Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of va...Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.展开更多
Nitrate(NO3-)is a widespread pollutant in high-salt wastewater and causes serious harm to human health.Although electrochemical removal of nitrate has been demonstrated to be a promising treatment method,the developme...Nitrate(NO3-)is a widespread pollutant in high-salt wastewater and causes serious harm to human health.Although electrochemical removal of nitrate has been demonstrated to be a promising treatment method,the development of low-cost electro-catalysts is still challenging.In this work,a phosphate modified iron(P-Fe)cathode was prepared for electrochemical removal of nitrate in high-salt wastewater.The phosphate modification greatly improved the activity of iron,and the removal rate of nitrate on P-Fe was three times higher than that on Fe electrode.Further experiments and density functional theory(DFT)calculations demonstrated that the modification of phosphoric acid improved the stability and the activity of the zero-valent iron electrode effectively for NO_(3)^(-) removal.The nitrate was firstly electrochemically reduced to ammonium,and then reacted with the anodic generated hypochlorite to N_(2).In this study,a strategy was developed to improve the activity and stability of metal electrode for NO_(3)^(-)removal,which opened up a new field for the efficient reduction of NO3-removal by metal electrode materials.展开更多
The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.Howeve...The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.展开更多
The addition of high-content crumb rubber(HCCR)in asphalt can effectively address waste tire pollution and provide sustainable environmental and economic advantages.However,the practical application of conventional ru...The addition of high-content crumb rubber(HCCR)in asphalt can effectively address waste tire pollution and provide sustainable environmental and economic advantages.However,the practical application of conventional rubberized binders is significantly limited by high viscosity and poor storage stability.To address these issues,researchers have pretreated crumb rubber(CR)with oil,but high-temperature performance remains insufficient.Therefore,this study aimed to optimize the viscosity,storage stability,and rheological properties of high-content crumb rubber-modified asphalt(HCCRMA)by varying the pretreatment levels of CR and incorporating various additives,including styrene-butadiene-styrene(SBS),deoiled asphalt(DA),or recycled low-density polyethylene(RLDPE).In addition,CR was pretreated with waste cooking oil(WCO)at various ratios,pre-swelling temperatures,and times.The results show that DA exhibits excellent storage stability and lower viscosity compared with other modifiers in HCCRMA,and the 4%RLDPE with pretreated HCCR has the greatest high-temperature rutting resistance.The inclusion of RLDPE increases the stiffness and elasticity of the modified asphalt,which results in greater high-temperature performance.Additionally,the fluorescence microscopy(FM)test confirms that SBS exhibits better dispersion than other modifiers and forms a more homogeneous phase separation in the HCCRMA.All in all,this research achieved an optimal balance of storage stability and rheological properties in asphalt modified with pretreated HCCR and 6%SBS,which provides a valuable reference for performance improvement of HCCR-modified binders.展开更多
Even in small concentrations,toxic metals like lead,cadmium,and mercury are dangerous to the environment and human health.Environmental monitoring depends on precisely identifying these heavy metals,particularly cadmi...Even in small concentrations,toxic metals like lead,cadmium,and mercury are dangerous to the environment and human health.Environmental monitoring depends on precisely identifying these heavy metals,particularly cadmium ions(Cd(Ⅱ)).In this study,we present a novel screen-printed carbon electrode(SPCE)modified with single crystallineα-Fe_(2)O_(3)nano-hexagons that functions as a sensor for detecting Cd(Ⅱ).The performance of the fabricated sensor was thoroughly assessed and compared with unmodified SPCE using the voltammetric method.The crystalline structure of the synthesizedα-Fe_(2)O_(3)nano-hexagons was confirmed through XRD,and surface analysis revealed an average diameter and thickness of 86 nm and 9 nm,respectively.Theα-Fe_(2)O_(3)modified SPCE yields a 7-fold enhanced response(at pH 5.0 vs.Ag/AgCl)to Cd(Ⅱ)than bare SPCE.The modified electrode effectively detects Cd(Ⅱ)with a linear response range of up to 333.0μmol/L and a detection limit of 0.65 nmol/L under ideal circumstances.This newly fabricated sensor offers significant potential for environmental monitoring applications by providing outstanding practicality,anti-interference ability,and repeatability for detecting Cd(Ⅱ)in water samples.展开更多
