Design change is an inevitable part of the product development process.This study proposes an improved binary multi‐objective PSO algorithm guided by problem char-acteristics(P‐BMOPSO)to solve the optimisation probl...Design change is an inevitable part of the product development process.This study proposes an improved binary multi‐objective PSO algorithm guided by problem char-acteristics(P‐BMOPSO)to solve the optimisation problem of complex product change plan considering service performance.Firstly,a complex product multi‐layer network with service performance is established for the first time to reveal the impact of change effect propagation on the product service performance.Secondly,the concept of service performance impact(SPI)is defined by decoupling the impact of strongly associated nodes on the service performance in the process of change affect propagation.Then,a triple‐objective selection model of change nodes is established,which includes the three indicators:SPI degree,change cost,and change time.Furthermore,an integer multi‐objective particle swarm optimisation algorithm guided by problem characteristics is developed to solve the model above.Experimental results on the design change problem of a certain type of Skyworth TV verify the effectiveness of the established optimisation model and the proposed P‐BMOPSO algorithm.展开更多
The gears of new energy vehicles are required to withstand higher rotational speeds and greater loads,which puts forward higher precision essentials for gear manufacturing.However,machining process parameters can caus...The gears of new energy vehicles are required to withstand higher rotational speeds and greater loads,which puts forward higher precision essentials for gear manufacturing.However,machining process parameters can cause changes in cutting force/heat,resulting in affecting gear machining precision.Therefore,this paper studies the effect of different process parameters on gear machining precision.A multi-objective optimization model is established for the relationship between process parameters and tooth surface deviations,tooth profile deviations,and tooth lead deviations through the cutting speed,feed rate,and cutting depth of the worm wheel gear grinding machine.The response surface method(RSM)is used for experimental design,and the corresponding experimental results and optimal process parameters are obtained.Subsequently,gray relational analysis-principal component analysis(GRA-PCA),particle swarm optimization(PSO),and genetic algorithm-particle swarm optimization(GA-PSO)methods are used to analyze the experimental results and obtain different optimal process parameters.The results show that optimal process parameters obtained by the GRA-PCA,PSO,and GA-PSO methods improve the gear machining precision.Moreover,the gear machining precision obtained by GA-PSO is superior to other methods.展开更多
The ease of accessing a virtually unlimited pool of resources makes Infrastructure as a Service (IaaS) clouds an ideal platform for running data-intensive workflow applications comprising hundreds of computational tas...The ease of accessing a virtually unlimited pool of resources makes Infrastructure as a Service (IaaS) clouds an ideal platform for running data-intensive workflow applications comprising hundreds of computational tasks. However, executing scientific workflows in IaaS cloud environments poses significant challenges due to conflicting objectives, such as minimizing execution time (makespan) and reducing resource utilization costs. This study responds to the increasing need for efficient and adaptable optimization solutions in dynamic and complex environments, which are critical for meeting the evolving demands of modern users and applications. This study presents an innovative multi-objective approach for scheduling scientific workflows in IaaS cloud environments. The proposed algorithm, MOS-MWMC, aims to minimize total execution time (makespan) and resource utilization costs by leveraging key features of virtual machine instances, such as a high number of cores and fast local SSD storage. By integrating realistic simulations based on the WRENCH framework, the method effectively dimensions the cloud infrastructure and optimizes resource usage. Experimental results highlight the superiority of MOS-MWMC compared to benchmark algorithms HEFT and Max-Min. The Pareto fronts obtained for the CyberShake, Epigenomics, and Montage workflows demonstrate closer proximity to the optimal front, confirming the algorithm’s ability to balance conflicting objectives. This study contributes to optimizing scientific workflows in complex environments by providing solutions tailored to specific user needs while minimizing costs and execution times.展开更多
To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise mode...To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise modeling strategy,cell array operation principle,and Copula theory.Under this framework,we propose a DSM-based Enhanced Kriging(DSMEK)algorithm to synchronously derive the modeling of multi-objective,and explore an adaptive Copula function approach to analyze the correlation among multiple objectives and to assess the synthetical reliability level.In the proposed DSMEK and adaptive Copula methods,the Kriging model is treated as the basis function of DSMEK model,the Multi-Objective Snake Optimizer(MOSO)algorithm is used to search the optimal values of hyperparameters of basis functions,the cell array operation principle is adopted to establish a whole model of multiple objectives,the goodness of fit is utilized to determine the forms of Copula functions,and the determined Copula functions are employed to perform the reliability analyses of the correlation of multi-analytical objectives.Furthermore,three examples,including multi-objective complex function approximation,aeroengine turbine bladeddisc multi-failure mode reliability analyses and aircraft landing gear system brake temperature reliability analyses,are performed to verify the effectiveness of the proposed methods,from the viewpoints of mathematics and engineering.The results show that the DSMEK and adaptive Copula approaches hold obvious advantages in terms of modeling features and simulation performance.The efforts of this work provide a useful way for the modeling of multi-analytical objectives and synthetical reliability analyses of complex structure/system with multi-output responses.展开更多
To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework ba...To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.展开更多
In recent years,surrogate models derived from genuine data samples have proven to be efficient in addressing optimization challenges that are costly or time⁃intensive.However,the individuals in the population become i...In recent years,surrogate models derived from genuine data samples have proven to be efficient in addressing optimization challenges that are costly or time⁃intensive.However,the individuals in the population become indistinguishable as the curse of dimensionality increases in the objective space and the accumulation of surrogate approximated errors.Therefore,in this paper,each objective function is modeled using a radial basis function approach,and the optimal solution set of the surrogate model is located by the multi⁃objective evolutionary algorithm of strengthened dominance relation.The original objective function values of the true evaluations are converted to two indicator values,and then the surrogate models are set up for the two performance indicators.Finally,an adaptive infill sampling strategy that relies on approximate performance indicators is proposed to assist in selecting individuals for real evaluations from the potential optimal solution set.The algorithm is contrasted against several advanced surrogate⁃assisted evolutionary algorithms on two suites of test cases,and the experimental findings prove that the approach is competitive in solving expensive many⁃objective optimization problems.展开更多
