This paper makes a systematical study on characteristics of structure and motion of the tectonic blocks in northern part of the Shanxi fault depression zone by means of geometrical and kinematical analysis of the bloc...This paper makes a systematical study on characteristics of structure and motion of the tectonic blocks in northern part of the Shanxi fault depression zone by means of geometrical and kinematical analysis of the blocks. The ki-netic behavior of the blocks is discussed by comparing associated geomorphic features of fault movement. All analyses and studies are based on a Domino model. The block movement, fault basin extension and their regional distribution are systematically investigated. The result shows: (a) The studied region is divided into sub-regions by NW striking faults: the western, middle and eastern sub-region with crustal extension being 4.46 km, 2.80 km and 1.86 km, respectively. The extensional amount of each block in the region is estimated being generally about 1 km. The calculated result using the block motion model approximately fits the data of geologic survey. (b) Block kin-ematical features are obviously different between the northern and southern part, with the Hengshan block in be-tween, of the studied region. Moreover, the magnitude of the largest historical earthquake in the northern part is about 6, while that in the southern is 7. The faulted blocks in the northern sub-region show northwestward exten-sion, indicating a feature of extensional graben, while the blocks in the southern part manifest tilt motion, extend-ing southeastward, in the opposite sense of fault dipping. Additional tectonic stress generated by block rotation may be one of major factors affecting seismogenic process in the region. It is responsible for the difference in the movement of the block boundary faults and seismic activities between the two sub-regions.展开更多
The new features of H. 264 video coding standard make the motion estimation module much more time consuming than before. Especially, the motion search is required for each of the 4 modes for inter prediction. In order...The new features of H. 264 video coding standard make the motion estimation module much more time consuming than before. Especially, the motion search is required for each of the 4 modes for inter prediction. In order to reduce the computational complexity, we analyze the statistics of results of motion estimation, such as the continuity of best modes of blocks in successive frames and the chance to give up a sub-partition mode （smaller than 16 × 16） after integer-pixel motion estimation, from which we suggest to make mode prediction based on the motion information of the previous frame and skip sub-pixel motion estimation in subpartition mode selectively. According to the experimental result, the proposed algorithm can save 75 % of the computational time with a slight degradation （0.03 dB） on PSNR compared with the pseudocode of fast search motion estimation in JM12.2.展开更多
MSU Stego Video is a public video steganographic tool, which has strong robustness and is regarded as a real video steganographic tool. In order to increase the detection rate, this paper proposes a new steganoalysis ...MSU Stego Video is a public video steganographic tool, which has strong robustness and is regarded as a real video steganographic tool. In order to increase the detection rate, this paper proposes a new steganoalysis method against MSU, which uses the chessboard character of MSU embedded video, proposes a down-sample block-based collusion method to estimate the original frame and checks the chessboard mode of the different frame between tested frame and estimated frame to detect MSU steganographic evidences. To reduce the error introduced by severe movement of the video content, a method that abandons severe motion blocks from detecting is proposed. The experiment results show that the false negative rate of the proposed algorithm is lower than 5%, and the false positive rate is lower than 2%. Our algorithm has significantly better performance than existing algorithms. Especially to the video that has fast motion, the algorithm has more remarkable performance.展开更多
