Current improved Empirical Mode Decomposition(EMD)methods enhance the accurate identification of peak and valley points in mechanical signals through noise-assisted filtering techniques,thereby improving the mode deco...Current improved Empirical Mode Decomposition(EMD)methods enhance the accurate identification of peak and valley points in mechanical signals through noise-assisted filtering techniques,thereby improving the mode decomposition performance,which is of great significance in extracting fault features from mechanical signals.However,noise-assisted filtering leads to the loss of critical features in mechanical signals and introduces a large amount of residual noise into Intrinsic Mode Functions(IMFs)that obscure signal features.To address these issues,a Precise Identification-based Mode Decomposition(PIMD)method is proposed.This method directly enhances the ability of EMD to precisely identify peak and valley points by using a proposed precise identifi-cation approach,which improves mode decomposition performance and avoids the negative impacts of noise-assisted filtering,thus benefiting the extraction of more mechanical fault features.Simulation results show that the proposed PIMD method can precisely identify peak and valley points of signals with noise of different signal-tonoise ratios and perform a highly rigorous high-low frequency decomposition,significantly outperforming EMD.Finally,mechanical fault diagnostic experiments on four bearing cases and two gear cases demonstrate that,compared to four mainstream methods,the PIMD method exhibits the best mode decomposition perfor-mance and can extract more and clearer mechanical fault features.展开更多
The synthesis of high-quality heteroepitaxial diamond films on iridium composite substrates is a critical step toward advancing diamond for electronic and optical applications.Microwave plasma chemical vapor depositio...The synthesis of high-quality heteroepitaxial diamond films on iridium composite substrates is a critical step toward advancing diamond for electronic and optical applications.Microwave plasma chemical vapor deposition,combined with in situ optical emission spectroscopy,enables precise control over growth modes through plasma parameter tuning.In this study,we examine how methane concentration,microwave power,and gas pressure influence plasma species and,consequently,the growth modes of heteroepitaxial diamond by optical emission spectroscopy and scanning electron microscope.At low nucleation densities,increased methane concentrations promote the transition from faceted polyhedral to ballas structures,driven by elevated C_(2) radical concentrations in the plasma.Conversely,at higher nucleation densities,gas pressure,and substrate temperature dominate growth mode determination,leading to diverse morphologies,such as planar,polycrystalline,octahedral,and step-flow growth.These findings elucidate the interplay among plasma species,growth parameters,and growth mode,offering critical insights for optimizing growth conditions and preparing heteroepitaxial diamond films in a specific growth mode.展开更多
Auroral kilometric radiation(AKR),a fundamental plasma emission in Earth's magnetosphere,exhibits three characteristic modes:the right-handed extraordinary(R-X),left-handed ordinary(L-O)and left-handed extraordina...Auroral kilometric radiation(AKR),a fundamental plasma emission in Earth's magnetosphere,exhibits three characteristic modes:the right-handed extraordinary(R-X),left-handed ordinary(L-O)and left-handed extraordinary(L-X)modes.The role of AKR in magnetosphere−ionosphere−atmosphere coupling depends sensitively on its wave mode.While previous studies have primarily focused on the dominant R-X mode,we present the first systematic identification of all three modes using a practical polarization analysis method based on Arase satellite observations.This method employs a spin-axis-relative Ratio:when the satellite's spin axis aligns with the background magnetic field,a positive(negative)Ratio indicates the right-handed(left-handed)polarization,with reversal under anti-parallel conditions.Combined polarization-frequency analysis reveals that R-X,L-O,and L-X modes can exist in both dayside and nightside regions,with power spectral densities up to 10^(-6)mV^(2)m^(-2)Hz^(-1).This study resolves long-standing ambiguities in AKR mode classification and has implications for understanding AKR-induced electron dynamics.展开更多
Using multi-source reanalysis data,this study examines the relationship between the tropical Pacific-Atlantic SST Dipole Mode(TPA-DM)and summer precipitation in North China(NCSP)on the interannual timescale during the...Using multi-source reanalysis data,this study examines the relationship between the tropical Pacific-Atlantic SST Dipole Mode(TPA-DM)and summer precipitation in North China(NCSP)on the interannual timescale during the period of 1979-2022.The results show that the TPA-DM,the dominant pattern of interannual variability in the tropical Pacific and Atlantic regions,exhibits a significant negative correlation with NCSP.The positive phase of TPA-DM induces subsidence over the Maritime Continent through a zonal circulation pattern,which initiates a Pacific-Japan-like wave train along the East Asian coast.The circulation anomalies lead to moisture deficits and convergence subsidence over North China,leading to below-normal rainfall.Further analysis reveals that cooler SST in the Southern Tropical Atlantic facilitates the persistence of the TPA-DM by stimulating the anomalous Walker circulation associated with wind-evaporation-SST-convection feedback.展开更多
Mycorrhizal symbioses are prevalent in terrestrial ecosystems and play essential roles in plant nutrition and health.However,the relative importance of plant evolutionary history,physiology,and eco-geographical factor...Mycorrhizal symbioses are prevalent in terrestrial ecosystems and play essential roles in plant nutrition and health.However,the relative importance of plant evolutionary history,physiology,and eco-geographical factors in shaping mycorrhizal fungal community assembly remains poorly understood.Here,we investigate how plant phylogeny,trophic mode,biogeographic distribution and environmental niche collectively influence the diversity and composition of mycorrhizal fungal communities across the Orchidaceae,spanning broad phylogenetic and ecological scales.By using family-wide orchid-fungal associations and global occurrence data,our analyses showed that the variation in fungal diversity and community structure can be partially explained by orchids’trophic mode,biogeographic distribution and environmental niche,but not by their overall phylogenetic relatedness.Among trophic modes,partially mycoheterotrophic orchids exhibited the highest level of fungal diversity(the lowest level of fungal specificity)in association with a broad range of phylogenetically dispersed fungal partners.Between biogeographical regions,a significantly higher level of fungal specificity was found for orchid species distributed in Australia than those in Eurasia and Africa.Furthermore,multivariate analyses showed that a small portion of the variation in fungal community structure was significantly related to broad climate,soil and vegetation variables,indicating the existence of large-scale habitat filtering on orchid mycorrhizal communities.Altogether,our findings indicate that mycorrhizal communities in the orchid family are likely shaped by multiple,intertwined factors related to orchid ecophysiology and biogeography on a global scale.展开更多
