase of infrastructure projects.However,local,in situ 1D measurements can fail to capture 3D subsurface variations,which could mean less than optimal design decisions for foundation engineering.By coupling the localised measurements from CPTs with more global 3D measurements derived from geophysical methods,a higher fidelity 3D overview of the subsurface can be obtained.Machine Learning(ML)may offer an effective means to capture all types of geophysical information associated with CPT data at a site scale to build a 2D or 3D ground model.In this paper,we present an ML approach to build a 3D ground model of cone resistance and sleeve friction by combining several CPT measurements with Multichannel Analysis of Surface Waves(MASW)and Electrical Resistivity Tomography(ERT)data on a land site characterisation project in the United Arab Emirates(UAE).To avoid a potential overfitting problem inherent to the use of machine learning and a lack of data at certain locations,we explore the possibility of using a prior Geo-Statistical(GS)approach that attempts to constrain the overfitting process by“artificially”increasing the amount of input data.A sensitivity study is also performed on input features used to train the ML algorithm to better define the optimal combination of input features for the prediction.Our results showed that ERT data were not useful in capturing 3D variations of geotechnical properties compared to Vs due to the geographical location of the site(200 m east from the Oman Gulf)and the possible effect of saline water intrusion.Additionally,we demonstrate that the use of a prior GS phase could be a promising and interesting means to make the prediction of ground properties more robust,especially for this specific case study described in this paper.Looking ahead,better representation of the subsurface can lead to a number of benefits for stakeholders involved in developing assets.Better ground/geotechnical models mean better site calibration of design methods and fewer design assumptions for reliability-based design,creating an opportunity for value engineering in the form of lighter construction without compromising safety,shorter construction timelines,and reduced resource requirements.
基金Projects(RG148/12AET,RG086/10AET) supported by the UMRG,MalaysiaProject(PS05812010B) supported by the Post Graduate Research Fund,Malaysia
文摘Ground improvement has been used on many construction sites to densify granular materials, in other word, to improve soil properties and reduce potential settlement. This work presents a case study of ground improvement using rapid impact compaction （RIC）. The research site comprises the construction of workshop and depots as part of railway development project at Batu Gajah-Ipoh, Malaysia. In-situ testing results show that the subsurface soil comprises mainly of sand and silty sand through the investigated depth extended to 10 m. Groundwater is approximately 0.5 m below the ground surface. Evaluation of improvement was based on the results of pre- and post-improvement cone penetration test （CPT）. Interpretation software has been used to infer soil properties. Load test was conducted to estimate soil settlement. It is found that the technique succeeds in improving soil properties namely the relative density increases from 45% to 70%, the friction angle of soil is increased by an average of 3°, and the soil settlement is reduced by 50%： The technique succeeds in improving soil properties to approximately 5.0 m in depth depending on soil uniformity with depth.
文摘This paper aims to deal with the comparison of the estimated settlements derived by in situ tests with the observed settlements in site, in order to evaluate the accuracy of settlement prediction by in situ tests, in comparison not only with site observation by topographic means, but also with the values of settlements derived by numerical analysis by means of PLAXIS 2D and 3 D. The site where are carried out the tests and periodically are observed the settlements since the beginning of construction process, is located in the Oil Product Terminal, at the industrial park of Porto Romano, Durres, Albania. The main purpose of this project was the ground improvement by using preloading method in order to prevent liquefaction process and settlements. The data used to conduct this study are taken by the site investigation done after inserting into the soil vertical drains made of columns of free--draining gravel （gravel pile drains） until 14 m depth and center-to-center spacing of 2 m, and wick drains （premanufactured） until 25 m depth and center-to-center spacing of 1.8 m. The observed settlements are periodically measured by topographic equipments. This paper will present the conclusions derived by settlement analyzes from in situ tests and site observations.
