Multi-body dynamics,relative coordinates and graph theory are combined to analyze the structure of a vehicle suspension.The dynamic equations of the left front suspension system are derived for modeling.First,The pure...Multi-body dynamics,relative coordinates and graph theory are combined to analyze the structure of a vehicle suspension.The dynamic equations of the left front suspension system are derived for modeling.First,The pure tire theory model is used as the input criteria of the suspension multibody system dynamic model in order to simulate the suspension K&C characteristics test.Then,it is important to verify the accuracy of this model by comparing and analyzing the experimental data and simulation results.The results show that the model has high precision and can predict the performance of the vehicle.It also provides a new solution for the vehicle dynamic modeling.展开更多
Based on the principle of vehicle-track coupling dynamics, SIMPACK multi-body dynamics software is used to establish a C80 wagon line-coupled multi-body dynamics model with 73 degrees of freedom. And the reasonablenes...Based on the principle of vehicle-track coupling dynamics, SIMPACK multi-body dynamics software is used to establish a C80 wagon line-coupled multi-body dynamics model with 73 degrees of freedom. And the reasonableness of the line-coupled dynamics model is verified by using the maximum residual acceleration, the nonlinear critical speed of the wagon. The experimental results show that the established vehicle line coupling dynamics model meets the requirements of vehicle line coupling dynamics modeling.展开更多
To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework ba...To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.展开更多
Data-driven reduced-order modeling opens new avenues of understanding,predicting,controlling,and optimizing system behavior.Simple systems may have state spaces in which sparse human-interpretable dynamical systems ca...Data-driven reduced-order modeling opens new avenues of understanding,predicting,controlling,and optimizing system behavior.Simple systems may have state spaces in which sparse human-interpretable dynamical systems can be identified.This approach has been pioneered by Brunton et al.(2016,PNAS)with sparse identification of nonlinear dynamics.Complex systems,however,cannot be expected to benefit from such simple analytical descriptions.Yet,smoothness may be exploited by analytical local descriptions.In this paper,we identify a clusterwise polynomial dynamics from time-resolved snapshot data.The full state space is partitioned into clusters with a reduced-order polynomial description for each cluster and a global patching strategy.The resulting clusterwise modeling is entirely data-driven and requires no prior knowledge of the system dynamics.We illustrate the approach on the well-known chaotic Lorenz and Rössler systems,on the more challenging chaotic fluid flow dynamics of higher state-space dimensions,on a noisy electrocardiogram signal,and finally on the time evolution of the monthly sunspot number.Clusterwise modeling offers a powerful and interpretable paradigm for dynamical modeling.Nonlinear dynamics can be approximated by assembling many simple local models of different resolutions,opening new paths to understand and control intricate nonlinearities.展开更多
In recent years,there has been a surge of interest in air-ground collaborative robotics technologies.Our research group designs a novel combination-separation air-ground robot(CSAGR),which exhibits rapid automatic com...In recent years,there has been a surge of interest in air-ground collaborative robotics technologies.Our research group designs a novel combination-separation air-ground robot(CSAGR),which exhibits rapid automatic combination and separation capabilities.During the combination process,contact effects between robots,as well as between robots and the environment,are unavoidable.Therefore,it is essential to conduct detailed and accurate modeling and analysis of the collision impact intensity and transmission pathways within the robotic system to ensure the successful execution of the combination procedure.This paper addresses the intricate surface geometries and multi-point contact challenges present in the contact regions of dual robots by making appropriate modifications to the traditional continuous contact force model and applying equivalent processing techniques.The validity of the developed model is confirmed through comparisons with results obtained from finite element analysis(FEA),which demonstrates its high fidelity.Additionally,the impact of this model on control performance is analyzed within the flight control system,thereby further ensuring the successful completion of the combination process.This research represents a pioneering application and validation of continuous contact theory in the dynamics of collisions within dual robot systems.展开更多
The pH-sensitive hydrogels play a crucial role in applications such as soft robotics,drug delivery,and biomedical sensors,as they require precise control of swelling behaviors and stress distributions.Traditional expe...The pH-sensitive hydrogels play a crucial role in applications such as soft robotics,drug delivery,and biomedical sensors,as they require precise control of swelling behaviors and stress distributions.Traditional experimental methods struggle to capture stress distributions due to technical limitations,while numerical approaches are often computationally intensive.This study presents a hybrid framework combining analytical modeling and machine learning(ML)to overcome these challenges.An analytical model is used to simulate transient swelling behaviors and stress distributions,and is confirmed to be viable through the comparison of the obtained simulation results with the existing experimental swelling data.The predictions from this model are used to train neural networks,including a two-step augmented architecture.The initial neural network predicts hydration values,which are then fed into a second network to predict stress distributions,effectively capturing nonlinear interdependencies.This approach achieves mean absolute errors(MAEs)as low as 0.031,with average errors of 1.9%for the radial stress and 2.55%for the hoop stress.This framework significantly enhances the predictive accuracy and reduces the computational complexity,offering actionable insights for optimizing hydrogel-based systems.展开更多
