Switched Reluctance Motors(SRMs),outfitted with rugged construction,good speed range,high torque density,and rare earth-free nature that outweigh induction motors(IM)and permanent magnet synchronous motor(PMSM),afford...Switched Reluctance Motors(SRMs),outfitted with rugged construction,good speed range,high torque density,and rare earth-free nature that outweigh induction motors(IM)and permanent magnet synchronous motor(PMSM),afford a broad range of applications in the domain of electric vehicles(EVs).Standard copper magnetic wire and low-carbon steel laminations are used to construct SRMs,which give them high efficiency in the range of 85-95%.Despite SRM's desirable features over traditional motor-speed drives,high torque ripples and radial distortions constrain their deployment in EVs.Precise rotor position is imperative for effective management of the speed and torque of SRMs.This paper provides an illustrative compendium on review of the torque-speed control and ripple mitigation techniques using design enhancements and control methods for SRM drives for EV applications.The various schemes were evaluated on their performance metricsoperational speed range,control complexity,practical realization,need for pre-stored parameters(look-up tables of current,inductance and torque profiles)and motor controller memory requirements.The findings provide valuable insights into balancing the gains and trade-offs associated with EV applications.Furthermore,they pinpoint opportunities for enhancement by analyzing the cost and technical aspects of different SRM controllers.展开更多
Sensorless control of switched reluctance motors(SRMs) often requires a hybrid mode combining low-speed pulse injection methods and high-speed model-based estimation.However,pulse injection causes unwanted audible noi...Sensorless control of switched reluctance motors(SRMs) often requires a hybrid mode combining low-speed pulse injection methods and high-speed model-based estimation.However,pulse injection causes unwanted audible noises and torque ripples.This article proposes an enhanced model-based sensorless approach to extend downwards the speed range in which sensorless control can work without injection.An inertial phase-locked loop (IPLL) based on a stator flux observer is introduced for position estimation.Compared to the conventional phase-locked loop scheme,the IPLL offers a more robust disturbance rejection capability and thus reduces the flux model errors at lower speeds.Experimental results substantiate the feasibility of the extended low-speed operation using the model-based sensorless control approach.展开更多
A control strategy of switched reluctance motor (SRM)for electric vehicle applications is proposed. In electric vehicle application, the switched reluctance motor is a good choice with its flexible control method, com...A control strategy of switched reluctance motor (SRM)for electric vehicle applications is proposed. In electric vehicle application, the switched reluctance motor is a good choice with its flexible control method, compactness, robustness, high efficiency and high starting torque. In this paper, the control strategy of motoring and regenerative braking for electric vehicle application is presented. Computer simulations are employed to analyze the steady state behavior of SRM propulsion system. Experimental results in electric motorcycle are provided to demonstrate the validity of SRM propulsion system.展开更多
Switched reluctance motors(SRM)with full-pitch windings and segmental rotors are particularly suitable for the drive systems in aerospace environments because of low wind(oil)resistance and iron losses at high speed.I...Switched reluctance motors(SRM)with full-pitch windings and segmental rotors are particularly suitable for the drive systems in aerospace environments because of low wind(oil)resistance and iron losses at high speed.In this paper,the authors have been studying electromagnetic design of this motor.展开更多
In order to improve the reliability in torque calculation of SRM,an accurate nonlinear torque model regresses by recursive robust least squares support vector regression(RR-LSSVR)is proposed in this paper.The model is...In order to improve the reliability in torque calculation of SRM,an accurate nonlinear torque model regresses by recursive robust least squares support vector regression(RR-LSSVR)is proposed in this paper.The model is in terms of a segmented-rotor switched reluctance motor(SSRM).The characteristics of the SSRM is introduced to show its nonlinear characteristics both in magnetic and torque.Then,its mathematic model is established,and an accurate inductance measurement method and a torque calculation method are presented.After this,the principle of the RR-LSSVR and why it can adjust weights according to errors are described.The model used the RR-LSSVR algorithm shows an outstanding capability in accuracy and quickness compared with other algorithms.Finally,to further validate the accuracy of the proposed model in practical application,simulation and experiment are designed based on a 16/10 SSRM.展开更多