Oral immunization is an alternative or supplementary approach that can significantly improve dog vaccination coverage,especially for free-roaming dogs.Safe and effective oral rabies vaccines for dogs are still being s...Oral immunization is an alternative or supplementary approach that can significantly improve dog vaccination coverage,especially for free-roaming dogs.Safe and effective oral rabies vaccines for dogs are still being sought.In our previous studies,we generated a genetically modified rabies virus(RABV) ERA strain,rERAG_(333E),containing a mutation from arginine(Arg,R) to glutamic acid(Glu,E) at residue 333 of the G protein(G_(333E)).Our previous results demonstrated that rERAG_(333E) was safe for adult mice and dogs,and oral vaccination with rERAG_(333E) induced a strong and long-lasting protective immune response in dogs.Here,we further investigated the safety and immunogenicity of rERAG_(333E) in nontarget species,including suckling mice,rhesus monkeys,foxes,raccoon dogs,piglets,goats,and sheep.Suckling mice studies demonstrated that the G_(333E) mutation significantly reduced the virulence of the ERA strain.All of the suckling mice aged 10 days and above survived and showed no apparent signs of disease after intracerebral inoculation with rERAG_(333E).Animal studies demonstrated that rERAG_(333E) was safe in rhesus monkeys,foxes,raccoon dogs,piglets,goats,and sheep.None of those animals inoculated orally with 10 times the intended field dose of rERAG_(333E) showed abnormal clinical signs before and after the booster immunization with Rabvac 3,an inactivated rabies vaccine.Meanwhile,oral inoculation with rERAG_(333E) induced strong neutralizing antibody(NA) responses to RABV in rhesus monkeys,foxes,raccoon dogs,and piglets.These results demonstrated that rERAG_(333E) has the potential to serve as a safe oral rabies vaccine for dogs.展开更多
Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the elec...Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.展开更多
Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that p...Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that possess both high thermopower and rapid redox kinetics.This work addresses this challenge by leveraging our recently developed copper(Ⅰ/Ⅱ)(Cu^(+)/Cu^(2+))redox couple.We significantly enhance the performance of Cu-based liquid thermocells by integrating a thermosensitive crystallization process with etched carbon cloth electrodes,achieving synergistic improvements in thermodynamic and kinetic performance.The thermosensitive crystallization process establishes a persistent Cu^(2+)concentration gradient,boosting the thermopower from 1.47 to 2.93 mV K^(-1).Moreover,the etched carbon cloth electrodes provide a larger electroactive surface area and demonstrate a higher current density.Consequently,the optimized Cu^(+)/Cu^(2+)system achieved an exceptional normalized power density P_(max)(ΔT)^(-2)of 3.97 mW m^(-2)K^(-2).A thermocell module comprised of 20 cells directly power various electronic devices at a temperature difference of 40 K.This work successfully exhibits potential of Cu^(+)/Cu^(2+)redox couple in thermoelectric conversion and introduces a valuable redox couple for highperformance thermocells.展开更多
To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as wel...To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.展开更多
Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_...Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.展开更多
Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-...Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-scale preparation of the“integrated”phosphorus-based precatalyst(FeP-NiP)on nickel foam(NF),which is in situ reconstructed into a highly active and corrosion-resistant(Fe)NiOOH phase for OER.The interaction between phosphate anions(PO_(x)^(y-))and iron ions(Fe^(3+))tunes the electronic structure of the catalytic phase to further enhance OER kinetics.The integrated FeP-NiP@NF electrode exhibits low overpotentials for OER in alkaline water/seawater,requiring only 275/289,320/336,and 349/358 mV to reach 0.1,0.5,and 1.0 A cm^(−2),respectively.The in situ reconstructed PO_(x)^(y-)anion electrostatically repels Cl−in seawater electrolytes,allowing stable operation for over 7 days at 1.0 A cm^(−2) in extreme electrolytes(1.0 M KOH+seawater and 6.0 M KOH+seawater),demonstrating industrial-level stability.This study overcomes the complex synthesis limitations of P-based materials through innovative material design,opening new avenues for electrochemical energy conversion.展开更多
Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at –0.48...Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at –0.48 V (vs. SCE) in 0.1 mol/L phosphate solution (pH 7.0). The peak current in cyclic voltammogram is proportional to the scan rate. The peak potential of catalase is shifted to more negative value when the pH increases. Catalase can adsorb on the SWNTs modified electrode.展开更多