The subantarctic mode water(SAMW)represents a large water mass in the Southern Ocean.This body of water forms through deep convection(subduction)in winter and contributes to the uptake and storage of anthropogenic hea...The subantarctic mode water(SAMW)represents a large water mass in the Southern Ocean.This body of water forms through deep convection(subduction)in winter and contributes to the uptake and storage of anthropogenic heat.However,its longterm changes in subduction rate and volume in response to shifting climate conditions are unclear.In this study,we investigated the long-term trend of the subduction rate and volume of the South Pacific–SAMW(SPSAMW)using Simple Ocean Data Assimilation outputs during 1980–2017.The results show the overall increasing trend of the subduction rate of the SPSAMW.The increased subduction of the SPSAMW directly contributes to the volume variation in the SPSAMW.The increased subduction in the South Pacific reached(0.28±0.16)Sv-1 per year,which explains nearly 68%of the volume increase in the SPSAMW.This variability in the SPSAMW reflects alterations in the overlying atmosphere.The positive to negative phase change of the Interdecadal Pacific Oscillation(IPO)in 1980–2017 deepened the Amundsen Sea Low(ASL)via atmospheric teleconnections over the South Pacific.Further analysis reveals that the increased westerly winds during the deepening of ASL resulted in more cold water transport from the south,which deepened the winter mixed layer and thus increased subduction and volume within the SPSAMW subduction region.This finding suggests the association of the long-term trends of SPSAMW subduction and volume with the phase change of the IPO.展开更多
This paper introduces a framework for modeling random fields,with a particular emphasis on analyzing anisotropic spatial variability.It establishes a clear connection between the correlation function and the Kriging v...This paper introduces a framework for modeling random fields,with a particular emphasis on analyzing anisotropic spatial variability.It establishes a clear connection between the correlation function and the Kriging variogram across various anisotropic modes,providing mathematical models to enhance our understanding of random fields.A new anisotropy index,called LSAI,is introduced to quantify anisotropy based on the autocorrelation length and the orientation of the principal axes within the variogram.An LSAI value closer to one indicates a lower degree of anisotropy.The present study examines how the degree of anisotropy varies with different autocorrelation lengths and angles between the principal axes,providing valuable insights into these relationships.To improve the accuracy of parameter probability distribution estimations,this study integrates limited field test data using a Bayesian inference approach.Additionally,the Markov chain Monte Carlo simulation method is employed to develop a conditional random field(CRF)for the deformation modulus.By incorporating data from field bearing plate tests,the posterior variance data for the deformation modulus are derived.This process facilitates the construction of a detailed and reliable CRF for the deformation modulus.展开更多
Climate models are essential for understanding past,present,and future changes in atmospheric circulation,with circulation modes providing key sources of seasonal predictability and prediction uncertainties for both g...Climate models are essential for understanding past,present,and future changes in atmospheric circulation,with circulation modes providing key sources of seasonal predictability and prediction uncertainties for both global and regional climates.This study assesses the performance of models participating in phase 6 of the Coupled Model Intercomparison Project in simulating interannual variability modes of Northern Hemisphere 500-hPa geopotential height during winter and summer,distinguishing predictable(potentially predictable on seasonal or longer timescales)and unpredictable(intraseasonal and essentially unpredictable at long range)components,using reanalysis data and a variance decomposition method.Although most models effectively capture unpredictable modes in reanalysis,their ability to reproduce dominant predictable modes-specifically the Pacific-North American pattern,Arctic Oscillation,and Western Pacific Oscillation in winter,and the East Atlantic and North Atlantic Oscillations in summer-varies notably.An optimal ensemble is identified to distinguish(a)predictable-external modes,dominated by external forcing,and(b)predictable-internal modes,associated with slow internal variability,during the historical period(1950-2014)and the SSP5-8.5 scenario(2036-2100).Under increased radiative forcing,the leading winter/summer predictable-external mode exhibits a more uniform spatial distribution,remarkably larger trend and annual variance,and enhanced height-sea surface temperature(SST)covariance under SSP5-8.5 compared to historical conditions.The dominant winter/summer predictable-internal modes also exhibit increased variance and height-SST covariance under SSP5-8.5,along with localized changes in spatial configuration.Minimal changes are observed in spatial distribution or variance for dominant winter/summer unpredictable modes under SSP5-8.5.This study,from a predictive perspective,deepens our understanding of model uncertainties and projected changes in circulations.展开更多
Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombinati...Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombination during mode shift induces a significant torque shock.Therefore,a smooth transient process,among other concerns,typically associated with this category of vehicles,is of great importance.The present research aims to introduce a novel control strategy to manage the dynamic torque of multiple power sources and therefore im-prove ride comfort.To this end,a dynamic model of the objective power-split HEV is first built.To resolve the contention between vehicle jerk and clutch friction loss,a model predictive control(MPC)combined with control allocation(CA)is then designed for the clutch-engaged phase.To reduce the torque fluctuation caused by the inertia torques of multiple power sources,a dynamic compensation control strategy(DCcs)that coordinates motorgenerator torque to compensate for the transition torque is proposed for the brake-disengaged phase.Finally,the proposed control strategy is validated by simulation and bench test,and results show great potential in reducing shift duration,torque variation,vehicle jerk and friction loss(the simulation results show decreases of 22%,39%,83%and 53%,and the experimental results show decreases of 21%,74%,77%,and 59%,re-spectively),thereby improving shift quality.展开更多
Flexible materials play a crucial role in protecting against behind armour blunt trauma(BABT).However,their compliance complicates the understanding of failure mechanisms and energy absorption.This study used a combin...Flexible materials play a crucial role in protecting against behind armour blunt trauma(BABT).However,their compliance complicates the understanding of failure mechanisms and energy absorption.This study used a combined experimental and numerical approach to investigate the response and failure modes of a flexible ultra-high-molecular-weight polyethylene(UHMWPE)foam protective sandwich structure(UFPSS)under low-velocity impact(LVI).A finite element(FE)model,accounting for nonlinear large deformation and strain-rate-dependent material behavior,was developed for a woven-UFPSS(featuring a plain-woven fabric structure)subjected to a 50 J impact.Experimental and numerical results showed strong agreement in peak force(error<5%),maximum displacement(error<6%),and buffer time(error<8%).The impact's kinetic energy was mainly converted into internal energy of the fabric and foam materials(~50%),viscous dissipation in the foam core(12%-15%),frictional work at the contact interfaces(5%-6%),and work by the pneumatic fixture clamping force(~38%).This study provides the first investigation of the LVI performance of sandwich structures with all soft material layers,offering significant insights for the application of compliant materials in protective fields.展开更多
In this paper,a unified terminal sliding mode(UTSM)control method is proposed for second-order nonlinear systems with uncertainties and disturbances.It is seen that the newly defined terminal sliding surface is integr...In this paper,a unified terminal sliding mode(UTSM)control method is proposed for second-order nonlinear systems with uncertainties and disturbances.It is seen that the newly defined terminal sliding surface is integrated with both conventional and fast terminal sliding mode and exhibits design advantages such as a variable exponent,adjustable sliding mode parameters,and chattering-alleviation effect.The inherent dynamic properties of the closed-loop systems with the UTSM control are discussed in detail via the phase plane and Lyapunov stability theory.Both numerical simulations and experimental results show the flexible sliding manifold design,strong robustness against uncertain dynamics,and effective attenuation of chattering phenomenon.展开更多
This paper proposes a trajectory tracking control scheme for vertical/short take-off and landing(V/STOL)vehicles.Owing to their high number of controllable degrees of freedom and strong nonlinearity,the design of flig...This paper proposes a trajectory tracking control scheme for vertical/short take-off and landing(V/STOL)vehicles.Owing to their high number of controllable degrees of freedom and strong nonlinearity,the design of flight control systems for such vehicles presents considerable challenges,particularly in developing controllers capable of accurately tracking specified trajectories.Building on existing control strategies for various vehicle types,this study introduces an extended control framework tailored for V/STOL systems.The proposed scheme consists of two nested loops:an outer position control loop and an inner attitude control loop.The position loop employs a proportional-integral-derivative(PID)control algorithm,whereas the attitude loop utilizes an anti-saturation integral sliding mode control algorithm.This approach effectively alleviates the integral oversaturation issue inherent in conventional sliding mode methods and suppresses buffeting through a boundary layer technique.Simulation results demonstrate the efficacy of the proposed control strategy.展开更多
In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-pin...In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.展开更多
In this paper,a security defense issue is investigated for networked control systems susceptible to stochastic denial of service(DoS) attacks by using the sliding mode control method.To utilize network communication r...In this paper,a security defense issue is investigated for networked control systems susceptible to stochastic denial of service(DoS) attacks by using the sliding mode control method.To utilize network communication resources more effectively,a novel adaptive event-triggered(AET) mechanism is introduced,whose triggering coefficient can be adaptively adjusted according to the evolution trend of system states.Differing from existing event-triggered(ET) mechanisms,the proposed one demonstrates exceptional relevance and flexibility.It is closely related to attack probability,and its triggering coefficient dynamically adjusts depending on the presence or absence of an attack.To leverage attacker information more effectively,a switching-like sliding mode security controller is designed,which can autonomously select different controller gains based on the sliding function representing the attack situation.Sufficient conditions for the existence of the switching-like sliding mode secure controller are presented to ensure the stochastic stability of the system and the reachability of the sliding surface.Compared with existing time-invariant control strategies within the triggered interval,more resilient defense performance can be expected since the correlation with attack information is established in both the proposed AET scheme and the control strategy.Finally,a simulation example is conducted to verify the effectiveness and feasibility of the proposed security control method.展开更多
