期刊文献+
共找到2,534篇文章
< 1 2 127 >
每页显示 20 50 100
Parallelization of H.264 Encoder Using FPGA Based Symmetric Multi-Core Processors
1
作者 Murali Krishnan Elumalai Gangadharan Esakki Nirmal Kumar 《通讯和计算机(中英文版)》 2011年第6期476-482,共7页
Digital video technology is burgeoning new standards broadening the gamut of prerequisites such as high definition video quality and more resolution substantially at lower bit rates than previous standards.Among the l... Digital video technology is burgeoning new standards broadening the gamut of prerequisites such as high definition video quality and more resolution substantially at lower bit rates than previous standards.Among the latest video compression algorithms,the newly established H.264 standard has become increasingly popular.However,the high coding efficiency of it comes at the cost of increase in computational complexity which makes the real-time implementation a great challenge.Previous works in video compression implement a dual core DSP processor executing this composite H.264 algorithm in parts,but has certain bottlenecks like timing,reliability and efficiency with a small overhead of synchronization.With higher interprocessor bus speeds,streamlined memory and a highly programmable FPGA multi-core architecture the limitations of current platforms based on DSPs and ASICs can be overwhelmed.This paper presents an FPGA based multicore processor implementation to optimize the H.264 encoder performance between the cores providing scalability,attaining load balance among the cores and parallel execution reducing the dependability of resources.This enables a more effectual use of processing power of the cores. 展开更多
关键词 H.264 DUAL-core encocler multi core
在线阅读 下载PDF
Enrichment of Fetal Nucleated Red Blood Cells by Multi-core Magnetic Composite Particles for Non-invasive Prenatal Diagnosis 被引量:1
2
作者 PAN Ying WANG Qing +7 位作者 HUANG Wen-jun QIAO Feng-1i LIU Yu-ping ZHANG Yu-cheng HAI De-yang DU Ying,ting WANG Wen-yue ZHANG Ai-chen 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2012年第3期443-448,共6页
A novel kind of multi-core magnetic composite particles, the surfaces of which were respectively mo- dified with goat-anti-mouse IgG and antitransferrin receptor(anti-CD71), was prepared. The fetal nucleated red blo... A novel kind of multi-core magnetic composite particles, the surfaces of which were respectively mo- dified with goat-anti-mouse IgG and antitransferrin receptor(anti-CD71), was prepared. The fetal nucleated red blood cells(FNRBCs) in