The spin-exchange relaxation-free atomic gyroscope,with its exceptionally high theoretical precision,demonstrates immense potential to become the next-generation strategic-grade gyroscope.However,due to technological ...The spin-exchange relaxation-free atomic gyroscope,with its exceptionally high theoretical precision,demonstrates immense potential to become the next-generation strategic-grade gyroscope.However,due to technological noise,there is still a significant gap between its actual precision and theoretical precision.This study identifies the key factor limiting the precision of the SERF gyroscope as coupling noise.By optimizing the detection loop structure,a distinction between the dual-axis signals'response to optical and magnetic fields was achieved-where the optical errors responded similarly,while the response to magnetic noise was opposite.Based on the differences in the optical-magnetic response of the dual-axis signals,empirical mode decomposition was used to decompose the dual-axis gyroscope signals into multiple intrinsic mode functions,and Allan deviation analysis was applied to analyze the noise characteristics of the intrinsic mode functions over various periods.This study successfully reveals that optical errors caused by thermal-optical coupling and long-period magnetic noise induced by thermal-magnetic coupling are the dominant factors limiting the long-term stability of the SERF gyroscope.Based on these analyses,the study concludes that to achieve strategic-grade precision for the SERF gyroscope,it is essential to effectively address the noise issues caused by multi-physical field couplings.展开更多
In the analysis of functionally graded materials （FGMs）, the uncoupled approach is used broadly, which is based on homogenized material property and ignores the effect Of local micro-structural interaction. The high...In the analysis of functionally graded materials （FGMs）, the uncoupled approach is used broadly, which is based on homogenized material property and ignores the effect Of local micro-structural interaction. The higher-order theory for FGMs （HOTFGM） is a coupled approach that explicitly takes the effect of micro-structural gradation and the local interaction of the spatially variable inclusion phase into account. Based on the HOTFGM, this article presents a quadrilateral element-based method for the calculation of multi-scale temperature field （QTF）. In this method, the discrete cells are quadrilateral including rectangular while the surface-averaged quantities are the primary variables which replace the coefficients employed in the temperature function. In contrast with the HOTFGM, this method improves the efficiency, eliminates the restriction of being rectangular cells and expands the solution scale. The presented results illustrate the efficiency of the QTF and its advantages in analyzing FGMs.展开更多
Human activities, such as blasting excavation, bolting, grouting and impounding of reservoirs, will lead to disturbances to rock masses and variations in their structural features and material properties. These engine...Human activities, such as blasting excavation, bolting, grouting and impounding of reservoirs, will lead to disturbances to rock masses and variations in their structural features and material properties. These engineering disturbances are important factors that would alter the natural evolutionary processes or change the multi-field interactions in the rock masses from their initial equilibrium states. The concept of generalized multi-field couplings was proposed by placing particular emphasis on the role of engineering disturbances in traditional multi-field couplings in rock masses. A mathematical model was then developed, in which the effects of engineering disturbances on the coupling-processes were described with changes in boundary conditions and evolutions in thermo-hydro-mechanical （THM） properties of the rocks. A parameter, d, which is similar to damage variables but has a broader physical meaning, was conceptually introduced to represent the degree of engineering disturbances and the couplings among the material properties. The effects of blasting excavation, bolting and grouting in rock engineering were illustrated with various field observations or theoretical results, on which the degree of disturbances and the variations in elastic moduli and permeabilities were particularly focused. The influences of excavation and groundwater drainage on the seepage flow and stability of the slopes were demonstrated with numerical simulations. The proposed approach was further employed to investigate the coupled hydro-mechanical responses of a high rock slope to excavation, bolting and impounding of the reservoir in the dam left abutment of Jinping I hydropower station. The impacts of engineering disturbances on the deformation and stability of the slope during construction and operation were demonstrated.展开更多
In order to study the multi-field coupling mechanical behavior of the simply-supported conductive rectangular thin plate under the condition of an externally lateral strong impulsive magnetic field, that is the dynami...In order to study the multi-field coupling mechanical behavior of the simply-supported conductive rectangular thin plate under the condition of an externally lateral strong impulsive magnetic field, that is the dynamic buckling phenomenon of the thin plates in the effect of the magnetic volume forces produced by the interaction between the eddy current and the magnetic fields, a FEM analysis program is developed to characterize the phenomena of magnetoelastic buckling and instability of the plates. The critical values of magnetic field for the three different initial vibrating modes are obtained, with a detailed discussion made on the effects of the lengththickness ratio a/h of the plate and the length-width ratio a/b as well as the impulse parameter on the critical value BOcr of the applied magnetic field.展开更多
In order to obtain cast metal of high quality, an investigation was carried out by simultaneous imposition of multi electromagnetic fields from the outside of a cold crucible copper mold. Sn 4.5%Pb as a simulator of h...In order to obtain cast metal of high quality, an investigation was carried out by simultaneous imposition of multi electromagnetic fields from the outside of a cold crucible copper mold. Sn 4.5%Pb as a simulator of high melting point metal was continuously cast under different conditions. The results show that multi electromagnetic fields can eliminate surface defects, and coarse columnar grains of the solidification structure is turned into equiaxed crystal with the increase of magnetic flux density. Moreover, finer equiaxed crystal structure is obtained when rapidly solidified sheet is fed into the mold during continuous casting.[展开更多
