Lead(Pb)plays a significant role in the nuclear industry and is extensively used in radiation shielding,radiation protection,neutron moderation,radiation measurements,and various other critical functions.Consequently,...Lead(Pb)plays a significant role in the nuclear industry and is extensively used in radiation shielding,radiation protection,neutron moderation,radiation measurements,and various other critical functions.Consequently,the measurement and evaluation of Pb nuclear data are highly regarded in nuclear scientific research,emphasizing its crucial role in the field.Using the time-of-flight(ToF)method,the neutron leakage spectra from three^(nat)Pb samples were measured at 60°and 120°based on the neutronics integral experimental facility at the China Institute of Atomic Energy(CIAE).The^(nat)Pb sample sizes were30 cm×30 cm×5 cm,30 cm×30 cm×10 cm,and 30 cm×30 cm×15 cm.Neutron sources were generated by the Cockcroft-Walton accelerator,producing approximately 14.5 MeV and 3.5 MeV neutrons through the T(d,n)^(4)He and D(d,n)^(3)He reactions,respectively.Leakage neutron spectra were also calculated by employing the Monte Carlo code of MCNP-4C,and the nuclear data of Pb isotopes from four libraries:CENDL-3.2,JEFF-3.3,JENDL-5,and ENDF/B-Ⅷ.0 were used individually.By comparing the simulation and experimental results,improvements and deficiencies in the evaluated nuclear data of the Pb isotopes were analyzed.Most of the calculated results were consistent with the experimental results;however,a few areas did not fit well.In the(n,el)energy range,the simulated results from CENDL-3.2 were significantly overestimated;in the(n,inl)D and the(n,inl)C energy regions,the results from CENDL-3.2 and ENDF/B-Ⅷ.0 were significantly overestimated at 120°,and the results from JENDL-5 and JEFF-3.3 are underestimated at 60°in the(n,inl)D energy region.The calculated spectra were analyzed by comparing them with the experimental spectra in terms of the neutron spectrum shape and C/E values.The results indicate that the theoretical simulations,using different data libraries,overestimated or underestimated the measured values in certain energy ranges.Secondary neutron energies and angular distributions in the data files have been presented to explain these discrepancies.展开更多
To construct mediators for data integration systems that integrate structured and semi-structured data, and to facilitate the reformulation and decomposition of the query, the presented system uses the XML processing ...To construct mediators for data integration systems that integrate structured and semi-structured data, and to facilitate the reformulation and decomposition of the query, the presented system uses the XML processing language (XPL) for the mediator. With XPL, it is easy to construct mediators for data integration based on XML, and it can accelerate the work in the mediator.展开更多
We propose a three-step technique to achieve this purpose. First, we utilize a collection of XML namespaces organized into hierarchical structure as a medium for expressing data semantics. Second, we define the format...We propose a three-step technique to achieve this purpose. First, we utilize a collection of XML namespaces organized into hierarchical structure as a medium for expressing data semantics. Second, we define the format of resource descriptor for the information source discovery scheme so that we can dynamically register and/or deregister the Web data sources on the fly. Third, we employ an inverted-index mechanism to identify the subset of information sources that are relevant to a particular user query. We describe the design, architecture, and implementation of our approach—IWDS, and illustrate its use through case examples. Key words integration - heterogeneity - Web data source - XML namespace CLC number TP 311.13 Foundation item: Supported by the National Key Technologies R&D Program of China(2002BA103A04)Biography: WU Wei (1975-), male, Ph.D candidate, research direction: information integration, distribute computing展开更多
