Objective:To establish HPLC fingerprints of different parts of chicory stems,leaves,roots,flowers and seeds,and compare the similarities and differences of chemical components in different parts,so as to provide a sci...Objective:To establish HPLC fingerprints of different parts of chicory stems,leaves,roots,flowers and seeds,and compare the similarities and differences of chemical components in different parts,so as to provide a scientific basis for the comprehensive utilization of chicory.Methods:To establish the HPLC fingerprint of chicory,the chromatographic column was chosen with Agilent ZORBAX Eclipse XDB-C_(18),the mobile phase was methanol(A)-0.2%formic acid(B),the flow rate was 1 mL/min,the column temperature was 30℃,and the detection wavelength was 254 nm.The Similarity Evaluation System of Chromatographic Fingerprint of Traditional Chinese Medicine(2012 Edition)was used to evaluate the similarity of different parts of decoction pieces,and the determination method of multi-component content was established based on fingerprint identification chromatographic peaks,and the determination results were analyzed.Results:The HPLC fingerprinting method of chicory was established.Sixteen chromatographic peaks were identified and 10 of them were identified as:caftaric acid(1),esculin(2),chlorogenic acid(3),esculetin(4),caffeic acid(5),cichoric acid(8),hyperoside(11),rutin(12),isochlorogenic acid C(14)and luteolin(16).The similarity of different parts was 0.084–0.701.At the same time,the total content of detected chemical components was ranked as flower>leaf>stem>root>seed.Roots did not contain caftaric acid,rutin,and luteolin,flowers did not contain luteolin,and seeds did not contain caftaric acid,cichoric acid,and luteolin.The content of cichoric acid in leaves was the most,and esculin in flowers was the most.Conclusion:The results of HPLC fingerprint and multi-component content determination revealed the similarity and difference of different parts of chicory from chemical composition,indicating that there were certain differences in different parts of chicory.The established HPLC fingerprinting method can provide a reference for quality control and evaluation of different parts of the chicory.展开更多
[Objectives]This study was conducted to establish a method of quantitative analysis of multi-components by single marker(QAMS)for the simultaneous determination of such seven chemical components as gallic acid,epicate...[Objectives]This study was conducted to establish a method of quantitative analysis of multi-components by single marker(QAMS)for the simultaneous determination of such seven chemical components as gallic acid,epicatechin,catechin,ferulic acid,chlorogenic acid,rutin and caffeic acid in Vidal grape.[Methods]The high performance liquid chromatography was carried out using a COSMOSIL C18-MS-II column(4.6 mm×250 mm,5μm)with the mobile phase acetonitrile-2%acetic acid aqueous solution(gradient elution)at a flow rate of 1.0 ml/min.The detection wavelength was 280 nm,and the column temperature was 25℃.Using caffeic acid as an internal reference,the relative correction factors between it and other six to-be-detected components,and the contents of the seven components were calculated using the correction factors.The established was compared the results with the external standard method to verify the feasibility and accuracy of the method.[Results]The seven components had a good linear relationship in the ranges of 1.060-10.60,1.419-14.19,1.062-10.62,0.2950-2.950,0.1019-1.019,0.2014-2.014,and 0.1498-1.498μg,respectively,and the relative correction factors of gallic acid,epicatechin,catechin,ferulic acid,chlorogenic acid and rutin were 0.9760,0.7806,0.3277,1.640,1.161,2.778,respectively.There was no significant difference between the results of the QAMS method and the external standard method.[Conclusions]The QAMS method using caffeic acid as an internal reference is accurate and feasible,and provides a reliable method for the quality evaluation of Vidal ice grape.展开更多
In the realm of nonlinear integrable systems,the presence of decompositions facilitates the establishment of linear superposition solutions and the derivation of novel coupled systems exhibiting nonlinear integrabilit...In the realm of nonlinear integrable systems,the presence of decompositions facilitates the establishment of linear superposition solutions and the derivation of novel coupled systems exhibiting nonlinear integrability.By focusing on single-component decompositions within the potential BKP hierarchy,it has been observed that specific linear superpositions of decomposition solutions remain consistent with the underlying equations.Moreover,through the implementation of multi-component decompositions within the potential BKP hierarchy,successful endeavors have been undertaken to formulate linear superposition solutions and novel coupled Kd V-type systems that resist decoupling via alterations in dependent variables.展开更多
Multi-component transition group metal borides(MMB_(2))have become a research hotspot due to their new composition design concepts and superior properties compared with conventional ceramics.Most of the current method...Multi-component transition group metal borides(MMB_(2))have become a research hotspot due to their new composition design concepts and superior properties compared with conventional ceramics.Most of the current methods,however,are complicated and time-consuming,the mass production remains a chal-lenge.Herein,we proposed a new high-efficiency strategy for synthesis of MMB_(2)using molten aluminum as the medium for the first time.The prepared Al-containing multi-component borides(TiZrHfNbTa)B_(2)microcrystals had a homogeneous composition with a hexagonal AlB_(2)structure and ultra-high hardness value of∼35.3 GPa,which was much higher than data reported in the literature and the rule of mix-ture estimations.Furthermore,combined with the First-principles calculation results,we found that the Poisson’s ratio(v)values exhibit a clearly ascending trend from 0.17 at VEC=3.5 to 0.18 at VEC=3.4,then to 0.201 at VEC=3.2 with the increasing of Al content.This indicates that the intrinsic toughness of multi-component boride microcrystals is obviously enhanced by the trace-doped Al elements.Besides,the fabricated Al-containing multi-component boride microcrystals have superior oxidation activation en-ergy and structural stability.The enhanced oxidation resistance is mainly attributed to the formation of a protective Al2 O3 oxide layer and the lattice distortion,both of which lead to sluggish diffusion of O_(2).These findings propose a new unexplored avenue for the fabrication of MMB_(2)materials with supe-rior comprehensive performance including ultra-hardness and intrinsically improved thermo-mechanical properties.展开更多
Hydrogels,owing to their porous network structure resembling the extracellular matrix(ECM),have become essential scaffold materials in the field of cartilage tissue engineering.Among them,gelatin methacrylate(GelMA)hy...Hydrogels,owing to their porous network structure resembling the extracellular matrix(ECM),have become essential scaffold materials in the field of cartilage tissue engineering.Among them,gelatin methacrylate(GelMA)hydrogels are widely used in bioink development due to their excellent biocompatibility,biodegradability,and tunable photo-crosslinking properties.However,the high biocompatibility of pure GelMA often comes at the cost of mechanical strength,limiting its applicability in cartilage regeneration.To overcome this trade-off,this study developed composite bioinks based on GelMA,silk fibroin(SF),and polyethylene oxide(PEO)for fabricating porous hydrogel scaffolds,which were then systematically characterized in terms of morphology,porosity,hydrophilicity,mechanical strength,rheological behavior,printability,and cytocompatibility.In this design,PEO serves as a porogen to generate highly porous structures(porosity up to 88%),while SF compensates for the mechanical loss caused by PEO,enabling the scaffold to retain a compression strength of up to 29.10 kPa.Among the tested formulations,the 10%GelMA/1%SF/1.5%PEO(1%=0.01 g/mL)bioink exhibited excellent printability,mechanical integrity,and cytocompatibility,and it supported a robust deposition of collagenⅡand aggrecan by chondrocytes after printing.This work provides a versatile strategy for balancing the biocompatibility and mechanical robustness in bioinks,offering a promising platform for next-generation cartilage tissue engineering scaffolds.展开更多