A piezoelectric centrifugal pump was developed previously to overcome the low frequency responses of piezoelectric pumps with check valves and liquid reflux of conventional valveless piezoelectric pumps. However, the ...A piezoelectric centrifugal pump was developed previously to overcome the low frequency responses of piezoelectric pumps with check valves and liquid reflux of conventional valveless piezoelectric pumps. However, the electro-mechanical-fluidic analysis on this pump has not been done. Therefore, multi-field analysis and experimen- tal verification on piezoelectrically actuated centrifugal valveless pumps are conducted for liquid transport appli- cations. The valveless pump consists of two piezoelectric sheets and a metal tube with piezoelectric elements pushing the metal tube to swing at the first bending resonant fre- quency. The centrifugal force generated by the swinging motion will force the liquid out of the metal tube. The governing equations for the solid and fluid domains are established, and the coupling relations of the mechanical, electrical and fluid fields are described. The bending res- onant frequency and bending mode in solid domain are discussed, and the liquid flow rate, velocity profile, and gauge pressure are investigated in fluid domain. The working frequency and flow rate concerning different components sizes are analyzed and verified through experiments to guide the pump design. A fabricated pro- totype with an outer diameter of 2.2 mm and a length of 80 mm produced the largest flow rate of 13.8 mL/min at backpressure of 0.8 kPa with driving voltage of 80 Vpp. Bysolving the electro-mechanical-fluidic coupling problem, the model developed can provide theoretical guidance on the optimization of centrifugal valveless pump characters.展开更多
A finite element approach based on the micromechanics was performed to estimate the multi-field properties of electro-magneto-thermoelastic composites. The thermal field and the involved pyroelectric and pyromagnetic ...A finite element approach based on the micromechanics was performed to estimate the multi-field properties of electro-magneto-thermoelastic composites. The thermal field and the involved pyroelectric and pyromagnetic effect of the multi-phase composite materials were taken into account in the investigation and implemented in the finite element modeling. The multi- fields related to the electric field, magnetic field, deformation and temperature field, as well as their coupling effects of the smart composites under periodic boundary conditions were obtained numerically. Especially, by means of the homogenization approximation, the effective thermal ex- pansion coefficients, pyroelectric coefficients, pyromagnetic coefficients and other elastic, electric, and magnetic properties for the piezoelectric material, piezomagnetic material and magnetoelec- tric material were calculated, respectively. Some results are compared to the theoretical predictions by the well-known Mori-Tanaka method to show good agreements.展开更多
By coupling the phase field model with the continuity equation of incompressible fluid, Navier–Stokes equation,electric field equation, and other governing equations, a multi-field coupling model for multi-bubble coa...By coupling the phase field model with the continuity equation of incompressible fluid, Navier–Stokes equation,electric field equation, and other governing equations, a multi-field coupling model for multi-bubble coalescence in a viscous fluids is established. The phase field method is used to capture the two-phase interface. The motion and coalescence of a pair of coaxial bubbles under an external uniform electric field and the effects of different electric field strengths on the interaction and coalescence of rising bubbles are studied. The results show that the uniform electric field accelerates the collision and coalescence process of double bubbles in the fluid, and increases the rising velocity of the coalesced bubble.The electric field with an intensity of E = 2 kV/mm is reduced about 2 times compared with that without electric field in coalescence time. When the electric field strength is strong(E ≥ 1 kV/mm), the coalesced bubble will rupture before it rises to the top of the calculation area, and the time of the bubble rupturing also decreases with the increase of the electric field strength. The phase field method is compared with the simulation results of Lattice Boltzmann Method(LBM), and the shape of bubble obtained by the two methods is in good agreement, which verifies the correctness of the calculation model.展开更多
An upwind finite element(FE)based algorithm to calculate the ion flow field in the vicinity of multi-circuit DC transmission lines is described.The initial value estimation and boundary condition are optimized,so deta...An upwind finite element(FE)based algorithm to calculate the ion flow field in the vicinity of multi-circuit DC transmission lines is described.The initial value estimation and boundary condition are optimized,so details of the transmission lines such as bundle conductors and ground wires can be taken into account in the simulation model.Comparison between measured and computed ground level total electrical field and ion current density shows satisfactory agreement.The ion flow field of a ±500 kV HVDC project with bipolar lines on the same tower is simulated.The total electrical field and ion current density on ground level are compared among different line arrangements.展开更多
We propose a multi-field implicit finite element method for analyzing the electromechanical behavior of dielectric elastomers. This method is based on a four-field variational principle, which includes displacement an...We propose a multi-field implicit finite element method for analyzing the electromechanical behavior of dielectric elastomers. This method is based on a four-field variational principle, which includes displacement and electric potential for the electromechanical coupling analysis, and additional independent fields to address the incompressible constraint of the hyperelastic material. Linearization of the variational form and finite element discretization are adopted for the numerical implementation. A general FEM program framework is devel- oped using C＋＋ based on the open-source finite element library deal.II to implement this proposed algorithm. Numerical examples demonstrate the accuracy, convergence properties, mesh-independence properties, and scalability of this method. We also use the method for eigenvalue analysis of a dielectric elastomer actuator subject to electromechanical loadings. Our finite element implementation is available as an online supplementary material.展开更多