AIM:To compare objective dry retinoscopy and subjective refraction measurements in patients with mild keratoconus(KCN)and quantify any differences.METHODS:This cross-sectional study was done on 68 eyes of 68 patients ...AIM:To compare objective dry retinoscopy and subjective refraction measurements in patients with mild keratoconus(KCN)and quantify any differences.METHODS:This cross-sectional study was done on 68 eyes of 68 patients diagnosed with mild KCN.Objective dry retinoscopy using autorefractometer and subjective refraction measurements were performed.Sphere,cylinder,J0,J45,and spherical equivalent values were compared between the two techniques.RESULTS:The mean age of 68 patients with mild KCN was 21.32±5.03y(12–35y).There were 37(54.4%)males.Objective refraction yielded significantly more myopic sphere(-1.44 D vs-0.57 D),higher cylinder magnitude(-2.24 D vs-1.48 D),and more myopic spherical equivalent(-2.56 D vs-1.31 D)compared to subjective refraction(all P<0.05).The mean differences were-0.87 D for sphere,-0.76 D for cylinder,and-1.25 D for spherical equivalent.No significant differences were found for J0 and J45 values,indicating agreement in astigmatism axis(P>0.05).CONCLUSION:In patients with mild KCN,objective dry retinoscopy overestimates the degree of myopia and astigmatism compared to subjective refraction.The irregular cornea in KCN likely impacts objective measurements.Subjective refraction allows compensation for irregularity,providing a more accurate correction.When determining refractive targets,the tendency of objective methods to overcorrect should be considered.展开更多
At present,the identification of tropical cyclone remote precipitation(TRP)requires subjective participation,leading to inconsistent results among different researchers despite adopting the same identification standar...At present,the identification of tropical cyclone remote precipitation(TRP)requires subjective participation,leading to inconsistent results among different researchers despite adopting the same identification standard.Thus,establishing an objective identification method is greatly important.In this study,an objective synoptic analysis technique for TRP(OSAT_TRP)is proposed to identify TRP using daily precipitation datasets,historical tropical cyclone(TC)track data,and the ERA5 reanalysis data.This method includes three steps:first,independent rain belts are separated,and those that might relate to TCs'remote effects are distinguished according to their distance from the TCs.Second,the strong water vapor transport belt from the TC is identified using integrated horizontal water vapor transport(IVT).Third,TRP is distinguished by connecting the first two steps.The TRP obtained through this method can satisfy three criteria,as follows:1)the precipitation occurs outside the circulation of TCs,2)the precipitation is affected by TCs,and 3)a gap exists between the TRP and TC rain belt.Case diagnosis analysis,compared with subjective TRP results and backward trajectory analyses using HYSPLIT,indicates that OSAT_TRP can distinguish TRP even when multiple TCs in the Northwest Pacific are involved.Then,we applied the OSAT_TRP to select typical TRPs and obtained the synoptic-scale environments of the TRP through composite analysis.展开更多
At present, salient object detection (SOD) has achieved considerable progress. However, the methods that perform well still face the issue of inadequate detection accuracy. For example, sometimes there are problems of...At present, salient object detection (SOD) has achieved considerable progress. However, the methods that perform well still face the issue of inadequate detection accuracy. For example, sometimes there are problems of missed and false detections. Effectively optimizing features to capture key information and better integrating different levels of features to enhance their complementarity are two significant challenges in the domain of SOD. In response to these challenges, this study proposes a novel SOD method based on multi-strategy feature optimization. We propose the multi-size feature extraction module (MSFEM), which uses the attention mechanism, the multi-level feature fusion, and the residual block to obtain finer features. This module provides robust support for the subsequent accurate detection of the salient object. In addition, we use two rounds of feature fusion and the feedback mechanism to optimize the features obtained by the MSFEM to improve detection accuracy. The first round of feature fusion is applied to integrate the features extracted by the MSFEM to obtain more refined features. Subsequently, the feedback mechanism and the second round of feature fusion are applied to refine the features, thereby providing a stronger foundation for accurately detecting salient objects. To improve the fusion effect, we propose the feature enhancement module (FEM) and the feature optimization module (FOM). The FEM integrates the upper and lower features with the optimized features obtained by the FOM to enhance feature complementarity. The FOM uses different receptive fields, the attention mechanism, and the residual block to more effectively capture key information. Experimental results demonstrate that our method outperforms 10 state-of-the-art SOD methods.展开更多
The forecast results of temperature based on the intelligent grids of the Central Meteorological Observatory and the meteorological bureau of the autonomous region and the numerical forecast model of the European Cent...The forecast results of temperature based on the intelligent grids of the Central Meteorological Observatory and the meteorological bureau of the autonomous region and the numerical forecast model of the European Center(EC model)from February to December in 2022 were used.Based on the data of the national intelligent grid forecast,the intelligent grid forecast of the regional bureau,EC model,etc.,temperature was predicted.According to the research of the grid point forecast synthesis algorithm with the highest accuracy rate in the recent three days,the temperature grid point correction was conducted in two forms of stations and grids.In order to reduce the deviation caused by the seasonal system temperature difference,a temperature prediction model was established by using the rolling forecast errors of 5,10,15,20,25 and 30 d as the basis data.The verification and evaluation of objective correction results show that the accuracy rate of temperature forecast by the intelligent grid of the regional bureau,the national intelligent grid,and EC model could be increased by 10%,8%,and 12%,respectively.展开更多
The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditio...The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditional approaches like network compression,quantization,and lightweight design often sacrifice accuracy or feature representation robustness.This article introduces the Fast Multi-scale Channel Shuffling Network(FMCSNet),a novel lightweight detection model optimized for mobile devices.FMCSNet integrates a fully convolutional Multilayer Perceptron(MLP)module,offering global perception without significantly increasing parameters,effectively bridging the gap between CNNs and Vision Transformers.FMCSNet achieves a delicate balance between computation and accuracy mainly by two key modules:the ShiftMLP module,including a shift operation and an MLP module,and a Partial group Convolutional(PGConv)module,reducing computation while enhancing information exchange between channels.With a computational complexity of 1.4G FLOPs and 1.3M parameters,FMCSNet outperforms CNN-based and DWConv-based ShuffleNetv2 by 1%and 4.5%mAP on the Pascal VOC 2007 dataset,respectively.Additionally,FMCSNet achieves a mAP of 30.0(0.5:0.95 IoU threshold)with only 2.5G FLOPs and 2.0M parameters.It achieves 32 FPS on low-performance i5-series CPUs,meeting real-time detection requirements.The versatility of the PGConv module’s adaptability across scenarios further highlights FMCSNet as a promising solution for real-time mobile object detection.展开更多