With the benefits of small turning radius and high trafficability, the articulated steering half-track tractor had been widely utilized in orchard and small spaced farmland. To study the dynamic performance of the art...With the benefits of small turning radius and high trafficability, the articulated steering half-track tractor had been widely utilized in orchard and small spaced farmland. To study the dynamic performance of the articulated steering half-track tractor and provide a model basis for studying the path tracking control, an accurate multi-body dynamic model of the tractor was required. In this study, the crucial parameters in the dynamic model construction of the tractor were investigated. Firstly, the topology model of the components of the half-track tractor was built by RecurDyn, in which the movement subs and driver functions were given. Secondly, considering the difference of dynamic characteristic of the articulated steering tractor with respect to different pavement hardnesses, the soft and hard pavement models were constructed by employing the harmonic superposition method. Finally, the simulations of the half-track tractor under straight-line and swerve had been conducted on the two types of pavements, and the simulation results were compared with the experimental and theoretical results. The results indicated that the average speed error of the dynamic model on hard pavement and farmland soft pavement were 2.7% and 2.1% compared with the real tractor tests. At the same time, the straight-line driving offset errors of the dynamic model on the two pavements were 1.6% and 3.8% for the front wheels and the rear wheels offset errors were 3.9% and 2.4%, respectively. Furthermore, the turning radius error under front wheel steering was 8.2% and the error under articulated steering was 5.3%. It is proved that the established dynamic model had high accuracy, which provides an efficient approach to analyze the dynamic features of the half-track tractor.展开更多
In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting sy...In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting system is established. Under the four-grade and six-grade oceanic condition, dynamic responses of lifting system are simulated and experiment verified. The simulation results are consistent with experimental ones. The maximum moment of flexion is 322 kN-m on the first pipe under six-grade sea condition. It is seen that the articulated connection can reduce the moment of flexion. The bending deformation of pipe center is researched, and the maximum is 0. 000479 m on the first pipe. Deformation has a little effect on the motion of system. It is feasible to analyze articulated lifting system by applying the theory of flexible multi-body dynamics. The articulated lifting system is obviously better than the fixed one.展开更多
Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evo...Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.展开更多
This paper addresses urban sustainability challenges amid global urbanization, emphasizing the need for innova tive approaches aligned with the Sustainable Development Goals. While traditional tools and linear models ...This paper addresses urban sustainability challenges amid global urbanization, emphasizing the need for innova tive approaches aligned with the Sustainable Development Goals. While traditional tools and linear models offer insights, they fall short in presenting a holistic view of complex urban challenges. System dynamics (SD) models that are often utilized to provide holistic, systematic understanding of a research subject, like the urban system, emerge as valuable tools, but data scarcity and theoretical inadequacy pose challenges. The research reviews relevant papers on recent SD model applications in urban sustainability since 2018, categorizing them based on nine key indicators. Among the reviewed papers, data limitations and model assumptions were identified as ma jor challenges in applying SD models to urban sustainability. This led to exploring the transformative potential of big data analytics, a rare approach in this field as identified by this study, to enhance SD models’ empirical foundation. Integrating big data could provide data-driven calibration, potentially improving predictive accuracy and reducing reliance on simplified assumptions. The paper concludes by advocating for new approaches that reduce assumptions and promote real-time applicable models, contributing to a comprehensive understanding of urban sustainability through the synergy of big data and SD models.展开更多
The nonlinear aircraft model with heavy cargo moving inside is derived by using the sep- aration body method, which can describe the influence of the moving cargo on the aircraft attitude and altitude accurately. Furt...The nonlinear aircraft model with heavy cargo moving inside is derived by using the sep- aration body method, which can describe the influence of the moving cargo on the aircraft attitude and altitude accurately. Furthermore, the nonlinear system is decoupled and linearized through the input^utput feedback linearization method. On this basis, an iterative quasi-sliding mode （SM） flight controller for speed and pitch angle control is proposed. At the first-level SM, a global dynamic switching function is introduced thus eliminating the reaching phase of the sliding motion. At the second-level SM, a nonlinear function with the property of ＂smaUer errors correspond to bigger gains and bigger errors correspond to saturated gains＂ is designed to form an integral sliding manifold, and the overcompensation of the integral term to big errors is weakened. Lyapunov- based analysis shows that the controller with strong robustness can reject both constant and time-varying model uncertainties. The performance of the proposed control strategy is verified in a maximum load airdrop mission.展开更多
