Meshing temperature analyses of polymer gears reported in the literature mainly concern the effects of various material combinations and loading conditions,as their impacts could be seen in the first few meshing cycle...Meshing temperature analyses of polymer gears reported in the literature mainly concern the effects of various material combinations and loading conditions,as their impacts could be seen in the first few meshing cycles.However,the effects of tooth geometry parameters could manifest as the meshing cycles increase.This study investigated the effects of tooth geometry parameters on the multi-cycle meshing temperature of polyoxymethylene(POM)worm gears,aiming to control the meshing temperature elevation by tuning the tooth geometry.Firstly,a finite element(FE)model capable of separately calculating the heat generation and simulating the heat propagation was established.Moreover,an adaptive iteration algorithm was proposed within the FE framework to capture the influence of the heat generation variation from cycle to cycle.This algorithm proved to be feasible and highly efficient compared with experimental results from the literature and simulated results via the full-iteration algorithm.Multi-cycle meshing temperature analyses were conducted on a series of POM worm gears with different tooth geometry parameters.The results reveal that,within the range of 14.5°to 25°,a pressure angle of 25°is favorable for reducing the peak surface temperature and overall body temperature of POM worm gears,which influence flank wear and load-carrying capability,respectively.However,addendum modification should be weighed because it helps with load bearing but increases the risk of severe flank wear.This paper proposes an efficient iteration algorithm for multi-cycle meshing temperature analysis of polymer gears and proves the feasibility of controlling the meshing temperature elevation during multiple cycles by tuning tooth geometry.展开更多
Based on the differences in production mode and operation process between gas storage and gas reservoir,we established a phase balance test procedure and a theoretical simulation model of phase balance during multi-cy...Based on the differences in production mode and operation process between gas storage and gas reservoir,we established a phase balance test procedure and a theoretical simulation model of phase balance during multi-cycles of injection and production of underground gas storage(UGS)rebuilt from condensate gas reservoir to study the phase characteristics of produced and remaining fluids during multi-cycles of injection and production.Take condensate reservoir gas storage as example,the composition of produced fluid and remaining fluid,phase state of remaining fluid,retrograde condensate saturation and condensate recovery degree in the process of multi-cycles of injection-production were studied through multi-cycle injection-production experiment and phase equilibrium theory simulation.The injected gas could greatly improve the recovery of condensate oil in the gas reservoir,and the condensate oil recovery increased by 42% after 5 cycles of injection and production;the injected gas had significant evaporative and extraction effects on the condensate,especially during the first two cycles;the condensate oil saturation of the formation decreased with the increase of injection-production cycles,and the condensate oil saturation after multi-cycles of injection-production was almost 0;the storage capacity increased by about 7.5% after multi-cycles of injection and production,and the cumulative gas injection volume in the 5 th cycle increased by about 25%compared with that in the 1 st cycle.展开更多
Chemical looping dry reforming（CLDR） is an innovative technology for CO2 utilization using the chemical looping principle.The CLDR process consists of three stages,i.e.CH4 reduction,CO2 reforming,and air oxidation.S...Chemical looping dry reforming（CLDR） is an innovative technology for CO2 utilization using the chemical looping principle.The CLDR process consists of three stages,i.e.CH4 reduction,CO2 reforming,and air oxidation.Spinel nickel ferrite（NiFe2O4） was prepared and its multi-cycle performance as an oxygen carrier for CLDR was experimentally investigated.X-ray diffraction（XRD） and Laser Raman spectroscopy showed that a pure spinel crystalline phase（NiFe2O4） was obtained by a parallel flow co-precipitating method.NiFe2O4was reduced into Fe-Ni alloy and wustite（FexO） during the CH4 reduction process.Subsequent oxidation of the reduced oxygen carrier was performed with CO2 as an oxidant to form an intermediate state：a mixture of spinel Ni（1-x）Fe（2＋x）O4,Fe（2＋y）O4 and metallic Ni.And CO was generated in parallel during this stage.Approximate 185 mL of CO was generated for 1 g spinel NiFe2O4 in a single cycle.The intermediate oxygen carrier was fully oxidized in the air oxidation stage to form a mixture of Ni（1＋x）Fe（2-x）O4 and Fe2O3.Although the original state of oxygen carrier（NiFe2O4） was not fully regenerated and agglomeration was observed,a good recyclability was shown in 10 successive redox cycles.展开更多
Low oil prices under the influence of economic structure transformation and slow economic growth have hit the existing markets of traditional big oil suppliers and upgraded the conflict of oil production capacity and ...Low oil prices under the influence of economic structure transformation and slow economic growth have hit the existing markets of traditional big oil suppliers and upgraded the conflict of oil production capacity and interest between OPEC producers and other big oil supplier countries such as the USA and Russia. Forecasting global oil production is significant for all countries for energy strategy planning, although many past forecasts have later been proved to be very seriously incorrect. In this paper,the original generalized Weng model is expanded to a multi-cycle generalized Weng model to better reflect the multi-cycle phenomena caused by political, economic and technological factors. This is used to forecast global oil production based on parameter selection from a large sample, depletion rate of remaining resources, constraints on oil reserves and cycle number determination. This research suggests that the world will reach its peak oil production in 2022, at about 4340×10~6 tonnes. China needs to plan for oil import diversity, a domestic oil production structure based on the supply pattern of large oil suppliers worldwide and the oil demand for China＇s own development.展开更多