the peripheral blood of a gravida were rapidly and effectively enriched and separated by the mo- dified multi-core magnetic composite particles in an external magnetic field. The obtained FNRBCs were used for the identification of the fetal sex by means of fluorescence in situ hybridization(FISH) technique. The results demonstrate that the multi-core magnetic composite particles meet the requirements for the enrichment and speration of FNRBCs with a low concentration and the accuracy of detetion for the diagnosis of fetal sex reached to 95%. Moreover, the obtained FNRBCs were applied to the non-invasive diagnosis of Down syndrome and chromosome 3p21 was de- tected. The above facts indicate that the novel multi-core magnetic composite particles-based method is simple, relia- ble and cost-effective and has opened up vast vistas for the potential application in clinic non-invasive prenatal diag- nosis. 展开更多
关键词 Fetal nucleated red blood cell(FNRBC) Prenatal diagnosis NON-INVASIVE multi-core magnetic compositeparticle
在线阅读 下载PDF
Variation-Aware Task Mapping on Homogeneous Fault-Tolerant Multi-Core Network-on-Chips
3
作者 Chengbo Xue Yougen Xu +1 位作者 Yue Hao Wei Gao 《Journal of Beijing Institute of Technology》 EI CAS 2019年第3期497-509,共13页
A variation-aware task mapping approach is proposed for a multi-core network-on-chips with redundant cores, which includes both the design-time mapping and run-time scheduling algorithms. Firstly, a design-time geneti... A variation-aware task mapping approach is proposed for a multi-core network-on-chips with redundant cores, which includes both the design-time mapping and run-time scheduling algorithms. Firstly, a design-time genetic task mapping algorithm is proposed during the design stage to generate multiple task mapping solutions which cover a maximum range of chips. Then, during the run, one optimal task mapping solution is selected. Additionally, logical cores are mapped to physically available cores. Both core asymmetry and topological changes are considered in the proposed approach. Experimental results show that the performance yield of the proposed approach is 96% on average, and the communication cost, power consumption and peak temperature are all optimized without loss of performance yield. 展开更多
关键词 process VARIATION TASK mapping FAULT-TOLERANT network-on-chips multi-core
在线阅读 下载PDF
Theoretical Analysis on Inter-Core Crosstalk Suppression Model for Multi-Core Fiber
4
作者 Jiajing Tu Xueqin Xie Keping Long 《China Communications》 SCIE CSCD 2016年第8期192-197,共6页