In foggy traffic scenarios, existing object detection algorithms face challenges such as low detection accuracy, poor robustness, occlusion, missed detections, and false detections. To address this issue, a multi-scal...In foggy traffic scenarios, existing object detection algorithms face challenges such as low detection accuracy, poor robustness, occlusion, missed detections, and false detections. To address this issue, a multi-scale object detection algorithm based on an improved YOLOv8 has been proposed. Firstly, a lightweight attention mechanism, Triplet Attention, is introduced to enhance the algorithm’s ability to extract multi-dimensional and multi-scale features, thereby improving the receptive capability of the feature maps. Secondly, the Diverse Branch Block (DBB) is integrated into the CSP Bottleneck with two Convolutions (C2F) module to strengthen the fusion of semantic information across different layers. Thirdly, a new decoupled detection head is proposed by redesigning the original network head based on the Diverse Branch Block module to improve detection accuracy and reduce missed and false detections. Finally, the Minimum Point Distance based Intersection-over-Union (MPDIoU) is used to replace the original YOLOv8 Complete Intersection-over-Union (CIoU) to accelerate the network’s training convergence. Comparative experiments and dehazing pre-processing tests were conducted on the RTTS and VOC-Fog datasets. Compared to the baseline YOLOv8 model, the improved algorithm achieved mean Average Precision (mAP) improvements of 4.6% and 3.8%, respectively. After defogging pre-processing, the mAP increased by 5.3% and 4.4%, respectively. The experimental results demonstrate that the improved algorithm exhibits high practicality and effectiveness in foggy traffic scenarios.展开更多
The Internet of Things (IoT) integrates diverse devices into the Internet infrastructure, including sensors, meters, and wearable devices. Designing efficient IoT networks with these heterogeneous devices requires the...The Internet of Things (IoT) integrates diverse devices into the Internet infrastructure, including sensors, meters, and wearable devices. Designing efficient IoT networks with these heterogeneous devices requires the selection of appropriate routing protocols, which is crucial for maintaining high Quality of Service (QoS). The Internet Engineering Task Force’s Routing Over Low Power and Lossy Networks (IETF ROLL) working group developed the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL) to meet these needs. While the initial RPL standard focused on single-metric route selection, ongoing research explores enhancing RPL by incorporating multiple routing metrics and developing new Objective Functions (OFs). This paper introduces a novel Objective Function (OF), the Reliable and Secure Objective Function (RSOF), designed to enhance the reliability and trustworthiness of parent selection at both the node and link levels within IoT and RPL routing protocols. The RSOF employs an adaptive parent node selection mechanism that incorporates multiple metrics, including Residual Energy (RE), Expected Transmission Count (ETX), Extended RPL Node Trustworthiness (ERNT), and a novel metric that measures node failure rate (NFR). In this mechanism, nodes with a high NFR are excluded from the parent selection process to improve network reliability and stability. The proposed RSOF was evaluated using random and grid topologies in the Cooja Simulator, with tests conducted across small, medium, and large-scale networks to examine the impact of varying node densities. The simulation results indicate a significant improvement in network performance, particularly in terms of average latency, packet acknowledgment ratio (PAR), packet delivery ratio (PDR), and Control Message Overhead (CMO), compared to the standard Minimum Rank with Hysteresis Objective Function (MRHOF).展开更多
According to the demand for weather forecast at the venues of the 14 th National Winter Games,based on the data of the fine grid model of the European Centre(EC)and RMAPS model,as well as the real-time observation dat...According to the demand for weather forecast at the venues of the 14 th National Winter Games,based on the data of the fine grid model of the European Centre(EC)and RMAPS model,as well as the real-time observation data of the competition fields,a dynamic optimal correction method was proposed to improve the accuracy rate of temperature and wind speed prediction.Through techniques such as deviation correction and univariate linear regression,mathematical models applicable to different competition regions were constructed,and the effective correction of objective forecast products within 0-120 h were realized.The results show that this method significantly improved the accuracy rate of the prediction of temperature,wind speed and extreme wind speed,and the effect was more obvious especially when the model performance was unstable.Meanwhile,terrain and climate background had a significant impact on the correction effect.This study provides new technical support for mountain meteorological forecast.展开更多
As the number and complexity of sensors in autonomous vehicles continue to rise,multimodal fusionbased object detection algorithms are increasingly being used to detect 3D environmental information,significantly advan...As the number and complexity of sensors in autonomous vehicles continue to rise,multimodal fusionbased object detection algorithms are increasingly being used to detect 3D environmental information,significantly advancing the development of perception technology in autonomous driving.To further promote the development of fusion algorithms and improve detection performance,this paper discusses the advantages and recent advancements of multimodal fusion-based object detection algorithms.Starting fromsingle-modal sensor detection,the paper provides a detailed overview of typical sensors used in autonomous driving and introduces object detection methods based on images and point clouds.For image-based detection methods,they are categorized into monocular detection and binocular detection based on different input types.For point cloud-based detection methods,they are classified into projection-based,voxel-based,point cluster-based,pillar-based,and graph structure-based approaches based on the technical pathways for processing point cloud features.Additionally,multimodal fusion algorithms are divided into Camera-LiDAR fusion,Camera-Radar fusion,Camera-LiDAR-Radar fusion,and other sensor fusion methods based on the types of sensors involved.Furthermore,the paper identifies five key future research directions in this field,aiming to provide insights for researchers engaged in multimodal fusion-based object detection algorithms and to encourage broader attention to the research and application of multimodal fusion-based object detection.展开更多
Automated detection of suspended anomalous objects on high-speed railway catenary systems using computer vision-based technology is a critical task for ensuring railway transportation safety. Despite the critical impo...Automated detection of suspended anomalous objects on high-speed railway catenary systems using computer vision-based technology is a critical task for ensuring railway transportation safety. Despite the critical importance of this task, conventional vision-based foreign object detection methodologies have predominantly concentrated on image data, neglecting the exploration and integration of textual information. The currently popular multimodal model Contrastive Language-Image Pre-training (CLIP) employs contrastive learning to enable simultaneous understanding of both visual and textual modalities. Drawing inspiration from CLIP’s capabilities, this paper introduces a novel CLIP-based multimodal foreign object detection model tailored for railway applications, referred to as Railway-CLIP. This model leverages CLIP’s robust generalization capabilities to enhance performance in the context of catenary foreign object detection. The Railway-CLIP model is primarily composed of an image encoder and a text encoder. Initially, the Segment Anything Model (SAM) is employed to preprocess raw images, identifying candidate bounding boxes that may contain foreign objects. Both the original images and the detected candidate bounding boxes are subsequently fed into the image encoder to extract their respective visual features. In parallel, distinct prompt templates are crafted for both the original images and the candidate bounding boxes to serve as textual inputs. These prompts are then processed by the text encoder to derive textual features. The image and text encoders collaboratively project the multimodal features into a shared semantic space, facilitating the computation of similarity scores between visual and textual representations. The final detection results are determined based on these similarity scores, ensuring a robust and accurate identification of anomalous objects. Extensive experiments on our collected Railway Anomaly Dataset (RAD) demonstrate that the proposed Railway-CLIP outperforms previous state-of-the-art methods, achieving 97.25% AUROC and 92.66% F1-score, thereby validating the effectiveness and superiority of the proposed approach in real-world high-speed railway anomaly detection scenarios.