Permeability sensitivity to stress experiments were conducted on standard core samples taken from Wen 23 Gas Storage at multi-cycle injection and production conditions of the gas storage to study the change pattern of...Permeability sensitivity to stress experiments were conducted on standard core samples taken from Wen 23 Gas Storage at multi-cycle injection and production conditions of the gas storage to study the change pattern of stress sensitivity of permeability.A method for calculating permeability under overburden pressure in the multi-cycle injection and production process was proposed,and the effect of stress sensitivity of reservoir permeability on gas well injectivity and productivity in UGS was analyzed.Retention rate of permeability decreased sharply first and then slowly with the increase of the UGS cycles.The stress sensitivity index of permeability decreased with the increase of cycle number of net stress variations in the increase process of net stress.The stress sensitivity index of permeability hardly changed with the increase of cycle number of net stress variations in the decrease process of net stress.With the increase of cycle number of net stress variation,the stress sensitivity index of permeability in the increase process of net stress approached that in the decrease process of net stress.The lower the reservoir permeability,the greater the irreversible permeability loss rate,the stronger the cyclic stress sensitivity,and the higher the stress sensitivity index of the reservoir,the stronger the reservoir stress sensitivity.The gas zones with permeability lower than 0.3’10-3 mm2 are not suitable as gas storage regions.Stress sensitivity of reservoir permeability has strong impact on gas well injectivity and productivity and mainly in the first few cycles.展开更多
An efficient method for attosecond extreme ultraviolet source generation under the two-color multi-cycle weak pulse has been theoretically presented by using the concept of the plasmonic field enhancement in the vicin...An efficient method for attosecond extreme ultraviolet source generation under the two-color multi-cycle weak pulse has been theoretically presented by using the concept of the plasmonic field enhancement in the vicinity of metallic nanostructures. The results show that by properly choosing the inhomogeneity of the two-color multi-cycle(20 fs) weak pulse(1013W/cm2), not only the harmonic cutoff has been extended, resulting in a broadband XUV continuum, but also the single short quantum path has been selected to contribute to the harmonic. As a result, two isolated XUV pulses with durations of 68 as and 66 as can be obtained.展开更多
The second-order nonlinear optical susceptibilities β, βμ, and third-order non-linear optical susceptibilities γ, 〈γ〉 of a series of the novel push-pull multi-ring electro-photo polymer intermediates have been ...The second-order nonlinear optical susceptibilities β, βμ, and third-order non-linear optical susceptibilities γ, 〈γ〉 of a series of the novel push-pull multi-ring electro-photo polymer intermediates have been calculated. The influences of molecular structure, donor, acceptor and the frequency of external field on β and γ, and the relationship between γ and the number of thiophene rings (i. e. conjugated chain length) have been studied using INDO/SCI methods combined with sum-overstate (SOS) formula. The calculated results show that γ is proportional to 2.69 power of the chain length of the conjugated molecular bonds when the length is not quite long.展开更多
Gravel lateritic soils are intensively used in road geotechnical engineering. This material is largely representative of engineering soil all around the tropical African Countries [1,2]. Gravel lateritic soils from pa...Gravel lateritic soils are intensively used in road geotechnical engineering. This material is largely representative of engineering soil all around the tropical African Countries [1,2]. Gravel lateritic soils from parts of Burkina Faso and Senegal (West Africa) are used to determine the evolution of the geotechnical parameters from one to ten cycles of modified Proctor compaction. This test procedure is non-common for geotechnical purposes and it was found suitable and finally adopted to describe how these problematic soils behave when submitted to a multi-cyclic set of Modified Proctor compactions (OPM) [3,4]. On another hand, we propose a correlation between the traffic and the cycles of compaction considered as the repeated load. From that, this work shows the generation of active fine particles, the decrease of the CBR index and also the mechanical characteristics (mainly the Young Modulus, E) that contribute at least to the main deformation of the road structure.展开更多
Due to the strong unsteadiness of pulse detonation,large flow losses are generated when the detonation wave interacts with the turbine blades,resulting in low turbine efficiency.Considering that the flow losses are di...Due to the strong unsteadiness of pulse detonation,large flow losses are generated when the detonation wave interacts with the turbine blades,resulting in low turbine efficiency.Considering that the flow losses are dissipated into the gas as heat energy,some of them can be recycled during the expansion process in subsequent stages by the reheat effect,which should be helpful to improve the detonationdriven turbine efficiency.Taking this into account,this paper developed a numerical model of the detonation chamber coupled with a two-stage axial turbine,and a stoichiometric hydrogen-air mixture was used.The improvement in turbine efficiency attributable to the reheat effect was calculated by comparing the average efficiency of the stages with the efficiency of the two-stage turbine.The research indicated that the first stage was critical in suppressing the flow unsteadiness caused by pulse detonation,which stabilized the intake condition of the second stage and consequently allowed much of the flow losses from the first stage to be recycled,so that the efficiency of the two-stage turbine was improved.At a 95%confidence level,the efficiency improvement was stable at 4.5%—5.3%,demonstrating that the reheat effect is significant in improving the efficiency of the detonation-driven turbine.展开更多