Beryllium(^(9)Be)serves as a crucial neutron multiplier and reflection material,being extensively employed in the nuclear industry.The evaluated nuclear data are utilized in the design of the nuclear devices.Following...Beryllium(^(9)Be)serves as a crucial neutron multiplier and reflection material,being extensively employed in the nuclear industry.The evaluated nuclear data are utilized in the design of the nuclear devices.Following the interaction between neutrons and^(9)Be,all neutrons generated stem from the^(9)Be(n,2n)^(8)Be reaction channel,except for the elastic scattering reaction channel.Nevertheless,the data of the outgoing neutron double differential cross section of the reaction channel provided by the latest internationally evaluated libraries still exhibit considerable discrepancies.A shielding integral experiment based on slab^(9)Be samples with measurements of neutron spectra leaked from different angles is an effective approach to verify the double differential cross-section data.Hence,in this study,a shielding integral experiment of^(9)Be samples of different thicknesses was conducted using a nanosecond pulsed deuterium-tritium neutron source established by the China Institute of Atomic Energy.The neutron time-of-flight spectra of three thicknesses(4.4 cm,8.8 cm,and 13.2 cm)and six angles(47°,58°,73°,107°,122°,and 133°)were measured by the neutron time-of-flight method,and 18 sets of experimental data were obtained.Additionally,the MCNP-4C program was used to obtain the simulated results of the leakage neutron spectra using the evaluated nuclear data of^(9)Be from the CENDL-3.2,ENDF/B-Ⅷ.0,JENDL-5,and JEFF-3.3 libraries.The simulated results of the leakage neutron spectra were compared with the experimental results,and the results showed that in the elastic scattering energy region,the simulated results from the CENDL-3.2,ENDF/B-Ⅷ.0,and JENDL-5 libraries were slightly higher at small angles and slightly lower at large angles.In the(n,2n)energy region,the simulated results from the CENDL-3.2 library were significantly different from the experimental results in terms of spectral shape,and the simulated results from the ENDF/B-Ⅷ.0 and the JENDL-5 libraries were in good agreement with the experimental results at small angles but low at large angles.The simulated results from the JEFF-3.3 library showed serious underestimation at all angles.展开更多
The Digital Elevation Model(DEM)data of debris flow prevention engineering are the boundary of a debris flow prevention simulation,which provides accurate and reliable DEM data and is a key consideration in debris flo...The Digital Elevation Model(DEM)data of debris flow prevention engineering are the boundary of a debris flow prevention simulation,which provides accurate and reliable DEM data and is a key consideration in debris flow prevention simulations.Thus,this paper proposes a multi-source data fusion method.First,we constructed 3D models of debris flow prevention using virtual reality technology according to the relevant specifications.The 3D spatial data generated by 3D modeling were converted into DEM data for debris flow prevention engineering.Then,the accuracy and applicability of the DEM data were verified by the error analysis testing and fusion testing of the debris flow prevention simulation.Finally,we propose the Levels of Detail algorithm based on the quadtree structure to realize the visualization of a large-scale disaster prevention scene.The test results reveal that the data fusion method controlled the error rate of the DEM data of the debris flow prevention engineering within an allowable range and generated 3D volume data(obj format)to compensate for the deficiency of the DEM data whereby the 3D internal entity space is not expressed.Additionally,the levels of detailed method can dispatch the data of a large-scale debris flow hazard scene in real time to ensure a realistic 3D visualization.In summary,the proposed methods can be applied to the planning of debris flow prevention engineering and to the simulation of the debris flow prevention process.展开更多
In order to estimate vehicular queue length at signalized intersections accurately and overcome the shortcomings and restrictions of existing studies especially those based on shockwave theory,a new methodology is pre...In order to estimate vehicular queue length at signalized intersections accurately and overcome the shortcomings and restrictions of existing studies especially those based on shockwave theory,a new methodology is presented for estimating vehicular queue length using data from both point detectors and probe vehicles. The methodology applies the shockwave theory to model queue evolution over time and space. Using probe vehicle locations and times as well as point detector measured traffic states,analytical formulations for calculating the maximum and minimum( residual) queue length are developed. The proposed methodology is verified using ground truth data collected from numerical experiments conducted in Shanghai,China. It is found that the methodology has a mean absolute percentage error of 17. 09%,which is reasonably effective in estimating the queue length at traffic signalized intersections. Limitations of the proposed models and algorithms are also discussed in the paper.展开更多
