This paper discusses an in situ observation of fracture behavior around a crack tip in ferroelectric ceramics under combined electromechanical loading by use of a moiré interferometry technique.The deformation fi...This paper discusses an in situ observation of fracture behavior around a crack tip in ferroelectric ceramics under combined electromechanical loading by use of a moiré interferometry technique.The deformation field induced by the electric field and the stress concentration near the crack tip in three-points bending experiments was measured.By analysis of the moiré images it is found that under a constant mechanical load,the electric field almost has no effect on the crack extension in the case that the directions of the poling,electric field and crack extension are perpendicular to each other.When the poling direction is parallel to the crack extension direction and perpendicular to the electric field,the strain decreases faster than that calculated by FEM with and without electrical loading as one goes away from the crack tip.In addition,as the electric field intensity increases,the strain near the crack tip increases,and the strain concentration becomes more significant.展开更多
This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical...This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical path,the elastic constant,strain and displacement of the tibia are measured.Compared with the electric measuring method the error is samll and the sensitivity is high.展开更多
Moire interferometry method is introduced to study the feasibilities of J integral as a plastic singularity parameter at the tip of the notch in the welded joints. The results show that J dominance in most studied cas...Moire interferometry method is introduced to study the feasibilities of J integral as a plastic singularity parameter at the tip of the notch in the welded joints. The results show that J dominance in most studied cases is not validated in v and u displacement fields. Therefore, it can be concluded that J-integral as controlling parameter used to estimate the safety of welded structures is not always valid.展开更多
The hole-drilling method is one of the most wellknown methods for measuring residual stresses. To identify unknown plane stresses in a specimen, a circular hole is first drilled in the infinite plate under plane stres...The hole-drilling method is one of the most wellknown methods for measuring residual stresses. To identify unknown plane stresses in a specimen, a circular hole is first drilled in the infinite plate under plane stress, then the strains resulting from the hole drilling is measured. The strains may be acquired from interpreting the Moire signature around the hole. In crossed grating Moire interferometry, the horizontal and vertical displacement fields （u and v） can be obtained to determinate two strain fields and one shearing strain field. In this paper, by means of Moire interferometry and three directions grating （grating rosette） developed by the authors, three displacement fields （u, v and s） are obtained to acquire three strain fields. As a practical application, the hole-drilling method is adopted to measure the relief strains for aluminum and fiber reinforced composite. It is a step by step method; in each step a single laminate or equivalent depth is drilled to find some relationships between the drilling depth and the residual strains relieved in the fiber reinforced composite materials.展开更多
Residual stresses in ion-implanted NiTi alloy are measured by a combined method ofMoir6 interferometry and hole-drilling. Oxygen ions are implanted into the NiTi alloy under a voltage of 30 kV by a dose of 1.0×10...Residual stresses in ion-implanted NiTi alloy are measured by a combined method ofMoir6 interferometry and hole-drilling. Oxygen ions are implanted into the NiTi alloy under a voltage of 30 kV by a dose of 1.0×10^17ions/cm^2 for one hour. Subsequently, in order to avoid dimensional error, a hole is drilled exactly in the center of the sample. The distribution of residual stresses around the hole is measured. It is indicated that the method which combines the Moire interferometry with hole-drilling is able to be used to measure residual stresses produced by ion implantation.展开更多
In this paper, we demonstrate a new optical method for tiny strain measurements based on the principle of carrier fringes of moire interferometry. A cross-line grating with frequency of 1200 lp/mm is replicated on the...In this paper, we demonstrate a new optical method for tiny strain measurements based on the principle of carrier fringes of moire interferometry. A cross-line grating with frequency of 1200 lp/mm is replicated on the specimen surface, and the strain can be deduced from the changes in carrier fringes before and after the deformation of an object. Four coherent laser beams are used to obtain the carrier fringe patterns of field U and V. Both theoretical analysis and numerical simulation indicate that the ideal accuracy of strain can be controlled within a range of ±1με. Case study of a plane extension experiment shows that the measurement accuracy of strain can be controlled within the range of ±10με. The average strain values of every row of field U and every column of field V can be obtained by using this method, and approximated strain of every pixel in the whole-field can be further acquired, and thus it is possible to measure tiny strains occurred in a micro-field. The technology in this paper can provide comprehensive information for analyzing related mechanical content in the field of MEMS.展开更多
In order to investigate the survivable specimen gratings, the crossed-line300 lines/mm gratings were chemically etched directly into the surface of the specimens.In order to obtain high diffraction efficiency and to m...In order to investigate the survivable specimen gratings, the crossed-line300 lines/mm gratings were chemically etched directly into the surface of the specimens.In order to obtain high diffraction efficiency and to minimize the shear lag, the etcheddepth of the gratings was one fourth the wave length of coherent light. The influence ofthe uneven window on the high temperature moire interferometry was preliminarily analyzed. The quartz and inconel 718 specimens were tested up to 1200℃ and 900℃. Thecrack tip deformation singular field as well as load-induced and thermal expansion displacement fields were measured by means of high temperature moire interferometry.展开更多