展开更多
Accurate detection of small objects is critically important in high-stakes applications such as military reconnaissance and emergency rescue.However,low resolution,occlusion,and background interference make small obje...Accurate detection of small objects is critically important in high-stakes applications such as military reconnaissance and emergency rescue.However,low resolution,occlusion,and background interference make small object detection a complex and demanding task.One effective approach to overcome these issues is the integration of multimodal image data to enhance detection capabilities.This paper proposes a novel small object detection method that utilizes three types of multimodal image combinations,such as Hyperspectral-Multispectral(HSMS),Hyperspectral-Synthetic Aperture Radar(HS-SAR),and HS-SAR-Digital Surface Model(HS-SAR-DSM).The detection process is done by the proposed Jaccard Deep Q-Net(JDQN),which integrates the Jaccard similarity measure with a Deep Q-Network(DQN)using regression modeling.To produce the final output,a Deep Maxout Network(DMN)is employed to fuse the detection results obtained from each modality.The effectiveness of the proposed JDQN is validated using performance metrics,such as accuracy,Mean Squared Error(MSE),precision,and Root Mean Squared Error(RMSE).Experimental results demonstrate that the proposed JDQN method outperforms existing approaches,achieving the highest accuracy of 0.907,a precision of 0.904,the lowest normalized MSE of 0.279,and a normalized RMSE of 0.528.展开更多
Objective: To explore the effect of a whole-course nursing objective management system on disease control and quality of life in patients with type 2 diabetes, and to propose strategies for constructing such a system ...Objective: To explore the effect of a whole-course nursing objective management system on disease control and quality of life in patients with type 2 diabetes, and to propose strategies for constructing such a system for these patients. Methods: Ninety patients with type 2 diabetes admitted to the Department of Endocrinology of the hospital from January 2024 to June 2024 were selected. The control group (n = 45) received routine nursing care, while the observation group (n = 45) received whole-course nursing. Indicators such as glucose metabolism and compliance behavior were measured before and after care, and the health and quality of life of patients in both groups were evaluated. Results: A comparison of blood glucose levels and compliance behavior showed that the observation group had lower blood glucose levels than the control group (P < 0.05). Additionally, the compliance behavior score of the observation group was higher than that of the control group (P < 0.05). Conclusion: The holistic nursing model demonstrates significant nursing effects for patients with type 2 diabetes. This approach not only assists in blood sugar control, prevents disease progression, and reduces complications, but also enhances patients’ knowledge of health management, aiding in their recovery.展开更多
To overcome the obstacles of poor feature extraction and little prior information on the appearance of infrared dim small targets,we propose a multi-domain attention-guided pyramid network(MAGPNet).Specifically,we des...To overcome the obstacles of poor feature extraction and little prior information on the appearance of infrared dim small targets,we propose a multi-domain attention-guided pyramid network(MAGPNet).Specifically,we design three modules to ensure that salient features of small targets can be acquired and retained in the multi-scale feature maps.To improve the adaptability of the network for targets of different sizes,we design a kernel aggregation attention block with a receptive field attention branch and weight the feature maps under different perceptual fields with attention mechanism.Based on the research on human vision system,we further propose an adaptive local contrast measure module to enhance the local features of infrared small targets.With this parameterized component,we can implement the information aggregation of multi-scale contrast saliency maps.Finally,to fully utilize the information within spatial and channel domains in feature maps of different scales,we propose the mixed spatial-channel attention-guided fusion module to achieve high-quality fusion effects while ensuring that the small target features can be preserved at deep layers.Experiments on public datasets demonstrate that our MAGPNet can achieve a better performance over other state-of-the-art methods in terms of the intersection of union,Precision,Recall,and F-measure.In addition,we conduct detailed ablation studies to verify the effectiveness of each component in our network.展开更多
With the rapid expansion of drone applications,accurate detection of objects in aerial imagery has become crucial for intelligent transportation,urban management,and emergency rescue missions.However,existing methods ...With the rapid expansion of drone applications,accurate detection of objects in aerial imagery has become crucial for intelligent transportation,urban management,and emergency rescue missions.However,existing methods face numerous challenges in practical deployment,including scale variation handling,feature degradation,and complex backgrounds.To address these issues,we propose Edge-enhanced and Detail-Capturing You Only Look Once(EHDC-YOLO),a novel framework for object detection in Unmanned Aerial Vehicle(UAV)imagery.Based on the You Only Look Once version 11 nano(YOLOv11n)baseline,EHDC-YOLO systematically introduces several architectural enhancements:(1)a Multi-Scale Edge Enhancement(MSEE)module that leverages multi-scale pooling and edge information to enhance boundary feature extraction;(2)an Enhanced Feature Pyramid Network(EFPN)that integrates P2-level features with Cross Stage Partial(CSP)structures and OmniKernel convolutions for better fine-grained representation;and(3)Dynamic Head(DyHead)with multi-dimensional attention mechanisms for enhanced cross-scale modeling and perspective adaptability.Comprehensive experiments on the Vision meets Drones for Detection(VisDrone-DET)2019 dataset demonstrate that EHDC-YOLO achieves significant improvements,increasing mean Average Precision(mAP)@0.5 from 33.2%to 46.1%(an absolute improvement of 12.9 percentage points)and mAP@0.5:0.95 from 19.5%to 28.0%(an absolute improvement of 8.5 percentage points)compared with the YOLOv11n baseline,while maintaining a reasonable parameter count(2.81 M vs the baseline’s 2.58 M).Further ablation studies confirm the effectiveness of each proposed component,while visualization results highlight EHDC-YOLO’s superior performance in detecting objects and handling occlusions in complex drone scenarios.展开更多
基金supported by The National Key Research and Development Program of China(No.2020YFB1708200).