The switchless reluctance motor’s non-permanent magnet structure design ensures its high reliability in the marine environment;thus,it is a feasible solution for the generator of a sea wave power generation system.Ho...The switchless reluctance motor’s non-permanent magnet structure design ensures its high reliability in the marine environment;thus,it is a feasible solution for the generator of a sea wave power generation system.However,the corresponding thrust density and efficiency remain insufficient.This study focused on a new type of flat linear switched reluctance motor(LSRM),using the finite element software to establish a structural model,and optimized the design with the goal of improving the efficiency and energy density.The entropy method was adopted for sensitivity stratification to objectively select weights to avoid the influence of subjectively selected different proportional weights on the optimization results.Based on the entropy method,the sensitivity of different structural parameters was stratified,and the simulated annealing algorithm,response surface method,and single parameter scanning method were combined for optimization.Finally,the optimal structural size parameters of the motor were determined.Based on the two-dimensional finite element method,to simulate the electromagnetic performance of the reluctance motor under different operating conditions,such as thrust,loss,and efficiency,changes in motor performance before and after optimization were compared to verify the high power generation efficiency and energy density of the optimized linear motor.展开更多
This paper deals with an analytical method to effectively calculate the inductance of an exterior-rotor switched reluctance motor(SRM),which evaluates the winding inductance of both the active section and the end sect...This paper deals with an analytical method to effectively calculate the inductance of an exterior-rotor switched reluctance motor(SRM),which evaluates the winding inductance of both the active section and the end section,accounting for the influence of core saturation.According to the inductance calculated by the analytical model,the flux linkage table and torque table can be established,and the steady state performance such as phase current,flux linkage,copper loss and core loss can be predicted.Effectiveness of this method is verified by the finite element method as well as by experimental results of a 12/8 SRM prototype.展开更多
In order to reduce the torque ripple,increase the average torque and optimize the drive performance of the switched reluctance motor (SRM),the nonlinear dynamic model of SRM is established in the MATLAB /Simulink envi...In order to reduce the torque ripple,increase the average torque and optimize the drive performance of the switched reluctance motor (SRM),the nonlinear dynamic model of SRM is established in the MATLAB /Simulink environment.The effects of the turn-on and turn-off angles are investigated by the simulation results of the dynamic model,and the function is made among the rotor speed,turn-on angle and turn-off angle.To optimize the torque dynamic performance,the two-objective simultaneous optimization function is proposed by two weight factors.And the optimized turn-on and turn-off angles as functions of rotor speed are developed by using the simultaneous optimization method.Then the optimized torque controller is designed based on the optimized turn-on and turn-off angles.The simulation results show that the optimized torque controller designed in this paper can effectively reduce the torque ripple and increase the average torque,and optimize the torque dynamic performance of the SRM.展开更多
Bearingless switched reluctance motor(BSRM) not only combines the merits of bearingless motor(BM) and switched reluctance motor(SRM), but also decreases the vibration and acoustic noise of SRM, so it could be a strong...Bearingless switched reluctance motor(BSRM) not only combines the merits of bearingless motor(BM) and switched reluctance motor(SRM), but also decreases the vibration and acoustic noise of SRM, so it could be a strong candidate for high-speed driving fields. Under the circumstances, a 12/14 BSRM with hybrid stator pole has been proposed due to its high output torque density and excellent decoupling characteristics between torque and suspension force. However, this motor has torque dead-zone, which leads to problems of self-start at some rotor positions and large torque ripple during normal operation. To solve the existing problems in the 12/14 type, an asymmetric rotor pole type BSRM is proposed. The structure and design process of the proposed motor is presented in detail. The characteristics of the proposed motor is analyzed and compared with that of the 12/14 type. Furthermore, prototype of the proposed structure is designed, manufactured and experimented. Finally, simulation and test results are illustrated and analyzed to prove the validity of the proposed structure.展开更多
Based on analyzing the structure and working principle on electric vehicles （EVs） with dual motors coupled by planetarY gears, the control strategy of mode switching was proposed. The power interruption problem on E...Based on analyzing the structure and working principle on electric vehicles （EVs） with dual motors coupled by planetarY gears, the control strategy of mode switching was proposed. The power interruption problem on EVs with automatic mechanical transmission （AMT） shifting was resolved. Based on the speed-torque characteristics of the planetary gears and the principle of the auxiliary motor＇ s zero speed braking, control features of mode switching were introduced. The mode shifting between the main motor mode and dual motors coupled driving were studied. Matlab/Simulink was adopted as a platform to develop the simulation model of EVs with dual motors drive system and 3 gears AMT. Simulation results demonstrated that the power interruption of dual motors drive system was solved during mode switching. The power requirements of EVs were satisfied, too.展开更多
