Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspher...Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspheres.And modification of the pore structure is one of the effective strategies.In this study,multi-cavity mesoporous carbon microspheres were successfully synthesized by the synergistic method of soft and hard templates,during which a phenolic resin with superior thermal stability was employed as the carbon precursor and a mixture of silica sol and F108 as the mesoporous template.Carbon microspheres with multi-cavity mesoporous structures were prepared,and all the samples showed highly even mesopores,with diameters around 12 nm.The diameter of these microspheres decreased from 396.8 nm to about 182.5 nm with the increase of silica sol.After CO_(2) activation,these novel carbon microspheres(APCF0.5-S1.75)demonstrated high specific surface area(983.3 m^(2)/g)and remarkable CO_(2) uptake of 4.93 mmol/g at 0℃ and1 bar.This could be attributed to the unique multi-cavity structure,which offers uniform mesoporous pore channels,minimal CO_(2) transport of and a greater number of active sites for CO_(2) adsorption.展开更多
The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficien...The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.展开更多
The kerosene-fueled Scramjet with multi-cavity combustor has the potential to serve aspropulsion system for hypersonic flight.However,the impact of injection positions on combustionperformance and mechanism at high Ma...The kerosene-fueled Scramjet with multi-cavity combustor has the potential to serve aspropulsion system for hypersonic flight.However,the impact of injection positions on combustionperformance and mechanism at high Mach numbers remains uncertain.Therefore,a comparativestudy was conducted using numerical methods to explore multi-cavity Scramjet combustor perfor-mance at a flight Mach number 7.0 with different injection positions.The combustor is equippedwith 6 cavities arranged in three groups along the flow direction,each consisting of two cavities per-pendicular to the flow.It is shown that the injection location significantly influences combustionperformance:Front-injection yields higher combustion efficiency than post-injection,but post-injection is advantageous for the intake start.Additionally,regardless of injection positions,themainstream flow state near the cavities behind the injection can be categorized as supersonic flow,supersonic-subsonic coexistence flow,and subsonic flow.The optimal length from the downstreamto the trailing edge of the cavities behind the injection for achieving maximum combustion effi-ciency is determined.Further extension beyond this optimal length does not significantly increasethe combustion efficiency.In addition,the optimal length varies with different injection positions-specifically,it is about 60%longer with post-injection conditions than with front-injection con-ditions in this investigation.Moreover,significant secondary combustion within the cavities leadingto improved efficiency only occurs when mainstream flow state is either supersonic flow orsupersonic-subsonic coexistence flow.Also,with a well-optimized design,the kerosene-fueledmulti-cavity Scramjet can achieve enhanced combustion efficiency,which shows relatively smallvariation across a wide range of equivalence ratios.This might be caused by the effects of interac-tion among these multiple cavities.Therefore,these research findings can provide valuable insightsfor designing and optimizing the kerosene-fueled multi-cavity combustor in Scramjet at high Machnumbers.展开更多
The study evaluated the skin anti-aging activity of Astragalus sarcocolla leaves extract(ASE)by assessing its antioxidant and inhibitory effect activity on matrix metalloproteinase(MMP),collagenase,elastase,hyaluronid...The study evaluated the skin anti-aging activity of Astragalus sarcocolla leaves extract(ASE)by assessing its antioxidant and inhibitory effect activity on matrix metalloproteinase(MMP),collagenase,elastase,hyaluronidase,and tyrosinase in relation to its chemical composition.Ultra Performance Liquid Chromatography-Mass Spectrometry(UPLC-MS)identified 27 metabolites(15 flavonoids,8 phenolic acids and their derivatives,and 4 coumarins).ASE showed strong antioxidant capacity in DPPH(IC_(50)value of 26.05μg/mL)and FRAP(2433μM FeSO_(4)/g extract)assays.The extract inhibited MMP-1 and MMP-9 in a concentration-dependent manner and suppressed collagenase,elastase,hyaluronidase,and tyrosinase activities(IC_(50)=35.038,40.748,61.389,and 30.980μg/mL,respectively).A network pharmacology study was conducted to uncover the mechanisms responsible for skin anti-aging effects,and molecular docking further evaluated interactions of key metabolites with hub targets.Twenty-one bioactive metabolites,selected based on oral bioavailability and drug-likeness,highlighted cinnamic acid,acacetin,luteolin,kaempferol,and apigenin as key compounds.MMP-9,ESR1,PTGS-2,and EGFR were identified as main targets.Docking studies revealed that acacetin and apigenin have stronger binding affinities to MMP-9,PTGS-2,and EGFR than other constituents.These findings suggest that ASE may serve as a natural multi-target skin anti-aging remedy with potential cosmetic applications.展开更多
Head-splitting is a prevalent physiological disorder in cabbage that causes substantial economic losses.However,the genetic factors and molecular mechanisms underlying head-splitting resistance remain largely unexplor...Head-splitting is a prevalent physiological disorder in cabbage that causes substantial economic losses.However,the genetic factors and molecular mechanisms underlying head-splitting resistance remain largely unexplored.This study identified a genomic region(q NLQ3.1) for head-splitting resistance on chromosome C03 through the combination of QTLseq and GPS analysis in an F_(2) population derived from hybridizing two cabbage inbred lines,‘Dazhengfu'(ZF,susceptible) and ‘103'(resistant).Traditional genetic linkage analysis narrowed q NLQ3.1 to a 74.6 kb region.Furthermore,comparative analysis of the two parental lines using transcriptomic and metabolic profiling demonstrated the crucial role of hormones in regulating head-splitting resistance.Bol028000,encoding a homologue of Arabidopsis Cytokinin Response Factor 3(CRF3),emerged as a promising candidate for head-splitting resistance and was subsequently validated through Sanger sequencing and quantitative RT-PCR(qRT-PCR).Subcellular localisation analysis revealed that Bol028000 was mainly expressed in the nucleus.Additionally,one kompetitive allele-specific PCR(KASP) marker from Bol028000 was developed and utilized to screen 42 inbred lines.These findings enhance the theoretical understanding of head-splitting resistance and provide valuable insights for the molecular breeding of head-splitting resistant cabbages.展开更多
Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differe...Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differences.However,research examining how these factors co-configure at the individual level remains limited,particularly from a gender-specific perspective.Thus,the present study aims to adopt a person-centered analytic approach to identify gender-specific configurations of environmental vulnerability and individual resilience associated with suicidal ideation among Chinese adolescents.Methods:Data were collected from 2616 Chinese primary and secondary school students(aged 10–17;1223 girls).Participants completed validated scales measuring environmental vulnerability,individual resilience,and suicidal ideation.Latent profile analysis(LPA)was conducted separately by gender.Results:Gender differences were prominent:males exhibited higher resilience and lower suicidal ideation,while females reported higher environmental vulnerability and elevated levels of suicidal ideation.LPA identified three distinct profiles for males:Low Vulnerable–High Protective–Low Risk(LHL),Medium Vulnerable–Low Protective–Low Risk(MLL),and High Vulnerable–Low Protective–High Risk(HLH).Four profiles emerged for females:LHL,MLL,Medium Vulnerable–Low Protective–Medium Risk(MLM),and HLH.Crucially,within the HLH profile,males exhibited particularly deficient humor(η^(2)=0.19)and confidence(η^(2)=0.16),while females formed a distinct subgroup characterized by severe academic and family stressors(η^(2)=0.30–0.36).Conclusion:The study underscores developing gender-specific mental health interventions using a nuanced,person-centered approach that considers both environmental risk and individual resilience factors,which allows for targeted suicide prevention strategies addressing the unique needs of male and female adolescents.展开更多
Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance fo...Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance for mass screening of cancer,so the cost-effective and simple detection methods of sEVpp are urgently demanded.Herein,we constructed a paper-based multichannel sEVpp POCT device(sEVpp-PAD)enabled by functional DNA probes and metal-organic framework(MOF).The core components are aptamer/MOF-modified paper chips.The modified aptamers can immunocapture the sEV expressing corresponding proteins,while the modified MOF can provide abundant sites for aptamer-modification,reduce the nonspecific protein absorption,and act as reference for ratiometric detection.Simply powered by two syringes,the sEVpp-PAD can efficiently capture sEVs expressing corresponding protein from cell culture media and sera.Furthermore,a detection probe(DP)consisted of CD63 aptamer and G-quadruplex was developed for the colorimetric detection of captured sEVs.Utilizing this device,the sEVpp in various hepatocellular carcinoma cell culture medium and,more importantly,in human sera can be accurately determined,only with$2 device,$0.2 detection reagents and 1.8 h procedure.This simple strategy for sEVpp detection can innovatively promote the POCT and subtyping of cancer based on sEV-related liquid biopsy.展开更多
As a key component of injection molding,multi-cavity hot runner(MCHR)system faces the crucial problem of polymer melt filling imbalance among the cavities.The thermal imbalance in the system has been considered as the...As a key component of injection molding,multi-cavity hot runner(MCHR)system faces the crucial problem of polymer melt filling imbalance among the cavities.The thermal imbalance in the system has been considered as the leading cause.Hence,the solution may rest with the synchronization of those heating processes in MCHR system.This paper proposes a’Master-Slave’generalized predictive synchronization control(MS-GPSC)method with’Mr.Slowest’strategy for preheating stage of MCHR system.The core of the proposed method is choosing the heating process with slowest dynamics as the’Master’to track the setpoint,while the other heating processes are treated as‘Slaves’tracking the output of’Master’.This proposed method is shown to have the good ability of temperature synchronization.The corresponding analysis is conducted on parameters tuning and stability,simulations and experiments show the strategy is effective.展开更多
Profiled monolayer cBN wheel was induction brazed for grinding of titanium dovetail slot in this study.Aimed at acquiring a uniform temperature distribution along the profiled surface and reducing the thermal deformat...Profiled monolayer cBN wheel was induction brazed for grinding of titanium dovetail slot in this study.Aimed at acquiring a uniform temperature distribution along the profiled surface and reducing the thermal deformation of the brazed wheel,a finite element model was established to investigate the temperature uniformity during induction brazing.A suitable induction coil and the related working parameters were designed and chosen based on the simulation results.Ag-Cu-Ti alloy and cBN grains were applied in the induction brazing experiment.The results showed geometric deformation of the brazed wheel was no more than 0.01 mm and chemical reaction layer were found on the brazed joint interface.Further validation tests were carried out by grinding of Ti-6 Al-4 V alloy.Compared to the electroplated wheel,the brazed wheel showed better performance such as low specific grinding energy and good ground quality in grinding of Ti-6 Al-4 V alloy.Abrasion wear was found to be the main failure mode for the induction brazed wheel,while adhesion and grains pull-out were the main failure mode for the electroplated wheel.展开更多