The analysis of the passive rotation feature of a micro Flapping Rotary Wing（FRW）applicable for Micro Air Vehicle（MAV） design is presented in this paper. The dynamics of the wing and its influence on aerodynamic p...The analysis of the passive rotation feature of a micro Flapping Rotary Wing（FRW）applicable for Micro Air Vehicle（MAV） design is presented in this paper. The dynamics of the wing and its influence on aerodynamic performance of FRW is studied at low Reynolds number（~10~3）.The FRW is modeled as a simplified system of three rigid bodies： a rotary base with two flapping wings. The multibody dynamic theory is employed to derive the motion equations for FRW. A quasi-steady aerodynamic model is utilized for the calculation of the aerodynamic forces and moments. The dynamic motion process and the effects of the kinematics of wings on the dynamic rotational equilibrium of FWR and the aerodynamic performances are studied. The results show that the passive rotation motion of the wings is a continuous dynamic process which converges into an equilibrium rotary velocity due to the interaction between aerodynamic thrust, drag force and wing inertia. This causes a unique dynamic time-lag phenomena of lift generation for FRW, unlike the normal flapping wing flight vehicle driven by its own motor to actively rotate its wings. The analysis also shows that in order to acquire a high positive lift generation with high power efficiency and small dynamic time-lag, a relative high mid-up stroke angle within 7–15° and low mid-down stroke angle within -40° to -35° are necessary. The results provide a quantified guidance for design option of FRW together with the optimal kinematics of motion according to flight performance requirement.展开更多
This paper presents a dynamic modeling method to test and examine the minimum mass of pressurized pore-gas for triggering landslides in stable gentle soil slopes.A stable gentle soil slope model is constructed with a ...This paper presents a dynamic modeling method to test and examine the minimum mass of pressurized pore-gas for triggering landslides in stable gentle soil slopes.A stable gentle soil slope model is constructed with a dry cement powder core,a saturated clay middle layer,and a dry sand upper layer.The test injects H_(2)O_(2)solution into the cement core to produce new pore-gas.The model test includes three identical H_(2)O_(2)injections.The small mass of generated oxygen gas(0.07%of slope soil mass and landslide body)from the first injection can build sufficient pore-gas pressure to cause soil upheaval and slide.Meanwhile,despite the first injection causing leak paths in the clay layer,the generated small mass of gas from the second and third injections can further trigger the landslide.A dynamic theoretical analysis of the slope failure is carried out and the required minimum pore-gas pressure for the landslide is calculated.The mass and pressure of generated gas in the model test are also estimated based on the calibration test for oxygen generation from H_(2)O_(2)solution in cement powder.The results indicate that the minimum mass of the generated gas for triggering the landslide is 2 ppm to 0.07%of the landslide body.Furthermore,the small mass of gas can provide sufficient pressure to cause soil upheaval and soil sliding in dynamic analysis.展开更多
This article investigates the dynamic characteristics of deflectable nose missiles with rotary single-channel control. After introduction of effective attack and sideslip angles as well as quasi-body coordinates based...This article investigates the dynamic characteristics of deflectable nose missiles with rotary single-channel control. After introduction of effective attack and sideslip angles as well as quasi-body coordinates based on the spin characteristics of the missile＇s body, an integrated rigid kinetic model of missile with deflectable nose control is set up in the quasi-body coordinates considering the interaction between the missile＇s nose and body by using rootless multi-rigid-body system dynamics and is linearized. Then an analysis with simulation is conducted to investigate the coupling characteristics between the channels, the influences of nose deflection on the body and the dynamic characteristics of missile＇s body. The results indicate that various channels of missiles with deflectable nose control are coupled cross-linked; the nose deflection tends to make the body move in the opposite direction and, finally, evidences the correctness and reasonability of the kinetic model proposed by this article.展开更多
Efficiency and safety are paramount concerns for commuters, operators, and designers in subway stations. This study conducted controlled experiments and developed a modified force-based model to investigate the dynami...Efficiency and safety are paramount concerns for commuters, operators, and designers in subway stations. This study conducted controlled experiments and developed a modified force-based model to investigate the dynamics of pedestrian counterflow at bottlenecks, utilizing subway passenger alighting and boarding as a case study. Specifically, the efficiency and safety of three distinct movement modes: the cooperative mode(Coop), the combination of cooperative and competitive mode(C & C), and the competitive mode(Comp), were examined and compared. The experimental findings revealed that the C & C mode exhibited a clear lane formation phenomenon and demonstrated a higher flow rate than the Comp and Coop modes. This observation suggests that a combination of cooperative and competitive behaviors among pedestrians can positively enhance traffic efficiency and safety during the alighting and boarding process. In contrast, pedestrians exhibited increased detouring in their paths and more fluctuating trajectories in the Comp mode. Additionally, a questionnaire survey assessing the level of competition and cooperation among pedestrians provided a comprehensive analysis of the psychological dynamics of passengers during the alighting and boarding activities. Lastly, the proposed force-based model was calibrated and validated, demonstrating a good performance in accurately replicating the overall characteristics of the experimental process. Overall, this study offers valuable insights into enhancing the pedestrian traffic efficiency and safety within subway systems.展开更多
Configuring computational fluid dynamics(CFD)simulations typically demands extensive domain expertise,limiting broader access.Although large language models(LLMs)have advanced scientific computing,their use in automat...Configuring computational fluid dynamics(CFD)simulations typically demands extensive domain expertise,limiting broader access.Although large language models(LLMs)have advanced scientific computing,their use in automating CFD workflows is underdeveloped.We introduce a novel approach centered on domain-specific LLM adaptation.By fine-tuning Qwen2.5-7B-Instruct on NL2FOAM,our custom dataset of 28,716 natural language-to-OpenFOAM configuration pairs with chain-of-thought(CoT)annotations enables direct translation from natural language descriptions to executable CFD setups.A multi-agent system orchestrates the process,autonomously verifying inputs,generating configurations,running simulations,and correcting errors.Evaluation on a benchmark of 21 diverse flow cases demonstrates state-of-the-art performance,achieving 88.7%solution accuracy and 82.6%first-attempt success rate.This significantly outperforms larger general-purpose models such as Qwen2.5-72B-Instruct,DeepSeek-R1,and Llama3.3-70B-Instruct,while also requiring fewer correction iterations and maintaining high computational efficiency.The results highlight the critical role of domain-specific adaptation in deploying LLM assistants for complex engineering workflows.Our code and fine-tuned model have been deposited at https://github.com/YYgroup/AutoCFD.展开更多