A correlation tracking algorithm based on template partition motion estimation proposed for improving real time performance of the conventional correlation matching algorithms. The target trajectory fitted using the l...A correlation tracking algorithm based on template partition motion estimation proposed for improving real time performance of the conventional correlation matching algorithms. The target trajectory fitted using the least square with equal space in whole interval and the target prediction point is found out. According to the requirements of block motion estimation(BME) algorithm,the template divided into some macro blocks. The searching process is conducted by using diamond search algorithm around the prediction point and the optimal motion vector of each block is calculated. A point corresponding to the motion vector with the best matching is taken as a rough matching point of the template. The relation of relative position between the block with matching point and the searching area determined to decide whether to conduct precise matching search or to construct a new search area in the gradient direction. The target tracking experiment results show that over 70% time cost can be reduced caompared with the conventional correlation matching algorithm based on full search method.展开更多
In the field of predictive video coding and format conversion, there is an increasing attention towards estimation of the true inter-frame motion. The restoration of motion vector field computed by 3-D RS is addressed...In the field of predictive video coding and format conversion, there is an increasing attention towards estimation of the true inter-frame motion. The restoration of motion vector field computed by 3-D RS is addressed and a propagating adaptive-weighted vector median (PAWVM) post-filter is proposed. This approach decomposes blocks to make a better estimation on object borders and propagates good vectors in the scanning direction. Furthermore, a hard-thresholding method is introduced into calculating vector weights to improve the propagating. By exploiting both the spatial correlation of the vector field and the matching error of candidate vectors, PAWVM makes a good balance between the smoothness of vector field and the prediction error, and the output vector field is more valid to reflect the true motion.展开更多
The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the E...The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the Eurasia reference framework has been obtained, and the general trend of contemporary crustal motion after the occurrence of the Wenchuan earthquake has been studied.In addition, using the velocity field, the block movement velocity has been estimated by least-squares fitting.Furthermore, the properties and displacement rates of main faults have been obtained from the differences in velocity vectors of the blocks on both sides of the faults.The results reveal that there are no obvious changes in the general characteristics of crustal motion in this area after the Wenchuan earthquake.The earthquake mainly changed the rate of the movement of the Chuan-Qing block and caused variation in the movement direction of the South China block.The effect of the earthquake on faults is mainly reflected in variations in fault displacement velocity; there is no fundamental change in the properties of fault activity.The displacement rates of the Xianshuihe fault decreased by 3–4 mm/a, the Longmenshan fault increased by 9–10 mm/a, and the northern segment of the Anninghe fault increased by approximately 9 mm/a.Furthermore, the displacement rates of the Minjiang, Xueshan, Huya, Longquanshan, and Xinjin faults increased by 2–3 mm/a.This implies that the effects of the Wenchuan earthquake on crustal movement can mainly be observed in the Chuan-Qing, South China, and N-Chuan-Dian blocks and their internal faults, as well as the Xianshuihe and Longmenshan faults and the northern section of the Anninghe fault.The reason for this is that the Wenchuan earthquake disturbed the kinematic and dynamic balance in the region.展开更多
A new faster block-matching algorithm （BMA） by using both search candidate and pixd sulzsamplings is proposed. Firstly a pixd-subsampling approach used in adjustable partial distortion search （APDS） is adjusted to...A new faster block-matching algorithm （BMA） by using both search candidate and pixd sulzsamplings is proposed. Firstly a pixd-subsampling approach used in adjustable partial distortion search （APDS） is adjusted to visit about half points of all search candidates by subsampling them, using a spiral-scanning path with one skip. Two sdected candidates that have minimal and second minimal block distortion measures are obtained. Then a fine-tune step is taken around them to find the best one. Some analyses are given to approve the rationality of the approach of this paper. Experimental results show that, as compared to APDS, the proposed algorithm can enhance the block-matching speed by about 30% while maintaining its MSE performance very close to that of it. And it performs much better than many other BMAs such as TSS, NTSS, UCDBS and NPDS.展开更多