MORPAS is a special GIS (geographic information system) software system, based on the MAPGIS platform whose aim is to prospect and evaluate mineral resources quantificationally by synthesizing geological, geophysical,...MORPAS is a special GIS (geographic information system) software system, based on the MAPGIS platform whose aim is to prospect and evaluate mineral resources quantificationally by synthesizing geological, geophysical, geochemical and remote sensing data. It overlays geological database management, geological background and geological abnormality analysis, image processing of remote sensing and comprehensive abnormality analysis, etc.. It puts forward an integrative solution for the application of GIS in basic-level units and the construction of information engineering in the geological field. As the popularization of computer networks and the request of data sharing, it is necessary to extend its functions in data management so that all its data files can be accessed in the network server. This paper utilizes some MAPGIS functions for the second development and ADO (access data object) technique to access multi-source geological data in SQL Server databases. Then remote visiting and congruous management will be realized in the MORPAS system.展开更多
The geological data are constructed in vector format in geographical information system (GIS) while other data such as remote sensing images, geographical data and geochemical data are saved in raster ones. This paper...The geological data are constructed in vector format in geographical information system (GIS) while other data such as remote sensing images, geographical data and geochemical data are saved in raster ones. This paper converts the vector data into 8 bit images according to their importance to mineralization each by programming. We can communicate the geological meaning with the raster images by this method. The paper also fuses geographical data and geochemical data with the programmed strata data. The result shows that image fusion can express different intensities effectively and visualize the structure characters in 2 dimensions. Furthermore, it also can produce optimized information from multi-source data and express them more directly.展开更多
The Multi-source spatial data distribution is based on WebGIS, and it is an important part of multi-source geographic information management system. a new multi-source spatial data distribution model is proposed on th...The Multi-source spatial data distribution is based on WebGIS, and it is an important part of multi-source geographic information management system. a new multi-source spatial data distribution model is proposed on the basis of multisource data storage model and by combining existing map distribution technology, The author developed a multi-source spatial data distribution system which based on MapGIS K9 by using this model and taking full advantage of interfacecode separating thinking and high efficiency characteristic of .net, so high-speed distribution of multi-source spatial data realized.展开更多
[Objective] The aim was to extract red tide information in Haizhou Bay on the basis of multi-source remote sensing data.[Method] Red tide in Haizhou Bay was studied based on multi-source remote sensing data,such as IR...[Objective] The aim was to extract red tide information in Haizhou Bay on the basis of multi-source remote sensing data.[Method] Red tide in Haizhou Bay was studied based on multi-source remote sensing data,such as IRS-P6 data on October 8,2005,Landsat 5-TM data on May 20,2006,MODIS 1B data on October 6,2006 and HY-1B second-grade data on April 22,2009,which were firstly preprocessed through geometric correction,atmospheric correction,image resizing and so on.At the same time,the synchronous environment monitoring data of red tide water were acquired.Then,band ratio method,chlorophyll-a concentration method and secondary filtering method were adopted to extract red tide information.[Result] On October 8,2005,the area of red tide was about 20.0 km2 in Haizhou Bay.There was no red tide in Haizhou bay on May 20,2006.On October 6,2006,large areas of red tide occurred in Haizhou bay,with area of 436.5 km2.On April 22,2009,red tide scattered in Haizhou bay,and its area was about 10.8 km2.[Conclusion] The research would provide technical ideas for the environmental monitoring department of Lianyungang to implement red tide forecast and warning effectively.展开更多