Based on the recent oil and gas discoveries and geological understandings on the ultra-deep strata of sedimentary basins, the formation and occurrence of hydrocarbons in the ultra-deep strata were investigated with re...Based on the recent oil and gas discoveries and geological understandings on the ultra-deep strata of sedimentary basins, the formation and occurrence of hydrocarbons in the ultra-deep strata were investigated with respect to the processes of basin formation, hydrocarbon generation, reservoir formation and hydrocarbon accumulation, and key issues in ultra-deep oil and gas exploration were discussed. The ultra-deep strata in China underwent two extensional-convergent cycles in the Meso-Neoproterozoic Era and the Early Paleozoic Era respectively, with the tectonic-sedimentary differentiation producing the spatially adjacent source-reservoir assemblages. There are diverse large-scale carbonate reservoirs such as mound-beach, dolomite, karst fracture-vug, fractured karst and faulted zone, as well as over-pressured clastic rock and fractured bedrock reservoirs. Hydrocarbons were accumulated in multiple stages, accompanied by adjusting and finalizing in the late stage. The distribution of hydrocarbons is controlled by high-energy beach zone, regional unconformity, paleo-high and large-scale fault zone. The ultra-deep strata endow oil and gas resources as 33% of the remaining total resources, suggesting an important successive domain for hydrocarbon development in China. The large-scale pool-forming geologic units and giant hydrocarbon enrichment zones in ultra-deep strata are key and promising prospects for delivering successive discoveries. The geological conditions and enrichment zone prediction of ultra-deep oil and gas are key issues of petroleum geology.展开更多
Based on more than 20-year operation of gas storages with complex geological conditions and a series of research findings, the pressure-bearing dynamics mechanism of geological body is revealed. With the discovery of ...Based on more than 20-year operation of gas storages with complex geological conditions and a series of research findings, the pressure-bearing dynamics mechanism of geological body is revealed. With the discovery of gas-water flowing law of multi-cycle relative permeability hysteresis and differential utilization in zones, the extreme utilization theory targeting at the maximum amount of stored gas, maximum injection-production capacity and maximum efficiency in space utilization is proposed to support the three-in-one evaluation method of the maximum pressure-bearing capacity of geological body, maximum well production capacity and maximum peak shaving capacity of storage space. This study realizes the full potential of gas storage(storage capacity) at maximum pressure, maximum formation-wellbore coordinate production, optimum well spacing density match with finite-time unsteady flow, and peaking shaving capacity at minimum pressure, achieving perfect balance between security and capacity. Operation in gas storages, such as Hutubi in Xinjiang, Xiangguosi in Xinan, and Shuang6 in Liaohe, proves that extreme utilization theory has promoted high quality development of gas storages in China.展开更多
The high-speed multi-cycle impact and speed, load fluctuant characteristics of a kind of narrow-width automotive engine oil-pump chain 06BN-1 are studied through engine assembly and road-drive tests to satisfy the lig...The high-speed multi-cycle impact and speed, load fluctuant characteristics of a kind of narrow-width automotive engine oil-pump chain 06BN-1 are studied through engine assembly and road-drive tests to satisfy the light-weight demand of engine. The worn surface morphologies of rubbing area between pin, bush and roller are also analyzed based on scanning electron microscope. The results show that the main wear mechanism of automotive engine oil-pump chain is fatigue wear, and it＇s failure mechanism is the forming, extending and flaking of cracks on top layer of pin and bush. Pin and bush both occurred cycle-soften phenomenon, and roller occurred cycle-harden. Fretting wear is one of the most important ＂fall to pieces＂ failure causes of automotive chain. Ensuring sufficient strength and plasticity of roller, as well as adopting suitable shaping technology are the effective methods to increase its resistance to multi-cycle impact.展开更多
One-dimensional gas injection storage building and one-cycle injection-production modeling experiment,and two-dimensional flat core storage building and multi-cycle injection-production modeling experiment were carrie...One-dimensional gas injection storage building and one-cycle injection-production modeling experiment,and two-dimensional flat core storage building and multi-cycle injection-production modeling experiment were carried out using one-dimensional long core and large two-dimensional flat physical models to find out the effects of reservoir physical properties and injection-production balance time on reservoir pore utilization efficiency,effective reservoir capacity formation and capacity-reaching cycle.The results show that reservoir physical properties and formation water saturation are the main factors affecting the construction and operation of gas-reservoir type underground gas storage.During the construction and operation of gas-reservoir type gas storage,the reservoir space can be divided into three types of working zones:high efficiency,low efficiency and ineffective ones.The higher the reservoir permeability,the higher the pore utilization efficiency is,the smaller the ineffective working zone is,or there is no ineffective working zone;the smaller the loss of injected gas is,and the higher the utilization rate of pores is.The better the reservoir physical properties,the larger the reservoir space and the larger the final gas storage capacity is.The higher the water saturation of the reservoir,the more the gas loss during gas storage capacity building and operation is.Optimizing injection-production regime to discharge water and reduce water saturation is an effective way to reduce gas loss in gas storage.In the process of multiple cycles of injection and production,there is a reasonable injection-production balance time,further extending the injection-production balance period after reaching the reasonable time has little contribution to the expansion of gas storage capacity.展开更多