Although the five-degree-of-freedom magnetic levitation system composed of two conical bearingless switched reluctance motors(CBSRMs)owns the simplest structure,the torque and levitation forces are coupled greatly.The...Although the five-degree-of-freedom magnetic levitation system composed of two conical bearingless switched reluctance motors(CBSRMs)owns the simplest structure,the torque and levitation forces are coupled greatly.Therefore,it is difficult to make the rotor rotate and be fully levitated simultaneously.To solve this problem,two different role division control strategies are proposed in this paper,i.e.individual role division and mutual role division control strategies.The difference between them is the selection of motor which controls the torque or the axial force.In order to understand the characteristics of control variables,the principle and mathematical model of CBSRM are introduced.After that,two control strategies are explained in detail.To verify the demonstrated performance,the simulations are completed with MATLAB/Simulink.展开更多
Design and experimental studies on a hybrid excitation flux switching motor as a traction motor for hybrid electric vehicles drive are presented.A stator body of the motor consists of not only laminated silicon-iron e...Design and experimental studies on a hybrid excitation flux switching motor as a traction motor for hybrid electric vehicles drive are presented.A stator body of the motor consists of not only laminated silicon-iron electromagnetic steel and three-phase armature windings,but also both of field excitation coils and permanent magnets working together as a variable field magnetomotive force source.On the other hand,a rotor is composed of just laminated silicon-iron electromagnetic steel with salient poles like switched reluctance motor.To bring out the best in drive performances of the hybrid excitation flux switching motor as a variable flux motor for the application,each material adopted for the stator and rotor body should be designed properly in terms of motor efficiency,maximum torque and power densities and so forth.As some of them,in this paper,thinner silicon-iron electromagnetic steel sheet and permanent magnets with high remanent and low amount of Dysprosium used are applied for achieving higher motor efficiency.Moreover,all coils wound flatwise and edgewise using rectangular wires are introduced to realizing high filling factor for reduced copper losses.Experimental tests using a 60kW prototype of the motor demonstrates the designed motor has good motor efficiency under frequent operating points expected for the target vehicle drive.展开更多
There has been a growing interest in switched reluctance motor(SRM)ever since the development of thyristor in 1956.The most appealing feature of SRM which attracts researchers over these years is its simple structure ...There has been a growing interest in switched reluctance motor(SRM)ever since the development of thyristor in 1956.The most appealing feature of SRM which attracts researchers over these years is its simple structure that incorporates concentrated windings on the stator poles and plain laminations of ferromagnetic material as a rotor.Due to this attributes,advances are being made rapidly with the consideration that SRM can be used as an alternative to DC motors and permanent magnet motors.The objective of this paper is to present an overview of the recent developments and a prediction of possible future advancements in SR Drives.Brief history,importance,innovations in structure and control,along with practical application examples are all discussed here to give a more in-depth comprehension of the motor.展开更多
Torque ripple is an inherent property of switched reluctance motor(SRM),which seriously affects the control performance and application of the motor.This paper proposes two torque ripple suppression control strategies...Torque ripple is an inherent property of switched reluctance motor(SRM),which seriously affects the control performance and application of the motor.This paper proposes two torque ripple suppression control strategies based on torque-sharing function(TSF).According to the symmetry characteristics of the flux linkage and rotor position curve family,a fourth-order Fourier series is used to fit the SRM flux linkage analytical model.The coefficient of each harmonic term of the flux linkage model is a function related to current,expressed by a sixth-order polynomial.The torque analytical formula can be derived from the flux linkage model.The torque error is calculated via the identified torque model and is compensated through TSF controller in order to reduce torque ripple.The torque model can also be used to establish the torque loop to achieve accurate tracking of the TSF reference torque to reduce torque ripple.Digital simulation was conducted,followed by the implementation on a SRM test bench using a 28335DSP as the master control chip.The experimental results are consistent with the simulation results,and indicate the effectiveness of the proposed schemes.展开更多