Block-in-matrix-soils(bimsoils)are geological mixtures that have distinct structures consisting of relatively strong rock blocks and weak matrix soils.It is still a challenge to evaluate the mechanical behaviors of bi...Block-in-matrix-soils(bimsoils)are geological mixtures that have distinct structures consisting of relatively strong rock blocks and weak matrix soils.It is still a challenge to evaluate the mechanical behaviors of bimsoils because of the heterogeneity,chaotic structure,and lithological variability.As a result,only very limited laboratory studies have been reported on the evolution of their internal deformation.In this study,the deformation evolution of bimsoils under uniaxial loading is investigated using real-time X-ray computed tomography(CT)and image correlation algorithm(with a rock block percentage(RBP)of 40%).Three parameters,i.e.heterogeneity coefficient(K),correlation coefficient(CC),and standard deviation(STD)of displacement fields,are proposed to quantify the heterogeneity of the motion of the rock blocks and the progressive deformation of the bimsoils.Experimental results show that the rock blocks in bimsoils are prone to forming clusters with increasing loading,and the sliding surface goes around only one side of a cluster.Based on the movement of the rock blocks recorded by STD and CC,the progressive deformation of the bimsoils is quantitatively divided into three stages:initialization of the rotation of rock blocks,formation of rock block clusters,and formation of a shear band by rock blocks with significant rotation.Moreover,the experimental results demonstrate that the meso-motion of rock blocks controls the macroscopic mechanical properties of the samples.展开更多
This paper presents a new motion estimation algorithm for video conference signal coding. This type of algorithm is called block adaptive recursive algorithm (BARA). Simulation results show that this new algorithm has...This paper presents a new motion estimation algorithm for video conference signal coding. This type of algorithm is called block adaptive recursive algorithm (BARA). Simulation results show that this new algorithm has better performance than conventional ones.展开更多
Generation of a depth-map from 2D video is the kernel of DIBR (Depth Image Based Rendering) in 2D-3D video conversion systems. However it occupies over most of the system resource where the motion search module takes ...Generation of a depth-map from 2D video is the kernel of DIBR (Depth Image Based Rendering) in 2D-3D video conversion systems. However it occupies over most of the system resource where the motion search module takes up 90% time-consuming in typical motion estimation-based depth-map generation algorithms. In order to reduce the computational complexity, in this paper a new fast depth-map generation algorithm based on motion search is developed, in which a fast diamond search algorithm is adopted to decide whether a 16x16 or 4x4 block size is used based on Sobel operator in the motion search module to obtain a sub-depth-map. Then the sub-depth-map will be fused with the sub-depth-maps gotten from depth from color component Cr and depth from linear perspective modules to compensate and refine detail of the depth-map, finally obtain a better depth-map. The simulation results demonstrate that the new approach can greatly reduce over 50% computational complexity compared to other existing methods.展开更多
文摘This paper makes a systematical study on characteristics of structure and motion of the tectonic blocks in northern part of the Shanxi fault depression zone by means of geometrical and kinematical analysis of the blocks. The ki-netic behavior of the blocks is discussed by comparing associated geomorphic features of fault movement. All analyses and studies are based on a Domino model. The block movement, fault basin extension and their regional distribution are systematically investigated. The result shows: (a) The studied region is divided into sub-regions by NW striking faults: the western, middle and eastern sub-region with crustal extension being 4.46 km, 2.80 km and 1.86 km, respectively. The extensional amount of each block in the region is estimated being generally about 1 km. The calculated result using the block motion model approximately fits the data of geologic survey. (b) Block kin-ematical features are obviously different between the northern and southern part, with the Hengshan block in be-tween, of the studied region. Moreover, the magnitude of the largest historical earthquake in the northern part is about 6, while that in the southern is 7. The faulted blocks in the northern sub-region show northwestward exten-sion, indicating a feature of extensional graben, while the blocks in the southern part manifest tilt motion, extend-ing southeastward, in the opposite sense of fault dipping. Additional tectonic stress generated by block rotation may be one of major factors affecting seismogenic process in the region. It is responsible for the difference in the movement of the block boundary faults and seismic activities between the two sub-regions.