In order to provide effective guidance for optimizing and adjusting the maximum operation pressure and dynamic monitoring well pattern of underground gas storages(hereinafter referred as gas storages)and ensure the op...In order to provide effective guidance for optimizing and adjusting the maximum operation pressure and dynamic monitoring well pattern of underground gas storages(hereinafter referred as gas storages)and ensure the operation safety of gas storages,this paper takes Xinjiang H gas storage whose storage capacity and peak shaving capacity are the highest in China as the research object to establish a 3D fine geological model and a 3D dynamic geomechanical model in the regional scale of H gas storage based on the alternating change characteristics of geostress field during the high-speed cyclic injection and production of gas storage,combined with the geological,seismic,logging and various laboratory core experiment results.Then,the trap dynamic sealing capacity of H gas storage under the action of alternating stress after 14 years of depletion development of its original gas reservoir and long-term high-speed injection and production after its reconstruction from the gas reservoir was evaluated comprehensively.And the following research results were obtained.First,the change of the formation pressure in H gas storage has a significant effect on the regional geostress field.Second,after the development of the original H gas reservoir,the geostress on the two sides of the fault are greatly different,but the cap rock is not deformed and failed and the reservoir controlling fault as the gas bearing boundary doesn't glide,which ensures the safety of reconstructing H gas reservoir into gas storage.Third,due to the high-speed injection and production of H gas storage,the geostress field becomes more uneven,which has a potential negative impact on the integrity of the injection and production wells of the gas storage.Fourth,during the long-term high-speed injection and production operation of H gas reservoir,the cap rock does not undergo shear and tensile failure,but the numerical simulation of geomechanics shows that the long-term high-speed injection and production of the gas storage results in the relative sliding deformation(maximum about 5 cm)on both sides of H fault in the south of the reservoir,so the sealing capacity of H fault is a weak point impacting the integrity of the gas storage.Fifth,it is recommended to deploy monitoring wells at the upper block of H fault in the south of the gas storage to strengthen the injection and production dynamic monitoring.In conclusion,this study performs a qualitative and quantitative evaluation on the trap dynamic sealing capacity of gas storages rebuilt from gas reservoirs under the action of alternating stress,and it plays an important guiding role in ensuring the long-term injection and production safety of H gas storage.展开更多
Existing studies provide adequate petrological evidences on ca.500 Ma ultra-high pressure(UHP)metamorphism in the North Qinling Orogenic Belt(NQOB)in central China,but the genesis of 470-420 Ma multi-phase granulite-f...Existing studies provide adequate petrological evidences on ca.500 Ma ultra-high pressure(UHP)metamorphism in the North Qinling Orogenic Belt(NQOB)in central China,but the genesis of 470-420 Ma multi-phase granulite-facies metamorphism in the NQOB and their relationship with the ca.500 Ma UHP metamorphism remain controversial,resulting in the early Paleozoic evolution of the Qinling Orogenic Belt(QOB)highly debatable.In this study,we present mafic granulites and host felsic gneisses with a“red-eye socket”texture from the Shuanglong area,eastern NQOB,which recorded two phases of granulite-facies metamorphism superimposing on former eclogite-facies metamorphism.The former eclogite-facies metamorphism is indicated by eclogite-facies zircon trace element patterns and 496-495 Ma zircon ages,which are the same with those of the HP-UHP eclogite-facies metamorphic rocks in NQOB.The first granulite-facies metamorphism occurred at 460-448 Ma is characterized by coarse-grained minerals in matrix.Compositions and zonings of these minerals define an anticlockwise P-T path involving a prograde stage(751-763℃),a high-temperature peak stage(9.2 kbar and 864℃),and a near-isobaric cooling retrograde stage(8.3 kbar and 818℃).The second granulite-facies metamorphism occurred at 422-421 Ma is represented by coronal garnet and coexisting fine-grained mineral aggregates.Coronal garnet compositional zonings suggest a clockwise P-T path consisting of a high-pressure peak stage(9.5-11.2 kbar and 748-783℃)and a decompressing and heating retrograde stage(9.2-9.5 kbar and 789-800℃).Combining dating results of leucosomes in these rocks and existing data,we proposed a new model for early Paleozoic tectonic evolution of the NQOB.The North Qinling Terrane(NQT),probably separated from the South China Block(SCB)during the breakup of Rodinia,drifted northwards and underwent UHP metamorphism at 500 Ma and then rapidly exhumed to crust level.Later,the Shangdan Ocean subducted northwards beneath the exhumed NQT at 470-440 Ma,resulting in the first granulite-facies metamorphism and contemporaneous migmatization and magmatism.Finally,the closure of the Shangdan Ocean led to collision between the NQT and South Qinling Terrane/SCB and the second granulite-facies metamorphism and anatexis at 422-418 Ma.展开更多
基金Supported by National Key R&D Program of China(Grant No.2019YFE0121300)。