In view of the large current peak and torque ripple in the actual current chopping control of switched reluctance motor,a segmented PWM duty cycle analysis method of switched reluctance motor based on current chopping...In view of the large current peak and torque ripple in the actual current chopping control of switched reluctance motor,a segmented PWM duty cycle analysis method of switched reluctance motor based on current chopping control is proposed in this paper.The method realizes the control of the winding current by adjusting the average voltage of the two ends of the winding in one cycle through the PWM duty cycle.At the same time,according to the inductance linear model,the conduction phase is divided into a small inductance region and an inductance rising region,and the analytical formulas of PWM duty cycle in the two regions are deduced respectively.Finally,through matlab/simulink simulation and motor platform experiment,the current chopping control is compared with the segmented PWM duty cycle analysis method in this paper.Simulation and experimental results show that the segmented PWM duty cycle analysis method can effectively reduce the current peak and torque ripple,and has high practical application value.展开更多
Since practical mathematical model for the design optimization of switched reluctance motor(SRM)is difficult to derive because of the strong nonlinearity,precise prediction of electromagnetic characteristics is of gre...Since practical mathematical model for the design optimization of switched reluctance motor(SRM)is difficult to derive because of the strong nonlinearity,precise prediction of electromagnetic characteristics is of great importance during the optimization procedure.In this paper,an improved generalized regression neural network(GRNN)optimized by fruit fly optimization algorithm(FOA)is proposed for the modeling of SRM that represent the relationship of torque ripple and efficiency with the optimization variables,stator pole arc,rotor pole arc and rotor yoke height.Finite element parametric analysis technology is used to obtain the sample data for GRNN training and verification.Comprehensive comparisons and analysis among back propagation neural network(BPNN),radial basis function neural network(RBFNN),extreme learning machine(ELM)and GRNN is made to test the effectiveness and superiority of FOA-GRNN.展开更多
When switched reluctance motor(SRM)is in the status of the traditional direct torque control(DTC)system,due to the high saturation nonlinearity of the electromagnetic relationships of switched reluctance motors,the to...When switched reluctance motor(SRM)is in the status of the traditional direct torque control(DTC)system,due to the high saturation nonlinearity of the electromagnetic relationships of switched reluctance motors,the torque ripple and the stator phase current are larger.In order to resolve the above problems,through the analysis and deduction for SRM flux model and the influence of characteristics of flux and speed on torque ripple,this paper presents a variable-flux control strategy with the three closed-loop structure based on the critical flux supersaturated speed.And a DTC system of SRM with variable flux and three closed-loop is built up in Matlab/simulink.Moreover,the DSP hardware experiment platform based on the TMS320F2812 is established to validate the performance of the improved algorithm.The simulation and experimental results show that the new scheme has an obvious effect on torque ripple reduction,and the three-phase stator current is obviously reduced,which greatly reduces the stator winding copper consumption during the operation of SRM.Moreover,the improved system has good system stability.展开更多
This paper proposes an improved method for the prediction of radial vibration in switched reluctance motor(SRM)considering magnetic saturation.In this paper,the basic modeling principle is briefly introduced,it is bas...This paper proposes an improved method for the prediction of radial vibration in switched reluctance motor(SRM)considering magnetic saturation.In this paper,the basic modeling principle is briefly introduced,it is based on the derivation that the peak acceleration is dependent on the product of phase current and current gradient idi/dt.However,the derivation may cause errors due to saturation effect.Thus in this paper,the discrete sample data are firstly acquired based on DC pulse measurement method,by which electromagnetic,torque and peak acceleration characteristics can all be acquired.Then the entire peak acceleration characteristics are obtained by improved Least Square Support Vector Machine(LSSVM).Based on the obtained static peak acceleration characteristics,the time-varied radial vibration model is established based on superposition of natural oscillations of dominant vibration modes.Finally,a simulation model is built up using MATLAB/Simulink.The good agreement between simulation and experiment shows that the proposed method for modeling is feasible and accurate,even under saturation.In addition,since LSSVM does not need any prior knowledge,it is much easier for modeling compared with other existing literatures.展开更多