基金Sponsored by the National Natural Science Foundation of China(60772066)
文摘The new features of H. 264 video coding standard make the motion estimation module much more time consuming than before. Especially, the motion search is required for each of the 4 modes for inter prediction. In order to reduce the computational complexity, we analyze the statistics of results of motion estimation, such as the continuity of best modes of blocks in successive frames and the chance to give up a sub-partition mode （smaller than 16 × 16） after integer-pixel motion estimation, from which we suggest to make mode prediction based on the motion information of the previous frame and skip sub-pixel motion estimation in subpartition mode selectively. According to the experimental result, the proposed algorithm can save 75 % of the computational time with a slight degradation （0.03 dB） on PSNR compared with the pseudocode of fast search motion estimation in JM12.2.
基金Supported by the National Natural Science Foundation of China(60970114)Doctoral Fund of Ministry of Education of China(20110141130006)
文摘MSU Stego Video is a public video steganographic tool, which has strong robustness and is regarded as a real video steganographic tool. In order to increase the detection rate, this paper proposes a new steganoalysis method against MSU, which uses the chessboard character of MSU embedded video, proposes a down-sample block-based collusion method to estimate the original frame and checks the chessboard mode of the different frame between tested frame and estimated frame to detect MSU steganographic evidences. To reduce the error introduced by severe movement of the video content, a method that abandons severe motion blocks from detecting is proposed. The experiment results show that the false negative rate of the proposed algorithm is lower than 5%, and the false positive rate is lower than 2%. Our algorithm has significantly better performance than existing algorithms. Especially to the video that has fast motion, the algorithm has more remarkable performance.
基金Sponsored by the National Defense Pre-Research Foundation of China
文摘A correlation tracking algorithm based on template partition motion estimation proposed for improving real time performance of the conventional correlation matching algorithms. The target trajectory fitted using the least square with equal space in whole interval and the target prediction point is found out. According to the requirements of block motion estimation(BME) algorithm,the template divided into some macro blocks. The searching process is conducted by using diamond search algorithm around the prediction point and the optimal motion vector of each block is calculated. A point corresponding to the motion vector with the best matching is taken as a rough matching point of the template. The relation of relative position between the block with matching point and the searching area determined to decide whether to conduct precise matching search or to construct a new search area in the gradient direction. The target tracking experiment results show that over 70% time cost can be reduced caompared with the conventional correlation matching algorithm based on full search method.
文摘In the field of predictive video coding and format conversion, there is an increasing attention towards estimation of the true inter-frame motion. The restoration of motion vector field computed by 3-D RS is addressed and a propagating adaptive-weighted vector median (PAWVM) post-filter is proposed. This approach decomposes blocks to make a better estimation on object borders and propagates good vectors in the scanning direction. Furthermore, a hard-thresholding method is introduced into calculating vector weights to improve the propagating. By exploiting both the spatial correlation of the vector field and the matching error of candidate vectors, PAWVM makes a good balance between the smoothness of vector field and the prediction error, and the output vector field is more valid to reflect the true motion.
基金supported by a geological survey project of the China Geological Survey (No.1212011140013, No.12120113009800)
文摘The Wenchuan earthquake has altered the crustal motion characteristics in the eastern margin of the Tibetan Plateau and adjacent regions.Using discontinuous GPS survey data for 2008–2012, the velocity field for the Eurasia reference framework has been obtained, and the general trend of contemporary crustal motion after the occurrence of the Wenchuan earthquake has been studied.In addition, using the velocity field, the block movement velocity has been estimated by least-squares fitting.Furthermore, the properties and displacement rates of main faults have been obtained from the differences in velocity vectors of the blocks on both sides of the faults.The results reveal that there are no obvious changes in the general characteristics of crustal motion in this area after the Wenchuan earthquake.The earthquake mainly changed the rate of the movement of the Chuan-Qing block and caused variation in the movement direction of the South China block.The effect of the earthquake on faults is mainly reflected in variations in fault displacement velocity; there is no fundamental change in the properties of fault activity.The displacement rates of the Xianshuihe fault decreased by 3–4 mm/a, the Longmenshan fault increased by 9–10 mm/a, and the northern segment of the Anninghe fault increased by approximately 9 mm/a.Furthermore, the displacement rates of the Minjiang, Xueshan, Huya, Longquanshan, and Xinjin faults increased by 2–3 mm/a.This implies that the effects of the Wenchuan earthquake on crustal movement can mainly be observed in the Chuan-Qing, South China, and N-Chuan-Dian blocks and their internal faults, as well as the Xianshuihe and Longmenshan faults and the northern section of the Anninghe fault.The reason for this is that the Wenchuan earthquake disturbed the kinematic and dynamic balance in the region.