The hardening mechanism of multi-component carbide ceramic has been investigated in detail through a combination of experiments,first-principles calculations,and ab initio molecular dynamics(AIMD).Eight dense carbide ...The hardening mechanism of multi-component carbide ceramic has been investigated in detail through a combination of experiments,first-principles calculations,and ab initio molecular dynamics(AIMD).Eight dense carbide ceramics were prepared by spark plasma sintering.Compulsorily,all the multi-component carbide samples have similar carbon content,grain size,and uniform compositional distribution by optimizing the sintering process and adjusting the initial raw materials.Hence the interference of other factors on the hardness of multi-component carbide ceramics is minimized.The effects of changes in the elemental species on the lattice distortion,bond strength,bonding properties,and electronic structure of multi-component carbide ceramics were thoroughly analyzed.These results show that the hardening of multi-component carbide ceramic can be attributed to the coupling of solid solution strengthening caused by lattice distortion and covalent bond strengthening.Besides,the“host lattice”of multi-component carbide ceramics is defined based on the concept of supporting lattice.The present work is of great significance for a deeper understanding of the hardening mechanism of multi-component carbide ceramics and the design of superhard multi-component carbides.展开更多
A convenient photocatalytic multi-component reaction of alkenes,quinoxalin-2(1H)-ones,and diazo compounds has been developed in the presence of water.A number of ester-containing quinoxalin-2(1H)-ones could be efficie...A convenient photocatalytic multi-component reaction of alkenes,quinoxalin-2(1H)-ones,and diazo compounds has been developed in the presence of water.A number of ester-containing quinoxalin-2(1H)-ones could be efficiently obtained in moderate to good yields at room temperature.This metal-free visiblelight-driven tandem reaction was conducted through proton-coupled electron transfer(PCET)process using water as the hydrogen donor and 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene(4CzIPN)as the photocatalyst.展开更多
Background:Investigators from low-,middle-,and high-income countries representing 6 continents contributed to the development of the Global Adolescent and Child Physical Activity Questionnaire(GAC-PAQ).The GAC-PAQ is ...Background:Investigators from low-,middle-,and high-income countries representing 6 continents contributed to the development of the Global Adolescent and Child Physical Activity Questionnaire(GAC-PAQ).The GAC-PAQ is designed to assess physical activity(PA)across all key domains(i.e.,school,chores,work/volunteering,transport,free time,outdoor time).It aimed to address multiple gaps in global PA surveillance(e.g.,omission of important PA domains,insufficient cultural adaptation,underrepresentation of rural areas in questionnaire validation studies).The purpose of this study was to assess the content validity of the GAC-PAQ among PA experts,8-to 17-year-olds,and one of their parents/guardians,and to discuss changes made to the questionnaire based on participants'feedback.Methods:Sixty-two experts in PA measurement and/or surveillance from 24 countries completed an online survey that included both closed-and open-ended questions about the content validity of the GAC-PAQ.The proportion of experts who agreed or strongly agreed with the items was calculated.Child-parent/guardian dyads from 15 countries(n=250;10-40 per country)participated in a structured cognitive interview to assess the clarity of the questions and response options,and they were encouraged to provide suggestions to improve clarity and facilitate completion of the questionnaire.Participating countries are:Aotearoa New Zealand,Brazil,Canada,China,Colombia,Czech Republic,India,Malawi,Mexico,Nepal,Nigeria,Spain,Sweden,Thailand,and the United Arab Emirates.Interviews were conducted in 13 different languages and structured by PA domain.Generic images were included to help participants in answering questions about PA intensity.Results:Expert agreement with the items for each domain exceeded 75%,and their qualitative feedback was used to revise the questionnaire before cognitive interviews.In general,participants found the questionnaire to be comprehensive.Adolescents(12-17 years)found it easier than children(8-11 years)to answer the questions.Several children struggled to answer questions about the duration and intensity of activities and/or concepts related to travel modes,active trips,and organized activities.Many parents/guardians were unsure about the frequency,duration,and intensity of their children's or adolescents'PA at school and/or recommended using more culturally relevant and appropriate images.Some participants misunderstood the concept of activities that“make you stronger”(intended to assess resistance activities)and/or struggled to differentiate between work,volunteering,and chores.Conclusion:Participants'feedback was used to develop a revised,simplified,and culturally adapted GAC-PAQ,which will be pilot-tested in all15 countries in an App that will include country-specific images and narration in local languages.Further research is needed to assess the reliability and validity of the revised GAC-PAQ.展开更多
Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study invest...Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.展开更多
The Yellow Sea and Bohai Sea are among the global shelf seas susceptible to typhoons every year.Using observations and high-resolution numerical simulations,the current study investigates the dramatic changes in tempe...The Yellow Sea and Bohai Sea are among the global shelf seas susceptible to typhoons every year.Using observations and high-resolution numerical simulations,the current study investigates the dramatic changes in temperature and ocean heat content(OHC)of the Yellow Sea and Bohai Sea caused by Super Typhoon Maysak in early September 2020,which is representative of northward/northeastward-bypassing typhoons with centers just to the east of the study area.Temperature shows spatially coherent cooling in the upper mixed layer but warming in the subsurface layer in the majority of the offshore waters,due to wind-enhanced vertical mixing.In lower layers from the thermocline to sea bottom,temperature experiences significant warming in northeastern coastal waters of the Shandong Peninsula and in regions just off the Subei Shoal,but significant cooling in western coastal waters of the Korean Peninsula and southern coastal waters of the Shandong Peninsula.Significant temperature warming/cooling in lower layers is caused by coastal downwelling/upwelling.The total OHC of the study area decreases rapidly during Typhoon Maysak(2020)’s passage,which is generated comparably by latent heat loss at the sea surface and southward heat advection out of the study area at the southern boundary.Reduced shortwave radiation contributes positively but secondarily to the decreasing OHC during the first day.A numerical experiment suggests that Typhoon Maysak(2020)-induced OHC decline could have greatly affected the regional climate evolution in the following seasons.More studies are needed to fully understand the impacts of typhoons on regional climate changes in shelf seas at different time scales.展开更多
Slope units are divided according to the real topography and have clear geological characteristics,making them ideal units for evaluating the susceptibility to geological disasters.Based on the results of automaticall...Slope units are divided according to the real topography and have clear geological characteristics,making them ideal units for evaluating the susceptibility to geological disasters.Based on the results of automatically and manually corrected hydrological slope unit division,the Longhua District,Shenzhen City,Guangdong Province,was selected as the study area.A total of 15 influencing factors,namely Fluctuation,slope,slope aspect,curvature,topographic witness index(TWI),stream power index(SPI),topographic roughness index(TRI),annual average rainfall,distance to water system,engineering rock group,distance to fault,land use,normalized difference vegetation index(NDVI),nighttime light,and distance to road,were selected as evaluation indicators.The information volume model(IV)and random points were used to select non-geological disaster units,and then the random forest model(RF)was used to evaluate the susceptibility to geological disasters.The automatic slope unit and the hydrological slope unit were compared and analyzed in the random forest and information volume random forest models.The results show that the area under the curve(AUC)values of the automatic slope unit evaluation results are 0.931 for the IV-RF model and 0.716 for the RF model,which are 0.6%(IV-RF model)and 1.9%(RF model)higher than those for the hydrological slope unit.Based on a comparison of the evaluation methods based on the two types of slope units,the hydrological slope unit evaluation method based on manual correction is highly subjective,is complicated to operate,and has a low evaluation accuracy,whereas the evaluation method based on automatic slope unit division is efficient and accurate,is suitable for large-scale efficient geological disaster evaluation,and can better deal with the problem of geological disaster susceptibility evaluation.展开更多