Electrochemistry of nitrate reductases (NR) incorporated into 2-aminoethanethiol self-assembled on the gold electrode and polyacrylamide cast on the pyrolytic graphite electrode was examined. NR on chemical modified ...Electrochemistry of nitrate reductases (NR) incorporated into 2-aminoethanethiol self-assembled on the gold electrode and polyacrylamide cast on the pyrolytic graphite electrode was examined. NR on chemical modified electrode showed electrochemical cyclic voltammetric responses in phosphate buffers.展开更多
The paper describes a controllable layer-by-layer （LBL） self-assembly modification technique of multi-walled carbon nanotubes （MWNTs） and poly（diallyldimethylammonium chloride） （PDDA） towards glassy carbon ele...The paper describes a controllable layer-by-layer （LBL） self-assembly modification technique of multi-walled carbon nanotubes （MWNTs） and poly（diallyldimethylammonium chloride） （PDDA） towards glassy carbon electrode （GCE）, Acetylcholinesterase （ACHE） was immobilized directly to the modified GCE by LBL self-assembly method, the activity value of AChE was detected by using i-t technique based on the modified Ellman method. Then the composition of carbaryl were detected by the enzyme electrode with 0.01U activity value and the detection limit of carbaryl is 10^- 12 g L ^-1 so the enzyme biosensor showed good properties for pesticides residue detection.展开更多
A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix. The ...A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix. The electrochemical behavior of captopril (CAP) at the surface of the modified electrode was investigated using electroanalytical methods. The modified electrode showed excellent electrocatalytic activity for the oxidation of CAP in aqueous solutions at physiological pH values. Cyclic voltammetric curves showed that the oxidation of CAP at the surface of the modified electrode reduced its overpotential by more than 290 mV. The modified electrode was used for detecting captopril using cyclic voltammetry and square wave voltammetry techniques. A calibration curve in the range of 0.03 to 2400 μmol/L was obtained that had a detection limit of 0.0096 μmol/L (3?) under the optimized conditions. The modified electrode was successfully used for the determination of captopril in pharmaceutical and biological samples.展开更多
Poly-L-lysine(PLL) was first electrodeposited onto the surface of a glassy carbon(GC) electrode.The PLL modified electrode was used to immobilize chloroperoxidase(CPO) via 1-[(3-dimethylamino)propyl]-3-ethylcarbodiimi...Poly-L-lysine(PLL) was first electrodeposited onto the surface of a glassy carbon(GC) electrode.The PLL modified electrode was used to immobilize chloroperoxidase(CPO) via 1-[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC).The electrochemical behaviors of immobilized CPO on PLL/GC electrode were investigated by cyclic voltammetry(CV).The CV results obtained showed that CPO was successfully immobilized on the PLL/GC electrode and a fast direct electron transfer between CPO and PLL-GC electrod...展开更多
A novel multiwall carbon nanotube-chitosan modified electrode has been prepared.The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbicacid into two well-defined peak by 212 mV. ...A novel multiwall carbon nanotube-chitosan modified electrode has been prepared.The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbicacid into two well-defined peak by 212 mV. The mechanism of discrimination of dopamine fromascorbic acid is discussed. Dopamine can be determined selectively with the carbonnanotube-chitosan modified electrode. The electrode shows good sensitivity, selectivity andstability.展开更多
The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hyd...The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.展开更多
The electrocatalytic oxidation of methanol at the platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes (Eu-Fe film) was investigated for the first time by cyclic voltammetry.Compared with the bar...The electrocatalytic oxidation of methanol at the platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes (Eu-Fe film) was investigated for the first time by cyclic voltammetry.Compared with the bare platinum electrode,the results showed that the modified electrode had excellent electrocatalytic activity for the oxidation of methanol;the oxidation peak potential shifted more negatively and the peak current increased about twenty times.The electrooxidation of methanol at the modified elect...展开更多
基金supported by the University of Seoul’s 2025 Research Fund.
文摘Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.
基金supported by the National Natural Science Foundation of China (No.22176068)the Research and Innovation Initiatives of WHPU (No.2022J03),the Hubei Provincial Natural Science Foundation (No.2023AFB938)the Scientific research project of Education Department of Hubei Province (No.D20221610).