文摘Meshing temperature analyses of polymer gears reported in the literature mainly concern the effects of various material combinations and loading conditions,as their impacts could be seen in the first few meshing cycles.However,the effects of tooth geometry parameters could manifest as the meshing cycles increase.This study investigated the effects of tooth geometry parameters on the multi-cycle meshing temperature of polyoxymethylene(POM)worm gears,aiming to control the meshing temperature elevation by tuning the tooth geometry.Firstly,a finite element(FE)model capable of separately calculating the heat generation and simulating the heat propagation was established.Moreover,an adaptive iteration algorithm was proposed within the FE framework to capture the influence of the heat generation variation from cycle to cycle.This algorithm proved to be feasible and highly efficient compared with experimental results from the literature and simulated results via the full-iteration algorithm.Multi-cycle meshing temperature analyses were conducted on a series of POM worm gears with different tooth geometry parameters.The results reveal that,within the range of 14.5°to 25°,a pressure angle of 25°is favorable for reducing the peak surface temperature and overall body temperature of POM worm gears,which influence flank wear and load-carrying capability,respectively.However,addendum modification should be weighed because it helps with load bearing but increases the risk of severe flank wear.This paper proposes an efficient iteration algorithm for multi-cycle meshing temperature analysis of polymer gears and proves the feasibility of controlling the meshing temperature elevation during multiple cycles by tuning tooth geometry.
基金Supported by the National Natural Science Foundation of China(51974268)the PetroChina Science and Technology Major Project(2015E-4002)China Postdoctoral Science Foundation(2019M663563)。
文摘Based on the differences in production mode and operation process between gas storage and gas reservoir,we established a phase balance test procedure and a theoretical simulation model of phase balance during multi-cycles of injection and production of underground gas storage(UGS)rebuilt from condensate gas reservoir to study the phase characteristics of produced and remaining fluids during multi-cycles of injection and production.Take condensate reservoir gas storage as example,the composition of produced fluid and remaining fluid,phase state of remaining fluid,retrograde condensate saturation and condensate recovery degree in the process of multi-cycles of injection-production were studied through multi-cycle injection-production experiment and phase equilibrium theory simulation.The injected gas could greatly improve the recovery of condensate oil in the gas reservoir,and the condensate oil recovery increased by 42% after 5 cycles of injection and production;the injected gas had significant evaporative and extraction effects on the condensate,especially during the first two cycles;the condensate oil saturation of the formation decreased with the increase of injection-production cycles,and the condensate oil saturation after multi-cycles of injection-production was almost 0;the storage capacity increased by about 7.5% after multi-cycles of injection and production,and the cumulative gas injection volume in the 5 th cycle increased by about 25%compared with that in the 1 st cycle.
基金the financial support by the National Natural Science Foundation of China(51406214 and51406208)supported by the Natural science Foundation of Guangdong Province(2015A030313719)the Science&Technology Research Project of Guangdong Province(2013B050800008)
文摘Chemical looping dry reforming（CLDR） is an innovative technology for CO2 utilization using the chemical looping principle.The CLDR process consists of three stages,i.e.CH4 reduction,CO2 reforming,and air oxidation.Spinel nickel ferrite（NiFe2O4） was prepared and its multi-cycle performance as an oxygen carrier for CLDR was experimentally investigated.X-ray diffraction（XRD） and Laser Raman spectroscopy showed that a pure spinel crystalline phase（NiFe2O4） was obtained by a parallel flow co-precipitating method.NiFe2O4was reduced into Fe-Ni alloy and wustite（FexO） during the CH4 reduction process.Subsequent oxidation of the reduced oxygen carrier was performed with CO2 as an oxidant to form an intermediate state：a mixture of spinel Ni（1-x）Fe（2＋x）O4,Fe（2＋y）O4 and metallic Ni.And CO was generated in parallel during this stage.Approximate 185 mL of CO was generated for 1 g spinel NiFe2O4 in a single cycle.The intermediate oxygen carrier was fully oxidized in the air oxidation stage to form a mixture of Ni（1＋x）Fe（2-x）O4 and Fe2O3.Although the original state of oxygen carrier（NiFe2O4） was not fully regenerated and agglomeration was observed,a good recyclability was shown in 10 successive redox cycles.
基金financial support from the National Natural Science Foundation of China (Grant Nos. 71303258, 71373285, and 71503264)National Social Science Funds of China (13&ZD159)+1 种基金MOE (Ministry of Education in China) Project of Humanities and Social Sciences (13YJC630148, 15YJC630121)Science Foundation of China University of Petroleum, Beijing (ZX20150130)
文摘Low oil prices under the influence of economic structure transformation and slow economic growth have hit the existing markets of traditional big oil suppliers and upgraded the conflict of oil production capacity and interest between OPEC producers and other big oil supplier countries such as the USA and Russia. Forecasting global oil production is significant for all countries for energy strategy planning, although many past forecasts have later been proved to be very seriously incorrect. In this paper,the original generalized Weng model is expanded to a multi-cycle generalized Weng model to better reflect the multi-cycle phenomena caused by political, economic and technological factors. This is used to forecast global oil production based on parameter selection from a large sample, depletion rate of remaining resources, constraints on oil reserves and cycle number determination. This research suggests that the world will reach its peak oil production in 2022, at about 4340×10~6 tonnes. China needs to plan for oil import diversity, a domestic oil production structure based on the supply pattern of large oil suppliers worldwide and the oil demand for China＇s own development.