Urban forests are highly multifunctional and provide numerous ecological functions.Plant functional traits individually or jointly influence the ecological multifunctionality of tree species(TS-EMF)and can also modify...Urban forests are highly multifunctional and provide numerous ecological functions.Plant functional traits individually or jointly influence the ecological multifunctionality of tree species(TS-EMF)and can also modify TSEMF in response to environmental changes.However,there has been limited exploration of multitrait combinations for predicting TS-EMF across seasons and of trait thresholds that enhance TS-EMF.Here,for 10 dominant tree species in urban forests of Northeast China,14 traits were measured and four aboveground and three belowground ecological functions assessed in three seasons.Ecological functions and TS-EMF differed significantly throughout the seasons(P<0.05).Synergistic relationships were found between carbon sequestration and oxygen release,between cooling and humidification,and between organic carbon accumulation and nutrient cycling.Notably,aboveground multifunctionality played a leading role in TS-EMF.With seasonal changes,resource allocation shifted toward traits related to resource acquisition rather than conservation to maintain TS-EMF.The combination of traits that predicted TS-EMF varied by type,accounting for up to 66.45%of the variation.TS-EMF was primarily driven by leaf structure in spring and by nutrient accumulation in autumn.Leaf carbon content(LCC)consistently served as a stabilizing factor for predicting TS-EMF across seasons.At 36.5-36.8 mg g^(-1),LCC had its optimal effect on TS-EMF.Other traits in combination that positively influence total TS-EMF include leaf nitrogen content(3.43-3.45 mg g^(-1)),leaf phosphorus content(0.80-0.83 mg g^(-1)),and leaf area(65.86-68.43 cm^(2)).Within these specified trait thresholds,Morus alba and Quercus mongolica were identified as key species.These findings suggest that the trade-off between various ecological functions can be managed by altering plant traits across seasons.This approach could provide a theoretical foundation for enhancing the TS-EMF of urban forests through trait-based management,offering practical guidance for selecting tree species.展开更多
Extreme climate events(e.g.,heatwaves and droughts)are becoming increasingly frequent due to global climate change,which inevitably affects tree growth and various other ecological processes.While the impacts of droug...Extreme climate events(e.g.,heatwaves and droughts)are becoming increasingly frequent due to global climate change,which inevitably affects tree growth and various other ecological processes.While the impacts of droughts on these processes have been widely evaluated,the effects of heatwaves on tree growth and soil water content(SWC)remain poorly understood,particularly those related to thinning treatment.In this study,we evaluated the impacts of the 2021 Pacific Northwest Heatwave and thinning on forest growth and SWC,as well as assessed how thinning might mitigate the heatwave's impacts in lodgepole pine forests in British Columbia,Canada.We measured meteorological data(air temperature,rainfall,solar radiation(SR),relative humidity(RH),and wind speed(W_(s)),sap flow,SWC,soil temperature(T_(s)),and tree diameters at the breast height(DBH)during the growing season(June–September)in the control(27,000 stems·ha^(-1)),lightly thinned(4,500 stems·ha^(-1)),and heavily thinned(1,100 stems·ha^(-1))experimental plots from 2018 to 2024.We found that thinning persistently and significantly(p<0.05)increased individual tree growth,with the most pronounced effects in the heavily thinned stands.The 2021 Pacific Northwest Heatwave led to an exceptionally hot growing season,significantly(p<0.05)reducing forest growth and SWC across all plots.Forest growth recovered in 2022 in the thinned plots but remained suppressed in the unthinned plots,suggesting that thinning effectively mitigated the impact of the heatwave on forest growth,while the heatwave's impacts were persistent in the unthinned plots.Our study highlights that thinning is a practical management strategy for improving tree growth and supporting climate change adaptation to extreme climate events.展开更多
Objective: to establish multi-components by single marker (QAMS) and HPlC method for the determination of four substances (R, S) - Epigoitrin, Vitexicarpin, Indirubin and Artemisetin and to provide experimental basis ...Objective: to establish multi-components by single marker (QAMS) and HPlC method for the determination of four substances (R, S) - Epigoitrin, Vitexicarpin, Indirubin and Artemisetin and to provide experimental basis for the quality standard of Compound Yizhihao Granules. Methods: the sample treatment method was improved, and HPLC external standard method was established for the determination of four substances in Compound Yizhihao Granules. The chromatographic column was Wondersil C18 (4.6mm×250mm, 5μm), the flow rate was 1.0mL/min, the check wavelength was 245nm, the column temperature was 30℃, the sample was 20 μL, the mobile phase was acetonitrile-water. The relative correction factors (RCF) of (R, S) - Epigoitrin, Vitexicarpin, Artemisetin were determined with Indirubin as internal reference. The RCF was used to calculate the content of the substance under test, and then the content of the substance under test was determined by the external standard method to verify the feasibility of the multi-components by single marker. Results: the treatment method of the test sample was as follows: solid-liquid ratio was 1:5. Ultrasound was 45 min, trichloromethane extraction, and steam dry concentration with methanol constant volume. The results showed that the good linear ranges of (R, S) - Epigoitrin, Vitexicarpin, Indirubin and Artemisetin were 5.15-103 μ g / mL, 5.005-100.1 μ g / mL, 0.5-10 μ g / mL and 0.5115-10.23 μ g / mL, respectively. The average recoveries were 95.19%, 95.73%, 90.75%, 91.65%. The relative correction factors (RCF) of (R, S) - Epigoitrin, Vitexicarpin, Artemisetin were determined with Indirubin as internal reference was 0.2%, 0.6% and 0.3%. And the relative error of multi-components by single marker and external standard method was less than 1%. Conclusion: the multi-components by single marker method (QAMS) is simple, stable and can be used for the determination of multiple substances in Compound Yizhihao Granules.展开更多
A multi-component system has the long fixed maintenance time, so the opportunistic maintenance policy is adopted to put preventive replacement and corrective replacement together, so that the long fixed maintenance ti...A multi-component system has the long fixed maintenance time, so the opportunistic maintenance policy is adopted to put preventive replacement and corrective replacement together, so that the long fixed maintenance time can be shared by more than one component, and the system availability can be improved. Then, the generation characteristics of the random failure time are researched based on the replacement maintenance and the minima[ maintenance. Furthermore, by choosing the opportunistic replacement ages of each component as opti- mized variables, a simulation algorithm based on an opportunistic maintenance policy is designed to maximize the total availability. Finally, the simulation result shows the validity of the algorithm by an example.展开更多