基金This project was supported by the National Natural Science Foundation of China (60272099) .
文摘A new faster block-matching algorithm （BMA） by using both search candidate and pixd sulzsamplings is proposed. Firstly a pixd-subsampling approach used in adjustable partial distortion search （APDS） is adjusted to visit about half points of all search candidates by subsampling them, using a spiral-scanning path with one skip. Two sdected candidates that have minimal and second minimal block distortion measures are obtained. Then a fine-tune step is taken around them to find the best one. Some analyses are given to approve the rationality of the approach of this paper. Experimental results show that, as compared to APDS, the proposed algorithm can enhance the block-matching speed by about 30% while maintaining its MSE performance very close to that of it. And it performs much better than many other BMAs such as TSS, NTSS, UCDBS and NPDS.
基金This work was supported by the National Natural Science Foundation of China(Grants Nos.41972287 and 42090023)the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(Grant No.2019QZKK0904).
文摘Block-in-matrix-soils(bimsoils)are geological mixtures that have distinct structures consisting of relatively strong rock blocks and weak matrix soils.It is still a challenge to evaluate the mechanical behaviors of bimsoils because of the heterogeneity,chaotic structure,and lithological variability.As a result,only very limited laboratory studies have been reported on the evolution of their internal deformation.In this study,the deformation evolution of bimsoils under uniaxial loading is investigated using real-time X-ray computed tomography(CT)and image correlation algorithm(with a rock block percentage(RBP)of 40%).Three parameters,i.e.heterogeneity coefficient(K),correlation coefficient(CC),and standard deviation(STD)of displacement fields,are proposed to quantify the heterogeneity of the motion of the rock blocks and the progressive deformation of the bimsoils.Experimental results show that the rock blocks in bimsoils are prone to forming clusters with increasing loading,and the sliding surface goes around only one side of a cluster.Based on the movement of the rock blocks recorded by STD and CC,the progressive deformation of the bimsoils is quantitatively divided into three stages:initialization of the rotation of rock blocks,formation of rock block clusters,and formation of a shear band by rock blocks with significant rotation.Moreover,the experimental results demonstrate that the meso-motion of rock blocks controls the macroscopic mechanical properties of the samples.
基金Supported by the State Key Laboratory of Inflormation Security
文摘This paper presents a new motion estimation algorithm for video conference signal coding. This type of algorithm is called block adaptive recursive algorithm (BARA). Simulation results show that this new algorithm has better performance than conventional ones.
文摘Generation of a depth-map from 2D video is the kernel of DIBR (Depth Image Based Rendering) in 2D-3D video conversion systems. However it occupies over most of the system resource where the motion search module takes up 90% time-consuming in typical motion estimation-based depth-map generation algorithms. In order to reduce the computational complexity, in this paper a new fast depth-map generation algorithm based on motion search is developed, in which a fast diamond search algorithm is adopted to decide whether a 16x16 or 4x4 block size is used based on Sobel operator in the motion search module to obtain a sub-depth-map. Then the sub-depth-map will be fused with the sub-depth-maps gotten from depth from color component Cr and depth from linear perspective modules to compensate and refine detail of the depth-map, finally obtain a better depth-map. The simulation results demonstrate that the new approach can greatly reduce over 50% computational complexity compared to other existing methods.