文摘Nitrate(NO3-)is a widespread pollutant in high-salt wastewater and causes serious harm to human health.Although electrochemical removal of nitrate has been demonstrated to be a promising treatment method,the development of low-cost electro-catalysts is still challenging.In this work,a phosphate modified iron(P-Fe)cathode was prepared for electrochemical removal of nitrate in high-salt wastewater.The phosphate modification greatly improved the activity of iron,and the removal rate of nitrate on P-Fe was three times higher than that on Fe electrode.Further experiments and density functional theory(DFT)calculations demonstrated that the modification of phosphoric acid improved the stability and the activity of the zero-valent iron electrode effectively for NO_(3)^(-) removal.The nitrate was firstly electrochemically reduced to ammonium,and then reacted with the anodic generated hypochlorite to N_(2).In this study,a strategy was developed to improve the activity and stability of metal electrode for NO_(3)^(-)removal,which opened up a new field for the efficient reduction of NO3-removal by metal electrode materials.
基金financial support from the National Natural Science Foundation of China(52473248,52203123,52125301,22279070 and U21A20170)the State Key Laboratory of Polymer Materials Engineering(Grant No:sklpme 2023-1-05 and sklpme 2024-2-04)+3 种基金the Ministry of Science and Technology of China(No.2019YFA0705703)the Sichuan Science and Technology Program(2023NSFSC0991 and 2025ZNSFSC1411)the Fundamental Research Funds for the Central Universitiespartially sponsored by the Double First-Class Construction Funds of Sichuan University.
文摘The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.
基金supported by the Transportation Science and Technology Program of Henan Province(grant number:2023-4-2)the Key Research and Development Program of Ningxia Science and Technology Department(grant number:2022BEG02008)+2 种基金China Communications Construction Group Co.,Ltd.Science and Technology R&D Project(grant number:2021KJW02)the Research and Development Program of Henan Transportation Investment Group Co.,Ltd.(grant number:HNJT2025-1-9)the Postdoctoral Fellowship Program of CPSF(grand number:GZC20251139).
文摘The addition of high-content crumb rubber(HCCR)in asphalt can effectively address waste tire pollution and provide sustainable environmental and economic advantages.However,the practical application of conventional rubberized binders is significantly limited by high viscosity and poor storage stability.To address these issues,researchers have pretreated crumb rubber(CR)with oil,but high-temperature performance remains insufficient.Therefore,this study aimed to optimize the viscosity,storage stability,and rheological properties of high-content crumb rubber-modified asphalt(HCCRMA)by varying the pretreatment levels of CR and incorporating various additives,including styrene-butadiene-styrene(SBS),deoiled asphalt(DA),or recycled low-density polyethylene(RLDPE).In addition,CR was pretreated with waste cooking oil(WCO)at various ratios,pre-swelling temperatures,and times.The results show that DA exhibits excellent storage stability and lower viscosity compared with other modifiers in HCCRMA,and the 4%RLDPE with pretreated HCCR has the greatest high-temperature rutting resistance.The inclusion of RLDPE increases the stiffness and elasticity of the modified asphalt,which results in greater high-temperature performance.Additionally,the fluorescence microscopy(FM)test confirms that SBS exhibits better dispersion than other modifiers and forms a more homogeneous phase separation in the HCCRMA.All in all,this research achieved an optimal balance of storage stability and rheological properties in asphalt modified with pretreated HCCR and 6%SBS,which provides a valuable reference for performance improvement of HCCR-modified binders.
文摘Even in small concentrations,toxic metals like lead,cadmium,and mercury are dangerous to the environment and human health.Environmental monitoring depends on precisely identifying these heavy metals,particularly cadmium ions(Cd(Ⅱ)).In this study,we present a novel screen-printed carbon electrode(SPCE)modified with single crystallineα-Fe_(2)O_(3)nano-hexagons that functions as a sensor for detecting Cd(Ⅱ).The performance of the fabricated sensor was thoroughly assessed and compared with unmodified SPCE using the voltammetric method.The crystalline structure of the synthesizedα-Fe_(2)O_(3)nano-hexagons was confirmed through XRD,and surface analysis revealed an average diameter and thickness of 86 nm and 9 nm,respectively.Theα-Fe_(2)O_(3)modified SPCE yields a 7-fold enhanced response(at pH 5.0 vs.Ag/AgCl)to Cd(Ⅱ)than bare SPCE.The modified electrode effectively detects Cd(Ⅱ)with a linear response range of up to 333.0μmol/L and a detection limit of 0.65 nmol/L under ideal circumstances.This newly fabricated sensor offers significant potential for environmental monitoring applications by providing outstanding practicality,anti-interference ability,and repeatability for detecting Cd(Ⅱ)in water samples.
