Micro-gas turbine engine（MTE） rotor is an important indicator of its property, therefore, the manufacturing technology of the microminiature rotor has become a hot area of research at home and abroad. At present, th...Micro-gas turbine engine（MTE） rotor is an important indicator of its property, therefore, the manufacturing technology of the microminiature rotor has become a hot area of research at home and abroad. At present, the main manufacturing technologies of the MTE rotor are directed forming fabrication technologies. However, these technologies have a series of problems, such as complex processing technology high manufacturing cost, and low processing efficiency, and so on. This paper takes advantage of micro electric discharge machining（micro-EDM） in the field of microminiature molds manufacturing, organizes many processing technologies of micro-EDM reasonably to improve processing accuracy, presents an integrated micro-EDM technology and its process flow to fabricate MTE rotor die, and conducts a series of experiments to verify efficiency of this integrated micro-EDM. The experiments results show that the MTE rotor die has sharp outline and ensure the good consistency of MTE rotor blades. Meanwhile, the MTE rotor die is applied to micro extrusion equipment, and technologies of micro-EDM and micro forming machining are combined based on the idea of the molds manufacturing, so the MTE rotor with higher aspect ratio and better consistency of blades can be manufactured efficiently. This research presents an integrated micro-EDM technology and its process flow, which promotes the practical process of MTE effectively.展开更多
The main purpose of this study is to characterize the surface sediments of the Kokumbo artisanal gold mining sites in Metallic trace Elements (MTEs). A total of 12 samples of surface water sediments were collected for...The main purpose of this study is to characterize the surface sediments of the Kokumbo artisanal gold mining sites in Metallic trace Elements (MTEs). A total of 12 samples of surface water sediments were collected for this study. The samples were analyzed using the Atomic Absorption Spectrophotometer (AAS). The mean concentrations of Mn (611.37 mg/kg) and Zn (955.86 mg/kg) in the sediments were very high compared to the standard in unpolluted sediments. The enrichment factor (EF) shows that there is an enrichment of Mn at some sites (EF (Mn) > 2). The presence of As, Mn, and Zn is also highlighted by the geo-accumulation index (I-geo) which shows slight pollution in Mn (0 < I-geo (Mn) < 1) on some sites. Moderate pollution for As (1 < I-geo (As) < 2) was determined at the treatment site and high pollution in Zn at some sites in the area (I-geo (Zn) > 3). This study shows that the presence of Zn in the sediments is linked to artisanal gold mining activities. Indeed, Zn is much used for gold recovery. The statistical analysis (PCA) shows, on the one hand, natural mineralization of the sediments and addition of metals linked to anthropic activities corresponding to the erosion of mining discharges. The surface sediments of the Kokumbo mining sites show pollution in As, Mn, and Zn.展开更多
Contamination of the aquatic environment by Metallic Trace Elements (MTE) is a major problem encountered in our environment today. In Côte d’Ivoire, in some municipals, residential and industrial areas in the ci...Contamination of the aquatic environment by Metallic Trace Elements (MTE) is a major problem encountered in our environment today. In Côte d’Ivoire, in some municipals, residential and industrial areas in the city of Abidjan, waste water of worrying quantity is discharged into the rainwater drainage channels which flow directly into the Ebrié lagoon. In order to identify the origin of the pollution by metallic trace elements (MTE) transported by this water, samples of wastewater were collected and then analyzed. ICP-MS was used for MTE (Cu, Fe, Zn, Al, Pb, Cd) analyses and results were statistically processed in multivariate form using PCA and Excel. The results showed high concentrations of metals, with the exception of Cd. The typological structure represents 85.74% of the total information for the MTE. Plan F1 represents 63.90% of the variance and describes water pollution by copper (0.95), zinc (0.90), iron (0.84) and aluminum (0.84). Plan F2 represents 21.84% and describes the enrichment of water with lead (0.84). It seems more than necessary to make manufacturers aware of the need to install wastewater treatment systems in order to avoid their discharge into the environment.展开更多