文摘Design change is an inevitable part of the product development process.This study proposes an improved binary multi‐objective PSO algorithm guided by problem char-acteristics(P‐BMOPSO)to solve the optimisation problem of complex product change plan considering service performance.Firstly,a complex product multi‐layer network with service performance is established for the first time to reveal the impact of change effect propagation on the product service performance.Secondly,the concept of service performance impact(SPI)is defined by decoupling the impact of strongly associated nodes on the service performance in the process of change affect propagation.Then,a triple‐objective selection model of change nodes is established,which includes the three indicators:SPI degree,change cost,and change time.Furthermore,an integer multi‐objective particle swarm optimisation algorithm guided by problem characteristics is developed to solve the model above.Experimental results on the design change problem of a certain type of Skyworth TV verify the effectiveness of the established optimisation model and the proposed P‐BMOPSO algorithm.
基金Projects(U22B2084,52275483,52075142)supported by the National Natural Science Foundation of ChinaProject(2023ZY01050)supported by the Ministry of Industry and Information Technology High Quality Development,China。
文摘The gears of new energy vehicles are required to withstand higher rotational speeds and greater loads,which puts forward higher precision essentials for gear manufacturing.However,machining process parameters can cause changes in cutting force/heat,resulting in affecting gear machining precision.Therefore,this paper studies the effect of different process parameters on gear machining precision.A multi-objective optimization model is established for the relationship between process parameters and tooth surface deviations,tooth profile deviations,and tooth lead deviations through the cutting speed,feed rate,and cutting depth of the worm wheel gear grinding machine.The response surface method(RSM)is used for experimental design,and the corresponding experimental results and optimal process parameters are obtained.Subsequently,gray relational analysis-principal component analysis(GRA-PCA),particle swarm optimization(PSO),and genetic algorithm-particle swarm optimization(GA-PSO)methods are used to analyze the experimental results and obtain different optimal process parameters.The results show that optimal process parameters obtained by the GRA-PCA,PSO,and GA-PSO methods improve the gear machining precision.Moreover,the gear machining precision obtained by GA-PSO is superior to other methods.
文摘The ease of accessing a virtually unlimited pool of resources makes Infrastructure as a Service (IaaS) clouds an ideal platform for running data-intensive workflow applications comprising hundreds of computational tasks. However, executing scientific workflows in IaaS cloud environments poses significant challenges due to conflicting objectives, such as minimizing execution time (makespan) and reducing resource utilization costs. This study responds to the increasing need for efficient and adaptable optimization solutions in dynamic and complex environments, which are critical for meeting the evolving demands of modern users and applications. This study presents an innovative multi-objective approach for scheduling scientific workflows in IaaS cloud environments. The proposed algorithm, MOS-MWMC, aims to minimize total execution time (makespan) and resource utilization costs by leveraging key features of virtual machine instances, such as a high number of cores and fast local SSD storage. By integrating realistic simulations based on the WRENCH framework, the method effectively dimensions the cloud infrastructure and optimizes resource usage. Experimental results highlight the superiority of MOS-MWMC compared to benchmark algorithms HEFT and Max-Min. The Pareto fronts obtained for the CyberShake, Epigenomics, and Montage workflows demonstrate closer proximity to the optimal front, confirming the algorithm’s ability to balance conflicting objectives. This study contributes to optimizing scientific workflows in complex environments by providing solutions tailored to specific user needs while minimizing costs and execution times.
基金co-supported by the National Natural Science Foundation of China(Nos.52405293,52375237)China Postdoctoral Science Foundation(No.2024M754219)Shaanxi Province Postdoctoral Research Project Funding,China。
文摘To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise modeling strategy,cell array operation principle,and Copula theory.Under this framework,we propose a DSM-based Enhanced Kriging(DSMEK)algorithm to synchronously derive the modeling of multi-objective,and explore an adaptive Copula function approach to analyze the correlation among multiple objectives and to assess the synthetical reliability level.In the proposed DSMEK and adaptive Copula methods,the Kriging model is treated as the basis function of DSMEK model,the Multi-Objective Snake Optimizer(MOSO)algorithm is used to search the optimal values of hyperparameters of basis functions,the cell array operation principle is adopted to establish a whole model of multiple objectives,the goodness of fit is utilized to determine the forms of Copula functions,and the determined Copula functions are employed to perform the reliability analyses of the correlation of multi-analytical objectives.Furthermore,three examples,including multi-objective complex function approximation,aeroengine turbine bladeddisc multi-failure mode reliability analyses and aircraft landing gear system brake temperature reliability analyses,are performed to verify the effectiveness of the proposed methods,from the viewpoints of mathematics and engineering.The results show that the DSMEK and adaptive Copula approaches hold obvious advantages in terms of modeling features and simulation performance.The efforts of this work provide a useful way for the modeling of multi-analytical objectives and synthetical reliability analyses of complex structure/system with multi-output responses.
基金supported by the confidential research grant No.a8317。
文摘To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.
基金Sponsored by Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(Grant No.2022L294)Taiyuan University of Science and Technology Scientific Research Initial Funding(Grant Nos.W2022018,W20242012)Foundamental Research Program of Shanxi Province(Grant No.202403021212170).
文摘In recent years,surrogate models derived from genuine data samples have proven to be efficient in addressing optimization challenges that are costly or time⁃intensive.However,the individuals in the population become indistinguishable as the curse of dimensionality increases in the objective space and the accumulation of surrogate approximated errors.Therefore,in this paper,each objective function is modeled using a radial basis function approach,and the optimal solution set of the surrogate model is located by the multi⁃objective evolutionary algorithm of strengthened dominance relation.The original objective function values of the true evaluations are converted to two indicator values,and then the surrogate models are set up for the two performance indicators.Finally,an adaptive infill sampling strategy that relies on approximate performance indicators is proposed to assist in selecting individuals for real evaluations from the potential optimal solution set.The algorithm is contrasted against several advanced surrogate⁃assisted evolutionary algorithms on two suites of test cases,and the experimental findings prove that the approach is competitive in solving expensive many⁃objective optimization problems.