Based on systematized physical, chemical, and biological modules, a multi-species harmful algal bloom （HAB） model coupled with background ecological fields was established. This model schematically embod-ied that HA...Based on systematized physical, chemical, and biological modules, a multi-species harmful algal bloom （HAB） model coupled with background ecological fields was established. This model schematically embod-ied that HAB causative algal species and the background ecological system, quantified as total biomass, were significantly different in terms of the chemical and biological processes during a HAB while the inter-action between the two was present. The model also included a competition and interaction mechanism between the HAB algal species or populations. The Droop equation was optimized by considering tempera-ture, salinity, and suspended material impact factors in the parameterization of algal growth rate with the nutrient threshold. Two HAB processes in the springs of 2004 and 2005 were simulated using this model. Both simulation results showed consistent trends with corresponding HAB processes observed in the East China Sea, which indicated the rationality of the model. This study made certain progress in modeling HABs, which has great application potential for HAB diagnosis, prediction, and prevention.展开更多
This work establishes a temperature-controlled sequence function, and a new multi-phase-field model, for liquid- solid-solid multi-phase transformation by coupling the liquid-solid phase transformation model with the ...This work establishes a temperature-controlled sequence function, and a new multi-phase-field model, for liquid- solid-solid multi-phase transformation by coupling the liquid-solid phase transformation model with the solid-solid phase transformation model. Taking an Fe-C alloy as an example, the continuous evolution of a multi-phase transformation is simulated by using this new model. In addition, the growth of grains affected by the grain orientation of the parent phase （generated in liquid-solid phase transformation） in the solid-solid phase transformation is studied. The results show that the morphology of ferrite grains which nucleate at the boundaries of the austenite grains is influenced by the orientation of the parent austenite grains. The growth rate of ferrite grains which nucleate at small-angle austenite grain boundaries is faster than those that nucleate at large-angle austenite grain boundaries. The difference of the growth rate of ferrites grains in different parent phase that nucleate at large-angle austenite grain boundaries, on both sides of the boundaries, is greater than that of ferrites nucleating at small-angle austenite grain boundaries.展开更多
Steam injection is a most effective way for improving heavy oil recovery efficiency, and it has academic and practical significance for the mechanism of multi-field synergy oil displacement. Mechanism of “diversified...Steam injection is a most effective way for improving heavy oil recovery efficiency, and it has academic and practical significance for the mechanism of multi-field synergy oil displacement. Mechanism of “diversified” oil displacement which is obtained by traditional study methods in the exploitation territory of oil and gas fields has both respective roles and mutual cross shortages. To describe and analyze the displacement process of multi-field coupling with exergy transfer can simplify this kind of problem by introducing a unified goal-driving exergy. It needs to use the method of theoretical modeling, numerical simulation and experimental validation to study the basic law of exergy transfer in the oil displacement process of multi-field synergy, make a thorough research for the flooding process of steam injection with exergy transfer theory and reveal the oil displacement mechanism in steam injection of multi-field synergy. Thus the theory instruction and technical support can be provided to improve reservoirs producing degree and extraction ratio.展开更多
The problem of the unmanned surface vessel (USV) path planning in static and dynamic obstacle environments is addressed in this paper. Multi-behavior fusion based potential field method is proposed, which contains thr...The problem of the unmanned surface vessel (USV) path planning in static and dynamic obstacle environments is addressed in this paper. Multi-behavior fusion based potential field method is proposed, which contains three behaviors: goal-seeking, boundary-memory following and dynamic-obstacle avoidance. Then, different activation conditions are designed to determine the current behavior. Meanwhile, information on the positions, velocities and the equation of motion for obstacles are detected and calculated by sensor data. Besides, memory information is introduced into the boundary following behavior to enhance cognition capability for the obstacles, and avoid local minima problem caused by the potential field method. Finally, the results of theoretical analysis and simulation show that the collision-free path can be generated for USV within different obstacle environments, and further validated the performance and effectiveness of the presented strategy.展开更多
The pursuit problem is a well-known problem in computer science. In this problem, a group of predator agents attempt to capture a prey agent in an environment with various obstacle types, partial observation, and an i...The pursuit problem is a well-known problem in computer science. In this problem, a group of predator agents attempt to capture a prey agent in an environment with various obstacle types, partial observation, and an infinite grid-world. Predator agents are applied algorithms that use the univector field method to reach the prey agent, strategies for avoiding obstacles and strategies for cooperation between predator agents. Obstacle avoidance strategies are generalized and presented through strategies called hitting and following boundary(HFB); trapped and following shortest path(TFSP); and predicted and following shortest path(PFSP). In terms of cooperation, cooperation strategies are employed to more quickly reach and capture the prey agent. Experimental results are shown to illustrate the efficiency of the method in the pursuit problem.展开更多