This paper analyzes the status of existing resources through extensive research and international cooperation on the basis of four typical global monthly surface temperature datasets including the climate research dat...This paper analyzes the status of existing resources through extensive research and international cooperation on the basis of four typical global monthly surface temperature datasets including the climate research dataset of the University of East Anglia(CRUTEM3), the dataset of the U.S. National Climatic Data Center(GHCN-V3), the dataset of the U.S. National Aeronautics and Space Administration(GISSTMP), and the Berkeley Earth surface temperature dataset(Berkeley). China's first global monthly temperature dataset over land was developed by integrating the four aforementioned global temperature datasets and several regional datasets from major countries or regions. This dataset contains information from 9,519 stations worldwide of at least 20 years for monthly mean temperature, 7,073 for maximum temperature, and 6,587 for minimum temperature. Compared with CRUTEM3 and GHCN-V3, the station density is much higher particularly for South America, Africa,and Asia. Moreover, data from significantly more stations were available after the year 1990 which dramatically reduced the uncertainty of the estimated global temperature trend during 1990e2011. The integrated dataset can serve as a reliable data source for global climate change research.展开更多
The majority of academic researchers present the results of their scientific activity on the Web. This trace can be used to derive useful information of their past, present activity and forecast the future intentions....The majority of academic researchers present the results of their scientific activity on the Web. This trace can be used to derive useful information of their past, present activity and forecast the future intentions. Hence, social network of academic researchers can be of important value for scientific community. This information can be retrieved from various data source currently available on the Web. From each of them a separate net-work can be built. In this paper we present a method which can be used to combine multiple single-relational networks into a single network which will combine all relations, hence it will be multi-relational.展开更多
Snow depth （SD） is a key parameter for research into global climate changes and land surface processes. A method was developed to obtain daily SD images at a higher 4 km spatial resolution and higher precision with ...Snow depth （SD） is a key parameter for research into global climate changes and land surface processes. A method was developed to obtain daily SD images at a higher 4 km spatial resolution and higher precision with SD measurements from in situ observations and passive microwave remote sensing of Advanced Microwave Scanning Radiometer-EOS （AMSR-E） and snow cover measurements of the Interactive Multisensor Snow and Ice Mapping System （IMS）. AMSR-E SD at 25 km spatial resolution was retrieved from AMSR-E products of snow density and snow water equivalent and then corrected using the SD from in situ observations and IMS snow cover. Corrected AMSR-E SD images were then resampled to act as ＂virtual＂ in situ observations to combine with the real in situ observations to interpolate at 4 km spatial resolution SD using the Cressman method. Finally, daily SD data generation for several regions of China demonstrated that the method is well suited to the generation of higher spatial resolution SD data in regions with a lower Digital Elevation Model （DEM） but not so well suited to regions at high altitude and with an undulating terrain, such as the Tibetan Plateau. Analysis of the longer time period SD data generation for January between 2003 and 2010 in northern Xinjiang also demonstrated the feasibility of the method.展开更多
An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, clo...An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.展开更多
taking the bucket of multi function earth drill as an example, combining with the conception of multi sensor integration and data fusion, adopting the terrene column chart and digging torque formula as control depende...taking the bucket of multi function earth drill as an example, combining with the conception of multi sensor integration and data fusion, adopting the terrene column chart and digging torque formula as control dependence, the detecting method of the earth drill’s working state is introduced. Multi sensor data fusion is done with the aid of BP neural network in Matlab. The data to be interfused are pre processed and the program of simulation and “point checking” is given.展开更多