This review focuses on the recent research progress in the multi-component assembly of luminescent rare earth hybrid materials, which is based on the luminescent rare earth compounds and two or more other building uni...This review focuses on the recent research progress in the multi-component assembly of luminescent rare earth hybrid materials, which is based on the luminescent rare earth compounds and two or more other building units, including the other photoactive species. It covers the multi-component luminescent rare earth hybrids which was assembled with different(a) organic-inorganic polymeric units,(b)nanoporous units,(c) nanoparticle composites or(d) other developing special units. Finally, future challenges and opportunities in this field are discussed. Herein it mainly focuses on the work of Yan's group in recent years.展开更多
A general scheme for generating a multi-component integrable equation hierarchy is proposed. A simple 3M- dimensional loop algebra ~X is produced. By taking advantage of ~X a new isospectral problem is established and...A general scheme for generating a multi-component integrable equation hierarchy is proposed. A simple 3M- dimensional loop algebra ~X is produced. By taking advantage of ~X a new isospectral problem is established and then by making use of the Tu scheme the multi-component Dirac equation hierarchy is obtained. Finally, an expanding loop algebra ~FM of the loop algebra ~X is presented. Based on the ~FM, the multi-component integrable coupling system of the multi-component Dirac equation hierarchy is investigated. The method in this paper can be applied to other nonlinear evolution equation hierarchies.展开更多
Seismic AVO analysis now is one of the major criteria for recognizing potential hydrocarbon reservoirs. Volume scattering information that carries information of stratigraphic structure, lithology, and pore fluid is m...Seismic AVO analysis now is one of the major criteria for recognizing potential hydrocarbon reservoirs. Volume scattering information that carries information of stratigraphic structure, lithology, and pore fluid is more useful for seismic exploration. However, traditional AVO analysis is based on the Zoeppritz equation, which only contains single-interface information. Quantitative interpretation of the thin bed thickness is essential to thin bed structure interpretation, reservoir description, and lateral reservoir prediction. The reflectance spectrum equation based on the elastic wave propagation matrix in the frequency domain derived in this paper shows that both interfaces and intervals have an effect on amplitude. The equation includes information about both single interfaces and volume scattering. Since the reflectance spectrum equation is a continuous function of thin bed thickness and frequency, it is convenient to analyze the effects of a single frequency and bed thickness on the reflectance spectrum. Bed thickness is analyzable until the bed thickness is vanishingly small. These characteristics can＇t be achieved by Fourier transform. The propagation of seismic waves is complex and various wave modes exist simultaneously. The reflectance spectrum includes various propagating wave modes and multiples and is better for simulating multi-component thin bed AVO responses than the ray tracing method.展开更多
The conventional digital core models are usually small in size and have difficulty in representing the complex structures of heterogeneous rocks;Therefore,the parameters of simulated rock physics are difficult to be r...The conventional digital core models are usually small in size and have difficulty in representing the complex structures of heterogeneous rocks;Therefore,the parameters of simulated rock physics are difficult to be referenced.In this study,we propose a feasible simulation method for obtaining multi-scale and multi-component digital cores based on three types of sandstone samples.In the proposed method,the plug and subplug samples are scanned via micro-computed tomography at different resolutions.Furthermore,the images are precisely registered using the proposed hybrid image registration method.In case of high-resolution images,the traditional segmentation method is used to segment the cores into pores and minerals.Subsequently,we established the relations between the gray values and the porosity/mineral content in case of the low-resolution images based on the registered domains and the relation curves were applied to the segmentation of the low-resolution images.The core images constitute the multi-scale and multi-component digital core models after segmentation.Further,the elastic properties of the three samples were simulated at both fine and coarse scales based on the multi-scale and multi-component digital core models,and four component models were considered.The results show that the multi-scale and multi-component digital core models can overcome the representative limits of the conventional digital core models and accurately characterize pores and minerals at different scales.The numerical results of the elastic modulus are more representative at large scales,and considerably reliable results can be obtained by appropriately considering the minerals.展开更多
The influence of melt superheating treatment on the solid/liquid （S/L） interface morphology of directionally solidified Ni-based superalloy DZ125 is investigated to elucidate the relationship between melt characteri...The influence of melt superheating treatment on the solid/liquid （S/L） interface morphology of directionally solidified Ni-based superalloy DZ125 is investigated to elucidate the relationship between melt characteristic and S/L interface stability. The results indicate that the interface morphology is not only related to the withdrawal velocity （R） but also to the melt superheating temperature （Ts） when the thermal gradient of solidification interface remains constant for different Ts with appropriate superheating treatment regulation. The interface morphology changes from cell to plane at R of 1.1 μm/s when Ts increases from 1500°C to 1650°C, and maintains plane with further elevated Ts of 1750°C. However, the interface morphology changes from coarse dendrite to cell and then to cellular dendrite at R of 2.25 μm/s when Ts increases from 1500°C to 1650°C and then to 1750°C. It is proved that the solidification onset temperature and the solidification interval undergo the nonlinear variation when Ts increases from 1500°C to 1680°C, and the turning point is 1650°C at which the solidification onset temperature and the solidification interval are all minimum. This indicates that the melt superheating treatment enhances the solidification interface stability and has important effect on the solidification characteristics.展开更多
基金financial support of the industry special project for the public welfare of the State Administration of Traditional Chinese Medicine of China(00104296)。
文摘Objective:To establish HPLC fingerprints of different parts of chicory stems,leaves,roots,flowers and seeds,and compare the similarities and differences of chemical components in different parts,so as to provide a scientific basis for the comprehensive utilization of chicory.Methods:To establish the HPLC fingerprint of chicory,the chromatographic column was chosen with Agilent ZORBAX Eclipse XDB-C_(18),the mobile phase was methanol(A)-0.2%formic acid(B),the flow rate was 1 mL/min,the column temperature was 30℃,and the detection wavelength was 254 nm.The Similarity Evaluation System of Chromatographic Fingerprint of Traditional Chinese Medicine(2012 Edition)was used to evaluate the similarity of different parts of decoction pieces,and the determination method of multi-component content was established based on fingerprint identification chromatographic peaks,and the determination results were analyzed.Results:The HPLC fingerprinting method of chicory was established.Sixteen chromatographic peaks were identified and 10 of them were identified as:caftaric acid(1),esculin(2),chlorogenic acid(3),esculetin(4),caffeic acid(5),cichoric acid(8),hyperoside(11),rutin(12),isochlorogenic acid C(14)and luteolin(16).The similarity of different parts was 0.084–0.701.At the same time,the total content of detected chemical components was ranked as flower>leaf>stem>root>seed.Roots did not contain caftaric acid,rutin,and luteolin,flowers did not contain luteolin,and seeds did not contain caftaric acid,cichoric acid,and luteolin.The content of cichoric acid in leaves was the most,and esculin in flowers was the most.Conclusion:The results of HPLC fingerprint and multi-component content determination revealed the similarity and difference of different parts of chicory from chemical composition,indicating that there were certain differences in different parts of chicory.The established HPLC fingerprinting method can provide a reference for quality control and evaluation of different parts of the chicory.