Working memory plays an important role in human cognition. This study investigated how working memory was encoded by the power of multichannel local field potentials （LFPs） based on sparse non negative matrix factor...Working memory plays an important role in human cognition. This study investigated how working memory was encoded by the power of multichannel local field potentials （LFPs） based on sparse non negative matrix factorization （SNMF）. SNMF was used to extract features from LFPs recorded from the prefrontal cortex of four SpragueDawley rats during a memory task in a Y maze, with 10 trials for each rat. Then the powerincreased LFP components were selected as working memoryrelated features and the other components were removed. After that, the inverse operation of SNMF was used to study the encoding of working memory in the time frequency domain. We demonstrated that theta and gamma power increased significantly during the working memory task. The results suggested that postsynaptic activity was simulated well by the sparse activity model. The theta and gamma bands were meaningful for encoding working memory.展开更多
Nonlinear stability of sensor elastic element- corrugated shallow spherical shell in coupled multi-field is studied. With the equivalent orthotropic parameter obtairled by the author, the corrugated shallow spherical ...Nonlinear stability of sensor elastic element- corrugated shallow spherical shell in coupled multi-field is studied. With the equivalent orthotropic parameter obtairled by the author, the corrugated shallow spherical shell is considered as an orthotropic shallow spherical shell, and geometrical nonlinearity and transverse shear deformation are taken into account. Nonlinear governing equations are obtained. The critical load is obtained using a modified iteration method. The effect of temperature variation and shear rigidity variation on stability is analyzed.展开更多
The PPG PITT-CHAR XP flame retardant system has been used by COOEC to preventing the thermal softening of steel in the high temperature,whose degradation temperature is 80 ℃.To prevent damage to PPG PITT-CHAR XP fire...The PPG PITT-CHAR XP flame retardant system has been used by COOEC to preventing the thermal softening of steel in the high temperature,whose degradation temperature is 80 ℃.To prevent damage to PPG PITT-CHAR XP fire retardant paint from excessive heat during welding,it is necessary to get accurately reserved area near the welding joints prior to welding. For the foregoing reasons,the 80 ℃ temperature field distribution of thick plate multi-pass welding was analyzed with SYSWELD.The influence of welding groove form and time interval on welding temperature field was also analyzed. Results showed that the range of 80 ℃ welding temperature field increased with the increasing of weld layers at first and then it inclined to stable value. Interpass time setting was crucial to control the range of 80 ℃ welding temperature field. It was also found that double V groove had better thermal diffusivity than double-bevel groove.And double-bevel groove was better than single V groove.展开更多
The accurate theoretical expressions of the mean field operator associated with the multi-configuration time-dependent Hartree-Fock （MCTDHF） method are presented in this paper. By using a theoretical formula, derive...The accurate theoretical expressions of the mean field operator associated with the multi-configuration time-dependent Hartree-Fock （MCTDHF） method are presented in this paper. By using a theoretical formula, derived without approxima- tion, we can study the multi-electron correlation dynamics accurately. Some illustrative calculations are carried out to check the accuracy of the expression of the mean field operator. The results of illustrative calculations indicate the reliability of the accurate expression of the mean field operator. This theoretical calculation method for the mean field operator may be of considerable help in future studies of the correlated dynamics of many-electron systems in strong laser fields.展开更多
The purpose of this study was to grasp current potential problems of dose error in intensity-modulated proton therapy (IMPT) plans. We were interested in dose differences of the Varian Eclipse treatment planning syste...The purpose of this study was to grasp current potential problems of dose error in intensity-modulated proton therapy (IMPT) plans. We were interested in dose differences of the Varian Eclipse treatment planning system (TPS) and the fast dose calculation method (FDC) for single-field optimization (SFO) and multi-field optimization (MFO) IMPT plans. In addition, because some authors have reported dosimetric benefit of a proton arc therapy with ultimate multi-fields in recent years, we wanted to evaluate how the number of fields and beam angles affect the differences for IMPT plans. Therefore, for one brain cancer patient with a large heterogeneity, SFO and MFO IMPT plans with various multi-angle beams were planned by the TPS. Dose distributions for each IMPT plan were calculated by both the TPS’s conventional pencil beam algorithm and the FDC. The dosimetric parameters were compared between the two algorithms. The TPS overestimated 400 - 500 cGy (RBE) for minimum dose to the CTV relative to the dose calculated by the FDC. These differences indicate clinically relevant effect on clinical results. In addition, we observed that the maximum difference in dose calculated between the TPS and the FDC was about 900 cGy (RBE) for the right optic nerve, and this quantity also has a possibility to have a clinical effect. The major difference was not seen in calculations for SFO IMPT planning and those for MFO IMPT planning. Differences between the TPS and the FDC in SFO and MFO IMPT plans depend strongly on beam arrangement and the presence of a heterogeneous body. We advocate use of a Monte Carlo method in proton treatment planning to deliver the most precise proton dose in IMPT.展开更多
基金supported by Hefei National Laboratory,Innovation Program for Quantum Science and Technology(2021ZD0300400/2021ZD0300402)the Beijing Natural Science Foundation(3252013)the China Postdoctoral Science Foundation(2024T171116).