The present paper deals with very important practical problems of wide range of applications. The main target of the present paper is to track all moving boundaries that appear throughout the whole process when dealin...The present paper deals with very important practical problems of wide range of applications. The main target of the present paper is to track all moving boundaries that appear throughout the whole process when dealing with multi-moving boundary problems continuously with time up to the end of the process with high accuracy and minimum number of iterations. A new numerical iterative scheme based the boundary integral equation method is developed to track the moving boundaries as well as compute all unknowns in the problem. Three practical applications, one for vaporization and two for ablation were solved and their results were compared with finite element, heat balance integral and the source and sink results and a good agreement were obtained.展开更多
Over the past decade, open-source software use has grown. Today, many companies including Google, Microsoft, Meta, RedHat, MongoDB, and Apache are major participants of open-source contributions. With the increased us...Over the past decade, open-source software use has grown. Today, many companies including Google, Microsoft, Meta, RedHat, MongoDB, and Apache are major participants of open-source contributions. With the increased use of open-source software or integration of open-source software into custom-developed software, the quality of this software component increases in importance. This study examined a sample of open-source applications from GitHub. Static software analytics were conducted, and each application was classified for its risk level. In the analyzed applications, it was found that 90% of the applications were classified as low risk or moderate low risk indicating a high level of quality for open-source applications.展开更多
基金supported by the National Natural Science Foundation of China(Nos.11775311 and U2067205)the Stable Support Basic Research Program Grant(BJ010261223282)the Research and Development Project of China National Nuclear Corporation。
文摘Lead(Pb)plays a significant role in the nuclear industry and is extensively used in radiation shielding,radiation protection,neutron moderation,radiation measurements,and various other critical functions.Consequently,the measurement and evaluation of Pb nuclear data are highly regarded in nuclear scientific research,emphasizing its crucial role in the field.Using the time-of-flight(ToF)method,the neutron leakage spectra from three^(nat)Pb samples were measured at 60°and 120°based on the neutronics integral experimental facility at the China Institute of Atomic Energy(CIAE).The^(nat)Pb sample sizes were30 cm×30 cm×5 cm,30 cm×30 cm×10 cm,and 30 cm×30 cm×15 cm.Neutron sources were generated by the Cockcroft-Walton accelerator,producing approximately 14.5 MeV and 3.5 MeV neutrons through the T(d,n)^(4)He and D(d,n)^(3)He reactions,respectively.Leakage neutron spectra were also calculated by employing the Monte Carlo code of MCNP-4C,and the nuclear data of Pb isotopes from four libraries:CENDL-3.2,JEFF-3.3,JENDL-5,and ENDF/B-Ⅷ.0 were used individually.By comparing the simulation and experimental results,improvements and deficiencies in the evaluated nuclear data of the Pb isotopes were analyzed.Most of the calculated results were consistent with the experimental results;however,a few areas did not fit well.In the(n,el)energy range,the simulated results from CENDL-3.2 were significantly overestimated;in the(n,inl)D and the(n,inl)C energy regions,the results from CENDL-3.2 and ENDF/B-Ⅷ.0 were significantly overestimated at 120°,and the results from JENDL-5 and JEFF-3.3 are underestimated at 60°in the(n,inl)D energy region.The calculated spectra were analyzed by comparing them with the experimental spectra in terms of the neutron spectrum shape and C/E values.The results indicate that the theoretical simulations,using different data libraries,overestimated or underestimated the measured values in certain energy ranges.Secondary neutron energies and angular distributions in the data files have been presented to explain these discrepancies.
文摘To construct mediators for data integration systems that integrate structured and semi-structured data, and to facilitate the reformulation and decomposition of the query, the presented system uses the XML processing language (XPL) for the mediator. With XPL, it is easy to construct mediators for data integration based on XML, and it can accelerate the work in the mediator.