Decreasing mode coupling coefficient(κ) is an effective approach to suppress the inter-core crosstalk. Therefore, we deploy a low index rod and rectangle trench in the middle of two neighboring cores to reduce κ so ... Decreasing mode coupling coefficient(κ) is an effective approach to suppress the inter-core crosstalk. Therefore, we deploy a low index rod and rectangle trench in the middle of two neighboring cores to reduce κ so that the overlap of electric field distribution can be suppressed. We also propose approximate analytical solution(AAS) for κ of two crosstalk suppression models, which are two cores with one low index rod deployed in the middle and two cores with one low index rectangle trench deployed in the middle. We then do some modification for the results obtained by AAS and the modified results are proved to agree well with that obtained by finite element method(FEM). Therefore, we can use the modified AAS to get inter-core crosstalk for abovementioned two models quickly. 展开更多
关键词 multi-core fiber CROSSTALK mode coupling coefficient
在线阅读 下载PDF
Modeling of Few-Mode Multi-Core Optical Fiber Channel Based on Non-Uniform Mode Field Distribution
5
作者 Hang Zhou Bo Liu +6 位作者 Fu Wang Dandan Song Li Li Xiangjun Xin Qinghua Tian Qi Zhang Feng Tian 《China Communications》 SCIE CSCD 2016年第8期184-191,共8页
In this paper, the influencing factors that affect few-mode and multi core optical fiber channel are analyzed in a comprehensive way. The theoretical modeling and computer simulation of the information channel are car... In this paper, the influencing factors that affect few-mode and multi core optical fiber channel are analyzed in a comprehensive way. The theoretical modeling and computer simulation of the information channel are carried out and then the modeling scheme of few-mode multicore optical fiber channel based on non-uniform mode field distribution is put forward. The proposed modeling scheme can not only exponentially increases the system capacity through fewmode multi-core optical fiber channel, but has better transmission performance compared to the channel of the same type to the uniform channel revealing from the simulation results. 展开更多
关键词 few-mode multi-core optical fiber channel non-uniform channel channel modeling
在线阅读 下载PDF
RF-TSV DESIGN, MODELING AND APPLICATION FOR 3D MULTI-CORE COMPUTER SYSTEMS
6
作者 Yu Le Yang Haigang Xie Yuanlu 《Journal of Electronics(China)》 2012年第5期431-444,共14页