A multi-block model and a corresponding computer program have been developed which predict the kinematics of landslides.Furthermore,a unique event for studying different models simulating the triggering and movement o...A multi-block model and a corresponding computer program have been developed which predict the kinematics of landslides.Furthermore,a unique event for studying different models simulating the triggering and movement of landslides is the 2008Wenchuan earthquake in the mountainous region in Sichuan Province of China,which caused a large number of rapid landslides.The purpose of the paper is two-fold:(a)to propose and incorporate into the multi-block model constitutive relations predicting soil response along slip surfaces,and(b)to apply the multi-block model with the constitutive relations at landslides triggered by the Wenchuan earthquake.The proposed constitutive equations predict the shape of the shear stress-displacement response measured in ring shear tests.In the application,four landslides caused by the Wenchuan earthquake were considered.Only in one of these landslides the shear resistance-displacement response along the slip surface has been measured in laboratory tests.At this landslide,the triggering and movement of the landslide was predicted.In the other landslides,back analyses were performed and it was observed that the multi-block model predicted reasonably well the final configuration of all slides.In addition,as the measured and back-estimated total friction angle of all landslides was less than 180,and the materials along the slip surface were sandy,it is inferred that some,or all of the slip surface during these slides was sheared in an undrained manner and excess pore pressures generated during sliding played a key role in the triggering and movement of these landslides.Concluding,the paper(A)proposed and validated a multi-block constitutive model which can be applied to predict the triggering and movement of earthquake-induced slides and(B)by analyzing four landslides of the 2008 Wenchuan earthquake,it concludes that some,or all of the slip surface during these slides,was sheared in an undrained manner and excess pore pressures generated during sliding played a key role in the triggering and movement of these landslides.展开更多
In order to analyze the hydrodynamic performance of the ducted propeller with high precision, this paper proposes a new method which combines Multi-Block Hybrid Mesh and Reynolds Stress Model (MBHM & RSM). The cal...In order to analyze the hydrodynamic performance of the ducted propeller with high precision, this paper proposes a new method which combines Multi-Block Hybrid Mesh and Reynolds Stress Model (MBHM & RSM). The calculation errors of MBHM & RSM and standard two-equation model (standard k-ε model) on the ducted propeller JD7704 +Ka4-55 are compared. The maximum error of the total thrust coefficient KT, the duct thrust coefficient KTN, the torque coefficient KQ and the open-water efficiency η0 of MBHM & RSM are 2.98%, 4.01%, 1.46%, and 0.89%, respectively, which are lower than those of standard k-ε model. Indeed, the pressure distribution on the propeller surfaces, the pressure and the velocity vector distribution of the flow field are also analyzed, which are consistent with the theory. It is demonstrated that MBHM & RSM on the thruster dynamics analysis are feasible. This paper provides reference in the thruster designing of underwater robot.展开更多
In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis...In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.展开更多
A fast authentication mode based on Multi-Block Chaining (MBC) is put forward; and its security is proved. The MBC mode is for new generation block cipher algorithms. Its speed is about 13% faster than that of the aut...A fast authentication mode based on Multi-Block Chaining (MBC) is put forward; and its security is proved. The MBC mode is for new generation block cipher algorithms. Its speed is about 13% faster than that of the authentication modes in common use (for example, cipher block chaining-message authentication code mode). The dependence test results meet the requirement. The MBC mode is complete; its degree of ava-lanche effect is about 0.9993; its degree of strict avalanche criterion is 0.992 or so. The frequency test results indicate that the output generated by the MBC mode has uniformity. The binary matrix rank test results imply that it is linear independent among disjoint sub-matrices of the output. Maurer’s universal statistical test results show that the output could be significantly compressed without loss of information. Run test, spectral test, non-overlapping template matching test, overlapping template matching test, Lempel-Ziv compression test, linear complexity test, serial test, approximate entropy test, cumulative sums test, random excursions test and random excursions variant test results fulfill the requirements of all. Therefore the MBC mode has good pseudo-randomness. Thus the security of MBC mode is verified by the way of statistical evaluation.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.52075236)Opening Foundation of Intelligent Manufacturing Technology(Shantou University),Ministry of Education(Grant No.STME2024002)+1 种基金Hundred Doctor and Hundred Enterprise,Science and Technology Project,Ji'an City(Grant No.42064001)Guangdong Provincial University Innovation Team Project(Grant No.2020KCXTD012).
文摘Current improved Empirical Mode Decomposition(EMD)methods enhance the accurate identification of peak and valley points in mechanical signals through noise-assisted filtering techniques,thereby improving the mode decomposition performance,which is of great significance in extracting fault features from mechanical signals.However,noise-assisted filtering leads to the loss of critical features in mechanical signals and introduces a large amount of residual noise into Intrinsic Mode Functions(IMFs)that obscure signal features.To address these issues,a Precise Identification-based Mode Decomposition(PIMD)method is proposed.This method directly enhances the ability of EMD to precisely identify peak and valley points by using a proposed precise identifi-cation approach,which improves mode decomposition performance and avoids the negative impacts of noise-assisted filtering,thus benefiting the extraction of more mechanical fault features.Simulation results show that the proposed PIMD method can precisely identify peak and valley points of signals with noise of different signal-tonoise ratios and perform a highly rigorous high-low frequency decomposition,significantly outperforming EMD.Finally,mechanical fault diagnostic experiments on four bearing cases and two gear cases demonstrate that,compared to four mainstream methods,the PIMD method exhibits the best mode decomposition perfor-mance and can extract more and clearer mechanical fault features.