A hybrid technique of combining moire measurement and analytical solution is developed to separate the normal and the tangential components of distributed contact stresses between two co-plane bodies. The moire interf...A hybrid technique of combining moire measurement and analytical solution is developed to separate the normal and the tangential components of distributed contact stresses between two co-plane bodies. The moire interfe-rometry offers the displacement fields near the deformed contact zone, from which the tangential strains and boundary slopes of the deformed configurations can be evaluated. Those experimental results provide boundary conditions for the discrete integration of Flamant＇s solutions, to inversely compute the separated components of the contact stresses.展开更多
This paper presents the application of Moire interferometry in measuring the displacement and strain field at notch-tip and crack-tip before and after crack propagation.The experiment is carried out using a three poin...This paper presents the application of Moire interferometry in measuring the displacement and strain field at notch-tip and crack-tip before and after crack propagation.The experiment is carried out using a three point bending beam with a notch.The N_x and N_y fringe patterns representing displacement field,and the ΔN_x/Δx and ΔN_y/Δy fringe patterns representing the strain field are obtained.The sensitivity of the meas- ured displacement is 0.417μm per fringe order.The displacement and strain distribution along the section x=0 have been worked out according to N_x and N_y fringe patterns.展开更多
This paper presents a method to measure the in-plane displacement fields of curved surface by moire interferometry of partial coherent light.The method has the following advantages:simple optical system,no requirement...This paper presents a method to measure the in-plane displacement fields of curved surface by moire interferometry of partial coherent light.The method has the following advantages:simple optical system,no requirement on vibration isolation,high sensitivity,large measuring range,high contrast of inter ference fringes and availability to in-situ structural testing.The present paper also gives theoretical analysis of the method and the formulas of light intensity and displacement field,and introduces a replication technique to form a high frequency reflectance grating on the curved surface.The experiments achieved the measurement of the surface displacement field of a cylindrical shell—the simultaneous circumferential,axial and 45° displacement fields.The torsional test data for surface displacement of a circular bar agree well with the theoretical result.展开更多
Transformation plasticity in ceria-stabilized tetragonal zirconia poly- crystals due to the stress-induced tetragonal-to-monoclinic martensitic transforma- tion under tension and bending is studied by moire interferom...Transformation plasticity in ceria-stabilized tetragonal zirconia poly- crystals due to the stress-induced tetragonal-to-monoclinic martensitic transforma- tion under tension and bending is studied by moire interferometry. The whole fringe patterns including u fields and v fields are acquired. According to these patterns, the distributions of transformation plasticity in transformation zones are obtained, and the phenomenon of plastic flow localization for transformation is revealed. The above work provides a significant experimental foundation for establishing transformation constitutive relations展开更多
We demonstrate a silicon nitride photonics-based imaging system that can perform one-dimensional interferometric imaging around the 1550-nm wavelength.The magnetograph using interferometric and computational imaging f...We demonstrate a silicon nitride photonics-based imaging system that can perform one-dimensional interferometric imaging around the 1550-nm wavelength.The magnetograph using interferometric and computational imaging for remote observations(MICRO)design uses silicon nitride on a Si platform to replace the bulky free-space optics of traditional magnetograph imaging systems with nanofabricated structures of a fraction of the size.The photonic integrated circuit(PIC)uses an array of lenslets that couple light into four input waveguides with spacing arranged along a Golomb ruler,where each aperture pair formed has a unique length.Each aperture is mixed with a 13-dBm reference laser and separated inside a 2×4 optical hybrid to generate in-phase and quadrature-phase signals to be detected in balanced detectors at the output of the PIC.We use a field programmable gate array(FPGA)board to digitize and process the measurements.The FPGAs and PIC are combined to reduce the overall size,weight,and power of the system,paving the way for a compact imaging system.We demonstrate a PIC-based imager design and experimental testbed for spectrometry applications.展开更多
Single-wavelength interferometry achieves high resolution for smooth surfaces but struggles with rough industrially relevant ones due to limited unambiguous measuring range and speckle effects.Multiwavelength interfer...Single-wavelength interferometry achieves high resolution for smooth surfaces but struggles with rough industrially relevant ones due to limited unambiguous measuring range and speckle effects.Multiwavelength interferometry addresses these challenges using synthetic wavelengths,enabling a balance between extended measurement range and resolution by combining several synthetic wavelengths.This approach holds immense potential for diverse industrial applications,yet it remains largely untapped due to the lack of suitable light sources.Existing solutions are constrained by limited flexibility in synthetic-wavelength generation and slow switching speeds.We demonstrate a light source for multiwavelength interferometry based on electro-optic single-sideband modulation.It reliably generates synthetic wavelengths with arbitrary values from centimeters to meters and switching time below 30 ms.This breakthrough paves the way for dynamic reconfigurable multiwavelength interferometry capable of adapting to complex surfaces and operating efficiently even outside laboratory settings.These capabilities unlock the full potential of multiwavelength interferometry,offering unprecedented flexibility and speed for industrial and technological applications.展开更多