The state-of-the-art multi-core computer systems are based on Very Large Scale three Dimensional (3D) Integrated circuits (VLSI). In order to provide high-speed vertical data transmission in such 3D systems, efficient... The state-of-the-art multi-core computer systems are based on Very Large Scale three Dimensional (3D) Integrated circuits (VLSI). In order to provide high-speed vertical data transmission in such 3D systems, efficient Through-Silicon Via (TSV) technology is critically important. In this paper, various Radio Frequency (RF) TSV designs and models are proposed. Specifically, the Cu-plug TSV with surrounding ground TSVs is used as the baseline structure. For further improvement, the dielectric coaxial and novel air-gap coaxial TSVs are introduced. Using the empirical parameters of these coaxial TSVs, the simulation results are obtained demonstrating that these coaxial RF-TSVs can provide two-order higher of cut-off frequencies than the Cu-plug TSVs. Based on these new RF-TSV technologies, we propose a novel 3D multi-core computer system as well as new architectures for manipulating the interfaces between RF and baseband circuit. Taking into consideration the scaling down of IC manufacture technologies, predictions for the performance of future generations of circuits are made. With simulation results indicating energy per bit and area per bit being reduced by 7% and 11% respectively, we can conclude that the proposed method is a worthwhile guideline for the design of future multi-core computer ICs. 展开更多
关键词 Three Dimensional (3D) Very Large Scale Integrated circuits (VLSI) Ratio Frequency (RF) Through-Silicon Vias (TSVs) multi-core computer technology
在线阅读 下载PDF
A 3D Nonhydrostatic Compressible Atmospheric Dynamic Core by Multi-moment Constrained Finite Volume Method 被引量:4
7
作者 Qingchang QIN Xueshun SHEN +3 位作者 Chungang CHEN Feng XIAO Yongjiu DAI Xingliang LI 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2019年第10期1129-1142,共14页
A 3D compressible nonhydrostatic dynamic core based on a three-point multi-moment constrained finite-volume (MCV) method is developed by extending the previous 2D nonhydrostatic atmospheric dynamics to 3D on a terrain... A 3D compressible nonhydrostatic dynamic core based on a three-point multi-moment constrained finite-volume (MCV) method is developed by extending the previous 2D nonhydrostatic atmospheric dynamics to 3D on a terrainfollowing grid. The MCV algorithm defines two types of moments: the point-wise value (PV) and the volume-integrated average (VIA). The