In this study, we propose a new temperature compensation control strategy for a multi-cavity hot runner injection molding system, At first, the melt filling time of each cavity can be measured by installing temperatur...In this study, we propose a new temperature compensation control strategy for a multi-cavity hot runner injection molding system, At first, the melt filling time of each cavity can be measured by installing temperature sensors on the position around end filling area, and filling time difference between the various cavities can be calculated. Then the melt temperature of each hot nozzle can be adjusted automatically by a control strategy established based on the Fuzzy Theory and a program compiled with LABVIEW software. Temperature changes the melt mobility, so the adjustment of temperature can equalize the filling time of the melt in each cavity, which can reduced the mass deviation between each cavity and make product properties of each cavity consistent. The conclusion of the experiment is as follows： For this contact lens box of a four-cavity Hot Runner mold, by applying hot runner temperature compensation control system, time difference can be reduced from 0.05 s to 0.01 s at each cavity, and the mass Standard deviation of the four cavity can be improved from 0.006 to 0.002. The ratio of imbalance can be reduced from 20% to 4%. Hence, the hot runner temperature compensation control system has significant feasibility and high potential in improving melt flow balance of multi-cavity molding application.展开更多
The most common and abundant DNA modification is 5-methylcytosine（5mC）,which has been well-established as an epigenetic mark regulating gene expression in eukaryotes（Jones,2012）.Another DNA modification N^6-methyl...The most common and abundant DNA modification is 5-methylcytosine（5mC）,which has been well-established as an epigenetic mark regulating gene expression in eukaryotes（Jones,2012）.Another DNA modification N^6-methyldeoxyadenosine（6mA）,previously reported as a widespread DNA methylation in prokaryotes.展开更多
An an alytical model based on linear decreasi ng leveli ng scheme was proposed to inv estigate the longitu din ally profiled plate leveling process.Considering the variable cross-sectional thickness of longitudinally ...An an alytical model based on linear decreasi ng leveli ng scheme was proposed to inv estigate the longitu din ally profiled plate leveling process.Considering the variable cross-sectional thickness of longitudinally profiled plate and the dynamic reductions in leveling rolls,the reduction models of upper and lower rolls,the leveling force model and the leveling moment model were established,respectively,based on linear decreasing leveling scheme.Moreover,the finite element model of longitudinally profiled plate leveling process was established based on ABAQUS.Then,the total displacements of upper and lower rolls,the leveling force and the stress distribution of longifudinally profiled plate in the leveling process were calculated.To verify the validity of the proposed models,calculated leveling forces were compared with the measured values,and very good agreements are found.Calculated results show that linear decreasing leveling scheme is suitable for leveling longitudinally profiled plate.展开更多
How to utilize existing flow control mechanisms to make profiled end wall design more flexible,efficient,and physical is a meaningful challenge.This study presents a three-dimensional inverse method for profiled end w...How to utilize existing flow control mechanisms to make profiled end wall design more flexible,efficient,and physical is a meaningful challenge.This study presents a three-dimensional inverse method for profiled end wall design to achieve the application of flow control mechanisms.The predetermined pressure distribution on the end wall is reached by modifying the end wall geometry during flow field calculation.A motion velocity model is derived from the normal momentum equation of the moving no-slip boundary to modify the end wall geometry.A Reynolds-Averaged Navier-Stokes(RANS)solver based on the Semi-Implicit Method for Pressure Linked Equations(SIMPLE)algorithm is adopted to simulate the flow field.Based on the mechanism understanding obtained through numerical optimization results,this study adopts the inverse method to redesign an optimized end wall in a compressor cascade.The results indicate that the redesigned end wall exhibits better loss reduction,reducing the overall total pressure loss by 5.5%,whereas the optimized end wall reduces it by 3%.The inverse method allows the imposition of desired influences on the end wall flow without constructing a database,making it highly flexible,efficient,and physical.展开更多
The final quality of complex conical-section rings depends on co-design of multiple processes in forming process chain.In this study,for a complex aeroengine casing ring with a large slope and a flange on its end,a co...The final quality of complex conical-section rings depends on co-design of multiple processes in forming process chain.In this study,for a complex aeroengine casing ring with a large slope and a flange on its end,a co-design method of the forming process chain is put forward towards the objective of precision forming,which not only proposes a standard process route composed of multiple processes of upsetting,punching,rectangular ring rolling,loose tooling forging and profiled ring rolling,but also presents co-design methods of dies and blanks for all the processes.For profiled ring rolling,a design method of preformed blank that makes the blank and the target conical-section ring have the same axial volume distribution is proposed.By the method,the axial metal redistribution during the process can be alleviated greatly thus improving the forming stability and precision of the ring.Based on the geometric features of designed preformed blank,design methods of blanks and dies for loose tolling forging,rectangular ring rolling,punching and upsetting are proposed sequentially.In view of the key roles of loose tooling forging(manufacturing the preformed blank)and profiled ring rolling on the final quality of the conical ring parts,inherited FE simulations for these two processes are performed to verify the proposed design methods and determine appropriate design parameter.It is demonstrated that the proposed design method has significant advantages in improving forming precision.Besides,a suggestive value 1.5 of the rolling ratio for profiled ring rolling(a key design parameter)is given based on comprehensive consideration of multiple indicators such as ring roundness,deformation uniformity and forming load.The corresponding industrial experiments performed illustrate that a high forming precision of the conical-section aeroengine casing ring is achieved.展开更多