Moiré superlattices provide a new platform to engineer various many-body problems. In this work, we consider arrays of quantum dots(QD) realized on semiconductor moiré superlattices with a deep moiré po...Moiré superlattices provide a new platform to engineer various many-body problems. In this work, we consider arrays of quantum dots(QD) realized on semiconductor moiré superlattices with a deep moiré potential. We diagonalize single QD with multiple electrons, and find degenerate ground states serving as local degrees of freedom(qudits) in the superlattice. With a deep moiré potential, the hopping and exchange interaction between nearby QDs become irrelevant,and the direct Coulomb interaction of the density–density type dominates. Therefore, nearby QDs must arrange the spatial densities to optimize the Coulomb energy. When the local Hilbert space has a two-fold orbital degeneracy, we find that a square superlattice realizes an anisotropic XY model, while a triangular superlattice realizes a generalized XY model with geometric frustration.展开更多
Acoustic detection has many applications across science and technology from medicine to imaging and communications.However,most acoustic sensors have a common limitation in that the detection must be near the acoustic...Acoustic detection has many applications across science and technology from medicine to imaging and communications.However,most acoustic sensors have a common limitation in that the detection must be near the acoustic source.Alternatively,laser interferometry with picometer-scale motional displacement detection can rapidly and precisely measure sound-induced minute vibrations on remote surfaces.Here,we demonstrate the feasibility of sound detection up to 100 kHz at remote sites with≈60 m optical path length via laser homodyne interferometry.Based on our ultrastable hertz linewidth laser with 10-15 fractional stability,our laser interferometer achieves 0.5 pm/Hz1/2 displacement sensitivity near 10 kHz,bounded only by laser frequency noise over 10 kHz.Between 140 Hz and 15 kHz,we achieve a homodyne acoustic sensing sensitivity of subnanometer/Pascal across our conversational frequency overtones.The minimal sound pressure detectable over 60 m optical path length is≈2 mPa,with dynamic ranges over 100 dB.With the demonstrated standoff picometric distance metrology,we successfully detected and reconstructed musical scores of normal conversational volumes with high fidelity.The acoustic detection via this precision laser interferometer could be applied to selective area sound sensing for remote acoustic metrology,optomechanical vibrational motion sensing,and ultrasensitive optical microphones at the laser frequency noise limits.展开更多
Two-dimensional(2D)moirésuperlattices with a small twist in orientation exhibit a broad range of physical properties due to the complicated intralayer and interlayer interactions modulated by the twist angle.Here...Two-dimensional(2D)moirésuperlattices with a small twist in orientation exhibit a broad range of physical properties due to the complicated intralayer and interlayer interactions modulated by the twist angle.Here,we report a metal-semiconductor phase transition in homojunction moirésuperlattices of NiS_(2) and PtTe_(2) with large twist angles based on high-throughput screening of 2D materials MX_(2)(M=Ni,Pd,Pt;X=S,Se,Te)via density functional theory(DFT)calculations.Firstly,the calculations for different stacking configurations(AA,AB and AC)reveal that AA stacking ones are stable for all the bilayer MX_(2).The metallic or semiconducting properties of these 2D materials remain invariable for different stacking without twisting except for NiS_(2) and PtTe_(2).For the twisted configurations,NiS_(2) transfers from metal to semiconductor when the twist angles are 21.79°,27.79°,32.20°and 60°.PtTe_(2) exhibits a similar transition at 60°.The phase transition is due to the weakened d-p orbital hybridization around the Fermi level as the interlayer distance increases in the twisted configurations.Further calculations of untwisted bilayers with increasing interlayer distance demonstrate that all the materials undergo metal-semiconductor phase transition with the increased interlayer distance because of the weakened d-p orbital hybridization.These findings provide fundamental insights into tuning the electronic properties of moirésuperlattices with large twist angles.展开更多
The measurement field of view of the conventional transmission electron microscopy(TEM)nano-moiréand scanning transmission electron microscopy(STEM)nano-moirémethods is limited to the hundred-nanometer scale...The measurement field of view of the conventional transmission electron microscopy(TEM)nano-moiréand scanning transmission electron microscopy(STEM)nano-moirémethods is limited to the hundred-nanometer scale,unable to meet the deformation field measurement requirements of micrometer-scale materials such as transistors and micro-devices.This paper proposed a novel measurement method based on scanning secondary moire,which can realize cross-scale deformation field measurement from nanometers to micrometers and solve the problem of insufficient measurement accuracy when using only the TEM moire method.This method utilized the electron wave in the TEM passing through the atomic lattice of two layers of different materials to generate TEM moire.On this basis,the TEM was tuned to the STEM mode,and by adjusting parameters such as the amount of defocusing,magnification,scanning angle,etc.,the electron beam was focused on the position near the interface of the two layers of materials,and at the same time,the scanning line was made approximately parallel to the direction of one of the TEM moire fringes.The scanning secondary moire patterns were generated when the scanning spacing was close to the TEM moire spacing.Through this method,the deformation field,mechanical properties,and internal defects of crystals can be detected by a large field of view with high sensitivity and high efficiency.Compared to traditional methods,the advantages of scanning secondary moire method lie in significantly improving the measurement field of TEM moire and STEM moire methods,realizing the cross-scale visualization measurement from nanometers to micrometers,and possessing atomic-level displacement measurement sensitivity.It can also simplify and efficiently identify dislocations,offering a new method for large-area visualization observation of dislocation density in broad application prospects.展开更多