基金Natural Science Foundation Project of Liaoning Provincial Science and Technology Department(20180550846)。
文摘[Objectives]This study was conducted to establish a method of quantitative analysis of multi-components by single marker(QAMS)for the simultaneous determination of such seven chemical components as gallic acid,epicatechin,catechin,ferulic acid,chlorogenic acid,rutin and caffeic acid in Vidal grape.[Methods]The high performance liquid chromatography was carried out using a COSMOSIL C18-MS-II column(4.6 mm×250 mm,5μm)with the mobile phase acetonitrile-2%acetic acid aqueous solution(gradient elution)at a flow rate of 1.0 ml/min.The detection wavelength was 280 nm,and the column temperature was 25℃.Using caffeic acid as an internal reference,the relative correction factors between it and other six to-be-detected components,and the contents of the seven components were calculated using the correction factors.The established was compared the results with the external standard method to verify the feasibility and accuracy of the method.[Results]The seven components had a good linear relationship in the ranges of 1.060-10.60,1.419-14.19,1.062-10.62,0.2950-2.950,0.1019-1.019,0.2014-2.014,and 0.1498-1.498μg,respectively,and the relative correction factors of gallic acid,epicatechin,catechin,ferulic acid,chlorogenic acid and rutin were 0.9760,0.7806,0.3277,1.640,1.161,2.778,respectively.There was no significant difference between the results of the QAMS method and the external standard method.[Conclusions]The QAMS method using caffeic acid as an internal reference is accurate and feasible,and provides a reliable method for the quality evaluation of Vidal ice grape.
基金sponsored by the National Natural Science Foundations of China under Grant Nos.12301315,12235007,11975131the Zhejiang Provincial Natural Science Foundation of China under Grant No.LQ20A010009。
文摘In the realm of nonlinear integrable systems,the presence of decompositions facilitates the establishment of linear superposition solutions and the derivation of novel coupled systems exhibiting nonlinear integrability.By focusing on single-component decompositions within the potential BKP hierarchy,it has been observed that specific linear superpositions of decomposition solutions remain consistent with the underlying equations.Moreover,through the implementation of multi-component decompositions within the potential BKP hierarchy,successful endeavors have been undertaken to formulate linear superposition solutions and novel coupled Kd V-type systems that resist decoupling via alterations in dependent variables.
基金financially supported by the National Natural Science Foundation of China(Nos.52271033 and 52071179)the Key program of National Natural Science Foundation of China(No.51931003)+2 种基金Natural Science Foundation of Jiangsu Province,China(No.BK20221493)Jiangsu Province Leading Edge Technology Basic Research Major Project(No.BK20222014)Foundation of“Qinglan Project”for Colleges and Universities in Jiangsu Province.
文摘Multi-component transition group metal borides(MMB_(2))have become a research hotspot due to their new composition design concepts and superior properties compared with conventional ceramics.Most of the current methods,however,are complicated and time-consuming,the mass production remains a chal-lenge.Herein,we proposed a new high-efficiency strategy for synthesis of MMB_(2)using molten aluminum as the medium for the first time.The prepared Al-containing multi-component borides(TiZrHfNbTa)B_(2)microcrystals had a homogeneous composition with a hexagonal AlB_(2)structure and ultra-high hardness value of∼35.3 GPa,which was much higher than data reported in the literature and the rule of mix-ture estimations.Furthermore,combined with the First-principles calculation results,we found that the Poisson’s ratio(v)values exhibit a clearly ascending trend from 0.17 at VEC=3.5 to 0.18 at VEC=3.4,then to 0.201 at VEC=3.2 with the increasing of Al content.This indicates that the intrinsic toughness of multi-component boride microcrystals is obviously enhanced by the trace-doped Al elements.Besides,the fabricated Al-containing multi-component boride microcrystals have superior oxidation activation en-ergy and structural stability.The enhanced oxidation resistance is mainly attributed to the formation of a protective Al2 O3 oxide layer and the lattice distortion,both of which lead to sluggish diffusion of O_(2).These findings propose a new unexplored avenue for the fabrication of MMB_(2)materials with supe-rior comprehensive performance including ultra-hardness and intrinsically improved thermo-mechanical properties.
基金supported by the Project(No.JCKY2024408C010)the Shanxi Province Key Research and Development Project(No.202302130501006)+4 种基金the National Natural Science Foundation of China(Nos.82403350,51975400,62031022)the Shanxi Provincial Key Medical Scientific Research Project(No.2020XM06)the Shanxi Provincial Basic Research Project(No.202103021223040)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(No.2021L044)the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(No.2022SX-TD026),China.
文摘Hydrogels,owing to their porous network structure resembling the extracellular matrix(ECM),have become essential scaffold materials in the field of cartilage tissue engineering.Among them,gelatin methacrylate(GelMA)hydrogels are widely used in bioink development due to their excellent biocompatibility,biodegradability,and tunable photo-crosslinking properties.However,the high biocompatibility of pure GelMA often comes at the cost of mechanical strength,limiting its applicability in cartilage regeneration.To overcome this trade-off,this study developed composite bioinks based on GelMA,silk fibroin(SF),and polyethylene oxide(PEO)for fabricating porous hydrogel scaffolds,which were then systematically characterized in terms of morphology,porosity,hydrophilicity,mechanical strength,rheological behavior,printability,and cytocompatibility.In this design,PEO serves as a porogen to generate highly porous structures(porosity up to 88%),while SF compensates for the mechanical loss caused by PEO,enabling the scaffold to retain a compression strength of up to 29.10 kPa.Among the tested formulations,the 10%GelMA/1%SF/1.5%PEO(1%=0.01 g/mL)bioink exhibited excellent printability,mechanical integrity,and cytocompatibility,and it supported a robust deposition of collagenⅡand aggrecan by chondrocytes after printing.This work provides a versatile strategy for balancing the biocompatibility and mechanical robustness in bioinks,offering a promising platform for next-generation cartilage tissue engineering scaffolds.