文摘The spin-exchange relaxation-free atomic gyroscope,with its exceptionally high theoretical precision,demonstrates immense potential to become the next-generation strategic-grade gyroscope.However,due to technological noise,there is still a significant gap between its actual precision and theoretical precision.This study identifies the key factor limiting the precision of the SERF gyroscope as coupling noise.By optimizing the detection loop structure,a distinction between the dual-axis signals'response to optical and magnetic fields was achieved-where the optical errors responded similarly,while the response to magnetic noise was opposite.Based on the differences in the optical-magnetic response of the dual-axis signals,empirical mode decomposition was used to decompose the dual-axis gyroscope signals into multiple intrinsic mode functions,and Allan deviation analysis was applied to analyze the noise characteristics of the intrinsic mode functions over various periods.This study successfully reveals that optical errors caused by thermal-optical coupling and long-period magnetic noise induced by thermal-magnetic coupling are the dominant factors limiting the long-term stability of the SERF gyroscope.Based on these analyses,the study concludes that to achieve strategic-grade precision for the SERF gyroscope,it is essential to effectively address the noise issues caused by multi-physical field couplings.
基金National Natural Science Foundation of China (2009ZB52028,05C52013)Ph.D. Programs Foundation of Ministry of Education of China (20070287039)
文摘In the analysis of functionally graded materials （FGMs）, the uncoupled approach is used broadly, which is based on homogenized material property and ignores the effect Of local micro-structural interaction. The higher-order theory for FGMs （HOTFGM） is a coupled approach that explicitly takes the effect of micro-structural gradation and the local interaction of the spatially variable inclusion phase into account. Based on the HOTFGM, this article presents a quadrilateral element-based method for the calculation of multi-scale temperature field （QTF）. In this method, the discrete cells are quadrilateral including rectangular while the surface-averaged quantities are the primary variables which replace the coefficients employed in the temperature function. In contrast with the HOTFGM, this method improves the efficiency, eliminates the restriction of being rectangular cells and expands the solution scale. The presented results illustrate the efficiency of the QTF and its advantages in analyzing FGMs.
基金Supported by the National Natural Science Fund for Distinguished Young Scholars of China(50725931)the National Natural Science Foundation of China(50839004,51079107)the Supporting Program of the "Eleventh Five-year Plan" for Sci & Tech Research of China(2008BAB29B01)
文摘Human activities, such as blasting excavation, bolting, grouting and impounding of reservoirs, will lead to disturbances to rock masses and variations in their structural features and material properties. These engineering disturbances are important factors that would alter the natural evolutionary processes or change the multi-field interactions in the rock masses from their initial equilibrium states. The concept of generalized multi-field couplings was proposed by placing particular emphasis on the role of engineering disturbances in traditional multi-field couplings in rock masses. A mathematical model was then developed, in which the effects of engineering disturbances on the coupling-processes were described with changes in boundary conditions and evolutions in thermo-hydro-mechanical （THM） properties of the rocks. A parameter, d, which is similar to damage variables but has a broader physical meaning, was conceptually introduced to represent the degree of engineering disturbances and the couplings among the material properties. The effects of blasting excavation, bolting and grouting in rock engineering were illustrated with various field observations or theoretical results, on which the degree of disturbances and the variations in elastic moduli and permeabilities were particularly focused. The influences of excavation and groundwater drainage on the seepage flow and stability of the slopes were demonstrated with numerical simulations. The proposed approach was further employed to investigate the coupled hydro-mechanical responses of a high rock slope to excavation, bolting and impounding of the reservoir in the dam left abutment of Jinping I hydropower station. The impacts of engineering disturbances on the deformation and stability of the slope during construction and operation were demonstrated.
基金Project supported by the National Natural Sciences Foundation of China (Nos. 10132010 and 90405005).
文摘In order to study the multi-field coupling mechanical behavior of the simply-supported conductive rectangular thin plate under the condition of an externally lateral strong impulsive magnetic field, that is the dynamic buckling phenomenon of the thin plates in the effect of the magnetic volume forces produced by the interaction between the eddy current and the magnetic fields, a FEM analysis program is developed to characterize the phenomena of magnetoelastic buckling and instability of the plates. The critical values of magnetic field for the three different initial vibrating modes are obtained, with a detailed discussion made on the effects of the lengththickness ratio a/h of the plate and the length-width ratio a/b as well as the impulse parameter on the critical value BOcr of the applied magnetic field.