unknowns (PV values) are defined at the solution points within each cell and are updated through the time evolution formulations derived from the governing equations. Rigorous numerical conservation is ensured by a constraint on the VIA moment through the flux form formulation. The 3D atmospheric dynamic core reported in this paper is based on a three-point MCV method and has some advantages in comparison with other existing methods, such as uniform third-order accuracy, a compact stencil, and algorithmic simplicity. To check the performance of the 3D nonhydrostatic dynamic core, various benchmark test cases are performed. All the numerical results show that the present dynamic core is very competitive when compared to other existing advanced models, and thus lays the foundation for further developing global atmospheric models in the near future. 展开更多
关键词 multi-moment CONSTRAINED FINITE-VOLUME method NONHYDROSTATIC dynamic core topography height-based terrain-following coordinate
在线阅读 下载PDF
Improved DES on Heterogeneous Multi-core Architecture
8
作者 Zhenshan Bao Chong Chen Wenbo Zhang 《国际计算机前沿大会会议论文集》 2018年第1期34-34,共1页
在线阅读 下载PDF
基于任务同步的异构多核实时系统节能调度算法
9
作者 赵小松 黄超 +1 位作者 李鉴 康玉龙 《计算机科学》 北大核心 2026年第1期241-251,共11页
目前,多核实时系统中同步任务的节能调度研究主要针对的是同构多核处理器平台,而异构多核处理器架构能够更有效地发挥系统性能。将现有的研究直接应用于异构多核系统,在保证可调度性的情况下会导致能耗变高。对此,通过使用动态电压与频... 目前,多核实时系统中同步任务的节能调度研究主要针对的是同构多核处理器平台,而异构多核处理器架构能够更有效地发挥系统性能。将现有的研究直接应用于异构多核系统,在保证可调度性的情况下会导致能耗变高。对此,通过使用动态电压与频率调节(Dynamic Voltage Frequency Scaling,DVFS)技术,研究异构多核实时系统中基于任务同步的节能调度问题,提出同步感知的最大能耗节省优先算法(Synchronization Aware-Largest Energy Saved First,SA-LESF)。该算法针对所有任务的速度配置进行迭代优化,直至所有任务均达到其最大限度节能的速度配置。此外,进一步提出基于动态松弛时间回收的同步感知最大能耗节省优先算法(Synchronization Aware-Largest Energy Saved First with Dynamic Reclamation,SA-LESF-DR)。该算法在保证实时任务可调度的同时,实施相应的回收策略,进一步降低系统能耗。实验结果表明,SA-LESF与SA-LESF-DR算法在能耗表现上具有优势,在相同任务集下,相比其他算法可节省高达30%的能耗。 展开更多
关键词 实时系统 异构多核处理器 任务同步 节能调度
在线阅读 下载PDF
基于YOLOv11框架的多尺度特征协同与情景感知遥感目标检测算法
10
作者 崔丽群 褚如波 金海波 《地球信息科学学报》 北大核心 2026年第2期420-435,共16页
【目的】本文旨在提升高分辨率遥感图像的目标检测性能,针对小目标检测、复杂背景处理和密集目标分布等关键问题,提出了一种解决方案。【方法】本文基于YOLOv11框架,提出了一种融合多尺度特征协同与情景感知的遥感目标检测方法。设计了... 【目的】本文旨在提升高分辨率遥感图像的目标检测性能,针对小目标检测、复杂背景处理和密集目标分布等关键问题,提出了一种解决方案。【方法】本文基于YOLOv11框架,提出了一种融合多尺度特征协同与情景感知的遥感目标检测方法。设计了3个创新模块:(1)多核特征融合模块(Parallel Kernel Feature Fusion Module,PKFFM),用于跨尺度特征整合以增强表示能力;(2)级联双分支注意力模块(Cascaded Dual-Branch Attention Module,CDBAM),通过突出相关空间和通道信息优化特征提取;(3)情景感知模块(Scenario-Aware Module,SAM),增强网络捕获全局上下文信息的能力。此外,引入了RS-WIoU(Remote Sensing Wise Intersection over Union)损失函数,以更好地适应高分辨率遥感数据,进一步提升检测性能。【结果】为验证本文方法的有效性,本文在高分辨率遥感数据集TGRS-HRRSD、NWPU VHR-10和DOTA-v1.0上进行实验。实验结果表明,本文方法在各数据集上的平均精度(mP)分别达到97.3%、87.3%和84.3%,相较于基线模型YOLOv11,精度分别提升2.1%、3.8%和2.9%,mAP_(50-95)分别提升3.0%、1.2%和1.5%;此外,本文模型展现出轻量化特性和强鲁棒性,优于其他遥感目标检测算法。【结论】本文方法通过PKFFM、CDBAM、SAM以及RS-WIoU损失函数的协同作用,显著提升了高分辨率遥感图像目标检测的精度与鲁棒性,为遥感影像目标检测提供了高效的解决方案。未来可进一步探索这些模块在其他数据集和任务中的适用性,以提升模型的泛化能力并推动遥感技术的进步。 展开更多