Laser frequency combs,which are composed of a series of equally spaced coherent frequency components,have triggered revolutionary progress in precision spectroscopy and optical metrology.Length/distance is of fundamen...Laser frequency combs,which are composed of a series of equally spaced coherent frequency components,have triggered revolutionary progress in precision spectroscopy and optical metrology.Length/distance is of fundamental importance in both science and technology.We describe a ranging scheme based on chirped pulse interferometry.In contrast to the traditional spectral interferometry,the local oscillator is strongly chirped which is able to meet the measurement pulses at arbitrary distances,and therefore,the dead zones can be removed.The distances can be precisely determined via two measurement steps based on the time-of-flight method and synthetic wavelength interferometry,respectively.To overcome the speed limitation of the optical spectrum analyzer,the spectrograms are stretched and detected by a fast photodetector and oscilloscope and consequently mapped into the time domain in real time.The experimental results indicate that the measurement uncertainty can be well within±2μm,compared with the reference distance meter.The Allan deviation can reach 0.4μm at 4 ns averaging time and 25 nm at 1μs and can achieve 2 nm at 100μs averaging time.We also measured a spinning disk with grooves of different depths to verify the measurement speed,and the results show that the grooves with about 150 m∕s line speed can be clearly captured.Our method provides a unique combination of non-dead zones,ultrafast measurement speed,high precision and accuracy,large ambiguity range,and only one single comb source.This system could offer a powerful solution for field measurements in practical applications in the future.展开更多
Laser frequency microcombs provide a series of equidistant,coherent frequency markers across a broad spectrum,enabling advancements in laser spectroscopy,dense optical communications,precision distance metrology,and a...Laser frequency microcombs provide a series of equidistant,coherent frequency markers across a broad spectrum,enabling advancements in laser spectroscopy,dense optical communications,precision distance metrology,and astronomy.Here,we design and fabricate silicon nitride,dispersion-managed microresonators that effectively suppress avoided-mode crossings and achieve close-to-zero averaged dispersion.Both the stochastic noise and mode-locking dynamics of the resonator are numerically and experimentally investigated.First,we experimentally demonstrate thermally stabilized microcomb formation in the microresonator across different mode-locked states,showing negligible center frequency shifts and a broad frequency bandwidth.Next,we characterize the femtosecond timing jitter of the microcombs,supported by precise metrology of the timing phase and relative intensity noise.For the single-soliton state,we report a relative intensity noise of−153.2 dB∕Hz,close to the shot-noise limit,and a quantum-noise–limited timing jitter power spectral density of 0.4 as 2∕Hz at a 100 kHz offset frequency,measured using a self-heterodyne linear interferometer.In addition,we achieve an integrated timing jitter of 1.7 fs±0.07 fs,measured from 10 kHz to 1 MHz.Measuring and understanding these fundamental noise parameters in high clock rate frequency microcombs is critical for advancing soliton physics and enabling new applications in precision metrology.展开更多
In moiré-patterned van der Waals structures of transition metal dichalcogenides,correlated insulators can form under integer and fractional fillings,whose transport properties are governed by various quasiparticl...In moiré-patterned van der Waals structures of transition metal dichalcogenides,correlated insulators can form under integer and fractional fillings,whose transport properties are governed by various quasiparticle excitations including holons,doublons and interlayer exciton insulators.Here we theoretically investigate the nearest-neighbor inter-site hoppings of holons and interlayer exciton insulators.Our analysis indicates that these hopping strengths are significantly enhanced compared to that of a single carrier.The underlying mechanism can be attributed to the strong Coulomb interaction between carriers at different sites.For the interlayer exciton insulator consisting of a holon and a carrier in different layers,we have also obtained its effective Bohr radius and energy splitting between the ground and the first-excited states.展开更多
基金The project supported by the National Natural Science Foundation of China (10132010,10025209,10232023)
文摘This paper discusses an in situ observation of fracture behavior around a crack tip in ferroelectric ceramics under combined electromechanical loading by use of a moiré interferometry technique.The deformation field induced by the electric field and the stress concentration near the crack tip in three-points bending experiments was measured.By analysis of the moiré images it is found that under a constant mechanical load,the electric field almost has no effect on the crack extension in the case that the directions of the poling,electric field and crack extension are perpendicular to each other.When the poling direction is parallel to the crack extension direction and perpendicular to the electric field,the strain decreases faster than that calculated by FEM with and without electrical loading as one goes away from the crack tip.In addition,as the electric field intensity increases,the strain near the crack tip increases,and the strain concentration becomes more significant.