Considering the variable cross section thickness of longitudinal profiled plate and the dynamic reductions of straightening rolls,an analytical model combining curvature integral method with linear decreasing straight...Considering the variable cross section thickness of longitudinal profiled plate and the dynamic reductions of straightening rolls,an analytical model combining curvature integral method with linear decreasing straightening scheme was proposed to investigate the longitudinal profiled plate straightening process.Moreover,the calculation flow and solution algorithm of longitudinal profiled plate straightening process were presented.To verify the proposed model,calculated straightening forces were compared with the measured values,and very good agreements were achieved.Then,the reduction,contact angle,reverse bending curvature,residual curvature,straightening force and straightening moment of longitudinal profiled plate in the straightening process were calculated and analyzed,and the calculated results show that the curvature integral method can be used to reveal the mechanism of longitudinal profiled plate straightening.展开更多
A multi-shape representation approach for measuring geometrical properties of profiled fibers was presented.From closed edge chains of a fiber cross section,three evenly spaced vertices were selected to form a triangl...A multi-shape representation approach for measuring geometrical properties of profiled fibers was presented.From closed edge chains of a fiber cross section,three evenly spaced vertices were selected to form a triangle by changing the vertices' spacing,or the step length,the Triangle Area Representation(TAR)was calculated with a special determinant.The bend direction of the two consecutive lines drawn by three vertices determined the sign of the TAR.TARN and TARP were negative and positive extensions of TAR,and used to analyze concave and convex segments on the boundary.The length of TARN measured the size of concaveness.Multi-scale TARPs together with TARN can help to detect fiber conglutinations.展开更多
The protection of the entanglement between two V-atoms(EBTVA)in a multi-cavity coupling system is studied.The whole system consists of two V-atoms.The two V-atoms are initially in the maximum entangled state and inter...The protection of the entanglement between two V-atoms(EBTVA)in a multi-cavity coupling system is studied.The whole system consists of two V-atoms.The two V-atoms are initially in the maximum entangled state and interacts locally with its own dissipative cavity which is coupled to the external cavities with high quality factor(ECWHQF).The results show that,when there is no ECWHQF,the EBTVA can be protected effectively in the case where the V-atom and the dissipative cavity are weak coupled in large detuning,while when there are different numbers n of ECWHQF coupled to two dissipative cavities,by adjusting the parameters of the number n of ECWHQF and the coupling strength k between cavities,the EBTVA can be protected perfectly and continuously.Our result provides an effective method for protecting entanglement resources of three-level system.展开更多
A novel multi-cavity Helmholtz muffler is proposed. The multi-cavity Helmholtz muffler is composed of steel structures and silicone membranes. With suitable construction, the Helmholtz muffler can be designed to exhib...A novel multi-cavity Helmholtz muffler is proposed. The multi-cavity Helmholtz muffler is composed of steel structures and silicone membranes. With suitable construction, the Helmholtz muffler can be designed to exhibit negative mass density in low frequency, and the muffling frequency can be adjusted when we change the internal structure of the cavity,which will be very attractive for noise control. In this paper, we investigate the influence of the membranes and the cavities on noise reduction characteristics with theoretical calculations and simulations. The results show that the numbers of membranes and the volumes of the cavities can have a great effect on the position of the muffling frequency. The number of cavities can have a great effect on the width of the muffling frequency(reduce the noise by 10 dB). With different combinations of the membranes and cavities, we can get different muffling frequencies, which can meet different muffling demands in practical applications and is more flexible than the traditional Helmholtz cavity.展开更多
The key technique of a kinetic energy rod(KER) warhead is to control the flight attitude of rods. The rods are usually designed to different shapes. A new conceptual KER named profiled rod which has large L/D ratio is...The key technique of a kinetic energy rod(KER) warhead is to control the flight attitude of rods. The rods are usually designed to different shapes. A new conceptual KER named profiled rod which has large L/D ratio is described in this paper. The elastic dynamic equations of this profiled rod flying at high velocity after detonation are set up on the basis of Euler-Bernoulli beam, and the aeroelastic deformation of profiled rod is calculated by semi-analytical method for calculating the vibration characteristics of variable cross-section beam. In addition, the aeroelastic deformation of the undeformed profiled rod and the aeroelastic deformation of deformed profiled rod which is caused by the detonation of explosive are simulated by computational fluid dynamic and finite element method(CFD/FEM), respectively. A satisfactory agreement of these two methods is obtained by the comparison of two methods. The results show that the semi-analytical method for calculating the vibration characteristics of variable cross-section beam is applied to analyze the aeroelastic deformation of profiled rod flying at high velocity.展开更多
A new Kinetic Energy Rod( KER) warhead named profiled rod warhead is proposed in this paper.Based on the design of profiled rod warhead,a model of profiled rod driven by detonation is established. The detonation proce...A new Kinetic Energy Rod( KER) warhead named profiled rod warhead is proposed in this paper.Based on the design of profiled rod warhead,a model of profiled rod driven by detonation is established. The detonation process is simulated by ANSYS / LS-DYNA,and the deployment velocity and initial flight attitude of rod are achieved. In addition,static rod deployment testing are performed to investigate the damage effect,the spatial flight attitude and deployment velocity. A satisfactory agreement is obtained by the comparison between numerical results and testing results. Meanwhile,the profiled rod studies are conducted to determine a higher penetrability compared with traditional cylindrical rods. Rigid body dynamics equations of profiled rod,which accounts for the influence of air resistance,are set up to predict the flight trajectory of long-distance. The results show that the profiled rod may provide a better penetration angle which still maintains a significant penetrability against projectiles when the rods move off long-distance range.展开更多
基金supported by the National Key R&D Program of China(No.2021YFB3501102).