文摘In order to obtain cast metal of high quality, an investigation was carried out by simultaneous imposition of multi electromagnetic fields from the outside of a cold crucible copper mold. Sn 4.5%Pb as a simulator of high melting point metal was continuously cast under different conditions. The results show that multi electromagnetic fields can eliminate surface defects, and coarse columnar grains of the solidification structure is turned into equiaxed crystal with the increase of magnetic flux density. Moreover, finer equiaxed crystal structure is obtained when rapidly solidified sheet is fed into the mold during continuous casting.[
基金Supported by National Natural Science Foundation of China(Grant No.51305439)Jiangsu Provincial Natural Science Foundation of China(Grant No.BK20141205)
文摘A piezoelectric centrifugal pump was developed previously to overcome the low frequency responses of piezoelectric pumps with check valves and liquid reflux of conventional valveless piezoelectric pumps. However, the electro-mechanical-fluidic analysis on this pump has not been done. Therefore, multi-field analysis and experimen- tal verification on piezoelectrically actuated centrifugal valveless pumps are conducted for liquid transport appli- cations. The valveless pump consists of two piezoelectric sheets and a metal tube with piezoelectric elements pushing the metal tube to swing at the first bending resonant fre- quency. The centrifugal force generated by the swinging motion will force the liquid out of the metal tube. The governing equations for the solid and fluid domains are established, and the coupling relations of the mechanical, electrical and fluid fields are described. The bending res- onant frequency and bending mode in solid domain are discussed, and the liquid flow rate, velocity profile, and gauge pressure are investigated in fluid domain. The working frequency and flow rate concerning different components sizes are analyzed and verified through experiments to guide the pump design. A fabricated pro- totype with an outer diameter of 2.2 mm and a length of 80 mm produced the largest flow rate of 13.8 mL/min at backpressure of 0.8 kPa with driving voltage of 80 Vpp. Bysolving the electro-mechanical-fluidic coupling problem, the model developed can provide theoretical guidance on the optimization of centrifugal valveless pump characters.
基金supported by the National Natural Science Foundation of China(No.11172117)Doctoral Fund of Ministry of Education of China(No.20120211110005)the Foundation for Innovative Research Groups of the NNSFC(No.11121202)
文摘A finite element approach based on the micromechanics was performed to estimate the multi-field properties of electro-magneto-thermoelastic composites. The thermal field and the involved pyroelectric and pyromagnetic effect of the multi-phase composite materials were taken into account in the investigation and implemented in the finite element modeling. The multi- fields related to the electric field, magnetic field, deformation and temperature field, as well as their coupling effects of the smart composites under periodic boundary conditions were obtained numerically. Especially, by means of the homogenization approximation, the effective thermal ex- pansion coefficients, pyroelectric coefficients, pyromagnetic coefficients and other elastic, electric, and magnetic properties for the piezoelectric material, piezomagnetic material and magnetoelec- tric material were calculated, respectively. Some results are compared to the theoretical predictions by the well-known Mori-Tanaka method to show good agreements.
基金supported by the National Natural Science Foundation of China(Grant Nos.51661020,11504149,and 11364024)the Postdoctoral Science Foundation of China(Grant No.2014M560371)the Funds for Distinguished Young Scientists of Lanzhou University of Technology,China(Grant No.J201304)
文摘By coupling the phase field model with the continuity equation of incompressible fluid, Navier–Stokes equation,electric field equation, and other governing equations, a multi-field coupling model for multi-bubble coalescence in a viscous fluids is established. The phase field method is used to capture the two-phase interface. The motion and coalescence of a pair of coaxial bubbles under an external uniform electric field and the effects of different electric field strengths on the interaction and coalescence of rising bubbles are studied. The results show that the uniform electric field accelerates the collision and coalescence process of double bubbles in the fluid, and increases the rising velocity of the coalesced bubble.The electric field with an intensity of E = 2 kV/mm is reduced about 2 times compared with that without electric field in coalescence time. When the electric field strength is strong(E ≥ 1 kV/mm), the coalesced bubble will rupture before it rises to the top of the calculation area, and the time of the bubble rupturing also decreases with the increase of the electric field strength. The phase field method is compared with the simulation results of Lattice Boltzmann Method(LBM), and the shape of bubble obtained by the two methods is in good agreement, which verifies the correctness of the calculation model.
基金Project Supported by China11th Five-year National Key Technologies R&D Program(2006BAA02A20)
文摘An upwind finite element(FE)based algorithm to calculate the ion flow field in the vicinity of multi-circuit DC transmission lines is described.The initial value estimation and boundary condition are optimized,so details of the transmission lines such as bundle conductors and ground wires can be taken into account in the simulation model.Comparison between measured and computed ground level total electrical field and ion current density shows satisfactory agreement.The ion flow field of a ±500 kV HVDC project with bipolar lines on the same tower is simulated.The total electrical field and ion current density on ground level are compared among different line arrangements.