文摘We propose a three-step technique to achieve this purpose. First, we utilize a collection of XML namespaces organized into hierarchical structure as a medium for expressing data semantics. Second, we define the format of resource descriptor for the information source discovery scheme so that we can dynamically register and/or deregister the Web data sources on the fly. Third, we employ an inverted-index mechanism to identify the subset of information sources that are relevant to a particular user query. We describe the design, architecture, and implementation of our approach—IWDS, and illustrate its use through case examples. Key words integration - heterogeneity - Web data source - XML namespace CLC number TP 311.13 Foundation item: Supported by the National Key Technologies R&D Program of China(2002BA103A04)Biography: WU Wei (1975-), male, Ph.D candidate, research direction: information integration, distribute computing
基金supported by the National Natural Science Foundation of China(Nos.11775311,U2167203,U2067205 and 12075105)Research and development project of China National Nuclear Corporation(FD010241222552)+2 种基金Continuous-Support Basic Scientific Research Project(BJ010261223282)Major Science and Technology Projects of Gansu Province(22ZD6GB020)Fundamental Research Funds for the Central Universities(lzujbky-2024-jdzx10)。
文摘Beryllium(^(9)Be)serves as a crucial neutron multiplier and reflection material,being extensively employed in the nuclear industry.The evaluated nuclear data are utilized in the design of the nuclear devices.Following the interaction between neutrons and^(9)Be,all neutrons generated stem from the^(9)Be(n,2n)^(8)Be reaction channel,except for the elastic scattering reaction channel.Nevertheless,the data of the outgoing neutron double differential cross section of the reaction channel provided by the latest internationally evaluated libraries still exhibit considerable discrepancies.A shielding integral experiment based on slab^(9)Be samples with measurements of neutron spectra leaked from different angles is an effective approach to verify the double differential cross-section data.Hence,in this study,a shielding integral experiment of^(9)Be samples of different thicknesses was conducted using a nanosecond pulsed deuterium-tritium neutron source established by the China Institute of Atomic Energy.The neutron time-of-flight spectra of three thicknesses(4.4 cm,8.8 cm,and 13.2 cm)and six angles(47°,58°,73°,107°,122°,and 133°)were measured by the neutron time-of-flight method,and 18 sets of experimental data were obtained.Additionally,the MCNP-4C program was used to obtain the simulated results of the leakage neutron spectra using the evaluated nuclear data of^(9)Be from the CENDL-3.2,ENDF/B-Ⅷ.0,JENDL-5,and JEFF-3.3 libraries.The simulated results of the leakage neutron spectra were compared with the experimental results,and the results showed that in the elastic scattering energy region,the simulated results from the CENDL-3.2,ENDF/B-Ⅷ.0,and JENDL-5 libraries were slightly higher at small angles and slightly lower at large angles.In the(n,2n)energy region,the simulated results from the CENDL-3.2 library were significantly different from the experimental results in terms of spectral shape,and the simulated results from the ENDF/B-Ⅷ.0 and the JENDL-5 libraries were in good agreement with the experimental results at small angles but low at large angles.The simulated results from the JEFF-3.3 library showed serious underestimation at all angles.
基金support provided by the National Natural Sciences Foundation of China(No.41771419)Student Research Training Program of Southwest Jiaotong University(No.191510,No.182117)。
文摘The Digital Elevation Model(DEM)data of debris flow prevention engineering are the boundary of a debris flow prevention simulation,which provides accurate and reliable DEM data and is a key consideration in debris flow prevention simulations.Thus,this paper proposes a multi-source data fusion method.First,we constructed 3D models of debris flow prevention using virtual reality technology according to the relevant specifications.The 3D spatial data generated by 3D modeling were converted into DEM data for debris flow prevention engineering.Then,the accuracy and applicability of the DEM data were verified by the error analysis testing and fusion testing of the debris flow prevention simulation.Finally,we propose the Levels of Detail algorithm based on the quadtree structure to realize the visualization of a large-scale disaster prevention scene.The test results reveal that the data fusion method controlled the error rate of the DEM data of the debris flow prevention engineering within an allowable range and generated 3D volume data(obj format)to compensate for the deficiency of the DEM data whereby the 3D internal entity space is not expressed.Additionally,the levels of detailed method can dispatch the data of a large-scale debris flow hazard scene in real time to ensure a realistic 3D visualization.In summary,the proposed methods can be applied to the planning of debris flow prevention engineering and to the simulation of the debris flow prevention process.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51138003)
文摘In order to estimate vehicular queue length at signalized intersections accurately and overcome the shortcomings and restrictions of existing studies especially those based on shockwave theory,a new methodology is presented for estimating vehicular queue length using data from both point detectors and probe vehicles. The methodology applies the shockwave theory to model queue evolution over time and space. Using probe vehicle locations and times as well as point detector measured traffic states,analytical formulations for calculating the maximum and minimum( residual) queue length are developed. The proposed methodology is verified using ground truth data collected from numerical experiments conducted in Shanghai,China. It is found that the methodology has a mean absolute percentage error of 17. 09%,which is reasonably effective in estimating the queue length at traffic signalized intersections. Limitations of the proposed models and algorithms are also discussed in the paper.