文摘Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspheres.And modification of the pore structure is one of the effective strategies.In this study,multi-cavity mesoporous carbon microspheres were successfully synthesized by the synergistic method of soft and hard templates,during which a phenolic resin with superior thermal stability was employed as the carbon precursor and a mixture of silica sol and F108 as the mesoporous template.Carbon microspheres with multi-cavity mesoporous structures were prepared,and all the samples showed highly even mesopores,with diameters around 12 nm.The diameter of these microspheres decreased from 396.8 nm to about 182.5 nm with the increase of silica sol.After CO_(2) activation,these novel carbon microspheres(APCF0.5-S1.75)demonstrated high specific surface area(983.3 m^(2)/g)and remarkable CO_(2) uptake of 4.93 mmol/g at 0℃ and1 bar.This could be attributed to the unique multi-cavity structure,which offers uniform mesoporous pore channels,minimal CO_(2) transport of and a greater number of active sites for CO_(2) adsorption.
基金the National Natural Science Foundation of China(No.52275378)the National Key Laboratory for Precision Hot Processing of Metals(6142909200208)。
文摘The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.
基金financially supported by the National Key Laboratory of Ramjet,China(No.2022-020-003)the Fundamental Research Funds for the Central Universities,China(No.501QYZX2023146001)。
文摘The kerosene-fueled Scramjet with multi-cavity combustor has the potential to serve aspropulsion system for hypersonic flight.However,the impact of injection positions on combustionperformance and mechanism at high Mach numbers remains uncertain.Therefore,a comparativestudy was conducted using numerical methods to explore multi-cavity Scramjet combustor perfor-mance at a flight Mach number 7.0 with different injection positions.The combustor is equippedwith 6 cavities arranged in three groups along the flow direction,each consisting of two cavities per-pendicular to the flow.It is shown that the injection location significantly influences combustionperformance:Front-injection yields higher combustion efficiency than post-injection,but post-injection is advantageous for the intake start.Additionally,regardless of injection positions,themainstream flow state near the cavities behind the injection can be categorized as supersonic flow,supersonic-subsonic coexistence flow,and subsonic flow.The optimal length from the downstreamto the trailing edge of the cavities behind the injection for achieving maximum combustion effi-ciency is determined.Further extension beyond this optimal length does not significantly increasethe combustion efficiency.In addition,the optimal length varies with different injection positions-specifically,it is about 60%longer with post-injection conditions than with front-injection con-ditions in this investigation.Moreover,significant secondary combustion within the cavities leadingto improved efficiency only occurs when mainstream flow state is either supersonic flow orsupersonic-subsonic coexistence flow.Also,with a well-optimized design,the kerosene-fueledmulti-cavity Scramjet can achieve enhanced combustion efficiency,which shows relatively smallvariation across a wide range of equivalence ratios.This might be caused by the effects of interac-tion among these multiple cavities.Therefore,these research findings can provide valuable insightsfor designing and optimizing the kerosene-fueled multi-cavity combustor in Scramjet at high Machnumbers.
基金funded by the Deanship of Graduate Studies and Scientific Research at Jouf University under grant No.(DGSSR-2023-01-02126).
文摘The study evaluated the skin anti-aging activity of Astragalus sarcocolla leaves extract(ASE)by assessing its antioxidant and inhibitory effect activity on matrix metalloproteinase(MMP),collagenase,elastase,hyaluronidase,and tyrosinase in relation to its chemical composition.Ultra Performance Liquid Chromatography-Mass Spectrometry(UPLC-MS)identified 27 metabolites(15 flavonoids,8 phenolic acids and their derivatives,and 4 coumarins).ASE showed strong antioxidant capacity in DPPH(IC_(50)value of 26.05μg/mL)and FRAP(2433μM FeSO_(4)/g extract)assays.The extract inhibited MMP-1 and MMP-9 in a concentration-dependent manner and suppressed collagenase,elastase,hyaluronidase,and tyrosinase activities(IC_(50)=35.038,40.748,61.389,and 30.980μg/mL,respectively).A network pharmacology study was conducted to uncover the mechanisms responsible for skin anti-aging effects,and molecular docking further evaluated interactions of key metabolites with hub targets.Twenty-one bioactive metabolites,selected based on oral bioavailability and drug-likeness,highlighted cinnamic acid,acacetin,luteolin,kaempferol,and apigenin as key compounds.MMP-9,ESR1,PTGS-2,and EGFR were identified as main targets.Docking studies revealed that acacetin and apigenin have stronger binding affinities to MMP-9,PTGS-2,and EGFR than other constituents.These findings suggest that ASE may serve as a natural multi-target skin anti-aging remedy with potential cosmetic applications.
基金funded by the Agricultural Development Program through Science and Technology of Shanghai,China (2022-02-08-00-12-F01099)the National Key R&D Program of China (2023YFD1201501)+1 种基金the Science and Technology Commission of Shanghai Municipality,China (22DX1900100)the Excellent Team Project of Shanghai Academy of Agricultural Sciences,China (2022(007))。
文摘Head-splitting is a prevalent physiological disorder in cabbage that causes substantial economic losses.However,the genetic factors and molecular mechanisms underlying head-splitting resistance remain largely unexplored.This study identified a genomic region(q NLQ3.1) for head-splitting resistance on chromosome C03 through the combination of QTLseq and GPS analysis in an F_(2) population derived from hybridizing two cabbage inbred lines,‘Dazhengfu'(ZF,susceptible) and ‘103'(resistant).Traditional genetic linkage analysis narrowed q NLQ3.1 to a 74.6 kb region.Furthermore,comparative analysis of the two parental lines using transcriptomic and metabolic profiling demonstrated the crucial role of hormones in regulating head-splitting resistance.Bol028000,encoding a homologue of Arabidopsis Cytokinin Response Factor 3(CRF3),emerged as a promising candidate for head-splitting resistance and was subsequently validated through Sanger sequencing and quantitative RT-PCR(qRT-PCR).Subcellular localisation analysis revealed that Bol028000 was mainly expressed in the nucleus.Additionally,one kompetitive allele-specific PCR(KASP) marker from Bol028000 was developed and utilized to screen 42 inbred lines.These findings enhance the theoretical understanding of head-splitting resistance and provide valuable insights for the molecular breeding of head-splitting resistant cabbages.