基金the support under A*STAR SERC grant (132-183-0025)
文摘We propose a multi-field implicit finite element method for analyzing the electromechanical behavior of dielectric elastomers. This method is based on a four-field variational principle, which includes displacement and electric potential for the electromechanical coupling analysis, and additional independent fields to address the incompressible constraint of the hyperelastic material. Linearization of the variational form and finite element discretization are adopted for the numerical implementation. A general FEM program framework is devel- oped using C＋＋ based on the open-source finite element library deal.II to implement this proposed algorithm. Numerical examples demonstrate the accuracy, convergence properties, mesh-independence properties, and scalability of this method. We also use the method for eigenvalue analysis of a dielectric elastomer actuator subject to electromechanical loadings. Our finite element implementation is available as an online supplementary material.
基金The National Natural Basic Research Program of China(973 Program) under contract No.2010CB428704
文摘Based on systematized physical, chemical, and biological modules, a multi-species harmful algal bloom （HAB） model coupled with background ecological fields was established. This model schematically embod-ied that HAB causative algal species and the background ecological system, quantified as total biomass, were significantly different in terms of the chemical and biological processes during a HAB while the inter-action between the two was present. The model also included a competition and interaction mechanism between the HAB algal species or populations. The Droop equation was optimized by considering tempera-ture, salinity, and suspended material impact factors in the parameterization of algal growth rate with the nutrient threshold. Two HAB processes in the springs of 2004 and 2005 were simulated using this model. Both simulation results showed consistent trends with corresponding HAB processes observed in the East China Sea, which indicated the rationality of the model. This study made certain progress in modeling HABs, which has great application potential for HAB diagnosis, prediction, and prevention.
基金supported by the National Natural Science Foundation of China(Grant Nos.51661020,11504149,and 11364024)
文摘This work establishes a temperature-controlled sequence function, and a new multi-phase-field model, for liquid- solid-solid multi-phase transformation by coupling the liquid-solid phase transformation model with the solid-solid phase transformation model. Taking an Fe-C alloy as an example, the continuous evolution of a multi-phase transformation is simulated by using this new model. In addition, the growth of grains affected by the grain orientation of the parent phase （generated in liquid-solid phase transformation） in the solid-solid phase transformation is studied. The results show that the morphology of ferrite grains which nucleate at the boundaries of the austenite grains is influenced by the orientation of the parent austenite grains. The growth rate of ferrite grains which nucleate at small-angle austenite grain boundaries is faster than those that nucleate at large-angle austenite grain boundaries. The difference of the growth rate of ferrites grains in different parent phase that nucleate at large-angle austenite grain boundaries, on both sides of the boundaries, is greater than that of ferrites nucleating at small-angle austenite grain boundaries.
文摘Steam injection is a most effective way for improving heavy oil recovery efficiency, and it has academic and practical significance for the mechanism of multi-field synergy oil displacement. Mechanism of “diversified” oil displacement which is obtained by traditional study methods in the exploitation territory of oil and gas fields has both respective roles and mutual cross shortages. To describe and analyze the displacement process of multi-field coupling with exergy transfer can simplify this kind of problem by introducing a unified goal-driving exergy. It needs to use the method of theoretical modeling, numerical simulation and experimental validation to study the basic law of exergy transfer in the oil displacement process of multi-field synergy, make a thorough research for the flooding process of steam injection with exergy transfer theory and reveal the oil displacement mechanism in steam injection of multi-field synergy. Thus the theory instruction and technical support can be provided to improve reservoirs producing degree and extraction ratio.
基金financially supported by the National Natural Science Foundation of China(Grant No.51879049)DK-I Dynamic Positioning System Console Project
文摘The problem of the unmanned surface vessel (USV) path planning in static and dynamic obstacle environments is addressed in this paper. Multi-behavior fusion based potential field method is proposed, which contains three behaviors: goal-seeking, boundary-memory following and dynamic-obstacle avoidance. Then, different activation conditions are designed to determine the current behavior. Meanwhile, information on the positions, velocities and the equation of motion for obstacles are detected and calculated by sensor data. Besides, memory information is introduced into the boundary following behavior to enhance cognition capability for the obstacles, and avoid local minima problem caused by the potential field method. Finally, the results of theoretical analysis and simulation show that the collision-free path can be generated for USV within different obstacle environments, and further validated the performance and effectiveness of the presented strategy.
基金the Basic Science Research Program through the National Research Foundation of Korea (NRF-2014R1A1A2057735)the Kyung Hee University in 2016 [KHU-20160601]
文摘The pursuit problem is a well-known problem in computer science. In this problem, a group of predator agents attempt to capture a prey agent in an environment with various obstacle types, partial observation, and an infinite grid-world. Predator agents are applied algorithms that use the univector field method to reach the prey agent, strategies for avoiding obstacles and strategies for cooperation between predator agents. Obstacle avoidance strategies are generalized and presented through strategies called hitting and following boundary(HFB); trapped and following shortest path(TFSP); and predicted and following shortest path(PFSP). In terms of cooperation, cooperation strategies are employed to more quickly reach and capture the prey agent. Experimental results are shown to illustrate the efficiency of the method in the pursuit problem.