Discusses the inevitability of torque ripple of switched reluctance motor (SRM) for its double saliency construction and switch power supply, and the minimization of torque ripple, under traditional current chopping c...Discusses the inevitability of torque ripple of switched reluctance motor (SRM) for its double saliency construction and switch power supply, and the minimization of torque ripple, under traditional current chopping control mode, and presents a varying current amplitude chopping control method with a linear control model of varying current amplitude chopping shown, and the simulation of torque profiles under two kinds of current chopping control modes to demonstrate the validity of decreasing torque ripple.展开更多
基金supported in part by the Universitat Politècnica de València under grant PAID-10-21supported through AMRITA Seed Grant(Proposal ID:ASG2022188)。
文摘Switched Reluctance Motors(SRMs),outfitted with rugged construction,good speed range,high torque density,and rare earth-free nature that outweigh induction motors(IM)and permanent magnet synchronous motor(PMSM),afford a broad range of applications in the domain of electric vehicles(EVs).Standard copper magnetic wire and low-carbon steel laminations are used to construct SRMs,which give them high efficiency in the range of 85-95%.Despite SRM's desirable features over traditional motor-speed drives,high torque ripples and radial distortions constrain their deployment in EVs.Precise rotor position is imperative for effective management of the speed and torque of SRMs.This paper provides an illustrative compendium on review of the torque-speed control and ripple mitigation techniques using design enhancements and control methods for SRM drives for EV applications.The various schemes were evaluated on their performance metricsoperational speed range,control complexity,practical realization,need for pre-stored parameters(look-up tables of current,inductance and torque profiles)and motor controller memory requirements.The findings provide valuable insights into balancing the gains and trade-offs associated with EV applications.Furthermore,they pinpoint opportunities for enhancement by analyzing the cost and technical aspects of different SRM controllers.
基金supported in part by the National Natural Science Foundation of China 52307069in part by 2024 Tertiary Education Scientific Research Project of Guangzhou Municipal Education Bureau under Grant2024312176in part by the Project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone under Grant HZQB-KCZYB-2020083。
文摘Sensorless control of switched reluctance motors(SRMs) often requires a hybrid mode combining low-speed pulse injection methods and high-speed model-based estimation.However,pulse injection causes unwanted audible noises and torque ripples.This article proposes an enhanced model-based sensorless approach to extend downwards the speed range in which sensorless control can work without injection.An inertial phase-locked loop (IPLL) based on a stator flux observer is introduced for position estimation.Compared to the conventional phase-locked loop scheme,the IPLL offers a more robust disturbance rejection capability and thus reduces the flux model errors at lower speeds.Experimental results substantiate the feasibility of the extended low-speed operation using the model-based sensorless control approach.
文摘A control strategy of switched reluctance motor (SRM)for electric vehicle applications is proposed. In electric vehicle application, the switched reluctance motor is a good choice with its flexible control method, compactness, robustness, high efficiency and high starting torque. In this paper, the control strategy of motoring and regenerative braking for electric vehicle application is presented. Computer simulations are employed to analyze the steady state behavior of SRM propulsion system. Experimental results in electric motorcycle are provided to demonstrate the validity of SRM propulsion system.
文摘Switched reluctance motors(SRM)with full-pitch windings and segmental rotors are particularly suitable for the drive systems in aerospace environments because of low wind(oil)resistance and iron losses at high speed.In this paper,the authors have been studying electromagnetic design of this motor.
基金This work was supported by the National Natural Science Foundation of China under Project 51875261the Natural Science Foundation of Jiangsu Province of China under Projects BK20180046 and BK20170071the“Qinglan project”of Jiangsu Province,and the Key Project of Natural Science Foundation of Jiangsu Higher Education Institutions under Project 17KJA460005.
文摘In order to improve the reliability in torque calculation of SRM,an accurate nonlinear torque model regresses by recursive robust least squares support vector regression(RR-LSSVR)is proposed in this paper.The model is in terms of a segmented-rotor switched reluctance motor(SSRM).The characteristics of the SSRM is introduced to show its nonlinear characteristics both in magnetic and torque.Then,its mathematic model is established,and an accurate inductance measurement method and a torque calculation method are presented.After this,the principle of the RR-LSSVR and why it can adjust weights according to errors are described.The model used the RR-LSSVR algorithm shows an outstanding capability in accuracy and quickness compared with other algorithms.Finally,to further validate the accuracy of the proposed model in practical application,simulation and experiment are designed based on a 16/10 SSRM.
