Landslides are one of the most disastrous geological hazards in southwestern China.Once a landslide becomes unstable,it threatens the lives and safety of local residents.However,empirical studies on landslides have pr...Landslides are one of the most disastrous geological hazards in southwestern China.Once a landslide becomes unstable,it threatens the lives and safety of local residents.However,empirical studies on landslides have predominantly focused on landslides that occur on land.To this end,we aim to investigate ashore and underwater landslide data synchronously.This study proposes an optimized mosaicking method for ashore and underwater landslide data.This method fuses an airborne laser point cloud with multi-beam depth sounder images.Owing to their relatively high efficiency and large coverage area,airborne laser measurement systems are suitable for emergency investigations of landslides.Based on the airborne laser point cloud,the traversal of the point with the lowest elevation value in the point set can be used to perform rapid extraction of the crude channel boundaries.Further meticulous extraction of the channel boundaries is then implemented using the probability mean value optimization method.In addition,synthesis of the integrated ashore and underwater landslide data angle is realized using the spatial guide line between the channel boundaries and the underwater multibeam sonar images.A landslide located on the right bank of the middle reaches of the Yalong River is selected as a case study to demonstrate that the proposed method has higher precision thantraditional methods.The experimental results show that the mosaicking method in this study can meet the basic needs of landslide modeling and provide a basis for qualitative and quantitative analysis and stability prediction of landslides.展开更多
Multi-beam Sonar and Side-scan Sonar compensate each other. In order to fully utilize all information, it is necessary to fuse two kinds of image and data. And the image co-registration is an important and complicated...Multi-beam Sonar and Side-scan Sonar compensate each other. In order to fully utilize all information, it is necessary to fuse two kinds of image and data. And the image co-registration is an important and complicated job before fusion. This paper suggests combining bathymetric data with intensity image, obtaining the characteristic points through the minimal angles of lines, and then deciding the corresponding image points by the maximal correlate coefficient in searching space. Finally, the second order polynomial is applied to the deformation model. After the images have been co-registered, Wavelet is used to fuse the images. It is shown that this algorithm can be used in the flat seafloor or the isotropic seabed. Verification is made in the paper with the observed data.展开更多
In the task of inspecting underwater suspended pipelines,multi-beam sonar(MBS)can provide two-dimensional water column images(WCIs).However,systematic interferences(e.g.,sidelobe effects)may induce misdetection in WCI...In the task of inspecting underwater suspended pipelines,multi-beam sonar(MBS)can provide two-dimensional water column images(WCIs).However,systematic interferences(e.g.,sidelobe effects)may induce misdetection in WCIs.To address this issue and improve the accuracy of detection,we developed a density-based clustering method for three-dimensional water column point clouds.During the processing of WCIs,sidelobe effects are mitigated using a bilateral filter and brightness transformation.The cross-sectional point cloud of the pipeline is then extracted by using the Canny operator.In the detection phase,the target is identified by using density-based spatial clustering of applications with noise(DBSCAN).However,the selection of appropriate DBSCAN parameters is obscured by the uneven distribution of the water column point cloud.To overcome this,we propose an improved DBSCAN based on a parameter interval estimation method(PIE-DBSCAN).First,kernel density estimation(KDE)is used to determine the candidate interval of parameters,after which the exact cluster number is determined via density peak clustering(DPC).Finally,the optimal parameters are selected by comparing the mean silhouette coefficients.To validate the performance of PIE-DBSCAN,we collected water column point clouds from an anechoic tank and the South China Sea.PIE-DBSCAN successfully detected both the target points of the suspended pipeline and non-target points on the seafloor surface.Compared to the K-Means and Mean-Shift algorithms,PIE-DBSCAN demonstrates superior clustering performance and shows feasibility in practical applications.展开更多
The spatial matrix filter was designed and used for solving the problem to detect a weak target who was influenced by the strong nearby platform noise interference of the towed line array sonar. The MFP technology and...The spatial matrix filter was designed and used for solving the problem to detect a weak target who was influenced by the strong nearby platform noise interference of the towed line array sonar. The MFP technology and the DOA estimation technology were combined together by using the sound propagation characteristics of both target and interference. The spatial matrix filter with platform noise zero response constraint was designed by the near-field platform noise normal modes copy vectors and the far-field plane wave bearing vectors together. The optimal solution of the optimization problem for designing the spatial matrix filter was deduced directly, and it was simplified by the generalized singular value decomposition. The total response error to the plane wave bearing vectors and the total response to the platform noise copy vectors were given. The phenomena that strong interferences existed in the bearing course and blind areas existed after filtering were analyzed by the correlation between the plat- form noise copy vectors and the plane wave bearing vectors. It could be found from simulations that it has less blind area and higher detection ability by using the spatial matrix filtering technology.展开更多
Medical ultrasound,developed after World War II,emerged from the application of sonar technology originally used for submarine detection during the 1950s.In the early stages of this development,the concept of transrec...Medical ultrasound,developed after World War II,emerged from the application of sonar technology originally used for submarine detection during the 1950s.In the early stages of this development,the concept of transrectal ultrasound(TRUS)was proposed.In 1955,Wild and Reid in the United States developed a basic transrectal scanner,but it could only display the rectal mucosa which lacked diagnostic value.展开更多
基金supported in part by the National Key R&D Program of China(Grant no.2016YFC0401908)。
文摘Landslides are one of the most disastrous geological hazards in southwestern China.Once a landslide becomes unstable,it threatens the lives and safety of local residents.However,empirical studies on landslides have predominantly focused on landslides that occur on land.To this end,we aim to investigate ashore and underwater landslide data synchronously.This study proposes an optimized mosaicking method for ashore and underwater landslide data.This method fuses an airborne laser point cloud with multi-beam depth sounder images.Owing to their relatively high efficiency and large coverage area,airborne laser measurement systems are suitable for emergency investigations of landslides.Based on the airborne laser point cloud,the traversal of the point with the lowest elevation value in the point set can be used to perform rapid extraction of the crude channel boundaries.Further meticulous extraction of the channel boundaries is then implemented using the probability mean value optimization method.In addition,synthesis of the integrated ashore and underwater landslide data angle is realized using the spatial guide line between the channel boundaries and the underwater multibeam sonar images.A landslide located on the right bank of the middle reaches of the Yalong River is selected as a case study to demonstrate that the proposed method has higher precision thantraditional methods.The experimental results show that the mosaicking method in this study can meet the basic needs of landslide modeling and provide a basis for qualitative and quantitative analysis and stability prediction of landslides.