基金Supported by the Chongqing Technical Innovation and Application&Development Special Project(cstc2020jscx-msxmX0189)。
文摘Permeability sensitivity to stress experiments were conducted on standard core samples taken from Wen 23 Gas Storage at multi-cycle injection and production conditions of the gas storage to study the change pattern of stress sensitivity of permeability.A method for calculating permeability under overburden pressure in the multi-cycle injection and production process was proposed,and the effect of stress sensitivity of reservoir permeability on gas well injectivity and productivity in UGS was analyzed.Retention rate of permeability decreased sharply first and then slowly with the increase of the UGS cycles.The stress sensitivity index of permeability decreased with the increase of cycle number of net stress variations in the increase process of net stress.The stress sensitivity index of permeability hardly changed with the increase of cycle number of net stress variations in the decrease process of net stress.With the increase of cycle number of net stress variation,the stress sensitivity index of permeability in the increase process of net stress approached that in the decrease process of net stress.The lower the reservoir permeability,the greater the irreversible permeability loss rate,the stronger the cyclic stress sensitivity,and the higher the stress sensitivity index of the reservoir,the stronger the reservoir stress sensitivity.The gas zones with permeability lower than 0.3’10-3 mm2 are not suitable as gas storage regions.Stress sensitivity of reservoir permeability has strong impact on gas well injectivity and productivity and mainly in the first few cycles.
基金Supported by the Scientific Research Fund of Liaoning University of Technology of China under Grant No.X201319the Scientific Research Fund of Liaoning Provincial Education Department under Grant No.L2014242
文摘An efficient method for attosecond extreme ultraviolet source generation under the two-color multi-cycle weak pulse has been theoretically presented by using the concept of the plasmonic field enhancement in the vicinity of metallic nanostructures. The results show that by properly choosing the inhomogeneity of the two-color multi-cycle(20 fs) weak pulse(1013W/cm2), not only the harmonic cutoff has been extended, resulting in a broadband XUV continuum, but also the single short quantum path has been selected to contribute to the harmonic. As a result, two isolated XUV pulses with durations of 68 as and 66 as can be obtained.
基金Project supported by the National Natural Science Foundation of China (No. 29890210)
文摘The second-order nonlinear optical susceptibilities β, βμ, and third-order non-linear optical susceptibilities γ, 〈γ〉 of a series of the novel push-pull multi-ring electro-photo polymer intermediates have been calculated. The influences of molecular structure, donor, acceptor and the frequency of external field on β and γ, and the relationship between γ and the number of thiophene rings (i. e. conjugated chain length) have been studied using INDO/SCI methods combined with sum-overstate (SOS) formula. The calculated results show that γ is proportional to 2.69 power of the chain length of the conjugated molecular bonds when the length is not quite long.
文摘Gravel lateritic soils are intensively used in road geotechnical engineering. This material is largely representative of engineering soil all around the tropical African Countries [1,2]. Gravel lateritic soils from parts of Burkina Faso and Senegal (West Africa) are used to determine the evolution of the geotechnical parameters from one to ten cycles of modified Proctor compaction. This test procedure is non-common for geotechnical purposes and it was found suitable and finally adopted to describe how these problematic soils behave when submitted to a multi-cyclic set of Modified Proctor compactions (OPM) [3,4]. On another hand, we propose a correlation between the traffic and the cycles of compaction considered as the repeated load. From that, this work shows the generation of active fine particles, the decrease of the CBR index and also the mechanical characteristics (mainly the Young Modulus, E) that contribute at least to the main deformation of the road structure.
基金financially supported by the National Natural Science Foundation of China through Grant Nos.12372338 and U2241272the Natural Science Foundation of Shaanxi Province of China through Grant Nos.2023-JC-YB-352 and 2022JZ-20+1 种基金the Guangdong Basic and Applied Basic Research Foundation through Grant No.2023A1515011663the Practice and Innovation Funds for Graduate Students of Northwestern Polytechnical University through Grant No.PF2023010。
文摘Due to the strong unsteadiness of pulse detonation,large flow losses are generated when the detonation wave interacts with the turbine blades,resulting in low turbine efficiency.Considering that the flow losses are dissipated into the gas as heat energy,some of them can be recycled during the expansion process in subsequent stages by the reheat effect,which should be helpful to improve the detonationdriven turbine efficiency.Taking this into account,this paper developed a numerical model of the detonation chamber coupled with a two-stage axial turbine,and a stoichiometric hydrogen-air mixture was used.The improvement in turbine efficiency attributable to the reheat effect was calculated by comparing the average efficiency of the stages with the efficiency of the two-stage turbine.The research indicated that the first stage was critical in suppressing the flow unsteadiness caused by pulse detonation,which stabilized the intake condition of the second stage and consequently allowed much of the flow losses from the first stage to be recycled,so that the efficiency of the two-stage turbine was improved.At a 95%confidence level,the efficiency improvement was stable at 4.5%—5.3%,demonstrating that the reheat effect is significant in improving the efficiency of the detonation-driven turbine.