Spontaneous polarization due to symmetry breaking in the transition metal ditellurides(MTe_(2))family exhibits intriguing sliding ferroelectricity.Although theoretical predictions of MTe_(2)ferroelectric metals with n...Spontaneous polarization due to symmetry breaking in the transition metal ditellurides(MTe_(2))family exhibits intriguing sliding ferroelectricity.Although theoretical predictions of MTe_(2)ferroelectric metals with noncentrosymmetric stacking have been reported,the realization of such polarization structure remains a challenge.Here,we demonstrate the synthesis of PtTe_(2)with non-centrosymmetric stacking layers,in contrast to bulk AA stacking,achieved within a scanning transmission electron microscope(STEM)by irradiating amorphous PtxTeythin flms with an electron beam probe.Cross-sectional STEM imaging combined with frst-principles calculations reveals that the diverse stacking confgurations due to an intralayerπ-stacking system break centrosymmetry in PtTe_(2),giving rise to the out-of-plane polarization.Three-dimensional atomic positions identifed by the atomic electron tomography method further demonstrate the local distortions associated with the non-centrosymmetric stacking layers in PtTe_(2).The understanding of the atomic origin of polarization in PtTe_(2)is of signifcant importance for developing devices that integrate ferroelectricity with metallicity.展开更多
An effect of the swirling flow on the combustion performance is studied by the computational fluid dynamics(CFD) in a micro-gas turbine with a centrifugal compressor, dump diffuser and forward-flow combustor. The dist...An effect of the swirling flow on the combustion performance is studied by the computational fluid dynamics(CFD) in a micro-gas turbine with a centrifugal compressor, dump diffuser and forward-flow combustor. The distributions of air mass and the Temperature Pattern Factor(as: Overall Temperature Distribution Factor-OTDF) in outlet are investigated with two different swirling angles of compressed air as 0° and 15° in three combustors. The results show that the influences of swirling flow on the air distribution and OTDF cannot be neglected. Compared with no-swirling flow, the air through outer liner is more, and the air through the inner liner is less, and the pressure loss is bigger under the swirling condition in the same combustor. The Temperature Pattern Factor changes under the different swirling conditions.展开更多
基金Supported by National Basic Research Program of China(973 Program,Grant No.2012CB934102)National Natural Science Foundation of China(Grant No.50835002)National Science Foundation for Young Scientists of China(Grant No.51105111)
文摘Micro-gas turbine engine（MTE） rotor is an important indicator of its property, therefore, the manufacturing technology of the microminiature rotor has become a hot area of research at home and abroad. At present, the main manufacturing technologies of the MTE rotor are directed forming fabrication technologies. However, these technologies have a series of problems, such as complex processing technology high manufacturing cost, and low processing efficiency, and so on. This paper takes advantage of micro electric discharge machining（micro-EDM） in the field of microminiature molds manufacturing, organizes many processing technologies of micro-EDM reasonably to improve processing accuracy, presents an integrated micro-EDM technology and its process flow to fabricate MTE rotor die, and conducts a series of experiments to verify efficiency of this integrated micro-EDM. The experiments results show that the MTE rotor die has sharp outline and ensure the good consistency of MTE rotor blades. Meanwhile, the MTE rotor die is applied to micro extrusion equipment, and technologies of micro-EDM and micro forming machining are combined based on the idea of the molds manufacturing, so the MTE rotor with higher aspect ratio and better consistency of blades can be manufactured efficiently. This research presents an integrated micro-EDM technology and its process flow, which promotes the practical process of MTE effectively.