基金supported by the Natural Science Foundation of Heilongjiang Province,China (YQ2022C040)。
文摘Oral immunization is an alternative or supplementary approach that can significantly improve dog vaccination coverage,especially for free-roaming dogs.Safe and effective oral rabies vaccines for dogs are still being sought.In our previous studies,we generated a genetically modified rabies virus(RABV) ERA strain,rERAG_(333E),containing a mutation from arginine(Arg,R) to glutamic acid(Glu,E) at residue 333 of the G protein(G_(333E)).Our previous results demonstrated that rERAG_(333E) was safe for adult mice and dogs,and oral vaccination with rERAG_(333E) induced a strong and long-lasting protective immune response in dogs.Here,we further investigated the safety and immunogenicity of rERAG_(333E) in nontarget species,including suckling mice,rhesus monkeys,foxes,raccoon dogs,piglets,goats,and sheep.Suckling mice studies demonstrated that the G_(333E) mutation significantly reduced the virulence of the ERA strain.All of the suckling mice aged 10 days and above survived and showed no apparent signs of disease after intracerebral inoculation with rERAG_(333E).Animal studies demonstrated that rERAG_(333E) was safe in rhesus monkeys,foxes,raccoon dogs,piglets,goats,and sheep.None of those animals inoculated orally with 10 times the intended field dose of rERAG_(333E) showed abnormal clinical signs before and after the booster immunization with Rabvac 3,an inactivated rabies vaccine.Meanwhile,oral inoculation with rERAG_(333E) induced strong neutralizing antibody(NA) responses to RABV in rhesus monkeys,foxes,raccoon dogs,and piglets.These results demonstrated that rERAG_(333E) has the potential to serve as a safe oral rabies vaccine for dogs.
文摘Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.
基金financially supported by research grants from Innovative Research Group Project of National Natural Science Foundation of China(52021004)the National Key Research and Development Program of China(2022YFB3803300)+1 种基金the National Natural Science Foundation of China(62474026,62205140,12204071)the China Postdoctoral Science Foundation(2022M710532)。
文摘Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that possess both high thermopower and rapid redox kinetics.This work addresses this challenge by leveraging our recently developed copper(Ⅰ/Ⅱ)(Cu^(+)/Cu^(2+))redox couple.We significantly enhance the performance of Cu-based liquid thermocells by integrating a thermosensitive crystallization process with etched carbon cloth electrodes,achieving synergistic improvements in thermodynamic and kinetic performance.The thermosensitive crystallization process establishes a persistent Cu^(2+)concentration gradient,boosting the thermopower from 1.47 to 2.93 mV K^(-1).Moreover,the etched carbon cloth electrodes provide a larger electroactive surface area and demonstrate a higher current density.Consequently,the optimized Cu^(+)/Cu^(2+)system achieved an exceptional normalized power density P_(max)(ΔT)^(-2)of 3.97 mW m^(-2)K^(-2).A thermocell module comprised of 20 cells directly power various electronic devices at a temperature difference of 40 K.This work successfully exhibits potential of Cu^(+)/Cu^(2+)redox couple in thermoelectric conversion and introduces a valuable redox couple for highperformance thermocells.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.NRF-2021M3H4A1A02048529)the Ministry of Trade,Industry and Energy(MOTIE)of the Korean government under grant No.RS-2022-00155854support from the DGIST Supercomputing and Big Data Center.
文摘To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.
基金funding from the National Natural Science Foundation of China (Award 91745203) supplemented by Central Universities’ Basic Research Funds.
文摘Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.