文摘AIM:To compare objective dry retinoscopy and subjective refraction measurements in patients with mild keratoconus(KCN)and quantify any differences.METHODS:This cross-sectional study was done on 68 eyes of 68 patients diagnosed with mild KCN.Objective dry retinoscopy using autorefractometer and subjective refraction measurements were performed.Sphere,cylinder,J0,J45,and spherical equivalent values were compared between the two techniques.RESULTS:The mean age of 68 patients with mild KCN was 21.32±5.03y(12–35y).There were 37(54.4%)males.Objective refraction yielded significantly more myopic sphere(-1.44 D vs-0.57 D),higher cylinder magnitude(-2.24 D vs-1.48 D),and more myopic spherical equivalent(-2.56 D vs-1.31 D)compared to subjective refraction(all P<0.05).The mean differences were-0.87 D for sphere,-0.76 D for cylinder,and-1.25 D for spherical equivalent.No significant differences were found for J0 and J45 values,indicating agreement in astigmatism axis(P>0.05).CONCLUSION:In patients with mild KCN,objective dry retinoscopy overestimates the degree of myopia and astigmatism compared to subjective refraction.The irregular cornea in KCN likely impacts objective measurements.Subjective refraction allows compensation for irregularity,providing a more accurate correction.When determining refractive targets,the tendency of objective methods to overcorrect should be considered.
基金supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX22_1136)the National Natural Scientific Foundation of China(No.42275037)+2 种基金the Basic Research Fund of CAMS(No.2023Z016)the Key Laboratory of South China Sea Meteorological Disaster Prevention and Mitigation of Hainan Province(No.SCSF202202)supported by the Jiangsu Collaborative Innovation Center for Climate Change。
文摘At present,the identification of tropical cyclone remote precipitation(TRP)requires subjective participation,leading to inconsistent results among different researchers despite adopting the same identification standard.Thus,establishing an objective identification method is greatly important.In this study,an objective synoptic analysis technique for TRP(OSAT_TRP)is proposed to identify TRP using daily precipitation datasets,historical tropical cyclone(TC)track data,and the ERA5 reanalysis data.This method includes three steps:first,independent rain belts are separated,and those that might relate to TCs'remote effects are distinguished according to their distance from the TCs.Second,the strong water vapor transport belt from the TC is identified using integrated horizontal water vapor transport(IVT).Third,TRP is distinguished by connecting the first two steps.The TRP obtained through this method can satisfy three criteria,as follows:1)the precipitation occurs outside the circulation of TCs,2)the precipitation is affected by TCs,and 3)a gap exists between the TRP and TC rain belt.Case diagnosis analysis,compared with subjective TRP results and backward trajectory analyses using HYSPLIT,indicates that OSAT_TRP can distinguish TRP even when multiple TCs in the Northwest Pacific are involved.Then,we applied the OSAT_TRP to select typical TRPs and obtained the synoptic-scale environments of the TRP through composite analysis.
文摘At present, salient object detection (SOD) has achieved considerable progress. However, the methods that perform well still face the issue of inadequate detection accuracy. For example, sometimes there are problems of missed and false detections. Effectively optimizing features to capture key information and better integrating different levels of features to enhance their complementarity are two significant challenges in the domain of SOD. In response to these challenges, this study proposes a novel SOD method based on multi-strategy feature optimization. We propose the multi-size feature extraction module (MSFEM), which uses the attention mechanism, the multi-level feature fusion, and the residual block to obtain finer features. This module provides robust support for the subsequent accurate detection of the salient object. In addition, we use two rounds of feature fusion and the feedback mechanism to optimize the features obtained by the MSFEM to improve detection accuracy. The first round of feature fusion is applied to integrate the features extracted by the MSFEM to obtain more refined features. Subsequently, the feedback mechanism and the second round of feature fusion are applied to refine the features, thereby providing a stronger foundation for accurately detecting salient objects. To improve the fusion effect, we propose the feature enhancement module (FEM) and the feature optimization module (FOM). The FEM integrates the upper and lower features with the optimized features obtained by the FOM to enhance feature complementarity. The FOM uses different receptive fields, the attention mechanism, and the residual block to more effectively capture key information. Experimental results demonstrate that our method outperforms 10 state-of-the-art SOD methods.
文摘The forecast results of temperature based on the intelligent grids of the Central Meteorological Observatory and the meteorological bureau of the autonomous region and the numerical forecast model of the European Center(EC model)from February to December in 2022 were used.Based on the data of the national intelligent grid forecast,the intelligent grid forecast of the regional bureau,EC model,etc.,temperature was predicted.According to the research of the grid point forecast synthesis algorithm with the highest accuracy rate in the recent three days,the temperature grid point correction was conducted in two forms of stations and grids.In order to reduce the deviation caused by the seasonal system temperature difference,a temperature prediction model was established by using the rolling forecast errors of 5,10,15,20,25 and 30 d as the basis data.The verification and evaluation of objective correction results show that the accuracy rate of temperature forecast by the intelligent grid of the regional bureau,the national intelligent grid,and EC model could be increased by 10%,8%,and 12%,respectively.
基金funded by the National Natural Science Foundation of China under Grant No.62371187the Open Program of Hunan Intelligent Rehabilitation Robot and Auxiliary Equipment Engineering Technology Research Center under Grant No.2024JS101.
文摘The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditional approaches like network compression,quantization,and lightweight design often sacrifice accuracy or feature representation robustness.This article introduces the Fast Multi-scale Channel Shuffling Network(FMCSNet),a novel lightweight detection model optimized for mobile devices.FMCSNet integrates a fully convolutional Multilayer Perceptron(MLP)module,offering global perception without significantly increasing parameters,effectively bridging the gap between CNNs and Vision Transformers.FMCSNet achieves a delicate balance between computation and accuracy mainly by two key modules:the ShiftMLP module,including a shift operation and an MLP module,and a Partial group Convolutional(PGConv)module,reducing computation while enhancing information exchange between channels.With a computational complexity of 1.4G FLOPs and 1.3M parameters,FMCSNet outperforms CNN-based and DWConv-based ShuffleNetv2 by 1%and 4.5%mAP on the Pascal VOC 2007 dataset,respectively.Additionally,FMCSNet achieves a mAP of 30.0(0.5:0.95 IoU threshold)with only 2.5G FLOPs and 2.0M parameters.It achieves 32 FPS on low-performance i5-series CPUs,meeting real-time detection requirements.The versatility of the PGConv module’s adaptability across scenarios further highlights FMCSNet as a promising solution for real-time mobile object detection.