基金This work is supported by the National Natural Science Foundation of China(52077141)the Natural Science Foundation of Liaoning Province(2021-YQ-09)the Liaoning Bai Qian Wan Talents Program,China。
文摘The switchless reluctance motor’s non-permanent magnet structure design ensures its high reliability in the marine environment;thus,it is a feasible solution for the generator of a sea wave power generation system.However,the corresponding thrust density and efficiency remain insufficient.This study focused on a new type of flat linear switched reluctance motor(LSRM),using the finite element software to establish a structural model,and optimized the design with the goal of improving the efficiency and energy density.The entropy method was adopted for sensitivity stratification to objectively select weights to avoid the influence of subjectively selected different proportional weights on the optimization results.Based on the entropy method,the sensitivity of different structural parameters was stratified,and the simulated annealing algorithm,response surface method,and single parameter scanning method were combined for optimization.Finally,the optimal structural size parameters of the motor were determined.Based on the two-dimensional finite element method,to simulate the electromagnetic performance of the reluctance motor under different operating conditions,such as thrust,loss,and efficiency,changes in motor performance before and after optimization were compared to verify the high power generation efficiency and energy density of the optimized linear motor.
文摘This paper deals with an analytical method to effectively calculate the inductance of an exterior-rotor switched reluctance motor(SRM),which evaluates the winding inductance of both the active section and the end section,accounting for the influence of core saturation.According to the inductance calculated by the analytical model,the flux linkage table and torque table can be established,and the steady state performance such as phase current,flux linkage,copper loss and core loss can be predicted.Effectiveness of this method is verified by the finite element method as well as by experimental results of a 12/8 SRM prototype.
基金Sponsored by the Ph.D.Program Foundation of Ministry of Education of China(Grant No.20092302120)
文摘In order to reduce the torque ripple,increase the average torque and optimize the drive performance of the switched reluctance motor (SRM),the nonlinear dynamic model of SRM is established in the MATLAB /Simulink environment.The effects of the turn-on and turn-off angles are investigated by the simulation results of the dynamic model,and the function is made among the rotor speed,turn-on angle and turn-off angle.To optimize the torque dynamic performance,the two-objective simultaneous optimization function is proposed by two weight factors.And the optimized turn-on and turn-off angles as functions of rotor speed are developed by using the simultaneous optimization method.Then the optimized torque controller is designed based on the optimized turn-on and turn-off angles.The simulation results show that the optimized torque controller designed in this paper can effectively reduce the torque ripple and increase the average torque,and optimize the torque dynamic performance of the SRM.
基金supported by National Natural Science Foundation of China under Grant 52077141 and 51920105011Young and Middle-Aged Scientific and Technological Innovation Talent Program of Shenyang City of Liaoning Province of China under Grant RC200427。
文摘Bearingless switched reluctance motor(BSRM) not only combines the merits of bearingless motor(BM) and switched reluctance motor(SRM), but also decreases the vibration and acoustic noise of SRM, so it could be a strong candidate for high-speed driving fields. Under the circumstances, a 12/14 BSRM with hybrid stator pole has been proposed due to its high output torque density and excellent decoupling characteristics between torque and suspension force. However, this motor has torque dead-zone, which leads to problems of self-start at some rotor positions and large torque ripple during normal operation. To solve the existing problems in the 12/14 type, an asymmetric rotor pole type BSRM is proposed. The structure and design process of the proposed motor is presented in detail. The characteristics of the proposed motor is analyzed and compared with that of the 12/14 type. Furthermore, prototype of the proposed structure is designed, manufactured and experimented. Finally, simulation and test results are illustrated and analyzed to prove the validity of the proposed structure.
基金Supported by Doctoral Fund of Ministry of Education of China(20101101110012)the National Natural Science Foundationof China(51175040)
文摘Based on analyzing the structure and working principle on electric vehicles （EVs） with dual motors coupled by planetarY gears, the control strategy of mode switching was proposed. The power interruption problem on EVs with automatic mechanical transmission （AMT） shifting was resolved. Based on the speed-torque characteristics of the planetary gears and the principle of the auxiliary motor＇ s zero speed braking, control features of mode switching were introduced. The mode shifting between the main motor mode and dual motors coupled driving were studied. Matlab/Simulink was adopted as a platform to develop the simulation model of EVs with dual motors drive system and 3 gears AMT. Simulation results demonstrated that the power interruption of dual motors drive system was solved during mode switching. The power requirements of EVs were satisfied, too.