基金financially supported by the National Natural Science Foundation of China(Nos.52032002,52372060,51972081,and U22A20128)the National Safety Academic Foundation(No.U2130103)+1 种基金the National Key Laboratory of Precision Hot Processing of Metals(No.61429092300305)Heilongjiang Touyan Team Program are gratefully acknowledged.
文摘The hardening mechanism of multi-component carbide ceramic has been investigated in detail through a combination of experiments,first-principles calculations,and ab initio molecular dynamics(AIMD).Eight dense carbide ceramics were prepared by spark plasma sintering.Compulsorily,all the multi-component carbide samples have similar carbon content,grain size,and uniform compositional distribution by optimizing the sintering process and adjusting the initial raw materials.Hence the interference of other factors on the hardness of multi-component carbide ceramics is minimized.The effects of changes in the elemental species on the lattice distortion,bond strength,bonding properties,and electronic structure of multi-component carbide ceramics were thoroughly analyzed.These results show that the hardening of multi-component carbide ceramic can be attributed to the coupling of solid solution strengthening caused by lattice distortion and covalent bond strengthening.Besides,the“host lattice”of multi-component carbide ceramics is defined based on the concept of supporting lattice.The present work is of great significance for a deeper understanding of the hardening mechanism of multi-component carbide ceramics and the design of superhard multi-component carbides.
基金supported by Sichuan Science and Technology Program(No.2023NSFSC0101)the 2024 Provincial platform project of Chengdu Normal University(No.GNFZ202404)+1 种基金Natural Science Foundation of Shandong Province(No.ZR2021MB065)National Natural Science Foundation of China(No.22101237)。
文摘A convenient photocatalytic multi-component reaction of alkenes,quinoxalin-2(1H)-ones,and diazo compounds has been developed in the presence of water.A number of ester-containing quinoxalin-2(1H)-ones could be efficiently obtained in moderate to good yields at room temperature.This metal-free visiblelight-driven tandem reaction was conducted through proton-coupled electron transfer(PCET)process using water as the hydrogen donor and 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene(4CzIPN)as the photocatalyst.
基金supported by a Project Grant(Grant No.PJT183705)an Early Career Investigator Prize(Grant No.ECP 184184)from the Canadian Institutes of Health Research+7 种基金a Prentice Institute Research Affiliate Fund Grant from the Prentice Institute for Global Population and Economy(Grant No.G00004116)a Te Herenga Waka Victoria University of Wellington Division of Science Health Engineering Architecture and Design Innovation Faculty Strategic Research Grant(Grant No.FSRG-SHEADI-10724)The Thailand Physical Activity Knowledge Development Centre(TPAK)/Thai Health Promotion Foundation provided funding for the cognitive interviews and pilot study in Thailand(Grant No.66-P1-0473)The University Pablo de Olavide provided a scholarship for 2 undergraduate students working on the project(codes PPI2207 and PPI2308)In the Czech Republicthe study was supported by Palacky University IGA(Grant No.IGA_FTK_2023_017)supported by the Division of Intramural Research at the National Institute on Minority Health and Health Disparities of the National Institutes of Healthsupported by the Key Project of the National Philosophy and Social Science Foundation of China(23&ZD197)。
文摘Background:Investigators from low-,middle-,and high-income countries representing 6 continents contributed to the development of the Global Adolescent and Child Physical Activity Questionnaire(GAC-PAQ).The GAC-PAQ is designed to assess physical activity(PA)across all key domains(i.e.,school,chores,work/volunteering,transport,free time,outdoor time).It aimed to address multiple gaps in global PA surveillance(e.g.,omission of important PA domains,insufficient cultural adaptation,underrepresentation of rural areas in questionnaire validation studies).The purpose of this study was to assess the content validity of the GAC-PAQ among PA experts,8-to 17-year-olds,and one of their parents/guardians,and to discuss changes made to the questionnaire based on participants'feedback.Methods:Sixty-two experts in PA measurement and/or surveillance from 24 countries completed an online survey that included both closed-and open-ended questions about the content validity of the GAC-PAQ.The proportion of experts who agreed or strongly agreed with the items was calculated.Child-parent/guardian dyads from 15 countries(n=250;10-40 per country)participated in a structured cognitive interview to assess the clarity of the questions and response options,and they were encouraged to provide suggestions to improve clarity and facilitate completion of the questionnaire.Participating countries are:Aotearoa New Zealand,Brazil,Canada,China,Colombia,Czech Republic,India,Malawi,Mexico,Nepal,Nigeria,Spain,Sweden,Thailand,and the United Arab Emirates.Interviews were conducted in 13 different languages and structured by PA domain.Generic images were included to help participants in answering questions about PA intensity.Results:Expert agreement with the items for each domain exceeded 75%,and their qualitative feedback was used to revise the questionnaire before cognitive interviews.In general,participants found the questionnaire to be comprehensive.Adolescents(12-17 years)found it easier than children(8-11 years)to answer the questions.Several children struggled to answer questions about the duration and intensity of activities and/or concepts related to travel modes,active trips,and organized activities.Many parents/guardians were unsure about the frequency,duration,and intensity of their children's or adolescents'PA at school and/or recommended using more culturally relevant and appropriate images.Some participants misunderstood the concept of activities that“make you stronger”(intended to assess resistance activities)and/or struggled to differentiate between work,volunteering,and chores.Conclusion:Participants'feedback was used to develop a revised,simplified,and culturally adapted GAC-PAQ,which will be pilot-tested in all15 countries in an App that will include country-specific images and narration in local languages.Further research is needed to assess the reliability and validity of the revised GAC-PAQ.
基金funded by the Natural Science Foundation of China(Grants No 42277127)。
文摘Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.
基金supported by the National Key Research and Development Program of China(Grant Nos.2022YFF0801400 and 2021YFF0704002)the Shandong Provincial Natural Science Foundation(Grant No.ZR2024LQX002)the National Science Foundation of China(Grant No.42176016).