文摘This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical path,the elastic constant,strain and displacement of the tibia are measured.Compared with the electric measuring method the error is samll and the sensitivity is high.
文摘Moire interferometry method is introduced to study the feasibilities of J integral as a plastic singularity parameter at the tip of the notch in the welded joints. The results show that J dominance in most studied cases is not validated in v and u displacement fields. Therefore, it can be concluded that J-integral as controlling parameter used to estimate the safety of welded structures is not always valid.
基金the National Natural Science Foundation of China (10772117, 10572089)
文摘The hole-drilling method is one of the most wellknown methods for measuring residual stresses. To identify unknown plane stresses in a specimen, a circular hole is first drilled in the infinite plate under plane stress, then the strains resulting from the hole drilling is measured. The strains may be acquired from interpreting the Moire signature around the hole. In crossed grating Moire interferometry, the horizontal and vertical displacement fields （u and v） can be obtained to determinate two strain fields and one shearing strain field. In this paper, by means of Moire interferometry and three directions grating （grating rosette） developed by the authors, three displacement fields （u, v and s） are obtained to acquire three strain fields. As a practical application, the hole-drilling method is adopted to measure the relief strains for aluminum and fiber reinforced composite. It is a step by step method; in each step a single laminate or equivalent depth is drilled to find some relationships between the drilling depth and the residual strains relieved in the fiber reinforced composite materials.
基金National Natural Science Foundation of China (10572155)
文摘Residual stresses in ion-implanted NiTi alloy are measured by a combined method ofMoir6 interferometry and hole-drilling. Oxygen ions are implanted into the NiTi alloy under a voltage of 30 kV by a dose of 1.0×10^17ions/cm^2 for one hour. Subsequently, in order to avoid dimensional error, a hole is drilled exactly in the center of the sample. The distribution of residual stresses around the hole is measured. It is indicated that the method which combines the Moire interferometry with hole-drilling is able to be used to measure residual stresses produced by ion implantation.
基金the Basal Research Funds of National Defence Science and Technology
文摘In this paper, we demonstrate a new optical method for tiny strain measurements based on the principle of carrier fringes of moire interferometry. A cross-line grating with frequency of 1200 lp/mm is replicated on the specimen surface, and the strain can be deduced from the changes in carrier fringes before and after the deformation of an object. Four coherent laser beams are used to obtain the carrier fringe patterns of field U and V. Both theoretical analysis and numerical simulation indicate that the ideal accuracy of strain can be controlled within a range of ±1με. Case study of a plane extension experiment shows that the measurement accuracy of strain can be controlled within the range of ±10με. The average strain values of every row of field U and every column of field V can be obtained by using this method, and approximated strain of every pixel in the whole-field can be further acquired, and thus it is possible to measure tiny strains occurred in a micro-field. The technology in this paper can provide comprehensive information for analyzing related mechanical content in the field of MEMS.
文摘In order to investigate the survivable specimen gratings, the crossed-line300 lines/mm gratings were chemically etched directly into the surface of the specimens.In order to obtain high diffraction efficiency and to minimize the shear lag, the etcheddepth of the gratings was one fourth the wave length of coherent light. The influence ofthe uneven window on the high temperature moire interferometry was preliminarily analyzed. The quartz and inconel 718 specimens were tested up to 1200℃ and 900℃. Thecrack tip deformation singular field as well as load-induced and thermal expansion displacement fields were measured by means of high temperature moire interferometry.