基金supported by the National Natural Science Foundation of China(Grant Nos.62101275 and 62101274).
文摘In foggy traffic scenarios, existing object detection algorithms face challenges such as low detection accuracy, poor robustness, occlusion, missed detections, and false detections. To address this issue, a multi-scale object detection algorithm based on an improved YOLOv8 has been proposed. Firstly, a lightweight attention mechanism, Triplet Attention, is introduced to enhance the algorithm’s ability to extract multi-dimensional and multi-scale features, thereby improving the receptive capability of the feature maps. Secondly, the Diverse Branch Block (DBB) is integrated into the CSP Bottleneck with two Convolutions (C2F) module to strengthen the fusion of semantic information across different layers. Thirdly, a new decoupled detection head is proposed by redesigning the original network head based on the Diverse Branch Block module to improve detection accuracy and reduce missed and false detections. Finally, the Minimum Point Distance based Intersection-over-Union (MPDIoU) is used to replace the original YOLOv8 Complete Intersection-over-Union (CIoU) to accelerate the network’s training convergence. Comparative experiments and dehazing pre-processing tests were conducted on the RTTS and VOC-Fog datasets. Compared to the baseline YOLOv8 model, the improved algorithm achieved mean Average Precision (mAP) improvements of 4.6% and 3.8%, respectively. After defogging pre-processing, the mAP increased by 5.3% and 4.4%, respectively. The experimental results demonstrate that the improved algorithm exhibits high practicality and effectiveness in foggy traffic scenarios.
文摘The Internet of Things (IoT) integrates diverse devices into the Internet infrastructure, including sensors, meters, and wearable devices. Designing efficient IoT networks with these heterogeneous devices requires the selection of appropriate routing protocols, which is crucial for maintaining high Quality of Service (QoS). The Internet Engineering Task Force’s Routing Over Low Power and Lossy Networks (IETF ROLL) working group developed the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL) to meet these needs. While the initial RPL standard focused on single-metric route selection, ongoing research explores enhancing RPL by incorporating multiple routing metrics and developing new Objective Functions (OFs). This paper introduces a novel Objective Function (OF), the Reliable and Secure Objective Function (RSOF), designed to enhance the reliability and trustworthiness of parent selection at both the node and link levels within IoT and RPL routing protocols. The RSOF employs an adaptive parent node selection mechanism that incorporates multiple metrics, including Residual Energy (RE), Expected Transmission Count (ETX), Extended RPL Node Trustworthiness (ERNT), and a novel metric that measures node failure rate (NFR). In this mechanism, nodes with a high NFR are excluded from the parent selection process to improve network reliability and stability. The proposed RSOF was evaluated using random and grid topologies in the Cooja Simulator, with tests conducted across small, medium, and large-scale networks to examine the impact of varying node densities. The simulation results indicate a significant improvement in network performance, particularly in terms of average latency, packet acknowledgment ratio (PAR), packet delivery ratio (PDR), and Control Message Overhead (CMO), compared to the standard Minimum Rank with Hysteresis Objective Function (MRHOF).
文摘According to the demand for weather forecast at the venues of the 14 th National Winter Games,based on the data of the fine grid model of the European Centre(EC)and RMAPS model,as well as the real-time observation data of the competition fields,a dynamic optimal correction method was proposed to improve the accuracy rate of temperature and wind speed prediction.Through techniques such as deviation correction and univariate linear regression,mathematical models applicable to different competition regions were constructed,and the effective correction of objective forecast products within 0-120 h were realized.The results show that this method significantly improved the accuracy rate of the prediction of temperature,wind speed and extreme wind speed,and the effect was more obvious especially when the model performance was unstable.Meanwhile,terrain and climate background had a significant impact on the correction effect.This study provides new technical support for mountain meteorological forecast.
基金funded by the Yangtze River Delta Science and Technology Innovation Community Joint Research Project(2023CSJGG1600)the Natural Science Foundation of Anhui Province(2208085MF173)Wuhu“ChiZhu Light”Major Science and Technology Project(2023ZD01,2023ZD03).
文摘As the number and complexity of sensors in autonomous vehicles continue to rise,multimodal fusionbased object detection algorithms are increasingly being used to detect 3D environmental information,significantly advancing the development of perception technology in autonomous driving.To further promote the development of fusion algorithms and improve detection performance,this paper discusses the advantages and recent advancements of multimodal fusion-based object detection algorithms.Starting fromsingle-modal sensor detection,the paper provides a detailed overview of typical sensors used in autonomous driving and introduces object detection methods based on images and point clouds.For image-based detection methods,they are categorized into monocular detection and binocular detection based on different input types.For point cloud-based detection methods,they are classified into projection-based,voxel-based,point cluster-based,pillar-based,and graph structure-based approaches based on the technical pathways for processing point cloud features.Additionally,multimodal fusion algorithms are divided into Camera-LiDAR fusion,Camera-Radar fusion,Camera-LiDAR-Radar fusion,and other sensor fusion methods based on the types of sensors involved.Furthermore,the paper identifies five key future research directions in this field,aiming to provide insights for researchers engaged in multimodal fusion-based object detection algorithms and to encourage broader attention to the research and application of multimodal fusion-based object detection.
基金supported by the Technology Research and Development Program of China National Railway Group(Q2024T002)the Open Project Fund of National Engineering Research Center of Digital Construction and Evaluation Technology of Urban Rail Transit(2024023).