As a common fault of the aero-engine,the blade-casing rubbing(BCR)has the potential to cause catastrophic accidents.In this paper,to investigate the dynamic responses and wear characteristics of the system,the laminat...As a common fault of the aero-engine,the blade-casing rubbing(BCR)has the potential to cause catastrophic accidents.In this paper,to investigate the dynamic responses and wear characteristics of the system,the laminated shell element is used to establish the finite element model(FEM)of a flexibly coated casing system.Using the shell element,the blade is modeled,and the surface stress of the blade is calculated.The stress-solving method of the blade is validated through comparisons with the measured time-domain waveform of the stress.Then,a dynamic model of a blade-flexibly coated casing system with rubbing is proposed,accounting for the time-varying mass and stiffness of the casing caused by coating wear.The effects of the proposed flexible casing model are compared with those of a rigid casing model,and the stress changes induced by rubbing are investigated.The results show that the natural characteristics of the coated casing decrease due to the coating wear.The flexibly coated casing model is found to be more suitable for studying casing vibration.Additionally,the stress changes caused by rubbing are slight,and the change in the stress maximum is approximately 5%under the influence of the abrasive coating.展开更多
It is well known that the A-square term must be considered in both cavity and circuit quantum electrodynamics systems,because it arises in the derivation from the minimal coupling Hamiltonian at any finite coupling st...It is well known that the A-square term must be considered in both cavity and circuit quantum electrodynamics systems,because it arises in the derivation from the minimal coupling Hamiltonian at any finite coupling strength.In this paper,we study the quantum Rabi model with A-square terms using the Bogoliubov operator approach.After a unitary transformation,the A-square terms can be eliminated,resulting in a modified quantum Rabi model with renormalized parameters.A transcendental function responsible for the exact solution is then derived.The presence of the A-square terms is found to significantly alter the energy spectrum.The dynamics are also studied using the obtained exact wave function,which is sensitive to the strength of the A-square terms at strong coupling.We believe that these results could be observed in future light–matter interaction systems in the ultra-strong and deep strong coupling regimes.展开更多
This paper investigates the capabilities of large language models(LLMs)to leverage,learn and create knowledge in solving computational fluid dynamics(CFD)problems through three categories of baseline problems.These ca...This paper investigates the capabilities of large language models(LLMs)to leverage,learn and create knowledge in solving computational fluid dynamics(CFD)problems through three categories of baseline problems.These categories include(1)conventional CFD problems that can be solved using existing numerical methods in LLMs,such as lid-driven cavity flow and the Sod shock tube problem;(2)problems that require new numerical methods beyond those available in LLMs,such as the recently developed Chien-physics-informed neural networks for singularly perturbed convection-diffusion equations;and(3)problems that cannot be solved using existing numerical methods in LLMs,such as the ill-conditioned Hilbert linear algebraic systems.The evaluations indicate that reasoning LLMs overall outperform non-reasoning models in four test cases.Reasoning LLMs show excellent performance for CFD problems according to the tailored prompts,but their current capability in autonomous knowledge exploration and creation needs to be enhanced.展开更多
A three-dimensional model for gas-solid flow in a circulating fluidized bed（CFB） riser was developed based on computational particle fluid dynamics（CPFD）.The model was used to simulate the gas-solid flow behavior ...A three-dimensional model for gas-solid flow in a circulating fluidized bed（CFB） riser was developed based on computational particle fluid dynamics（CPFD）.The model was used to simulate the gas-solid flow behavior inside a circulating fluidized bed riser operating at various superficial gas velocities and solids mass fluxes in two fluidization regimes,a dilute phase transport（DPT） regime and a fast fluidization（FF） regime.The simulation results were evaluated based on comparison with experimental data of solids velocity and holdup,obtained from non-invasive automated radioactive particle tracking and gamma-ray tomography techniques,respectively.The agreement of the predicted solids velocity and holdup with experimental data validated the CPFD model for the CFB riser.The model predicted the main features of the gas-solid flows in the two regimes;the uniform dilute phase in the DPT regime,and the coexistence of the dilute phase in the upper region and the dense phase in the lower region in the FF regime.The clustering and solids back mixing in the FF regime were stronger than those in the DPT regime.展开更多
基金Supported by the National Key Research and Development Program of China(2017YFB0103801)
文摘Multi-body dynamics,relative coordinates and graph theory are combined to analyze the structure of a vehicle suspension.The dynamic equations of the left front suspension system are derived for modeling.First,The pure tire theory model is used as the input criteria of the suspension multibody system dynamic model in order to simulate the suspension K&C characteristics test.Then,it is important to verify the accuracy of this model by comparing and analyzing the experimental data and simulation results.The results show that the model has high precision and can predict the performance of the vehicle.It also provides a new solution for the vehicle dynamic modeling.