文摘Multi-beam Sonar and Side-scan Sonar compensate each other. In order to fully utilize all information, it is necessary to fuse two kinds of image and data. And the image co-registration is an important and complicated job before fusion. This paper suggests combining bathymetric data with intensity image, obtaining the characteristic points through the minimal angles of lines, and then deciding the corresponding image points by the maximal correlate coefficient in searching space. Finally, the second order polynomial is applied to the deformation model. After the images have been co-registered, Wavelet is used to fuse the images. It is shown that this algorithm can be used in the flat seafloor or the isotropic seabed. Verification is made in the paper with the observed data.
基金the National Natural Science Foundation of China(Nos.42176188,42176192)the Hainan Provincial Natural Science Foundation of China(No.421CXTD442)+2 种基金the Stable Supporting Fund of Acoustic Science and Technology Laboratory(No.JCKYS2024604SSJS007)the Fundamental Research Funds for the Central Universities(No.3072024CFJ0504)the Harbin Engineering University Doctoral Research and Innovation Fund(No.XK2050021034)。
文摘In the task of inspecting underwater suspended pipelines,multi-beam sonar(MBS)can provide two-dimensional water column images(WCIs).However,systematic interferences(e.g.,sidelobe effects)may induce misdetection in WCIs.To address this issue and improve the accuracy of detection,we developed a density-based clustering method for three-dimensional water column point clouds.During the processing of WCIs,sidelobe effects are mitigated using a bilateral filter and brightness transformation.The cross-sectional point cloud of the pipeline is then extracted by using the Canny operator.In the detection phase,the target is identified by using density-based spatial clustering of applications with noise(DBSCAN).However,the selection of appropriate DBSCAN parameters is obscured by the uneven distribution of the water column point cloud.To overcome this,we propose an improved DBSCAN based on a parameter interval estimation method(PIE-DBSCAN).First,kernel density estimation(KDE)is used to determine the candidate interval of parameters,after which the exact cluster number is determined via density peak clustering(DPC).Finally,the optimal parameters are selected by comparing the mean silhouette coefficients.To validate the performance of PIE-DBSCAN,we collected water column point clouds from an anechoic tank and the South China Sea.PIE-DBSCAN successfully detected both the target points of the suspended pipeline and non-target points on the seafloor surface.Compared to the K-Means and Mean-Shift algorithms,PIE-DBSCAN demonstrates superior clustering performance and shows feasibility in practical applications.
基金supported by the National Natural Science Foundation of China(60532040,11374001)
文摘The spatial matrix filter was designed and used for solving the problem to detect a weak target who was influenced by the strong nearby platform noise interference of the towed line array sonar. The MFP technology and the DOA estimation technology were combined together by using the sound propagation characteristics of both target and interference. The spatial matrix filter with platform noise zero response constraint was designed by the near-field platform noise normal modes copy vectors and the far-field plane wave bearing vectors together. The optimal solution of the optimization problem for designing the spatial matrix filter was deduced directly, and it was simplified by the generalized singular value decomposition. The total response error to the plane wave bearing vectors and the total response to the platform noise copy vectors were given. The phenomena that strong interferences existed in the bearing course and blind areas existed after filtering were analyzed by the correlation between the plat- form noise copy vectors and the plane wave bearing vectors. It could be found from simulations that it has less blind area and higher detection ability by using the spatial matrix filtering technology.
文摘Medical ultrasound,developed after World War II,emerged from the application of sonar technology originally used for submarine detection during the 1950s.In the early stages of this development,the concept of transrectal ultrasound(TRUS)was proposed.In 1955,Wild and Reid in the United States developed a basic transrectal scanner,but it could only display the rectal mucosa which lacked diagnostic value.