文摘Automated detection of suspended anomalous objects on high-speed railway catenary systems using computer vision-based technology is a critical task for ensuring railway transportation safety. Despite the critical importance of this task, conventional vision-based foreign object detection methodologies have predominantly concentrated on image data, neglecting the exploration and integration of textual information. The currently popular multimodal model Contrastive Language-Image Pre-training (CLIP) employs contrastive learning to enable simultaneous understanding of both visual and textual modalities. Drawing inspiration from CLIP’s capabilities, this paper introduces a novel CLIP-based multimodal foreign object detection model tailored for railway applications, referred to as Railway-CLIP. This model leverages CLIP’s robust generalization capabilities to enhance performance in the context of catenary foreign object detection. The Railway-CLIP model is primarily composed of an image encoder and a text encoder. Initially, the Segment Anything Model (SAM) is employed to preprocess raw images, identifying candidate bounding boxes that may contain foreign objects. Both the original images and the detected candidate bounding boxes are subsequently fed into the image encoder to extract their respective visual features. In parallel, distinct prompt templates are crafted for both the original images and the candidate bounding boxes to serve as textual inputs. These prompts are then processed by the text encoder to derive textual features. The image and text encoders collaboratively project the multimodal features into a shared semantic space, facilitating the computation of similarity scores between visual and textual representations. The final detection results are determined based on these similarity scores, ensuring a robust and accurate identification of anomalous objects. Extensive experiments on our collected Railway Anomaly Dataset (RAD) demonstrate that the proposed Railway-CLIP outperforms previous state-of-the-art methods, achieving 97.25% AUROC and 92.66% F1-score, thereby validating the effectiveness and superiority of the proposed approach in real-world high-speed railway anomaly detection scenarios.
文摘Accurate detection of small objects is critically important in high-stakes applications such as military reconnaissance and emergency rescue.However,low resolution,occlusion,and background interference make small object detection a complex and demanding task.One effective approach to overcome these issues is the integration of multimodal image data to enhance detection capabilities.This paper proposes a novel small object detection method that utilizes three types of multimodal image combinations,such as Hyperspectral-Multispectral(HSMS),Hyperspectral-Synthetic Aperture Radar(HS-SAR),and HS-SAR-Digital Surface Model(HS-SAR-DSM).The detection process is done by the proposed Jaccard Deep Q-Net(JDQN),which integrates the Jaccard similarity measure with a Deep Q-Network(DQN)using regression modeling.To produce the final output,a Deep Maxout Network(DMN)is employed to fuse the detection results obtained from each modality.The effectiveness of the proposed JDQN is validated using performance metrics,such as accuracy,Mean Squared Error(MSE),precision,and Root Mean Squared Error(RMSE).Experimental results demonstrate that the proposed JDQN method outperforms existing approaches,achieving the highest accuracy of 0.907,a precision of 0.904,the lowest normalized MSE of 0.279,and a normalized RMSE of 0.528.
文摘Objective: To explore the effect of a whole-course nursing objective management system on disease control and quality of life in patients with type 2 diabetes, and to propose strategies for constructing such a system for these patients. Methods: Ninety patients with type 2 diabetes admitted to the Department of Endocrinology of the hospital from January 2024 to June 2024 were selected. The control group (n = 45) received routine nursing care, while the observation group (n = 45) received whole-course nursing. Indicators such as glucose metabolism and compliance behavior were measured before and after care, and the health and quality of life of patients in both groups were evaluated. Results: A comparison of blood glucose levels and compliance behavior showed that the observation group had lower blood glucose levels than the control group (P < 0.05). Additionally, the compliance behavior score of the observation group was higher than that of the control group (P < 0.05). Conclusion: The holistic nursing model demonstrates significant nursing effects for patients with type 2 diabetes. This approach not only assists in blood sugar control, prevents disease progression, and reduces complications, but also enhances patients’ knowledge of health management, aiding in their recovery.
基金the Industry-University-Research Cooperation Fund Project of the Eighth Research Institute of China Aerospace Science and Technology Corporation(No.USCAST2021-5)。
文摘To overcome the obstacles of poor feature extraction and little prior information on the appearance of infrared dim small targets,we propose a multi-domain attention-guided pyramid network(MAGPNet).Specifically,we design three modules to ensure that salient features of small targets can be acquired and retained in the multi-scale feature maps.To improve the adaptability of the network for targets of different sizes,we design a kernel aggregation attention block with a receptive field attention branch and weight the feature maps under different perceptual fields with attention mechanism.Based on the research on human vision system,we further propose an adaptive local contrast measure module to enhance the local features of infrared small targets.With this parameterized component,we can implement the information aggregation of multi-scale contrast saliency maps.Finally,to fully utilize the information within spatial and channel domains in feature maps of different scales,we propose the mixed spatial-channel attention-guided fusion module to achieve high-quality fusion effects while ensuring that the small target features can be preserved at deep layers.Experiments on public datasets demonstrate that our MAGPNet can achieve a better performance over other state-of-the-art methods in terms of the intersection of union,Precision,Recall,and F-measure.In addition,we conduct detailed ablation studies to verify the effectiveness of each component in our network.
文摘With the rapid expansion of drone applications,accurate detection of objects in aerial imagery has become crucial for intelligent transportation,urban management,and emergency rescue missions.However,existing methods face numerous challenges in practical deployment,including scale variation handling,feature degradation,and complex backgrounds.To address these issues,we propose Edge-enhanced and Detail-Capturing You Only Look Once(EHDC-YOLO),a novel framework for object detection in Unmanned Aerial Vehicle(UAV)imagery.Based on the You Only Look Once version 11 nano(YOLOv11n)baseline,EHDC-YOLO systematically introduces several architectural enhancements:(1)a Multi-Scale Edge Enhancement(MSEE)module that leverages multi-scale pooling and edge information to enhance boundary feature extraction;(2)an Enhanced Feature Pyramid Network(EFPN)that integrates P2-level features with Cross Stage Partial(CSP)structures and OmniKernel convolutions for better fine-grained representation;and(3)Dynamic Head(DyHead)with multi-dimensional attention mechanisms for enhanced cross-scale modeling and perspective adaptability.Comprehensive experiments on the Vision meets Drones for Detection(VisDrone-DET)2019 dataset demonstrate that EHDC-YOLO achieves significant improvements,increasing mean Average Precision(mAP)@0.5 from 33.2%to 46.1%(an absolute improvement of 12.9 percentage points)and mAP@0.5:0.95 from 19.5%to 28.0%(an absolute improvement of 8.5 percentage points)compared with the YOLOv11n baseline,while maintaining a reasonable parameter count(2.81 M vs the baseline’s 2.58 M).Further ablation studies confirm the effectiveness of each proposed component,while visualization results highlight EHDC-YOLO’s superior performance in detecting objects and handling occlusions in complex drone scenarios.