基金funding support from Natural Science Foundation of Shanghai(Grant No.23ZR1443900)the National Natural Science Foundation of China(Grant Nos.22178309,22476131 and 22176127)。
文摘Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-scale preparation of the“integrated”phosphorus-based precatalyst(FeP-NiP)on nickel foam(NF),which is in situ reconstructed into a highly active and corrosion-resistant(Fe)NiOOH phase for OER.The interaction between phosphate anions(PO_(x)^(y-))and iron ions(Fe^(3+))tunes the electronic structure of the catalytic phase to further enhance OER kinetics.The integrated FeP-NiP@NF electrode exhibits low overpotentials for OER in alkaline water/seawater,requiring only 275/289,320/336,and 349/358 mV to reach 0.1,0.5,and 1.0 A cm^(−2),respectively.The in situ reconstructed PO_(x)^(y-)anion electrostatically repels Cl−in seawater electrolytes,allowing stable operation for over 7 days at 1.0 A cm^(−2) in extreme electrolytes(1.0 M KOH+seawater and 6.0 M KOH+seawater),demonstrating industrial-level stability.This study overcomes the complex synthesis limitations of P-based materials through innovative material design,opening new avenues for electrochemical energy conversion.
基金supported by the National Natural Science Foundation of China(No.50134020)by the Foundation of Doctoral Programs of the Ministry of Education,(No.20010001028).
文摘Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at –0.48 V (vs. SCE) in 0.1 mol/L phosphate solution (pH 7.0). The peak current in cyclic voltammogram is proportional to the scan rate. The peak potential of catalase is shifted to more negative value when the pH increases. Catalase can adsorb on the SWNTs modified electrode.
基金We are grateful to the NNSFC (29973026), BNSF (2992007) Foundation for University Key Teacher by the Ministry of Education for the provision of financial support.
文摘Electrochemistry of nitrate reductases (NR) incorporated into 2-aminoethanethiol self-assembled on the gold electrode and polyacrylamide cast on the pyrolytic graphite electrode was examined. NR on chemical modified electrode showed electrochemical cyclic voltammetric responses in phosphate buffers.
文摘The paper describes a controllable layer-by-layer （LBL） self-assembly modification technique of multi-walled carbon nanotubes （MWNTs） and poly（diallyldimethylammonium chloride） （PDDA） towards glassy carbon electrode （GCE）, Acetylcholinesterase （ACHE） was immobilized directly to the modified GCE by LBL self-assembly method, the activity value of AChE was detected by using i-t technique based on the modified Ellman method. Then the composition of carbaryl were detected by the enzyme electrode with 0.01U activity value and the detection limit of carbaryl is 10^- 12 g L ^-1 so the enzyme biosensor showed good properties for pesticides residue detection.
文摘A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix. The electrochemical behavior of captopril (CAP) at the surface of the modified electrode was investigated using electroanalytical methods. The modified electrode showed excellent electrocatalytic activity for the oxidation of CAP in aqueous solutions at physiological pH values. Cyclic voltammetric curves showed that the oxidation of CAP at the surface of the modified electrode reduced its overpotential by more than 290 mV. The modified electrode was used for detecting captopril using cyclic voltammetry and square wave voltammetry techniques. A calibration curve in the range of 0.03 to 2400 μmol/L was obtained that had a detection limit of 0.0096 μmol/L (3?) under the optimized conditions. The modified electrode was successfully used for the determination of captopril in pharmaceutical and biological samples.
基金supported by grant from National Natural Science Foundation of China(No.20775049).
文摘Poly-L-lysine(PLL) was first electrodeposited onto the surface of a glassy carbon(GC) electrode.The PLL modified electrode was used to immobilize chloroperoxidase(CPO) via 1-[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC).The electrochemical behaviors of immobilized CPO on PLL/GC electrode were investigated by cyclic voltammetry(CV).The CV results obtained showed that CPO was successfully immobilized on the PLL/GC electrode and a fast direct electron transfer between CPO and PLL-GC electrod...
文摘A novel multiwall carbon nanotube-chitosan modified electrode has been prepared.The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbicacid into two well-defined peak by 212 mV. The mechanism of discrimination of dopamine fromascorbic acid is discussed. Dopamine can be determined selectively with the carbonnanotube-chitosan modified electrode. The electrode shows good sensitivity, selectivity andstability.
文摘The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.
基金the Project of Natural Science Foundation of Gansu Province of their financial supports(No. 096RJZA117)
文摘The electrocatalytic oxidation of methanol at the platinum electrode modified with Eu-Fe cyanide-bridged binuclear complexes (Eu-Fe film) was investigated for the first time by cyclic voltammetry.Compared with the bare platinum electrode,the results showed that the modified electrode had excellent electrocatalytic activity for the oxidation of methanol;the oxidation peak potential shifted more negatively and the peak current increased about twenty times.The electrooxidation of methanol at the modified elect...