关键词 高分辨率图像 目标检测 YOLOv11框架 多核特征融合 级联双分支注意力 情景感知 RS-WIoU损失函数
原文传递
镶套多向顺序抽芯及自动脱螺纹注塑模具设计
11
作者 陈亚洲 荣星 蔡部林 《工程塑料应用》 北大核心 2026年第2期138-146,共9页
某塑料接头内部设计了3组互相垂直贯通孔的结构。在塑件一个端面,分布的2个贯通孔、2个盲孔方向一致,与另外1个贯通孔方向呈一定夹角,为此设计了镶套2个方向的复合抽芯机构,解决了空间狭小、抽芯运动受限、机构相互干涉的问题,利用斜导... 某塑料接头内部设计了3组互相垂直贯通孔的结构。在塑件一个端面,分布的2个贯通孔、2个盲孔方向一致,与另外1个贯通孔方向呈一定夹角,为此设计了镶套2个方向的复合抽芯机构,解决了空间狭小、抽芯运动受限、机构相互干涉的问题,利用斜导柱、弯销分别驱动两组抽芯机构运动,实现了准确的顺序控制。在塑件另一垂直端面,分布了3个方向一致的贯通孔,一个为阶梯孔,另2个孔内有Rc1/8-LH管螺纹,为此设计了液压马达驱动自动脱螺纹机构。为防止螺纹型芯、料头杆旋转时,与其支撑件的配合面摩擦而磨损,设计了动模板与脱模机构固定板之间第1次开模距离1 mm,使得启动脱螺纹时,螺纹型芯、料头杆能够快速后退1 mm,与其支撑件的配合面脱离;定模板与动模板之间第2次开模距离为7 mm,达到解锁定距开闭器目的,使得脱模机构固定板可活动;塑件对阶梯型芯的包紧力与脱螺纹作用力方向相反,为解决脱螺纹时塑件被拉坏的问题,设计了在脱模机构固定板与动模垫板之间第3次开模距离6 mm,让固定于动模垫板的阶梯型芯脱离塑件;在定模板与动模板之间继续第4次开模,驱动复合抽芯机构完成抽芯动作,直至开模完成。为保证模具的各项功能实施,设计了纯机械结构控制的3位4次开模顺序,加工制造成本低,安装调试简单方便。塑件材质为质量分数60%玻璃纤维增强聚己内酰胺,其表面容易产生浮纤,为此设计了合理的进浇系统、排气系统及冷却系统,以保证塑件产品质量。 展开更多
关键词 多向顺序抽芯 自动脱螺纹机构 注塑模具
在线阅读 下载PDF
融合多关系异构图和语义特征的核心专利预测方法
12
作者 邓娜 纪媛琳 胡云川 《情报杂志》 北大核心 2026年第1期83-90,共8页
[目的]随着专利数量的爆发式增长,专利间关系日益复杂,现有核心专利预测方法仅依赖单一专利关系网络,难以有效捕捉专利间的多维关联,且未能综合专利的文本信息。因此,实现一种能融合多维度特征的核心专利预测方法具有重要意义。[方法]... [目的]随着专利数量的爆发式增长,专利间关系日益复杂,现有核心专利预测方法仅依赖单一专利关系网络,难以有效捕捉专利间的多维关联,且未能综合专利的文本信息。因此,实现一种能融合多维度特征的核心专利预测方法具有重要意义。[方法]提出一种融合多关系异构图与语义特征的核心专利预测方法。通过构建多关系异构图整合专利间技术共现、共享发明人以及权利要求语义相似多维度关系,并融合XLnet提取的专利摘要语义特征,最终利用MLP分类器实现核心专利预测。[结果/结论]实验结果表明,在通信产业领域的专利数据集上,方法的Precision、Recall、Macro F1以及AUC分数分别达到0.8562、0.8210、0.8059、0.8260,超越了其他4个对比方法,证明了方法的有效性,能为核心专利预测提供新的参考和思路。 展开更多
关键词 核心专利预测 多关系异构图 特征融合 RGCN XLnet
在线阅读 下载PDF
关键核心技术创新系统特征与演化研究--“知识-技术-产业”多层耦合网络系统解构
13
作者 余谦 董冰雪 刘念 《科技进步与对策》 北大核心 2026年第2期24-36,共13页
关键核心技术创新突破涉及知识、技术、产业等子系统及其相互间的复杂关联,其关键挑战在于如何使创新资源有效耦合于技术研发需求。首先,界定关键核心技术内涵。其次,以“基础知识创新—技术原理突破—技术产业化”为核心逻辑,从多层耦... 关键核心技术创新突破涉及知识、技术、产业等子系统及其相互间的复杂关联,其关键挑战在于如何使创新资源有效耦合于技术研发需求。首先,界定关键核心技术内涵。其次,以“基础知识创新—技术原理突破—技术产业化”为核心逻辑,从多层耦合网络视角描述关键核心技术“知识—技术—产业”耦合创新系统,解构系统内部结构和系统网络特征。在明确关键核心技术内涵和系统特征的基础上,提出一种基于多层耦合创新网络分析的关键核心技术识别方法,该方法融合复杂网络拓扑特征测度、高阶等变模型和多PageRank中心性算法。最后,探讨关键核心技术“知识—技术—产业”耦合创新系统在生命周期不同阶段的演变特征和临界条件,提出促进关键核心技术突破的政策建议。 展开更多
关键词 多层耦合网络 关键核心技术 “知识—技术—产业”创新系统 技术识别 技术生命周期
在线阅读 下载PDF
面向国产多核DSP的张量转置并行优化技术
14
作者 刘根程 王庆林 +6 位作者 洪楚河 彭兴 夏睿 梁亚玲 张庆阳 车永刚 刘杰 《计算机研究与发展》 北大核心 2026年第2期419-433,共15页