文摘Based on the principle of vehicle-track coupling dynamics, SIMPACK multi-body dynamics software is used to establish a C80 wagon line-coupled multi-body dynamics model with 73 degrees of freedom. And the reasonableness of the line-coupled dynamics model is verified by using the maximum residual acceleration, the nonlinear critical speed of the wagon. The experimental results show that the established vehicle line coupling dynamics model meets the requirements of vehicle line coupling dynamics modeling.
基金supported by the confidential research grant No.a8317。
文摘To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.
基金supported by the National Natural Science Foundation of China(Grant Nos.12172109,12202121,and 12302293)the China Postdoctoral Science Foundation(Grant Nos.2023M730866 and 2023T160166)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(Grant No.2022A1515011492)the Shenzhen Science and Technology Program(Grant Nos.JCYJ20220531095605012,KJZD20230923115210021,and 29853MKCJ202300205).
文摘Data-driven reduced-order modeling opens new avenues of understanding,predicting,controlling,and optimizing system behavior.Simple systems may have state spaces in which sparse human-interpretable dynamical systems can be identified.This approach has been pioneered by Brunton et al.(2016,PNAS)with sparse identification of nonlinear dynamics.Complex systems,however,cannot be expected to benefit from such simple analytical descriptions.Yet,smoothness may be exploited by analytical local descriptions.In this paper,we identify a clusterwise polynomial dynamics from time-resolved snapshot data.The full state space is partitioned into clusters with a reduced-order polynomial description for each cluster and a global patching strategy.The resulting clusterwise modeling is entirely data-driven and requires no prior knowledge of the system dynamics.We illustrate the approach on the well-known chaotic Lorenz and Rössler systems,on the more challenging chaotic fluid flow dynamics of higher state-space dimensions,on a noisy electrocardiogram signal,and finally on the time evolution of the monthly sunspot number.Clusterwise modeling offers a powerful and interpretable paradigm for dynamical modeling.Nonlinear dynamics can be approximated by assembling many simple local models of different resolutions,opening new paths to understand and control intricate nonlinearities.
基金Supported by National Natural Science Foundation of China(Grant Nos.T2121003 and 91748201).
文摘In recent years,there has been a surge of interest in air-ground collaborative robotics technologies.Our research group designs a novel combination-separation air-ground robot(CSAGR),which exhibits rapid automatic combination and separation capabilities.During the combination process,contact effects between robots,as well as between robots and the environment,are unavoidable.Therefore,it is essential to conduct detailed and accurate modeling and analysis of the collision impact intensity and transmission pathways within the robotic system to ensure the successful execution of the combination procedure.This paper addresses the intricate surface geometries and multi-point contact challenges present in the contact regions of dual robots by making appropriate modifications to the traditional continuous contact force model and applying equivalent processing techniques.The validity of the developed model is confirmed through comparisons with results obtained from finite element analysis(FEA),which demonstrates its high fidelity.Additionally,the impact of this model on control performance is analyzed within the flight control system,thereby further ensuring the successful completion of the combination process.This research represents a pioneering application and validation of continuous contact theory in the dynamics of collisions within dual robot systems.
文摘The pH-sensitive hydrogels play a crucial role in applications such as soft robotics,drug delivery,and biomedical sensors,as they require precise control of swelling behaviors and stress distributions.Traditional experimental methods struggle to capture stress distributions due to technical limitations,while numerical approaches are often computationally intensive.This study presents a hybrid framework combining analytical modeling and machine learning(ML)to overcome these challenges.An analytical model is used to simulate transient swelling behaviors and stress distributions,and is confirmed to be viable through the comparison of the obtained simulation results with the existing experimental swelling data.The predictions from this model are used to train neural networks,including a two-step augmented architecture.The initial neural network predicts hydration values,which are then fed into a second network to predict stress distributions,effectively capturing nonlinear interdependencies.This approach achieves mean absolute errors(MAEs)as low as 0.031,with average errors of 1.9%for the radial stress and 2.55%for the hoop stress.This framework significantly enhances the predictive accuracy and reduces the computational complexity,offering actionable insights for optimizing hydrogel-based systems.
基金supported by the National Key R&D Program of China (Grant No.2022YFD2202102).