基金supported by the Major Planning Project of Philosophy and Social Science of Guangdong Province(GD23ZD17)the Humanities and Social Sciences Program of the Ministry of Education(23YJA190006)+3 种基金the Ministry of Education(MOE)Major Project of Philosophy and Social Sciences Research(2025JZDZ024)the MOE Project of the Key Research Institute of Humanities and Social Sciences in Universities(22JJD190008)a grant from the Research Center for Brain Cognition and Human Development of Guangdong(2024B0303390003)the Psychological Services and Counseling Base for the Happy Guangzhou Project.
文摘Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differences.However,research examining how these factors co-configure at the individual level remains limited,particularly from a gender-specific perspective.Thus,the present study aims to adopt a person-centered analytic approach to identify gender-specific configurations of environmental vulnerability and individual resilience associated with suicidal ideation among Chinese adolescents.Methods:Data were collected from 2616 Chinese primary and secondary school students(aged 10–17;1223 girls).Participants completed validated scales measuring environmental vulnerability,individual resilience,and suicidal ideation.Latent profile analysis(LPA)was conducted separately by gender.Results:Gender differences were prominent:males exhibited higher resilience and lower suicidal ideation,while females reported higher environmental vulnerability and elevated levels of suicidal ideation.LPA identified three distinct profiles for males:Low Vulnerable–High Protective–Low Risk(LHL),Medium Vulnerable–Low Protective–Low Risk(MLL),and High Vulnerable–Low Protective–High Risk(HLH).Four profiles emerged for females:LHL,MLL,Medium Vulnerable–Low Protective–Medium Risk(MLM),and HLH.Crucially,within the HLH profile,males exhibited particularly deficient humor(η^(2)=0.19)and confidence(η^(2)=0.16),while females formed a distinct subgroup characterized by severe academic and family stressors(η^(2)=0.30–0.36).Conclusion:The study underscores developing gender-specific mental health interventions using a nuanced,person-centered approach that considers both environmental risk and individual resilience factors,which allows for targeted suicide prevention strategies addressing the unique needs of male and female adolescents.
基金supported by the National Key Research and Development Program of China(No.2022YFE0201800)the National Natural Science Foundation of China(Nos.22274169 and 22474161)+5 种基金Guangdong Basic and Applied Basic Research Foundation(No.2024A1515030160)the Science and Technology Program of Guangzhou City(No.2023B03J1380)Shenzhen Science and Technology Innovation Commission(No.GJHZ20210705142200001)the Scientific Technology Project of Guangzhou City(No.202103000003)the Guangdong Science and Technology Plan Project(No.2020B1212060077)the Open Research Fund of State Key Laboratory of Analytical Chemistry for Life Science,School of Chemistry and Chemical Engineering,Nanjing University.
文摘Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance for mass screening of cancer,so the cost-effective and simple detection methods of sEVpp are urgently demanded.Herein,we constructed a paper-based multichannel sEVpp POCT device(sEVpp-PAD)enabled by functional DNA probes and metal-organic framework(MOF).The core components are aptamer/MOF-modified paper chips.The modified aptamers can immunocapture the sEV expressing corresponding proteins,while the modified MOF can provide abundant sites for aptamer-modification,reduce the nonspecific protein absorption,and act as reference for ratiometric detection.Simply powered by two syringes,the sEVpp-PAD can efficiently capture sEVs expressing corresponding protein from cell culture media and sera.Furthermore,a detection probe(DP)consisted of CD63 aptamer and G-quadruplex was developed for the colorimetric detection of captured sEVs.Utilizing this device,the sEVpp in various hepatocellular carcinoma cell culture medium and,more importantly,in human sera can be accurately determined,only with$2 device,$0.2 detection reagents and 1.8 h procedure.This simple strategy for sEVpp detection can innovatively promote the POCT and subtyping of cancer based on sEV-related liquid biopsy.
基金supported in part by National Natural Science Foundation of China(62203127)Basic and Applied Basic Research Project of Guangzhou City(2023A04J1712)+1 种基金The Foshan-HKUST Projects Program(FSUST19-FYTRI01)GDAS’Project of Science and Technology Development(2020GDASYL-20200202001).
文摘As a key component of injection molding,multi-cavity hot runner(MCHR)system faces the crucial problem of polymer melt filling imbalance among the cavities.The thermal imbalance in the system has been considered as the leading cause.Hence,the solution may rest with the synchronization of those heating processes in MCHR system.This paper proposes a’Master-Slave’generalized predictive synchronization control(MS-GPSC)method with’Mr.Slowest’strategy for preheating stage of MCHR system.The core of the proposed method is choosing the heating process with slowest dynamics as the’Master’to track the setpoint,while the other heating processes are treated as‘Slaves’tracking the output of’Master’.This proposed method is shown to have the good ability of temperature synchronization.The corresponding analysis is conducted on parameters tuning and stability,simulations and experiments show the strategy is effective.