张量转置(tensor transposition)作为基础张量运算原语,广泛应用于信号处理、科学计算以及深度学习等各种领域,在张量数据密集型应用及高性能计算中具有重要作用。随着能效指标在高性能计算系统中的重要性日益凸显,基于数字信号处理器(d... 张量转置(tensor transposition)作为基础张量运算原语,广泛应用于信号处理、科学计算以及深度学习等各种领域,在张量数据密集型应用及高性能计算中具有重要作用。随着能效指标在高性能计算系统中的重要性日益凸显,基于数字信号处理器(digital signal processors,DSPs)的加速器已被集成至通用计算系统。然而,传统面向多核CPU和GPU的张量转置库因架构差异无法充分适配DSP架构。一方面,DSP架构的向量化计算潜力尚未得到充分挖掘;另一方面,其复杂的片上存储体系与多层次共享内存结构为张量并行程序设计带来了显著挑战。针对国产多核DSP的架构特点,提出ftmTT算法,并设计实现了一个面向多核DSP架构的通用张量转置库。ftmTT算法通过设计适配DSP架构的高效内存访问模式充分挖掘其并行化和向量化潜力,其核心创新包括:1)采用分块策略将高维张量转置转化为多核DSP平台所提供的矩阵转置内核操作;2)提出基于DMA点对点传输的张量数据块访存合并方案来降低数据搬运开销;3)通过双缓冲设计异步重叠转置计算与DMA传输实现计算通信隐藏,最终面向多核DSP实现高性能并行张量转置。在国产多核DSP平台FT-M7032的实验表明,ftmTT张量转置算法取得了最高达理论带宽75.96%的性能,达到FT-M7032平台STREAM带宽99.23%的性能。 展开更多
关键词 张量转置 DMA传输 多核DSP 向量化 访存合并
在线阅读 下载PDF
多芯光纤分布式振动传感系统入侵定位性能研究
15
作者 王佳蓓 顾宏灿 +2 位作者 姚高飞 刘文 黄俊斌 《海军工程大学学报》 北大核心 2026年第1期85-90,共6页
多芯光纤具有多个独立通道并行传感的特点,可通过其实现信号的空分复用,有效降低单芯光纤分布式振动传感系统的噪声水平、提升信号信噪比。本文首先从理论上验证了信号累加对提升信噪比的有效性,以及累加个数与信噪比增益呈指数关系;然... 多芯光纤具有多个独立通道并行传感的特点,可通过其实现信号的空分复用,有效降低单芯光纤分布式振动传感系统的噪声水平、提升信号信噪比。本文首先从理论上验证了信号累加对提升信噪比的有效性,以及累加个数与信噪比增益呈指数关系;然后,建立了多芯光纤零差探测型分布式振动传感系统,将探测光分为三束,分别注入多芯光纤的3个纤芯中同时并行传感;最后,对三芯解调信号进行累加,分析累加前后系统的探测性能。实验结果表明:与传统单通道零差探测系统相比,三芯信号的空分复用有效降低了系统噪声水平,信号信噪比提升了4.69 dB,扰动定位的均方根误差为0.52 m。可见,多芯光纤具备的多路信号空分复用的优势,为分布式光纤振动传感系统的发展提供了新方向。 展开更多
关键词 多芯光纤 分布式振动传感 信噪比 空分复用 扰动定位
在线阅读 下载PDF
基于JPEG-LS的多核压缩成像系统
16
作者 刘赫 张刘 +2 位作者 李桂阳 沈桑渊 章家保 《光学精密工程》 北大核心 2026年第1期139-149,共11页
针对小卫星的高分辨率航天CMOS相机硬件成本受限、数据存储资源紧张的问题,提出了一种基于现场可编程门阵列(Field Programmable Gate Array,FPGA)的JPEG-LS图像压缩算法实现方案,通过并行分组模式在单片FPGA上构建了多核实时压缩成像... 针对小卫星的高分辨率航天CMOS相机硬件成本受限、数据存储资源紧张的问题,提出了一种基于现场可编程门阵列(Field Programmable Gate Array,FPGA)的JPEG-LS图像压缩算法实现方案,通过并行分组模式在单片FPGA上构建了多核实时压缩成像系统。利用FPGA接收CMOS探测器输出的多通道高速图像数据,采用十一级流水线实现JPEG-LS图像压缩算法,并计算其编码参数和优化上下文更新部分的结构,以缩短关键路径。最后,利用多个JPEG-LS图像压缩核对CMOS探测器输出的多通道高速图像数据进行分组并行压缩。实验结果表明,在当前系统中,改进后的JPEG-LS图像压缩核最高运行频率为46 MHz,压缩参数near为1时,系统近似于无损压缩且压缩比大于4,解压图像的峰值信噪比为50 dB左右,基本满足遥感图像压缩速率和质量需求。本文为具有图像压缩功能的高分辨率航天CMOS相机设计提供了参考。 展开更多
关键词 图像压缩 CMOS探测器 现场可编程门阵列 流水线设计 多核压缩成像
在线阅读 下载PDF
Propagation characteristics of six-core photonic liquid crystal fibers 被引量:1
17
作者 刘晓颀 刘永军 +3 位作者 孙伟民 姜宇 闫奇 于海娇 《Optoelectronics Letters》 EI 2012年第2期125-128,共4页