基金the National Basic Research Program(2007CB935602)the National Natural Science Foundation of China(90607004)the ICM Fund of CAEP(42105080106).
文摘A hybrid technique of combining moire measurement and analytical solution is developed to separate the normal and the tangential components of distributed contact stresses between two co-plane bodies. The moire interfe-rometry offers the displacement fields near the deformed contact zone, from which the tangential strains and boundary slopes of the deformed configurations can be evaluated. Those experimental results provide boundary conditions for the discrete integration of Flamant＇s solutions, to inversely compute the separated components of the contact stresses.
基金The project supported by Chinese Academy of Sciences and National Natural Science Foundation of China
文摘This paper presents the application of Moire interferometry in measuring the displacement and strain field at notch-tip and crack-tip before and after crack propagation.The experiment is carried out using a three point bending beam with a notch.The N_x and N_y fringe patterns representing displacement field,and the ΔN_x/Δx and ΔN_y/Δy fringe patterns representing the strain field are obtained.The sensitivity of the meas- ured displacement is 0.417μm per fringe order.The displacement and strain distribution along the section x=0 have been worked out according to N_x and N_y fringe patterns.
基金The project supported by National Natural Science Foundation of China.
文摘This paper presents a method to measure the in-plane displacement fields of curved surface by moire interferometry of partial coherent light.The method has the following advantages:simple optical system,no requirement on vibration isolation,high sensitivity,large measuring range,high contrast of inter ference fringes and availability to in-situ structural testing.The present paper also gives theoretical analysis of the method and the formulas of light intensity and displacement field,and introduces a replication technique to form a high frequency reflectance grating on the curved surface.The experiments achieved the measurement of the surface displacement field of a cylindrical shell—the simultaneous circumferential,axial and 45° displacement fields.The torsional test data for surface displacement of a circular bar agree well with the theoretical result.
基金The project supported by the National Natural Science Foundation of China
文摘Transformation plasticity in ceria-stabilized tetragonal zirconia poly- crystals due to the stress-induced tetragonal-to-monoclinic martensitic transforma- tion under tension and bending is studied by moire interferometry. The whole fringe patterns including u fields and v fields are acquired. According to these patterns, the distributions of transformation plasticity in transformation zones are obtained, and the phenomenon of plastic flow localization for transformation is revealed. The above work provides a significant experimental foundation for establishing transformation constitutive relations
基金supported by the National Aeronautics and Space Administration(Grant No.80NSSC20K0914)the Lockheed Martin Internal Research Funds(IRAD).
文摘We demonstrate a silicon nitride photonics-based imaging system that can perform one-dimensional interferometric imaging around the 1550-nm wavelength.The magnetograph using interferometric and computational imaging for remote observations(MICRO)design uses silicon nitride on a Si platform to replace the bulky free-space optics of traditional magnetograph imaging systems with nanofabricated structures of a fraction of the size.The photonic integrated circuit(PIC)uses an array of lenslets that couple light into four input waveguides with spacing arranged along a Golomb ruler,where each aperture pair formed has a unique length.Each aperture is mixed with a 13-dBm reference laser and separated inside a 2×4 optical hybrid to generate in-phase and quadrature-phase signals to be detected in balanced detectors at the output of the PIC.We use a field programmable gate array(FPGA)board to digitize and process the measurements.The FPGAs and PIC are combined to reduce the overall size,weight,and power of the system,paving the way for a compact imaging system.We demonstrate a PIC-based imager design and experimental testbed for spectrometry applications.
基金supported by the German Federal Ministry of Education and Research,Research Program Quantum Systems(Grant No.13N16774).
文摘Single-wavelength interferometry achieves high resolution for smooth surfaces but struggles with rough industrially relevant ones due to limited unambiguous measuring range and speckle effects.Multiwavelength interferometry addresses these challenges using synthetic wavelengths,enabling a balance between extended measurement range and resolution by combining several synthetic wavelengths.This approach holds immense potential for diverse industrial applications,yet it remains largely untapped due to the lack of suitable light sources.Existing solutions are constrained by limited flexibility in synthetic-wavelength generation and slow switching speeds.We demonstrate a light source for multiwavelength interferometry based on electro-optic single-sideband modulation.It reliably generates synthetic wavelengths with arbitrary values from centimeters to meters and switching time below 30 ms.This breakthrough paves the way for dynamic reconfigurable multiwavelength interferometry capable of adapting to complex surfaces and operating efficiently even outside laboratory settings.These capabilities unlock the full potential of multiwavelength interferometry,offering unprecedented flexibility and speed for industrial and technological applications.