基金funded by the National Key Research and Development Program of China(Grant No.2022YFB3608602)the National Natural Science Foundation of China(Grant Nos.62404215 and 62574199)Instrument and Equipment Development Project of CAS(Grant No.PTYQ2024TD0003)。
文摘The synthesis of high-quality heteroepitaxial diamond films on iridium composite substrates is a critical step toward advancing diamond for electronic and optical applications.Microwave plasma chemical vapor deposition,combined with in situ optical emission spectroscopy,enables precise control over growth modes through plasma parameter tuning.In this study,we examine how methane concentration,microwave power,and gas pressure influence plasma species and,consequently,the growth modes of heteroepitaxial diamond by optical emission spectroscopy and scanning electron microscope.At low nucleation densities,increased methane concentrations promote the transition from faceted polyhedral to ballas structures,driven by elevated C_(2) radical concentrations in the plasma.Conversely,at higher nucleation densities,gas pressure,and substrate temperature dominate growth mode determination,leading to diverse morphologies,such as planar,polycrystalline,octahedral,and step-flow growth.These findings elucidate the interplay among plasma species,growth parameters,and growth mode,offering critical insights for optimizing growth conditions and preparing heteroepitaxial diamond films in a specific growth mode.
基金supported by the National Natural Science Foundation of China(Grants 42374215,42230209,42374199,42304183,42422406,42174185,72061147004 and 72342001)the Science and Technology Development Fund,Macao SAR(File no.0042/2024/RIA1 and 0008/2024/AKP)+1 种基金the Natural Science Foundation of Hunan Province(Grant 2023JJ20038)the Research Project of Science and Technology of Hunan Province(2025JJ10009,2022RC4025,2025QK1004,2023JJ50312,2023JJ50010 and 2024RC9012).
文摘Auroral kilometric radiation(AKR),a fundamental plasma emission in Earth's magnetosphere,exhibits three characteristic modes:the right-handed extraordinary(R-X),left-handed ordinary(L-O)and left-handed extraordinary(L-X)modes.The role of AKR in magnetosphere−ionosphere−atmosphere coupling depends sensitively on its wave mode.While previous studies have primarily focused on the dominant R-X mode,we present the first systematic identification of all three modes using a practical polarization analysis method based on Arase satellite observations.This method employs a spin-axis-relative Ratio:when the satellite's spin axis aligns with the background magnetic field,a positive(negative)Ratio indicates the right-handed(left-handed)polarization,with reversal under anti-parallel conditions.Combined polarization-frequency analysis reveals that R-X,L-O,and L-X modes can exist in both dayside and nightside regions,with power spectral densities up to 10^(-6)mV^(2)m^(-2)Hz^(-1).This study resolves long-standing ambiguities in AKR mode classification and has implications for understanding AKR-induced electron dynamics.
基金jointly supported by the Second Tibetan Plateau Scientific Expedition and Research Program[grant number-ber 2019QZKK0103]the National Natural Science Foundation of China[grant number 42293294]the China Meteorological Admin-istration Climate Change Special Program[grant number QBZ202303]。
文摘Using multi-source reanalysis data,this study examines the relationship between the tropical Pacific-Atlantic SST Dipole Mode(TPA-DM)and summer precipitation in North China(NCSP)on the interannual timescale during the period of 1979-2022.The results show that the TPA-DM,the dominant pattern of interannual variability in the tropical Pacific and Atlantic regions,exhibits a significant negative correlation with NCSP.The positive phase of TPA-DM induces subsidence over the Maritime Continent through a zonal circulation pattern,which initiates a Pacific-Japan-like wave train along the East Asian coast.The circulation anomalies lead to moisture deficits and convergence subsidence over North China,leading to below-normal rainfall.Further analysis reveals that cooler SST in the Southern Tropical Atlantic facilitates the persistence of the TPA-DM by stimulating the anomalous Walker circulation associated with wind-evaporation-SST-convection feedback.
基金the funding provided by the China Scholarship Council(Grant No.201804910634)the Ecology Fund of the Royal Netherlands Academy of Arts and Sciences(KNAWWF/807/19039)to Deyi Wang.
文摘Mycorrhizal symbioses are prevalent in terrestrial ecosystems and play essential roles in plant nutrition and health.However,the relative importance of plant evolutionary history,physiology,and eco-geographical factors in shaping mycorrhizal fungal community assembly remains poorly understood.Here,we investigate how plant phylogeny,trophic mode,biogeographic distribution and environmental niche collectively influence the diversity and composition of mycorrhizal fungal communities across the Orchidaceae,spanning broad phylogenetic and ecological scales.By using family-wide orchid-fungal associations and global occurrence data,our analyses showed that the variation in fungal diversity and community structure can be partially explained by orchids’trophic mode,biogeographic distribution and environmental niche,but not by their overall phylogenetic relatedness.Among trophic modes,partially mycoheterotrophic orchids exhibited the highest level of fungal diversity(the lowest level of fungal specificity)in association with a broad range of phylogenetically dispersed fungal partners.Between biogeographical regions,a significantly higher level of fungal specificity was found for orchid species distributed in Australia than those in Eurasia and Africa.Furthermore,multivariate analyses showed that a small portion of the variation in fungal community structure was significantly related to broad climate,soil and vegetation variables,indicating the existence of large-scale habitat filtering on orchid mycorrhizal communities.Altogether,our findings indicate that mycorrhizal communities in the orchid family are likely shaped by multiple,intertwined factors related to orchid ecophysiology and biogeography on a global scale.