文摘With the benefits of small turning radius and high trafficability, the articulated steering half-track tractor had been widely utilized in orchard and small spaced farmland. To study the dynamic performance of the articulated steering half-track tractor and provide a model basis for studying the path tracking control, an accurate multi-body dynamic model of the tractor was required. In this study, the crucial parameters in the dynamic model construction of the tractor were investigated. Firstly, the topology model of the components of the half-track tractor was built by RecurDyn, in which the movement subs and driver functions were given. Secondly, considering the difference of dynamic characteristic of the articulated steering tractor with respect to different pavement hardnesses, the soft and hard pavement models were constructed by employing the harmonic superposition method. Finally, the simulations of the half-track tractor under straight-line and swerve had been conducted on the two types of pavements, and the simulation results were compared with the experimental and theoretical results. The results indicated that the average speed error of the dynamic model on hard pavement and farmland soft pavement were 2.7% and 2.1% compared with the real tractor tests. At the same time, the straight-line driving offset errors of the dynamic model on the two pavements were 1.6% and 3.8% for the front wheels and the rear wheels offset errors were 3.9% and 2.4%, respectively. Furthermore, the turning radius error under front wheel steering was 8.2% and the error under articulated steering was 5.3%. It is proved that the established dynamic model had high accuracy, which provides an efficient approach to analyze the dynamic features of the half-track tractor.
基金This research project was financially supported by China Ocean Mineral Resources R&D Association(Grant No.DY105-03-02-17)Ph.D.Programs Foundation of Ministry of Education of China(Grant No.20060008025)
文摘In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting system is established. Under the four-grade and six-grade oceanic condition, dynamic responses of lifting system are simulated and experiment verified. The simulation results are consistent with experimental ones. The maximum moment of flexion is 322 kN-m on the first pipe under six-grade sea condition. It is seen that the articulated connection can reduce the moment of flexion. The bending deformation of pipe center is researched, and the maximum is 0. 000479 m on the first pipe. Deformation has a little effect on the motion of system. It is feasible to analyze articulated lifting system by applying the theory of flexible multi-body dynamics. The articulated lifting system is obviously better than the fixed one.
基金supported by the National Natural Science Foundation of China(Grant No.12272018)the National Key Basic Research Project(2022JCJQZD20600).
文摘Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.
基金sponsored by the U.S.Department of Housing and Urban Development(Grant No.NJLTS0027-22)The opinions expressed in this study are the authors alone,and do not represent the U.S.Depart-ment of HUD’s opinions.
文摘This paper addresses urban sustainability challenges amid global urbanization, emphasizing the need for innova tive approaches aligned with the Sustainable Development Goals. While traditional tools and linear models offer insights, they fall short in presenting a holistic view of complex urban challenges. System dynamics (SD) models that are often utilized to provide holistic, systematic understanding of a research subject, like the urban system, emerge as valuable tools, but data scarcity and theoretical inadequacy pose challenges. The research reviews relevant papers on recent SD model applications in urban sustainability since 2018, categorizing them based on nine key indicators. Among the reviewed papers, data limitations and model assumptions were identified as ma jor challenges in applying SD models to urban sustainability. This led to exploring the transformative potential of big data analytics, a rare approach in this field as identified by this study, to enhance SD models’ empirical foundation. Integrating big data could provide data-driven calibration, potentially improving predictive accuracy and reducing reliance on simplified assumptions. The paper concludes by advocating for new approaches that reduce assumptions and promote real-time applicable models, contributing to a comprehensive understanding of urban sustainability through the synergy of big data and SD models.
基金co-supported by the National Natural Science Foundation of China (No. 60904038)the Aeronautical Science Foundation of China (Nos. 20141396012 and 20121396008)
文摘The nonlinear aircraft model with heavy cargo moving inside is derived by using the sep- aration body method, which can describe the influence of the moving cargo on the aircraft attitude and altitude accurately. Furthermore, the nonlinear system is decoupled and linearized through the input^utput feedback linearization method. On this basis, an iterative quasi-sliding mode （SM） flight controller for speed and pitch angle control is proposed. At the first-level SM, a global dynamic switching function is introduced thus eliminating the reaching phase of the sliding motion. At the second-level SM, a nonlinear function with the property of ＂smaUer errors correspond to bigger gains and bigger errors correspond to saturated gains＂ is designed to form an integral sliding manifold, and the overcompensation of the integral term to big errors is weakened. Lyapunov- based analysis shows that the controller with strong robustness can reject both constant and time-varying model uncertainties. The performance of the proposed control strategy is verified in a maximum load airdrop mission.