基金Supported by the National Natural Science Foundation of China(U19B6003-01,42330810).
文摘Based on the recent oil and gas discoveries and geological understandings on the ultra-deep strata of sedimentary basins, the formation and occurrence of hydrocarbons in the ultra-deep strata were investigated with respect to the processes of basin formation, hydrocarbon generation, reservoir formation and hydrocarbon accumulation, and key issues in ultra-deep oil and gas exploration were discussed. The ultra-deep strata in China underwent two extensional-convergent cycles in the Meso-Neoproterozoic Era and the Early Paleozoic Era respectively, with the tectonic-sedimentary differentiation producing the spatially adjacent source-reservoir assemblages. There are diverse large-scale carbonate reservoirs such as mound-beach, dolomite, karst fracture-vug, fractured karst and faulted zone, as well as over-pressured clastic rock and fractured bedrock reservoirs. Hydrocarbons were accumulated in multiple stages, accompanied by adjusting and finalizing in the late stage. The distribution of hydrocarbons is controlled by high-energy beach zone, regional unconformity, paleo-high and large-scale fault zone. The ultra-deep strata endow oil and gas resources as 33% of the remaining total resources, suggesting an important successive domain for hydrocarbon development in China. The large-scale pool-forming geologic units and giant hydrocarbon enrichment zones in ultra-deep strata are key and promising prospects for delivering successive discoveries. The geological conditions and enrichment zone prediction of ultra-deep oil and gas are key issues of petroleum geology.
基金Supported by the PetroChina Scientific Research and Technology Development Project (2022DJ83)。
文摘Based on more than 20-year operation of gas storages with complex geological conditions and a series of research findings, the pressure-bearing dynamics mechanism of geological body is revealed. With the discovery of gas-water flowing law of multi-cycle relative permeability hysteresis and differential utilization in zones, the extreme utilization theory targeting at the maximum amount of stored gas, maximum injection-production capacity and maximum efficiency in space utilization is proposed to support the three-in-one evaluation method of the maximum pressure-bearing capacity of geological body, maximum well production capacity and maximum peak shaving capacity of storage space. This study realizes the full potential of gas storage(storage capacity) at maximum pressure, maximum formation-wellbore coordinate production, optimum well spacing density match with finite-time unsteady flow, and peaking shaving capacity at minimum pressure, achieving perfect balance between security and capacity. Operation in gas storages, such as Hutubi in Xinjiang, Xiangguosi in Xinan, and Shuang6 in Liaohe, proves that extreme utilization theory has promoted high quality development of gas storages in China.
基金This project is supported by National Innovation Foundation for Technology Based Firms, China (No. 01C26213300872)
文摘The high-speed multi-cycle impact and speed, load fluctuant characteristics of a kind of narrow-width automotive engine oil-pump chain 06BN-1 are studied through engine assembly and road-drive tests to satisfy the light-weight demand of engine. The worn surface morphologies of rubbing area between pin, bush and roller are also analyzed based on scanning electron microscope. The results show that the main wear mechanism of automotive engine oil-pump chain is fatigue wear, and it＇s failure mechanism is the forming, extending and flaking of cracks on top layer of pin and bush. Pin and bush both occurred cycle-soften phenomenon, and roller occurred cycle-harden. Fretting wear is one of the most important ＂fall to pieces＂ failure causes of automotive chain. Ensuring sufficient strength and plasticity of roller, as well as adopting suitable shaping technology are the effective methods to increase its resistance to multi-cycle impact.
基金Supported by the the National Natural Science Foundation of China(No.52074318)PetroChina Company Limited Key Program for Science and Technology Development(kt2020-16-01).
文摘One-dimensional gas injection storage building and one-cycle injection-production modeling experiment,and two-dimensional flat core storage building and multi-cycle injection-production modeling experiment were carried out using one-dimensional long core and large two-dimensional flat physical models to find out the effects of reservoir physical properties and injection-production balance time on reservoir pore utilization efficiency,effective reservoir capacity formation and capacity-reaching cycle.The results show that reservoir physical properties and formation water saturation are the main factors affecting the construction and operation of gas-reservoir type underground gas storage.During the construction and operation of gas-reservoir type gas storage,the reservoir space can be divided into three types of working zones:high efficiency,low efficiency and ineffective ones.The higher the reservoir permeability,the higher the pore utilization efficiency is,the smaller the ineffective working zone is,or there is no ineffective working zone;the smaller the loss of injected gas is,and the higher the utilization rate of pores is.The better the reservoir physical properties,the larger the reservoir space and the larger the final gas storage capacity is.The higher the water saturation of the reservoir,the more the gas loss during gas storage capacity building and operation is.Optimizing injection-production regime to discharge water and reduce water saturation is an effective way to reduce gas loss in gas storage.In the process of multiple cycles of injection and production,there is a reasonable injection-production balance time,further extending the injection-production balance period after reaching the reasonable time has little contribution to the expansion of gas storage capacity.