文摘The liquefaction is a very significant phenomenon in clayey silty soils, silty sands and also sands. The high potential of liquefaction is generally recognized when these types of soils are laid under the hydrostatic water table. Low plasticity silts, silty sands and sands are found as recent alluvial deposits in the western coastal part of Albania, especially in the sandy beaches of Adriatic Sea near Durres City. The aim of this study is to evaluate the soil liquefaction potential in the area of Golem. Ten CPTUs （cone penetration test with pore pressure measurements） are carried out for the site investigation of soils. In this paper, results of the CPTU based liquefaction analysis are presented. The data of two CPTUs （10 in total） are analyzed and factor of safety was found by considering different levels of hazard and ground water. The results of liquefaction potential analysis show that the soils in the area of Golem have a high risk of liquefaction.
文摘Cone penetration testing (CPT) is a widely used geotechnical engineering </span><i><span style="font-family:Verdana;">in-situ</span></i><span style="font-family:Verdana;"> test for mapping soil profiles and assessing soil properties. In CPT, a cone on the end of a series of rods is pushed into the ground at a constant rate and resistance to the cone tip is measured (</span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;">). The </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;"> values are utilized to characterize the soil profile. Unfortunately, the measured cone tip resistance </span></span><span style="font-family:Verdana;">is</span><span style="font-family:""><span style="font-family:Verdana;"> blurred and/or averaged which can result in the distortion of the soil profile characterization and the inability to identify thin layers. This paper outlines a novel and highly effective algorithm for obtaining cone bearing estimates </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub></i><span style="font-family:Verdana;"> from averaged or smoothed </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;"> measurements. This </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub></i><span style="font-family:Verdana;"> optimal filter estimation technique is referred to as the </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub><span style="font-family:Verdana;">HMM-IFM</span></i><span style="font-family:Verdana;"> algorithm and it implements a hybrid hidden Markov model and iterative forward modelling technique. The mathematical details of the </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub><span style="font-family:Verdana;">HMM-IFM</span></i><span style="font-family:Verdana;"> algorithm are outline</span><span style="font-family:Verdana;">d in this paper along with the results from challenging test</span></span><span style="font-family:""> </span><span style="font-family:Verdana;">bed. The test</span><span style="font-family:""> </span><span style="font-family:Verdana;">b</span><span style="font-family:""><span style="font-family:Verdana;">ed simulations have demonstrated that the </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub><span style="font-family:Verdana;">HMM-IFM</span></i><span style="font-family:Verdana;"> algorithm can derive accurate </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">t</span></sub></i><span style="font-family:Verdana;"> values from challenging averaged </span><i><span style="font-family:Verdana;">q</span><sub><span style="font-family:Verdana;">m</span></sub></i><span style="font-family:Verdana;"> profiles. This allows for greater soil resolution and the identification and quantification of thin layers in a soil profile.
文摘Cone penetration testing (CPT) is an extensively utilized and cost effective tool for geotechnical site characterization. CPT consists of pushing at a constant rate an electronic cone into penetrable soils and recording the resistance to the cone tip (q<sub>c</sub> value). The measured q<sub>c</sub> values (after correction for the pore water pressure) are utilized to estimate soil type and associated soil properties based predominantly on empirical correlations. The most common cone tips have associated areas of 10 cm<sup>2</sup> and 15 cm<sup>2</sup>. Investigators also utilized significantly larger cone tips (33 cm<sup>2</sup> and 40 cm<sup>2</sup>) so that gravelly soils can be penetrated. Small cone tips (2 cm<sup>2</sup> and 5 cm<sup>2</sup>) are utilized for shallow soil investigations. The cone tip resistance measured at a particular depth is affected by the values above and below the depth of interest which results in a smoothing or blurring of the true bearing values. Extensive work has been carried out in mathematically modelling the smoothing function which results in the blurred cone bearing measurements. This paper outlines a technique which facilitates estimating the dominant parameters of the cone smoothing function from processing real cone bearing data sets. This cone calibration technique is referred to as the so-called CPSPE algorithm. The mathematical details of the CPSPE algorithm are outlined in this paper along with the results from a challenging test bed simulation.