文摘The analysis of the passive rotation feature of a micro Flapping Rotary Wing（FRW）applicable for Micro Air Vehicle（MAV） design is presented in this paper. The dynamics of the wing and its influence on aerodynamic performance of FRW is studied at low Reynolds number（~10~3）.The FRW is modeled as a simplified system of three rigid bodies： a rotary base with two flapping wings. The multibody dynamic theory is employed to derive the motion equations for FRW. A quasi-steady aerodynamic model is utilized for the calculation of the aerodynamic forces and moments. The dynamic motion process and the effects of the kinematics of wings on the dynamic rotational equilibrium of FWR and the aerodynamic performances are studied. The results show that the passive rotation motion of the wings is a continuous dynamic process which converges into an equilibrium rotary velocity due to the interaction between aerodynamic thrust, drag force and wing inertia. This causes a unique dynamic time-lag phenomena of lift generation for FRW, unlike the normal flapping wing flight vehicle driven by its own motor to actively rotate its wings. The analysis also shows that in order to acquire a high positive lift generation with high power efficiency and small dynamic time-lag, a relative high mid-up stroke angle within 7–15° and low mid-down stroke angle within -40° to -35° are necessary. The results provide a quantified guidance for design option of FRW together with the optimal kinematics of motion according to flight performance requirement.
基金supported by grants from the Research Grant Council of the Hong Kong Special Administrative Region,China(Project No.HKU 17207518).
文摘This paper presents a dynamic modeling method to test and examine the minimum mass of pressurized pore-gas for triggering landslides in stable gentle soil slopes.A stable gentle soil slope model is constructed with a dry cement powder core,a saturated clay middle layer,and a dry sand upper layer.The test injects H_(2)O_(2)solution into the cement core to produce new pore-gas.The model test includes three identical H_(2)O_(2)injections.The small mass of generated oxygen gas(0.07%of slope soil mass and landslide body)from the first injection can build sufficient pore-gas pressure to cause soil upheaval and slide.Meanwhile,despite the first injection causing leak paths in the clay layer,the generated small mass of gas from the second and third injections can further trigger the landslide.A dynamic theoretical analysis of the slope failure is carried out and the required minimum pore-gas pressure for the landslide is calculated.The mass and pressure of generated gas in the model test are also estimated based on the calibration test for oxygen generation from H_(2)O_(2)solution in cement powder.The results indicate that the minimum mass of the generated gas for triggering the landslide is 2 ppm to 0.07%of the landslide body.Furthermore,the small mass of gas can provide sufficient pressure to cause soil upheaval and soil sliding in dynamic analysis.
基金Weapons Preliminary Research Key Foundation of China (9140A01010106HK0307)
文摘This article investigates the dynamic characteristics of deflectable nose missiles with rotary single-channel control. After introduction of effective attack and sideslip angles as well as quasi-body coordinates based on the spin characteristics of the missile＇s body, an integrated rigid kinetic model of missile with deflectable nose control is set up in the quasi-body coordinates considering the interaction between the missile＇s nose and body by using rootless multi-rigid-body system dynamics and is linearized. Then an analysis with simulation is conducted to investigate the coupling characteristics between the channels, the influences of nose deflection on the body and the dynamic characteristics of missile＇s body. The results indicate that various channels of missiles with deflectable nose control are coupled cross-linked; the nose deflection tends to make the body move in the opposite direction and, finally, evidences the correctness and reasonability of the kinetic model proposed by this article.
基金Project supported by the National Natural Science Foundation of China (Grant No. 72301184)the Natural Science Foundation of Sichuan Province of China (Grant No. 2024NSFSC1073)the Fundamental Research Funds for the Central Universities (Grant No. YJ202329)。
文摘Efficiency and safety are paramount concerns for commuters, operators, and designers in subway stations. This study conducted controlled experiments and developed a modified force-based model to investigate the dynamics of pedestrian counterflow at bottlenecks, utilizing subway passenger alighting and boarding as a case study. Specifically, the efficiency and safety of three distinct movement modes: the cooperative mode(Coop), the combination of cooperative and competitive mode(C & C), and the competitive mode(Comp), were examined and compared. The experimental findings revealed that the C & C mode exhibited a clear lane formation phenomenon and demonstrated a higher flow rate than the Comp and Coop modes. This observation suggests that a combination of cooperative and competitive behaviors among pedestrians can positively enhance traffic efficiency and safety during the alighting and boarding process. In contrast, pedestrians exhibited increased detouring in their paths and more fluctuating trajectories in the Comp mode. Additionally, a questionnaire survey assessing the level of competition and cooperation among pedestrians provided a comprehensive analysis of the psychological dynamics of passengers during the alighting and boarding activities. Lastly, the proposed force-based model was calibrated and validated, demonstrating a good performance in accurately replicating the overall characteristics of the experimental process. Overall, this study offers valuable insights into enhancing the pedestrian traffic efficiency and safety within subway systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.52306126,22350710788,12432010,11988102,92270203)the Xplore Prize.