基金Project supported by PetroChina’s Major Science and Technology Project“Study and Application of the Key Technologies of UGS Geology and Reservoir Engineering”(No.2015E-4002).
文摘In order to provide effective guidance for optimizing and adjusting the maximum operation pressure and dynamic monitoring well pattern of underground gas storages(hereinafter referred as gas storages)and ensure the operation safety of gas storages,this paper takes Xinjiang H gas storage whose storage capacity and peak shaving capacity are the highest in China as the research object to establish a 3D fine geological model and a 3D dynamic geomechanical model in the regional scale of H gas storage based on the alternating change characteristics of geostress field during the high-speed cyclic injection and production of gas storage,combined with the geological,seismic,logging and various laboratory core experiment results.Then,the trap dynamic sealing capacity of H gas storage under the action of alternating stress after 14 years of depletion development of its original gas reservoir and long-term high-speed injection and production after its reconstruction from the gas reservoir was evaluated comprehensively.And the following research results were obtained.First,the change of the formation pressure in H gas storage has a significant effect on the regional geostress field.Second,after the development of the original H gas reservoir,the geostress on the two sides of the fault are greatly different,but the cap rock is not deformed and failed and the reservoir controlling fault as the gas bearing boundary doesn't glide,which ensures the safety of reconstructing H gas reservoir into gas storage.Third,due to the high-speed injection and production of H gas storage,the geostress field becomes more uneven,which has a potential negative impact on the integrity of the injection and production wells of the gas storage.Fourth,during the long-term high-speed injection and production operation of H gas reservoir,the cap rock does not undergo shear and tensile failure,but the numerical simulation of geomechanics shows that the long-term high-speed injection and production of the gas storage results in the relative sliding deformation(maximum about 5 cm)on both sides of H fault in the south of the reservoir,so the sealing capacity of H fault is a weak point impacting the integrity of the gas storage.Fifth,it is recommended to deploy monitoring wells at the upper block of H fault in the south of the gas storage to strengthen the injection and production dynamic monitoring.In conclusion,this study performs a qualitative and quantitative evaluation on the trap dynamic sealing capacity of gas storages rebuilt from gas reservoirs under the action of alternating stress,and it plays an important guiding role in ensuring the long-term injection and production safety of H gas storage.
基金supported by the National Natural Science Foundation of China(Grants Nos.42372074,42030307,41972058 and 41802056)Natural Science Basic Research Program of Shaanxi(Program Nos.2023-JC-QN-0366 and 2023-JC-YB-254)the MOST Special Fund from the State Key Laboratory of Continental Dynamics.
文摘Existing studies provide adequate petrological evidences on ca.500 Ma ultra-high pressure(UHP)metamorphism in the North Qinling Orogenic Belt(NQOB)in central China,but the genesis of 470-420 Ma multi-phase granulite-facies metamorphism in the NQOB and their relationship with the ca.500 Ma UHP metamorphism remain controversial,resulting in the early Paleozoic evolution of the Qinling Orogenic Belt(QOB)highly debatable.In this study,we present mafic granulites and host felsic gneisses with a“red-eye socket”texture from the Shuanglong area,eastern NQOB,which recorded two phases of granulite-facies metamorphism superimposing on former eclogite-facies metamorphism.The former eclogite-facies metamorphism is indicated by eclogite-facies zircon trace element patterns and 496-495 Ma zircon ages,which are the same with those of the HP-UHP eclogite-facies metamorphic rocks in NQOB.The first granulite-facies metamorphism occurred at 460-448 Ma is characterized by coarse-grained minerals in matrix.Compositions and zonings of these minerals define an anticlockwise P-T path involving a prograde stage(751-763℃),a high-temperature peak stage(9.2 kbar and 864℃),and a near-isobaric cooling retrograde stage(8.3 kbar and 818℃).The second granulite-facies metamorphism occurred at 422-421 Ma is represented by coronal garnet and coexisting fine-grained mineral aggregates.Coronal garnet compositional zonings suggest a clockwise P-T path consisting of a high-pressure peak stage(9.5-11.2 kbar and 748-783℃)and a decompressing and heating retrograde stage(9.2-9.5 kbar and 789-800℃).Combining dating results of leucosomes in these rocks and existing data,we proposed a new model for early Paleozoic tectonic evolution of the NQOB.The North Qinling Terrane(NQT),probably separated from the South China Block(SCB)during the breakup of Rodinia,drifted northwards and underwent UHP metamorphism at 500 Ma and then rapidly exhumed to crust level.Later,the Shangdan Ocean subducted northwards beneath the exhumed NQT at 470-440 Ma,resulting in the first granulite-facies metamorphism and contemporaneous migmatization and magmatism.Finally,the closure of the Shangdan Ocean led to collision between the NQT and South Qinling Terrane/SCB and the second granulite-facies metamorphism and anatexis at 422-418 Ma.