文摘The Yellow Sea and Bohai Sea are among the global shelf seas susceptible to typhoons every year.Using observations and high-resolution numerical simulations,the current study investigates the dramatic changes in temperature and ocean heat content(OHC)of the Yellow Sea and Bohai Sea caused by Super Typhoon Maysak in early September 2020,which is representative of northward/northeastward-bypassing typhoons with centers just to the east of the study area.Temperature shows spatially coherent cooling in the upper mixed layer but warming in the subsurface layer in the majority of the offshore waters,due to wind-enhanced vertical mixing.In lower layers from the thermocline to sea bottom,temperature experiences significant warming in northeastern coastal waters of the Shandong Peninsula and in regions just off the Subei Shoal,but significant cooling in western coastal waters of the Korean Peninsula and southern coastal waters of the Shandong Peninsula.Significant temperature warming/cooling in lower layers is caused by coastal downwelling/upwelling.The total OHC of the study area decreases rapidly during Typhoon Maysak(2020)’s passage,which is generated comparably by latent heat loss at the sea surface and southward heat advection out of the study area at the southern boundary.Reduced shortwave radiation contributes positively but secondarily to the decreasing OHC during the first day.A numerical experiment suggests that Typhoon Maysak(2020)-induced OHC decline could have greatly affected the regional climate evolution in the following seasons.More studies are needed to fully understand the impacts of typhoons on regional climate changes in shelf seas at different time scales.
文摘Slope units are divided according to the real topography and have clear geological characteristics,making them ideal units for evaluating the susceptibility to geological disasters.Based on the results of automatically and manually corrected hydrological slope unit division,the Longhua District,Shenzhen City,Guangdong Province,was selected as the study area.A total of 15 influencing factors,namely Fluctuation,slope,slope aspect,curvature,topographic witness index(TWI),stream power index(SPI),topographic roughness index(TRI),annual average rainfall,distance to water system,engineering rock group,distance to fault,land use,normalized difference vegetation index(NDVI),nighttime light,and distance to road,were selected as evaluation indicators.The information volume model(IV)and random points were used to select non-geological disaster units,and then the random forest model(RF)was used to evaluate the susceptibility to geological disasters.The automatic slope unit and the hydrological slope unit were compared and analyzed in the random forest and information volume random forest models.The results show that the area under the curve(AUC)values of the automatic slope unit evaluation results are 0.931 for the IV-RF model and 0.716 for the RF model,which are 0.6%(IV-RF model)and 1.9%(RF model)higher than those for the hydrological slope unit.Based on a comparison of the evaluation methods based on the two types of slope units,the hydrological slope unit evaluation method based on manual correction is highly subjective,is complicated to operate,and has a low evaluation accuracy,whereas the evaluation method based on automatic slope unit division is efficient and accurate,is suitable for large-scale efficient geological disaster evaluation,and can better deal with the problem of geological disaster susceptibility evaluation.
基金supported by the National Natural Science Foundation(32130068,32271634,and 32071597)CAS Key Laboratory of Forest Ecology and Silviculture,Institute of Applied Ecology,Chinese Academy of Sciences(KLFES-2025)。
文摘Urban forests are highly multifunctional and provide numerous ecological functions.Plant functional traits individually or jointly influence the ecological multifunctionality of tree species(TS-EMF)and can also modify TSEMF in response to environmental changes.However,there has been limited exploration of multitrait combinations for predicting TS-EMF across seasons and of trait thresholds that enhance TS-EMF.Here,for 10 dominant tree species in urban forests of Northeast China,14 traits were measured and four aboveground and three belowground ecological functions assessed in three seasons.Ecological functions and TS-EMF differed significantly throughout the seasons(P<0.05).Synergistic relationships were found between carbon sequestration and oxygen release,between cooling and humidification,and between organic carbon accumulation and nutrient cycling.Notably,aboveground multifunctionality played a leading role in TS-EMF.With seasonal changes,resource allocation shifted toward traits related to resource acquisition rather than conservation to maintain TS-EMF.The combination of traits that predicted TS-EMF varied by type,accounting for up to 66.45%of the variation.TS-EMF was primarily driven by leaf structure in spring and by nutrient accumulation in autumn.Leaf carbon content(LCC)consistently served as a stabilizing factor for predicting TS-EMF across seasons.At 36.5-36.8 mg g^(-1),LCC had its optimal effect on TS-EMF.Other traits in combination that positively influence total TS-EMF include leaf nitrogen content(3.43-3.45 mg g^(-1)),leaf phosphorus content(0.80-0.83 mg g^(-1)),and leaf area(65.86-68.43 cm^(2)).Within these specified trait thresholds,Morus alba and Quercus mongolica were identified as key species.These findings suggest that the trade-off between various ecological functions can be managed by altering plant traits across seasons.This approach could provide a theoretical foundation for enhancing the TS-EMF of urban forests through trait-based management,offering practical guidance for selecting tree species.
基金supported by the British Columbia Ministry of Forces through long-term annual contracts with University of British Columbia(Okanagan)(No.RE25SIR242)the Natural Sciences and Engineering Research Council of Canada(NSERC),Discovery Grants Program(No.RGPIN-2021-02628)+1 种基金supported by the China Postdoctoral Science Foundation(No.2024M760387)Heilongjiang Postdoctoral Financial Assistance(No.LBH-Z24062)。
文摘Extreme climate events(e.g.,heatwaves and droughts)are becoming increasingly frequent due to global climate change,which inevitably affects tree growth and various other ecological processes.While the impacts of droughts on these processes have been widely evaluated,the effects of heatwaves on tree growth and soil water content(SWC)remain poorly understood,particularly those related to thinning treatment.In this study,we evaluated the impacts of the 2021 Pacific Northwest Heatwave and thinning on forest growth and SWC,as well as assessed how thinning might mitigate the heatwave's impacts in lodgepole pine forests in British Columbia,Canada.We measured meteorological data(air temperature,rainfall,solar radiation(SR),relative humidity(RH),and wind speed(W_(s)),sap flow,SWC,soil temperature(T_(s)),and tree diameters at the breast height(DBH)during the growing season(June–September)in the control(27,000 stems·ha^(-1)),lightly thinned(4,500 stems·ha^(-1)),and heavily thinned(1,100 stems·ha^(-1))experimental plots from 2018 to 2024.We found that thinning persistently and significantly(p<0.05)increased individual tree growth,with the most pronounced effects in the heavily thinned stands.The 2021 Pacific Northwest Heatwave led to an exceptionally hot growing season,significantly(p<0.05)reducing forest growth and SWC across all plots.Forest growth recovered in 2022 in the thinned plots but remained suppressed in the unthinned plots,suggesting that thinning effectively mitigated the impact of the heatwave on forest growth,while the heatwave's impacts were persistent in the unthinned plots.Our study highlights that thinning is a practical management strategy for improving tree growth and supporting climate change adaptation to extreme climate events.