文摘The main purpose of this study is to characterize the surface sediments of the Kokumbo artisanal gold mining sites in Metallic trace Elements (MTEs). A total of 12 samples of surface water sediments were collected for this study. The samples were analyzed using the Atomic Absorption Spectrophotometer (AAS). The mean concentrations of Mn (611.37 mg/kg) and Zn (955.86 mg/kg) in the sediments were very high compared to the standard in unpolluted sediments. The enrichment factor (EF) shows that there is an enrichment of Mn at some sites (EF (Mn) > 2). The presence of As, Mn, and Zn is also highlighted by the geo-accumulation index (I-geo) which shows slight pollution in Mn (0 < I-geo (Mn) < 1) on some sites. Moderate pollution for As (1 < I-geo (As) < 2) was determined at the treatment site and high pollution in Zn at some sites in the area (I-geo (Zn) > 3). This study shows that the presence of Zn in the sediments is linked to artisanal gold mining activities. Indeed, Zn is much used for gold recovery. The statistical analysis (PCA) shows, on the one hand, natural mineralization of the sediments and addition of metals linked to anthropic activities corresponding to the erosion of mining discharges. The surface sediments of the Kokumbo mining sites show pollution in As, Mn, and Zn.
文摘Contamination of the aquatic environment by Metallic Trace Elements (MTE) is a major problem encountered in our environment today. In Côte d’Ivoire, in some municipals, residential and industrial areas in the city of Abidjan, waste water of worrying quantity is discharged into the rainwater drainage channels which flow directly into the Ebrié lagoon. In order to identify the origin of the pollution by metallic trace elements (MTE) transported by this water, samples of wastewater were collected and then analyzed. ICP-MS was used for MTE (Cu, Fe, Zn, Al, Pb, Cd) analyses and results were statistically processed in multivariate form using PCA and Excel. The results showed high concentrations of metals, with the exception of Cd. The typological structure represents 85.74% of the total information for the MTE. Plan F1 represents 63.90% of the variance and describes water pollution by copper (0.95), zinc (0.90), iron (0.84) and aluminum (0.84). Plan F2 represents 21.84% and describes the enrichment of water with lead (0.84). It seems more than necessary to make manufacturers aware of the need to install wastewater treatment systems in order to avoid their discharge into the environment.
基金supported by the National Key R&D Program of China(Grant Nos.2024YFA1208201,2022YFA1403000,and 2021YFA1400204)the National Natural Science Foundation of China(Grant Nos.52322311,12334001,52427802,12174432,12250710675,and 52461160301)the support from Guangdong Provincial Key Laboratory of Magnetoelectric Physics and Devices(Grant No.2022B1212010008)。
文摘Spontaneous polarization due to symmetry breaking in the transition metal ditellurides(MTe_(2))family exhibits intriguing sliding ferroelectricity.Although theoretical predictions of MTe_(2)ferroelectric metals with noncentrosymmetric stacking have been reported,the realization of such polarization structure remains a challenge.Here,we demonstrate the synthesis of PtTe_(2)with non-centrosymmetric stacking layers,in contrast to bulk AA stacking,achieved within a scanning transmission electron microscope(STEM)by irradiating amorphous PtxTeythin flms with an electron beam probe.Cross-sectional STEM imaging combined with frst-principles calculations reveals that the diverse stacking confgurations due to an intralayerπ-stacking system break centrosymmetry in PtTe_(2),giving rise to the out-of-plane polarization.Three-dimensional atomic positions identifed by the atomic electron tomography method further demonstrate the local distortions associated with the non-centrosymmetric stacking layers in PtTe_(2).The understanding of the atomic origin of polarization in PtTe_(2)is of signifcant importance for developing devices that integrate ferroelectricity with metallicity.
基金supported by National Natural Science Foundation of China with project No.51406202
文摘An effect of the swirling flow on the combustion performance is studied by the computational fluid dynamics(CFD) in a micro-gas turbine with a centrifugal compressor, dump diffuser and forward-flow combustor. The distributions of air mass and the Temperature Pattern Factor(as: Overall Temperature Distribution Factor-OTDF) in outlet are investigated with two different swirling angles of compressed air as 0° and 15° in three combustors. The results show that the influences of swirling flow on the air distribution and OTDF cannot be neglected. Compared with no-swirling flow, the air through outer liner is more, and the air through the inner liner is less, and the pressure loss is bigger under the swirling condition in the same combustor. The Temperature Pattern Factor changes under the different swirling conditions.