基金supported by the National Natural Science Foundation of China(Nos.42406256,42376034,and 42430402)the Qingdao Postdoctoral Application Research Project(No.QDBSH20220202152)+1 种基金the National Key R&D Program of China(No.2018YFA0605701)the Chinese Arctic and Antarctic Administration(No.IRASCC2020-2022-02-01-03)。
文摘The subantarctic mode water(SAMW)represents a large water mass in the Southern Ocean.This body of water forms through deep convection(subduction)in winter and contributes to the uptake and storage of anthropogenic heat.However,its longterm changes in subduction rate and volume in response to shifting climate conditions are unclear.In this study,we investigated the long-term trend of the subduction rate and volume of the South Pacific–SAMW(SPSAMW)using Simple Ocean Data Assimilation outputs during 1980–2017.The results show the overall increasing trend of the subduction rate of the SPSAMW.The increased subduction of the SPSAMW directly contributes to the volume variation in the SPSAMW.The increased subduction in the South Pacific reached(0.28±0.16)Sv-1 per year,which explains nearly 68%of the volume increase in the SPSAMW.This variability in the SPSAMW reflects alterations in the overlying atmosphere.The positive to negative phase change of the Interdecadal Pacific Oscillation(IPO)in 1980–2017 deepened the Amundsen Sea Low(ASL)via atmospheric teleconnections over the South Pacific.Further analysis reveals that the increased westerly winds during the deepening of ASL resulted in more cold water transport from the south,which deepened the winter mixed layer and thus increased subduction and volume within the SPSAMW subduction region.This finding suggests the association of the long-term trends of SPSAMW subduction and volume with the phase change of the IPO.
基金supported by the Doctoral Research Funds for Nanchang HangKong University,China(Grant No.EA202411211)support is gratefully acknowledged.
文摘This paper introduces a framework for modeling random fields,with a particular emphasis on analyzing anisotropic spatial variability.It establishes a clear connection between the correlation function and the Kriging variogram across various anisotropic modes,providing mathematical models to enhance our understanding of random fields.A new anisotropy index,called LSAI,is introduced to quantify anisotropy based on the autocorrelation length and the orientation of the principal axes within the variogram.An LSAI value closer to one indicates a lower degree of anisotropy.The present study examines how the degree of anisotropy varies with different autocorrelation lengths and angles between the principal axes,providing valuable insights into these relationships.To improve the accuracy of parameter probability distribution estimations,this study integrates limited field test data using a Bayesian inference approach.Additionally,the Markov chain Monte Carlo simulation method is employed to develop a conditional random field(CRF)for the deformation modulus.By incorporating data from field bearing plate tests,the posterior variance data for the deformation modulus are derived.This process facilitates the construction of a detailed and reliable CRF for the deformation modulus.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2342210 and 42275043)the National Institute of Natural Hazards,Ministry of Emergency Management of China(Grant Nos.J2223806,ZDJ2024-25 and ZDJ2025-34)。
文摘Climate models are essential for understanding past,present,and future changes in atmospheric circulation,with circulation modes providing key sources of seasonal predictability and prediction uncertainties for both global and regional climates.This study assesses the performance of models participating in phase 6 of the Coupled Model Intercomparison Project in simulating interannual variability modes of Northern Hemisphere 500-hPa geopotential height during winter and summer,distinguishing predictable(potentially predictable on seasonal or longer timescales)and unpredictable(intraseasonal and essentially unpredictable at long range)components,using reanalysis data and a variance decomposition method.Although most models effectively capture unpredictable modes in reanalysis,their ability to reproduce dominant predictable modes-specifically the Pacific-North American pattern,Arctic Oscillation,and Western Pacific Oscillation in winter,and the East Atlantic and North Atlantic Oscillations in summer-varies notably.An optimal ensemble is identified to distinguish(a)predictable-external modes,dominated by external forcing,and(b)predictable-internal modes,associated with slow internal variability,during the historical period(1950-2014)and the SSP5-8.5 scenario(2036-2100).Under increased radiative forcing,the leading winter/summer predictable-external mode exhibits a more uniform spatial distribution,remarkably larger trend and annual variance,and enhanced height-sea surface temperature(SST)covariance under SSP5-8.5 compared to historical conditions.The dominant winter/summer predictable-internal modes also exhibit increased variance and height-SST covariance under SSP5-8.5,along with localized changes in spatial configuration.Minimal changes are observed in spatial distribution or variance for dominant winter/summer unpredictable modes under SSP5-8.5.This study,from a predictive perspective,deepens our understanding of model uncertainties and projected changes in circulations.
基金Supported by National Natural Science Foundation of China(Grant Nos.52005039,51575043,51975048,U1764257).