基金the National Natural Science Foundation of China(Nos.51905234,51805231,51975264,51905275,51705463)。
文摘Profiled monolayer cBN wheel was induction brazed for grinding of titanium dovetail slot in this study.Aimed at acquiring a uniform temperature distribution along the profiled surface and reducing the thermal deformation of the brazed wheel,a finite element model was established to investigate the temperature uniformity during induction brazing.A suitable induction coil and the related working parameters were designed and chosen based on the simulation results.Ag-Cu-Ti alloy and cBN grains were applied in the induction brazing experiment.The results showed geometric deformation of the brazed wheel was no more than 0.01 mm and chemical reaction layer were found on the brazed joint interface.Further validation tests were carried out by grinding of Ti-6 Al-4 V alloy.Compared to the electroplated wheel,the brazed wheel showed better performance such as low specific grinding energy and good ground quality in grinding of Ti-6 Al-4 V alloy.Abrasion wear was found to be the main failure mode for the induction brazed wheel,while adhesion and grains pull-out were the main failure mode for the electroplated wheel.
文摘In this study, we propose a new temperature compensation control strategy for a multi-cavity hot runner injection molding system, At first, the melt filling time of each cavity can be measured by installing temperature sensors on the position around end filling area, and filling time difference between the various cavities can be calculated. Then the melt temperature of each hot nozzle can be adjusted automatically by a control strategy established based on the Fuzzy Theory and a program compiled with LABVIEW software. Temperature changes the melt mobility, so the adjustment of temperature can equalize the filling time of the melt in each cavity, which can reduced the mass deviation between each cavity and make product properties of each cavity consistent. The conclusion of the experiment is as follows： For this contact lens box of a four-cavity Hot Runner mold, by applying hot runner temperature compensation control system, time difference can be reduced from 0.05 s to 0.01 s at each cavity, and the mass Standard deviation of the four cavity can be improved from 0.006 to 0.002. The ratio of imbalance can be reduced from 20% to 4%. Hence, the hot runner temperature compensation control system has significant feasibility and high potential in improving melt flow balance of multi-cavity molding application.
基金supported by Recruitment program of Global Youth Expert of China (to X.G.)the Elite Youth Program of the Chinese Academy of Agricultural Science (to X.G.)the intramural research support from Biotechnology Research Institute, Chinese Academy of Agricultural Sciences
文摘The most common and abundant DNA modification is 5-methylcytosine（5mC）,which has been well-established as an epigenetic mark regulating gene expression in eukaryotes（Jones,2012）.Another DNA modification N^6-methyldeoxyadenosine（6mA）,previously reported as a widespread DNA methylation in prokaryotes.
基金Key R&D Program of China(No.20I7YFB0306404)Natural Science Foundation of Hebei Province(No.E2016203179)Postdoctoral Science Foundation of China(No.2016M590211).
文摘An an alytical model based on linear decreasi ng leveli ng scheme was proposed to inv estigate the longitu din ally profiled plate leveling process.Considering the variable cross-sectional thickness of longitudinally profiled plate and the dynamic reductions in leveling rolls,the reduction models of upper and lower rolls,the leveling force model and the leveling moment model were established,respectively,based on linear decreasing leveling scheme.Moreover,the finite element model of longitudinally profiled plate leveling process was established based on ABAQUS.Then,the total displacements of upper and lower rolls,the leveling force and the stress distribution of longifudinally profiled plate in the leveling process were calculated.To verify the validity of the proposed models,calculated leveling forces were compared with the measured values,and very good agreements are found.Calculated results show that linear decreasing leveling scheme is suitable for leveling longitudinally profiled plate.
基金Supported by the National Natural Science Foundation of China(No.52376021).
文摘How to utilize existing flow control mechanisms to make profiled end wall design more flexible,efficient,and physical is a meaningful challenge.This study presents a three-dimensional inverse method for profiled end wall design to achieve the application of flow control mechanisms.The predetermined pressure distribution on the end wall is reached by modifying the end wall geometry during flow field calculation.A motion velocity model is derived from the normal momentum equation of the moving no-slip boundary to modify the end wall geometry.A Reynolds-Averaged Navier-Stokes(RANS)solver based on the Semi-Implicit Method for Pressure Linked Equations(SIMPLE)algorithm is adopted to simulate the flow field.Based on the mechanism understanding obtained through numerical optimization results,this study adopts the inverse method to redesign an optimized end wall in a compressor cascade.The results indicate that the redesigned end wall exhibits better loss reduction,reducing the overall total pressure loss by 5.5%,whereas the optimized end wall reduces it by 3%.The inverse method allows the imposition of desired influences on the end wall flow without constructing a database,making it highly flexible,efficient,and physical.
基金the National Natural Science Foundation of China(52275378).
文摘The final quality of complex conical-section rings depends on co-design of multiple processes in forming process chain.In this study,for a complex aeroengine casing ring with a large slope and a flange on its end,a co-design method of the forming process chain is put forward towards the objective of precision forming,which not only proposes a standard process route composed of multiple processes of upsetting,punching,rectangular ring rolling,loose tooling forging and profiled ring rolling,but also presents co-design methods of dies and blanks for all the processes.For profiled ring rolling,a design method of preformed blank that makes the blank and the target conical-section ring have the same axial volume distribution is proposed.By the method,the axial metal redistribution during the process can be alleviated greatly thus improving the forming stability and precision of the ring.Based on the geometric features of designed preformed blank,design methods of blanks and dies for loose tolling forging,rectangular ring rolling,punching and upsetting are proposed sequentially.In view of the key roles of loose tooling forging(manufacturing the preformed blank)and profiled ring rolling on the final quality of the conical ring parts,inherited FE simulations for these two processes are performed to verify the proposed design methods and determine appropriate design parameter.It is demonstrated that the proposed design method has significant advantages in improving forming precision.Besides,a suggestive value 1.5 of the rolling ratio for profiled ring rolling(a key design parameter)is given based on comprehensive consideration of multiple indicators such as ring roundness,deformation uniformity and forming load.The corresponding industrial experiments performed illustrate that a high forming precision of the conical-section aeroengine casing ring is achieved.