文摘MORPAS is a special GIS (geographic information system) software system, based on the MAPGIS platform whose aim is to prospect and evaluate mineral resources quantificationally by synthesizing geological, geophysical, geochemical and remote sensing data. It overlays geological database management, geological background and geological abnormality analysis, image processing of remote sensing and comprehensive abnormality analysis, etc.. It puts forward an integrative solution for the application of GIS in basic-level units and the construction of information engineering in the geological field. As the popularization of computer networks and the request of data sharing, it is necessary to extend its functions in data management so that all its data files can be accessed in the network server. This paper utilizes some MAPGIS functions for the second development and ADO (access data object) technique to access multi-source geological data in SQL Server databases. Then remote visiting and congruous management will be realized in the MORPAS system.
文摘The geological data are constructed in vector format in geographical information system (GIS) while other data such as remote sensing images, geographical data and geochemical data are saved in raster ones. This paper converts the vector data into 8 bit images according to their importance to mineralization each by programming. We can communicate the geological meaning with the raster images by this method. The paper also fuses geographical data and geochemical data with the programmed strata data. The result shows that image fusion can express different intensities effectively and visualize the structure characters in 2 dimensions. Furthermore, it also can produce optimized information from multi-source data and express them more directly.
文摘The Multi-source spatial data distribution is based on WebGIS, and it is an important part of multi-source geographic information management system. a new multi-source spatial data distribution model is proposed on the basis of multisource data storage model and by combining existing map distribution technology, The author developed a multi-source spatial data distribution system which based on MapGIS K9 by using this model and taking full advantage of interfacecode separating thinking and high efficiency characteristic of .net, so high-speed distribution of multi-source spatial data realized.
基金Supported by Science and Technology Project of Lianyungang City(SH0917)
文摘[Objective] The aim was to extract red tide information in Haizhou Bay on the basis of multi-source remote sensing data.[Method] Red tide in Haizhou Bay was studied based on multi-source remote sensing data,such as IRS-P6 data on October 8,2005,Landsat 5-TM data on May 20,2006,MODIS 1B data on October 6,2006 and HY-1B second-grade data on April 22,2009,which were firstly preprocessed through geometric correction,atmospheric correction,image resizing and so on.At the same time,the synchronous environment monitoring data of red tide water were acquired.Then,band ratio method,chlorophyll-a concentration method and secondary filtering method were adopted to extract red tide information.[Result] On October 8,2005,the area of red tide was about 20.0 km2 in Haizhou Bay.There was no red tide in Haizhou bay on May 20,2006.On October 6,2006,large areas of red tide occurred in Haizhou bay,with area of 436.5 km2.On April 22,2009,red tide scattered in Haizhou bay,and its area was about 10.8 km2.[Conclusion] The research would provide technical ideas for the environmental monitoring department of Lianyungang to implement red tide forecast and warning effectively.