文摘Mode shift is a special mechanism for a power-split hybrid electric vehicle(HEV)to realise electrically variable transmission,but the sudden change of equivalent inertia caused by topological configuration recombination during mode shift induces a significant torque shock.Therefore,a smooth transient process,among other concerns,typically associated with this category of vehicles,is of great importance.The present research aims to introduce a novel control strategy to manage the dynamic torque of multiple power sources and therefore im-prove ride comfort.To this end,a dynamic model of the objective power-split HEV is first built.To resolve the contention between vehicle jerk and clutch friction loss,a model predictive control(MPC)combined with control allocation(CA)is then designed for the clutch-engaged phase.To reduce the torque fluctuation caused by the inertia torques of multiple power sources,a dynamic compensation control strategy(DCcs)that coordinates motorgenerator torque to compensate for the transition torque is proposed for the brake-disengaged phase.Finally,the proposed control strategy is validated by simulation and bench test,and results show great potential in reducing shift duration,torque variation,vehicle jerk and friction loss(the simulation results show decreases of 22%,39%,83%and 53%,and the experimental results show decreases of 21%,74%,77%,and 59%,re-spectively),thereby improving shift quality.
基金supported by the Zhenjiang Key R&D Plan(GY2021009)Lianyungang City Major Technology Breakthrough(CGJBGS2104)+2 种基金National Natural Science Foundation of China under Grant(12302456)National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact under Grant(6142902241601)China Postdoctoral Science Foundation under Grants(2025M774217)。
文摘Flexible materials play a crucial role in protecting against behind armour blunt trauma(BABT).However,their compliance complicates the understanding of failure mechanisms and energy absorption.This study used a combined experimental and numerical approach to investigate the response and failure modes of a flexible ultra-high-molecular-weight polyethylene(UHMWPE)foam protective sandwich structure(UFPSS)under low-velocity impact(LVI).A finite element(FE)model,accounting for nonlinear large deformation and strain-rate-dependent material behavior,was developed for a woven-UFPSS(featuring a plain-woven fabric structure)subjected to a 50 J impact.Experimental and numerical results showed strong agreement in peak force(error<5%),maximum displacement(error<6%),and buffer time(error<8%).The impact's kinetic energy was mainly converted into internal energy of the fabric and foam materials(~50%),viscous dissipation in the foam core(12%-15%),frictional work at the contact interfaces(5%-6%),and work by the pneumatic fixture clamping force(~38%).This study provides the first investigation of the LVI performance of sandwich structures with all soft material layers,offering significant insights for the application of compliant materials in protective fields.
基金supported by the National Natural Science Foundation of China(62473337,62003305)the Key Research and Development Program of Zhejiang Province(2024C03040,2022C03029)the Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang Province(2023R01006)。
文摘In this paper,a unified terminal sliding mode(UTSM)control method is proposed for second-order nonlinear systems with uncertainties and disturbances.It is seen that the newly defined terminal sliding surface is integrated with both conventional and fast terminal sliding mode and exhibits design advantages such as a variable exponent,adjustable sliding mode parameters,and chattering-alleviation effect.The inherent dynamic properties of the closed-loop systems with the UTSM control are discussed in detail via the phase plane and Lyapunov stability theory.Both numerical simulations and experimental results show the flexible sliding manifold design,strong robustness against uncertain dynamics,and effective attenuation of chattering phenomenon.
基金supported in part by National Key Laboratory Foundation(No.STSL2024-A-04(C))。
文摘This paper proposes a trajectory tracking control scheme for vertical/short take-off and landing(V/STOL)vehicles.Owing to their high number of controllable degrees of freedom and strong nonlinearity,the design of flight control systems for such vehicles presents considerable challenges,particularly in developing controllers capable of accurately tracking specified trajectories.Building on existing control strategies for various vehicle types,this study introduces an extended control framework tailored for V/STOL systems.The proposed scheme consists of two nested loops:an outer position control loop and an inner attitude control loop.The position loop employs a proportional-integral-derivative(PID)control algorithm,whereas the attitude loop utilizes an anti-saturation integral sliding mode control algorithm.This approach effectively alleviates the integral oversaturation issue inherent in conventional sliding mode methods and suppresses buffeting through a boundary layer technique.Simulation results demonstrate the efficacy of the proposed control strategy.
基金funded by the National Natural Science Foundation of China,grant number U24A20135Inner Mongolia Natural Science Foundation major project,grant number 2023ZD12+7 种基金Inner Mongolia Autonomous Region key research and development and achievement transformation plan project,grant number 2023YFHH0090Natural Science Foundation of Inner Mongolia,grant number 2022MS05006Inner Mongolia Autonomous Region Talent Development FundUniversity basic research business expenses,grant number 2023RCTD012University basic research business expenses,grant number 2023QNJS075Postgraduate Research Innovation Program and of Inner Mongolia Autonomous Region,grant number KC2024053BUniversity basic research business expenses,grant number 2024YXXS012National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology,grant number GZ2023KF012.
文摘In dry-coupled ultrasonic thickness measurement,thick rubber layers introduce high-amplitude parasitic echoes that obscure defect signals and degrade thickness accuracy.Existing methods struggle to resolve overlap-ping echoes under variable coupling conditions and non-stationary noise.This study proposes a novel dual-criterion framework integrating energy contribution and statistical impulsivity metrics to isolate specimen re-flections from coupling-layer interference.By decomposing A-scan signals into Intrinsic Mode Functions(IMFs),the framework employs energy contribution thresholds(>85%)and kurtosis indices(>3)to autonomously select IMFs containing valid specimen echoes.Hybrid time-frequency thresholding further suppresses interference through amplitude filtering and spectral focusing.Experimental results demonstrate the framework’s robustness,achieving 92.3%thickness accuracy for 5 mm steel specimens with 5 mm rubber coupling,outperforming conventional methods by up to 18.7%.The dual-criterion approach reduces operator dependency by 37%and maintainsΔT<0.03 mm under surface roughness up to 6.3μm,offering a practical solution for industrial nondestructive testing with thick dry-coupled interfaces.