文摘Configuring computational fluid dynamics(CFD)simulations typically demands extensive domain expertise,limiting broader access.Although large language models(LLMs)have advanced scientific computing,their use in automating CFD workflows is underdeveloped.We introduce a novel approach centered on domain-specific LLM adaptation.By fine-tuning Qwen2.5-7B-Instruct on NL2FOAM,our custom dataset of 28,716 natural language-to-OpenFOAM configuration pairs with chain-of-thought(CoT)annotations enables direct translation from natural language descriptions to executable CFD setups.A multi-agent system orchestrates the process,autonomously verifying inputs,generating configurations,running simulations,and correcting errors.Evaluation on a benchmark of 21 diverse flow cases demonstrates state-of-the-art performance,achieving 88.7%solution accuracy and 82.6%first-attempt success rate.This significantly outperforms larger general-purpose models such as Qwen2.5-72B-Instruct,DeepSeek-R1,and Llama3.3-70B-Instruct,while also requiring fewer correction iterations and maintaining high computational efficiency.The results highlight the critical role of domain-specific adaptation in deploying LLM assistants for complex engineering workflows.Our code and fine-tuned model have been deposited at https://github.com/YYgroup/AutoCFD.
基金Project supported by the National Science and Technology Major Project(No.J2022-IV-0005-0022)the Aero Science Foundation of China(No.20230015050001)the Shenyang Science and Technology Plan Project of China(No.24-202-6-01)。
文摘As a common fault of the aero-engine,the blade-casing rubbing(BCR)has the potential to cause catastrophic accidents.In this paper,to investigate the dynamic responses and wear characteristics of the system,the laminated shell element is used to establish the finite element model(FEM)of a flexibly coated casing system.Using the shell element,the blade is modeled,and the surface stress of the blade is calculated.The stress-solving method of the blade is validated through comparisons with the measured time-domain waveform of the stress.Then,a dynamic model of a blade-flexibly coated casing system with rubbing is proposed,accounting for the time-varying mass and stiffness of the casing caused by coating wear.The effects of the proposed flexible casing model are compared with those of a rigid casing model,and the stress changes induced by rubbing are investigated.The results show that the natural characteristics of the coated casing decrease due to the coating wear.The flexibly coated casing model is found to be more suitable for studying casing vibration.Additionally,the stress changes caused by rubbing are slight,and the change in the stress maximum is approximately 5%under the influence of the abrasive coating.
基金supported by the National Science Foundation of China under Grant Nos.12305009(XYC)and 11834005(QHC)the China Postdoctoral Science Foundation under Grant No.2022M720387(XYC).
文摘It is well known that the A-square term must be considered in both cavity and circuit quantum electrodynamics systems,because it arises in the derivation from the minimal coupling Hamiltonian at any finite coupling strength.In this paper,we study the quantum Rabi model with A-square terms using the Bogoliubov operator approach.After a unitary transformation,the A-square terms can be eliminated,resulting in a modified quantum Rabi model with renormalized parameters.A transcendental function responsible for the exact solution is then derived.The presence of the A-square terms is found to significantly alter the energy spectrum.The dynamics are also studied using the obtained exact wave function,which is sensitive to the strength of the A-square terms at strong coupling.We believe that these results could be observed in future light–matter interaction systems in the ultra-strong and deep strong coupling regimes.
基金supported by the National Natural Science Foundation of China Basic Science Center Program for“Multiscale Problems in Nonlinear Mechanics”(Grant No.11988102)the National Natural Science Foundation of China(Grant No.12202451).
文摘This paper investigates the capabilities of large language models(LLMs)to leverage,learn and create knowledge in solving computational fluid dynamics(CFD)problems through three categories of baseline problems.These categories include(1)conventional CFD problems that can be solved using existing numerical methods in LLMs,such as lid-driven cavity flow and the Sod shock tube problem;(2)problems that require new numerical methods beyond those available in LLMs,such as the recently developed Chien-physics-informed neural networks for singularly perturbed convection-diffusion equations;and(3)problems that cannot be solved using existing numerical methods in LLMs,such as the ill-conditioned Hilbert linear algebraic systems.The evaluations indicate that reasoning LLMs overall outperform non-reasoning models in four test cases.Reasoning LLMs show excellent performance for CFD problems according to the tailored prompts,but their current capability in autonomous knowledge exploration and creation needs to be enhanced.
基金support by the National Basic Research Program (Grant No. 2010CB226906,and 2012CB215000)
文摘A three-dimensional model for gas-solid flow in a circulating fluidized bed（CFB） riser was developed based on computational particle fluid dynamics（CPFD）.The model was used to simulate the gas-solid flow behavior inside a circulating fluidized bed riser operating at various superficial gas velocities and solids mass fluxes in two fluidization regimes,a dilute phase transport（DPT） regime and a fast fluidization（FF） regime.The simulation results were evaluated based on comparison with experimental data of solids velocity and holdup,obtained from non-invasive automated radioactive particle tracking and gamma-ray tomography techniques,respectively.The agreement of the predicted solids velocity and holdup with experimental data validated the CPFD model for the CFB riser.The model predicted the main features of the gas-solid flows in the two regimes;the uniform dilute phase in the DPT regime,and the coexistence of the dilute phase in the upper region and the dense phase in the lower region in the FF regime.The clustering and solids back mixing in the FF regime were stronger than those in the DPT regime.