基金supported by the National Natural Science Foundations of China (Nos. 51877107,51577087,51477074)
文摘Although the five-degree-of-freedom magnetic levitation system composed of two conical bearingless switched reluctance motors(CBSRMs)owns the simplest structure,the torque and levitation forces are coupled greatly.Therefore,it is difficult to make the rotor rotate and be fully levitated simultaneously.To solve this problem,two different role division control strategies are proposed in this paper,i.e.individual role division and mutual role division control strategies.The difference between them is the selection of motor which controls the torque or the axial force.In order to understand the characteristics of control variables,the principle and mathematical model of CBSRM are introduced.After that,two control strategies are explained in detail.To verify the demonstrated performance,the simulations are completed with MATLAB/Simulink.
基金This paper is based on results obtained from the future pioneering program"Development of Magnetic Material Technology for High-efficiency Motors"commissioned by the New Energy and Industrial Technology Development Organization(NEDO)。
文摘Design and experimental studies on a hybrid excitation flux switching motor as a traction motor for hybrid electric vehicles drive are presented.A stator body of the motor consists of not only laminated silicon-iron electromagnetic steel and three-phase armature windings,but also both of field excitation coils and permanent magnets working together as a variable field magnetomotive force source.On the other hand,a rotor is composed of just laminated silicon-iron electromagnetic steel with salient poles like switched reluctance motor.To bring out the best in drive performances of the hybrid excitation flux switching motor as a variable flux motor for the application,each material adopted for the stator and rotor body should be designed properly in terms of motor efficiency,maximum torque and power densities and so forth.As some of them,in this paper,thinner silicon-iron electromagnetic steel sheet and permanent magnets with high remanent and low amount of Dysprosium used are applied for achieving higher motor efficiency.Moreover,all coils wound flatwise and edgewise using rectangular wires are introduced to realizing high filling factor for reduced copper losses.Experimental tests using a 60kW prototype of the motor demonstrates the designed motor has good motor efficiency under frequent operating points expected for the target vehicle drive.
基金This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2018R1D1A1B07043735)。
文摘There has been a growing interest in switched reluctance motor(SRM)ever since the development of thyristor in 1956.The most appealing feature of SRM which attracts researchers over these years is its simple structure that incorporates concentrated windings on the stator poles and plain laminations of ferromagnetic material as a rotor.Due to this attributes,advances are being made rapidly with the consideration that SRM can be used as an alternative to DC motors and permanent magnet motors.The objective of this paper is to present an overview of the recent developments and a prediction of possible future advancements in SR Drives.Brief history,importance,innovations in structure and control,along with practical application examples are all discussed here to give a more in-depth comprehension of the motor.
基金This work was supported in part by National Natural Science Foundation of China under Grant 51977040.
文摘Torque ripple is an inherent property of switched reluctance motor(SRM),which seriously affects the control performance and application of the motor.This paper proposes two torque ripple suppression control strategies based on torque-sharing function(TSF).According to the symmetry characteristics of the flux linkage and rotor position curve family,a fourth-order Fourier series is used to fit the SRM flux linkage analytical model.The coefficient of each harmonic term of the flux linkage model is a function related to current,expressed by a sixth-order polynomial.The torque analytical formula can be derived from the flux linkage model.The torque error is calculated via the identified torque model and is compensated through TSF controller in order to reduce torque ripple.The torque model can also be used to establish the torque loop to achieve accurate tracking of the TSF reference torque to reduce torque ripple.Digital simulation was conducted,followed by the implementation on a SRM test bench using a 28335DSP as the master control chip.The experimental results are consistent with the simulation results,and indicate the effectiveness of the proposed schemes.