基金supported by the National Natural Science Foundation of China (61074131 and 91132722)the Doctoral Fund of the Ministry of Education of China (21101202110007)
文摘Working memory plays an important role in human cognition. This study investigated how working memory was encoded by the power of multichannel local field potentials （LFPs） based on sparse non negative matrix factorization （SNMF）. SNMF was used to extract features from LFPs recorded from the prefrontal cortex of four SpragueDawley rats during a memory task in a Y maze, with 10 trials for each rat. Then the powerincreased LFP components were selected as working memoryrelated features and the other components were removed. After that, the inverse operation of SNMF was used to study the encoding of working memory in the time frequency domain. We demonstrated that theta and gamma power increased significantly during the working memory task. The results suggested that postsynaptic activity was simulated well by the sparse activity model. The theta and gamma bands were meaningful for encoding working memory.
基金Project supported by the National Natural Science Foundation of China(No.10572054)the Key Project of the National Science Foundation of China(No.11032005)
文摘Nonlinear stability of sensor elastic element- corrugated shallow spherical shell in coupled multi-field is studied. With the equivalent orthotropic parameter obtairled by the author, the corrugated shallow spherical shell is considered as an orthotropic shallow spherical shell, and geometrical nonlinearity and transverse shear deformation are taken into account. Nonlinear governing equations are obtained. The critical load is obtained using a modified iteration method. The effect of temperature variation and shear rigidity variation on stability is analyzed.
基金Project(No.2016ZDJS05B03)supported by Shandong Key ResearchDevelopment Plan,Project(No.17CX06005&No.18CX06054A)supported by Department of Science&Technology of Shandong Province the Fundamental Research Funds for the Central Universities
文摘The PPG PITT-CHAR XP flame retardant system has been used by COOEC to preventing the thermal softening of steel in the high temperature,whose degradation temperature is 80 ℃.To prevent damage to PPG PITT-CHAR XP fire retardant paint from excessive heat during welding,it is necessary to get accurately reserved area near the welding joints prior to welding. For the foregoing reasons,the 80 ℃ temperature field distribution of thick plate multi-pass welding was analyzed with SYSWELD.The influence of welding groove form and time interval on welding temperature field was also analyzed. Results showed that the range of 80 ℃ welding temperature field increased with the increasing of weld layers at first and then it inclined to stable value. Interpass time setting was crucial to control the range of 80 ℃ welding temperature field. It was also found that double V groove had better thermal diffusivity than double-bevel groove.And double-bevel groove was better than single V groove.
基金supported by the Scientific Research Program of the Higher Education Institution of Xinjiang, China (Grant No. XJEDU2012S41)the National Natural Science Foundation of China (Grant No. 10974198)
文摘The accurate theoretical expressions of the mean field operator associated with the multi-configuration time-dependent Hartree-Fock （MCTDHF） method are presented in this paper. By using a theoretical formula, derived without approxima- tion, we can study the multi-electron correlation dynamics accurately. Some illustrative calculations are carried out to check the accuracy of the expression of the mean field operator. The results of illustrative calculations indicate the reliability of the accurate expression of the mean field operator. This theoretical calculation method for the mean field operator may be of considerable help in future studies of the correlated dynamics of many-electron systems in strong laser fields.
文摘The purpose of this study was to grasp current potential problems of dose error in intensity-modulated proton therapy (IMPT) plans. We were interested in dose differences of the Varian Eclipse treatment planning system (TPS) and the fast dose calculation method (FDC) for single-field optimization (SFO) and multi-field optimization (MFO) IMPT plans. In addition, because some authors have reported dosimetric benefit of a proton arc therapy with ultimate multi-fields in recent years, we wanted to evaluate how the number of fields and beam angles affect the differences for IMPT plans. Therefore, for one brain cancer patient with a large heterogeneity, SFO and MFO IMPT plans with various multi-angle beams were planned by the TPS. Dose distributions for each IMPT plan were calculated by both the TPS’s conventional pencil beam algorithm and the FDC. The dosimetric parameters were compared between the two algorithms. The TPS overestimated 400 - 500 cGy (RBE) for minimum dose to the CTV relative to the dose calculated by the FDC. These differences indicate clinically relevant effect on clinical results. In addition, we observed that the maximum difference in dose calculated between the TPS and the FDC was about 900 cGy (RBE) for the right optic nerve, and this quantity also has a possibility to have a clinical effect. The major difference was not seen in calculations for SFO IMPT planning and those for MFO IMPT planning. Differences between the TPS and the FDC in SFO and MFO IMPT plans depend strongly on beam arrangement and the presence of a heterogeneous body. We advocate use of a Monte Carlo method in proton treatment planning to deliver the most precise proton dose in IMPT.