基金Project supported by the National Natural Science Foundation of China (Grant No. 12274005)the National Key Research and Development Program of China (Grant No. 2021YFA1401903)Innovation Program for Quantum Science and Technology (Grant No. 2021ZD0302403)。
文摘Moiré superlattices provide a new platform to engineer various many-body problems. In this work, we consider arrays of quantum dots(QD) realized on semiconductor moiré superlattices with a deep moiré potential. We diagonalize single QD with multiple electrons, and find degenerate ground states serving as local degrees of freedom(qudits) in the superlattice. With a deep moiré potential, the hopping and exchange interaction between nearby QDs become irrelevant,and the direct Coulomb interaction of the density–density type dominates. Therefore, nearby QDs must arrange the spatial densities to optimize the Coulomb energy. When the local Hilbert space has a two-fold orbital degeneracy, we find that a square superlattice realizes an anisotropic XY model, while a triangular superlattice realizes a generalized XY model with geometric frustration.
基金supported by the Office of Naval Research(Grant Nos.N00014-16-1-2094 and N00014-24-1-2547)the Lawrence Livermore National Laboratory(Grant No.B622827)the National Science Foundation.Y.-S.J.acknowledges support from KRISS(Grant Nos.25011026 and 25011211).
文摘Acoustic detection has many applications across science and technology from medicine to imaging and communications.However,most acoustic sensors have a common limitation in that the detection must be near the acoustic source.Alternatively,laser interferometry with picometer-scale motional displacement detection can rapidly and precisely measure sound-induced minute vibrations on remote surfaces.Here,we demonstrate the feasibility of sound detection up to 100 kHz at remote sites with≈60 m optical path length via laser homodyne interferometry.Based on our ultrastable hertz linewidth laser with 10-15 fractional stability,our laser interferometer achieves 0.5 pm/Hz1/2 displacement sensitivity near 10 kHz,bounded only by laser frequency noise over 10 kHz.Between 140 Hz and 15 kHz,we achieve a homodyne acoustic sensing sensitivity of subnanometer/Pascal across our conversational frequency overtones.The minimal sound pressure detectable over 60 m optical path length is≈2 mPa,with dynamic ranges over 100 dB.With the demonstrated standoff picometric distance metrology,we successfully detected and reconstructed musical scores of normal conversational volumes with high fidelity.The acoustic detection via this precision laser interferometer could be applied to selective area sound sensing for remote acoustic metrology,optomechanical vibrational motion sensing,and ultrasensitive optical microphones at the laser frequency noise limits.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52472153,11704081,62488201)the National Key Research and Development Program of China(Grant No.2022YFA1204100)+2 种基金National Science and Technology Innovation Talent Cultivation Program(Grant No.2023BZRC016)Guangxi Natural Science Foundation(Grant No.2020GXNSFAA297182)the special fund for“Guangxi Bagui Scholars”。
文摘Two-dimensional(2D)moirésuperlattices with a small twist in orientation exhibit a broad range of physical properties due to the complicated intralayer and interlayer interactions modulated by the twist angle.Here,we report a metal-semiconductor phase transition in homojunction moirésuperlattices of NiS_(2) and PtTe_(2) with large twist angles based on high-throughput screening of 2D materials MX_(2)(M=Ni,Pd,Pt;X=S,Se,Te)via density functional theory(DFT)calculations.Firstly,the calculations for different stacking configurations(AA,AB and AC)reveal that AA stacking ones are stable for all the bilayer MX_(2).The metallic or semiconducting properties of these 2D materials remain invariable for different stacking without twisting except for NiS_(2) and PtTe_(2).For the twisted configurations,NiS_(2) transfers from metal to semiconductor when the twist angles are 21.79°,27.79°,32.20°and 60°.PtTe_(2) exhibits a similar transition at 60°.The phase transition is due to the weakened d-p orbital hybridization around the Fermi level as the interlayer distance increases in the twisted configurations.Further calculations of untwisted bilayers with increasing interlayer distance demonstrate that all the materials undergo metal-semiconductor phase transition with the increased interlayer distance because of the weakened d-p orbital hybridization.These findings provide fundamental insights into tuning the electronic properties of moirésuperlattices with large twist angles.
基金supported by the National Natural Science Foundation of China(Grant Nos.12372178 and 12327801).