基金The authors are grateful for the supports of the National Key Research and Development Program of China(No.2017YFB0306404)Key Project of Hebei Education Department(No.ZD2018203).
文摘Considering the variable cross section thickness of longitudinal profiled plate and the dynamic reductions of straightening rolls,an analytical model combining curvature integral method with linear decreasing straightening scheme was proposed to investigate the longitudinal profiled plate straightening process.Moreover,the calculation flow and solution algorithm of longitudinal profiled plate straightening process were presented.To verify the proposed model,calculated straightening forces were compared with the measured values,and very good agreements were achieved.Then,the reduction,contact angle,reverse bending curvature,residual curvature,straightening force and straightening moment of longitudinal profiled plate in the straightening process were calculated and analyzed,and the calculated results show that the curvature integral method can be used to reveal the mechanism of longitudinal profiled plate straightening.
基金Foundation for the Author of National Excellent Doctoral Dissertation of P.R.China(No.200350)
文摘A multi-shape representation approach for measuring geometrical properties of profiled fibers was presented.From closed edge chains of a fiber cross section,three evenly spaced vertices were selected to form a triangle by changing the vertices' spacing,or the step length,the Triangle Area Representation(TAR)was calculated with a special determinant.The bend direction of the two consecutive lines drawn by three vertices determined the sign of the TAR.TARN and TARP were negative and positive extensions of TAR,and used to analyze concave and convex segments on the boundary.The length of TARN measured the size of concaveness.Multi-scale TARPs together with TARN can help to detect fiber conglutinations.
基金the National Natural Science Foundation of China(Grant Nos.12064012 and 11374096).
文摘The protection of the entanglement between two V-atoms(EBTVA)in a multi-cavity coupling system is studied.The whole system consists of two V-atoms.The two V-atoms are initially in the maximum entangled state and interacts locally with its own dissipative cavity which is coupled to the external cavities with high quality factor(ECWHQF).The results show that,when there is no ECWHQF,the EBTVA can be protected effectively in the case where the V-atom and the dissipative cavity are weak coupled in large detuning,while when there are different numbers n of ECWHQF coupled to two dissipative cavities,by adjusting the parameters of the number n of ECWHQF and the coupling strength k between cavities,the EBTVA can be protected perfectly and continuously.Our result provides an effective method for protecting entanglement resources of three-level system.
基金Project supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(Grant No.KYCX18 0249)
文摘A novel multi-cavity Helmholtz muffler is proposed. The multi-cavity Helmholtz muffler is composed of steel structures and silicone membranes. With suitable construction, the Helmholtz muffler can be designed to exhibit negative mass density in low frequency, and the muffling frequency can be adjusted when we change the internal structure of the cavity,which will be very attractive for noise control. In this paper, we investigate the influence of the membranes and the cavities on noise reduction characteristics with theoretical calculations and simulations. The results show that the numbers of membranes and the volumes of the cavities can have a great effect on the position of the muffling frequency. The number of cavities can have a great effect on the width of the muffling frequency(reduce the noise by 10 dB). With different combinations of the membranes and cavities, we can get different muffling frequencies, which can meet different muffling demands in practical applications and is more flexible than the traditional Helmholtz cavity.
文摘The key technique of a kinetic energy rod(KER) warhead is to control the flight attitude of rods. The rods are usually designed to different shapes. A new conceptual KER named profiled rod which has large L/D ratio is described in this paper. The elastic dynamic equations of this profiled rod flying at high velocity after detonation are set up on the basis of Euler-Bernoulli beam, and the aeroelastic deformation of profiled rod is calculated by semi-analytical method for calculating the vibration characteristics of variable cross-section beam. In addition, the aeroelastic deformation of the undeformed profiled rod and the aeroelastic deformation of deformed profiled rod which is caused by the detonation of explosive are simulated by computational fluid dynamic and finite element method(CFD/FEM), respectively. A satisfactory agreement of these two methods is obtained by the comparison of two methods. The results show that the semi-analytical method for calculating the vibration characteristics of variable cross-section beam is applied to analyze the aeroelastic deformation of profiled rod flying at high velocity.
基金Sponsored by the CALT University Joint Fund(Grant No.CALT201105)
文摘A new Kinetic Energy Rod( KER) warhead named profiled rod warhead is proposed in this paper.Based on the design of profiled rod warhead,a model of profiled rod driven by detonation is established. The detonation process is simulated by ANSYS / LS-DYNA,and the deployment velocity and initial flight attitude of rod are achieved. In addition,static rod deployment testing are performed to investigate the damage effect,the spatial flight attitude and deployment velocity. A satisfactory agreement is obtained by the comparison between numerical results and testing results. Meanwhile,the profiled rod studies are conducted to determine a higher penetrability compared with traditional cylindrical rods. Rigid body dynamics equations of profiled rod,which accounts for the influence of air resistance,are set up to predict the flight trajectory of long-distance. The results show that the profiled rod may provide a better penetration angle which still maintains a significant penetrability against projectiles when the rods move off long-distance range.