基金supported by National Natural Science Foundation of China under Grant 52167005Science and Technology Research Project of Jiangxi Provincial Department of Education under Grant GJJ200826。
文摘In view of the large current peak and torque ripple in the actual current chopping control of switched reluctance motor,a segmented PWM duty cycle analysis method of switched reluctance motor based on current chopping control is proposed in this paper.The method realizes the control of the winding current by adjusting the average voltage of the two ends of the winding in one cycle through the PWM duty cycle.At the same time,according to the inductance linear model,the conduction phase is divided into a small inductance region and an inductance rising region,and the analytical formulas of PWM duty cycle in the two regions are deduced respectively.Finally,through matlab/simulink simulation and motor platform experiment,the current chopping control is compared with the segmented PWM duty cycle analysis method in this paper.Simulation and experimental results show that the segmented PWM duty cycle analysis method can effectively reduce the current peak and torque ripple,and has high practical application value.
基金This work was supported in part by the National Natural Science Foundation of China under Grant61503132 and Grant51477047the Hunan Provincial Natural Science Foundation of China under Grant2015JJ5029.
文摘Since practical mathematical model for the design optimization of switched reluctance motor(SRM)is difficult to derive because of the strong nonlinearity,precise prediction of electromagnetic characteristics is of great importance during the optimization procedure.In this paper,an improved generalized regression neural network(GRNN)optimized by fruit fly optimization algorithm(FOA)is proposed for the modeling of SRM that represent the relationship of torque ripple and efficiency with the optimization variables,stator pole arc,rotor pole arc and rotor yoke height.Finite element parametric analysis technology is used to obtain the sample data for GRNN training and verification.Comprehensive comparisons and analysis among back propagation neural network(BPNN),radial basis function neural network(RBFNN),extreme learning machine(ELM)and GRNN is made to test the effectiveness and superiority of FOA-GRNN.
基金This work was supported in part by the National Natural Science Youth Foundation of China(51407021)the central university basic research business fee(3132015214).
文摘When switched reluctance motor(SRM)is in the status of the traditional direct torque control(DTC)system,due to the high saturation nonlinearity of the electromagnetic relationships of switched reluctance motors,the torque ripple and the stator phase current are larger.In order to resolve the above problems,through the analysis and deduction for SRM flux model and the influence of characteristics of flux and speed on torque ripple,this paper presents a variable-flux control strategy with the three closed-loop structure based on the critical flux supersaturated speed.And a DTC system of SRM with variable flux and three closed-loop is built up in Matlab/simulink.Moreover,the DSP hardware experiment platform based on the TMS320F2812 is established to validate the performance of the improved algorithm.The simulation and experimental results show that the new scheme has an obvious effect on torque ripple reduction,and the three-phase stator current is obviously reduced,which greatly reduces the stator winding copper consumption during the operation of SRM.Moreover,the improved system has good system stability.
基金This work was supported by the National Natural Science Foundation of China under Grant 51277026 and 61674033Natural Science Foundation of Jiangsu Province under Grant BK20161148the Scientific Research Foundation of Graduate School of Southeast University under Grant YBJJ1822.(Corresponding author:Weifeng Sun.)。
文摘This paper proposes an improved method for the prediction of radial vibration in switched reluctance motor(SRM)considering magnetic saturation.In this paper,the basic modeling principle is briefly introduced,it is based on the derivation that the peak acceleration is dependent on the product of phase current and current gradient idi/dt.However,the derivation may cause errors due to saturation effect.Thus in this paper,the discrete sample data are firstly acquired based on DC pulse measurement method,by which electromagnetic,torque and peak acceleration characteristics can all be acquired.Then the entire peak acceleration characteristics are obtained by improved Least Square Support Vector Machine(LSSVM).Based on the obtained static peak acceleration characteristics,the time-varied radial vibration model is established based on superposition of natural oscillations of dominant vibration modes.Finally,a simulation model is built up using MATLAB/Simulink.The good agreement between simulation and experiment shows that the proposed method for modeling is feasible and accurate,even under saturation.In addition,since LSSVM does not need any prior knowledge,it is much easier for modeling compared with other existing literatures.
文摘Discusses the inevitability of torque ripple of switched reluctance motor (SRM) for its double saliency construction and switch power supply, and the minimization of torque ripple, under traditional current chopping control mode, and presents a varying current amplitude chopping control method with a linear control model of varying current amplitude chopping shown, and the simulation of torque profiles under two kinds of current chopping control modes to demonstrate the validity of decreasing torque ripple.