基金supported by the China Meteorological Administration Special Public Welfare Research Fund (GYHY201206012, GYHY201406016)the Climate Change Foundation of the China Meteorological Administration (CCSF201338)
文摘This paper analyzes the status of existing resources through extensive research and international cooperation on the basis of four typical global monthly surface temperature datasets including the climate research dataset of the University of East Anglia(CRUTEM3), the dataset of the U.S. National Climatic Data Center(GHCN-V3), the dataset of the U.S. National Aeronautics and Space Administration(GISSTMP), and the Berkeley Earth surface temperature dataset(Berkeley). China's first global monthly temperature dataset over land was developed by integrating the four aforementioned global temperature datasets and several regional datasets from major countries or regions. This dataset contains information from 9,519 stations worldwide of at least 20 years for monthly mean temperature, 7,073 for maximum temperature, and 6,587 for minimum temperature. Compared with CRUTEM3 and GHCN-V3, the station density is much higher particularly for South America, Africa,and Asia. Moreover, data from significantly more stations were available after the year 1990 which dramatically reduced the uncertainty of the estimated global temperature trend during 1990e2011. The integrated dataset can serve as a reliable data source for global climate change research.
文摘The majority of academic researchers present the results of their scientific activity on the Web. This trace can be used to derive useful information of their past, present activity and forecast the future intentions. Hence, social network of academic researchers can be of important value for scientific community. This information can be retrieved from various data source currently available on the Web. From each of them a separate net-work can be built. In this paper we present a method which can be used to combine multiple single-relational networks into a single network which will combine all relations, hence it will be multi-relational.
基金Meteorological Research in the Public Interest,No.GYHY201106014Beijing Nova Program,No.2010B037China Special Fund for the National High Technology Research and Development Program of China(863 Program),No.412230
文摘Snow depth （SD） is a key parameter for research into global climate changes and land surface processes. A method was developed to obtain daily SD images at a higher 4 km spatial resolution and higher precision with SD measurements from in situ observations and passive microwave remote sensing of Advanced Microwave Scanning Radiometer-EOS （AMSR-E） and snow cover measurements of the Interactive Multisensor Snow and Ice Mapping System （IMS）. AMSR-E SD at 25 km spatial resolution was retrieved from AMSR-E products of snow density and snow water equivalent and then corrected using the SD from in situ observations and IMS snow cover. Corrected AMSR-E SD images were then resampled to act as ＂virtual＂ in situ observations to combine with the real in situ observations to interpolate at 4 km spatial resolution SD using the Cressman method. Finally, daily SD data generation for several regions of China demonstrated that the method is well suited to the generation of higher spatial resolution SD data in regions with a lower Digital Elevation Model （DEM） but not so well suited to regions at high altitude and with an undulating terrain, such as the Tibetan Plateau. Analysis of the longer time period SD data generation for January between 2003 and 2010 in northern Xinjiang also demonstrated the feasibility of the method.
基金Project(51274250)supported by the National Natural Science Foundation of ChinaProject(2012BAK09B02-05)supported by the National Key Technology R&D Program during the 12th Five-year Plan of China
文摘An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.
文摘taking the bucket of multi function earth drill as an example, combining with the conception of multi sensor integration and data fusion, adopting the terrene column chart and digging torque formula as control dependence, the detecting method of the earth drill’s working state is introduced. Multi sensor data fusion is done with the aid of BP neural network in Matlab. The data to be interfused are pre processed and the program of simulation and “point checking” is given.
文摘The present paper deals with very important practical problems of wide range of applications. The main target of the present paper is to track all moving boundaries that appear throughout the whole process when dealing with multi-moving boundary problems continuously with time up to the end of the process with high accuracy and minimum number of iterations. A new numerical iterative scheme based the boundary integral equation method is developed to track the moving boundaries as well as compute all unknowns in the problem. Three practical applications, one for vaporization and two for ablation were solved and their results were compared with finite element, heat balance integral and the source and sink results and a good agreement were obtained.
文摘Over the past decade, open-source software use has grown. Today, many companies including Google, Microsoft, Meta, RedHat, MongoDB, and Apache are major participants of open-source contributions. With the increased use of open-source software or integration of open-source software into custom-developed software, the quality of this software component increases in importance. This study examined a sample of open-source applications from GitHub. Static software analytics were conducted, and each application was classified for its risk level. In the analyzed applications, it was found that 90% of the applications were classified as low risk or moderate low risk indicating a high level of quality for open-source applications.