文摘Objective: to establish multi-components by single marker (QAMS) and HPlC method for the determination of four substances (R, S) - Epigoitrin, Vitexicarpin, Indirubin and Artemisetin and to provide experimental basis for the quality standard of Compound Yizhihao Granules. Methods: the sample treatment method was improved, and HPLC external standard method was established for the determination of four substances in Compound Yizhihao Granules. The chromatographic column was Wondersil C18 (4.6mm×250mm, 5μm), the flow rate was 1.0mL/min, the check wavelength was 245nm, the column temperature was 30℃, the sample was 20 μL, the mobile phase was acetonitrile-water. The relative correction factors (RCF) of (R, S) - Epigoitrin, Vitexicarpin, Artemisetin were determined with Indirubin as internal reference. The RCF was used to calculate the content of the substance under test, and then the content of the substance under test was determined by the external standard method to verify the feasibility of the multi-components by single marker. Results: the treatment method of the test sample was as follows: solid-liquid ratio was 1:5. Ultrasound was 45 min, trichloromethane extraction, and steam dry concentration with methanol constant volume. The results showed that the good linear ranges of (R, S) - Epigoitrin, Vitexicarpin, Indirubin and Artemisetin were 5.15-103 μ g / mL, 5.005-100.1 μ g / mL, 0.5-10 μ g / mL and 0.5115-10.23 μ g / mL, respectively. The average recoveries were 95.19%, 95.73%, 90.75%, 91.65%. The relative correction factors (RCF) of (R, S) - Epigoitrin, Vitexicarpin, Artemisetin were determined with Indirubin as internal reference was 0.2%, 0.6% and 0.3%. And the relative error of multi-components by single marker and external standard method was less than 1%. Conclusion: the multi-components by single marker method (QAMS) is simple, stable and can be used for the determination of multiple substances in Compound Yizhihao Granules.
文摘A multi-component system has the long fixed maintenance time, so the opportunistic maintenance policy is adopted to put preventive replacement and corrective replacement together, so that the long fixed maintenance time can be shared by more than one component, and the system availability can be improved. Then, the generation characteristics of the random failure time are researched based on the replacement maintenance and the minima[ maintenance. Furthermore, by choosing the opportunistic replacement ages of each component as opti- mized variables, a simulation algorithm based on an opportunistic maintenance policy is designed to maximize the total availability. Finally, the simulation result shows the validity of the algorithm by an example.
基金Project supported by the National Natural Science Foundation of China(21571142)the Developing Science Fund of Tongji University,the Natural Science Foundation of Zhejiang Province(LQ14B010001)the Natural Science Foundation of Ningbo,China(2016A610105)
文摘This review focuses on the recent research progress in the multi-component assembly of luminescent rare earth hybrid materials, which is based on the luminescent rare earth compounds and two or more other building units, including the other photoactive species. It covers the multi-component luminescent rare earth hybrids which was assembled with different(a) organic-inorganic polymeric units,(b)nanoporous units,(c) nanoparticle composites or(d) other developing special units. Finally, future challenges and opportunities in this field are discussed. Herein it mainly focuses on the work of Yan's group in recent years.
文摘A general scheme for generating a multi-component integrable equation hierarchy is proposed. A simple 3M- dimensional loop algebra ~X is produced. By taking advantage of ~X a new isospectral problem is established and then by making use of the Tu scheme the multi-component Dirac equation hierarchy is obtained. Finally, an expanding loop algebra ~FM of the loop algebra ~X is presented. Based on the ~FM, the multi-component integrable coupling system of the multi-component Dirac equation hierarchy is investigated. The method in this paper can be applied to other nonlinear evolution equation hierarchies.
基金The research was supported by the Notion's Fifteenth Scientific and Technological Breakthrough Project: Research of Vector and Mountain Seismic Exploration (No.2001BA605A-12).
文摘Seismic AVO analysis now is one of the major criteria for recognizing potential hydrocarbon reservoirs. Volume scattering information that carries information of stratigraphic structure, lithology, and pore fluid is more useful for seismic exploration. However, traditional AVO analysis is based on the Zoeppritz equation, which only contains single-interface information. Quantitative interpretation of the thin bed thickness is essential to thin bed structure interpretation, reservoir description, and lateral reservoir prediction. The reflectance spectrum equation based on the elastic wave propagation matrix in the frequency domain derived in this paper shows that both interfaces and intervals have an effect on amplitude. The equation includes information about both single interfaces and volume scattering. Since the reflectance spectrum equation is a continuous function of thin bed thickness and frequency, it is convenient to analyze the effects of a single frequency and bed thickness on the reflectance spectrum. Bed thickness is analyzable until the bed thickness is vanishingly small. These characteristics can＇t be achieved by Fourier transform. The propagation of seismic waves is complex and various wave modes exist simultaneously. The reflectance spectrum includes various propagating wave modes and multiples and is better for simulating multi-component thin bed AVO responses than the ray tracing method.
基金supported by the National Natural Science Foundation of China Research(Nos.41574122 and 41374124)National Science and Technology major Project(No.2016ZX05006002-004)。
文摘The conventional digital core models are usually small in size and have difficulty in representing the complex structures of heterogeneous rocks;Therefore,the parameters of simulated rock physics are difficult to be referenced.In this study,we propose a feasible simulation method for obtaining multi-scale and multi-component digital cores based on three types of sandstone samples.In the proposed method,the plug and subplug samples are scanned via micro-computed tomography at different resolutions.Furthermore,the images are precisely registered using the proposed hybrid image registration method.In case of high-resolution images,the traditional segmentation method is used to segment the cores into pores and minerals.Subsequently,we established the relations between the gray values and the porosity/mineral content in case of the low-resolution images based on the registered domains and the relation curves were applied to the segmentation of the low-resolution images.The core images constitute the multi-scale and multi-component digital core models after segmentation.Further,the elastic properties of the three samples were simulated at both fine and coarse scales based on the multi-scale and multi-component digital core models,and four component models were considered.The results show that the multi-scale and multi-component digital core models can overcome the representative limits of the conventional digital core models and accurately characterize pores and minerals at different scales.The numerical results of the elastic modulus are more representative at large scales,and considerably reliable results can be obtained by appropriately considering the minerals.
基金supports from the National Natural Science Foundation of China (Grant No. 50931004)the National Basic Research Program of China (Grant Nos. 2011CB610406 and 2010CB631202)the National High Technology Research and Development Program (Grant No. 2007AA03Z552)
文摘The influence of melt superheating treatment on the solid/liquid （S/L） interface morphology of directionally solidified Ni-based superalloy DZ125 is investigated to elucidate the relationship between melt characteristic and S/L interface stability. The results indicate that the interface morphology is not only related to the withdrawal velocity （R） but also to the melt superheating temperature （Ts） when the thermal gradient of solidification interface remains constant for different Ts with appropriate superheating treatment regulation. The interface morphology changes from cell to plane at R of 1.1 μm/s when Ts increases from 1500°C to 1650°C, and maintains plane with further elevated Ts of 1750°C. However, the interface morphology changes from coarse dendrite to cell and then to cellular dendrite at R of 2.25 μm/s when Ts increases from 1500°C to 1650°C and then to 1750°C. It is proved that the solidification onset temperature and the solidification interval undergo the nonlinear variation when Ts increases from 1500°C to 1680°C, and the turning point is 1650°C at which the solidification onset temperature and the solidification interval are all minimum. This indicates that the melt superheating treatment enhances the solidification interface stability and has important effect on the solidification characteristics.