基金supported in part by Shanghai Natural Science Foundation(24ZR1454700)the National Natural Science Foundation of China(62503331,62533016,62573279,62173231,62203288)Shanghai Pujiang Program(23PJD033)。
文摘In this paper,a security defense issue is investigated for networked control systems susceptible to stochastic denial of service(DoS) attacks by using the sliding mode control method.To utilize network communication resources more effectively,a novel adaptive event-triggered(AET) mechanism is introduced,whose triggering coefficient can be adaptively adjusted according to the evolution trend of system states.Differing from existing event-triggered(ET) mechanisms,the proposed one demonstrates exceptional relevance and flexibility.It is closely related to attack probability,and its triggering coefficient dynamically adjusts depending on the presence or absence of an attack.To leverage attacker information more effectively,a switching-like sliding mode security controller is designed,which can autonomously select different controller gains based on the sliding function representing the attack situation.Sufficient conditions for the existence of the switching-like sliding mode secure controller are presented to ensure the stochastic stability of the system and the reachability of the sliding surface.Compared with existing time-invariant control strategies within the triggered interval,more resilient defense performance can be expected since the correlation with attack information is established in both the proposed AET scheme and the control strategy.Finally,a simulation example is conducted to verify the effectiveness and feasibility of the proposed security control method.
基金The National Key R＆D Program of China (2017YFC1502903) Sichuan International Cooperation and Exchange for Science and Technology (2016HH0079)+1 种基金 ＂Novel methodologies for the assessment of risk of ground displacement＂ under ESPA 2007-2013 of Greece under
文摘A multi-block model and a corresponding computer program have been developed which predict the kinematics of landslides.Furthermore,a unique event for studying different models simulating the triggering and movement of landslides is the 2008Wenchuan earthquake in the mountainous region in Sichuan Province of China,which caused a large number of rapid landslides.The purpose of the paper is two-fold:(a)to propose and incorporate into the multi-block model constitutive relations predicting soil response along slip surfaces,and(b)to apply the multi-block model with the constitutive relations at landslides triggered by the Wenchuan earthquake.The proposed constitutive equations predict the shape of the shear stress-displacement response measured in ring shear tests.In the application,four landslides caused by the Wenchuan earthquake were considered.Only in one of these landslides the shear resistance-displacement response along the slip surface has been measured in laboratory tests.At this landslide,the triggering and movement of the landslide was predicted.In the other landslides,back analyses were performed and it was observed that the multi-block model predicted reasonably well the final configuration of all slides.In addition,as the measured and back-estimated total friction angle of all landslides was less than 180,and the materials along the slip surface were sandy,it is inferred that some,or all of the slip surface during these slides was sheared in an undrained manner and excess pore pressures generated during sliding played a key role in the triggering and movement of these landslides.Concluding,the paper(A)proposed and validated a multi-block constitutive model which can be applied to predict the triggering and movement of earthquake-induced slides and(B)by analyzing four landslides of the 2008 Wenchuan earthquake,it concludes that some,or all of the slip surface during these slides,was sheared in an undrained manner and excess pore pressures generated during sliding played a key role in the triggering and movement of these landslides.
文摘In order to analyze the hydrodynamic performance of the ducted propeller with high precision, this paper proposes a new method which combines Multi-Block Hybrid Mesh and Reynolds Stress Model (MBHM & RSM). The calculation errors of MBHM & RSM and standard two-equation model (standard k-ε model) on the ducted propeller JD7704 +Ka4-55 are compared. The maximum error of the total thrust coefficient KT, the duct thrust coefficient KTN, the torque coefficient KQ and the open-water efficiency η0 of MBHM & RSM are 2.98%, 4.01%, 1.46%, and 0.89%, respectively, which are lower than those of standard k-ε model. Indeed, the pressure distribution on the propeller surfaces, the pressure and the velocity vector distribution of the flow field are also analyzed, which are consistent with the theory. It is demonstrated that MBHM & RSM on the thruster dynamics analysis are feasible. This paper provides reference in the thruster designing of underwater robot.
文摘In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.
基金Supported by the National Hi-Tech Research & Devel-opment Plan of China (863 Project) (No.2003AA143040) and Jiangsu Provincial Key Laboratory of Network & Information Security (No.BM2003201).
文摘A fast authentication mode based on Multi-Block Chaining (MBC) is put forward; and its security is proved. The MBC mode is for new generation block cipher algorithms. Its speed is about 13% faster than that of the authentication modes in common use (for example, cipher block chaining-message authentication code mode). The dependence test results meet the requirement. The MBC mode is complete; its degree of ava-lanche effect is about 0.9993; its degree of strict avalanche criterion is 0.992 or so. The frequency test results indicate that the output generated by the MBC mode has uniformity. The binary matrix rank test results imply that it is linear independent among disjoint sub-matrices of the output. Maurer’s universal statistical test results show that the output could be significantly compressed without loss of information. Run test, spectral test, non-overlapping template matching test, overlapping template matching test, Lempel-Ziv compression test, linear complexity test, serial test, approximate entropy test, cumulative sums test, random excursions test and random excursions variant test results fulfill the requirements of all. Therefore the MBC mode has good pseudo-randomness. Thus the security of MBC mode is verified by the way of statistical evaluation.