We demonstrate a new kind of multi-core photonic liquid crystal fibers (PLCFs) which have six liquid crystal cores arrayed in the ring-type geometry and separated by the air holes. Through analyzing the structure of t... We demonstrate a new kind of multi-core photonic liquid crystal fibers (PLCFs) which have six liquid crystal cores arrayed in the ring-type geometry and separated by the air holes. Through analyzing the structure of this kind of PLCFs, it can be found that they have the ability to resist the structure deformation. Due to the effective index of the liquid crystal can be adjusted by temperature and wavelength, the energy in the six liquid crystal cores is increased with the temperature increasing and wavelength decreasing. The effective index of the PLCFs is decreased, the effective fundamental mode area is increased and the dispersion properties are gently affected with the wavelength increasing and temperature decreasing. 展开更多
关键词 Crystal whiskers Air holes Dispersion properties Effective index Fundamental modes LIQUID crystal fibers multi core Propagation characteristics Structure deformation
原文传递
高并行性能Intel Core i7多核处理器及其关键技术研究
18
作者 王文义 王杰 《中原工学院学报》 CAS 2011年第5期23-26,共4页
介绍了Intel Nehalem多核处理器微架构的组成及其独特的三级缓存模式,同时针对并行计算机对处理器在计算性能(Gflops)和能耗比(Mflop/W)两方面的特殊要求,介绍了Nehalem Core i7处理器所采用的一些关键技术,如超线程,QPI总线,内核加速... 介绍了Intel Nehalem多核处理器微架构的组成及其独特的三级缓存模式,同时针对并行计算机对处理器在计算性能(Gflops)和能耗比(Mflop/W)两方面的特殊要求,介绍了Nehalem Core i7处理器所采用的一些关键技术,如超线程,QPI总线,内核加速模式和SSE4.2指令集等,这些技术对高效使用并行计算机是非常必要的. 展开更多
关键词 Nehalem微架构 多核多线程处理器 超线程技术 QPI总线
在线阅读 下载PDF
基于多核DSP的调频连续波激光测距信号增强处理方法
19
作者 牟昭然 《工业控制计算机》 2026年第1期107-109,共3页
调频连续波激光测距过程中,受到外界环境影响,导致激光测距信号传输稳定性差,造成激光测距误差。为此,提出基于多核DSP的调频连续波激光测距信号增强处理方法。首先,结合多核DSP的强大计算能力,对信号进行采集与预处理,利用自适应滤波... 调频连续波激光测距过程中,受到外界环境影响,导致激光测距信号传输稳定性差,造成激光测距误差。为此,提出基于多核DSP的调频连续波激光测距信号增强处理方法。首先,结合多核DSP的强大计算能力,对信号进行采集与预处理,利用自适应滤波算法对调频连续波激光测距信号进行异常信号去噪,提升信号质量,减少干扰对传输稳定性的影响;异常信号清除后,对薄弱信号进行恢复与增强,最终,输出调频连续波激光测距信号的增强处理结果。实验结果表明:基于多核DSP的调频连续波激光测距信号增强处理方法能够有效提高测距精度、抗干扰能力和信号增强处理效率,为调频连续波激光测距技术的广泛应用提供了有力支持。 展开更多
关键词 调频连续波 激光测距 信号处理 多核DSP 信号增强
在线阅读 下载PDF
基于多尺度特征增强和时序Transformer的SiC外延生长浓度预测模型
20
作者 张忠义 王朗 +6 位作者 芦伟立 李帅 杨建业 高楠 王波 潘国平 房玉龙 《硅酸盐学报》 北大核心 2026年第1期35-48,共14页
碳化硅(SiC)外延层掺杂浓度直接决定功率器件性能,现有调控依赖人工经验与离线测试,存在成本高、滞后性强的问题。为此,提出一种多尺度特征增强时序Transformer(Multi-scale Feature-enhanced Temporal Transformer Network,MFT-Net)模... 碳化硅(SiC)外延层掺杂浓度直接决定功率器件性能,现有调控依赖人工经验与离线测试,存在成本高、滞后性强的问题。为此,提出一种多尺度特征增强时序Transformer(Multi-scale Feature-enhanced Temporal Transformer Network,MFT-Net)模型,整合多尺度卷积、压缩和激励(SE)模块、Transformer及门控循环单元(GRU)模块,构建“当炉-下炉”双场景浓度预测体系。多尺度卷积捕捉毫秒至小时级参数动态,SE强化核心特征,Transformer建模全参数耦合,GRU传递跨炉状态。基于1200炉数据实验表明,模型当炉预测相对误差低至1.35%、决定系数R_(2)达0.89,下炉预测相对误差为1.66%,R_(2)达到0.87,显著优于传统模型。经统计,该模型预计可降低离线测试成本约30%、提升工艺稳定性约15%,为SiC外延智能化提供支撑。 展开更多
关键词 碳化硅外延生长 核心层掺杂浓度 多尺度卷积 TRANSFORMER 工艺参数预测 深度学习
原文传递
上一页 1 2 127 下一页 到第
使用帮助 返回顶部