文摘The measurement field of view of the conventional transmission electron microscopy(TEM)nano-moiréand scanning transmission electron microscopy(STEM)nano-moirémethods is limited to the hundred-nanometer scale,unable to meet the deformation field measurement requirements of micrometer-scale materials such as transistors and micro-devices.This paper proposed a novel measurement method based on scanning secondary moire,which can realize cross-scale deformation field measurement from nanometers to micrometers and solve the problem of insufficient measurement accuracy when using only the TEM moire method.This method utilized the electron wave in the TEM passing through the atomic lattice of two layers of different materials to generate TEM moire.On this basis,the TEM was tuned to the STEM mode,and by adjusting parameters such as the amount of defocusing,magnification,scanning angle,etc.,the electron beam was focused on the position near the interface of the two layers of materials,and at the same time,the scanning line was made approximately parallel to the direction of one of the TEM moire fringes.The scanning secondary moire patterns were generated when the scanning spacing was close to the TEM moire spacing.Through this method,the deformation field,mechanical properties,and internal defects of crystals can be detected by a large field of view with high sensitivity and high efficiency.Compared to traditional methods,the advantages of scanning secondary moire method lie in significantly improving the measurement field of TEM moire and STEM moire methods,realizing the cross-scale visualization measurement from nanometers to micrometers,and possessing atomic-level displacement measurement sensitivity.It can also simplify and efficiently identify dislocations,offering a new method for large-area visualization observation of dislocation density in broad application prospects.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC2204601)the National Natural Science Foundation of China(Grant Nos.11925503 and 12275093)+1 种基金the Natural Science Foundation of Hubei Province(Grant No.2021CFB019)the State Key Laboratory of Applied Optics(Grant No.SKLAO2022001A10).
文摘Laser frequency combs,which are composed of a series of equally spaced coherent frequency components,have triggered revolutionary progress in precision spectroscopy and optical metrology.Length/distance is of fundamental importance in both science and technology.We describe a ranging scheme based on chirped pulse interferometry.In contrast to the traditional spectral interferometry,the local oscillator is strongly chirped which is able to meet the measurement pulses at arbitrary distances,and therefore,the dead zones can be removed.The distances can be precisely determined via two measurement steps based on the time-of-flight method and synthetic wavelength interferometry,respectively.To overcome the speed limitation of the optical spectrum analyzer,the spectrograms are stretched and detected by a fast photodetector and oscilloscope and consequently mapped into the time domain in real time.The experimental results indicate that the measurement uncertainty can be well within±2μm,compared with the reference distance meter.The Allan deviation can reach 0.4μm at 4 ns averaging time and 25 nm at 1μs and can achieve 2 nm at 100μs averaging time.We also measured a spinning disk with grooves of different depths to verify the measurement speed,and the results show that the grooves with about 150 m∕s line speed can be clearly captured.Our method provides a unique combination of non-dead zones,ultrafast measurement speed,high precision and accuracy,large ambiguity range,and only one single comb source.This system could offer a powerful solution for field measurements in practical applications in the future.
基金support from the Lawrence Livermore National Laboratory(Grant No.B622827)the National Science Foundation(Grant Nos.1824568,1810506,1741707,and 1829071)the Office of Naval Research(Grant No.N00014-16-1-2094).
文摘Laser frequency microcombs provide a series of equidistant,coherent frequency markers across a broad spectrum,enabling advancements in laser spectroscopy,dense optical communications,precision distance metrology,and astronomy.Here,we design and fabricate silicon nitride,dispersion-managed microresonators that effectively suppress avoided-mode crossings and achieve close-to-zero averaged dispersion.Both the stochastic noise and mode-locking dynamics of the resonator are numerically and experimentally investigated.First,we experimentally demonstrate thermally stabilized microcomb formation in the microresonator across different mode-locked states,showing negligible center frequency shifts and a broad frequency bandwidth.Next,we characterize the femtosecond timing jitter of the microcombs,supported by precise metrology of the timing phase and relative intensity noise.For the single-soliton state,we report a relative intensity noise of−153.2 dB∕Hz,close to the shot-noise limit,and a quantum-noise–limited timing jitter power spectral density of 0.4 as 2∕Hz at a 100 kHz offset frequency,measured using a self-heterodyne linear interferometer.In addition,we achieve an integrated timing jitter of 1.7 fs±0.07 fs,measured from 10 kHz to 1 MHz.Measuring and understanding these fundamental noise parameters in high clock rate frequency microcombs is critical for advancing soliton physics and enabling new applications in precision metrology.
基金support by the National Natural Sci-ence Foundation of China(Grant No.12274477)the De-partment of Science and Technology of Guangdong Provincein China(Grant No.2019QN01X061)。
文摘In moiré-patterned van der Waals structures of transition metal dichalcogenides,correlated insulators can form under integer and fractional fillings,whose transport properties are governed by various quasiparticle excitations including holons,doublons and interlayer exciton insulators.Here we theoretically investigate the nearest-neighbor inter-site hoppings of holons and interlayer exciton insulators.Our analysis indicates that these hopping strengths are significantly enhanced compared to that of a single carrier.The underlying mechanism can be attributed to the strong Coulomb interaction between carriers at different sites.For the interlayer exciton insulator consisting of a holon and a carrier in different layers,we have also obtained its effective Bohr radius and energy splitting between the ground and the first-excited states.
